1/* bnx2x_main.c: Broadcom Everest network driver. 2 * 3 * Copyright (c) 2007-2013 Broadcom Corporation 4 * 5 * This program is free software; you can redistribute it and/or modify 6 * it under the terms of the GNU General Public License as published by 7 * the Free Software Foundation. 8 * 9 * Maintained by: Ariel Elior <ariel.elior@qlogic.com> 10 * Written by: Eliezer Tamir 11 * Based on code from Michael Chan's bnx2 driver 12 * UDP CSUM errata workaround by Arik Gendelman 13 * Slowpath and fastpath rework by Vladislav Zolotarov 14 * Statistics and Link management by Yitchak Gertner 15 * 16 */ 17 18#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 19 20#include <linux/module.h> 21#include <linux/moduleparam.h> 22#include <linux/kernel.h> 23#include <linux/device.h> /* for dev_info() */ 24#include <linux/timer.h> 25#include <linux/errno.h> 26#include <linux/ioport.h> 27#include <linux/slab.h> 28#include <linux/interrupt.h> 29#include <linux/pci.h> 30#include <linux/aer.h> 31#include <linux/init.h> 32#include <linux/netdevice.h> 33#include <linux/etherdevice.h> 34#include <linux/skbuff.h> 35#include <linux/dma-mapping.h> 36#include <linux/bitops.h> 37#include <linux/irq.h> 38#include <linux/delay.h> 39#include <asm/byteorder.h> 40#include <linux/time.h> 41#include <linux/ethtool.h> 42#include <linux/mii.h> 43#include <linux/if_vlan.h> 44#include <linux/crash_dump.h> 45#include <net/ip.h> 46#include <net/ipv6.h> 47#include <net/tcp.h> 48#include <net/vxlan.h> 49#include <net/checksum.h> 50#include <net/ip6_checksum.h> 51#include <linux/workqueue.h> 52#include <linux/crc32.h> 53#include <linux/crc32c.h> 54#include <linux/prefetch.h> 55#include <linux/zlib.h> 56#include <linux/io.h> 57#include <linux/semaphore.h> 58#include <linux/stringify.h> 59#include <linux/vmalloc.h> 60 61#include "bnx2x.h" 62#include "bnx2x_init.h" 63#include "bnx2x_init_ops.h" 64#include "bnx2x_cmn.h" 65#include "bnx2x_vfpf.h" 66#include "bnx2x_dcb.h" 67#include "bnx2x_sp.h" 68#include <linux/firmware.h> 69#include "bnx2x_fw_file_hdr.h" 70/* FW files */ 71#define FW_FILE_VERSION \ 72 __stringify(BCM_5710_FW_MAJOR_VERSION) "." \ 73 __stringify(BCM_5710_FW_MINOR_VERSION) "." \ 74 __stringify(BCM_5710_FW_REVISION_VERSION) "." \ 75 __stringify(BCM_5710_FW_ENGINEERING_VERSION) 76#define FW_FILE_NAME_E1 "bnx2x/bnx2x-e1-" FW_FILE_VERSION ".fw" 77#define FW_FILE_NAME_E1H "bnx2x/bnx2x-e1h-" FW_FILE_VERSION ".fw" 78#define FW_FILE_NAME_E2 "bnx2x/bnx2x-e2-" FW_FILE_VERSION ".fw" 79 80/* Time in jiffies before concluding the transmitter is hung */ 81#define TX_TIMEOUT (5*HZ) 82 83static char version[] = 84 "Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver " 85 DRV_MODULE_NAME " " DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n"; 86 87MODULE_AUTHOR("Eliezer Tamir"); 88MODULE_DESCRIPTION("Broadcom NetXtreme II " 89 "BCM57710/57711/57711E/" 90 "57712/57712_MF/57800/57800_MF/57810/57810_MF/" 91 "57840/57840_MF Driver"); 92MODULE_LICENSE("GPL"); 93MODULE_VERSION(DRV_MODULE_VERSION); 94MODULE_FIRMWARE(FW_FILE_NAME_E1); 95MODULE_FIRMWARE(FW_FILE_NAME_E1H); 96MODULE_FIRMWARE(FW_FILE_NAME_E2); 97 98int bnx2x_num_queues; 99module_param_named(num_queues, bnx2x_num_queues, int, S_IRUGO); 100MODULE_PARM_DESC(num_queues, 101 " Set number of queues (default is as a number of CPUs)"); 102 103static int disable_tpa; 104module_param(disable_tpa, int, S_IRUGO); 105MODULE_PARM_DESC(disable_tpa, " Disable the TPA (LRO) feature"); 106 107static int int_mode; 108module_param(int_mode, int, S_IRUGO); 109MODULE_PARM_DESC(int_mode, " Force interrupt mode other than MSI-X " 110 "(1 INT#x; 2 MSI)"); 111 112static int dropless_fc; 113module_param(dropless_fc, int, S_IRUGO); 114MODULE_PARM_DESC(dropless_fc, " Pause on exhausted host ring"); 115 116static int mrrs = -1; 117module_param(mrrs, int, S_IRUGO); 118MODULE_PARM_DESC(mrrs, " Force Max Read Req Size (0..3) (for debug)"); 119 120static int debug; 121module_param(debug, int, S_IRUGO); 122MODULE_PARM_DESC(debug, " Default debug msglevel"); 123 124static struct workqueue_struct *bnx2x_wq; 125struct workqueue_struct *bnx2x_iov_wq; 126 127struct bnx2x_mac_vals { 128 u32 xmac_addr; 129 u32 xmac_val; 130 u32 emac_addr; 131 u32 emac_val; 132 u32 umac_addr[2]; 133 u32 umac_val[2]; 134 u32 bmac_addr; 135 u32 bmac_val[2]; 136}; 137 138enum bnx2x_board_type { 139 BCM57710 = 0, 140 BCM57711, 141 BCM57711E, 142 BCM57712, 143 BCM57712_MF, 144 BCM57712_VF, 145 BCM57800, 146 BCM57800_MF, 147 BCM57800_VF, 148 BCM57810, 149 BCM57810_MF, 150 BCM57810_VF, 151 BCM57840_4_10, 152 BCM57840_2_20, 153 BCM57840_MF, 154 BCM57840_VF, 155 BCM57811, 156 BCM57811_MF, 157 BCM57840_O, 158 BCM57840_MFO, 159 BCM57811_VF 160}; 161 162/* indexed by board_type, above */ 163static struct { 164 char *name; 165} board_info[] = { 166 [BCM57710] = { "Broadcom NetXtreme II BCM57710 10 Gigabit PCIe [Everest]" }, 167 [BCM57711] = { "Broadcom NetXtreme II BCM57711 10 Gigabit PCIe" }, 168 [BCM57711E] = { "Broadcom NetXtreme II BCM57711E 10 Gigabit PCIe" }, 169 [BCM57712] = { "Broadcom NetXtreme II BCM57712 10 Gigabit Ethernet" }, 170 [BCM57712_MF] = { "Broadcom NetXtreme II BCM57712 10 Gigabit Ethernet Multi Function" }, 171 [BCM57712_VF] = { "Broadcom NetXtreme II BCM57712 10 Gigabit Ethernet Virtual Function" }, 172 [BCM57800] = { "Broadcom NetXtreme II BCM57800 10 Gigabit Ethernet" }, 173 [BCM57800_MF] = { "Broadcom NetXtreme II BCM57800 10 Gigabit Ethernet Multi Function" }, 174 [BCM57800_VF] = { "Broadcom NetXtreme II BCM57800 10 Gigabit Ethernet Virtual Function" }, 175 [BCM57810] = { "Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet" }, 176 [BCM57810_MF] = { "Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet Multi Function" }, 177 [BCM57810_VF] = { "Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet Virtual Function" }, 178 [BCM57840_4_10] = { "Broadcom NetXtreme II BCM57840 10 Gigabit Ethernet" }, 179 [BCM57840_2_20] = { "Broadcom NetXtreme II BCM57840 20 Gigabit Ethernet" }, 180 [BCM57840_MF] = { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet Multi Function" }, 181 [BCM57840_VF] = { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet Virtual Function" }, 182 [BCM57811] = { "Broadcom NetXtreme II BCM57811 10 Gigabit Ethernet" }, 183 [BCM57811_MF] = { "Broadcom NetXtreme II BCM57811 10 Gigabit Ethernet Multi Function" }, 184 [BCM57840_O] = { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet" }, 185 [BCM57840_MFO] = { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet Multi Function" }, 186 [BCM57811_VF] = { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet Virtual Function" } 187}; 188 189#ifndef PCI_DEVICE_ID_NX2_57710 190#define PCI_DEVICE_ID_NX2_57710 CHIP_NUM_57710 191#endif 192#ifndef PCI_DEVICE_ID_NX2_57711 193#define PCI_DEVICE_ID_NX2_57711 CHIP_NUM_57711 194#endif 195#ifndef PCI_DEVICE_ID_NX2_57711E 196#define PCI_DEVICE_ID_NX2_57711E CHIP_NUM_57711E 197#endif 198#ifndef PCI_DEVICE_ID_NX2_57712 199#define PCI_DEVICE_ID_NX2_57712 CHIP_NUM_57712 200#endif 201#ifndef PCI_DEVICE_ID_NX2_57712_MF 202#define PCI_DEVICE_ID_NX2_57712_MF CHIP_NUM_57712_MF 203#endif 204#ifndef PCI_DEVICE_ID_NX2_57712_VF 205#define PCI_DEVICE_ID_NX2_57712_VF CHIP_NUM_57712_VF 206#endif 207#ifndef PCI_DEVICE_ID_NX2_57800 208#define PCI_DEVICE_ID_NX2_57800 CHIP_NUM_57800 209#endif 210#ifndef PCI_DEVICE_ID_NX2_57800_MF 211#define PCI_DEVICE_ID_NX2_57800_MF CHIP_NUM_57800_MF 212#endif 213#ifndef PCI_DEVICE_ID_NX2_57800_VF 214#define PCI_DEVICE_ID_NX2_57800_VF CHIP_NUM_57800_VF 215#endif 216#ifndef PCI_DEVICE_ID_NX2_57810 217#define PCI_DEVICE_ID_NX2_57810 CHIP_NUM_57810 218#endif 219#ifndef PCI_DEVICE_ID_NX2_57810_MF 220#define PCI_DEVICE_ID_NX2_57810_MF CHIP_NUM_57810_MF 221#endif 222#ifndef PCI_DEVICE_ID_NX2_57840_O 223#define PCI_DEVICE_ID_NX2_57840_O CHIP_NUM_57840_OBSOLETE 224#endif 225#ifndef PCI_DEVICE_ID_NX2_57810_VF 226#define PCI_DEVICE_ID_NX2_57810_VF CHIP_NUM_57810_VF 227#endif 228#ifndef PCI_DEVICE_ID_NX2_57840_4_10 229#define PCI_DEVICE_ID_NX2_57840_4_10 CHIP_NUM_57840_4_10 230#endif 231#ifndef PCI_DEVICE_ID_NX2_57840_2_20 232#define PCI_DEVICE_ID_NX2_57840_2_20 CHIP_NUM_57840_2_20 233#endif 234#ifndef PCI_DEVICE_ID_NX2_57840_MFO 235#define PCI_DEVICE_ID_NX2_57840_MFO CHIP_NUM_57840_MF_OBSOLETE 236#endif 237#ifndef PCI_DEVICE_ID_NX2_57840_MF 238#define PCI_DEVICE_ID_NX2_57840_MF CHIP_NUM_57840_MF 239#endif 240#ifndef PCI_DEVICE_ID_NX2_57840_VF 241#define PCI_DEVICE_ID_NX2_57840_VF CHIP_NUM_57840_VF 242#endif 243#ifndef PCI_DEVICE_ID_NX2_57811 244#define PCI_DEVICE_ID_NX2_57811 CHIP_NUM_57811 245#endif 246#ifndef PCI_DEVICE_ID_NX2_57811_MF 247#define PCI_DEVICE_ID_NX2_57811_MF CHIP_NUM_57811_MF 248#endif 249#ifndef PCI_DEVICE_ID_NX2_57811_VF 250#define PCI_DEVICE_ID_NX2_57811_VF CHIP_NUM_57811_VF 251#endif 252 253static const struct pci_device_id bnx2x_pci_tbl[] = { 254 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57710), BCM57710 }, 255 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57711), BCM57711 }, 256 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57711E), BCM57711E }, 257 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57712), BCM57712 }, 258 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57712_MF), BCM57712_MF }, 259 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57712_VF), BCM57712_VF }, 260 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57800), BCM57800 }, 261 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57800_MF), BCM57800_MF }, 262 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57800_VF), BCM57800_VF }, 263 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57810), BCM57810 }, 264 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57810_MF), BCM57810_MF }, 265 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57840_O), BCM57840_O }, 266 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57840_4_10), BCM57840_4_10 }, 267 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57840_2_20), BCM57840_2_20 }, 268 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57810_VF), BCM57810_VF }, 269 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57840_MFO), BCM57840_MFO }, 270 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57840_MF), BCM57840_MF }, 271 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57840_VF), BCM57840_VF }, 272 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57811), BCM57811 }, 273 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57811_MF), BCM57811_MF }, 274 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57811_VF), BCM57811_VF }, 275 { 0 } 276}; 277 278MODULE_DEVICE_TABLE(pci, bnx2x_pci_tbl); 279 280/* Global resources for unloading a previously loaded device */ 281#define BNX2X_PREV_WAIT_NEEDED 1 282static DEFINE_SEMAPHORE(bnx2x_prev_sem); 283static LIST_HEAD(bnx2x_prev_list); 284 285/* Forward declaration */ 286static struct cnic_eth_dev *bnx2x_cnic_probe(struct net_device *dev); 287static u32 bnx2x_rx_ustorm_prods_offset(struct bnx2x_fastpath *fp); 288static int bnx2x_set_storm_rx_mode(struct bnx2x *bp); 289 290/**************************************************************************** 291* General service functions 292****************************************************************************/ 293 294static int bnx2x_hwtstamp_ioctl(struct bnx2x *bp, struct ifreq *ifr); 295 296static void __storm_memset_dma_mapping(struct bnx2x *bp, 297 u32 addr, dma_addr_t mapping) 298{ 299 REG_WR(bp, addr, U64_LO(mapping)); 300 REG_WR(bp, addr + 4, U64_HI(mapping)); 301} 302 303static void storm_memset_spq_addr(struct bnx2x *bp, 304 dma_addr_t mapping, u16 abs_fid) 305{ 306 u32 addr = XSEM_REG_FAST_MEMORY + 307 XSTORM_SPQ_PAGE_BASE_OFFSET(abs_fid); 308 309 __storm_memset_dma_mapping(bp, addr, mapping); 310} 311 312static void storm_memset_vf_to_pf(struct bnx2x *bp, u16 abs_fid, 313 u16 pf_id) 314{ 315 REG_WR8(bp, BAR_XSTRORM_INTMEM + XSTORM_VF_TO_PF_OFFSET(abs_fid), 316 pf_id); 317 REG_WR8(bp, BAR_CSTRORM_INTMEM + CSTORM_VF_TO_PF_OFFSET(abs_fid), 318 pf_id); 319 REG_WR8(bp, BAR_TSTRORM_INTMEM + TSTORM_VF_TO_PF_OFFSET(abs_fid), 320 pf_id); 321 REG_WR8(bp, BAR_USTRORM_INTMEM + USTORM_VF_TO_PF_OFFSET(abs_fid), 322 pf_id); 323} 324 325static void storm_memset_func_en(struct bnx2x *bp, u16 abs_fid, 326 u8 enable) 327{ 328 REG_WR8(bp, BAR_XSTRORM_INTMEM + XSTORM_FUNC_EN_OFFSET(abs_fid), 329 enable); 330 REG_WR8(bp, BAR_CSTRORM_INTMEM + CSTORM_FUNC_EN_OFFSET(abs_fid), 331 enable); 332 REG_WR8(bp, BAR_TSTRORM_INTMEM + TSTORM_FUNC_EN_OFFSET(abs_fid), 333 enable); 334 REG_WR8(bp, BAR_USTRORM_INTMEM + USTORM_FUNC_EN_OFFSET(abs_fid), 335 enable); 336} 337 338static void storm_memset_eq_data(struct bnx2x *bp, 339 struct event_ring_data *eq_data, 340 u16 pfid) 341{ 342 size_t size = sizeof(struct event_ring_data); 343 344 u32 addr = BAR_CSTRORM_INTMEM + CSTORM_EVENT_RING_DATA_OFFSET(pfid); 345 346 __storm_memset_struct(bp, addr, size, (u32 *)eq_data); 347} 348 349static void storm_memset_eq_prod(struct bnx2x *bp, u16 eq_prod, 350 u16 pfid) 351{ 352 u32 addr = BAR_CSTRORM_INTMEM + CSTORM_EVENT_RING_PROD_OFFSET(pfid); 353 REG_WR16(bp, addr, eq_prod); 354} 355 356/* used only at init 357 * locking is done by mcp 358 */ 359static void bnx2x_reg_wr_ind(struct bnx2x *bp, u32 addr, u32 val) 360{ 361 pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS, addr); 362 pci_write_config_dword(bp->pdev, PCICFG_GRC_DATA, val); 363 pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS, 364 PCICFG_VENDOR_ID_OFFSET); 365} 366 367static u32 bnx2x_reg_rd_ind(struct bnx2x *bp, u32 addr) 368{ 369 u32 val; 370 371 pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS, addr); 372 pci_read_config_dword(bp->pdev, PCICFG_GRC_DATA, &val); 373 pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS, 374 PCICFG_VENDOR_ID_OFFSET); 375 376 return val; 377} 378 379#define DMAE_DP_SRC_GRC "grc src_addr [%08x]" 380#define DMAE_DP_SRC_PCI "pci src_addr [%x:%08x]" 381#define DMAE_DP_DST_GRC "grc dst_addr [%08x]" 382#define DMAE_DP_DST_PCI "pci dst_addr [%x:%08x]" 383#define DMAE_DP_DST_NONE "dst_addr [none]" 384 385static void bnx2x_dp_dmae(struct bnx2x *bp, 386 struct dmae_command *dmae, int msglvl) 387{ 388 u32 src_type = dmae->opcode & DMAE_COMMAND_SRC; 389 int i; 390 391 switch (dmae->opcode & DMAE_COMMAND_DST) { 392 case DMAE_CMD_DST_PCI: 393 if (src_type == DMAE_CMD_SRC_PCI) 394 DP(msglvl, "DMAE: opcode 0x%08x\n" 395 "src [%x:%08x], len [%d*4], dst [%x:%08x]\n" 396 "comp_addr [%x:%08x], comp_val 0x%08x\n", 397 dmae->opcode, dmae->src_addr_hi, dmae->src_addr_lo, 398 dmae->len, dmae->dst_addr_hi, dmae->dst_addr_lo, 399 dmae->comp_addr_hi, dmae->comp_addr_lo, 400 dmae->comp_val); 401 else 402 DP(msglvl, "DMAE: opcode 0x%08x\n" 403 "src [%08x], len [%d*4], dst [%x:%08x]\n" 404 "comp_addr [%x:%08x], comp_val 0x%08x\n", 405 dmae->opcode, dmae->src_addr_lo >> 2, 406 dmae->len, dmae->dst_addr_hi, dmae->dst_addr_lo, 407 dmae->comp_addr_hi, dmae->comp_addr_lo, 408 dmae->comp_val); 409 break; 410 case DMAE_CMD_DST_GRC: 411 if (src_type == DMAE_CMD_SRC_PCI) 412 DP(msglvl, "DMAE: opcode 0x%08x\n" 413 "src [%x:%08x], len [%d*4], dst_addr [%08x]\n" 414 "comp_addr [%x:%08x], comp_val 0x%08x\n", 415 dmae->opcode, dmae->src_addr_hi, dmae->src_addr_lo, 416 dmae->len, dmae->dst_addr_lo >> 2, 417 dmae->comp_addr_hi, dmae->comp_addr_lo, 418 dmae->comp_val); 419 else 420 DP(msglvl, "DMAE: opcode 0x%08x\n" 421 "src [%08x], len [%d*4], dst [%08x]\n" 422 "comp_addr [%x:%08x], comp_val 0x%08x\n", 423 dmae->opcode, dmae->src_addr_lo >> 2, 424 dmae->len, dmae->dst_addr_lo >> 2, 425 dmae->comp_addr_hi, dmae->comp_addr_lo, 426 dmae->comp_val); 427 break; 428 default: 429 if (src_type == DMAE_CMD_SRC_PCI) 430 DP(msglvl, "DMAE: opcode 0x%08x\n" 431 "src_addr [%x:%08x] len [%d * 4] dst_addr [none]\n" 432 "comp_addr [%x:%08x] comp_val 0x%08x\n", 433 dmae->opcode, dmae->src_addr_hi, dmae->src_addr_lo, 434 dmae->len, dmae->comp_addr_hi, dmae->comp_addr_lo, 435 dmae->comp_val); 436 else 437 DP(msglvl, "DMAE: opcode 0x%08x\n" 438 "src_addr [%08x] len [%d * 4] dst_addr [none]\n" 439 "comp_addr [%x:%08x] comp_val 0x%08x\n", 440 dmae->opcode, dmae->src_addr_lo >> 2, 441 dmae->len, dmae->comp_addr_hi, dmae->comp_addr_lo, 442 dmae->comp_val); 443 break; 444 } 445 446 for (i = 0; i < (sizeof(struct dmae_command)/4); i++) 447 DP(msglvl, "DMAE RAW [%02d]: 0x%08x\n", 448 i, *(((u32 *)dmae) + i)); 449} 450 451/* copy command into DMAE command memory and set DMAE command go */ 452void bnx2x_post_dmae(struct bnx2x *bp, struct dmae_command *dmae, int idx) 453{ 454 u32 cmd_offset; 455 int i; 456 457 cmd_offset = (DMAE_REG_CMD_MEM + sizeof(struct dmae_command) * idx); 458 for (i = 0; i < (sizeof(struct dmae_command)/4); i++) { 459 REG_WR(bp, cmd_offset + i*4, *(((u32 *)dmae) + i)); 460 } 461 REG_WR(bp, dmae_reg_go_c[idx], 1); 462} 463 464u32 bnx2x_dmae_opcode_add_comp(u32 opcode, u8 comp_type) 465{ 466 return opcode | ((comp_type << DMAE_COMMAND_C_DST_SHIFT) | 467 DMAE_CMD_C_ENABLE); 468} 469 470u32 bnx2x_dmae_opcode_clr_src_reset(u32 opcode) 471{ 472 return opcode & ~DMAE_CMD_SRC_RESET; 473} 474 475u32 bnx2x_dmae_opcode(struct bnx2x *bp, u8 src_type, u8 dst_type, 476 bool with_comp, u8 comp_type) 477{ 478 u32 opcode = 0; 479 480 opcode |= ((src_type << DMAE_COMMAND_SRC_SHIFT) | 481 (dst_type << DMAE_COMMAND_DST_SHIFT)); 482 483 opcode |= (DMAE_CMD_SRC_RESET | DMAE_CMD_DST_RESET); 484 485 opcode |= (BP_PORT(bp) ? DMAE_CMD_PORT_1 : DMAE_CMD_PORT_0); 486 opcode |= ((BP_VN(bp) << DMAE_CMD_E1HVN_SHIFT) | 487 (BP_VN(bp) << DMAE_COMMAND_DST_VN_SHIFT)); 488 opcode |= (DMAE_COM_SET_ERR << DMAE_COMMAND_ERR_POLICY_SHIFT); 489 490#ifdef __BIG_ENDIAN 491 opcode |= DMAE_CMD_ENDIANITY_B_DW_SWAP; 492#else 493 opcode |= DMAE_CMD_ENDIANITY_DW_SWAP; 494#endif 495 if (with_comp) 496 opcode = bnx2x_dmae_opcode_add_comp(opcode, comp_type); 497 return opcode; 498} 499 500void bnx2x_prep_dmae_with_comp(struct bnx2x *bp, 501 struct dmae_command *dmae, 502 u8 src_type, u8 dst_type) 503{ 504 memset(dmae, 0, sizeof(struct dmae_command)); 505 506 /* set the opcode */ 507 dmae->opcode = bnx2x_dmae_opcode(bp, src_type, dst_type, 508 true, DMAE_COMP_PCI); 509 510 /* fill in the completion parameters */ 511 dmae->comp_addr_lo = U64_LO(bnx2x_sp_mapping(bp, wb_comp)); 512 dmae->comp_addr_hi = U64_HI(bnx2x_sp_mapping(bp, wb_comp)); 513 dmae->comp_val = DMAE_COMP_VAL; 514} 515 516/* issue a dmae command over the init-channel and wait for completion */ 517int bnx2x_issue_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae, 518 u32 *comp) 519{ 520 int cnt = CHIP_REV_IS_SLOW(bp) ? (400000) : 4000; 521 int rc = 0; 522 523 bnx2x_dp_dmae(bp, dmae, BNX2X_MSG_DMAE); 524 525 /* Lock the dmae channel. Disable BHs to prevent a dead-lock 526 * as long as this code is called both from syscall context and 527 * from ndo_set_rx_mode() flow that may be called from BH. 528 */ 529 530 spin_lock_bh(&bp->dmae_lock); 531 532 /* reset completion */ 533 *comp = 0; 534 535 /* post the command on the channel used for initializations */ 536 bnx2x_post_dmae(bp, dmae, INIT_DMAE_C(bp)); 537 538 /* wait for completion */ 539 udelay(5); 540 while ((*comp & ~DMAE_PCI_ERR_FLAG) != DMAE_COMP_VAL) { 541 542 if (!cnt || 543 (bp->recovery_state != BNX2X_RECOVERY_DONE && 544 bp->recovery_state != BNX2X_RECOVERY_NIC_LOADING)) { 545 BNX2X_ERR("DMAE timeout!\n"); 546 rc = DMAE_TIMEOUT; 547 goto unlock; 548 } 549 cnt--; 550 udelay(50); 551 } 552 if (*comp & DMAE_PCI_ERR_FLAG) { 553 BNX2X_ERR("DMAE PCI error!