1/* 2 This program is free software; you can redistribute it and/or 3 modify it under the terms of the GNU General Public License 4 as published by the Free Software Foundation; either version 2 5 of the License, or (at your option) any later version. 6 7 This program is distributed in the hope that it will be useful, 8 but WITHOUT ANY WARRANTY; without even the implied warranty of 9 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 10 GNU General Public License for more details. 11 12 13*/ 14 15#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 16 17#define DRV_NAME "uli526x" 18#define DRV_VERSION "0.9.3" 19#define DRV_RELDATE "2005-7-29" 20 21#include <linux/module.h> 22 23#include <linux/kernel.h> 24#include <linux/string.h> 25#include <linux/timer.h> 26#include <linux/errno.h> 27#include <linux/ioport.h> 28#include <linux/interrupt.h> 29#include <linux/pci.h> 30#include <linux/init.h> 31#include <linux/netdevice.h> 32#include <linux/etherdevice.h> 33#include <linux/ethtool.h> 34#include <linux/skbuff.h> 35#include <linux/delay.h> 36#include <linux/spinlock.h> 37#include <linux/dma-mapping.h> 38#include <linux/bitops.h> 39 40#include <asm/processor.h> 41#include <asm/io.h> 42#include <asm/dma.h> 43#include <asm/uaccess.h> 44 45#define uw32(reg, val) iowrite32(val, ioaddr + (reg)) 46#define ur32(reg) ioread32(ioaddr + (reg)) 47 48/* Board/System/Debug information/definition ---------------- */ 49#define PCI_ULI5261_ID 0x526110B9 /* ULi M5261 ID*/ 50#define PCI_ULI5263_ID 0x526310B9 /* ULi M5263 ID*/ 51 52#define ULI526X_IO_SIZE 0x100 53#define TX_DESC_CNT 0x20 /* Allocated Tx descriptors */ 54#define RX_DESC_CNT 0x30 /* Allocated Rx descriptors */ 55#define TX_FREE_DESC_CNT (TX_DESC_CNT - 2) /* Max TX packet count */ 56#define TX_WAKE_DESC_CNT (TX_DESC_CNT - 3) /* TX wakeup count */ 57#define DESC_ALL_CNT (TX_DESC_CNT + RX_DESC_CNT) 58#define TX_BUF_ALLOC 0x600 59#define RX_ALLOC_SIZE 0x620 60#define ULI526X_RESET 1 61#define CR0_DEFAULT 0 62#define CR6_DEFAULT 0x22200000 63#define CR7_DEFAULT 0x180c1 64#define CR15_DEFAULT 0x06 /* TxJabber RxWatchdog */ 65#define TDES0_ERR_MASK 0x4302 /* TXJT, LC, EC, FUE */ 66#define MAX_PACKET_SIZE 1514 67#define ULI5261_MAX_MULTICAST 14 68#define RX_COPY_SIZE 100 69#define MAX_CHECK_PACKET 0x8000 70 71#define ULI526X_10MHF 0 72#define ULI526X_100MHF 1 73#define ULI526X_10MFD 4 74#define ULI526X_100MFD 5 75#define ULI526X_AUTO 8 76 77#define ULI526X_TXTH_72 0x400000 /* TX TH 72 byte */ 78#define ULI526X_TXTH_96 0x404000 /* TX TH 96 byte */ 79#define ULI526X_TXTH_128 0x0000 /* TX TH 128 byte */ 80#define ULI526X_TXTH_256 0x4000 /* TX TH 256 byte */ 81#define ULI526X_TXTH_512 0x8000 /* TX TH 512 byte */ 82#define ULI526X_TXTH_1K 0xC000 /* TX TH 1K byte */ 83 84#define ULI526X_TIMER_WUT (jiffies + HZ * 1)/* timer wakeup time : 1 second */ 85#define ULI526X_TX_TIMEOUT ((16*HZ)/2) /* tx packet time-out time 8 s" */ 86#define ULI526X_TX_KICK (4*HZ/2) /* tx packet Kick-out time 2 s" */ 87 88#define ULI526X_DBUG(dbug_now, msg, value) \ 89do { \ 90 if (uli526x_debug || (dbug_now)) \ 91 pr_err("%s %lx\n", (msg), (long) (value)); \ 92} while (0) 93 94#define SHOW_MEDIA_TYPE(mode) \ 95 pr_err("Change Speed to %sMhz %s duplex\n", \ 96 mode & 1 ? "100" : "10", \ 97 mode & 4 ? "full" : "half"); 98 99 100/* CR9 definition: SROM/MII */ 101#define CR9_SROM_READ 0x4800 102#define CR9_SRCS 0x1 103#define CR9_SRCLK 0x2 104#define CR9_CRDOUT 0x8 105#define SROM_DATA_0 0x0 106#define SROM_DATA_1 0x4 107#define PHY_DATA_1 0x20000 108#define PHY_DATA_0 0x00000 109#define MDCLKH 0x10000 110 111#define PHY_POWER_DOWN 0x800 112 113#define SROM_V41_CODE 0x14 114 115/* Structure/enum declaration ------------------------------- */ 116struct tx_desc { 117 __le32 tdes0, tdes1, tdes2, tdes3; /* Data for the card */ 118 char *tx_buf_ptr; /* Data for us */ 119 struct tx_desc *next_tx_desc; 120} __attribute__(( aligned(32) )); 121 122struct rx_desc { 123 __le32 rdes0, rdes1, rdes2, rdes3; /* Data for the card */ 124 struct sk_buff *rx_skb_ptr; /* Data for us */ 125 struct rx_desc *next_rx_desc; 126} __attribute__(( aligned(32) )); 127 128struct uli526x_board_info { 129 struct uli_phy_ops { 130 void (*write)(struct uli526x_board_info *, u8, u8, u16); 131 u16 (*read)(struct uli526x_board_info *, u8, u8); 132 } phy; 133 struct net_device *next_dev; /* next device */ 134 struct pci_dev *pdev; /* PCI device */ 135 spinlock_t lock; 136 137 void __iomem *ioaddr; /* I/O base address */ 138 u32 cr0_data; 139 u32 cr5_data; 140 u32 cr6_data; 141 u32 cr7_data; 142 u32 cr15_data; 143 144 /* pointer for memory physical address */ 145 dma_addr_t buf_pool_dma_ptr; /* Tx buffer pool memory */ 146 dma_addr_t buf_pool_dma_start; /* Tx buffer pool align dword */ 147 dma_addr_t desc_pool_dma_ptr; /* descriptor pool memory */ 148 dma_addr_t first_tx_desc_dma; 149 dma_addr_t first_rx_desc_dma; 150 151 /* descriptor pointer */ 152 unsigned char *buf_pool_ptr; /* Tx buffer pool memory */ 153 unsigned char *buf_pool_start; /* Tx buffer pool align dword */ 154 unsigned char *desc_pool_ptr; /* descriptor pool memory */ 155 struct tx_desc *first_tx_desc; 156 struct tx_desc *tx_insert_ptr; 157 struct tx_desc *tx_remove_ptr; 158 struct rx_desc *first_rx_desc; 159 struct rx_desc *rx_insert_ptr; 160 struct rx_desc *rx_ready_ptr; /* packet come pointer */ 161 unsigned long tx_packet_cnt; /* transmitted packet count */ 162 unsigned long rx_avail_cnt; /* available rx descriptor count */ 163 unsigned long interval_rx_cnt; /* rx packet count a callback time */ 164 165 u16 dbug_cnt; 166 u16 NIC_capability; /* NIC media capability */ 167 u16 PHY_reg4; /* Saved Phyxcer register 4 value */ 168 169 u8 media_mode; /* user specify media mode */ 170 u8 op_mode; /* real work media mode */ 171 u8 phy_addr; 172 u8 link_failed; /* Ever link failed */ 173 u8 wait_reset; /* Hardware failed, need to reset */ 174 struct timer_list timer; 175 176 /* Driver defined statistic counter */ 177 unsigned long tx_fifo_underrun; 178 unsigned long tx_loss_carrier; 179 unsigned long tx_no_carrier; 180 unsigned long tx_late_collision; 181 unsigned long tx_excessive_collision; 182 unsigned long tx_jabber_timeout; 183 unsigned long reset_count; 184 unsigned long reset_cr8; 185 unsigned long reset_fatal; 186 unsigned long reset_TXtimeout; 187 188 /* NIC SROM data */ 189 unsigned char srom[128]; 190 u8 init; 191}; 192 193enum uli526x_offsets { 194 DCR0 = 0x00, DCR1 = 0x08, DCR2 = 0x10, DCR3 = 0x18, DCR4 = 0x20, 195 DCR5 = 0x28, DCR6 = 0x30, DCR7 = 0x38, DCR8 = 0x40, DCR9 = 0x48, 196 DCR10 = 0x50, DCR11 = 0x58, DCR12 = 0x60, DCR13 = 0x68, DCR14 = 0x70, 197 DCR15 = 0x78 198}; 199 200enum uli526x_CR6_bits { 201 CR6_RXSC = 0x2, CR6_PBF = 0x8, CR6_PM = 0x40, CR6_PAM = 0x80, 202 CR6_FDM = 0x200, CR6_TXSC = 0x2000, CR6_STI = 0x100000, 203 CR6_SFT = 0x200000, CR6_RXA = 0x40000000, CR6_NO_PURGE = 0x20000000 204}; 205 206/* Global variable declaration ----------------------------- */ 207static int printed_version; 208static const char version[] = 209 "ULi M5261/M5263 net driver, version " DRV_VERSION " (" DRV_RELDATE ")"; 210 211static int uli526x_debug; 212static unsigned char uli526x_media_mode = ULI526X_AUTO; 213static u32 uli526x_cr6_user_set; 214 215/* For module input parameter */ 216static int debug; 217static u32 cr6set; 218static int mode = 8; 219 220/* function declaration ------------------------------------- */ 221static int uli526x_open(struct net_device *); 222static netdev_tx_t uli526x_start_xmit(struct sk_buff *, 223 struct net_device *); 224static int uli526x_stop(struct net_device *); 225static void uli526x_set_filter_mode(struct net_device *); 226static const struct ethtool_ops netdev_ethtool_ops; 227static u16 read_srom_word(struct uli526x_board_info *, int); 228static irqreturn_t uli526x_interrupt(int, void *); 229#ifdef CONFIG_NET_POLL_CONTROLLER 230static void uli526x_poll(struct net_device *dev); 231#endif 232static void uli526x_descriptor_init(struct net_device *, void __iomem *); 233static void allocate_rx_buffer(struct net_device *); 234static void update_cr6(u32, void __iomem *); 235static void send_filter_frame(struct net_device *, int); 236static u16 phy_readby_cr9(struct uli526x_board_info *, u8, u8); 237static u16 phy_readby_cr10(struct uli526x_board_info *, u8, u8); 238static void phy_writeby_cr9(struct uli526x_board_info *, u8, u8, u16); 239static void phy_writeby_cr10(struct uli526x_board_info *, u8, u8, u16); 240static void phy_write_1bit(struct uli526x_board_info *db, u32); 241static u16 phy_read_1bit(struct uli526x_board_info *db); 242static u8 uli526x_sense_speed(struct uli526x_board_info *); 243static void uli526x_process_mode(struct uli526x_board_info *); 244static void uli526x_timer(unsigned long); 245static void uli526x_rx_packet(struct net_device *, struct uli526x_board_info *); 246static void uli526x_free_tx_pkt(struct net_device *, struct uli526x_board_info *); 247static void uli526x_reuse_skb(struct uli526x_board_info *, struct sk_buff *); 248static void uli526x_dynamic_reset(struct net_device *); 249static void uli526x_free_rxbuffer(struct uli526x_board_info *); 250static void uli526x_init(struct net_device *); 251static void uli526x_set_phyxcer(struct uli526x_board_info *); 252 253static void srom_clk_write(struct uli526x_board_info *db, u32 data) 254{ 255 void __iomem *ioaddr = db->ioaddr; 256 257 uw32(DCR9, data | CR9_SROM_READ | CR9_SRCS); 258 udelay(5); 259 uw32(DCR9, data | CR9_SROM_READ | CR9_SRCS | CR9_SRCLK); 260 udelay(5); 261 uw32(DCR9, data | CR9_SROM_READ | CR9_SRCS); 262 udelay(5); 263} 264 265/* ULI526X network board routine ---------------------------- */ 266 267static const struct net_device_ops netdev_ops = { 268 .ndo_open = uli526x_open, 269 .ndo_stop = uli526x_stop, 270 .ndo_start_xmit = uli526x_start_xmit, 271 .ndo_set_rx_mode = uli526x_set_filter_mode, 272 .ndo_change_mtu = eth_change_mtu, 273 .ndo_set_mac_address = eth_mac_addr, 274 .ndo_validate_addr = eth_validate_addr, 275#ifdef CONFIG_NET_POLL_CONTROLLER 276 .ndo_poll_controller = uli526x_poll, 277#endif 278}; 279 280/* 281 * Search ULI526X board, allocate space and register it 282 */ 283 284static int uli526x_init_one(struct pci_dev *pdev, 285 const struct pci_device_id *ent) 286{ 287 struct uli526x_board_info *db; /* board information structure */ 288 struct net_device *dev; 289 void __iomem *ioaddr; 290 int i, err; 291 292 ULI526X_DBUG(0, "uli526x_init_one()", 0); 293 294 if (!printed_version++) 295 pr_info("%s\n", version); 296 297 /* Init network device */ 298 dev = alloc_etherdev(sizeof(*db)); 299 if (dev == NULL) 300 return -ENOMEM; 301 SET_NETDEV_DEV(dev, &pdev->dev); 302 303 if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) { 304 pr_warn("32-bit PCI DMA not available\n"); 305 err = -ENODEV; 306 goto err_out_free; 307 } 308 309 /* Enable Master/IO access, Disable memory access */ 310 err = pci_enable_device(pdev); 311 if (err) 312 goto err_out_free; 313 314 if (!pci_resource_start(pdev, 0)) { 315 pr_err("I/O base is zero\n"); 316 err = -ENODEV; 317 goto err_out_disable; 318 } 319 320 if (pci_resource_len(pdev, 0) < (ULI526X_IO_SIZE) ) { 321 pr_err("Allocated I/O size too small\n"); 322 err = -ENODEV; 323 goto err_out_disable; 324 } 325 326 err = pci_request_regions(pdev, DRV_NAME); 327 if (err < 0) { 328 pr_err("Failed to request PCI regions\n"); 329 goto err_out_disable; 330 } 331 332 /* Init system & device */ 333 db = netdev_priv(dev); 334 335 /* Allocate Tx/Rx descriptor memory */ 336 err = -ENOMEM; 337 338 db->desc_pool_ptr = pci_alloc_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20, &db->desc_pool_dma_ptr); 339 if (!db->desc_pool_ptr) 340 goto err_out_release; 341 342 db->buf_pool_ptr = pci_alloc_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, &db->buf_pool_dma_ptr); 343 if (!db->buf_pool_ptr) 344 goto err_out_free_tx_desc; 345 346 db->first_tx_desc = (struct tx_desc *) db->desc_pool_ptr; 347 db->first_tx_desc_dma = db->desc_pool_dma_ptr; 348 db->buf_pool_start = db->buf_pool_ptr; 349 db->buf_pool_dma_start = db->buf_pool_dma_ptr; 350 351 switch (ent->driver_data) { 352 case PCI_ULI5263_ID: 353 db->phy.write = phy_writeby_cr10; 354 db->phy.read = phy_readby_cr10; 355 break; 356 default: 357 db->phy.write = phy_writeby_cr9; 358 db->phy.read = phy_readby_cr9; 359 break; 360 } 361 362 /* IO region. */ 363 ioaddr = pci_iomap(pdev, 0, 0); 364 if (!ioaddr) 365 goto err_out_free_tx_buf; 366 367 db->ioaddr = ioaddr; 368 db->pdev = pdev; 369 db->init = 1; 370 371 pci_set_drvdata(pdev, dev); 372 373 /* Register some necessary functions */ 374 dev->netdev_ops = &netdev_ops; 375 dev->ethtool_ops = &netdev_ethtool_ops; 376 377 spin_lock_init(&db->lock); 378 379 380 /* read 64 word srom data */ 381 for (i = 0; i < 64; i++) 382 ((__le16 *) db->srom)[i] = cpu_to_le16(read_srom_word(db, i)); 383 384 /* Set Node address */ 385 if(((u16 *) db->srom)[0] == 0xffff || ((u16 *) db->srom)[0] == 0) /* SROM absent, so read MAC address from ID Table */ 386 { 387 uw32(DCR0, 0x10000); //Diagnosis mode 388 uw32(DCR13, 0x1c0); //Reset dianostic pointer port 389 uw32(DCR14, 0); //Clear reset port 390 uw32(DCR14, 0x10); //Reset ID Table pointer 391 uw32(DCR14, 0); //Clear reset port 392 uw32(DCR13, 0); //Clear CR13 393 uw32(DCR13, 0x1b0); //Select ID Table access port 394 //Read MAC address from CR14 395 for (i = 0; i < 6; i++) 396 dev->dev_addr[i] = ur32(DCR14); 397 //Read end 398 uw32(DCR13, 0); //Clear CR13 399 uw32(DCR0, 0); //Clear CR0 400 udelay(10); 401 } 402 else /*Exist SROM*/ 403 { 404 for (i = 0; i < 6; i++) 405 dev->dev_addr[i] = db->srom[20 + i]; 406 } 407 err = register_netdev (dev); 408 if (err) 409 goto err_out_unmap; 410 411 netdev_info(dev, "ULi M%04lx at pci%s, %pM, irq %d\n", 412 ent->driver_data >> 16, pci_name(pdev), 413 dev->dev_addr, pdev->irq); 414 415 pci_set_master(pdev); 416 417 return 0; 418 419err_out_unmap: 420 pci_iounmap(pdev, db->ioaddr); 421err_out_free_tx_buf: 422 pci_free_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, 423 db->buf_pool_ptr, db->buf_pool_dma_ptr); 424err_out_free_tx_desc: 425 pci_free_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20, 426 db->desc_pool_ptr, db->desc_pool_dma_ptr); 427err_out_release: 428 pci_release_regions(pdev); 429err_out_disable: 430 pci_disable_device(pdev); 431err_out_free: 432 free_netdev(dev); 433 434 return err; 435} 436 437 438static void uli526x_remove_one(struct pci_dev *pdev) 439{ 440 struct net_device *dev = pci_get_drvdata(pdev); 441 struct uli526x_board_info *db = netdev_priv(dev); 442 443 unregister_netdev(dev); 444 pci_iounmap(pdev, db->ioaddr); 445 pci_free_consistent(db->pdev, sizeof(struct tx_desc) * 446 DESC_ALL_CNT + 0x20, db->desc_pool_ptr, 447 db->desc_pool_dma_ptr); 448 pci_free_consistent(db->pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, 449 db->buf_pool_ptr, db->buf_pool_dma_ptr); 450 pci_release_regions(pdev); 451 pci_disable_device(pdev); 452 free_netdev(dev); 453} 454 455 456/* 457 * Open the interface. 458 * The interface is opened whenever "ifconfig" activates it. 459 */ 460 461static int uli526x_open(struct net_device *dev) 462{ 463 int ret; 464 struct uli526x_board_info *db = netdev_priv(dev); 465 466 ULI526X_DBUG(0, "uli526x_open", 0); 467 468 /* system variable init */ 469 db->cr6_data = CR6_DEFAULT | uli526x_cr6_user_set; 470 db->tx_packet_cnt = 0; 471 db->rx_avail_cnt = 0; 472 db->link_failed = 1; 473 netif_carrier_off(dev); 474 db->wait_reset = 0; 475 476 db->NIC_capability = 0xf; /* All capability*/ 477 db->PHY_reg4 = 0x1e0; 478 479 /* CR6 operation mode decision */ 480 db->cr6_data |= ULI526X_TXTH_256; 481 db->cr0_data = CR0_DEFAULT; 482 483 /* Initialize ULI526X board */ 484 uli526x_init(dev); 485 486 ret = request_irq(db->pdev->irq, uli526x_interrupt, IRQF_SHARED, 487 dev->name, dev); 488 if (ret) 489 return ret; 490 491 /* Active System Interface */ 492 netif_wake_queue(dev); 493 494 /* set and active a timer process */ 495 init_timer(&db->timer); 496 db->timer.expires = ULI526X_TIMER_WUT + HZ * 2; 497 db->timer.data = (unsigned long)dev; 498 db->timer.function = uli526x_timer; 499 add_timer(&db->timer); 500 501 return 0; 502} 503 504 505/* Initialize ULI526X board 506 * Reset ULI526X board 507 * Initialize TX/Rx descriptor chain structure 508 * Send the set-up frame 509 * Enable Tx/Rx machine 510 */ 511 512static void uli526x_init(struct net_device *dev) 513{ 514 struct uli526x_board_info *db = netdev_priv(dev); 515 struct uli_phy_ops *phy = &db->phy; 516 void __iomem *ioaddr = db->ioaddr; 517 u8 phy_tmp; 518 u8 timeout; 519 u16 phy_reg_reset; 520 521 522 ULI526X_DBUG(0, "uli526x_init()", 0); 523 524 /* Reset M526x MAC controller */ 525 uw32(DCR0, ULI526X_RESET); /* RESET MAC */ 526 udelay(100); 527 uw32(DCR0, db->cr0_data); 528 udelay(5); 529 530 /* Phy addr : In some boards,M5261/M5263 phy address != 1 */ 531 db->phy_addr = 1; 532 for (phy_tmp = 0; phy_tmp < 32; phy_tmp++) { 533 u16 phy_value; 534 535 phy_value = phy->read(db, phy_tmp, 3); //peer add 536 if (phy_value != 0xffff && phy_value != 0) { 537 db->phy_addr = phy_tmp; 538 break; 539 } 540 } 541 542 if (phy_tmp == 32) 543 pr_warn("Can not find the phy address!!!\n"); 544 /* Parser SROM and media mode */ 545 db->media_mode = uli526x_media_mode; 546 547 /* phyxcer capability setting */ 548 phy_reg_reset = phy->read(db, db->phy_addr, 0); 549 phy_reg_reset = (phy_reg_reset | 0x8000); 550 phy->write(db, db->phy_addr, 0, phy_reg_reset); 551 552 /* See IEEE 802.3-2002.pdf (Section 2, Chapter "22.2.4 Management 553 * functions") or phy data sheet for details on phy reset 554 */ 555 udelay(500); 556 timeout = 10; 557 while (timeout-- && phy->read(db, db->phy_addr, 0) & 0x8000) 558 udelay(100); 559 560 /* Process Phyxcer Media Mode */ 561 uli526x_set_phyxcer(db); 562 563 /* Media Mode Process */ 564 if ( !(db->media_mode & ULI526X_AUTO) ) 565 db->op_mode = db->media_mode; /* Force Mode */ 566 567 /* Initialize Transmit/Receive descriptor and CR3/4 */ 568 uli526x_descriptor_init(dev, ioaddr); 569 570 /* Init CR6 to program M526X operation */ 571 update_cr6(db->cr6_data, ioaddr); 572 573 /* Send setup frame */ 574 send_filter_frame(dev, netdev_mc_count(dev)); /* M5261/M5263 */ 575 576 /* Init CR7, interrupt active bit */ 577 db->cr7_data = CR7_DEFAULT; 578 uw32(DCR7, db->cr7_data); 579 580 /* Init CR15, Tx jabber and Rx watchdog timer */ 581 uw32(DCR15, db->cr15_data); 582 583 /* Enable ULI526X Tx/Rx function */ 584 db->cr6_data |= CR6_RXSC | CR6_TXSC; 585 update_cr6(db->cr6_data, ioaddr); 586} 587 588 589/* 590 * Hardware start transmission. 591 * Send a packet to media from the upper layer. 592 */ 593 594static netdev_tx_t uli526x_start_xmit(struct sk_buff *skb, 595 struct net_device *dev) 596{ 597 struct uli526x_board_info *db = netdev_priv(dev); 598 void __iomem *ioaddr = db->ioaddr; 599 struct tx_desc *txptr; 600 unsigned long flags; 601 602 ULI526X_DBUG(0, "uli526x_start_xmit", 0); 603 604 /* Resource flag check */ 605 netif_stop_queue(dev); 606 607 /* Too large packet check */ 608 if (skb->len > MAX_PACKET_SIZE) { 609 netdev_err(dev, "big packet = %d\n", (u16)skb->len); 610 dev_kfree_skb_any(skb); 611 return NETDEV_TX_OK; 612 } 613 614 spin_lock_irqsave(&db->lock, flags); 615 616 /* No Tx resource check, it never happen nromally */ 617 if (db->tx_packet_cnt >= TX_FREE_DESC_CNT) { 618 spin_unlock_irqrestore(&db->lock, flags); 619 netdev_err(dev, "No Tx resource %ld\n", db->tx_packet_cnt); 620 return NETDEV_TX_BUSY; 621 } 622 623 /* Disable NIC interrupt */ 624 uw32(DCR7, 0); 625 626 /* transmit this packet */ 627 txptr = db->tx_insert_ptr; 628 skb_copy_from_linear_data(skb, txptr->tx_buf_ptr, skb->len); 629 txptr->tdes1 = cpu_to_le32(0xe1000000 | skb->len); 630 631 /* Point to next transmit free descriptor */ 632 db->tx_insert_ptr = txptr->next_tx_desc; 633 634 /* Transmit Packet Process */ 635 if (db->tx_packet_cnt < TX_DESC_CNT) { 636 txptr->tdes0 = cpu_to_le32(0x80000000); /* Set owner bit */ 637 db->tx_packet_cnt++; /* Ready to send */ 638 uw32(DCR1, 0x1); /* Issue Tx polling */ 639 dev->trans_start = jiffies; /* saved time stamp */ 640 } 641 642 /* Tx resource check */ 643 if ( db->tx_packet_cnt < TX_FREE_DESC_CNT ) 644 netif_wake_queue(dev); 645 646 /* Restore CR7 to enable interrupt */ 647 spin_unlock_irqrestore(&db->lock, flags); 648 uw32(DCR7, db->cr7_data); 649 650 /* free this SKB */ 651 dev_consume_skb_any(skb); 652 653 return NETDEV_TX_OK; 654} 655 656 657/* 658 * Stop the interface. 