\n"); 554 rc = DMAE_PCI_ERROR; 555 } 556 557unlock: 558 559 spin_unlock_bh(&bp->dmae_lock); 560 561 return rc; 562} 563 564void bnx2x_write_dmae(struct bnx2x *bp, dma_addr_t dma_addr, u32 dst_addr, 565 u32 len32) 566{ 567 int rc; 568 struct dmae_command dmae; 569 570 if (!bp->dmae_ready) { 571 u32 *data = bnx2x_sp(bp, wb_data[0]); 572 573 if (CHIP_IS_E1(bp)) 574 bnx2x_init_ind_wr(bp, dst_addr, data, len32); 575 else 576 bnx2x_init_str_wr(bp, dst_addr, data, len32); 577 return; 578 } 579 580 /* set opcode and fixed command fields */ 581 bnx2x_prep_dmae_with_comp(bp, &dmae, DMAE_SRC_PCI, DMAE_DST_GRC); 582 583 /* fill in addresses and len */ 584 dmae.src_addr_lo = U64_LO(dma_addr); 585 dmae.src_addr_hi = U64_HI(dma_addr); 586 dmae.dst_addr_lo = dst_addr >> 2; 587 dmae.dst_addr_hi = 0; 588 dmae.len = len32; 589 590 /* issue the command and wait for completion */ 591 rc = bnx2x_issue_dmae_with_comp(bp, &dmae, bnx2x_sp(bp, wb_comp)); 592 if (rc) { 593 BNX2X_ERR("DMAE returned failure %d\n", rc); 594#ifdef BNX2X_STOP_ON_ERROR 595 bnx2x_panic(); 596#endif 597 } 598} 599 600void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32) 601{ 602 int rc; 603 struct dmae_command dmae; 604 605 if (!bp->dmae_ready) { 606 u32 *data = bnx2x_sp(bp, wb_data[0]); 607 int i; 608 609 if (CHIP_IS_E1(bp)) 610 for (i = 0; i < len32; i++) 611 data[i] = bnx2x_reg_rd_ind(bp, src_addr + i*4); 612 else 613 for (i = 0; i < len32; i++) 614 data[i] = REG_RD(bp, src_addr + i*4); 615 616 return; 617 } 618 619 /* set opcode and fixed command fields */ 620 bnx2x_prep_dmae_with_comp(bp, &dmae, DMAE_SRC_GRC, DMAE_DST_PCI); 621 622 /* fill in addresses and len */ 623 dmae.src_addr_lo = src_addr >> 2; 624 dmae.src_addr_hi = 0; 625 dmae.dst_addr_lo = U64_LO(bnx2x_sp_mapping(bp, wb_data)); 626 dmae.dst_addr_hi = U64_HI(bnx2x_sp_mapping(bp, wb_data)); 627 dmae.len = len32; 628 629 /* issue the command and wait for completion */ 630 rc = bnx2x_issue_dmae_with_comp(bp, &dmae, bnx2x_sp(bp, wb_comp)); 631 if (rc) { 632 BNX2X_ERR("DMAE returned failure %d\n", rc); 633#ifdef BNX2X_STOP_ON_ERROR 634 bnx2x_panic(); 635#endif 636 } 637} 638 639static void bnx2x_write_dmae_phys_len(struct bnx2x *bp, dma_addr_t phys_addr, 640 u32 addr, u32 len) 641{ 642 int dmae_wr_max = DMAE_LEN32_WR_MAX(bp); 643 int offset = 0; 644 645 while (len > dmae_wr_max) { 646 bnx2x_write_dmae(bp, phys_addr + offset, 647 addr + offset, dmae_wr_max); 648 offset += dmae_wr_max * 4; 649 len -= dmae_wr_max; 650 } 651 652 bnx2x_write_dmae(bp, phys_addr + offset, addr + offset, len); 653} 654 655enum storms { 656 XSTORM, 657 TSTORM, 658 CSTORM, 659 USTORM, 660 MAX_STORMS 661}; 662 663#define STORMS_NUM 4 664#define REGS_IN_ENTRY 4 665 666static inline int bnx2x_get_assert_list_entry(struct bnx2x *bp, 667 enum storms storm, 668 int entry) 669{ 670 switch (storm) { 671 case XSTORM: 672 return XSTORM_ASSERT_LIST_OFFSET(entry); 673 case TSTORM: 674 return TSTORM_ASSERT_LIST_OFFSET(entry); 675 case CSTORM: 676 return CSTORM_ASSERT_LIST_OFFSET(entry); 677 case USTORM: 678 return USTORM_ASSERT_LIST_OFFSET(entry); 679 case MAX_STORMS: 680 default: 681 BNX2X_ERR("unknown storm\n"); 682 } 683 return -EINVAL; 684} 685 686static int bnx2x_mc_assert(struct bnx2x *bp) 687{ 688 char last_idx; 689 int i, j, rc = 0; 690 enum storms storm; 691 u32 regs[REGS_IN_ENTRY]; 692 u32 bar_storm_intmem[STORMS_NUM] = { 693 BAR_XSTRORM_INTMEM, 694 BAR_TSTRORM_INTMEM, 695 BAR_CSTRORM_INTMEM, 696 BAR_USTRORM_INTMEM 697 }; 698 u32 storm_assert_list_index[STORMS_NUM] = { 699 XSTORM_ASSERT_LIST_INDEX_OFFSET, 700 TSTORM_ASSERT_LIST_INDEX_OFFSET, 701 CSTORM_ASSERT_LIST_INDEX_OFFSET, 702 USTORM_ASSERT_LIST_INDEX_OFFSET 703 }; 704 char *storms_string[STORMS_NUM] = { 705 "XSTORM", 706 "TSTORM", 707 "CSTORM", 708 "USTORM" 709 }; 710 711 for (storm = XSTORM; storm < MAX_STORMS; storm++) { 712 last_idx = REG_RD8(bp, bar_storm_intmem[storm] + 713 storm_assert_list_index[storm]); 714 if (last_idx) 715 BNX2X_ERR("%s_ASSERT_LIST_INDEX 0x%x\n", 716 storms_string[storm], last_idx); 717 718 /* print the asserts */ 719 for (i = 0; i < STROM_ASSERT_ARRAY_SIZE; i++) { 720 /* read a single assert entry */ 721 for (j = 0; j < REGS_IN_ENTRY; j++) 722 regs[j] = REG_RD(bp, bar_storm_intmem[storm] + 723 bnx2x_get_assert_list_entry(bp, 724 storm, 725 i) + 726 sizeof(u32) * j); 727 728 /* log entry if it contains a valid assert */ 729 if (regs[0] != COMMON_ASM_INVALID_ASSERT_OPCODE) { 730 BNX2X_ERR("%s_ASSERT_INDEX 0x%x = 0x%08x 0x%08x 0x%08x 0x%08x\n", 731 storms_string[storm], i, regs[3], 732 regs[2], regs[1], regs[0]); 733 rc++; 734 } else { 735 break; 736 } 737 } 738 } 739 740 BNX2X_ERR("Chip Revision: %s, FW Version: %d_%d_%d\n", 741 CHIP_IS_E1(bp) ? "everest1" : 742 CHIP_IS_E1H(bp) ? "everest1h" : 743 CHIP_IS_E2(bp) ? "everest2" : "everest3", 744 BCM_5710_FW_MAJOR_VERSION, 745 BCM_5710_FW_MINOR_VERSION, 746 BCM_5710_FW_REVISION_VERSION); 747 748 return rc; 749} 750 751#define MCPR_TRACE_BUFFER_SIZE (0x800) 752#define SCRATCH_BUFFER_SIZE(bp) \ 753 (CHIP_IS_E1(bp) ? 0x10000 : (CHIP_IS_E1H(bp) ? 0x20000 : 0x28000)) 754 755void bnx2x_fw_dump_lvl(struct bnx2x *bp, const char *lvl) 756{ 757 u32 addr, val; 758 u32 mark, offset; 759 __be32 data[9]; 760 int word; 761 u32 trace_shmem_base; 762 if (BP_NOMCP(bp)) { 763 BNX2X_ERR("NO MCP - can not dump\n"); 764 return; 765 } 766 netdev_printk(lvl, bp->dev, "bc %d.%d.%d\n", 767 (bp->common.bc_ver & 0xff0000) >> 16, 768 (bp->common.bc_ver & 0xff00) >> 8, 769 (bp->common.bc_ver & 0xff)); 770 771 val = REG_RD(bp, MCP_REG_MCPR_CPU_PROGRAM_COUNTER); 772 if (val == REG_RD(bp, MCP_REG_MCPR_CPU_PROGRAM_COUNTER)) 773 BNX2X_ERR("%s" "MCP PC at 0x%x\n", lvl, val); 774 775 if (BP_PATH(bp) == 0) 776 trace_shmem_base = bp->common.shmem_base; 777 else 778 trace_shmem_base = SHMEM2_RD(bp, other_shmem_base_addr); 779 780 /* sanity */ 781 if (trace_shmem_base < MCPR_SCRATCH_BASE(bp) + MCPR_TRACE_BUFFER_SIZE || 782 trace_shmem_base >= MCPR_SCRATCH_BASE(bp) + 783 SCRATCH_BUFFER_SIZE(bp)) { 784 BNX2X_ERR("Unable to dump trace buffer (mark %x)\n", 785 trace_shmem_base); 786 return; 787 } 788 789 addr = trace_shmem_base - MCPR_TRACE_BUFFER_SIZE; 790 791 /* validate TRCB signature */ 792 mark = REG_RD(bp, addr); 793 if (mark != MFW_TRACE_SIGNATURE) { 794 BNX2X_ERR("Trace buffer signature is missing."); 795 return ; 796 } 797 798 /* read cyclic buffer pointer */ 799 addr += 4; 800 mark = REG_RD(bp, addr); 801 mark = MCPR_SCRATCH_BASE(bp) + ((mark + 0x3) & ~0x3) - 0x08000000; 802 if (mark >= trace_shmem_base || mark < addr + 4) { 803 BNX2X_ERR("Mark doesn't fall inside Trace Buffer\n"); 804 return; 805 } 806 printk("%s" "begin fw dump (mark 0x%x)\n", lvl, mark); 807 808 printk("%s", lvl); 809 810 /* dump buffer after the mark */ 811 for (offset = mark; offset < trace_shmem_base; offset += 0x8*4) { 812 for (word = 0; word < 8; word++) 813 data[word] = htonl(REG_RD(bp, offset + 4*word)); 814 data[8] = 0x0; 815 pr_cont("%s", (char *)data); 816 } 817 818 /* dump buffer before the mark */ 819 for (offset = addr + 4; offset <= mark; offset += 0x8*4) { 820 for (word = 0; word < 8; word++) 821 data[word] = htonl(REG_RD(bp, offset + 4*word)); 822 data[8] = 0x0; 823 pr_cont("%s", (char *)data); 824 } 825 printk("%s" "end of fw dump\n", lvl); 826} 827 828static void bnx2x_fw_dump(struct bnx2x *bp) 829{ 830 bnx2x_fw_dump_lvl(bp, KERN_ERR); 831} 832 833static void bnx2x_hc_int_disable(struct bnx2x *bp) 834{ 835 int port = BP_PORT(bp); 836 u32 addr = port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0; 837 u32 val = REG_RD(bp, addr); 838 839 /* in E1 we must use only PCI configuration space to disable 840 * MSI/MSIX capability 841 * It's forbidden to disable IGU_PF_CONF_MSI_MSIX_EN in HC block 842 */ 843 if (CHIP_IS_E1(bp)) { 844 /* Since IGU_PF_CONF_MSI_MSIX_EN still always on 845 * Use mask register to prevent from HC sending interrupts 846 * after we exit the function 847 */ 848 REG_WR(bp, HC_REG_INT_MASK + port*4, 0); 849 850 val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 | 851 HC_CONFIG_0_REG_INT_LINE_EN_0 | 852 HC_CONFIG_0_REG_ATTN_BIT_EN_0); 853 } else 854 val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 | 855 HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 | 856 HC_CONFIG_0_REG_INT_LINE_EN_0 | 857 HC_CONFIG_0_REG_ATTN_BIT_EN_0); 858 859 DP(NETIF_MSG_IFDOWN, 860 "write %x to HC %d (addr 0x%x)\n", 861 val, port, addr); 862 863 /* flush all outstanding writes */ 864 mmiowb(); 865 866 REG_WR(bp, addr, val); 867 if (REG_RD(bp, addr) != val) 868 BNX2X_ERR("BUG! Proper val not read from IGU!\n"); 869} 870 871static void bnx2x_igu_int_disable(struct bnx2x *bp) 872{ 873 u32 val = REG_RD(bp, IGU_REG_PF_CONFIGURATION); 874 875 val &= ~(IGU_PF_CONF_MSI_MSIX_EN | 876 IGU_PF_CONF_INT_LINE_EN | 877 IGU_PF_CONF_ATTN_BIT_EN); 878 879 DP(NETIF_MSG_IFDOWN, "write %x to IGU\n", val); 880 881 /* flush all outstanding writes */ 882 mmiowb(); 883 884 REG_WR(bp, IGU_REG_PF_CONFIGURATION, val); 885 if (REG_RD(bp, IGU_REG_PF_CONFIGURATION) != val) 886 BNX2X_ERR("BUG! Proper val not read from IGU!\n"); 887} 888 889static void bnx2x_int_disable(struct bnx2x *bp) 890{ 891 if (bp->common.int_block == INT_BLOCK_HC) 892 bnx2x_hc_int_disable(bp); 893 else 894 bnx2x_igu_int_disable(bp); 895} 896 897void bnx2x_panic_dump(struct bnx2x *bp, bool disable_int) 898{ 899 int i; 900 u16 j; 901 struct hc_sp_status_block_data sp_sb_data; 902 int func = BP_FUNC(bp); 903#ifdef BNX2X_STOP_ON_ERROR 904 u16 start = 0, end = 0; 905 u8 cos; 906#endif 907 if (IS_PF(bp) && disable_int) 908 bnx2x_int_disable(bp); 909 910 bp->stats_state = STATS_STATE_DISABLED; 911 bp->eth_stats.unrecoverable_error++; 912 DP(BNX2X_MSG_STATS, "stats_state - DISABLED\n"); 913 914 BNX2X_ERR("begin crash dump -----------------\n"); 915 916 /* Indices */ 917 /* Common */ 918 if (IS_PF(bp)) { 919 struct host_sp_status_block *def_sb = bp->def_status_blk; 920 int data_size, cstorm_offset; 921 922 BNX2X_ERR("def_idx(0x%x) def_att_idx(0x%x) attn_state(0x%x) spq_prod_idx(0x%x) next_stats_cnt(0x%x)\n", 923 bp->def_idx, bp->def_att_idx, bp->attn_state, 924 bp->spq_prod_idx, bp->stats_counter); 925 BNX2X_ERR("DSB: attn bits(0x%x) ack(0x%x) id(0x%x) idx(0x%x)\n", 926 def_sb->atten_status_block.attn_bits, 927 def_sb->atten_status_block.attn_bits_ack, 928 def_sb->atten_status_block.status_block_id, 929 def_sb->atten_status_block.attn_bits_index); 930 BNX2X_ERR(" def ("); 931 for (i = 0; i < HC_SP_SB_MAX_INDICES; i++) 932 pr_cont("0x%x%s", 933 def_sb->sp_sb.index_values[i], 934 (i == HC_SP_SB_MAX_INDICES - 1) ? ") " : " "); 935 936 data_size = sizeof(struct hc_sp_status_block_data) / 937 sizeof(u32); 938 cstorm_offset = CSTORM_SP_STATUS_BLOCK_DATA_OFFSET(func); 939 for (i = 0; i < data_size; i++) 940 *((u32 *)&sp_sb_data + i) = 941 REG_RD(bp, BAR_CSTRORM_INTMEM + cstorm_offset + 942 i * sizeof(u32)); 943 944 pr_cont("igu_sb_id(0x%x) igu_seg_id(0x%x) pf_id(0x%x) vnic_id(0x%x) vf_id(0x%x) vf_valid (0x%x) state(0x%x)\n", 945 sp_sb_data.igu_sb_id, 946 sp_sb_data.igu_seg_id, 947 sp_sb_data.p_func.pf_id, 948 sp_sb_data.p_func.vnic_id, 949 sp_sb_data.p_func.vf_id, 950 sp_sb_data.p_func.vf_valid, 951 sp_sb_data.state); 952 } 953 954 for_each_eth_queue(bp, i) { 955 struct bnx2x_fastpath *fp = &bp->fp[i]; 956 int loop; 957 struct hc_status_block_data_e2 sb_data_e2; 958 struct hc_status_block_data_e1x sb_data_e1x; 959 struct hc_status_block_sm *hc_sm_p = 960 CHIP_IS_E1x(bp) ? 961 sb_data_e1x.common.state_machine : 962 sb_data_e2.common.state_machine; 963 struct hc_index_data *hc_index_p = 964 CHIP_IS_E1x(bp) ? 965 sb_data_e1x.index_data : 966 sb_data_e2.index_data; 967 u8 data_size, cos; 968 u32 *sb_data_p; 969 struct bnx2x_fp_txdata txdata; 970 971 if (!bp->fp) 972 break; 973 974 if (!fp->rx_cons_sb) 975 continue; 976 977 /* Rx */ 978 BNX2X_ERR("fp%d: rx_bd_prod(0x%x) rx_bd_cons(0x%x) rx_comp_prod(0x%x) rx_comp_cons(0x%x) *rx_cons_sb(0x%x)\n", 979 i, fp->rx_bd_prod, fp->rx_bd_cons, 980 fp->rx_comp_prod, 981 fp->rx_comp_cons, le16_to_cpu(*fp->rx_cons_sb)); 982 BNX2X_ERR(" rx_sge_prod(0x%x) last_max_sge(0x%x) fp_hc_idx(0x%x)\n", 983 fp->rx_sge_prod, fp->last_max_sge, 984 le16_to_cpu(fp->fp_hc_idx)); 985 986 /* Tx */ 987 for_each_cos_in_tx_queue(fp, cos) 988 { 989 if (!fp->txdata_ptr[cos]) 990 break; 991 992 txdata = *fp->txdata_ptr[cos]; 993 994 if (!txdata.tx_cons_sb) 995 continue; 996 997 BNX2X_ERR("fp%d: tx_pkt_prod(0x%x) tx_pkt_cons(0x%x) tx_bd_prod(0x%x) tx_bd_cons(0x%x) *tx_cons_sb(0x%x)\n", 998 i, txdata.tx_pkt_prod, 999 txdata.tx_pkt_cons, txdata.tx_bd_prod, 1000 txdata.tx_bd_cons, 1001 le16_to_cpu(*txdata.tx_cons_sb)); 1002 } 1003 1004 loop = CHIP_IS_E1x(bp) ? 1005 HC_SB_MAX_INDICES_E1X : HC_SB_MAX_INDICES_E2; 1006 1007 /* host sb data */ 1008 1009 if (IS_FCOE_FP(fp)) 1010 continue; 1011 1012 BNX2X_ERR(" run indexes ("); 1013 for (j = 0; j < HC_SB_MAX_SM; j++) 1014 pr_cont("0x%x%s", 1015 fp->sb_running_index[j], 1016 (j == HC_SB_MAX_SM - 1) ? ")" : " "); 1017 1018 BNX2X_ERR(" indexes ("); 1019 for (j = 0; j < loop; j++) 1020 pr_cont("0x%x%s", 1021 fp->sb_index_values[j], 1022 (j == loop - 1) ? ")" : " "); 1023 1024 /* VF cannot access FW refelection for status block */ 1025 if (IS_VF(bp)) 1026 continue; 1027 1028 /* fw sb data */ 1029 data_size = CHIP_IS_E1x(bp) ? 1030 sizeof(struct hc_status_block_data_e1x) : 1031 sizeof(struct hc_status_block_data_e2); 1032 data_size /= sizeof(u32); 1033 sb_data_p = CHIP_IS_E1x(bp) ? 1034 (u32 *)&sb_data_e1x : 1035 (u32 *)&sb_data_e2; 1036 /* copy sb data in here */ 1037 for (j = 0; j < data_size; j++) 1038 *(sb_data_p + j) = REG_RD(bp, BAR_CSTRORM_INTMEM + 1039 CSTORM_STATUS_BLOCK_DATA_OFFSET(fp->fw_sb_id) + 1040 j * sizeof(u32)); 1041 1042 if (!CHIP_IS_E1x(bp)) { 1043 pr_cont("pf_id(0x%x) vf_id(0x%x) vf_valid(0x%x) vnic_id(0x%x) same_igu_sb_1b(0x%x) state(0x%x)\n", 1044 sb_data_e2.common.p_func.pf_id, 1045 sb_data_e2.common.p_func.vf_id, 1046 sb_data_e2.common.p_func.vf_valid, 1047 sb_data_e2.common.p_func.vnic_id, 1048 sb_data_e2.common.same_igu_sb_1b, 1049 sb_data_e2.common.state); 1050 } else { 1051 pr_cont("pf_id(0x%x) vf_id(0x%x) vf_valid(0x%x) vnic_id(0x%x) same_igu_sb_1b(0x%x) state(0x%x)\n", 1052 sb_data_e1x.common.p_func.pf_id, 1053 sb_data_e1x.common.p_func.vf_id, 1054 sb_data_e1x.common.p_func.vf_valid, 1055 sb_data_e1x.common.p_func.vnic_id, 1056 sb_data_e1x.common.same_igu_sb_1b, 1057 sb_data_e1x.common.state); 1058 } 1059 1060 /* SB_SMs data */ 1061 for (j = 0; j < HC_SB_MAX_SM; j++) { 1062 pr_cont("SM[%d] __flags (0x%x) igu_sb_id (0x%x) igu_seg_id(0x%x) time_to_expire (0x%x) timer_value(0x%x)\n", 1063 j, hc_sm_p[j].__flags, 1064 hc_sm_p[j].igu_sb_id, 1065 hc_sm_p[j].igu_seg_id, 1066 hc_sm_p[j].time_to_expire, 1067 hc_sm_p[j].timer_value); 1068 } 1069 1070 /* Indices data */ 1071 for (j = 0; j < loop; j++) { 1072 pr_cont("INDEX[%d] flags (0x%x) timeout (0x%x)\n", j, 1073 hc_index_p[j].flags, 1074 hc_index_p[j].timeout); 1075 } 1076 } 1077 1078#ifdef BNX2X_STOP_ON_ERROR 1079 if (IS_PF(bp)) { 1080 /* event queue */ 1081 BNX2X_ERR("eq cons %x prod %x\n", bp->eq_cons, bp->eq_prod); 1082 for (i = 0; i < NUM_EQ_DESC; i++) { 1083 u32 *data = (u32 *)&bp->eq_ring[i].message.data; 1084 1085 BNX2X_ERR("event queue [%d]: header: opcode %d, error %d\n", 1086 i, bp->eq_ring[i].message.opcode, 1087 bp->eq_ring[i].message.error); 1088 BNX2X_ERR("data: %x %x %x\n", 1089 data[0], data[1], data[2]); 1090 } 1091 } 1092 1093 /* Rings */ 1094 /* Rx */ 1095 for_each_valid_rx_queue(bp, i) { 1096 struct bnx2x_fastpath *fp = &bp->fp[i]; 1097 1098 if (!bp->fp) 1099 break; 1100 1101 if (!fp->rx_cons_sb) 1102 continue; 1103 1104 start = RX_BD(le16_to_cpu(*fp->rx_cons_sb) - 10); 1105 end = RX_BD(le16_to_cpu(*fp->rx_cons_sb) + 503); 1106 for (j = start; j != end; j = RX_BD(j + 1)) { 1107 u32 *rx_bd = (u32 *)&fp->rx_desc_ring[j]; 1108 struct sw_rx_bd *sw_bd = &fp->rx_buf_ring[j]; 1109 1110 BNX2X_ERR("fp%d: rx_bd[%x]=[%x:%x] sw_bd=[%p]\n", 1111 i, j, rx_bd[1], rx_bd[0], sw_bd->data); 1112 } 1113 1114 start = RX_SGE(fp->rx_sge_prod); 1115 end = RX_SGE(fp->last_max_sge); 1116 for (j = start; j != end; j = RX_SGE(j + 1)) { 1117 u32 *rx_sge = (u32 *)&fp->rx_sge_ring[j]; 1118 struct sw_rx_page *sw_page = &fp->rx_page_ring[j]; 1119 1120 BNX2X_ERR("fp%d: rx_sge[%x]=[%x:%x] sw_page=[%p]\n", 1121 i, j, rx_sge[1], rx_sge[0], sw_page->page); 1122 } 1123 1124 start = RCQ_BD(fp->rx_comp_cons - 10); 1125 end = RCQ_BD(fp->rx_comp_cons + 503); 1126 for (j = start; j != end; j = RCQ_BD(j + 1)) { 1127 u32 *cqe = (u32 *)&fp->rx_comp_ring[j]; 1128 1129 BNX2X_ERR("fp%d: cqe[%x]=[%x:%x:%x:%x]\n", 1130 i, j, cqe[0], cqe[1], cqe[2], cqe[3]); 1131 } 1132 } 1133 1134 /* Tx */ 1135 for_each_valid_tx_queue(bp, i) { 1136 struct bnx2x_fastpath *fp = &bp->fp[i]; 1137 1138 if (!bp->fp) 1139 break; 1140 1141 for_each_cos_in_tx_queue(fp, cos) { 1142 struct bnx2x_fp_txdata *txdata = fp->txdata_ptr[cos]; 1143 1144 if (!fp->txdata_ptr[cos]) 1145 break; 1146 1147 if (!txdata->tx_cons_sb) 1148 continue; 1149 1150 start = TX_BD(le16_to_cpu(*txdata->tx_cons_sb) - 10); 1151 end = TX_BD(le16_to_cpu(*txdata->tx_cons_sb) + 245); 1152 for (j = start; j != end; j = TX_BD(j + 1)) { 1153 struct sw_tx_bd *sw_bd = 1154 &txdata->tx_buf_ring[j]; 1155 1156 BNX2X_ERR("fp%d: txdata %d, packet[%x]=[%p,%x]\n", 1157 i, cos, j, sw_bd->skb, 1158 sw_bd->first_bd); 1159 } 1160 1161 start = TX_BD(txdata->tx_bd_cons - 10); 1162 end = TX_BD(txdata->tx_bd_cons + 254); 1163 for (j = start; j != end; j = TX_BD(j + 1)) { 1164 u32 *tx_bd = (u32 *)&txdata->tx_desc_ring[j]; 1165 1166 BNX2X_ERR("fp%d: txdata %d, tx_bd[%x]=[%x:%x:%x:%x]\n", 1167 i, cos, j, tx_bd[0], tx_bd[1], 1168 tx_bd[2], tx_bd[3]); 1169 } 1170 } 1171 } 1172#endif 1173 if (IS_PF(bp)) { 1174 bnx2x_fw_dump(bp); 1175 bnx2x_mc_assert(bp); 1176 } 1177 BNX2X_ERR("end crash dump -----------------\n"); 1178} 1179 1180/* 1181 * FLR Support for E2 1182 * 1183 * bnx2x_pf_flr_clnup() is called during nic_load in the per function HW 1184 * initialization. 1185 */ 1186#define FLR_WAIT_USEC 10000 /* 10 milliseconds */ 1187#define FLR_WAIT_INTERVAL 50 /* usec */ 1188#define FLR_POLL_CNT (FLR_WAIT_USEC/FLR_WAIT_INTERVAL) /* 200 */ 1189 1190struct pbf_pN_buf_regs { 1191 int pN; 1192 u32 init_crd; 1193 u32 crd; 1194 u32 crd_freed; 1195}; 1196 1197struct pbf_pN_cmd_regs { 1198 int pN; 1199 u32 lines_occup; 1200 u32 lines_freed; 1201}; 1202 1203static void bnx2x_pbf_pN_buf_flushed(struct bnx2x *bp, 1204 struct pbf_pN_buf_regs *regs, 1205 u32 poll_count) 1206{ 1207 u32 init_crd, crd, crd_start, crd_freed, crd_freed_start; 1208 u32 cur_cnt = poll_count; 1209 1210 crd_freed = crd_freed_start = REG_RD(bp, regs->crd_freed); 1211 crd = crd_start = REG_RD(bp, regs->crd); 1212 init_crd = REG_RD(bp, regs->init_crd); 1213 1214 DP(BNX2X_MSG_SP, "INIT CREDIT[%d] : %x\n", regs->pN, init_crd); 1215 DP(BNX2X_MSG_SP, "CREDIT[%d] : s:%x\n", regs->pN, crd); 1216 DP(BNX2X_MSG_SP, "CREDIT_FREED[%d]: s:%x\n", regs->pN, crd_freed); 1217 1218 while ((crd != init_crd) && ((u32)SUB_S32(crd_freed, crd_freed_start) < 1219 (init_crd - crd_start))) { 1220 if (cur_cnt--) { 1221 udelay(FLR_WAIT_INTERVAL); 1222 crd = REG_RD(bp, regs->crd); 1223 crd_freed = REG_RD(bp, regs->crd_freed); 1224 } else { 1225 DP(BNX2X_MSG_SP, "PBF tx buffer[%d] timed out\n", 1226 regs->pN); 1227 DP(BNX2X_MSG_SP, "CREDIT[%d] : c:%x\n", 1228 regs->pN, crd); 1229 DP(BNX2X_MSG_SP, "CREDIT_FREED[%d]: c:%x\n", 1230 regs->pN, crd_freed); 1231 break; 1232 } 1233 } 1234 DP(BNX2X_MSG_SP, "Waited %d*%d usec for PBF tx buffer[%d]\n", 1235 poll_count-cur_cnt, FLR_WAIT_INTERVAL, regs->pN); 1236} 1237 1238static void bnx2x_pbf_pN_cmd_flushed(struct bnx2x *bp, 1239 struct pbf_pN_cmd_regs *regs, 1240 u32 poll_count) 1241{ 1242 u32 occup, to_free, freed, freed_start; 1243 u32 cur_cnt = poll_count; 1244 1245 occup = to_free = REG_RD(bp, regs->lines_occup); 1246 freed = freed_start = REG_RD(bp, regs->lines_freed); 1247 1248 DP(BNX2X_MSG_SP, "OCCUPANCY[%d] : s:%x\n", regs->pN, occup); 1249 DP(BNX2X_MSG_SP, "LINES_FREED[%d] : s:%x\n", regs->pN, freed); 1250 1251 while (occup && ((u32)SUB_S32(freed, freed_start) < to_free)) { 1252 if (cur_cnt--) { 1253 udelay(FLR_WAIT_INTERVAL); 1254 occup = REG_RD(bp, regs->lines_occup); 1255 freed = REG_RD(bp, regs->lines_freed); 1256 } else { 1257 DP(BNX2X_MSG_SP, "PBF cmd queue[%d] timed out\n", 1258 regs->pN); 1259 DP(BNX2X_MSG_SP, "OCCUPANCY[%d] : s:%x\n", 1260 regs->pN, occup); 1261 DP(BNX2X_MSG_SP, "LINES_FREED[%d] : s:%x\n", 1262 regs->pN, freed); 1263 break; 1264 } 1265 } 1266 DP(BNX2X_MSG_SP, "Waited %d*%d usec for PBF cmd queue[%d]\n", 1267 poll_count-cur_cnt, FLR_WAIT_INTERVAL, regs->pN); 1268} 1269 1270static u32 bnx2x_flr_clnup_reg_poll(struct bnx2x *bp, u32 reg, 1271 u32 expected, u32 poll_count) 1272{ 1273 u32 cur_cnt = poll_count; 1274 u32 val; 1275 1276 while ((val = REG_RD(bp, reg)) != expected && cur_cnt--) 1277 udelay(FLR_WAIT_INTERVAL); 1278 1279 return val; 1280} 1281 1282int bnx2x_flr_clnup_poll_hw_counter(struct bnx2x *bp, u32 reg, 1283 char *msg, u32 poll_cnt) 1284{ 1285 u32 val = bnx2x_flr_clnup_reg_poll(bp, reg, 0, poll_cnt); 1286 if (val != 0) { 1287 BNX2X_ERR("%s usage count=%d\n", msg, val); 1288 return 1; 1289 } 1290 return 0; 1291} 1292 1293/* Common routines with VF FLR cleanup */ 1294u32 bnx2x_flr_clnup_poll_count(struct bnx2x *bp) 1295{ 1296 /* adjust polling timeout */ 1297 if (CHIP_REV_IS_EMUL(bp)) 1298 return FLR_POLL_CNT * 2000; 1299 1300 if (CHIP_REV_IS_FPGA(bp)) 1301 return FLR_POLL_CNT * 120; 1302 1303 return FLR_POLL_CNT; 1304} 1305 1306void bnx2x_tx_hw_flushed(struct bnx2x *bp, u32 poll_count) 1307{ 1308 struct pbf_pN_cmd_regs cmd_regs[] = { 1309 {0, (CHIP_IS_E3B0(bp)) ? 1310 PBF_REG_TQ_OCCUPANCY_Q0 : 1311 PBF_REG_P0_TQ_OCCUPANCY, 1312 (CHIP_IS_E3B0(bp)) ? 1313 PBF_REG_TQ_LINES_FREED_CNT_Q0 : 1314 PBF_REG_P0_TQ_LINES_FREED_CNT}, 1315 {1, (CHIP_IS_E3B0(bp)) ? 1316 PBF_REG_TQ_OCCUPANCY_Q1 : 1317 PBF_REG_P1_TQ_OCCUPANCY, 1318 (CHIP_IS_E3B0(bp)) ? 1319 PBF_REG_TQ_LINES_FREED_CNT_Q1 : 1320 PBF_REG_P1_TQ_LINES_FREED_CNT}, 1321 {4, (CHIP_IS_E3B0(bp)) ? 1322 PBF_REG_TQ_OCCUPANCY_LB_Q : 1323 PBF_REG_P4_TQ_OCCUPANCY, 1324 (CHIP_IS_E3B0(bp)) ? 1325 PBF_REG_TQ_LINES_FREED_CNT_LB_Q : 1326 PBF_REG_P4_TQ_LINES_FREED_CNT} 1327 }; 1328 1329 struct pbf_pN_buf_regs buf_regs[] = { 1330 {0, (CHIP_IS_E3B0(bp)) ? 