659 * The interface is stopped when it is brought. 660 */ 661 662static int uli526x_stop(struct net_device *dev) 663{ 664 struct uli526x_board_info *db = netdev_priv(dev); 665 void __iomem *ioaddr = db->ioaddr; 666 667 /* disable system */ 668 netif_stop_queue(dev); 669 670 /* deleted timer */ 671 del_timer_sync(&db->timer); 672 673 /* Reset & stop ULI526X board */ 674 uw32(DCR0, ULI526X_RESET); 675 udelay(5); 676 db->phy.write(db, db->phy_addr, 0, 0x8000); 677 678 /* free interrupt */ 679 free_irq(db->pdev->irq, dev); 680 681 /* free allocated rx buffer */ 682 uli526x_free_rxbuffer(db); 683 684 return 0; 685} 686 687 688/* 689 * M5261/M5263 insterrupt handler 690 * receive the packet to upper layer, free the transmitted packet 691 */ 692 693static irqreturn_t uli526x_interrupt(int irq, void *dev_id) 694{ 695 struct net_device *dev = dev_id; 696 struct uli526x_board_info *db = netdev_priv(dev); 697 void __iomem *ioaddr = db->ioaddr; 698 unsigned long flags; 699 700 spin_lock_irqsave(&db->lock, flags); 701 uw32(DCR7, 0); 702 703 /* Got ULI526X status */ 704 db->cr5_data = ur32(DCR5); 705 uw32(DCR5, db->cr5_data); 706 if ( !(db->cr5_data & 0x180c1) ) { 707 /* Restore CR7 to enable interrupt mask */ 708 uw32(DCR7, db->cr7_data); 709 spin_unlock_irqrestore(&db->lock, flags); 710 return IRQ_HANDLED; 711 } 712 713 /* Check system status */ 714 if (db->cr5_data & 0x2000) { 715 /* system bus error happen */ 716 ULI526X_DBUG(1, "System bus error happen. CR5=", db->cr5_data); 717 db->reset_fatal++; 718 db->wait_reset = 1; /* Need to RESET */ 719 spin_unlock_irqrestore(&db->lock, flags); 720 return IRQ_HANDLED; 721 } 722 723 /* Received the coming packet */ 724 if ( (db->cr5_data & 0x40) && db->rx_avail_cnt ) 725 uli526x_rx_packet(dev, db); 726 727 /* reallocate rx descriptor buffer */ 728 if (db->rx_avail_cnt<RX_DESC_CNT) 729 allocate_rx_buffer(dev); 730 731 /* Free the transmitted descriptor */ 732 if ( db->cr5_data & 0x01) 733 uli526x_free_tx_pkt(dev, db); 734 735 /* Restore CR7 to enable interrupt mask */ 736 uw32(DCR7, db->cr7_data); 737 738 spin_unlock_irqrestore(&db->lock, flags); 739 return IRQ_HANDLED; 740} 741 742#ifdef CONFIG_NET_POLL_CONTROLLER 743static void uli526x_poll(struct net_device *dev) 744{ 745 struct uli526x_board_info *db = netdev_priv(dev); 746 747 /* ISR grabs the irqsave lock, so this should be safe */ 748 uli526x_interrupt(db->pdev->irq, dev); 749} 750#endif 751 752/* 753 * Free TX resource after TX complete 754 */ 755 756static void uli526x_free_tx_pkt(struct net_device *dev, 757 struct uli526x_board_info * db) 758{ 759 struct tx_desc *txptr; 760 u32 tdes0; 761 762 txptr = db->tx_remove_ptr; 763 while(db->tx_packet_cnt) { 764 tdes0 = le32_to_cpu(txptr->tdes0); 765 if (tdes0 & 0x80000000) 766 break; 767 768 /* A packet sent completed */ 769 db->tx_packet_cnt--; 770 dev->stats.tx_packets++; 771 772 /* Transmit statistic counter */ 773 if ( tdes0 != 0x7fffffff ) { 774 dev->stats.collisions += (tdes0 >> 3) & 0xf; 775 dev->stats.tx_bytes += le32_to_cpu(txptr->tdes1) & 0x7ff; 776 if (tdes0 & TDES0_ERR_MASK) { 777 dev->stats.tx_errors++; 778 if (tdes0 & 0x0002) { /* UnderRun */ 779 db->tx_fifo_underrun++; 780 if ( !(db->cr6_data & CR6_SFT) ) { 781 db->cr6_data = db->cr6_data | CR6_SFT; 782 update_cr6(db->cr6_data, db->ioaddr); 783 } 784 } 785 if (tdes0 & 0x0100) 786 db->tx_excessive_collision++; 787 if (tdes0 & 0x0200) 788 db->tx_late_collision++; 789 if (tdes0 & 0x0400) 790 db->tx_no_carrier++; 791 if (tdes0 & 0x0800) 792 db->tx_loss_carrier++; 793 if (tdes0 & 0x4000) 794 db->tx_jabber_timeout++; 795 } 796 } 797 798 txptr = txptr->next_tx_desc; 799 }/* End of while */ 800 801 /* Update TX remove pointer to next */ 802 db->tx_remove_ptr = txptr; 803 804 /* Resource available check */ 805 if ( db->tx_packet_cnt < TX_WAKE_DESC_CNT ) 806 netif_wake_queue(dev); /* Active upper layer, send again */ 807} 808 809 810/* 811 * Receive the come packet and pass to upper layer 812 */ 813 814static void uli526x_rx_packet(struct net_device *dev, struct uli526x_board_info * db) 815{ 816 struct rx_desc *rxptr; 817 struct sk_buff *skb; 818 int rxlen; 819 u32 rdes0; 820 821 rxptr = db->rx_ready_ptr; 822 823 while(db->rx_avail_cnt) { 824 rdes0 = le32_to_cpu(rxptr->rdes0); 825 if (rdes0 & 0x80000000) /* packet owner check */ 826 { 827 break; 828 } 829 830 db->rx_avail_cnt--; 831 db->interval_rx_cnt++; 832 833 pci_unmap_single(db->pdev, le32_to_cpu(rxptr->rdes2), RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE); 834 if ( (rdes0 & 0x300) != 0x300) { 835 /* A packet without First/Last flag */ 836 /* reuse this SKB */ 837 ULI526X_DBUG(0, "Reuse SK buffer, rdes0", rdes0); 838 uli526x_reuse_skb(db, rxptr->rx_skb_ptr); 839 } else { 840 /* A packet with First/Last flag */ 841 rxlen = ( (rdes0 >> 16) & 0x3fff) - 4; 842 843 /* error summary bit check */ 844 if (rdes0 & 0x8000) { 845 /* This is a error packet */ 846 dev->stats.rx_errors++; 847 if (rdes0 & 1) 848 dev->stats.rx_fifo_errors++; 849 if (rdes0 & 2) 850 dev->stats.rx_crc_errors++; 851 if (rdes0 & 0x80) 852 dev->stats.rx_length_errors++; 853 } 854 855 if ( !