1331 PBF_REG_INIT_CRD_Q0 : 1332 PBF_REG_P0_INIT_CRD , 1333 (CHIP_IS_E3B0(bp)) ? 1334 PBF_REG_CREDIT_Q0 : 1335 PBF_REG_P0_CREDIT, 1336 (CHIP_IS_E3B0(bp)) ? 1337 PBF_REG_INTERNAL_CRD_FREED_CNT_Q0 : 1338 PBF_REG_P0_INTERNAL_CRD_FREED_CNT}, 1339 {1, (CHIP_IS_E3B0(bp)) ? 1340 PBF_REG_INIT_CRD_Q1 : 1341 PBF_REG_P1_INIT_CRD, 1342 (CHIP_IS_E3B0(bp)) ? 1343 PBF_REG_CREDIT_Q1 : 1344 PBF_REG_P1_CREDIT, 1345 (CHIP_IS_E3B0(bp)) ? 1346 PBF_REG_INTERNAL_CRD_FREED_CNT_Q1 : 1347 PBF_REG_P1_INTERNAL_CRD_FREED_CNT}, 1348 {4, (CHIP_IS_E3B0(bp)) ? 1349 PBF_REG_INIT_CRD_LB_Q : 1350 PBF_REG_P4_INIT_CRD, 1351 (CHIP_IS_E3B0(bp)) ? 1352 PBF_REG_CREDIT_LB_Q : 1353 PBF_REG_P4_CREDIT, 1354 (CHIP_IS_E3B0(bp)) ? 1355 PBF_REG_INTERNAL_CRD_FREED_CNT_LB_Q : 1356 PBF_REG_P4_INTERNAL_CRD_FREED_CNT}, 1357 }; 1358 1359 int i; 1360 1361 /* Verify the command queues are flushed P0, P1, P4 */ 1362 for (i = 0; i < ARRAY_SIZE(cmd_regs); i++) 1363 bnx2x_pbf_pN_cmd_flushed(bp, &cmd_regs[i], poll_count); 1364 1365 /* Verify the transmission buffers are flushed P0, P1, P4 */ 1366 for (i = 0; i < ARRAY_SIZE(buf_regs); i++) 1367 bnx2x_pbf_pN_buf_flushed(bp, &buf_regs[i], poll_count); 1368} 1369 1370#define OP_GEN_PARAM(param) \ 1371 (((param) << SDM_OP_GEN_COMP_PARAM_SHIFT) & SDM_OP_GEN_COMP_PARAM) 1372 1373#define OP_GEN_TYPE(type) \ 1374 (((type) << SDM_OP_GEN_COMP_TYPE_SHIFT) & SDM_OP_GEN_COMP_TYPE) 1375 1376#define OP_GEN_AGG_VECT(index) \ 1377 (((index) << SDM_OP_GEN_AGG_VECT_IDX_SHIFT) & SDM_OP_GEN_AGG_VECT_IDX) 1378 1379int bnx2x_send_final_clnup(struct bnx2x *bp, u8 clnup_func, u32 poll_cnt) 1380{ 1381 u32 op_gen_command = 0; 1382 u32 comp_addr = BAR_CSTRORM_INTMEM + 1383 CSTORM_FINAL_CLEANUP_COMPLETE_OFFSET(clnup_func); 1384 int ret = 0; 1385 1386 if (REG_RD(bp, comp_addr)) { 1387 BNX2X_ERR("Cleanup complete was not 0 before sending\n"); 1388 return 1; 1389 } 1390 1391 op_gen_command |= OP_GEN_PARAM(XSTORM_AGG_INT_FINAL_CLEANUP_INDEX); 1392 op_gen_command |= OP_GEN_TYPE(XSTORM_AGG_INT_FINAL_CLEANUP_COMP_TYPE); 1393 op_gen_command |= OP_GEN_AGG_VECT(clnup_func); 1394 op_gen_command |= 1 << SDM_OP_GEN_AGG_VECT_IDX_VALID_SHIFT; 1395 1396 DP(BNX2X_MSG_SP, "sending FW Final cleanup\n"); 1397 REG_WR(bp, XSDM_REG_OPERATION_GEN, op_gen_command); 1398 1399 if (bnx2x_flr_clnup_reg_poll(bp, comp_addr, 1, poll_cnt) != 1) { 1400 BNX2X_ERR("FW final cleanup did not succeed\n"); 1401 DP(BNX2X_MSG_SP, "At timeout completion address contained %x\n", 1402 (REG_RD(bp, comp_addr))); 1403 bnx2x_panic(); 1404 return 1; 1405 } 1406 /* Zero completion for next FLR */ 1407 REG_WR(bp, comp_addr, 0); 1408 1409 return ret; 1410} 1411 1412u8 bnx2x_is_pcie_pending(struct pci_dev *dev) 1413{ 1414 u16 status; 1415 1416 pcie_capability_read_word(dev, PCI_EXP_DEVSTA, &status); 1417 return status & PCI_EXP_DEVSTA_TRPND; 1418} 1419 1420/* PF FLR specific routines 1421*/ 1422static int bnx2x_poll_hw_usage_counters(struct bnx2x *bp, u32 poll_cnt) 1423{ 1424 /* wait for CFC PF usage-counter to zero (includes all the VFs) */ 1425 if (bnx2x_flr_clnup_poll_hw_counter(bp, 1426 CFC_REG_NUM_LCIDS_INSIDE_PF, 1427 "CFC PF usage counter timed out", 1428 poll_cnt)) 1429 return 1; 1430 1431 /* Wait for DQ PF usage-counter to zero (until DQ cleanup) */ 1432 if (bnx2x_flr_clnup_poll_hw_counter(bp, 1433 DORQ_REG_PF_USAGE_CNT, 1434 "DQ PF usage counter timed out", 1435 poll_cnt)) 1436 return 1; 1437 1438 /* Wait for QM PF usage-counter to zero (until DQ cleanup) */ 1439 if (bnx2x_flr_clnup_poll_hw_counter(bp, 1440 QM_REG_PF_USG_CNT_0 + 4*BP_FUNC(bp), 1441 "QM PF usage counter timed out", 1442 poll_cnt)) 1443 return 1; 1444 1445 /* Wait for Timer PF usage-counters to zero (until DQ cleanup) */ 1446 if (bnx2x_flr_clnup_poll_hw_counter(bp, 1447 TM_REG_LIN0_VNIC_UC + 4*BP_PORT(bp), 1448 "Timers VNIC usage counter timed out", 1449 poll_cnt)) 1450 return 1; 1451 if (bnx2x_flr_clnup_poll_hw_counter(bp, 1452 TM_REG_LIN0_NUM_SCANS + 4*BP_PORT(bp), 1453 "Timers NUM_SCANS usage counter timed out", 1454 poll_cnt)) 1455 return 1; 1456 1457 /* Wait DMAE PF usage counter to zero */ 1458 if (bnx2x_flr_clnup_poll_hw_counter(bp, 1459 dmae_reg_go_c[INIT_DMAE_C(bp)], 1460 "DMAE command register timed out", 1461 poll_cnt)) 1462 return 1; 1463 1464 return 0; 1465} 1466 1467static void bnx2x_hw_enable_status(struct bnx2x *bp) 1468{ 1469 u32 val; 1470 1471 val = REG_RD(bp, CFC_REG_WEAK_ENABLE_PF); 1472 DP(BNX2X_MSG_SP, "CFC_REG_WEAK_ENABLE_PF is 0x%x\n", val); 1473 1474 val = REG_RD(bp, PBF_REG_DISABLE_PF); 1475 DP(BNX2X_MSG_SP, "PBF_REG_DISABLE_PF is 0x%x\n", val); 1476 1477 val = REG_RD(bp, IGU_REG_PCI_PF_MSI_EN); 1478 DP(BNX2X_MSG_SP, "IGU_REG_PCI_PF_MSI_EN is 0x%x\n", val); 1479 1480 val = REG_RD(bp, IGU_REG_PCI_PF_MSIX_EN); 1481 DP(BNX2X_MSG_SP, "IGU_REG_PCI_PF_MSIX_EN is 0x%x\n", val); 1482 1483 val = REG_RD(bp, IGU_REG_PCI_PF_MSIX_FUNC_MASK); 1484 DP(BNX2X_MSG_SP, "IGU_REG_PCI_PF_MSIX_FUNC_MASK is 0x%x\n", val); 1485 1486 val = REG_RD(bp, PGLUE_B_REG_SHADOW_BME_PF_7_0_CLR); 1487 DP(BNX2X_MSG_SP, "PGLUE_B_REG_SHADOW_BME_PF_7_0_CLR is 0x%x\n", val); 1488 1489 val = REG_RD(bp, PGLUE_B_REG_FLR_REQUEST_PF_7_0_CLR); 1490 DP(BNX2X_MSG_SP, "PGLUE_B_REG_FLR_REQUEST_PF_7_0_CLR is 0x%x\n", val); 1491 1492 val = REG_RD(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER); 1493 DP(BNX2X_MSG_SP, "PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER is 0x%x\n", 1494 val); 1495} 1496 1497static int bnx2x_pf_flr_clnup(struct bnx2x *bp) 1498{ 1499 u32 poll_cnt = bnx2x_flr_clnup_poll_count(bp); 1500 1501 DP(BNX2X_MSG_SP, "Cleanup after FLR PF[%d]\n", BP_ABS_FUNC(bp)); 1502 1503 /* Re-enable PF target read access */ 1504 REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ, 1); 1505 1506 /* Poll HW usage counters */ 1507 DP(BNX2X_MSG_SP, "Polling usage counters\n"); 1508 if (bnx2x_poll_hw_usage_counters(bp, poll_cnt)) 1509 return -EBUSY; 1510 1511 /* Zero the igu 'trailing edge' and 'leading edge' */ 1512 1513 /* Send the FW cleanup command */ 1514 if (bnx2x_send_final_clnup(bp, (u8)BP_FUNC(bp), poll_cnt)) 1515 return -EBUSY; 1516 1517 /* ATC cleanup */ 1518 1519 /* Verify TX hw is flushed */ 1520 bnx2x_tx_hw_flushed(bp, poll_cnt); 1521 1522 /* Wait 100ms (not adjusted according to platform) */ 1523 msleep(100); 1524 1525 /* Verify no pending pci transactions */ 1526 if (bnx2x_is_pcie_pending(bp->pdev)) 1527 BNX2X_ERR("PCIE Transactions still pending\n"); 1528 1529 /* Debug */ 1530 bnx2x_hw_enable_status(bp); 1531 1532 /* 1533 * Master enable - Due to WB DMAE writes performed before this 1534 * register is re-initialized as part of the regular function init 1535 */ 1536 REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 1); 1537 1538 return 0; 1539} 1540 1541static void bnx2x_hc_int_enable(struct bnx2x *bp) 1542{ 1543 int port = BP_PORT(bp); 1544 u32 addr = port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0; 1545 u32 val = REG_RD(bp, addr); 1546 bool msix = (bp->flags & USING_MSIX_FLAG) ? true : false; 1547 bool single_msix = (bp->flags & USING_SINGLE_MSIX_FLAG) ? true : false; 1548 bool msi = (bp->flags & USING_MSI_FLAG) ? true : false; 1549 1550 if (msix) { 1551 val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 | 1552 HC_CONFIG_0_REG_INT_LINE_EN_0); 1553 val |= (HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 | 1554 HC_CONFIG_0_REG_ATTN_BIT_EN_0); 1555 if (single_msix) 1556 val |= HC_CONFIG_0_REG_SINGLE_ISR_EN_0; 1557 } else if (msi) { 1558 val &= ~HC_CONFIG_0_REG_INT_LINE_EN_0; 1559 val |= (HC_CONFIG_0_REG_SINGLE_ISR_EN_0 | 1560 HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 | 1561 HC_CONFIG_0_REG_ATTN_BIT_EN_0); 1562 } else { 1563 val |= (HC_CONFIG_0_REG_SINGLE_ISR_EN_0 | 1564 HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 | 1565 HC_CONFIG_0_REG_INT_LINE_EN_0 | 1566 HC_CONFIG_0_REG_ATTN_BIT_EN_0); 1567 1568 if (!CHIP_IS_E1(bp)) { 1569 DP(NETIF_MSG_IFUP, 1570 "write %x to HC %d (addr 0x%x)\n", val, port, addr); 1571 1572 REG_WR(bp, addr, val); 1573 1574 val &= ~HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0; 1575 } 1576 } 1577 1578 if (CHIP_IS_E1(bp)) 1579 REG_WR(bp, HC_REG_INT_MASK + port*4, 0x1FFFF); 1580 1581 DP(NETIF_MSG_IFUP, 1582 "write %x to HC %d (addr 0x%x) mode %s\n", val, port, addr, 1583 (msix ? "MSI-X" : (msi ? "MSI" : "INTx"))); 1584 1585 REG_WR(bp, addr, val); 1586 /* 1587 * Ensure that HC_CONFIG is written before leading/trailing edge config 1588 */ 1589 mmiowb(); 1590 barrier(); 1591 1592 if (!CHIP_IS_E1(bp)) { 1593 /* init leading/trailing edge */ 1594 if (IS_MF(bp)) { 1595 val = (0xee0f | (1 << (BP_VN(bp) + 4))); 1596 if (bp->port.pmf) 1597 /* enable nig and gpio3 attention */ 1598 val |= 0x1100; 1599 } else 1600 val = 0xffff; 1601 1602 REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, val); 1603 REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, val); 1604 } 1605 1606 /* Make sure that interrupts are indeed enabled from here on */ 1607 mmiowb(); 1608} 1609 1610static void bnx2x_igu_int_enable(struct bnx2x *bp) 1611{ 1612 u32 val; 1613 bool msix = (bp->flags & USING_MSIX_FLAG) ? true : false; 1614 bool single_msix = (bp->flags & USING_SINGLE_MSIX_FLAG) ? true : false; 1615 bool msi = (bp->flags & USING_MSI_FLAG) ? true : false; 1616 1617 val = REG_RD(bp, IGU_REG_PF_CONFIGURATION); 1618 1619 if (msix) { 1620 val &= ~(IGU_PF_CONF_INT_LINE_EN | 1621 IGU_PF_CONF_SINGLE_ISR_EN); 1622 val |= (IGU_PF_CONF_MSI_MSIX_EN | 1623 IGU_PF_CONF_ATTN_BIT_EN); 1624 1625 if (single_msix) 1626 val |= IGU_PF_CONF_SINGLE_ISR_EN; 1627 } else if (msi) { 1628 val &= ~IGU_PF_CONF_INT_LINE_EN; 1629 val |= (IGU_PF_CONF_MSI_MSIX_EN | 1630 IGU_PF_CONF_ATTN_BIT_EN | 1631 IGU_PF_CONF_SINGLE_ISR_EN); 1632 } else { 1633 val &= ~IGU_PF_CONF_MSI_MSIX_EN; 1634 val |= (IGU_PF_CONF_INT_LINE_EN | 1635 IGU_PF_CONF_ATTN_BIT_EN | 1636 IGU_PF_CONF_SINGLE_ISR_EN); 1637 } 1638 1639 /* Clean previous status - need to configure igu prior to ack*/ 1640 if ((!msix) || single_msix) { 1641 REG_WR(bp, IGU_REG_PF_CONFIGURATION, val); 1642 bnx2x_ack_int(bp); 1643 } 1644 1645 val |= IGU_PF_CONF_FUNC_EN; 1646 1647 DP(NETIF_MSG_IFUP, "write 0x%x to IGU mode %s\n", 1648 val, (msix ? "MSI-X" : (msi ? "MSI" : "INTx"))); 1649 1650 REG_WR(bp, IGU_REG_PF_CONFIGURATION, val); 1651 1652 if (val & IGU_PF_CONF_INT_LINE_EN) 1653 pci_intx(bp->pdev, true); 1654 1655 barrier(); 1656 1657 /* init leading/trailing edge */ 1658 if (IS_MF(bp)) { 1659 val = (0xee0f | (1 << (BP_VN(bp) + 4))); 1660 if (bp->port.pmf) 1661 /* enable nig and gpio3 attention */ 1662 val |= 0x1100; 1663 } else 1664 val = 0xffff; 1665 1666 REG_WR(bp, IGU_REG_TRAILING_EDGE_LATCH, val); 1667 REG_WR(bp, IGU_REG_LEADING_EDGE_LATCH, val); 1668 1669 /* Make sure that interrupts are indeed enabled from here on */ 1670 mmiowb(); 1671} 1672 1673void bnx2x_int_enable(struct bnx2x *bp) 1674{ 1675 if (bp->common.int_block == INT_BLOCK_HC) 1676 bnx2x_hc_int_enable(bp); 1677 else 1678 bnx2x_igu_int_enable(bp); 1679} 1680 1681void bnx2x_int_disable_sync(struct bnx2x *bp, int disable_hw) 1682{ 1683 int msix = (bp->flags & USING_MSIX_FLAG) ? 1 : 0; 1684 int i, offset; 1685 1686 if (disable_hw) 1687 /* prevent the HW from sending interrupts */ 1688 bnx2x_int_disable(bp); 1689 1690 /* make sure all ISRs are done */ 1691 if (msix) { 1692 synchronize_irq(bp->msix_table[0].vector); 1693 offset = 1; 1694 if (CNIC_SUPPORT(bp)) 1695 offset++; 1696 for_each_eth_queue(bp, i) 1697 synchronize_irq(bp->msix_table[offset++].vector); 1698 } else 1699 synchronize_irq(bp->pdev->irq); 1700 1701 /* make sure sp_task is not running */ 1702 cancel_delayed_work(&bp->sp_task); 1703 cancel_delayed_work(&bp->period_task); 1704 flush_workqueue(bnx2x_wq); 1705} 1706 1707/* fast path */ 1708 1709/* 1710 * General service functions 1711 */ 1712 1713/* Return true if succeeded to acquire the lock */ 1714static bool bnx2x_trylock_hw_lock(struct bnx2x *bp, u32 resource) 1715{ 1716 u32 lock_status; 1717 u32 resource_bit = (1 << resource); 1718 int func = BP_FUNC(bp); 1719 u32 hw_lock_control_reg; 1720 1721 DP(NETIF_MSG_HW | NETIF_MSG_IFUP, 1722 "Trying to take a lock on resource %d\n", resource); 1723 1724 /* Validating that the resource is within range */ 1725 if (resource > HW_LOCK_MAX_RESOURCE_VALUE) { 1726 DP(NETIF_MSG_HW | NETIF_MSG_IFUP, 1727 "resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n", 1728 resource, HW_LOCK_MAX_RESOURCE_VALUE); 1729 return false; 1730 } 1731 1732 if (func <= 5) 1733 hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + func*8); 1734 else 1735 hw_lock_control_reg = 1736 (MISC_REG_DRIVER_CONTROL_7 + (func - 6)*8); 1737 1738 /* Try to acquire the lock */ 1739 REG_WR(bp, hw_lock_control_reg + 4, resource_bit); 1740 lock_status = REG_RD(bp, hw_lock_control_reg); 1741 if (lock_status & resource_bit) 1742 return true; 1743 1744 DP(NETIF_MSG_HW | NETIF_MSG_IFUP, 1745 "Failed to get a lock on resource %d\n", resource); 1746 return false; 1747} 1748 1749/** 1750 * bnx2x_get_leader_lock_resource - get the recovery leader resource id 1751 * 1752 * @bp: driver handle 1753 * 1754 * Returns the recovery leader resource id according to the engine this function 1755 * belongs to. Currently only only 2 engines is supported. 1756 */ 1757static int bnx2x_get_leader_lock_resource(struct bnx2x *bp) 1758{ 1759 if (BP_PATH(bp)) 1760 return HW_LOCK_RESOURCE_RECOVERY_LEADER_1; 1761 else 1762 return HW_LOCK_RESOURCE_RECOVERY_LEADER_0; 1763} 1764 1765/** 1766 * bnx2x_trylock_leader_lock- try to acquire a leader lock. 1767 * 1768 * @bp: driver handle 1769 * 1770 * Tries to acquire a leader lock for current engine. 1771 */ 1772static bool bnx2x_trylock_leader_lock(struct bnx2x *bp) 1773{ 1774 return bnx2x_trylock_hw_lock(bp, bnx2x_get_leader_lock_resource(bp)); 1775} 1776 1777static void bnx2x_cnic_cfc_comp(struct bnx2x *bp, int cid, u8 err); 1778 1779/* schedule the sp task and mark that interrupt occurred (runs from ISR) */ 1780static int bnx2x_schedule_sp_task(struct bnx2x *bp) 1781{ 1782 /* Set the interrupt occurred bit for the sp-task to recognize it 1783 * must ack the interrupt and transition according to the IGU 1784 * state machine. 1785 */ 1786 atomic_set(&bp->interrupt_occurred, 1); 1787 1788 /* The sp_task must execute only after this bit 1789 * is set, otherwise we will get out of sync and miss all 1790 * further interrupts. Hence, the barrier. 1791 */ 1792 smp_wmb(); 1793 1794 /* schedule sp_task to workqueue */ 1795 return queue_delayed_work(bnx2x_wq, &bp->sp_task, 0); 1796} 1797 1798void bnx2x_sp_event(struct bnx2x_fastpath *fp, union eth_rx_cqe *rr_cqe) 1799{ 1800 struct bnx2x *bp = fp->bp; 1801 int cid = SW_CID(rr_cqe->ramrod_cqe.conn_and_cmd_data); 1802 int command = CQE_CMD(rr_cqe->ramrod_cqe.conn_and_cmd_data); 1803 enum bnx2x_queue_cmd drv_cmd = BNX2X_Q_CMD_MAX; 1804 struct bnx2x_queue_sp_obj *q_obj = &bnx2x_sp_obj(bp, fp).q_obj; 1805 1806 DP(BNX2X_MSG_SP, 1807 "fp %d cid %d got ramrod #%d state is %x type is %d\n", 1808 fp->index, cid, command, bp->state, 1809 rr_cqe->ramrod_cqe.ramrod_type); 1810 1811 /* If cid is within VF range, replace the slowpath object with the 1812 * one corresponding to this VF 1813 */ 1814 if (cid >= BNX2X_FIRST_VF_CID && 1815 cid < BNX2X_FIRST_VF_CID + BNX2X_VF_CIDS) 1816 bnx2x_iov_set_queue_sp_obj(bp, cid, &q_obj); 1817 1818 switch (command) { 1819 case (RAMROD_CMD_ID_ETH_CLIENT_UPDATE): 1820 DP(BNX2X_MSG_SP, "got UPDATE ramrod. CID %d\n", cid); 1821 drv_cmd = BNX2X_Q_CMD_UPDATE; 1822 break; 1823 1824 case (RAMROD_CMD_ID_ETH_CLIENT_SETUP): 1825 DP(BNX2X_MSG_SP, "got MULTI[%d] setup ramrod\n", cid); 1826 drv_cmd = BNX2X_Q_CMD_SETUP; 1827 break; 1828 1829 case (RAMROD_CMD_ID_ETH_TX_QUEUE_SETUP): 1830 DP(BNX2X_MSG_SP, "got MULTI[%d] tx-only setup ramrod\n", cid); 1831 drv_cmd = BNX2X_Q_CMD_SETUP_TX_ONLY; 1832 break; 1833 1834 case (RAMROD_CMD_ID_ETH_HALT): 1835 DP(BNX2X_MSG_SP, "got MULTI[%d] halt ramrod\n", cid); 1836 drv_cmd = BNX2X_Q_CMD_HALT; 1837 break; 1838 1839 case (RAMROD_CMD_ID_ETH_TERMINATE): 1840 DP(BNX2X_MSG_SP, "got MULTI[%d] terminate ramrod\n", cid); 1841 drv_cmd = BNX2X_Q_CMD_TERMINATE; 1842 break; 1843 1844 case (RAMROD_CMD_ID_ETH_EMPTY): 1845 DP(BNX2X_MSG_SP, "got MULTI[%d] empty ramrod\n", cid); 1846 drv_cmd = BNX2X_Q_CMD_EMPTY; 1847 break; 1848 1849 case (RAMROD_CMD_ID_ETH_TPA_UPDATE): 1850 DP(BNX2X_MSG_SP, "got tpa update ramrod CID=%d\n", cid); 1851 drv_cmd = BNX2X_Q_CMD_UPDATE_TPA; 1852 break; 1853 1854 default: 1855 BNX2X_ERR("unexpected MC reply (%d) on fp[%d]\n", 1856 command, fp->index); 1857 return; 1858 } 1859 1860 if ((drv_cmd != BNX2X_Q_CMD_MAX) && 1861 q_obj->complete_cmd(bp, q_obj, drv_cmd)) 1862 /* q_obj->complete_cmd() failure means that this was 1863 * an unexpected completion. 1864 * 1865 * In this case we don't want to increase the bp->spq_left 1866 * because apparently we haven't sent this command the first 1867 * place. 1868 */ 1869#ifdef BNX2X_STOP_ON_ERROR 1870 bnx2x_panic(); 1871#else 1872 return; 1873#endif 1874 1875 smp_mb__before_atomic(); 1876 atomic_inc(&bp->cq_spq_left); 1877 /* push the change in bp->spq_left and towards the memory */ 1878 smp_mb__after_atomic(); 1879 1880 DP(BNX2X_MSG_SP, "bp->cq_spq_left %x\n", atomic_read(&bp->cq_spq_left)); 1881 1882 if ((drv_cmd == BNX2X_Q_CMD_UPDATE) && (IS_FCOE_FP(fp)) && 1883 (!!test_bit(BNX2X_AFEX_FCOE_Q_UPDATE_PENDING, &bp->sp_state))) { 1884 /* if Q update ramrod is completed for last Q in AFEX vif set 1885 * flow, then ACK MCP at the end 1886 * 1887 * mark pending ACK to MCP bit. 1888 * prevent case that both bits are cleared. 1889 * At the end of load/unload driver checks that 1890 * sp_state is cleared, and this order prevents 1891 * races 1892 */ 1893 smp_mb__before_atomic(); 1894 set_bit(BNX2X_AFEX_PENDING_VIFSET_MCP_ACK, &bp->sp_state); 1895 wmb(); 1896 clear_bit(BNX2X_AFEX_FCOE_Q_UPDATE_PENDING, &bp->sp_state); 1897 smp_mb__after_atomic(); 1898 1899 /* schedule the sp task as mcp ack is required */ 1900 bnx2x_schedule_sp_task(bp); 1901 } 1902 1903 return; 1904} 1905 1906irqreturn_t bnx2x_interrupt(int irq, void *dev_instance) 1907{ 1908 struct bnx2x *bp = netdev_priv(dev_instance); 1909 u16 status = bnx2x_ack_int(bp); 1910 u16 mask; 1911 int i; 1912 u8 cos; 1913 1914 /* Return here if interrupt is shared and it's not for us */ 1915 if (unlikely(status == 0)) { 1916 DP(NETIF_MSG_INTR, "not our interrupt!\n"); 1917 return IRQ_NONE; 1918 } 1919 DP(NETIF_MSG_INTR, "got an interrupt status 0x%x\n", status); 1920 1921#ifdef BNX2X_STOP_ON_ERROR 1922 if (unlikely(bp->panic)) 1923 return IRQ_HANDLED; 1924#endif 1925 1926 for_each_eth_queue(bp, i) { 1927 struct bnx2x_fastpath *fp = &bp->fp[i]; 1928 1929 mask = 0x2 << (fp->index + CNIC_SUPPORT(bp)); 1930 if (status & mask) { 1931 /* Handle Rx or Tx according to SB id */ 1932 for_each_cos_in_tx_queue(fp, cos) 1933 prefetch(fp->txdata_ptr[cos]->tx_cons_sb); 1934 prefetch(&fp->sb_running_index[SM_RX_ID]); 1935 napi_schedule_irqoff(&bnx2x_fp(bp, fp->index, napi)); 1936 status &= ~mask; 1937 } 1938 } 1939 1940 if (CNIC_SUPPORT(bp)) { 1941 mask = 0x2; 1942 if (status & (mask | 0x1)) { 1943 struct cnic_ops *c_ops = NULL; 1944 1945 rcu_read_lock(); 1946 c_ops = rcu_dereference(bp->cnic_ops); 1947 if (c_ops && (bp->cnic_eth_dev.drv_state & 1948 CNIC_DRV_STATE_HANDLES_IRQ)) 1949 c_ops->cnic_handler(bp->cnic_data, NULL); 1950 rcu_read_unlock(); 1951 1952 status &= ~mask; 1953 } 1954 } 1955 1956 if (unlikely(status & 0x1)) { 1957 1958 /* schedule sp task to perform default status block work, ack 1959 * attentions and enable interrupts. 1960 */ 1961 bnx2x_schedule_sp_task(bp); 1962 1963 status &= ~0x1; 1964 if (!status) 1965 return IRQ_HANDLED; 1966 } 1967 1968 if (unlikely(status)) 1969 DP(NETIF_MSG_INTR, "got an unknown interrupt! (status 0x%x)\n", 1970 status); 1971 1972 return IRQ_HANDLED; 1973} 1974 1975/* Link */ 1976 1977/* 1978 * General service functions 1979 */ 1980 1981int bnx2x_acquire_hw_lock(struct bnx2x *bp, u32 resource) 1982{ 1983 u32 lock_status; 1984 u32 resource_bit = (1 << resource); 1985 int func = BP_FUNC(bp); 1986 u32 hw_lock_control_reg; 1987 int cnt; 1988 1989 /* Validating that the resource is within range */ 1990 if (resource > HW_LOCK_MAX_RESOURCE_VALUE) { 1991 BNX2X_ERR("resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n", 1992 resource, HW_LOCK_MAX_RESOURCE_VALUE); 1993 return -EINVAL; 1994 } 1995 1996 if (func <= 5) { 1997 hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + func*8); 1998 } else { 1999 hw_lock_control_reg = 2000 (MISC_REG_DRIVER_CONTROL_7 + (func - 6)*8); 2001 } 2002 2003 /* Validating that the resource is not already taken */ 2004 lock_status = REG_RD(bp, hw_lock_control_reg); 2005 if (lock_status & resource_bit) { 2006 BNX2X_ERR("lock_status 0x%x resource_bit 0x%x\n", 2007 lock_status, resource_bit); 2008 return -EEXIST; 2009 } 2010 2011 /* Try for 5 second every 5ms */ 2012 for (cnt = 0; cnt < 1000; cnt++) { 2013 /* Try to acquire the lock */ 2014 REG_WR(bp, hw_lock_control_reg + 4, resource_bit); 2015 lock_status = REG_RD(bp, hw_lock_control_reg); 2016 if (lock_status & resource_bit) 2017 return 0; 2018 2019 usleep_range(5000, 10000); 2020 } 2021 BNX2X_ERR("Timeout\n"); 2022 return -EAGAIN; 2023} 2024 2025int bnx2x_release_leader_lock(struct bnx2x *bp) 2026{ 2027 return bnx2x_release_hw_lock(bp, bnx2x_get_leader_lock_resource(bp)); 2028} 2029 2030int bnx2x_release_hw_lock(struct bnx2x *bp, u32 resource) 2031{ 2032 u32 lock_status; 2033 u32 resource_bit = (1 << resource); 2034 int func = BP_FUNC(bp); 2035 u32 hw_lock_control_reg; 2036 2037 /* Validating that the resource is within range */ 2038 if (resource > HW_LOCK_MAX_RESOURCE_VALUE) { 2039 BNX2X_ERR("resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n", 2040 resource, HW_LOCK_MAX_RESOURCE_VALUE); 2041 return -EINVAL; 2042 } 2043 2044 if (func <= 5) { 2045 hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + func*8); 2046 } else { 2047 hw_lock_control_reg = 2048 (MISC_REG_DRIVER_CONTROL_7 + (func - 6)*8); 2049 } 2050 2051 /* Validating that the resource is currently taken */ 2052 lock_status = REG_RD(bp, hw_lock_control_reg); 2053 if (!