(rdes0 & 0x8000) || 856 ((db->cr6_data & CR6_PM) && (rxlen>6)) ) { 857 struct sk_buff *new_skb = NULL; 858 859 skb = rxptr->rx_skb_ptr; 860 861 /* Good packet, send to upper layer */ 862 /* Shorst packet used new SKB */ 863 if ((rxlen < RX_COPY_SIZE) && 864 (((new_skb = netdev_alloc_skb(dev, rxlen + 2)) != NULL))) { 865 skb = new_skb; 866 /* size less than COPY_SIZE, allocate a rxlen SKB */ 867 skb_reserve(skb, 2); /* 16byte align */ 868 memcpy(skb_put(skb, rxlen), 869 skb_tail_pointer(rxptr->rx_skb_ptr), 870 rxlen); 871 uli526x_reuse_skb(db, rxptr->rx_skb_ptr); 872 } else 873 skb_put(skb, rxlen); 874 875 skb->protocol = eth_type_trans(skb, dev); 876 netif_rx(skb); 877 dev->stats.rx_packets++; 878 dev->stats.rx_bytes += rxlen; 879 880 } else { 881 /* Reuse SKB buffer when the packet is error */ 882 ULI526X_DBUG(0, "Reuse SK buffer, rdes0", rdes0); 883 uli526x_reuse_skb(db, rxptr->rx_skb_ptr); 884 } 885 } 886 887 rxptr = rxptr->next_rx_desc; 888 } 889 890 db->rx_ready_ptr = rxptr; 891} 892 893 894/* 895 * Set ULI526X multicast address 896 */ 897 898static void uli526x_set_filter_mode(struct net_device * dev) 899{ 900 struct uli526x_board_info *db = netdev_priv(dev); 901 unsigned long flags; 902 903 ULI526X_DBUG(0, "uli526x_set_filter_mode()", 0); 904 spin_lock_irqsave(&db->lock, flags); 905 906 if (dev->flags & IFF_PROMISC) { 907 ULI526X_DBUG(0, "Enable PROM Mode", 0); 908 db->cr6_data |= CR6_PM | CR6_PBF; 909 update_cr6(db->cr6_data, db->ioaddr); 910 spin_unlock_irqrestore(&db->lock, flags); 911 return; 912 } 913 914 if (dev->flags & IFF_ALLMULTI || 915 netdev_mc_count(dev) > ULI5261_MAX_MULTICAST) { 916 ULI526X_DBUG(0, "Pass all multicast address", 917 netdev_mc_count(dev)); 918 db->cr6_data &= ~(CR6_PM | CR6_PBF); 919 db->cr6_data |= CR6_PAM; 920 spin_unlock_irqrestore(&db->lock, flags); 921 return; 922 } 923 924 ULI526X_DBUG(0, "Set multicast address", netdev_mc_count(dev)); 925 send_filter_frame(dev, netdev_mc_count(dev)); /* M5261/M5263 */ 926 spin_unlock_irqrestore(&db->lock, flags); 927} 928 929static void 930ULi_ethtool_gset(struct uli526x_board_info *db, struct ethtool_cmd *ecmd) 931{ 932 ecmd->supported = (SUPPORTED_10baseT_Half | 933 SUPPORTED_10baseT_Full | 934 SUPPORTED_100baseT_Half | 935 SUPPORTED_100baseT_Full | 936 SUPPORTED_Autoneg | 937 SUPPORTED_MII); 938 939 ecmd->advertising = (ADVERTISED_10baseT_Half | 940 ADVERTISED_10baseT_Full | 941 ADVERTISED_100baseT_Half | 942 ADVERTISED_100baseT_Full | 943 ADVERTISED_Autoneg | 944 ADVERTISED_MII); 945 946 947 ecmd->port = PORT_MII; 948 ecmd->phy_address = db->phy_addr; 949 950 ecmd->transceiver = XCVR_EXTERNAL; 951 952 ethtool_cmd_speed_set(ecmd, SPEED_10); 953 ecmd->duplex = DUPLEX_HALF; 954 955 if(db->op_mode==ULI526X_100MHF || db->op_mode==ULI526X_100MFD) 956 { 957 ethtool_cmd_speed_set(ecmd, SPEED_100); 958 } 959 if(db->op_mode==ULI526X_10MFD || db->op_mode==ULI526X_100MFD) 960 { 961 ecmd->duplex = DUPLEX_FULL; 962 } 963 if(db->link_failed) 964 { 965 ethtool_cmd_speed_set(ecmd, SPEED_UNKNOWN); 966 ecmd->duplex = DUPLEX_UNKNOWN; 967 } 968 969 if (db->media_mode & ULI526X_AUTO) 970 { 971 ecmd->autoneg = AUTONEG_ENABLE; 972 } 973} 974 975static void netdev_get_drvinfo(struct net_device *dev, 976 struct ethtool_drvinfo *info) 977{ 978 struct uli526x_board_info *np = netdev_priv(dev); 979 980 strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); 981 strlcpy(info->version, DRV_VERSION, sizeof(info->version)); 982 strlcpy(info->bus_info, pci_name(np->pdev), sizeof(info->bus_info)); 983} 984 985static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) { 986 struct uli526x_board_info *np = netdev_priv(dev); 987 988 ULi_ethtool_gset(np, cmd); 989 990 return 0; 991} 992 993static u32 netdev_get_link(struct net_device *dev) { 994 struct uli526x_board_info *np = netdev_priv(dev); 995 996 if(np->link_failed) 997 return 0; 998 else 999 return 1; 1000} 1001 1002static void uli526x_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) 1003{ 1004 wol->supported = WAKE_PHY | WAKE_MAGIC; 1005 wol->wolopts = 0; 1006} 1007 1008static const struct ethtool_ops netdev_ethtool_ops = { 1009 .get_drvinfo = netdev_get_drvinfo, 1010 .get_settings = netdev_get_settings, 1011 .get_link = netdev_get_link, 1012 .get_wol = uli526x_get_wol, 1013}; 1014 1015/* 1016 * A periodic timer routine 1017 * Dynamic media sense, allocate Rx buffer... 1018 */ 1019 1020static void uli526x_timer(unsigned long data) 1021{ 1022 struct net_device *dev = (struct net_device *) data; 1023 struct uli526x_board_info *db = netdev_priv(dev); 1024 struct uli_phy_ops *phy = &db->phy; 1025 void __iomem *ioaddr = db->ioaddr; 1026 unsigned long flags; 1027 u8 tmp_cr12 = 0; 1028 u32 tmp_cr8; 1029 1030 //ULI526X_DBUG(0, "uli526x_timer()", 0); 1031 spin_lock_irqsave(&db->lock, flags); 1032 1033 1034 /* Dynamic reset ULI526X : system error or transmit time-out */ 1035 tmp_cr8 = ur32(DCR8); 1036 if ( (db->interval_rx_cnt==0) && (tmp_cr8) ) { 1037 db->reset_cr8++; 1038 db->wait_reset = 1; 1039 } 1040 db->interval_rx_cnt = 0; 1041 1042 /* TX polling kick monitor */ 1043 if ( db->tx_packet_cnt && 1044 time_after(jiffies, dev_trans_start(dev) + ULI526X_TX_KICK) ) { 1045 uw32(DCR1, 0x1); // Tx polling again 1046 1047 // TX Timeout 1048 if ( time_after(jiffies, dev_trans_start(dev) + ULI526X_TX_TIMEOUT) ) { 1049 db->reset_TXtimeout++; 1050 db->wait_reset = 1; 1051 netdev_err(dev, " Tx timeout - resetting\n"); 1052 } 1053 } 1054 1055 if (db->wait_reset) { 1056 ULI526X_DBUG(0, "Dynamic Reset device", db->tx_packet_cnt); 1057 db->reset_count++; 1058 uli526x_dynamic_reset(dev); 1059 db->timer.expires = ULI526X_TIMER_WUT; 1060 add_timer(&db->timer); 1061 spin_unlock_irqrestore(&db->lock, flags); 1062 return; 1063 } 1064 1065 /* Link status check, Dynamic media type change */ 1066 if ((phy->read(db, db->phy_addr, 5) & 0x01e0)!=0) 1067 tmp_cr12 = 3; 1068 1069 if ( !(tmp_cr12 & 0x3) && !db->link_failed ) { 1070 /* Link Failed */ 1071 ULI526X_DBUG(0, "Link Failed", tmp_cr12); 1072 netif_carrier_off(dev); 1073 netdev_info(dev, "NIC Link is Down\n"); 1074 db->link_failed = 1; 1075 1076 /* For Force 10/100M Half/Full mode: Enable Auto-Nego mode */ 1077 /* AUTO don't need */ 1078 if ( !(db->media_mode & 0x8) ) 1079 phy->write(db, db->phy_addr, 0, 0x1000); 1080 1081 /* AUTO mode, if INT phyxcer link failed, select EXT device */ 1082 if (db->media_mode & ULI526X_AUTO) { 1083 db->cr6_data&=~0x00000200; /* bit9=0, HD mode */ 1084 update_cr6(db->cr6_data, db->ioaddr); 1085 } 1086 } else 1087 if ((tmp_cr12 & 0x3) && db->link_failed) { 1088 ULI526X_DBUG(0, "Link link OK", tmp_cr12); 1089 db->link_failed = 0; 1090 1091 /* Auto Sense Speed */ 1092 if ( (db->media_mode & ULI526X_AUTO) && 1093 uli526x_sense_speed(db) ) 1094 db->link_failed = 1; 1095 uli526x_process_mode(db); 1096 1097 if(db->link_failed==0) 1098 { 1099 netdev_info(dev, "NIC Link is Up %d Mbps %s duplex\n", 1100 (db->op_mode == ULI526X_100MHF || 1101 db->op_mode == ULI526X_100MFD) 1102 ? 100 : 10, 1103 (db->op_mode == ULI526X_10MFD || 1104 db->op_mode == ULI526X_100MFD) 1105 ? "Full" : "Half"); 1106 netif_carrier_on(dev); 1107 } 1108 /* SHOW_MEDIA_TYPE(db->op_mode); */ 1109 } 1110 else if(!