(lock_status & resource_bit)) { 2054 BNX2X_ERR("lock_status 0x%x resource_bit 0x%x. Unlock was called but lock wasn't taken!\n", 2055 lock_status, resource_bit); 2056 return -EFAULT; 2057 } 2058 2059 REG_WR(bp, hw_lock_control_reg, resource_bit); 2060 return 0; 2061} 2062 2063int bnx2x_get_gpio(struct bnx2x *bp, int gpio_num, u8 port) 2064{ 2065 /* The GPIO should be swapped if swap register is set and active */ 2066 int gpio_port = (REG_RD(bp, NIG_REG_PORT_SWAP) && 2067 REG_RD(bp, NIG_REG_STRAP_OVERRIDE)) ^ port; 2068 int gpio_shift = gpio_num + 2069 (gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0); 2070 u32 gpio_mask = (1 << gpio_shift); 2071 u32 gpio_reg; 2072 int value; 2073 2074 if (gpio_num > MISC_REGISTERS_GPIO_3) { 2075 BNX2X_ERR("Invalid GPIO %d\n", gpio_num); 2076 return -EINVAL; 2077 } 2078 2079 /* read GPIO value */ 2080 gpio_reg = REG_RD(bp, MISC_REG_GPIO); 2081 2082 /* get the requested pin value */ 2083 if ((gpio_reg & gpio_mask) == gpio_mask) 2084 value = 1; 2085 else 2086 value = 0; 2087 2088 return value; 2089} 2090 2091int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode, u8 port) 2092{ 2093 /* The GPIO should be swapped if swap register is set and active */ 2094 int gpio_port = (REG_RD(bp, NIG_REG_PORT_SWAP) && 2095 REG_RD(bp, NIG_REG_STRAP_OVERRIDE)) ^ port; 2096 int gpio_shift = gpio_num + 2097 (gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0); 2098 u32 gpio_mask = (1 << gpio_shift); 2099 u32 gpio_reg; 2100 2101 if (gpio_num > MISC_REGISTERS_GPIO_3) { 2102 BNX2X_ERR("Invalid GPIO %d\n", gpio_num); 2103 return -EINVAL; 2104 } 2105 2106 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_GPIO); 2107 /* read GPIO and mask except the float bits */ 2108 gpio_reg = (REG_RD(bp, MISC_REG_GPIO) & MISC_REGISTERS_GPIO_FLOAT); 2109 2110 switch (mode) { 2111 case MISC_REGISTERS_GPIO_OUTPUT_LOW: 2112 DP(NETIF_MSG_LINK, 2113 "Set GPIO %d (shift %d) -> output low\n", 2114 gpio_num, gpio_shift); 2115 /* clear FLOAT and set CLR */ 2116 gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS); 2117 gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_CLR_POS); 2118 break; 2119 2120 case MISC_REGISTERS_GPIO_OUTPUT_HIGH: 2121 DP(NETIF_MSG_LINK, 2122 "Set GPIO %d (shift %d) -> output high\n", 2123 gpio_num, gpio_shift); 2124 /* clear FLOAT and set SET */ 2125 gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS); 2126 gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_SET_POS); 2127 break; 2128 2129 case MISC_REGISTERS_GPIO_INPUT_HI_Z: 2130 DP(NETIF_MSG_LINK, 2131 "Set GPIO %d (shift %d) -> input\n", 2132 gpio_num, gpio_shift); 2133 /* set FLOAT */ 2134 gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS); 2135 break; 2136 2137 default: 2138 break; 2139 } 2140 2141 REG_WR(bp, MISC_REG_GPIO, gpio_reg); 2142 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_GPIO); 2143 2144 return 0; 2145} 2146 2147int bnx2x_set_mult_gpio(struct bnx2x *bp, u8 pins, u32 mode) 2148{ 2149 u32 gpio_reg = 0; 2150 int rc = 0; 2151 2152 /* Any port swapping should be handled by caller. */ 2153 2154 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_GPIO); 2155 /* read GPIO and mask except the float bits */ 2156 gpio_reg = REG_RD(bp, MISC_REG_GPIO); 2157 gpio_reg &= ~(pins << MISC_REGISTERS_GPIO_FLOAT_POS); 2158 gpio_reg &= ~(pins << MISC_REGISTERS_GPIO_CLR_POS); 2159 gpio_reg &= ~(pins << MISC_REGISTERS_GPIO_SET_POS); 2160 2161 switch (mode) { 2162 case MISC_REGISTERS_GPIO_OUTPUT_LOW: 2163 DP(NETIF_MSG_LINK, "Set GPIO 0x%x -> output low\n", pins); 2164 /* set CLR */ 2165 gpio_reg |= (pins << MISC_REGISTERS_GPIO_CLR_POS); 2166 break; 2167 2168 case MISC_REGISTERS_GPIO_OUTPUT_HIGH: 2169 DP(NETIF_MSG_LINK, "Set GPIO 0x%x -> output high\n", pins); 2170 /* set SET */ 2171 gpio_reg |= (pins << MISC_REGISTERS_GPIO_SET_POS); 2172 break; 2173 2174 case MISC_REGISTERS_GPIO_INPUT_HI_Z: 2175 DP(NETIF_MSG_LINK, "Set GPIO 0x%x -> input\n", pins); 2176 /* set FLOAT */ 2177 gpio_reg |= (pins << MISC_REGISTERS_GPIO_FLOAT_POS); 2178 break; 2179 2180 default: 2181 BNX2X_ERR("Invalid GPIO mode assignment %d\n", mode); 2182 rc = -EINVAL; 2183 break; 2184 } 2185 2186 if (rc == 0) 2187 REG_WR(bp, MISC_REG_GPIO, gpio_reg); 2188 2189 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_GPIO); 2190 2191 return rc; 2192} 2193 2194int bnx2x_set_gpio_int(struct bnx2x *bp, int gpio_num, u32 mode, u8 port) 2195{ 2196 /* The GPIO should be swapped if swap register is set and active */ 2197 int gpio_port = (REG_RD(bp, NIG_REG_PORT_SWAP) && 2198 REG_RD(bp, NIG_REG_STRAP_OVERRIDE)) ^ port; 2199 int gpio_shift = gpio_num + 2200 (gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0); 2201 u32 gpio_mask = (1 << gpio_shift); 2202 u32 gpio_reg; 2203 2204 if (gpio_num > MISC_REGISTERS_GPIO_3) { 2205 BNX2X_ERR("Invalid GPIO %d\n", gpio_num); 2206 return -EINVAL; 2207 } 2208 2209 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_GPIO); 2210 /* read GPIO int */ 2211 gpio_reg = REG_RD(bp, MISC_REG_GPIO_INT); 2212 2213 switch (mode) { 2214 case MISC_REGISTERS_GPIO_INT_OUTPUT_CLR: 2215 DP(NETIF_MSG_LINK, 2216 "Clear GPIO INT %d (shift %d) -> output low\n", 2217 gpio_num, gpio_shift); 2218 /* clear SET and set CLR */ 2219 gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_INT_SET_POS); 2220 gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_INT_CLR_POS); 2221 break; 2222 2223 case MISC_REGISTERS_GPIO_INT_OUTPUT_SET: 2224 DP(NETIF_MSG_LINK, 2225 "Set GPIO INT %d (shift %d) -> output high\n", 2226 gpio_num, gpio_shift); 2227 /* clear CLR and set SET */ 2228 gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_INT_CLR_POS); 2229 gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_INT_SET_POS); 2230 break; 2231 2232 default: 2233 break; 2234 } 2235 2236 REG_WR(bp, MISC_REG_GPIO_INT, gpio_reg); 2237 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_GPIO); 2238 2239 return 0; 2240} 2241 2242static int bnx2x_set_spio(struct bnx2x *bp, int spio, u32 mode) 2243{ 2244 u32 spio_reg; 2245 2246 /* Only 2 SPIOs are configurable */ 2247 if ((spio != MISC_SPIO_SPIO4) && (spio != MISC_SPIO_SPIO5)) { 2248 BNX2X_ERR("Invalid SPIO 0x%x\n", spio); 2249 return -EINVAL; 2250 } 2251 2252 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_SPIO); 2253 /* read SPIO and mask except the float bits */ 2254 spio_reg = (REG_RD(bp, MISC_REG_SPIO) & MISC_SPIO_FLOAT); 2255 2256 switch (mode) { 2257 case MISC_SPIO_OUTPUT_LOW: 2258 DP(NETIF_MSG_HW, "Set SPIO 0x%x -> output low\n", spio); 2259 /* clear FLOAT and set CLR */ 2260 spio_reg &= ~(spio << MISC_SPIO_FLOAT_POS); 2261 spio_reg |= (spio << MISC_SPIO_CLR_POS); 2262 break; 2263 2264 case MISC_SPIO_OUTPUT_HIGH: 2265 DP(NETIF_MSG_HW, "Set SPIO 0x%x -> output high\n", spio); 2266 /* clear FLOAT and set SET */ 2267 spio_reg &= ~(spio << MISC_SPIO_FLOAT_POS); 2268 spio_reg |= (spio << MISC_SPIO_SET_POS); 2269 break; 2270 2271 case MISC_SPIO_INPUT_HI_Z: 2272 DP(NETIF_MSG_HW, "Set SPIO 0x%x -> input\n", spio); 2273 /* set FLOAT */ 2274 spio_reg |= (spio << MISC_SPIO_FLOAT_POS); 2275 break; 2276 2277 default: 2278 break; 2279 } 2280 2281 REG_WR(bp, MISC_REG_SPIO, spio_reg); 2282 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_SPIO); 2283 2284 return 0; 2285} 2286 2287void bnx2x_calc_fc_adv(struct bnx2x *bp) 2288{ 2289 u8 cfg_idx = bnx2x_get_link_cfg_idx(bp); 2290 switch (bp->link_vars.ieee_fc & 2291 MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK) { 2292 case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE: 2293 bp->port.advertising[cfg_idx] &= ~(ADVERTISED_Asym_Pause | 2294 ADVERTISED_Pause); 2295 break; 2296 2297 case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH: 2298 bp->port.advertising[cfg_idx] |= (ADVERTISED_Asym_Pause | 2299 ADVERTISED_Pause); 2300 break; 2301 2302 case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC: 2303 bp->port.advertising[cfg_idx] |= ADVERTISED_Asym_Pause; 2304 break; 2305 2306 default: 2307 bp->port.advertising[cfg_idx] &= ~(ADVERTISED_Asym_Pause | 2308 ADVERTISED_Pause); 2309 break; 2310 } 2311} 2312 2313static void bnx2x_set_requested_fc(struct bnx2x *bp) 2314{ 2315 /* Initialize link parameters structure variables 2316 * It is recommended to turn off RX FC for jumbo frames 2317 * for better performance 2318 */ 2319 if (CHIP_IS_E1x(bp) && (bp->dev->mtu > 5000)) 2320 bp->link_params.req_fc_auto_adv = BNX2X_FLOW_CTRL_TX; 2321 else 2322 bp->link_params.req_fc_auto_adv = BNX2X_FLOW_CTRL_BOTH; 2323} 2324 2325static void bnx2x_init_dropless_fc(struct bnx2x *bp) 2326{ 2327 u32 pause_enabled = 0; 2328 2329 if (!CHIP_IS_E1(bp) && bp->dropless_fc && bp->link_vars.link_up) { 2330 if (bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_TX) 2331 pause_enabled = 1; 2332 2333 REG_WR(bp, BAR_USTRORM_INTMEM + 2334 USTORM_ETH_PAUSE_ENABLED_OFFSET(BP_PORT(bp)), 2335 pause_enabled); 2336 } 2337 2338 DP(NETIF_MSG_IFUP | NETIF_MSG_LINK, "dropless_fc is %s\n", 2339 pause_enabled ? "enabled" : "disabled"); 2340} 2341 2342int bnx2x_initial_phy_init(struct bnx2x *bp, int load_mode) 2343{ 2344 int rc, cfx_idx = bnx2x_get_link_cfg_idx(bp); 2345 u16 req_line_speed = bp->link_params.req_line_speed[cfx_idx]; 2346 2347 if (!BP_NOMCP(bp)) { 2348 bnx2x_set_requested_fc(bp); 2349 bnx2x_acquire_phy_lock(bp); 2350 2351 if (load_mode == LOAD_DIAG) { 2352 struct link_params *lp = &bp->link_params; 2353 lp->loopback_mode = LOOPBACK_XGXS; 2354 /* do PHY loopback at 10G speed, if possible */ 2355 if (lp->req_line_speed[cfx_idx] < SPEED_10000) { 2356 if (lp->speed_cap_mask[cfx_idx] & 2357 PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) 2358 lp->req_line_speed[cfx_idx] = 2359 SPEED_10000; 2360 else 2361 lp->req_line_speed[cfx_idx] = 2362 SPEED_1000; 2363 } 2364 } 2365 2366 if (load_mode == LOAD_LOOPBACK_EXT) { 2367 struct link_params *lp = &bp->link_params; 2368 lp->loopback_mode = LOOPBACK_EXT; 2369 } 2370 2371 rc = bnx2x_phy_init(&bp->link_params, &bp->link_vars); 2372 2373 bnx2x_release_phy_lock(bp); 2374 2375 bnx2x_init_dropless_fc(bp); 2376 2377 bnx2x_calc_fc_adv(bp); 2378 2379 if (bp->link_vars.link_up) { 2380 bnx2x_stats_handle(bp, STATS_EVENT_LINK_UP); 2381 bnx2x_link_report(bp); 2382 } 2383 queue_delayed_work(bnx2x_wq, &bp->period_task, 0); 2384 bp->link_params.req_line_speed[cfx_idx] = req_line_speed; 2385 return rc; 2386 } 2387 BNX2X_ERR("Bootcode is missing - can not initialize link\n"); 2388 return -EINVAL; 2389} 2390 2391void bnx2x_link_set(struct bnx2x *bp) 2392{ 2393 if (!BP_NOMCP(bp)) { 2394 bnx2x_acquire_phy_lock(bp); 2395 bnx2x_phy_init(&bp->link_params, &bp->link_vars); 2396 bnx2x_release_phy_lock(bp); 2397 2398 bnx2x_init_dropless_fc(bp); 2399 2400 bnx2x_calc_fc_adv(bp); 2401 } else 2402 BNX2X_ERR("Bootcode is missing - can not set link\n"); 2403} 2404 2405static void bnx2x__link_reset(struct bnx2x *bp) 2406{ 2407 if (!BP_NOMCP(bp)) { 2408 bnx2x_acquire_phy_lock(bp); 2409 bnx2x_lfa_reset(&bp->link_params, &bp->link_vars); 2410 bnx2x_release_phy_lock(bp); 2411 } else 2412 BNX2X_ERR("Bootcode is missing - can not reset link\n"); 2413} 2414 2415void bnx2x_force_link_reset(struct bnx2x *bp) 2416{ 2417 bnx2x_acquire_phy_lock(bp); 2418 bnx2x_link_reset(&bp->link_params, &bp->link_vars, 1); 2419 bnx2x_release_phy_lock(bp); 2420} 2421 2422u8 bnx2x_link_test(struct bnx2x *bp, u8 is_serdes) 2423{ 2424 u8 rc = 0; 2425 2426 if (!BP_NOMCP(bp)) { 2427 bnx2x_acquire_phy_lock(bp); 2428 rc = bnx2x_test_link(&bp->link_params, &bp->link_vars, 2429 is_serdes); 2430 bnx2x_release_phy_lock(bp); 2431 } else 2432 BNX2X_ERR("Bootcode is missing - can not test link\n"); 2433 2434 return rc; 2435} 2436 2437/* Calculates the sum of vn_min_rates. 2438 It's needed for further normalizing of the min_rates. 2439 Returns: 2440 sum of vn_min_rates. 2441 or 2442 0 - if all the min_rates are 0. 2443 In the later case fairness algorithm should be deactivated. 2444 If not all min_rates are zero then those that are zeroes will be set to 1. 2445 */ 2446static void bnx2x_calc_vn_min(struct bnx2x *bp, 2447 struct cmng_init_input *input) 2448{ 2449 int all_zero = 1; 2450 int vn; 2451 2452 for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++) { 2453 u32 vn_cfg = bp->mf_config[vn]; 2454 u32 vn_min_rate = ((vn_cfg & FUNC_MF_CFG_MIN_BW_MASK) >> 2455 FUNC_MF_CFG_MIN_BW_SHIFT) * 100; 2456 2457 /* Skip hidden vns */ 2458 if (vn_cfg & FUNC_MF_CFG_FUNC_HIDE) 2459 vn_min_rate = 0; 2460 /* If min rate is zero - set it to 1 */ 2461 else if (!vn_min_rate) 2462 vn_min_rate = DEF_MIN_RATE; 2463 else 2464 all_zero = 0; 2465 2466 input->vnic_min_rate[vn] = vn_min_rate; 2467 } 2468 2469 /* if ETS or all min rates are zeros - disable fairness */ 2470 if (BNX2X_IS_ETS_ENABLED(bp)) { 2471 input->flags.cmng_enables &= 2472 ~CMNG_FLAGS_PER_PORT_FAIRNESS_VN; 2473 DP(NETIF_MSG_IFUP, "Fairness will be disabled due to ETS\n"); 2474 } else if (all_zero) { 2475 input->flags.cmng_enables &= 2476 ~CMNG_FLAGS_PER_PORT_FAIRNESS_VN; 2477 DP(NETIF_MSG_IFUP, 2478 "All MIN values are zeroes fairness will be disabled\n"); 2479 } else 2480 input->flags.cmng_enables |= 2481 CMNG_FLAGS_PER_PORT_FAIRNESS_VN; 2482} 2483 2484static void bnx2x_calc_vn_max(struct bnx2x *bp, int vn, 2485 struct cmng_init_input *input) 2486{ 2487 u16 vn_max_rate; 2488 u32 vn_cfg = bp->mf_config[vn]; 2489 2490 if (vn_cfg & FUNC_MF_CFG_FUNC_HIDE) 2491 vn_max_rate = 0; 2492 else { 2493 u32 maxCfg = bnx2x_extract_max_cfg(bp, vn_cfg); 2494 2495 if (IS_MF_SI(bp)) { 2496 /* maxCfg in percents of linkspeed */ 2497 vn_max_rate = (bp->link_vars.line_speed * maxCfg) / 100; 2498 } else /* SD modes */ 2499 /* maxCfg is absolute in 100Mb units */ 2500 vn_max_rate = maxCfg * 100; 2501 } 2502 2503 DP(NETIF_MSG_IFUP, "vn %d: vn_max_rate %d\n", vn, vn_max_rate); 2504 2505 input->vnic_max_rate[vn] = vn_max_rate; 2506} 2507 2508static int bnx2x_get_cmng_fns_mode(struct bnx2x *bp) 2509{ 2510 if (CHIP_REV_IS_SLOW(bp)) 2511 return CMNG_FNS_NONE; 2512 if (IS_MF(bp)) 2513 return CMNG_FNS_MINMAX; 2514 2515 return CMNG_FNS_NONE; 2516} 2517 2518void bnx2x_read_mf_cfg(struct bnx2x *bp) 2519{ 2520 int vn, n = (CHIP_MODE_IS_4_PORT(bp) ? 2 : 1); 2521 2522 if (BP_NOMCP(bp)) 2523 return; /* what should be the default value in this case */ 2524 2525 /* For 2 port configuration the absolute function number formula 2526 * is: 2527 * abs_func = 2 * vn + BP_PORT + BP_PATH 2528 * 2529 * and there are 4 functions per port 2530 * 2531 * For 4 port configuration it is 2532 * abs_func = 4 * vn + 2 * BP_PORT + BP_PATH 2533 * 2534 * and there are 2 functions per port 2535 */ 2536 for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++) { 2537 int /*abs*/func = n * (2 * vn + BP_PORT(bp)) + BP_PATH(bp); 2538 2539 if (func >= E1H_FUNC_MAX) 2540 break; 2541 2542 bp->mf_config[vn] = 2543 MF_CFG_RD(bp, func_mf_config[func].config); 2544 } 2545 if (bp->mf_config[BP_VN(bp)] & FUNC_MF_CFG_FUNC_DISABLED) { 2546 DP(NETIF_MSG_IFUP, "mf_cfg function disabled\n"); 2547 bp->flags |= MF_FUNC_DIS; 2548 } else { 2549 DP(NETIF_MSG_IFUP, "mf_cfg function enabled\n"); 2550 bp->flags &= ~MF_FUNC_DIS; 2551 } 2552} 2553 2554static void bnx2x_cmng_fns_init(struct bnx2x *bp, u8 read_cfg, u8 cmng_type) 2555{ 2556 struct cmng_init_input input; 2557 memset(&input, 0, sizeof(struct cmng_init_input)); 2558 2559 input.port_rate = bp->link_vars.line_speed; 2560 2561 if (cmng_type == CMNG_FNS_MINMAX && input.port_rate) { 2562 int vn; 2563 2564 /* read mf conf from shmem */ 2565 if (read_cfg) 2566 bnx2x_read_mf_cfg(bp); 2567 2568 /* vn_weight_sum and enable fairness if not 0 */ 2569 bnx2x_calc_vn_min(bp, &input); 2570 2571 /* calculate and set min-max rate for each vn */ 2572 if (bp->port.pmf) 2573 for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++) 2574 bnx2x_calc_vn_max(bp, vn, &input); 2575 2576 /* always enable rate shaping and fairness */ 2577 input.flags.cmng_enables |= 2578 CMNG_FLAGS_PER_PORT_RATE_SHAPING_VN; 2579 2580 bnx2x_init_cmng(&input, &bp->cmng); 2581 return; 2582 } 2583 2584 /* rate shaping and fairness are disabled */ 2585 DP(NETIF_MSG_IFUP, 2586 "rate shaping and fairness are disabled\n"); 2587} 2588 2589static void storm_memset_cmng(struct bnx2x *bp, 2590 struct cmng_init *cmng, 2591 u8 port) 2592{ 2593 int vn; 2594 size_t size = sizeof(struct cmng_struct_per_port); 2595 2596 u32 addr = BAR_XSTRORM_INTMEM + 2597 XSTORM_CMNG_PER_PORT_VARS_OFFSET(port); 2598 2599 __storm_memset_struct(bp, addr, size, (u32 *)&cmng->port); 2600 2601 for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++) { 2602 int func = func_by_vn(bp, vn); 2603 2604 addr = BAR_XSTRORM_INTMEM + 2605 XSTORM_RATE_SHAPING_PER_VN_VARS_OFFSET(func); 2606 size = sizeof(struct rate_shaping_vars_per_vn); 2607 __storm_memset_struct(bp, addr, size, 2608 (u32 *)&cmng->vnic.vnic_max_rate[vn]); 2609 2610 addr = BAR_XSTRORM_INTMEM + 2611 XSTORM_FAIRNESS_PER_VN_VARS_OFFSET(func); 2612 size = sizeof(struct fairness_vars_per_vn); 2613 __storm_memset_struct(bp, addr, size, 2614 (u32 *)&cmng->vnic.vnic_min_rate[vn]); 2615 } 2616} 2617 2618/* init cmng mode in HW according to local configuration */ 2619void bnx2x_set_local_cmng(struct bnx2x *bp) 2620{ 2621 int cmng_fns = bnx2x_get_cmng_fns_mode(bp); 2622 2623 if (cmng_fns != CMNG_FNS_NONE) { 2624 bnx2x_cmng_fns_init(bp, false, cmng_fns); 2625 storm_memset_cmng(bp, &bp->cmng, BP_PORT(bp)); 2626 } else { 2627 /* rate shaping and fairness are disabled */ 2628 DP(NETIF_MSG_IFUP, 2629 "single function mode without fairness\n"); 2630 } 2631} 2632 2633/* This function is called upon link interrupt */ 2634static void bnx2x_link_attn(struct bnx2x *bp) 2635{ 2636 /* Make sure that we are synced with the current statistics */ 2637 bnx2x_stats_handle(bp, STATS_EVENT_STOP); 2638 2639 bnx2x_link_update(&bp->link_params, &bp->link_vars); 2640 2641 bnx2x_init_dropless_fc(bp); 2642 2643 if (bp->link_vars.link_up) { 2644 2645 if (bp->link_vars.mac_type != MAC_TYPE_EMAC) { 2646 struct host_port_stats *pstats; 2647 2648 pstats = bnx2x_sp(bp, port_stats); 2649 /* reset old mac stats */ 2650 memset(&(pstats->mac_stx[0]), 0, 2651 sizeof(struct mac_stx)); 2652 } 2653 if (bp->state == BNX2X_STATE_OPEN) 2654 bnx2x_stats_handle(bp, STATS_EVENT_LINK_UP); 2655 } 2656 2657 if (bp->link_vars.link_up && bp->link_vars.line_speed) 2658 bnx2x_set_local_cmng(bp); 2659 2660 __bnx2x_link_report(bp); 2661 2662 if (IS_MF(bp)) 2663 bnx2x_link_sync_notify(bp); 2664} 2665 2666void bnx2x__link_status_update(struct bnx2x *bp) 2667{ 2668 if (bp->state != BNX2X_STATE_OPEN) 2669 return; 2670 2671 /* read updated dcb configuration */ 2672 if (IS_PF(bp)) { 2673 bnx2x_dcbx_pmf_update(bp); 2674 bnx2x_link_status_update(&bp->link_params, &bp->link_vars); 2675 if (bp->link_vars.link_up) 2676 bnx2x_stats_handle(bp, STATS_EVENT_LINK_UP); 2677 else 2678 bnx2x_stats_handle(bp, STATS_EVENT_STOP); 2679 /* indicate link status */ 2680 bnx2x_link_report(bp); 2681 2682 } else { /* VF */ 2683 bp->port.supported[0] |= (SUPPORTED_10baseT_Half | 2684 SUPPORTED_10baseT_Full | 2685 SUPPORTED_100baseT_Half | 2686 SUPPORTED_100baseT_Full | 2687 SUPPORTED_1000baseT_Full | 2688 SUPPORTED_2500baseX_Full | 2689 SUPPORTED_10000baseT_Full | 2690 SUPPORTED_TP | 2691 SUPPORTED_FIBRE | 2692 SUPPORTED_Autoneg | 2693 SUPPORTED_Pause | 2694 SUPPORTED_Asym_Pause); 2695 bp->port.advertising[0] = bp->port.supported[0]; 2696 2697 bp->link_params.bp = bp; 2698 bp->link_params.port = BP_PORT(bp); 2699 bp->link_params.req_duplex[0] = DUPLEX_FULL; 2700 bp->link_params.req_flow_ctrl[0] = BNX2X_FLOW_CTRL_NONE; 2701 bp->link_params.req_line_speed[0] = SPEED_10000; 2702 bp->link_params.speed_cap_mask[0] = 0x7f0000; 2703 bp->link_params.switch_cfg = SWITCH_CFG_10G; 2704 bp->link_vars.mac_type = MAC_TYPE_BMAC; 2705 bp->link_vars.line_speed = SPEED_10000; 2706 bp->link_vars.link_status = 2707 (LINK_STATUS_LINK_UP | 2708 LINK_STATUS_SPEED_AND_DUPLEX_10GTFD); 2709 bp->link_vars.link_up = 1; 2710 bp->link_vars.duplex = DUPLEX_FULL; 2711 bp->link_vars.flow_ctrl = BNX2X_FLOW_CTRL_NONE; 2712 __bnx2x_link_report(bp); 2713 2714 bnx2x_sample_bulletin(bp); 2715 2716 /* if bulletin board did not have an update for link status 2717 * __bnx2x_link_report will report current status 2718 * but it will NOT duplicate report in case of already reported 2719 * during sampling bulletin board. 