(tmp_cr12 & 0x3) && db->link_failed) 1111 { 1112 if(db->init==1) 1113 { 1114 netdev_info(dev, "NIC Link is Down\n"); 1115 netif_carrier_off(dev); 1116 } 1117 } 1118 db->init=0; 1119 1120 /* Timer active again */ 1121 db->timer.expires = ULI526X_TIMER_WUT; 1122 add_timer(&db->timer); 1123 spin_unlock_irqrestore(&db->lock, flags); 1124} 1125 1126 1127/* 1128 * Stop ULI526X board 1129 * Free Tx/Rx allocated memory 1130 * Init system variable 1131 */ 1132 1133static void uli526x_reset_prepare(struct net_device *dev) 1134{ 1135 struct uli526x_board_info *db = netdev_priv(dev); 1136 void __iomem *ioaddr = db->ioaddr; 1137 1138 /* Sopt MAC controller */ 1139 db->cr6_data &= ~(CR6_RXSC | CR6_TXSC); /* Disable Tx/Rx */ 1140 update_cr6(db->cr6_data, ioaddr); 1141 uw32(DCR7, 0); /* Disable Interrupt */ 1142 uw32(DCR5, ur32(DCR5)); 1143 1144 /* Disable upper layer interface */ 1145 netif_stop_queue(dev); 1146 1147 /* Free Rx Allocate buffer */ 1148 uli526x_free_rxbuffer(db); 1149 1150 /* system variable init */ 1151 db->tx_packet_cnt = 0; 1152 db->rx_avail_cnt = 0; 1153 db->link_failed = 1; 1154 db->init=1; 1155 db->wait_reset = 0; 1156} 1157 1158 1159/* 1160 * Dynamic reset the ULI526X board 1161 * Stop ULI526X board 1162 * Free Tx/Rx allocated memory 1163 * Reset ULI526X board 1164 * Re-initialize ULI526X board 1165 */ 1166 1167static void uli526x_dynamic_reset(struct net_device *dev) 1168{ 1169 ULI526X_DBUG(0, "uli526x_dynamic_reset()", 0); 1170 1171 uli526x_reset_prepare(dev); 1172 1173 /* Re-initialize ULI526X board */ 1174 uli526x_init(dev); 1175 1176 /* Restart upper layer interface */ 1177 netif_wake_queue(dev); 1178} 1179 1180 1181#ifdef CONFIG_PM 1182 1183/* 1184 * Suspend the interface. 1185 */ 1186 1187static int uli526x_suspend(struct pci_dev *pdev, pm_message_t state) 1188{ 1189 struct net_device *dev = pci_get_drvdata(pdev); 1190 pci_power_t power_state; 1191 int err; 1192 1193 ULI526X_DBUG(0, "uli526x_suspend", 0); 1194 1195 pci_save_state(pdev); 1196 1197 if (!netif_running(dev)) 1198 return 0; 1199 1200 netif_device_detach(dev); 1201 uli526x_reset_prepare(dev); 1202 1203 power_state = pci_choose_state(pdev, state); 1204 pci_enable_wake(pdev, power_state, 0); 1205 err = pci_set_power_state(pdev, power_state); 1206 if (err) { 1207 netif_device_attach(dev); 1208 /* Re-initialize ULI526X board */ 1209 uli526x_init(dev); 1210 /* Restart upper layer interface */ 1211 netif_wake_queue(dev); 1212 } 1213 1214 return err; 1215} 1216 1217/* 1218 * Resume the interface. 1219 */ 1220 1221static int uli526x_resume(struct pci_dev *pdev) 1222{ 1223 struct net_device *dev = pci_get_drvdata(pdev); 1224 int err; 1225 1226 ULI526X_DBUG(0, "uli526x_resume", 0); 1227 1228 pci_restore_state(pdev); 1229 1230 if (!netif_running(dev)) 1231 return 0; 1232 1233 err = pci_set_power_state(pdev, PCI_D0); 1234 if (err) { 1235 netdev_warn(dev, "Could not put device into D0\n"); 1236 return err; 1237 } 1238 1239 netif_device_attach(dev); 1240 /* Re-initialize ULI526X board */ 1241 uli526x_init(dev); 1242 /* Restart upper layer interface */ 1243 netif_wake_queue(dev); 1244 1245 return 0; 1246} 1247 1248#else /* !CONFIG_PM */ 1249 1250#define uli526x_suspend NULL 1251#define uli526x_resume NULL 1252 1253#endif /* !CONFIG_PM */ 1254 1255 1256/* 1257 * free all allocated rx buffer 1258 */ 1259 1260static void uli526x_free_rxbuffer(struct uli526x_board_info * db) 1261{ 1262 ULI526X_DBUG(0, "uli526x_free_rxbuffer()", 0); 1263 1264 /* free allocated rx buffer */ 1265 while (db->rx_avail_cnt) { 1266 dev_kfree_skb(db->rx_ready_ptr->rx_skb_ptr); 1267 db->rx_ready_ptr = db->rx_ready_ptr->next_rx_desc; 1268 db->rx_avail_cnt--; 1269 } 1270} 1271 1272 1273/* 1274 * Reuse the SK buffer 1275 */ 1276 1277static void uli526x_reuse_skb(struct uli526x_board_info *db, struct sk_buff * skb) 1278{ 1279 struct rx_desc *rxptr = db->rx_insert_ptr; 1280 1281 if (!(rxptr->rdes0 & cpu_to_le32(0x80000000))) { 1282 rxptr->rx_skb_ptr = skb; 1283 rxptr->rdes2 = cpu_to_le32(pci_map_single(db->pdev, 1284 skb_tail_pointer(skb), 1285 RX_ALLOC_SIZE, 1286 PCI_DMA_FROMDEVICE)); 1287 wmb(); 1288 rxptr->rdes0 = cpu_to_le32(0x80000000); 1289 db->rx_avail_cnt++; 1290 db->rx_insert_ptr = rxptr->next_rx_desc; 1291 } else 1292 ULI526X_DBUG(0, "SK Buffer reuse method error", db->rx_avail_cnt); 1293} 1294 1295 1296/* 1297 * Initialize transmit/Receive descriptor 1298 * Using Chain structure, and allocate Tx/Rx buffer 1299 */ 1300 1301static void uli526x_descriptor_init(struct net_device *dev, void __iomem *ioaddr) 1302{ 1303 struct uli526x_board_info *db = netdev_priv(dev); 1304 struct tx_desc *tmp_tx; 1305 struct rx_desc *tmp_rx; 1306 unsigned char *tmp_buf; 1307 dma_addr_t tmp_tx_dma, tmp_rx_dma; 1308 dma_addr_t tmp_buf_dma; 1309 int i; 1310 1311 ULI526X_DBUG(0, "uli526x_descriptor_init()", 0); 1312 1313 /* tx descriptor start pointer */ 1314 db->tx_insert_ptr = db->first_tx_desc; 1315 db->tx_remove_ptr = db->first_tx_desc; 1316 uw32(DCR4, db->first_tx_desc_dma); /* TX DESC address */ 1317 1318 /* rx descriptor start pointer */ 1319 db->first_rx_desc = (void *)db->first_tx_desc + sizeof(struct tx_desc) * TX_DESC_CNT; 1320 db->first_rx_desc_dma = db->first_tx_desc_dma + sizeof(struct tx_desc) * TX_DESC_CNT; 1321 db->rx_insert_ptr = db->first_rx_desc; 1322 db->rx_ready_ptr = db->first_rx_desc; 1323 uw32(DCR3, db->first_rx_desc_dma); /* RX DESC address */ 1324 1325 /* Init Transmit chain */ 1326 tmp_buf = db->buf_pool_start; 1327 tmp_buf_dma = db->buf_pool_dma_start; 1328 tmp_tx_dma = db->first_tx_desc_dma; 1329 for (tmp_tx = db->first_tx_desc, i = 0; i < TX_DESC_CNT; i++, tmp_tx++) { 1330 tmp_tx->tx_buf_ptr = tmp_buf; 1331 tmp_tx->tdes0 = cpu_to_le32(0); 1332 tmp_tx->tdes1 = cpu_to_le32(0x81000000); /* IC, chain */ 1333 tmp_tx->tdes2 = cpu_to_le32(tmp_buf_dma); 1334 tmp_tx_dma += sizeof(struct tx_desc); 1335 tmp_tx->tdes3 = cpu_to_le32(tmp_tx_dma); 1336 tmp_tx->next_tx_desc = tmp_tx + 1; 1337 tmp_buf = tmp_buf + TX_BUF_ALLOC; 1338 tmp_buf_dma = tmp_buf_dma + TX_BUF_ALLOC; 1339 } 1340 (--tmp_tx)->tdes3 = cpu_to_le32(db->first_tx_desc_dma); 1341 tmp_tx->next_tx_desc = db->first_tx_desc; 1342 1343 /* Init Receive descriptor chain */ 1344 tmp_rx_dma=db->first_rx_desc_dma; 1345 for (tmp_rx = db->first_rx_desc, i = 0; i < RX_DESC_CNT; i++, tmp_rx++) { 1346 tmp_rx->rdes0 = cpu_to_le32(0); 1347 tmp_rx->rdes1 = cpu_to_le32(0x01000600); 1348 tmp_rx_dma += sizeof(struct rx_desc); 1349 tmp_rx->rdes3 = cpu_to_le32(tmp_rx_dma); 1350 tmp_rx->next_rx_desc = tmp_rx + 1; 1351 } 1352 (--tmp_rx)->rdes3 = cpu_to_le32(db->first_rx_desc_dma); 1353 tmp_rx->next_rx_desc = db->first_rx_desc; 1354 1355 /* pre-allocate Rx buffer */ 1356 allocate_rx_buffer(dev); 1357} 1358 1359 