2720 */ 2721 bnx2x_stats_handle(bp, STATS_EVENT_LINK_UP); 2722 } 2723} 2724 2725static int bnx2x_afex_func_update(struct bnx2x *bp, u16 vifid, 2726 u16 vlan_val, u8 allowed_prio) 2727{ 2728 struct bnx2x_func_state_params func_params = {NULL}; 2729 struct bnx2x_func_afex_update_params *f_update_params = 2730 &func_params.params.afex_update; 2731 2732 func_params.f_obj = &bp->func_obj; 2733 func_params.cmd = BNX2X_F_CMD_AFEX_UPDATE; 2734 2735 /* no need to wait for RAMROD completion, so don't 2736 * set RAMROD_COMP_WAIT flag 2737 */ 2738 2739 f_update_params->vif_id = vifid; 2740 f_update_params->afex_default_vlan = vlan_val; 2741 f_update_params->allowed_priorities = allowed_prio; 2742 2743 /* if ramrod can not be sent, response to MCP immediately */ 2744 if (bnx2x_func_state_change(bp, &func_params) < 0) 2745 bnx2x_fw_command(bp, DRV_MSG_CODE_AFEX_VIFSET_ACK, 0); 2746 2747 return 0; 2748} 2749 2750static int bnx2x_afex_handle_vif_list_cmd(struct bnx2x *bp, u8 cmd_type, 2751 u16 vif_index, u8 func_bit_map) 2752{ 2753 struct bnx2x_func_state_params func_params = {NULL}; 2754 struct bnx2x_func_afex_viflists_params *update_params = 2755 &func_params.params.afex_viflists; 2756 int rc; 2757 u32 drv_msg_code; 2758 2759 /* validate only LIST_SET and LIST_GET are received from switch */ 2760 if ((cmd_type != VIF_LIST_RULE_GET) && (cmd_type != VIF_LIST_RULE_SET)) 2761 BNX2X_ERR("BUG! afex_handle_vif_list_cmd invalid type 0x%x\n", 2762 cmd_type); 2763 2764 func_params.f_obj = &bp->func_obj; 2765 func_params.cmd = BNX2X_F_CMD_AFEX_VIFLISTS; 2766 2767 /* set parameters according to cmd_type */ 2768 update_params->afex_vif_list_command = cmd_type; 2769 update_params->vif_list_index = vif_index; 2770 update_params->func_bit_map = 2771 (cmd_type == VIF_LIST_RULE_GET) ? 0 : func_bit_map; 2772 update_params->func_to_clear = 0; 2773 drv_msg_code = 2774 (cmd_type == VIF_LIST_RULE_GET) ? 2775 DRV_MSG_CODE_AFEX_LISTGET_ACK : 2776 DRV_MSG_CODE_AFEX_LISTSET_ACK; 2777 2778 /* if ramrod can not be sent, respond to MCP immediately for 2779 * SET and GET requests (other are not triggered from MCP) 2780 */ 2781 rc = bnx2x_func_state_change(bp, &func_params); 2782 if (rc < 0) 2783 bnx2x_fw_command(bp, drv_msg_code, 0); 2784 2785 return 0; 2786} 2787 2788static void bnx2x_handle_afex_cmd(struct bnx2x *bp, u32 cmd) 2789{ 2790 struct afex_stats afex_stats; 2791 u32 func = BP_ABS_FUNC(bp); 2792 u32 mf_config; 2793 u16 vlan_val; 2794 u32 vlan_prio; 2795 u16 vif_id; 2796 u8 allowed_prio; 2797 u8 vlan_mode; 2798 u32 addr_to_write, vifid, addrs, stats_type, i; 2799 2800 if (cmd & DRV_STATUS_AFEX_LISTGET_REQ) { 2801 vifid = SHMEM2_RD(bp, afex_param1_to_driver[BP_FW_MB_IDX(bp)]); 2802 DP(BNX2X_MSG_MCP, 2803 "afex: got MCP req LISTGET_REQ for vifid 0x%x\n", vifid); 2804 bnx2x_afex_handle_vif_list_cmd(bp, VIF_LIST_RULE_GET, vifid, 0); 2805 } 2806 2807 if (cmd & DRV_STATUS_AFEX_LISTSET_REQ) { 2808 vifid = SHMEM2_RD(bp, afex_param1_to_driver[BP_FW_MB_IDX(bp)]); 2809 addrs = SHMEM2_RD(bp, afex_param2_to_driver[BP_FW_MB_IDX(bp)]); 2810 DP(BNX2X_MSG_MCP, 2811 "afex: got MCP req LISTSET_REQ for vifid 0x%x addrs 0x%x\n", 2812 vifid, addrs); 2813 bnx2x_afex_handle_vif_list_cmd(bp, VIF_LIST_RULE_SET, vifid, 2814 addrs); 2815 } 2816 2817 if (cmd & DRV_STATUS_AFEX_STATSGET_REQ) { 2818 addr_to_write = SHMEM2_RD(bp, 2819 afex_scratchpad_addr_to_write[BP_FW_MB_IDX(bp)]); 2820 stats_type = SHMEM2_RD(bp, 2821 afex_param1_to_driver[BP_FW_MB_IDX(bp)]); 2822 2823 DP(BNX2X_MSG_MCP, 2824 "afex: got MCP req STATSGET_REQ, write to addr 0x%x\n", 2825 addr_to_write); 2826 2827 bnx2x_afex_collect_stats(bp, (void *)&afex_stats, stats_type); 2828 2829 /* write response to scratchpad, for MCP */ 2830 for (i = 0; i < (sizeof(struct afex_stats)/sizeof(u32)); i++) 2831 REG_WR(bp, addr_to_write + i*sizeof(u32), 2832 *(((u32 *)(&afex_stats))+i)); 2833 2834 /* send ack message to MCP */ 2835 bnx2x_fw_command(bp, DRV_MSG_CODE_AFEX_STATSGET_ACK, 0); 2836 } 2837 2838 if (cmd & DRV_STATUS_AFEX_VIFSET_REQ) { 2839 mf_config = MF_CFG_RD(bp, func_mf_config[func].config); 2840 bp->mf_config[BP_VN(bp)] = mf_config; 2841 DP(BNX2X_MSG_MCP, 2842 "afex: got MCP req VIFSET_REQ, mf_config 0x%x\n", 2843 mf_config); 2844 2845 /* if VIF_SET is "enabled" */ 2846 if (!(mf_config & FUNC_MF_CFG_FUNC_DISABLED)) { 2847 /* set rate limit directly to internal RAM */ 2848 struct cmng_init_input cmng_input; 2849 struct rate_shaping_vars_per_vn m_rs_vn; 2850 size_t size = sizeof(struct rate_shaping_vars_per_vn); 2851 u32 addr = BAR_XSTRORM_INTMEM + 2852 XSTORM_RATE_SHAPING_PER_VN_VARS_OFFSET(BP_FUNC(bp)); 2853 2854 bp->mf_config[BP_VN(bp)] = mf_config; 2855 2856 bnx2x_calc_vn_max(bp, BP_VN(bp), &cmng_input); 2857 m_rs_vn.vn_counter.rate = 2858 cmng_input.vnic_max_rate[BP_VN(bp)]; 2859 m_rs_vn.vn_counter.quota = 2860 (m_rs_vn.vn_counter.rate * 2861 RS_PERIODIC_TIMEOUT_USEC) / 8; 2862 2863 __storm_memset_struct(bp, addr, size, (u32 *)&m_rs_vn); 2864 2865 /* read relevant values from mf_cfg struct in shmem */ 2866 vif_id = 2867 (MF_CFG_RD(bp, func_mf_config[func].e1hov_tag) & 2868 FUNC_MF_CFG_E1HOV_TAG_MASK) >> 2869 FUNC_MF_CFG_E1HOV_TAG_SHIFT; 2870 vlan_val = 2871 (MF_CFG_RD(bp, func_mf_config[func].e1hov_tag) & 2872 FUNC_MF_CFG_AFEX_VLAN_MASK) >> 2873 FUNC_MF_CFG_AFEX_VLAN_SHIFT; 2874 vlan_prio = (mf_config & 2875 FUNC_MF_CFG_TRANSMIT_PRIORITY_MASK) >> 2876 FUNC_MF_CFG_TRANSMIT_PRIORITY_SHIFT; 2877 vlan_val |= (vlan_prio << VLAN_PRIO_SHIFT); 2878 vlan_mode = 2879 (MF_CFG_RD(bp, 2880 func_mf_config[func].afex_config) & 2881 FUNC_MF_CFG_AFEX_VLAN_MODE_MASK) >> 2882 FUNC_MF_CFG_AFEX_VLAN_MODE_SHIFT; 2883 allowed_prio = 2884 (MF_CFG_RD(bp, 2885 func_mf_config[func].afex_config) & 2886 FUNC_MF_CFG_AFEX_COS_FILTER_MASK) >> 2887 FUNC_MF_CFG_AFEX_COS_FILTER_SHIFT; 2888 2889 /* send ramrod to FW, return in case of failure */ 2890 if (bnx2x_afex_func_update(bp, vif_id, vlan_val, 2891 allowed_prio)) 2892 return; 2893 2894 bp->afex_def_vlan_tag = vlan_val; 2895 bp->afex_vlan_mode = vlan_mode; 2896 } else { 2897 /* notify link down because BP->flags is disabled */ 2898 bnx2x_link_report(bp); 2899 2900 /* send INVALID VIF ramrod to FW */ 2901 bnx2x_afex_func_update(bp, 0xFFFF, 0, 0); 2902 2903 /* Reset the default afex VLAN */ 2904 bp->afex_def_vlan_tag = -1; 2905 } 2906 } 2907} 2908 2909static void bnx2x_handle_update_svid_cmd(struct bnx2x *bp) 2910{ 2911 struct bnx2x_func_switch_update_params *switch_update_params; 2912 struct bnx2x_func_state_params func_params; 2913 2914 memset(&func_params, 0, sizeof(struct bnx2x_func_state_params)); 2915 switch_update_params = &func_params.params.switch_update; 2916 func_params.f_obj = &bp->func_obj; 2917 func_params.cmd = BNX2X_F_CMD_SWITCH_UPDATE; 2918 2919 if (IS_MF_UFP(bp)) { 2920 int func = BP_ABS_FUNC(bp); 2921 u32 val; 2922 2923 /* Re-learn the S-tag from shmem */ 2924 val = MF_CFG_RD(bp, func_mf_config[func].e1hov_tag) & 2925 FUNC_MF_CFG_E1HOV_TAG_MASK; 2926 if (val != FUNC_MF_CFG_E1HOV_TAG_DEFAULT) { 2927 bp->mf_ov = val; 2928 } else { 2929 BNX2X_ERR("Got an SVID event, but no tag is configured in shmem\n"); 2930 goto fail; 2931 } 2932 2933 /* Configure new S-tag in LLH */ 2934 REG_WR(bp, NIG_REG_LLH0_FUNC_VLAN_ID + BP_PORT(bp) * 8, 2935 bp->mf_ov); 2936 2937 /* Send Ramrod to update FW of change */ 2938 __set_bit(BNX2X_F_UPDATE_SD_VLAN_TAG_CHNG, 2939 &switch_update_params->changes); 2940 switch_update_params->vlan = bp->mf_ov; 2941 2942 if (bnx2x_func_state_change(bp, &func_params) < 0) { 2943 BNX2X_ERR("Failed to configure FW of S-tag Change to %02x\n", 2944 bp->mf_ov); 2945 goto fail; 2946 } 2947 2948 DP(BNX2X_MSG_MCP, "Configured S-tag %02x\n", bp->mf_ov); 2949 2950 bnx2x_fw_command(bp, DRV_MSG_CODE_OEM_UPDATE_SVID_OK, 0); 2951 2952 return; 2953 } 2954 2955 /* not supported by SW yet */ 2956fail: 2957 bnx2x_fw_command(bp, DRV_MSG_CODE_OEM_UPDATE_SVID_FAILURE, 0); 2958} 2959 2960static void bnx2x_pmf_update(struct bnx2x *bp) 2961{ 2962 int port = BP_PORT(bp); 2963 u32 val; 2964 2965 bp->port.pmf = 1; 2966 DP(BNX2X_MSG_MCP, "pmf %d\n", bp->port.pmf); 2967 2968 /* 2969 * We need the mb() to ensure the ordering between the writing to 2970 * bp->port.pmf here and reading it from the bnx2x_periodic_task(). 2971 */ 2972 smp_mb(); 2973 2974 /* queue a periodic task */ 2975 queue_delayed_work(bnx2x_wq, &bp->period_task, 0); 2976 2977 bnx2x_dcbx_pmf_update(bp); 2978 2979 /* enable nig attention */ 2980 val = (0xff0f | (1 << (BP_VN(bp) + 4))); 2981 if (bp->common.int_block == INT_BLOCK_HC) { 2982 REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, val); 2983 REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, val); 2984 } else if (!CHIP_IS_E1x(bp)) { 2985 REG_WR(bp, IGU_REG_TRAILING_EDGE_LATCH, val); 2986 REG_WR(bp, IGU_REG_LEADING_EDGE_LATCH, val); 2987 } 2988 2989 bnx2x_stats_handle(bp, STATS_EVENT_PMF); 2990} 2991 2992/* end of Link */ 2993 2994/* slow path */ 2995 2996/* 2997 * General service functions 2998 */ 2999 3000/* send the MCP a request, block until there is a reply */ 3001u32 bnx2x_fw_command(struct bnx2x *bp, u32 command, u32 param) 3002{ 3003 int mb_idx = BP_FW_MB_IDX(bp); 3004 u32 seq; 3005 u32 rc = 0; 3006 u32 cnt = 1; 3007 u8 delay = CHIP_REV_IS_SLOW(bp) ? 100 : 10; 3008 3009 mutex_lock(&bp->fw_mb_mutex); 3010 seq = ++bp->fw_seq; 3011 SHMEM_WR(bp, func_mb[mb_idx].drv_mb_param, param); 3012 SHMEM_WR(bp, func_mb[mb_idx].drv_mb_header, (command | seq)); 3013 3014 DP(BNX2X_MSG_MCP, "wrote command (%x) to FW MB param 0x%08x\n", 3015 (command | seq), param); 3016 3017 do { 3018 /* let the FW do it's magic ... */ 3019 msleep(delay); 3020 3021 rc = SHMEM_RD(bp, func_mb[mb_idx].fw_mb_header); 3022 3023 /* Give the FW up to 5 second (500*10ms) */ 3024 } while ((seq != (rc & FW_MSG_SEQ_NUMBER_MASK)) && (cnt++ < 500)); 3025 3026 DP(BNX2X_MSG_MCP, "[after %d ms] read (%x) seq is (%x) from FW MB\n", 3027 cnt*delay, rc, seq); 3028 3029 /* is this a reply to our command? */ 3030 if (seq == (rc & FW_MSG_SEQ_NUMBER_MASK)) 3031 rc &= FW_MSG_CODE_MASK; 3032 else { 3033 /* FW BUG! */ 3034 BNX2X_ERR("FW failed to respond!\n"); 3035 bnx2x_fw_dump(bp); 3036 rc = 0; 3037 } 3038 mutex_unlock(&bp->fw_mb_mutex); 3039 3040 return rc; 3041} 3042 3043static void storm_memset_func_cfg(struct bnx2x *bp, 3044 struct tstorm_eth_function_common_config *tcfg, 3045 u16 abs_fid) 3046{ 3047 size_t size = sizeof(struct tstorm_eth_function_common_config); 3048 3049 u32 addr = BAR_TSTRORM_INTMEM + 3050 TSTORM_FUNCTION_COMMON_CONFIG_OFFSET(abs_fid); 3051 3052 __storm_memset_struct(bp, addr, size, (u32 *)tcfg); 3053} 3054 3055void bnx2x_func_init(struct bnx2x *bp, struct bnx2x_func_init_params *p) 3056{ 3057 if (CHIP_IS_E1x(bp)) { 3058 struct tstorm_eth_function_common_config tcfg = {0}; 3059 3060 storm_memset_func_cfg(bp, &tcfg, p->func_id); 3061 } 3062 3063 /* Enable the function in the FW */ 3064 storm_memset_vf_to_pf(bp, p->func_id, p->pf_id); 3065 storm_memset_func_en(bp, p->func_id, 1); 3066 3067 /* spq */ 3068 if (p->func_flgs & FUNC_FLG_SPQ) { 3069 storm_memset_spq_addr(bp, p->spq_map, p->func_id); 3070 REG_WR(bp, XSEM_REG_FAST_MEMORY + 3071 XSTORM_SPQ_PROD_OFFSET(p->func_id), p->spq_prod); 3072 } 3073} 3074 3075/** 3076 * bnx2x_get_common_flags - Return common flags 3077 * 3078 * @bp device handle 3079 * @fp queue handle 3080 * @zero_stats TRUE if statistics zeroing is needed 3081 * 3082 * Return the flags that are common for the Tx-only and not normal connections. 3083 */ 3084static unsigned long bnx2x_get_common_flags(struct bnx2x *bp, 3085 struct bnx2x_fastpath *fp, 3086 bool zero_stats) 3087{ 3088 unsigned long flags = 0; 3089 3090 /* PF driver will always initialize the Queue to an ACTIVE state */ 3091 __set_bit(BNX2X_Q_FLG_ACTIVE, &flags); 3092 3093 /* tx only connections collect statistics (on the same index as the 3094 * parent connection). The statistics are zeroed when the parent 3095 * connection is initialized. 3096 */ 3097 3098 __set_bit(BNX2X_Q_FLG_STATS, &flags); 3099 if (zero_stats) 3100 __set_bit(BNX2X_Q_FLG_ZERO_STATS, &flags); 3101 3102 if (bp->flags & TX_SWITCHING) 3103 __set_bit(BNX2X_Q_FLG_TX_SWITCH, &flags); 3104 3105 __set_bit(BNX2X_Q_FLG_PCSUM_ON_PKT, &flags); 3106 __set_bit(BNX2X_Q_FLG_TUN_INC_INNER_IP_ID, &flags); 3107 3108#ifdef BNX2X_STOP_ON_ERROR 3109 __set_bit(BNX2X_Q_FLG_TX_SEC, &flags); 3110#endif 3111 3112 return flags; 3113} 3114 3115static unsigned long bnx2x_get_q_flags(struct bnx2x *bp, 3116 struct bnx2x_fastpath *fp, 3117 bool leading) 3118{ 3119 unsigned long flags = 0; 3120 3121 /* calculate other queue flags */ 3122 if (IS_MF_SD(bp)) 3123 __set_bit(BNX2X_Q_FLG_OV, &flags); 3124 3125 if (IS_FCOE_FP(fp)) { 3126 __set_bit(BNX2X_Q_FLG_FCOE, &flags); 3127 /* For FCoE - force usage of default priority (for afex) */ 3128 __set_bit(BNX2X_Q_FLG_FORCE_DEFAULT_PRI, &flags); 3129 } 3130 3131 if (fp->mode != TPA_MODE_DISABLED) { 3132 __set_bit(BNX2X_Q_FLG_TPA, &flags); 3133 __set_bit(BNX2X_Q_FLG_TPA_IPV6, &flags); 3134 if (fp->mode == TPA_MODE_GRO) 3135 __set_bit(BNX2X_Q_FLG_TPA_GRO, &flags); 3136 } 3137 3138 if (leading) { 3139 __set_bit(BNX2X_Q_FLG_LEADING_RSS, &flags); 3140 __set_bit(BNX2X_Q_FLG_MCAST, &flags); 3141 } 3142 3143 /* Always set HW VLAN stripping */ 3144 __set_bit(BNX2X_Q_FLG_VLAN, &flags); 3145 3146 /* configure silent vlan removal */ 3147 if (IS_MF_AFEX(bp)) 3148 __set_bit(BNX2X_Q_FLG_SILENT_VLAN_REM, &flags); 3149 3150 return flags | bnx2x_get_common_flags(bp, fp, true); 3151} 3152 3153static void bnx2x_pf_q_prep_general(struct bnx2x *bp, 3154 struct bnx2x_fastpath *fp, struct bnx2x_general_setup_params *gen_init, 3155 u8 cos) 3156{ 3157 gen_init->stat_id = bnx2x_stats_id(fp); 3158 gen_init->spcl_id = fp->cl_id; 3159 3160 /* Always use mini-jumbo MTU for FCoE L2 ring */ 3161 if (IS_FCOE_FP(fp)) 3162 gen_init->mtu = BNX2X_FCOE_MINI_JUMBO_MTU; 3163 else 3164 gen_init->mtu = bp->dev->mtu; 3165 3166 gen_init->cos = cos; 3167 3168 gen_init->fp_hsi = ETH_FP_HSI_VERSION; 3169} 3170 3171static void bnx2x_pf_rx_q_prep(struct bnx2x *bp, 3172 struct bnx2x_fastpath *fp, struct rxq_pause_params *pause, 3173 struct bnx2x_rxq_setup_params *rxq_init) 3174{ 3175 u8 max_sge = 0; 3176 u16 sge_sz = 0; 3177 u16 tpa_agg_size = 0; 3178 3179 if (fp->mode != TPA_MODE_DISABLED) { 3180 pause->sge_th_lo = SGE_TH_LO(bp); 3181 pause->sge_th_hi = SGE_TH_HI(bp); 3182 3183 /* validate SGE ring has enough to cross high threshold */ 3184 WARN_ON(bp->dropless_fc && 3185 pause->sge_th_hi + FW_PREFETCH_CNT > 3186 MAX_RX_SGE_CNT * NUM_RX_SGE_PAGES); 3187 3188 tpa_agg_size = TPA_AGG_SIZE; 3189 max_sge = SGE_PAGE_ALIGN(bp->dev->mtu) >> 3190 SGE_PAGE_SHIFT; 3191 max_sge = ((max_sge + PAGES_PER_SGE - 1) & 3192 (~(PAGES_PER_SGE-1))) >> PAGES_PER_SGE_SHIFT; 3193 sge_sz = (u16)min_t(u32, SGE_PAGES, 0xffff); 3194 } 3195 3196 /* pause - not for e1 */ 3197 if (!CHIP_IS_E1(bp)) { 3198 pause->bd_th_lo = BD_TH_LO(bp); 3199 pause->bd_th_hi = BD_TH_HI(bp); 3200 3201 pause->rcq_th_lo = RCQ_TH_LO(bp); 3202 pause->rcq_th_hi = RCQ_TH_HI(bp); 3203 /* 3204 * validate that rings have enough entries to cross 3205 * high thresholds 3206 */ 3207 WARN_ON(bp->dropless_fc && 3208 pause->bd_th_hi + FW_PREFETCH_CNT > 3209 bp->rx_ring_size); 3210 WARN_ON(bp->dropless_fc && 3211 pause->rcq_th_hi + FW_PREFETCH_CNT > 3212 NUM_RCQ_RINGS * MAX_RCQ_DESC_CNT); 3213 3214 pause->pri_map = 1; 3215 } 3216 3217 /* rxq setup */ 3218 rxq_init->dscr_map = fp->rx_desc_mapping; 3219 rxq_init->sge_map = fp->rx_sge_mapping; 3220 rxq_init->rcq_map = fp->rx_comp_mapping; 3221 rxq_init->rcq_np_map = fp->rx_comp_mapping + BCM_PAGE_SIZE; 3222 3223 /* This should be a maximum number of data bytes that may be 3224 * placed on the BD (not including paddings). 3225 */ 3226 rxq_init->buf_sz = fp->rx_buf_size - BNX2X_FW_RX_ALIGN_START - 3227 BNX2X_FW_RX_ALIGN_END - IP_HEADER_ALIGNMENT_PADDING; 3228 3229 rxq_init->cl_qzone_id = fp->cl_qzone_id; 3230 rxq_init->tpa_agg_sz = tpa_agg_size; 3231 rxq_init->sge_buf_sz = sge_sz; 3232 rxq_init->max_sges_pkt = max_sge; 3233 rxq_init->rss_engine_id = BP_FUNC(bp); 3234 rxq_init->mcast_engine_id = BP_FUNC(bp); 3235 3236 /* Maximum number or simultaneous TPA aggregation for this Queue. 3237 * 3238 * For PF Clients it should be the maximum available number. 3239 * VF driver(s) may want to define it to a smaller value. 3240 */ 3241 rxq_init->max_tpa_queues = MAX_AGG_QS(bp); 3242 3243 rxq_init->cache_line_log = BNX2X_RX_ALIGN_SHIFT; 3244 rxq_init->fw_sb_id = fp->fw_sb_id; 3245 3246 if (IS_FCOE_FP(fp)) 3247 rxq_init->sb_cq_index = HC_SP_INDEX_ETH_FCOE_RX_CQ_CONS; 3248 else 3249 rxq_init->sb_cq_index = HC_INDEX_ETH_RX_CQ_CONS; 3250 /* configure silent vlan removal 3251 * if multi function mode is afex, then mask default vlan 3252 */ 3253 if (IS_MF_AFEX(bp)) { 3254 rxq_init->silent_removal_value = bp->afex_def_vlan_tag; 3255 rxq_init->silent_removal_mask = VLAN_VID_MASK; 3256 } 3257} 3258 3259static void bnx2x_pf_tx_q_prep(struct bnx2x *bp, 3260 struct bnx2x_fastpath *fp, struct bnx2x_txq_setup_params *txq_init, 3261 u8 cos) 3262{ 3263 txq_init->dscr_map = fp->txdata_ptr[cos]->tx_desc_mapping; 3264 txq_init->sb_cq_index = HC_INDEX_ETH_FIRST_TX_CQ_CONS + cos; 3265 txq_init->traffic_type = LLFC_TRAFFIC_TYPE_NW; 3266 txq_init->fw_sb_id = fp->fw_sb_id; 3267 3268 /* 3269 * set the tss leading client id for TX classification == 3270 * leading RSS client id 3271 */ 3272 txq_init->tss_leading_cl_id = bnx2x_fp(bp, 0, cl_id); 3273 3274 if (IS_FCOE_FP(fp)) { 3275 txq_init->sb_cq_index = HC_SP_INDEX_ETH_FCOE_TX_CQ_CONS; 3276 txq_init->traffic_type = LLFC_TRAFFIC_TYPE_FCOE; 3277 } 3278} 3279 3280static void bnx2x_pf_init(struct bnx2x *bp) 3281{ 3282 struct bnx2x_func_init_params func_init = {0}; 3283 struct event_ring_data eq_data = { {0} }; 3284 u16 flags; 3285 3286 if (!CHIP_IS_E1x(bp)) { 3287 /* reset IGU PF statistics: MSIX + ATTN */ 3288 /* PF */ 3289 REG_WR(bp, IGU_REG_STATISTIC_NUM_MESSAGE_SENT + 3290 BNX2X_IGU_STAS_MSG_VF_CNT*4 + 3291 (CHIP_MODE_IS_4_PORT(bp) ? 3292 BP_FUNC(bp) : BP_VN(bp))*4, 0); 3293 /* ATTN */ 3294 REG_WR(bp, IGU_REG_STATISTIC_NUM_MESSAGE_SENT + 3295 BNX2X_IGU_STAS_MSG_VF_CNT*4 + 3296 BNX2X_IGU_STAS_MSG_PF_CNT*4 + 3297 (CHIP_MODE_IS_4_PORT(bp) ? 3298 BP_FUNC(bp) : BP_VN(bp))*4, 0); 3299 } 3300 3301 /* function setup flags */ 3302 flags = (FUNC_FLG_STATS | FUNC_FLG_LEADING | FUNC_FLG_SPQ); 3303 3304 /* This flag is relevant for E1x only. 3305 * E2 doesn't have a TPA configuration in a function level. 3306 */ 3307 flags |= (bp->dev->features & NETIF_F_LRO) ? FUNC_FLG_TPA : 0; 3308 3309 func_init.func_flgs = flags; 3310 func_init.pf_id = BP_FUNC(bp); 3311 func_init.func_id = BP_FUNC(bp); 3312 func_init.spq_map = bp->spq_mapping; 3313 func_init.spq_prod = bp->spq_prod_idx; 3314 3315 bnx2x_func_init(bp, &func_init); 3316 3317 memset(&(bp->cmng), 0, sizeof(struct cmng_struct_per_port)); 3318 3319 /* 3320 * Congestion management values depend on the link rate 3321 * There is no active link so initial link rate is set to 10 Gbps. 3322 * When the link comes up The congestion management values are 3323 * re-calculated according to the actual link rate. 3324 */ 3325 bp->link_vars.line_speed = SPEED_10000; 3326 bnx2x_cmng_fns_init(bp, true, bnx2x_get_cmng_fns_mode(bp)); 3327 3328 /* Only the PMF sets the HW */ 3329 if (bp->port.pmf) 3330 storm_memset_cmng(bp, &bp->cmng, BP_PORT(bp)); 3331 3332 /* init Event Queue - PCI bus guarantees correct endianity*/ 3333 eq_data.base_addr.hi = U64_HI(bp->eq_mapping); 3334 eq_data.base_addr.lo = U64_LO(bp->eq_mapping); 3335 eq_data.producer = bp->eq_prod; 3336 eq_data.index_id = HC_SP_INDEX_EQ_CONS; 3337 eq_data.sb_id = DEF_SB_ID; 3338 storm_memset_eq_data(bp, &eq_data, BP_FUNC(bp)); 3339} 3340 3341static void bnx2x_e1h_disable(struct bnx2x *bp) 3342{ 3343 int port = BP_PORT(bp); 3344 3345 bnx2x_tx_disable(bp); 3346 3347 REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 0); 3348} 3349 3350static void bnx2x_e1h_enable(struct bnx2x *bp) 3351{ 3352 int port = BP_PORT(bp); 3353 3354 if (!(IS_MF_UFP(bp) && BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp))) 3355 REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port * 8, 1); 3356 3357 /* Tx queue should be only re-enabled */ 3358 netif_tx_wake_all_queues(bp->dev); 3359 3360 /* 3361 * Should not call netif_carrier_on since it will be called if the link 3362 * is up when checking for link state 3363 */ 3364} 3365 3366#define DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED 3 3367 3368static void bnx2x_drv_info_ether_stat(struct bnx2x *bp) 3369{ 3370 struct eth_stats_info *ether_stat = 3371 &bp->slowpath->drv_info_to_mcp.ether_stat; 3372 struct bnx2x_vlan_mac_obj *mac_obj = 3373 &bp->sp_objs->mac_obj; 3374 int i; 3375 3376 strlcpy(ether_stat->version, DRV_MODULE_VERSION, 3377 ETH_STAT_INFO_VERSION_LEN); 3378 3379 /* get DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED macs, placing them in the 3380 * mac_local field in ether_stat struct. The base address is offset by 2 3381 * bytes to account for the field being 8 bytes but a mac address is 3382 * only 6 bytes. Likewise, the stride for the get_n_elements function is 3383 * 2 bytes to compensate from the 6 bytes of a mac to the 8 bytes 3384 * allocated by the ether_stat struct, so the macs will land in their 3385 * proper positions. 3386 */ 3387 for (i = 0; i < DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED; i++) 3388 memset(ether_stat->mac_local + i, 0, 3389 sizeof(ether_stat->mac_local[0])); 3390 mac_obj->get_n_elements(bp, &bp->sp_objs[0].mac_obj, 3391 DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED, 3392 ether_stat->mac_local + MAC_PAD, MAC_PAD, 3393 ETH_ALEN); 3394 ether_stat->mtu_size = bp->dev->mtu; 3395 if (bp->dev->features & NETIF_F_RXCSUM) 3396 ether_stat->feature_flags |= FEATURE_ETH_CHKSUM_OFFLOAD_MASK; 3397 if (bp->dev->features & NETIF_F_TSO) 3398 ether_stat->feature_flags |= FEATURE_ETH_LSO_MASK; 3399 ether_stat->feature_flags |= bp->common.boot_mode; 3400 3401 ether_stat->promiscuous_mode = (bp->dev->flags & IFF_PROMISC) ? 1 : 0; 3402 3403 ether_stat->txq_size = bp->tx_ring_size; 3404 ether_stat->rxq_size = bp->rx_ring_size; 3405 3406#ifdef CONFIG_BNX2X_SRIOV 3407 ether_stat->vf_cnt = IS_SRIOV(bp) ? bp->vfdb->sriov.nr_virtfn : 0; 3408#endif 3409} 3410 3411static void bnx2x_drv_info_fcoe_stat(struct bnx2x *bp) 3412{ 3413 struct bnx2x_dcbx_app_params *app = &bp->dcbx_port_params.app; 3414 struct fcoe_stats_info *fcoe_stat = 3415 &bp->slowpath->drv_info_to_mcp.fcoe_stat; 3416 3417 if (!CNIC_LOADED(bp)) 3418 return; 3419 3420 memcpy(fcoe_stat->mac_local + MAC_PAD, bp->fip_mac, ETH_ALEN); 3421 3422 fcoe_stat->qos_priority = 3423 app->traffic_type_priority[LLFC_TRAFFIC_TYPE_FCOE]; 3424 3425 /* insert FCoE stats from ramrod response */ 3426 if (!NO_FCOE(bp)) { 3427 struct tstorm_per_queue_stats *fcoe_q_tstorm_stats = 3428 &bp->fw_stats_data->queue_stats[FCOE_IDX(bp)]. 3429 tstorm_queue_statistics; 3430 3431 struct xstorm_per_queue_stats *fcoe_q_xstorm_stats = 3432 &bp->fw_stats_data->queue_stats[FCOE_IDX(bp)]. 3433 xstorm_queue_statistics; 3434 3435 struct fcoe_statistics_params *fw_fcoe_stat = 3436 &bp->fw_stats_data->fcoe; 3437 3438 ADD_64_LE(fcoe_stat->rx_bytes_hi, LE32_0, 3439 fcoe_stat->rx_bytes_lo, 3440 fw_fcoe_stat->rx_stat0.fcoe_rx_byte_cnt); 3441 3442 ADD_64_LE(fcoe_stat->rx_bytes_hi, 3443 fcoe_q_tstorm_stats->rcv_ucast_bytes.hi, 3444 fcoe_stat->rx_bytes_lo, 3445 fcoe_q_tstorm_stats->rcv_ucast_bytes.lo); 3446 3447 ADD_64_LE(fcoe_stat->rx_bytes_hi, 3448 fcoe_q_tstorm_stats->rcv_bcast_bytes.hi, 3449 fcoe_stat->rx_bytes_lo, 3450 fcoe_q_tstorm_stats->rcv_bcast_bytes.lo); 3451 3452 ADD_64_LE(fcoe_stat->rx_bytes_hi, 3453 fcoe_q_tstorm_stats->rcv_mcast_bytes.hi, 3454 fcoe_stat->rx_bytes_lo, 3455 fcoe_q_tstorm_stats->rcv_mcast_bytes.lo); 3456 3457 ADD_64_LE(fcoe_stat->rx_frames_hi, LE32_0, 3458 fcoe_stat->rx_frames_lo, 3459 fw_fcoe_stat->rx_stat0.fcoe_rx_pkt_cnt); 3460 3461 ADD_64_LE(fcoe_stat->rx_frames_hi, LE32_0, 3462 fcoe_stat->rx_frames_lo, 3463 fcoe_q_tstorm_stats->rcv_ucast_pkts); 3464 3465 ADD_64_LE(fcoe_stat->rx_frames_hi, LE32_0, 3466 fcoe_stat->rx_frames_lo, 3467 fcoe_q_tstorm_stats->rcv_bcast_pkts); 3468 3469 ADD_64_LE(fcoe_stat->rx_frames_hi, LE32_0, 3470 fcoe_stat->rx_frames_lo, 3471 fcoe_q_tstorm_stats->rcv_mcast_pkts); 3472 3473 ADD_64_LE(fcoe_stat->tx_bytes_hi, LE32_0, 3474 fcoe_stat->tx_bytes_lo, 3475 fw_fcoe_stat->tx_stat.fcoe_tx_byte_cnt); 3476 3477 ADD_64_LE(fcoe_stat->tx_bytes_hi, 3478 fcoe_q_xstorm_stats->ucast_bytes_sent.hi, 3479 fcoe_stat->tx_bytes_lo, 3480 fcoe_q_xstorm_stats->ucast_bytes_sent.lo); 3481 3482 ADD_64_LE(fcoe_stat->tx_bytes_hi, 3483 fcoe_q_xstorm_stats->bcast_bytes_sent.hi, 3484 fcoe_stat->tx_bytes_lo, 3485 fcoe_q_xstorm_stats->bcast_bytes_sent.lo); 3486 3487 ADD_64_LE(fcoe_stat->tx_bytes_hi, 3488 fcoe_q_xstorm_stats->mcast_bytes_sent.hi, 3489 fcoe_stat->tx_bytes_lo, 3490 fcoe_q_xstorm_stats->mcast_bytes_sent.lo); 3491 3492 ADD_64_LE(fcoe_stat->tx_frames_hi, LE32_0, 3493 fcoe_stat->tx_frames_lo, 3494 fw_fcoe_stat->tx_stat.fcoe_tx_pkt_cnt); 3495 3496 ADD_64_LE(fcoe_stat->tx_frames_hi, LE32_0, 3497 fcoe_stat->tx_frames_lo, 3498 fcoe_q_xstorm_stats->ucast_pkts_sent); 3499 3500 ADD_64_LE(fcoe_stat->tx_frames_hi, LE32_0, 3501 fcoe_stat->tx_frames_lo, 3502 fcoe_q_xstorm_stats->bcast_pkts_sent); 3503 3504 ADD_64_LE(fcoe_stat->tx_frames_hi, LE32_0, 3505 fcoe_stat->tx_frames_lo, 3506 fcoe_q_xstorm_stats->mcast_pkts_sent); 3507 } 3508 3509 /* ask L5 driver to add data to the struct */ 3510 bnx2x_cnic_notify(bp, CNIC_CTL_FCOE_STATS_GET_CMD); 3511} 3512 3513static void bnx2x_drv_info_iscsi_stat(struct bnx2x *bp) 3514{ 3515 struct bnx2x_dcbx_app_params *app = &bp->dcbx_port_params.app; 3516 struct iscsi_stats_info *iscsi_stat = 3517 &bp->slowpath->drv_info_to_mcp.iscsi_stat; 3518 3519 if (!CNIC_LOADED(bp)) 3520 return; 3521 3522 memcpy(iscsi_stat->mac_local + MAC_PAD, bp->cnic_eth_dev.iscsi_mac, 3523 ETH_ALEN); 3524 3525 iscsi_stat->qos_priority = 3526 app->traffic_type_priority[LLFC_TRAFFIC_TYPE_ISCSI]; 3527 3528 /* ask L5 driver to add data to the struct */ 3529 bnx2x_cnic_notify(bp, CNIC_CTL_ISCSI_STATS_GET_CMD); 3530} 3531 3532/* called due to MCP event (on pmf): 3533 * reread new bandwidth configuration 3534 * configure FW 3535 * notify others function about the change 3536 */ 3537static void bnx2x_config_mf_bw(struct bnx2x *bp) 3538{ 3539 if (bp->link_vars.link_up) { 3540 bnx2x_cmng_fns_init(bp, true, CMNG_FNS_MINMAX); 3541 bnx2x_link_sync_notify(bp); 3542 } 3543 storm_memset_cmng(bp, &bp->cmng, BP_PORT(bp)); 3544} 3545 3546static void bnx2x_set_mf_bw(struct bnx2x *bp) 3547{ 3548 bnx2x_config_mf_bw(bp); 3549 bnx2x_fw_command(bp, DRV_MSG_CODE_SET_MF_BW_ACK, 0); 3550} 3551 3552static void bnx2x_handle_eee_event(struct bnx2x *bp) 3553{ 3554 DP(BNX2X_MSG_MCP, "EEE - LLDP event\n"); 3555 bnx2x_fw_command(bp, DRV_MSG_CODE_EEE_RESULTS_ACK, 0); 3556} 3557 3558#define BNX2X_UPDATE_DRV_INFO_IND_LENGTH (20) 3559#define BNX2X_UPDATE_DRV_INFO_IND_COUNT (25) 3560 3561static void bnx2x_handle_drv_info_req(struct bnx2x *bp) 3562{ 3563 enum drv_info_opcode op_code; 3564 u32 drv_info_ctl = SHMEM2_RD(bp, drv_info_control); 3565 bool release = false; 3566 int wait; 3567 3568 /* if drv_info version supported by MFW doesn't match - send NACK */ 3569 if ((drv_info_ctl & DRV_INFO_CONTROL_VER_MASK) != DRV_INFO_CUR_VER) { 3570 bnx2x_fw_command(bp, DRV_MSG_CODE_DRV_INFO_NACK, 0); 3571 return; 3572 } 3573 3574 op_code = (drv_info_ctl & DRV_INFO_CONTROL_OP_CODE_MASK) >> 3575 DRV_INFO_CONTROL_OP_CODE_SHIFT; 3576 3577 /* Must prevent other flows from accessing drv_info_to_mcp */ 3578 mutex_lock(&bp->drv_info_mutex); 3579 3580 memset(&bp->slowpath->drv_info_to_mcp, 0, 3581 sizeof(union drv_info_to_mcp)); 3582 3583 switch (op_code) { 3584 case ETH_STATS_OPCODE: 3585 bnx2x_drv_info_ether_stat(bp); 3586 break; 3587 case FCOE_STATS_OPCODE: 3588 bnx2x_drv_info_fcoe_stat(bp); 3589 break; 3590 case ISCSI_STATS_OPCODE: 3591 bnx2x_drv_info_iscsi_stat(bp); 3592 break; 3593 default: 3594 /* if op code isn't supported - send NACK */ 3595 bnx2x_fw_command(bp, DRV_MSG_CODE_DRV_INFO_NACK, 0); 3596 goto out; 3597 } 3598 3599 /* if we got drv_info attn from MFW then these fields are defined in 3600 * shmem2 for sure 3601 */ 3602 SHMEM2_WR(bp, drv_info_host_addr_lo, 3603 U64_LO(bnx2x_sp_mapping(bp, drv_info_to_mcp))); 3604 SHMEM2_WR(bp, drv_info_host_addr_hi, 3605 U64_HI(bnx2x_sp_mapping(bp, drv_info_to_mcp))); 3606 3607 bnx2x_fw_command(bp, DRV_MSG_CODE_DRV_INFO_ACK, 0); 3608 3609 /* Since possible management wants both this and get_driver_version 3610 * need to wait until management notifies us it finished utilizing 3611 * the buffer. 3612 */ 3613 if (!SHMEM2_HAS(bp, mfw_drv_indication)) { 3614 DP(BNX2X_MSG_MCP, "Management does not support indication\n"); 3615 } else if (!bp->drv_info_mng_owner) { 3616 u32 bit = MFW_DRV_IND_READ_DONE_OFFSET((BP_ABS_FUNC(bp) >> 1)); 3617 3618 for (wait = 0; wait < BNX2X_UPDATE_DRV_INFO_IND_COUNT; wait++) { 3619 u32 indication = SHMEM2_RD(bp, mfw_drv_indication); 3620 3621 /* Management is done; need to clear indication */ 3622 if (indication & bit) { 3623 SHMEM2_WR(bp, mfw_drv_indication, 3624 indication & ~bit); 3625 release = true; 3626 break; 3627 } 3628 3629 msleep(BNX2X_UPDATE_DRV_INFO_IND_LENGTH); 3630 } 3631 } 3632 if (!release) { 3633 DP(BNX2X_MSG_MCP, "Management did not release indication\n"); 3634 bp->drv_info_mng_owner = true; 3635 } 3636 3637out: 3638 mutex_unlock(&bp->drv_info_mutex); 3639} 3640 3641static u32 bnx2x_update_mng_version_utility(u8 *version, bool bnx2x_format) 3642{ 3643 u8 vals[4]; 3644 int i = 0; 3645 3646 if (bnx2x_format) { 3647 i = sscanf(version, "1.%c%hhd.%hhd.%hhd", 3648 &vals[0], &vals[1], &vals[2], &vals[3]); 3649 if (i > 0) 3650 vals[0] -= '0'; 3651 } else { 3652 i = sscanf(version, "%hhd.%hhd.%hhd.%hhd", 3653 &vals[0], &vals[1], &vals[2], &vals[3]); 3654 } 3655 3656 while (i < 4) 3657 vals[i++] = 0; 3658 3659 return (vals[0] << 24) | (vals[1] << 16) | (vals[2] << 8) | vals[3]; 3660} 3661 3662void bnx2x_update_mng_version(struct bnx2x *bp) 3663{ 3664 u32 iscsiver = DRV_VER_NOT_LOADED; 3665 u32 fcoever = DRV_VER_NOT_LOADED; 3666 u32 ethver = DRV_VER_NOT_LOADED; 3667 int idx = BP_FW_MB_IDX(bp); 3668 u8 *version; 3669 3670 if (!SHMEM2_HAS(bp, func_os_drv_ver)) 3671 return; 3672 3673 mutex_lock(&bp->drv_info_mutex); 3674 /* Must not proceed when `bnx2x_handle_drv_info_req' is feasible */ 3675 if (bp->drv_info_mng_owner) 3676 goto out; 3677 3678 if (bp->state != BNX2X_STATE_OPEN) 3679 goto out; 3680 3681 /* Parse ethernet driver version */ 3682 ethver = bnx2x_update_mng_version_utility(DRV_MODULE_VERSION, true); 3683 if (!CNIC_LOADED(bp)) 3684 goto out; 3685 3686 /* Try getting storage driver version via cnic */ 3687 memset(&bp->slowpath->drv_info_to_mcp, 0, 3688 sizeof(union drv_info_to_mcp)); 3689 bnx2x_drv_info_iscsi_stat(bp); 3690 version = bp->slowpath->drv_info_to_mcp.iscsi_stat.version; 3691 iscsiver = bnx2x_update_mng_version_utility(version, false); 3692 3693 memset(&bp->slowpath->drv_info_to_mcp, 0, 3694 sizeof(union drv_info_to_mcp)); 3695 bnx2x_drv_info_fcoe_stat(bp); 3696 version = bp->slowpath->drv_info_to_mcp.fcoe_stat.version; 3697 fcoever = bnx2x_update_mng_version_utility(version, false); 3698 3699out: 3700 SHMEM2_WR(bp, func_os_drv_ver[idx].versions[DRV_PERS_ETHERNET], ethver); 3701 SHMEM2_WR(bp, func_os_drv_ver[idx].versions[DRV_PERS_ISCSI], iscsiver); 3702 SHMEM2_WR(bp, func_os_drv_ver[idx].versions[DRV_PERS_FCOE], fcoever); 3703 3704 mutex_unlock(&bp->drv_info_mutex); 3705 3706 DP(BNX2X_MSG_MCP, "Setting driver version: ETH [%08x] iSCSI [%08x] FCoE [%08x]\n", 3707 ethver, iscsiver, fcoever); 3708} 3709 3710static void bnx2x_oem_event(struct bnx2x *bp, u32 event) 3711{ 3712 u32 cmd_ok, cmd_fail; 3713 3714 /* sanity */ 3715 if (event & DRV_STATUS_DCC_EVENT_MASK && 3716 event & DRV_STATUS_OEM_EVENT_MASK) { 3717 BNX2X_ERR("Received simultaneous events %08x\n", event); 3718 return; 3719 } 3720 3721 if (event & DRV_STATUS_DCC_EVENT_MASK) { 3722 cmd_fail = DRV_MSG_CODE_DCC_FAILURE; 3723 cmd_ok = DRV_MSG_CODE_DCC_OK; 3724 } else /* if (event & DRV_STATUS_OEM_EVENT_MASK) */ { 3725 cmd_fail = DRV_MSG_CODE_OEM_FAILURE; 3726 cmd_ok = DRV_MSG_CODE_OEM_OK; 3727 } 3728 3729 DP(BNX2X_MSG_MCP, "oem_event 0x%x\n", event); 3730 3731 if (event & (DRV_STATUS_DCC_DISABLE_ENABLE_PF | 3732 DRV_STATUS_OEM_DISABLE_ENABLE_PF)) { 3733 /* This is the only place besides the function initialization 3734 * where the bp->flags can change so it is done without any 3735 * locks 3736 */ 3737 if (bp->mf_config[BP_VN(bp)] & FUNC_MF_CFG_FUNC_DISABLED) { 3738 DP(BNX2X_MSG_MCP, "mf_cfg function disabled\n"); 3739 bp->flags |= MF_FUNC_DIS; 3740 3741 bnx2x_e1h_disable(bp); 3742 } else { 3743 DP(BNX2X_MSG_MCP, "mf_cfg function enabled\n"); 3744 bp->flags &= ~MF_FUNC_DIS; 3745 3746 bnx2x_e1h_enable(bp); 3747 } 3748 event &= ~(DRV_STATUS_DCC_DISABLE_ENABLE_PF | 3749 DRV_STATUS_OEM_DISABLE_ENABLE_PF); 3750 } 3751 3752 if (event & (DRV_STATUS_DCC_BANDWIDTH_ALLOCATION | 3753 DRV_STATUS_OEM_BANDWIDTH_ALLOCATION)) { 3754 bnx2x_config_mf_bw(bp); 3755 event &= ~(DRV_STATUS_DCC_BANDWIDTH_ALLOCATION | 3756 DRV_STATUS_OEM_BANDWIDTH_ALLOCATION); 3757 } 3758 3759 /* Report results to MCP */ 3760 if (event) 3761 bnx2x_fw_command(bp, cmd_fail, 0); 3762 else 3763 bnx2x_fw_command(bp, cmd_ok, 0); 3764} 3765 3766/* must be called under the spq lock */ 3767static struct eth_spe *bnx2x_sp_get_next(struct bnx2x *bp) 3768{ 3769 struct eth_spe *next_spe = bp->spq_prod_bd; 3770 3771 if (bp->spq_prod_bd == bp->spq_last_bd) { 3772 bp->spq_prod_bd = bp->spq; 3773 bp->spq_prod_idx = 0; 3774 DP(BNX2X_MSG_SP, "end of spq\n"); 3775 } else { 3776 bp->spq_prod_bd++; 3777 bp->spq_prod_idx++; 3778 } 3779 return next_spe; 3780} 3781 3782/* must be called under the spq lock */ 3783static void bnx2x_sp_prod_update(struct bnx2x *bp) 3784{ 3785 int func = BP_FUNC(bp); 3786 3787 /* 3788 * Make sure that BD data is updated before writing the producer: 3789 * BD data is written to the memory, the producer is read from the 3790 * memory, thus we need a full memory barrier to ensure the ordering. 3791 */ 3792 mb(); 3793 3794 REG_WR16(bp, BAR_XSTRORM_INTMEM + XSTORM_SPQ_PROD_OFFSET(func), 3795 bp->spq_prod_idx); 3796 mmiowb(); 3797} 3798 3799/** 3800 * bnx2x_is_contextless_ramrod - check if the current command ends on EQ 3801 * 3802 * @cmd: command to check 3803 * @cmd_type: command type 3804 */ 3805static bool bnx2x_is_contextless_ramrod(int cmd, int cmd_type) 3806{ 3807 if ((cmd_type == NONE_CONNECTION_TYPE) || 3808 (cmd == RAMROD_CMD_ID_ETH_FORWARD_SETUP) || 3809 (cmd == RAMROD_CMD_ID_ETH_CLASSIFICATION_RULES) || 3810 (cmd == RAMROD_CMD_ID_ETH_FILTER_RULES) || 3811 (cmd == RAMROD_CMD_ID_ETH_MULTICAST_RULES) || 3812 (cmd == RAMROD_CMD_ID_ETH_SET_MAC) || 3813 (cmd == RAMROD_CMD_ID_ETH_RSS_UPDATE)) 3814 return true; 3815 else 3816 return false; 3817} 3818 3819/** 3820 * bnx2x_sp_post - place a single command on an SP ring 3821 * 3822 * @bp: driver handle 3823 * @command: command to place (e.g. SETUP, FILTER_RULES, etc.) 3824 * @cid: SW CID the command is related to 3825 * @data_hi: command private data address (high 32 bits) 3826 * @data_lo: command private data address (low 32 bits) 3827 * @cmd_type: command type (e.g. NONE, ETH) 3828 * 3829 * SP data is handled as if it's always an address pair, thus data fields are 3830 * not swapped to little endian in upper functions. Instead this function swaps 3831 * data as if it's two u32 fields. 3832 */ 3833int bnx2x_sp_post(struct bnx2x *bp, int command, int cid, 3834 u32 data_hi, u32 data_lo, int cmd_type) 3835{ 3836 struct eth_spe *spe; 3837 u16 type; 3838 bool common = bnx2x_is_contextless_ramrod(command, cmd_type); 3839 3840#ifdef BNX2X_STOP_ON_ERROR 3841 if (unlikely(bp->panic)) { 3842 BNX2X_ERR("Can't post SP when there is panic\n"); 3843 return -EIO; 3844 } 3845#endif 3846 3847 spin_lock_bh(&bp->spq_lock); 3848 3849 if (common) { 3850 if (!atomic_read(&bp->eq_spq_left)) { 3851 BNX2X_ERR("BUG! EQ ring full!\n"); 3852 spin_unlock_bh(&bp->spq_lock); 3853 bnx2x_panic(); 3854 return -EBUSY; 3855 } 3856 } else if (!atomic_read(&bp->cq_spq_left)) { 3857 BNX2X_ERR("BUG! SPQ ring full!\n"); 3858 spin_unlock_bh(&bp->spq_lock); 3859 bnx2x_panic(); 3860 return -EBUSY; 3861 } 3862 3863 spe = bnx2x_sp_get_next(bp); 3864 3865 /* CID needs port number to be encoded int it */ 3866 spe->hdr.conn_and_cmd_data = 3867 cpu_to_le32((command << SPE_HDR_CMD_ID_SHIFT) | 3868 HW_CID(bp, cid)); 3869 3870 /* In some cases, type may already contain the func-id 3871 * mainly in SRIOV related use cases, so we add it here only 3872 * if it's not already set. 3873 */ 3874 if (!(cmd_type & SPE_HDR_FUNCTION_ID)) { 3875 type = (cmd_type << SPE_HDR_CONN_TYPE_SHIFT) & 3876 SPE_HDR_CONN_TYPE; 3877 type |= ((BP_FUNC(bp) << SPE_HDR_FUNCTION_ID_SHIFT) & 3878 SPE_HDR_FUNCTION_ID); 3879 } else { 3880 type = cmd_type; 3881 } 3882 3883 spe->hdr.type = cpu_to_le16(type); 3884 3885 spe->data.update_data_addr.hi = cpu_to_le32(data_hi); 3886 spe->data.update_data_addr.lo = cpu_to_le32(data_lo); 3887 3888 /* 3889 * It's ok if the actual decrement is issued towards the memory 3890 * somewhere between the spin_lock and spin_unlock. Thus no 3891 * more explicit memory barrier is needed. 3892 */ 3893 if (common) 3894 atomic_dec(&bp->eq_spq_left); 3895 else 3896 atomic_dec(&bp->cq_spq_left); 3897 3898 DP(BNX2X_MSG_SP, 3899 "SPQE[%x] (%x:%x) (cmd, common?) (%d,%d) hw_cid %x data (%x:%x) type(0x%x) left (CQ, EQ) (%x,%x)\n", 3900 bp->spq_prod_idx, (u32)U64_HI(bp->spq_mapping), 3901 (u32)(U64_LO(bp->spq_mapping) + 3902 (void *)bp->spq_prod_bd - (void *)bp->spq), command, common, 3903 HW_CID(bp, cid), data_hi, data_lo, type, 3904 atomic_read(&bp->cq_spq_left), atomic_read(&bp->eq_spq_left)); 3905 3906 bnx2x_sp_prod_update(bp); 3907 spin_unlock_bh(&bp->spq_lock); 3908 return 0; 3909} 3910 3911/* acquire split MCP access lock register */ 3912static int bnx2x_acquire_alr(struct bnx2x *bp) 3913{ 3914 u32 j, val; 3915 int rc = 0; 3916 3917 might_sleep(); 3918 for (j = 0; j < 1000; j++) { 3919 REG_WR(bp, MCP_REG_MCPR_ACCESS_LOCK, MCPR_ACCESS_LOCK_LOCK); 3920 val = REG_RD(bp, MCP_REG_MCPR_ACCESS_LOCK); 3921 if (val & MCPR_ACCESS_LOCK_LOCK) 3922 break; 3923 3924 usleep_range(5000, 10000); 3925 } 3926 if (!(val & MCPR_ACCESS_LOCK_LOCK)) { 3927 BNX2X_ERR("Cannot acquire MCP access lock register\n"); 3928 rc = -EBUSY; 3929 } 3930 3931 return rc; 3932} 3933 3934/* release split MCP access lock register */ 3935static void bnx2x_release_alr(struct bnx2x *bp) 3936{ 3937 REG_WR(bp, MCP_REG_MCPR_ACCESS_LOCK, 0); 3938} 3939 3940#define BNX2X_DEF_SB_ATT_IDX 0x0001 3941#define BNX2X_DEF_SB_IDX 0x0002 3942 3943static u16 bnx2x_update_dsb_idx(struct bnx2x *bp) 3944{ 3945 struct host_sp_status_block *def_sb = bp->def_status_blk; 3946 u16 rc = 0; 3947 3948 barrier(); /* status block is written to by the chip */ 3949 if (bp->def_att_idx != def_sb->atten_status_block.attn_bits_index) { 3950 bp->def_att_idx = def_sb->atten_status_block.attn_bits_index; 3951 rc |= BNX2X_DEF_SB_ATT_IDX; 3952 } 3953 3954 if (bp->def_idx != def_sb->sp_sb.running_index) { 3955 bp->def_idx = def_sb->sp_sb.running_index; 3956 rc |= BNX2X_DEF_SB_IDX; 3957 } 3958 3959 /* Do not reorder: indices reading should complete before handling */ 3960 barrier(); 3961 return rc; 3962} 3963 3964/* 3965 * slow path service functions 3966 */ 3967 3968static void bnx2x_attn_int_asserted(struct bnx2x *bp, u32 asserted) 3969{ 3970 int port = BP_PORT(bp); 3971 u32 aeu_addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 : 3972 MISC_REG_AEU_MASK_ATTN_FUNC_0; 3973 u32 nig_int_mask_addr = port ? NIG_REG_MASK_INTERRUPT_PORT1 : 3974 NIG_REG_MASK_INTERRUPT_PORT0; 3975 u32 aeu_mask; 3976 u32 nig_mask = 0; 3977 u32 reg_addr; 3978 3979 if (bp->attn_state & asserted) 3980 BNX2X_ERR("IGU ERROR\n"); 3981 3982 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port); 3983 aeu_mask = REG_RD(bp, aeu_addr); 3984 3985 DP(NETIF_MSG_HW, "aeu_mask %x newly asserted %x\n", 3986 aeu_mask, asserted); 3987 aeu_mask &= ~(asserted & 0x3ff); 3988 DP(NETIF_MSG_HW, "new mask %x\n", aeu_mask); 3989 3990 REG_WR(bp, aeu_addr, aeu_mask); 3991 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port); 3992 3993 DP(NETIF_MSG_HW, "attn_state %x\n", bp->attn_state); 3994 bp->attn_state |= asserted; 3995 DP(NETIF_MSG_HW, "new state %x\n", bp->attn_state); 3996 3997 if (asserted & ATTN_HARD_WIRED_MASK) { 3998 if (asserted & ATTN_NIG_FOR_FUNC) { 3999 4000 bnx2x_acquire_phy_lock(bp); 4001 4002 /* save nig interrupt mask */ 4003 nig_mask = REG_RD(bp, nig_int_mask_addr); 4004 4005 /* If nig_mask is not set, no need to call the update 4006 * function. 4007 */ 4008 if (nig_mask) { 4009 REG_WR(bp, nig_int_mask_addr, 0); 4010 4011 bnx2x_link_attn(bp); 4012 } 4013 4014 /* handle unicore attn? */ 4015 } 4016 if (asserted & ATTN_SW_TIMER_4_FUNC) 4017 DP(NETIF_MSG_HW, "ATTN_SW_TIMER_4_FUNC!\n"); 4018 4019 if (asserted & GPIO_2_FUNC) 4020 DP(NETIF_MSG_HW, "GPIO_2_FUNC!\n"); 4021 4022 if (asserted & GPIO_3_FUNC) 4023 DP(NETIF_MSG_HW, "GPIO_3_FUNC!\n"); 4024 4025 if (asserted & GPIO_4_FUNC) 4026 DP(NETIF_MSG_HW, "GPIO_4_FUNC!