1360/* 1361 * Update CR6 value 1362 * Firstly stop ULI526X, then written value and start 1363 */ 1364static void update_cr6(u32 cr6_data, void __iomem *ioaddr) 1365{ 1366 uw32(DCR6, cr6_data); 1367 udelay(5); 1368} 1369 1370 1371/* 1372 * Send a setup frame for M5261/M5263 1373 * This setup frame initialize ULI526X address filter mode 1374 */ 1375 1376#ifdef __BIG_ENDIAN 1377#define FLT_SHIFT 16 1378#else 1379#define FLT_SHIFT 0 1380#endif 1381 1382static void send_filter_frame(struct net_device *dev, int mc_cnt) 1383{ 1384 struct uli526x_board_info *db = netdev_priv(dev); 1385 void __iomem *ioaddr = db->ioaddr; 1386 struct netdev_hw_addr *ha; 1387 struct tx_desc *txptr; 1388 u16 * addrptr; 1389 u32 * suptr; 1390 int i; 1391 1392 ULI526X_DBUG(0, "send_filter_frame()", 0); 1393 1394 txptr = db->tx_insert_ptr; 1395 suptr = (u32 *) txptr->tx_buf_ptr; 1396 1397 /* Node address */ 1398 addrptr = (u16 *) dev->dev_addr; 1399 *suptr++ = addrptr[0] << FLT_SHIFT; 1400 *suptr++ = addrptr[1] << FLT_SHIFT; 1401 *suptr++ = addrptr[2] << FLT_SHIFT; 1402 1403 /* broadcast address */ 1404 *suptr++ = 0xffff << FLT_SHIFT; 1405 *suptr++ = 0xffff << FLT_SHIFT; 1406 *suptr++ = 0xffff << FLT_SHIFT; 1407 1408 /* fit the multicast address */ 1409 netdev_for_each_mc_addr(ha, dev) { 1410 addrptr = (u16 *) ha->addr; 1411 *suptr++ = addrptr[0] << FLT_SHIFT; 1412 *suptr++ = addrptr[1] << FLT_SHIFT; 1413 *suptr++ = addrptr[2] << FLT_SHIFT; 1414 } 1415 1416 for (i = netdev_mc_count(dev); i < 14; i++) { 1417 *suptr++ = 0xffff << FLT_SHIFT; 1418 *suptr++ = 0xffff << FLT_SHIFT; 1419 *suptr++ = 0xffff << FLT_SHIFT; 1420 } 1421 1422 /* prepare the setup frame */ 1423 db->tx_insert_ptr = txptr->next_tx_desc; 1424 txptr->tdes1 = cpu_to_le32(0x890000c0); 1425 1426 /* Resource Check and Send the setup packet */ 1427 if (db->tx_packet_cnt < TX_DESC_CNT) { 1428 /* Resource Empty */ 1429 db->tx_packet_cnt++; 1430 txptr->tdes0 = cpu_to_le32(0x80000000); 1431 update_cr6(db->cr6_data | 0x2000, ioaddr); 1432 uw32(DCR1, 0x1); /* Issue Tx polling */ 1433 update_cr6(db->cr6_data, ioaddr); 1434 dev->trans_start = jiffies; 1435 } else 1436 netdev_err(dev, "No Tx resource - Send_filter_frame!\n"); 1437} 1438 1439 1440/* 1441 * Allocate rx buffer, 1442 * As possible as allocate maxiumn Rx buffer 1443 */ 1444 1445static void allocate_rx_buffer(struct net_device *dev) 1446{ 1447 struct uli526x_board_info *db = netdev_priv(dev); 1448 struct rx_desc *rxptr; 1449 struct sk_buff *skb; 1450 1451 rxptr = db->rx_insert_ptr; 1452 1453 while(db->rx_avail_cnt < RX_DESC_CNT) { 1454 skb = netdev_alloc_skb(dev, RX_ALLOC_SIZE); 1455 if (skb == NULL) 1456 break; 1457 rxptr->rx_skb_ptr = skb; /* FIXME (?) */ 1458 rxptr->rdes2 = cpu_to_le32(pci_map_single(db->pdev, 1459 skb_tail_pointer(skb), 1460 RX_ALLOC_SIZE, 1461 PCI_DMA_FROMDEVICE)); 1462 wmb(); 1463 rxptr->rdes0 = cpu_to_le32(0x80000000); 1464 rxptr = rxptr->next_rx_desc; 1465 db->rx_avail_cnt++; 1466 } 1467 1468 db->rx_insert_ptr = rxptr; 1469} 1470 1471 1472/* 1473 * Read one word data from the serial ROM 1474 */ 1475 1476static u16 read_srom_word(struct uli526x_board_info *db, int offset) 1477{ 1478 void __iomem *ioaddr = db->ioaddr; 1479 u16 srom_data = 0; 1480 int i; 1481 1482 uw32(DCR9, CR9_SROM_READ); 1483 uw32(DCR9, CR9_SROM_READ | CR9_SRCS); 1484 1485 /* Send the Read Command 110b */ 1486 srom_clk_write(db, SROM_DATA_1); 1487 srom_clk_write(db, SROM_DATA_1); 1488 srom_clk_write(db, SROM_DATA_0); 1489 1490 /* Send the offset */ 1491 for (i = 5; i >= 0; i--) { 1492 srom_data = (offset & (1 << i)) ? SROM_DATA_1 : SROM_DATA_0; 1493 srom_clk_write(db, srom_data); 1494 } 1495 1496 uw32(DCR9, CR9_SROM_READ | CR9_SRCS); 1497 1498 for (i = 16; i > 0; i--) { 1499 uw32(DCR9, CR9_SROM_READ | CR9_SRCS | CR9_SRCLK); 1500 udelay(5); 1501 srom_data = (srom_data << 1) | 1502 ((ur32(DCR9) & CR9_CRDOUT) ? 1 : 0); 1503 uw32(DCR9, CR9_SROM_READ | CR9_SRCS); 1504 udelay(5); 1505 } 1506 1507 uw32(DCR9, CR9_SROM_READ); 1508 return srom_data; 1509} 1510 1511 1512/* 1513 * Auto sense the media mode 1514 */ 1515 1516static u8 uli526x_sense_speed(struct uli526x_board_info * db) 1517{ 1518 struct uli_phy_ops *phy = &db->phy; 1519 u8 ErrFlag = 0; 1520 u16 phy_mode; 1521 1522 phy_mode = phy->read(db, db->phy_addr, 1); 1523 phy_mode = phy->read(db, db->phy_addr, 1); 1524 1525 if ( (phy_mode & 0x24) == 0x24 ) { 1526 1527 phy_mode = ((phy->read(db, db->phy_addr, 5) & 0x01e0)<<7); 1528 if(phy_mode&0x8000) 1529 phy_mode = 0x8000; 1530 else if(phy_mode&0x4000) 1531 phy_mode = 0x4000; 1532 else if(phy_mode&0x2000) 1533 phy_mode = 0x2000; 1534 else 1535 phy_mode = 0x1000; 1536 1537 switch (phy_mode) { 1538 case 0x1000: db->op_mode = ULI526X_10MHF; break; 1539 case 0x2000: db->op_mode = ULI526X_10MFD; break; 1540 case 0x4000: db->op_mode = ULI526X_100MHF; break; 1541 case 0x8000: db->op_mode = ULI526X_100MFD; break; 1542 default: db->op_mode = ULI526X_10MHF; ErrFlag = 1; break; 1543 } 1544 } else { 1545 db->op_mode = ULI526X_10MHF; 1546 ULI526X_DBUG(0, "Link Failed :", phy_mode); 1547 ErrFlag = 1; 1548 } 1549 1550 return ErrFlag; 1551} 1552 1553 1554/* 1555 * Set 10/100 phyxcer capability 1556 * AUTO mode : phyxcer register4 is NIC capability 1557 * Force mode: phyxcer register4 is the force media 1558 */ 1559 1560static void uli526x_set_phyxcer(struct uli526x_board_info *db) 1561{ 1562 struct uli_phy_ops *phy = &db->phy; 1563 u16 phy_reg; 1564 1565 /* Phyxcer capability setting */ 1566 phy_reg = phy->read(db, db->phy_addr, 4) & ~0x01e0; 1567 1568 if (db->media_mode & ULI526X_AUTO) { 1569 /* AUTO Mode */ 1570 phy_reg |= db->PHY_reg4; 1571 } else { 1572 /* Force Mode */ 1573 switch(db->media_mode) { 1574 case ULI526X_10MHF: phy_reg |= 0x20; break; 1575 case ULI526X_10MFD: phy_reg |= 0x40; break; 1576 case ULI526X_100MHF: phy_reg |= 0x80; break; 1577 case ULI526X_100MFD: phy_reg |= 0x100; break; 1578 } 1579 1580 } 1581 1582 /* Write new capability to Phyxcer Reg4 */ 1583 if ( !(phy_reg & 0x01e0)) { 1584 phy_reg|=db->PHY_reg4; 1585 db->media_mode|=ULI526X_AUTO; 1586 } 1587 phy->write(db, db->phy_addr, 4, phy_reg); 1588 1589 /* Restart Auto-Negotiation */ 1590 phy->write(db, db->phy_addr, 0, 0x1200); 1591 udelay(50); 1592} 1593 1594 1595/* 1596 * Process op-mode 1597 AUTO mode : PHY controller in Auto-negotiation Mode 1598 * Force mode: PHY controller in force mode with HUB 1599 * N-way force capability with SWITCH 1600 */ 1601 1602static void uli526x_process_mode(struct uli526x_board_info *db) 1603{ 1604 struct uli_phy_ops *phy = &db->phy; 1605 u16 phy_reg; 1606 1607 /* Full Duplex Mode Check */ 1608 if (db->op_mode & 0x4) 1609 db->cr6_data |= CR6_FDM; /* Set Full Duplex Bit */ 1610 else 1611 db->cr6_data &= ~CR6_FDM; /* Clear Full Duplex Bit */ 1612 1613 update_cr6(db->cr6_data, db->ioaddr); 1614 1615 /* 10/100M phyxcer force mode need */ 1616 if (!