\n"); 4027 4028 if (port == 0) { 4029 if (asserted & ATTN_GENERAL_ATTN_1) { 4030 DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_1!\n"); 4031 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_1, 0x0); 4032 } 4033 if (asserted & ATTN_GENERAL_ATTN_2) { 4034 DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_2!\n"); 4035 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_2, 0x0); 4036 } 4037 if (asserted & ATTN_GENERAL_ATTN_3) { 4038 DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_3!\n"); 4039 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_3, 0x0); 4040 } 4041 } else { 4042 if (asserted & ATTN_GENERAL_ATTN_4) { 4043 DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_4!\n"); 4044 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_4, 0x0); 4045 } 4046 if (asserted & ATTN_GENERAL_ATTN_5) { 4047 DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_5!\n"); 4048 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_5, 0x0); 4049 } 4050 if (asserted & ATTN_GENERAL_ATTN_6) { 4051 DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_6!\n"); 4052 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_6, 0x0); 4053 } 4054 } 4055 4056 } /* if hardwired */ 4057 4058 if (bp->common.int_block == INT_BLOCK_HC) 4059 reg_addr = (HC_REG_COMMAND_REG + port*32 + 4060 COMMAND_REG_ATTN_BITS_SET); 4061 else 4062 reg_addr = (BAR_IGU_INTMEM + IGU_CMD_ATTN_BIT_SET_UPPER*8); 4063 4064 DP(NETIF_MSG_HW, "about to mask 0x%08x at %s addr 0x%x\n", asserted, 4065 (bp->common.int_block == INT_BLOCK_HC) ? "HC" : "IGU", reg_addr); 4066 REG_WR(bp, reg_addr, asserted); 4067 4068 /* now set back the mask */ 4069 if (asserted & ATTN_NIG_FOR_FUNC) { 4070 /* Verify that IGU ack through BAR was written before restoring 4071 * NIG mask. This loop should exit after 2-3 iterations max. 4072 */ 4073 if (bp->common.int_block != INT_BLOCK_HC) { 4074 u32 cnt = 0, igu_acked; 4075 do { 4076 igu_acked = REG_RD(bp, 4077 IGU_REG_ATTENTION_ACK_BITS); 4078 } while (((igu_acked & ATTN_NIG_FOR_FUNC) == 0) && 4079 (++cnt < MAX_IGU_ATTN_ACK_TO)); 4080 if (!igu_acked) 4081 DP(NETIF_MSG_HW, 4082 "Failed to verify IGU ack on time\n"); 4083 barrier(); 4084 } 4085 REG_WR(bp, nig_int_mask_addr, nig_mask); 4086 bnx2x_release_phy_lock(bp); 4087 } 4088} 4089 4090static void bnx2x_fan_failure(struct bnx2x *bp) 4091{ 4092 int port = BP_PORT(bp); 4093 u32 ext_phy_config; 4094 /* mark the failure */ 4095 ext_phy_config = 4096 SHMEM_RD(bp, 4097 dev_info.port_hw_config[port].external_phy_config); 4098 4099 ext_phy_config &= ~PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK; 4100 ext_phy_config |= PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE; 4101 SHMEM_WR(bp, dev_info.port_hw_config[port].external_phy_config, 4102 ext_phy_config); 4103 4104 /* log the failure */ 4105 netdev_err(bp->dev, "Fan Failure on Network Controller has caused the driver to shutdown the card to prevent permanent damage.\n" 4106 "Please contact OEM Support for assistance\n"); 4107 4108 /* Schedule device reset (unload) 4109 * This is due to some boards consuming sufficient power when driver is 4110 * up to overheat if fan fails. 4111 */ 4112 bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_FAN_FAILURE, 0); 4113} 4114 4115static void bnx2x_attn_int_deasserted0(struct bnx2x *bp, u32 attn) 4116{ 4117 int port = BP_PORT(bp); 4118 int reg_offset; 4119 u32 val; 4120 4121 reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 : 4122 MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0); 4123 4124 if (attn & AEU_INPUTS_ATTN_BITS_SPIO5) { 4125 4126 val = REG_RD(bp, reg_offset); 4127 val &= ~AEU_INPUTS_ATTN_BITS_SPIO5; 4128 REG_WR(bp, reg_offset, val); 4129 4130 BNX2X_ERR("SPIO5 hw attention\n"); 4131 4132 /* Fan failure attention */ 4133 bnx2x_hw_reset_phy(&bp->link_params); 4134 bnx2x_fan_failure(bp); 4135 } 4136 4137 if ((attn & bp->link_vars.aeu_int_mask) && bp->port.pmf) { 4138 bnx2x_acquire_phy_lock(bp); 4139 bnx2x_handle_module_detect_int(&bp->link_params); 4140 bnx2x_release_phy_lock(bp); 4141 } 4142 4143 if (attn & HW_INTERRUT_ASSERT_SET_0) { 4144 4145 val = REG_RD(bp, reg_offset); 4146 val &= ~(attn & HW_INTERRUT_ASSERT_SET_0); 4147 REG_WR(bp, reg_offset, val); 4148 4149 BNX2X_ERR("FATAL HW block attention set0 0x%x\n", 4150 (u32)(attn & HW_INTERRUT_ASSERT_SET_0)); 4151 bnx2x_panic(); 4152 } 4153} 4154 4155static void bnx2x_attn_int_deasserted1(struct bnx2x *bp, u32 attn) 4156{ 4157 u32 val; 4158 4159 if (attn & AEU_INPUTS_ATTN_BITS_DOORBELLQ_HW_INTERRUPT) { 4160 4161 val = REG_RD(bp, DORQ_REG_DORQ_INT_STS_CLR); 4162 BNX2X_ERR("DB hw attention 0x%x\n", val); 4163 /* DORQ discard attention */ 4164 if (val & 0x2) 4165 BNX2X_ERR("FATAL error from DORQ\n"); 4166 } 4167 4168 if (attn & HW_INTERRUT_ASSERT_SET_1) { 4169 4170 int port = BP_PORT(bp); 4171 int reg_offset; 4172 4173 reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_1 : 4174 MISC_REG_AEU_ENABLE1_FUNC_0_OUT_1); 4175 4176 val = REG_RD(bp, reg_offset); 4177 val &= ~(attn & HW_INTERRUT_ASSERT_SET_1); 4178 REG_WR(bp, reg_offset, val); 4179 4180 BNX2X_ERR("FATAL HW block attention set1 0x%x\n", 4181 (u32)(attn & HW_INTERRUT_ASSERT_SET_1)); 4182 bnx2x_panic(); 4183 } 4184} 4185 4186static void bnx2x_attn_int_deasserted2(struct bnx2x *bp, u32 attn) 4187{ 4188 u32 val; 4189 4190 if (attn & AEU_INPUTS_ATTN_BITS_CFC_HW_INTERRUPT) { 4191 4192 val = REG_RD(bp, CFC_REG_CFC_INT_STS_CLR); 4193 BNX2X_ERR("CFC hw attention 0x%x\n", val); 4194 /* CFC error attention */ 4195 if (val & 0x2) 4196 BNX2X_ERR("FATAL error from CFC\n"); 4197 } 4198 4199 if (attn & AEU_INPUTS_ATTN_BITS_PXP_HW_INTERRUPT) { 4200 val = REG_RD(bp, PXP_REG_PXP_INT_STS_CLR_0); 4201 BNX2X_ERR("PXP hw attention-0 0x%x\n", val); 4202 /* RQ_USDMDP_FIFO_OVERFLOW */ 4203 if (val & 0x18000) 4204 BNX2X_ERR("FATAL error from PXP\n"); 4205 4206 if (!CHIP_IS_E1x(bp)) { 4207 val = REG_RD(bp, PXP_REG_PXP_INT_STS_CLR_1); 4208 BNX2X_ERR("PXP hw attention-1 0x%x\n", val); 4209 } 4210 } 4211 4212 if (attn & HW_INTERRUT_ASSERT_SET_2) { 4213 4214 int port = BP_PORT(bp); 4215 int reg_offset; 4216 4217 reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_2 : 4218 MISC_REG_AEU_ENABLE1_FUNC_0_OUT_2); 4219 4220 val = REG_RD(bp, reg_offset); 4221 val &= ~(attn & HW_INTERRUT_ASSERT_SET_2); 4222 REG_WR(bp, reg_offset, val); 4223 4224 BNX2X_ERR("FATAL HW block attention set2 0x%x\n", 4225 (u32)(attn & HW_INTERRUT_ASSERT_SET_2)); 4226 bnx2x_panic(); 4227 } 4228} 4229 4230static void bnx2x_attn_int_deasserted3(struct bnx2x *bp, u32 attn) 4231{ 4232 u32 val; 4233 4234 if (attn & EVEREST_GEN_ATTN_IN_USE_MASK) { 4235 4236 if (attn & BNX2X_PMF_LINK_ASSERT) { 4237 int func = BP_FUNC(bp); 4238 4239 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_12 + func*4, 0); 4240 bnx2x_read_mf_cfg(bp); 4241 bp->mf_config[BP_VN(bp)] = MF_CFG_RD(bp, 4242 func_mf_config[BP_ABS_FUNC(bp)].config); 4243 val = SHMEM_RD(bp, 4244 func_mb[BP_FW_MB_IDX(bp)].drv_status); 4245 4246 if (val & (DRV_STATUS_DCC_EVENT_MASK | 4247 DRV_STATUS_OEM_EVENT_MASK)) 4248 bnx2x_oem_event(bp, 4249 (val & (DRV_STATUS_DCC_EVENT_MASK | 4250 DRV_STATUS_OEM_EVENT_MASK))); 4251 4252 if (val & DRV_STATUS_SET_MF_BW) 4253 bnx2x_set_mf_bw(bp); 4254 4255 if (val & DRV_STATUS_DRV_INFO_REQ) 4256 bnx2x_handle_drv_info_req(bp); 4257 4258 if (val & DRV_STATUS_VF_DISABLED) 4259 bnx2x_schedule_iov_task(bp, 4260 BNX2X_IOV_HANDLE_FLR); 4261 4262 if ((bp->port.pmf == 0) && (val & DRV_STATUS_PMF)) 4263 bnx2x_pmf_update(bp); 4264 4265 if (bp->port.pmf && 4266 (val & DRV_STATUS_DCBX_NEGOTIATION_RESULTS) && 4267 bp->dcbx_enabled > 0) 4268 /* start dcbx state machine */ 4269 bnx2x_dcbx_set_params(bp, 4270 BNX2X_DCBX_STATE_NEG_RECEIVED); 4271 if (val & DRV_STATUS_AFEX_EVENT_MASK) 4272 bnx2x_handle_afex_cmd(bp, 4273 val & DRV_STATUS_AFEX_EVENT_MASK); 4274 if (val & DRV_STATUS_EEE_NEGOTIATION_RESULTS) 4275 bnx2x_handle_eee_event(bp); 4276 4277 if (val & DRV_STATUS_OEM_UPDATE_SVID) 4278 bnx2x_handle_update_svid_cmd(bp); 4279 4280 if (bp->link_vars.periodic_flags & 4281 PERIODIC_FLAGS_LINK_EVENT) { 4282 /* sync with link */ 4283 bnx2x_acquire_phy_lock(bp); 4284 bp->link_vars.periodic_flags &= 4285 ~PERIODIC_FLAGS_LINK_EVENT; 4286 bnx2x_release_phy_lock(bp); 4287 if (IS_MF(bp)) 4288 bnx2x_link_sync_notify(bp); 4289 bnx2x_link_report(bp); 4290 } 4291 /* Always call it here: bnx2x_link_report() will 4292 * prevent the link indication duplication. 4293 */ 4294 bnx2x__link_status_update(bp); 4295 } else if (attn & BNX2X_MC_ASSERT_BITS) { 4296 4297 BNX2X_ERR("MC assert!\n"); 4298 bnx2x_mc_assert(bp); 4299 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_10, 0); 4300 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_9, 0); 4301 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_8, 0); 4302 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_7, 0); 4303 bnx2x_panic(); 4304 4305 } else if (attn & BNX2X_MCP_ASSERT) { 4306 4307 BNX2X_ERR("MCP assert!\n"); 4308 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_11, 0); 4309 bnx2x_fw_dump(bp); 4310 4311 } else 4312 BNX2X_ERR("Unknown HW assert! (attn 0x%x)\n", attn); 4313 } 4314 4315 if (attn & EVEREST_LATCHED_ATTN_IN_USE_MASK) { 4316 BNX2X_ERR("LATCHED attention 0x%08x (masked)\n", attn); 4317 if (attn & BNX2X_GRC_TIMEOUT) { 4318 val = CHIP_IS_E1(bp) ? 0 : 4319 REG_RD(bp, MISC_REG_GRC_TIMEOUT_ATTN); 4320 BNX2X_ERR("GRC time-out 0x%08x\n", val); 4321 } 4322 if (attn & BNX2X_GRC_RSV) { 4323 val = CHIP_IS_E1(bp) ? 0 : 4324 REG_RD(bp, MISC_REG_GRC_RSV_ATTN); 4325 BNX2X_ERR("GRC reserved 0x%08x\n", val); 4326 } 4327 REG_WR(bp, MISC_REG_AEU_CLR_LATCH_SIGNAL, 0x7ff); 4328 } 4329} 4330 4331/* 4332 * Bits map: 4333 * 0-7 - Engine0 load counter. 4334 * 8-15 - Engine1 load counter. 4335 * 16 - Engine0 RESET_IN_PROGRESS bit. 4336 * 17 - Engine1 RESET_IN_PROGRESS bit. 4337 * 18 - Engine0 ONE_IS_LOADED. Set when there is at least one active function 4338 * on the engine 4339 * 19 - Engine1 ONE_IS_LOADED. 4340 * 20 - Chip reset flow bit. When set none-leader must wait for both engines 4341 * leader to complete (check for both RESET_IN_PROGRESS bits and not for 4342 * just the one belonging to its engine). 4343 * 4344 */ 4345#define BNX2X_RECOVERY_GLOB_REG MISC_REG_GENERIC_POR_1 4346 4347#define BNX2X_PATH0_LOAD_CNT_MASK 0x000000ff 4348#define BNX2X_PATH0_LOAD_CNT_SHIFT 0 4349#define BNX2X_PATH1_LOAD_CNT_MASK 0x0000ff00 4350#define BNX2X_PATH1_LOAD_CNT_SHIFT 8 4351#define BNX2X_PATH0_RST_IN_PROG_BIT 0x00010000 4352#define BNX2X_PATH1_RST_IN_PROG_BIT 0x00020000 4353#define BNX2X_GLOBAL_RESET_BIT 0x00040000 4354 4355/* 4356 * Set the GLOBAL_RESET bit. 4357 * 4358 * Should be run under rtnl lock 4359 */ 4360void bnx2x_set_reset_global(struct bnx2x *bp) 4361{ 4362 u32 val; 4363 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); 4364 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); 4365 REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val | BNX2X_GLOBAL_RESET_BIT); 4366 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); 4367} 4368 4369/* 4370 * Clear the GLOBAL_RESET bit. 4371 * 4372 * Should be run under rtnl lock 4373 */ 4374static void bnx2x_clear_reset_global(struct bnx2x *bp) 4375{ 4376 u32 val; 4377 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); 4378 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); 4379 REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val & (~BNX2X_GLOBAL_RESET_BIT)); 4380 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); 4381} 4382 4383/* 4384 * Checks the GLOBAL_RESET bit. 4385 * 4386 * should be run under rtnl lock 4387 */ 4388static bool bnx2x_reset_is_global(struct bnx2x *bp) 4389{ 4390 u32 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); 4391 4392 DP(NETIF_MSG_HW, "GEN_REG_VAL=0x%08x\n", val); 4393 return (val & BNX2X_GLOBAL_RESET_BIT) ? true : false; 4394} 4395 4396/* 4397 * Clear RESET_IN_PROGRESS bit for the current engine. 4398 * 4399 * Should be run under rtnl lock 4400 */ 4401static void bnx2x_set_reset_done(struct bnx2x *bp) 4402{ 4403 u32 val; 4404 u32 bit = BP_PATH(bp) ? 4405 BNX2X_PATH1_RST_IN_PROG_BIT : BNX2X_PATH0_RST_IN_PROG_BIT; 4406 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); 4407 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); 4408 4409 /* Clear the bit */ 4410 val &= ~bit; 4411 REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val); 4412 4413 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); 4414} 4415 4416/* 4417 * Set RESET_IN_PROGRESS for the current engine. 4418 * 4419 * should be run under rtnl lock 4420 */ 4421void bnx2x_set_reset_in_progress(struct bnx2x *bp) 4422{ 4423 u32 val; 4424 u32 bit = BP_PATH(bp) ? 4425 BNX2X_PATH1_RST_IN_PROG_BIT : BNX2X_PATH0_RST_IN_PROG_BIT; 4426 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); 4427 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); 4428 4429 /* Set the bit */ 4430 val |= bit; 4431 REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val); 4432 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); 4433} 4434 4435/* 4436 * Checks the RESET_IN_PROGRESS bit for the given engine. 4437 * should be run under rtnl lock 4438 */ 4439bool bnx2x_reset_is_done(struct bnx2x *bp, int engine) 4440{ 4441 u32 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); 4442 u32 bit = engine ? 4443 BNX2X_PATH1_RST_IN_PROG_BIT : BNX2X_PATH0_RST_IN_PROG_BIT; 4444 4445 /* return false if bit is set */ 4446 return (val & bit) ? false : true; 4447} 4448 4449/* 4450 * set pf load for the current pf. 4451 * 4452 * should be run under rtnl lock 4453 */ 4454void bnx2x_set_pf_load(struct bnx2x *bp) 4455{ 4456 u32 val1, val; 4457 u32 mask = BP_PATH(bp) ? BNX2X_PATH1_LOAD_CNT_MASK : 4458 BNX2X_PATH0_LOAD_CNT_MASK; 4459 u32 shift = BP_PATH(bp) ? BNX2X_PATH1_LOAD_CNT_SHIFT : 4460 BNX2X_PATH0_LOAD_CNT_SHIFT; 4461 4462 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); 4463 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); 4464 4465 DP(NETIF_MSG_IFUP, "Old GEN_REG_VAL=0x%08x\n", val); 4466 4467 /* get the current counter value */ 4468 val1 = (val & mask) >> shift; 4469 4470 /* set bit of that PF */ 4471 val1 |= (1 << bp->pf_num); 4472 4473 /* clear the old value */ 4474 val &= ~mask; 4475 4476 /* set the new one */ 4477 val |= ((val1 << shift) & mask); 4478 4479 REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val); 4480 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); 4481} 4482 4483/** 4484 * bnx2x_clear_pf_load - clear pf load mark 4485 * 4486 * @bp: driver handle 4487 * 4488 * Should be run under rtnl lock. 4489 * Decrements the load counter for the current engine. Returns 4490 * whether other functions are still loaded 4491 */ 4492bool bnx2x_clear_pf_load(struct bnx2x *bp) 4493{ 4494 u32 val1, val; 4495 u32 mask = BP_PATH(bp) ? BNX2X_PATH1_LOAD_CNT_MASK : 4496 BNX2X_PATH0_LOAD_CNT_MASK; 4497 u32 shift = BP_PATH(bp) ? BNX2X_PATH1_LOAD_CNT_SHIFT : 4498 BNX2X_PATH0_LOAD_CNT_SHIFT; 4499 4500 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); 4501 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); 4502 DP(NETIF_MSG_IFDOWN, "Old GEN_REG_VAL=0x%08x\n", val); 4503 4504 /* get the current counter value */ 4505 val1 = (val & mask) >> shift; 4506 4507 /* clear bit of that PF */ 4508 val1 &= ~(1 << bp->pf_num); 4509 4510 /* clear the old value */ 4511 val &= ~mask; 4512 4513 /* set the new one */ 4514 val |= ((val1 << shift) & mask); 4515 4516 REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val); 4517 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); 4518 return val1 != 0; 4519} 4520 4521/* 4522 * Read the load status for the current engine. 4523 * 4524 * should be run under rtnl lock 4525 */ 4526static bool bnx2x_get_load_status(struct bnx2x *bp, int engine) 4527{ 4528 u32 mask = (engine ? BNX2X_PATH1_LOAD_CNT_MASK : 4529 BNX2X_PATH0_LOAD_CNT_MASK); 4530 u32 shift = (engine ? BNX2X_PATH1_LOAD_CNT_SHIFT : 4531 BNX2X_PATH0_LOAD_CNT_SHIFT); 4532 u32 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); 4533 4534 DP(NETIF_MSG_HW | NETIF_MSG_IFUP, "GLOB_REG=0x%08x\n", val); 4535 4536 val = (val & mask) >> shift; 4537 4538 DP(NETIF_MSG_HW | NETIF_MSG_IFUP, "load mask for engine %d = 0x%x\n", 4539 engine, val); 4540 4541 return val != 0; 4542} 4543 4544static void _print_parity(struct bnx2x *bp, u32 reg) 4545{ 4546 pr_cont(" [0x%08x] ", REG_RD(bp, reg)); 4547} 4548 4549static void _print_next_block(int idx, const char *blk) 4550{ 4551 pr_cont("%s%s", idx ? ", " : "", blk); 4552} 4553 4554static bool bnx2x_check_blocks_with_parity0(struct bnx2x *bp, u32 sig, 4555 int *par_num, bool print) 4556{ 4557 u32 cur_bit; 4558 bool res; 4559 int i; 4560 4561 res = false; 4562 4563 for (i = 0; sig; i++) { 4564 cur_bit = (0x1UL << i); 4565 if (sig & cur_bit) { 4566 res |= true; /* Each bit is real error! */ 4567 4568 if (print) { 4569 switch (cur_bit) { 4570 case AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR: 4571 _print_next_block((*par_num)++, "BRB"); 4572 _print_parity(bp, 4573 BRB1_REG_BRB1_PRTY_STS); 4574 break; 4575 case AEU_INPUTS_ATTN_BITS_PARSER_PARITY_ERROR: 4576 _print_next_block((*par_num)++, 4577 "PARSER"); 4578 _print_parity(bp, PRS_REG_PRS_PRTY_STS); 4579 break; 4580 case AEU_INPUTS_ATTN_BITS_TSDM_PARITY_ERROR: 4581 _print_next_block((*par_num)++, "TSDM"); 4582 _print_parity(bp, 4583 TSDM_REG_TSDM_PRTY_STS); 4584 break; 4585 case AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR: 4586 _print_next_block((*par_num)++, 4587 "SEARCHER"); 4588 _print_parity(bp, SRC_REG_SRC_PRTY_STS); 4589 break; 4590 case AEU_INPUTS_ATTN_BITS_TCM_PARITY_ERROR: 4591 _print_next_block((*par_num)++, "TCM"); 4592 _print_parity(bp, TCM_REG_TCM_PRTY_STS); 4593 break; 4594 case AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR: 4595 _print_next_block((*par_num)++, 4596 "TSEMI"); 4597 _print_parity(bp, 4598 TSEM_REG_TSEM_PRTY_STS_0); 4599 _print_parity(bp, 4600 TSEM_REG_TSEM_PRTY_STS_1); 4601 break; 4602 case AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR: 4603 _print_next_block((*par_num)++, "XPB"); 4604 _print_parity(bp, GRCBASE_XPB + 4605 PB_REG_PB_PRTY_STS); 4606 break; 4607 } 4608 } 4609 4610 /* Clear the bit */ 4611 sig &= ~cur_bit; 4612 } 4613 } 4614 4615 return res; 4616} 4617 4618static bool bnx2x_check_blocks_with_parity1(struct bnx2x *bp, u32 sig, 4619 int *par_num, bool *global, 4620 bool print) 4621{ 4622 u32 cur_bit; 4623 bool res; 4624 int i; 4625 4626 res = false; 4627 4628 for (i = 0; sig; i++) { 4629 cur_bit = (0x1UL << i); 4630 if (sig & cur_bit) { 4631 res |= true; /* Each bit is real error! */ 4632 switch (cur_bit) { 4633 case AEU_INPUTS_ATTN_BITS_PBF_PARITY_ERROR: 4634 if (print) { 4635 _print_next_block((*par_num)++, "PBF"); 4636 _print_parity(bp, PBF_REG_PBF_PRTY_STS); 4637 } 4638 break; 4639 case AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR: 4640 if (print) { 4641 _print_next_block((*par_num)++, "QM"); 4642 _print_parity(bp, QM_REG_QM_PRTY_STS); 4643 } 4644 break; 4645 case AEU_INPUTS_ATTN_BITS_TIMERS_PARITY_ERROR: 4646 if (print) { 4647 _print_next_block((*par_num)++, "TM"); 4648 _print_parity(bp, TM_REG_TM_PRTY_STS); 4649 } 4650 break; 4651 case AEU_INPUTS_ATTN_BITS_XSDM_PARITY_ERROR: 4652 if (print) { 4653 _print_next_block((*par_num)++, "XSDM"); 4654 _print_parity(bp, 4655 XSDM_REG_XSDM_PRTY_STS); 4656 } 4657 break; 4658 case AEU_INPUTS_ATTN_BITS_XCM_PARITY_ERROR: 4659 if (print) { 4660 _print_next_block((*par_num)++, "XCM"); 4661 _print_parity(bp, XCM_REG_XCM_PRTY_STS); 4662 } 4663 break; 4664 case AEU_INPUTS_ATTN_BITS_XSEMI_PARITY_ERROR: 4665 if (print) { 4666 _print_next_block((*par_num)++, 4667 "XSEMI"); 4668 _print_parity(bp, 4669 XSEM_REG_XSEM_PRTY_STS_0); 4670 _print_parity(bp, 4671 XSEM_REG_XSEM_PRTY_STS_1); 4672 } 4673 break; 4674 case AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR: 4675 if (print) { 4676 _print_next_block((*par_num)++, 4677 "DOORBELLQ"); 4678 _print_parity(bp, 4679 DORQ_REG_DORQ_PRTY_STS); 4680 } 4681 break; 4682 case AEU_INPUTS_ATTN_BITS_NIG_PARITY_ERROR: 4683 if (print) { 4684 _print_next_block((*par_num)++, "NIG"); 4685 if (CHIP_IS_E1x(bp)) { 4686 _print_parity(bp, 4687 NIG_REG_NIG_PRTY_STS); 4688 } else { 4689 _print_parity(bp, 4690 NIG_REG_NIG_PRTY_STS_0); 4691 _print_parity(bp, 4692 NIG_REG_NIG_PRTY_STS_1); 4693 } 4694 } 4695 break; 4696 case AEU_INPUTS_ATTN_BITS_VAUX_PCI_CORE_PARITY_ERROR: 4697 if (print) 4698 _print_next_block((*par_num)++, 4699 "VAUX PCI CORE"); 4700 *global = true; 4701 break; 4702 case AEU_INPUTS_ATTN_BITS_DEBUG_PARITY_ERROR: 4703 if (print) { 4704 _print_next_block((*par_num)++, 4705 "DEBUG"); 4706 _print_parity(bp, DBG_REG_DBG_PRTY_STS); 4707 } 4708 break; 4709 case AEU_INPUTS_ATTN_BITS_USDM_PARITY_ERROR: 4710 if (print) { 4711 _print_next_block((*par_num)++, "USDM"); 4712 _print_parity(bp, 4713 USDM_REG_USDM_PRTY_STS); 4714 } 4715 break; 4716 case AEU_INPUTS_ATTN_BITS_UCM_PARITY_ERROR: 4717 if (print) { 4718 _print_next_block((*par_num)++, "UCM"); 