(db->media_mode & 0x8)) { 1617 /* Forece Mode */ 1618 phy_reg = phy->read(db, db->phy_addr, 6); 1619 if (!(phy_reg & 0x1)) { 1620 /* parter without N-Way capability */ 1621 phy_reg = 0x0; 1622 switch(db->op_mode) { 1623 case ULI526X_10MHF: phy_reg = 0x0; break; 1624 case ULI526X_10MFD: phy_reg = 0x100; break; 1625 case ULI526X_100MHF: phy_reg = 0x2000; break; 1626 case ULI526X_100MFD: phy_reg = 0x2100; break; 1627 } 1628 phy->write(db, db->phy_addr, 0, phy_reg); 1629 } 1630 } 1631} 1632 1633 1634/* M5261/M5263 Chip */ 1635static void phy_writeby_cr9(struct uli526x_board_info *db, u8 phy_addr, 1636 u8 offset, u16 phy_data) 1637{ 1638 u16 i; 1639 1640 /* Send 33 synchronization clock to Phy controller */ 1641 for (i = 0; i < 35; i++) 1642 phy_write_1bit(db, PHY_DATA_1); 1643 1644 /* Send start command(01) to Phy */ 1645 phy_write_1bit(db, PHY_DATA_0); 1646 phy_write_1bit(db, PHY_DATA_1); 1647 1648 /* Send write command(01) to Phy */ 1649 phy_write_1bit(db, PHY_DATA_0); 1650 phy_write_1bit(db, PHY_DATA_1); 1651 1652 /* Send Phy address */ 1653 for (i = 0x10; i > 0; i = i >> 1) 1654 phy_write_1bit(db, phy_addr & i ? PHY_DATA_1 : PHY_DATA_0); 1655 1656 /* Send register address */ 1657 for (i = 0x10; i > 0; i = i >> 1) 1658 phy_write_1bit(db, offset & i ? PHY_DATA_1 : PHY_DATA_0); 1659 1660 /* written trasnition */ 1661 phy_write_1bit(db, PHY_DATA_1); 1662 phy_write_1bit(db, PHY_DATA_0); 1663 1664 /* Write a word data to PHY controller */ 1665 for (i = 0x8000; i > 0; i >>= 1) 1666 phy_write_1bit(db, phy_data & i ? PHY_DATA_1 : PHY_DATA_0); 1667} 1668 1669static u16 phy_readby_cr9(struct uli526x_board_info *db, u8 phy_addr, u8 offset) 1670{ 1671 u16 phy_data; 1672 int i; 1673 1674 /* Send 33 synchronization clock to Phy controller */ 1675 for (i = 0; i < 35; i++) 1676 phy_write_1bit(db, PHY_DATA_1); 1677 1678 /* Send start command(01) to Phy */ 1679 phy_write_1bit(db, PHY_DATA_0); 1680 phy_write_1bit(db, PHY_DATA_1); 1681 1682 /* Send read command(10) to Phy */ 1683 phy_write_1bit(db, PHY_DATA_1); 1684 phy_write_1bit(db, PHY_DATA_0); 1685 1686 /* Send Phy address */ 1687 for (i = 0x10; i > 0; i = i >> 1) 1688 phy_write_1bit(db, phy_addr & i ? PHY_DATA_1 : PHY_DATA_0); 1689 1690 /* Send register address */ 1691 for (i = 0x10; i > 0; i = i >> 1) 1692 phy_write_1bit(db, offset & i ? PHY_DATA_1 : PHY_DATA_0); 1693 1694 /* Skip transition state */ 1695 phy_read_1bit(db); 1696 1697 /* read 16bit data */ 1698 for (phy_data = 0, i = 0; i < 16; i++) { 1699 phy_data <<= 1; 1700 phy_data |= phy_read_1bit(db); 1701 } 1702 1703 return phy_data; 1704} 1705 1706static u16 phy_readby_cr10(struct uli526x_board_info *db, u8 phy_addr, 1707 u8 offset) 1708{ 1709 void __iomem *ioaddr = db->ioaddr; 1710 u32 cr10_value = phy_addr; 1711 1712 cr10_value = (cr10_value << 5) + offset; 1713 cr10_value = (cr10_value << 16) + 0x08000000; 1714 uw32(DCR10, cr10_value); 1715 udelay(1); 1716 while (1) { 1717 cr10_value = ur32(DCR10); 1718 if (cr10_value & 0x10000000) 1719 break; 1720 } 1721 return cr10_value & 0x0ffff; 1722} 1723 1724static void phy_writeby_cr10(struct uli526x_board_info *db, u8 phy_addr, 1725 u8 offset, u16 phy_data) 1726{ 1727 void __iomem *ioaddr = db->ioaddr; 1728 u32 cr10_value = phy_addr; 1729 1730 cr10_value = (cr10_value << 5) + offset; 1731 cr10_value = (cr10_value << 16) + 0x04000000 + phy_data; 1732 uw32(DCR10, cr10_value); 1733 udelay(1); 1734} 1735/* 1736 * Write one bit data to Phy Controller 1737 */ 1738 1739static void phy_write_1bit(struct uli526x_board_info *db, u32 data) 1740{ 1741 void __iomem *ioaddr = db->ioaddr; 1742 1743 uw32(DCR9, data); /* MII Clock Low */ 1744 udelay(1); 1745 uw32(DCR9, data | MDCLKH); /* MII Clock High */ 1746 udelay(1); 1747 uw32(DCR9, data); /* MII Clock Low */ 1748 udelay(1); 1749} 1750 1751 1752/* 1753 * Read one bit phy data from PHY controller 1754 */ 1755 1756static u16 phy_read_1bit(struct uli526x_board_info *db) 1757{ 1758 void __iomem *ioaddr = db->ioaddr; 1759 u16 phy_data; 1760 1761 uw32(DCR9, 0x50000); 1762 udelay(1); 1763 phy_data = (ur32(DCR9) >> 19) & 0x1; 1764 uw32(DCR9, 0x40000); 1765 udelay(1); 1766 1767 return phy_data; 1768} 1769 1770 1771static const struct pci_device_id uli526x_pci_tbl[] = { 1772 { 0x10B9, 0x5261, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ULI5261_ID }, 1773 { 0x10B9, 0x5263, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ULI5263_ID }, 1774 { 0, } 1775}; 1776MODULE_DEVICE_TABLE(pci, uli526x_pci_tbl); 1777 1778 1779static struct pci_driver uli526x_driver = { 1780 .name = "uli526x", 1781 .id_table = uli526x_pci_tbl, 1782 .probe = uli526x_init_one, 1783 .remove = uli526x_remove_one, 1784 .suspend = uli526x_suspend, 1785 .resume = uli526x_resume, 1786}; 1787 1788MODULE_AUTHOR("Peer Chen, peer.chen@uli.com.tw"); 1789MODULE_DESCRIPTION("ULi M5261/M5263 fast ethernet driver"); 1790MODULE_LICENSE("GPL"); 1791 1792module_param(debug, int, 0644); 1793module_param(mode, int, 0); 1794module_param(cr6set, int, 0); 1795MODULE_PARM_DESC(debug, "ULi M5261/M5263 enable debugging (0-1)"); 1796MODULE_PARM_DESC(mode, "ULi M5261/M5263: Bit 0: 10/100Mbps, bit 2: duplex, bit 8: HomePNA"); 1797 1798/* Description: 1799 * when user used insmod to add module, system invoked init_module() 1800 * to register the services. 1801 */ 1802 1803static int __init uli526x_init_module(void) 1804{ 1805 1806 pr_info("%s\n", version); 1807 printed_version = 1; 1808 1809 ULI526X_DBUG(0, "init_module() ", debug); 1810 1811 if (debug) 1812 uli526x_debug = debug; /* set debug flag */ 1813 if (cr6set) 1814 uli526x_cr6_user_set = cr6set; 1815 1816 switch (mode) { 1817 case ULI526X_10MHF: 1818 case ULI526X_100MHF: 1819 case ULI526X_10MFD: 1820 case ULI526X_100MFD: 1821 uli526x_media_mode = mode; 1822 break; 1823 default: 1824 uli526x_media_mode = ULI526X_AUTO; 1825 break; 1826 } 1827 1828 return pci_register_driver(&uli526x_driver); 1829} 1830 1831 1832/* 1833 * Description: 1834 * when user used rmmod to delete module, system invoked clean_module() 1835 * to un-register all registered services. 1836 */ 1837 1838static void __exit uli526x_cleanup_module(void) 1839{ 1840 ULI526X_DBUG(0, "uli526x_cleanup_module() ", debug); 1841 pci_unregister_driver(&uli526x_driver); 1842} 1843 1844module_init(uli526x_init_module); 1845module_exit(uli526x_cleanup_module); 1846