4719 _print_parity(bp, UCM_REG_UCM_PRTY_STS); 4720 } 4721 break; 4722 case AEU_INPUTS_ATTN_BITS_USEMI_PARITY_ERROR: 4723 if (print) { 4724 _print_next_block((*par_num)++, 4725 "USEMI"); 4726 _print_parity(bp, 4727 USEM_REG_USEM_PRTY_STS_0); 4728 _print_parity(bp, 4729 USEM_REG_USEM_PRTY_STS_1); 4730 } 4731 break; 4732 case AEU_INPUTS_ATTN_BITS_UPB_PARITY_ERROR: 4733 if (print) { 4734 _print_next_block((*par_num)++, "UPB"); 4735 _print_parity(bp, GRCBASE_UPB + 4736 PB_REG_PB_PRTY_STS); 4737 } 4738 break; 4739 case AEU_INPUTS_ATTN_BITS_CSDM_PARITY_ERROR: 4740 if (print) { 4741 _print_next_block((*par_num)++, "CSDM"); 4742 _print_parity(bp, 4743 CSDM_REG_CSDM_PRTY_STS); 4744 } 4745 break; 4746 case AEU_INPUTS_ATTN_BITS_CCM_PARITY_ERROR: 4747 if (print) { 4748 _print_next_block((*par_num)++, "CCM"); 4749 _print_parity(bp, CCM_REG_CCM_PRTY_STS); 4750 } 4751 break; 4752 } 4753 4754 /* Clear the bit */ 4755 sig &= ~cur_bit; 4756 } 4757 } 4758 4759 return res; 4760} 4761 4762static bool bnx2x_check_blocks_with_parity2(struct bnx2x *bp, u32 sig, 4763 int *par_num, bool print) 4764{ 4765 u32 cur_bit; 4766 bool res; 4767 int i; 4768 4769 res = false; 4770 4771 for (i = 0; sig; i++) { 4772 cur_bit = (0x1UL << i); 4773 if (sig & cur_bit) { 4774 res = true; /* Each bit is real error! */ 4775 if (print) { 4776 switch (cur_bit) { 4777 case AEU_INPUTS_ATTN_BITS_CSEMI_PARITY_ERROR: 4778 _print_next_block((*par_num)++, 4779 "CSEMI"); 4780 _print_parity(bp, 4781 CSEM_REG_CSEM_PRTY_STS_0); 4782 _print_parity(bp, 4783 CSEM_REG_CSEM_PRTY_STS_1); 4784 break; 4785 case AEU_INPUTS_ATTN_BITS_PXP_PARITY_ERROR: 4786 _print_next_block((*par_num)++, "PXP"); 4787 _print_parity(bp, PXP_REG_PXP_PRTY_STS); 4788 _print_parity(bp, 4789 PXP2_REG_PXP2_PRTY_STS_0); 4790 _print_parity(bp, 4791 PXP2_REG_PXP2_PRTY_STS_1); 4792 break; 4793 case AEU_IN_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR: 4794 _print_next_block((*par_num)++, 4795 "PXPPCICLOCKCLIENT"); 4796 break; 4797 case AEU_INPUTS_ATTN_BITS_CFC_PARITY_ERROR: 4798 _print_next_block((*par_num)++, "CFC"); 4799 _print_parity(bp, 4800 CFC_REG_CFC_PRTY_STS); 4801 break; 4802 case AEU_INPUTS_ATTN_BITS_CDU_PARITY_ERROR: 4803 _print_next_block((*par_num)++, "CDU"); 4804 _print_parity(bp, CDU_REG_CDU_PRTY_STS); 4805 break; 4806 case AEU_INPUTS_ATTN_BITS_DMAE_PARITY_ERROR: 4807 _print_next_block((*par_num)++, "DMAE"); 4808 _print_parity(bp, 4809 DMAE_REG_DMAE_PRTY_STS); 4810 break; 4811 case AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR: 4812 _print_next_block((*par_num)++, "IGU"); 4813 if (CHIP_IS_E1x(bp)) 4814 _print_parity(bp, 4815 HC_REG_HC_PRTY_STS); 4816 else 4817 _print_parity(bp, 4818 IGU_REG_IGU_PRTY_STS); 4819 break; 4820 case AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR: 4821 _print_next_block((*par_num)++, "MISC"); 4822 _print_parity(bp, 4823 MISC_REG_MISC_PRTY_STS); 4824 break; 4825 } 4826 } 4827 4828 /* Clear the bit */ 4829 sig &= ~cur_bit; 4830 } 4831 } 4832 4833 return res; 4834} 4835 4836static bool bnx2x_check_blocks_with_parity3(struct bnx2x *bp, u32 sig, 4837 int *par_num, bool *global, 4838 bool print) 4839{ 4840 bool res = false; 4841 u32 cur_bit; 4842 int i; 4843 4844 for (i = 0; sig; i++) { 4845 cur_bit = (0x1UL << i); 4846 if (sig & cur_bit) { 4847 switch (cur_bit) { 4848 case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY: 4849 if (print) 4850 _print_next_block((*par_num)++, 4851 "MCP ROM"); 4852 *global = true; 4853 res = true; 4854 break; 4855 case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY: 4856 if (print) 4857 _print_next_block((*par_num)++, 4858 "MCP UMP RX"); 4859 *global = true; 4860 res = true; 4861 break; 4862 case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY: 4863 if (print) 4864 _print_next_block((*par_num)++, 4865 "MCP UMP TX"); 4866 *global = true; 4867 res = true; 4868 break; 4869 case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY: 4870 if (print) 4871 _print_next_block((*par_num)++, 4872 "MCP SCPAD"); 4873 /* clear latched SCPAD PATIRY from MCP */ 4874 REG_WR(bp, MISC_REG_AEU_CLR_LATCH_SIGNAL, 4875 1UL << 10); 4876 break; 4877 } 4878 4879 /* Clear the bit */ 4880 sig &= ~cur_bit; 4881 } 4882 } 4883 4884 return res; 4885} 4886 4887static bool bnx2x_check_blocks_with_parity4(struct bnx2x *bp, u32 sig, 4888 int *par_num, bool print) 4889{ 4890 u32 cur_bit; 4891 bool res; 4892 int i; 4893 4894 res = false; 4895 4896 for (i = 0; sig; i++) { 4897 cur_bit = (0x1UL << i); 4898 if (sig & cur_bit) { 4899 res = true; /* Each bit is real error! */ 4900 if (print) { 4901 switch (cur_bit) { 4902 case AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR: 4903 _print_next_block((*par_num)++, 4904 "PGLUE_B"); 4905 _print_parity(bp, 4906 PGLUE_B_REG_PGLUE_B_PRTY_STS); 4907 break; 4908 case AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR: 4909 _print_next_block((*par_num)++, "ATC"); 4910 _print_parity(bp, 4911 ATC_REG_ATC_PRTY_STS); 4912 break; 4913 } 4914 } 4915 /* Clear the bit */ 4916 sig &= ~cur_bit; 4917 } 4918 } 4919 4920 return res; 4921} 4922 4923static bool bnx2x_parity_attn(struct bnx2x *bp, bool *global, bool print, 4924 u32 *sig) 4925{ 4926 bool res = false; 4927 4928 if ((sig[0] & HW_PRTY_ASSERT_SET_0) || 4929 (sig[1] & HW_PRTY_ASSERT_SET_1) || 4930 (sig[2] & HW_PRTY_ASSERT_SET_2) || 4931 (sig[3] & HW_PRTY_ASSERT_SET_3) || 4932 (sig[4] & HW_PRTY_ASSERT_SET_4)) { 4933 int par_num = 0; 4934 DP(NETIF_MSG_HW, "Was parity error: HW block parity attention:\n" 4935 "[0]:0x%08x [1]:0x%08x [2]:0x%08x [3]:0x%08x [4]:0x%08x\n", 4936 sig[0] & HW_PRTY_ASSERT_SET_0, 4937 sig[1] & HW_PRTY_ASSERT_SET_1, 4938 sig[2] & HW_PRTY_ASSERT_SET_2, 4939 sig[3] & HW_PRTY_ASSERT_SET_3, 4940 sig[4] & HW_PRTY_ASSERT_SET_4); 4941 if (print) 4942 netdev_err(bp->dev, 4943 "Parity errors detected in blocks: "); 4944 res |= bnx2x_check_blocks_with_parity0(bp, 4945 sig[0] & HW_PRTY_ASSERT_SET_0, &par_num, print); 4946 res |= bnx2x_check_blocks_with_parity1(bp, 4947 sig[1] & HW_PRTY_ASSERT_SET_1, &par_num, global, print); 4948 res |= bnx2x_check_blocks_with_parity2(bp, 4949 sig[2] & HW_PRTY_ASSERT_SET_2, &par_num, print); 4950 res |= bnx2x_check_blocks_with_parity3(bp, 4951 sig[3] & HW_PRTY_ASSERT_SET_3, &par_num, global, print); 4952 res |= bnx2x_check_blocks_with_parity4(bp, 4953 sig[4] & HW_PRTY_ASSERT_SET_4, &par_num, print); 4954 4955 if (print) 4956 pr_cont("\n"); 4957 } 4958 4959 return res; 4960} 4961 4962/** 4963 * bnx2x_chk_parity_attn - checks for parity attentions. 4964 * 4965 * @bp: driver handle 4966 * @global: true if there was a global attention 4967 * @print: show parity attention in syslog 4968 */ 4969bool bnx2x_chk_parity_attn(struct bnx2x *bp, bool *global, bool print) 4970{ 4971 struct attn_route attn = { {0} }; 4972 int port = BP_PORT(bp); 4973 4974 attn.sig[0] = REG_RD(bp, 4975 MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 + 4976 port*4); 4977 attn.sig[1] = REG_RD(bp, 4978 MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 + 4979 port*4); 4980 attn.sig[2] = REG_RD(bp, 4981 MISC_REG_AEU_AFTER_INVERT_3_FUNC_0 + 4982 port*4); 4983 attn.sig[3] = REG_RD(bp, 4984 MISC_REG_AEU_AFTER_INVERT_4_FUNC_0 + 4985 port*4); 4986 /* Since MCP attentions can't be disabled inside the block, we need to 4987 * read AEU registers to see whether they're currently disabled 4988 */ 4989 attn.sig[3] &= ((REG_RD(bp, 4990 !port ? MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0 4991 : MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0) & 4992 MISC_AEU_ENABLE_MCP_PRTY_BITS) | 4993 ~MISC_AEU_ENABLE_MCP_PRTY_BITS); 4994 4995 if (!CHIP_IS_E1x(bp)) 4996 attn.sig[4] = REG_RD(bp, 4997 MISC_REG_AEU_AFTER_INVERT_5_FUNC_0 + 4998 port*4); 4999 5000 return bnx2x_parity_attn(bp, global, print, attn.sig); 5001} 5002 5003static void bnx2x_attn_int_deasserted4(struct bnx2x *bp, u32 attn) 5004{ 5005 u32 val; 5006 if (attn & AEU_INPUTS_ATTN_BITS_PGLUE_HW_INTERRUPT) { 5007 5008 val = REG_RD(bp, PGLUE_B_REG_PGLUE_B_INT_STS_CLR); 5009 BNX2X_ERR("PGLUE hw attention 0x%x\n", val); 5010 if (val & PGLUE_B_PGLUE_B_INT_STS_REG_ADDRESS_ERROR) 5011 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_ADDRESS_ERROR\n"); 5012 if (val & PGLUE_B_PGLUE_B_INT_STS_REG_INCORRECT_RCV_BEHAVIOR) 5013 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_INCORRECT_RCV_BEHAVIOR\n"); 5014 if (val & PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN) 5015 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN\n"); 5016 if (val & PGLUE_B_PGLUE_B_INT_STS_REG_VF_LENGTH_VIOLATION_ATTN) 5017 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_VF_LENGTH_VIOLATION_ATTN\n"); 5018 if (val & 5019 PGLUE_B_PGLUE_B_INT_STS_REG_VF_GRC_SPACE_VIOLATION_ATTN) 5020 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_VF_GRC_SPACE_VIOLATION_ATTN\n"); 5021 if (val & 5022 PGLUE_B_PGLUE_B_INT_STS_REG_VF_MSIX_BAR_VIOLATION_ATTN) 5023 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_VF_MSIX_BAR_VIOLATION_ATTN\n"); 5024 if (val & PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_ERROR_ATTN) 5025 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_ERROR_ATTN\n"); 5026 if (val & PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_IN_TWO_RCBS_ATTN) 5027 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_IN_TWO_RCBS_ATTN\n"); 5028 if (val & PGLUE_B_PGLUE_B_INT_STS_REG_CSSNOOP_FIFO_OVERFLOW) 5029 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_CSSNOOP_FIFO_OVERFLOW\n"); 5030 } 5031 if (attn & AEU_INPUTS_ATTN_BITS_ATC_HW_INTERRUPT) { 5032 val = REG_RD(bp, ATC_REG_ATC_INT_STS_CLR); 5033 BNX2X_ERR("ATC hw attention 0x%x\n", val); 5034 if (val & ATC_ATC_INT_STS_REG_ADDRESS_ERROR) 5035 BNX2X_ERR("ATC_ATC_INT_STS_REG_ADDRESS_ERROR\n"); 5036 if (val & ATC_ATC_INT_STS_REG_ATC_TCPL_TO_NOT_PEND) 5037 BNX2X_ERR("ATC_ATC_INT_STS_REG_ATC_TCPL_TO_NOT_PEND\n"); 5038 if (val & ATC_ATC_INT_STS_REG_ATC_GPA_MULTIPLE_HITS) 5039 BNX2X_ERR("ATC_ATC_INT_STS_REG_ATC_GPA_MULTIPLE_HITS\n"); 5040 if (val & ATC_ATC_INT_STS_REG_ATC_RCPL_TO_EMPTY_CNT) 5041 BNX2X_ERR("ATC_ATC_INT_STS_REG_ATC_RCPL_TO_EMPTY_CNT\n"); 5042 if (val & ATC_ATC_INT_STS_REG_ATC_TCPL_ERROR) 5043 BNX2X_ERR("ATC_ATC_INT_STS_REG_ATC_TCPL_ERROR\n"); 5044 if (val & ATC_ATC_INT_STS_REG_ATC_IREQ_LESS_THAN_STU) 5045 BNX2X_ERR("ATC_ATC_INT_STS_REG_ATC_IREQ_LESS_THAN_STU\n"); 5046 } 5047 5048 if (attn & (AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR | 5049 AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR)) { 5050 BNX2X_ERR("FATAL parity attention set4 0x%x\n", 5051 (u32)(attn & (AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR | 5052 AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR))); 5053 } 5054} 5055 5056static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted) 5057{ 5058 struct attn_route attn, *group_mask; 5059 int port = BP_PORT(bp); 5060 int index; 5061 u32 reg_addr; 5062 u32 val; 5063 u32 aeu_mask; 5064 bool global = false; 5065 5066 /* need to take HW lock because MCP or other port might also 5067 try to handle this event */ 5068 bnx2x_acquire_alr(bp); 5069 5070 if (bnx2x_chk_parity_attn(bp, &global, true)) { 5071#ifndef BNX2X_STOP_ON_ERROR 5072 bp->recovery_state = BNX2X_RECOVERY_INIT; 5073 schedule_delayed_work(&bp->sp_rtnl_task, 0); 5074 /* Disable HW interrupts */ 5075 bnx2x_int_disable(bp); 5076 /* In case of parity errors don't handle attentions so that 5077 * other function would "see" parity errors. 5078 */ 5079#else 5080 bnx2x_panic(); 5081#endif 5082 bnx2x_release_alr(bp); 5083 return; 5084 } 5085 5086 attn.sig[0] = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 + port*4); 5087 attn.sig[1] = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 + port*4); 5088 attn.sig[2] = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_3_FUNC_0 + port*4); 5089 attn.sig[3] = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_4_FUNC_0 + port*4); 5090 if (!CHIP_IS_E1x(bp)) 5091 attn.sig[4] = 5092 REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_5_FUNC_0 + port*4); 5093 else 5094 attn.sig[4] = 0; 5095 5096 DP(NETIF_MSG_HW, "attn: %08x %08x %08x %08x %08x\n", 5097 attn.sig[0], attn.sig[1], attn.sig[2], attn.sig[3], attn.sig[4]); 5098 5099 for (index = 0; index < MAX_DYNAMIC_ATTN_GRPS; index++) { 5100 if (deasserted & (1 << index)) { 5101 group_mask = &bp->attn_group[index]; 5102 5103 DP(NETIF_MSG_HW, "group[%d]: %08x %08x %08x %08x %08x\n", 5104 index, 5105 group_mask->sig[0], group_mask->sig[1], 5106 group_mask->sig[2], group_mask->sig[3], 5107 group_mask->sig[4]); 5108 5109 bnx2x_attn_int_deasserted4(bp, 5110 attn.sig[4] & group_mask->sig[4]); 5111 bnx2x_attn_int_deasserted3(bp, 5112 attn.sig[3] & group_mask->sig[3]); 5113 bnx2x_attn_int_deasserted1(bp, 5114 attn.sig[1] & group_mask->sig[1]); 5115 bnx2x_attn_int_deasserted2(bp, 5116 attn.sig[2] & group_mask->sig[2]); 5117 bnx2x_attn_int_deasserted0(bp, 5118 attn.sig[0] & group_mask->sig[0]); 5119 } 5120 } 5121 5122 bnx2x_release_alr(bp); 5123 5124 if (bp->common.int_block == INT_BLOCK_HC) 5125 reg_addr = (HC_REG_COMMAND_REG + port*32 + 5126 COMMAND_REG_ATTN_BITS_CLR); 5127 else 5128 reg_addr = (BAR_IGU_INTMEM + IGU_CMD_ATTN_BIT_CLR_UPPER*8); 5129 5130 val = ~deasserted; 5131 DP(NETIF_MSG_HW, "about to mask 0x%08x at %s addr 0x%x\n", val, 5132 (bp->common.int_block == INT_BLOCK_HC) ? "HC" : "IGU", reg_addr); 5133 REG_WR(bp, reg_addr, val); 5134 5135 if (~bp->attn_state & deasserted) 5136 BNX2X_ERR("IGU ERROR\n"); 5137 5138 reg_addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 : 5139 MISC_REG_AEU_MASK_ATTN_FUNC_0; 5140 5141 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port); 5142 aeu_mask = REG_RD(bp, reg_addr); 5143 5144 DP(NETIF_MSG_HW, "aeu_mask %x newly deasserted %x\n", 5145 aeu_mask, deasserted); 5146 aeu_mask |= (deasserted & 0x3ff); 5147 DP(NETIF_MSG_HW, "new mask %x\n", aeu_mask); 5148 5149 REG_WR(bp, reg_addr, aeu_mask); 5150 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port); 5151 5152 DP(NETIF_MSG_HW, "attn_state %x\n", bp->attn_state); 5153 bp->attn_state &= ~deasserted; 5154 DP(NETIF_MSG_HW, "new state %x\n", bp->attn_state); 5155} 5156 5157static void bnx2x_attn_int(struct bnx2x *bp) 5158{ 5159 /* read local copy of bits */ 5160 u32 attn_bits = le32_to_cpu(bp->def_status_blk->atten_status_block. 5161 attn_bits); 5162 u32 attn_ack = le32_to_cpu(bp->def_status_blk->atten_status_block. 5163 attn_bits_ack); 5164 u32 attn_state = bp->attn_state; 5165 5166 /* look for changed bits */ 5167 u32 asserted = attn_bits & ~attn_ack & ~attn_state; 5168 u32 deasserted = ~attn_bits & attn_ack & attn_state; 5169 5170 DP(NETIF_MSG_HW, 5171 "attn_bits %x attn_ack %x asserted %x deasserted %x\n", 5172 attn_bits, attn_ack, asserted, deasserted); 5173 5174 if (~(attn_bits ^ attn_ack) & (attn_bits ^ attn_state)) 5175 BNX2X_ERR("BAD attention state\n"); 5176 5177 /* handle bits that were raised */ 5178 if (asserted) 5179 bnx2x_attn_int_asserted(bp, asserted); 5180 5181 if (deasserted) 5182 bnx2x_attn_int_deasserted(bp, deasserted); 5183} 5184 5185void bnx2x_igu_ack_sb(struct bnx2x *bp, u8 igu_sb_id, u8 segment, 5186 u16 index, u8 op, u8 update) 5187{ 5188 u32 igu_addr = bp->igu_base_addr; 5189 igu_addr += (IGU_CMD_INT_ACK_BASE + igu_sb_id)*8; 5190 bnx2x_igu_ack_sb_gen(bp, igu_sb_id, segment, index, op, update, 5191 igu_addr); 5192} 5193 5194static void bnx2x_update_eq_prod(struct bnx2x *bp, u16 prod) 5195{ 5196 /* No memory barriers */ 5197 storm_memset_eq_prod(bp, prod, BP_FUNC(bp)); 5198 mmiowb(); /* keep prod updates ordered */ 5199} 5200 5201static int bnx2x_cnic_handle_cfc_del(struct bnx2x *bp, u32 cid, 5202 union event_ring_elem *elem) 5203{ 5204 u8 err = elem->message.error; 5205 5206 if (!bp->cnic_eth_dev.starting_cid || 5207 (cid < bp->cnic_eth_dev.starting_cid && 5208 cid != bp->cnic_eth_dev.iscsi_l2_cid)) 5209 return 1; 5210 5211 DP(BNX2X_MSG_SP, "got delete ramrod for CNIC CID %d\n", cid); 5212 5213 if (unlikely(err)) { 5214 5215 BNX2X_ERR("got delete ramrod for CNIC CID %d with error!\n", 5216 cid); 5217 bnx2x_panic_dump(bp, false); 5218 } 5219 bnx2x_cnic_cfc_comp(bp, cid, err); 5220 return 0; 5221} 5222 5223static void bnx2x_handle_mcast_eqe(struct bnx2x *bp) 5224{ 5225 struct bnx2x_mcast_ramrod_params rparam; 5226 int rc; 5227 5228 memset(&rparam, 0, sizeof(rparam)); 5229 5230 rparam.mcast_obj = &bp->mcast_obj; 5231 5232 netif_addr_lock_bh(bp->dev); 5233 5234 /* Clear pending state for the last command */ 5235 bp->mcast_obj.raw.clear_pending(&bp->mcast_obj.raw); 5236 5237 /* If there are pending mcast commands - send them */ 5238 if (bp->mcast_obj.check_pending(&bp->mcast_obj)) { 5239 rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_CONT); 5240 if (rc < 0) 5241 BNX2X_ERR("Failed to send pending mcast commands: %d\n", 5242 rc); 5243 } 5244 5245 netif_addr_unlock_bh(bp->dev); 5246} 5247 5248static void bnx2x_handle_classification_eqe(struct bnx2x *bp, 5249 union event_ring_elem *elem) 5250{ 5251 unsigned long ramrod_flags = 0; 5252 int rc = 0; 5253 u32 cid = elem->message.data.eth_event.echo & BNX2X_SWCID_MASK; 5254 struct bnx2x_vlan_mac_obj *vlan_mac_obj; 5255 5256 /* Always push next commands out, don't wait here */ 5257 __set_bit(RAMROD_CONT, &ramrod_flags); 5258 5259 switch (le32_to_cpu((__force __le32)elem->message.data.eth_event.echo) 5260 >> BNX2X_SWCID_SHIFT) { 5261 case BNX2X_FILTER_MAC_PENDING: 5262 DP(BNX2X_MSG_SP, "Got SETUP_MAC completions\n"); 5263 if (CNIC_LOADED(bp) && (cid == BNX2X_ISCSI_ETH_CID(bp))) 5264 vlan_mac_obj = &bp->iscsi_l2_mac_obj; 5265 else 5266 vlan_mac_obj = &bp->sp_objs[cid].mac_obj; 5267 5268 break; 5269 case BNX2X_FILTER_MCAST_PENDING: 5270 DP(BNX2X_MSG_SP, "Got SETUP_MCAST completions\n"); 5271 /* This is only relevant for 57710 where multicast MACs are 5272 * configured as unicast MACs using the same ramrod. 5273 */ 5274 bnx2x_handle_mcast_eqe(bp); 5275 return; 5276 default: 5277 BNX2X_ERR("Unsupported classification command: %d\n", 5278 elem->message.data.eth_event.echo); 5279 return; 5280 } 5281 5282 rc = vlan_mac_obj->complete(bp, vlan_mac_obj, elem, &ramrod_flags); 5283 5284 if (rc < 0) 5285 BNX2X_ERR("Failed to schedule new commands: %d\n", rc); 5286 else if (rc > 0) 5287 DP(BNX2X_MSG_SP, "Scheduled next pending commands...\n"); 5288} 5289 5290static void bnx2x_set_iscsi_eth_rx_mode(struct bnx2x *bp, bool start); 5291 5292static void bnx2x_handle_rx_mode_eqe(struct bnx2x *bp) 5293{ 5294 netif_addr_lock_bh(bp->dev); 5295 5296 clear_bit(BNX2X_FILTER_RX_MODE_PENDING, &bp->sp_state); 5297 5298 /* Send rx_mode command again if was requested */ 5299 if (test_and_clear_bit(BNX2X_FILTER_RX_MODE_SCHED, &bp->sp_state)) 5300 bnx2x_set_storm_rx_mode(bp); 5301 else if (test_and_clear_bit(BNX2X_FILTER_ISCSI_ETH_START_SCHED, 5302 &bp->sp_state)) 5303 bnx2x_set_iscsi_eth_rx_mode(bp, true); 5304 else if (test_and_clear_bit(BNX2X_FILTER_ISCSI_ETH_STOP_SCHED, 5305 &bp->sp_state)) 5306 bnx2x_set_iscsi_eth_rx_mode(bp, false); 5307 5308 netif_addr_unlock_bh(bp->dev); 5309} 5310 5311static void bnx2x_after_afex_vif_lists(struct bnx2x *bp, 5312 union event_ring_elem *elem) 5313{ 5314 if (elem->message.data.vif_list_event.echo == VIF_LIST_RULE_GET) { 5315 DP(BNX2X_MSG_SP, 5316 "afex: ramrod completed VIF LIST_GET, addrs 0x%x\n", 5317 elem->message.data.vif_list_event.func_bit_map); 5318 bnx2x_fw_command(bp, DRV_MSG_CODE_AFEX_LISTGET_ACK, 5319 elem->message.data.vif_list_event.func_bit_map); 5320 } else if (elem->message.data.vif_list_event.echo == 5321 VIF_LIST_RULE_SET) { 5322 DP(BNX2X_MSG_SP, "afex: ramrod completed VIF LIST_SET\n"); 5323 bnx2x_fw_command(bp, DRV_MSG_CODE_AFEX_LISTSET_ACK, 0); 5324 } 5325} 5326 5327/* called with rtnl_lock */ 5328static void bnx2x_after_function_update(struct bnx2x *bp) 5329{ 5330 int q, rc; 5331 struct bnx2x_fastpath *fp; 5332 struct bnx2x_queue_state_params queue_params = {NULL}; 5333 struct bnx2x_queue_update_params *q_update_params = 5334 &queue_params.params.update; 5335 5336 /* Send Q update command with afex vlan removal values for all Qs */ 5337 queue_params.cmd = BNX2X_Q_CMD_UPDATE; 5338 5339 /* set silent vlan removal values according to vlan mode */ 5340 __set_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM_CHNG, 5341 &q_update_params->update_flags); 5342 __set_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM, 5343 &q_update_params->update_flags); 5344 __set_bit(RAMROD_COMP_WAIT, &queue_params.ramrod_flags); 5345 5346 /* in access mode mark mask and value are 0 to strip all vlans */ 5347 if (bp->afex_vlan_mode == FUNC_MF_CFG_AFEX_VLAN_ACCESS_MODE) { 5348 q_update_params->silent_removal_value = 0; 5349 q_update_params->silent_removal_mask = 0; 5350 } else { 5351 q_update_params->silent_removal_value = 5352 (bp->afex_def_vlan_tag & VLAN_VID_MASK); 5353 q_update_params->silent_removal_mask = VLAN_VID_MASK; 5354 } 5355 5356 for_each_eth_queue(bp, q) { 5357 /* Set the appropriate Queue object */ 5358 fp = &bp->fp[q]; 5359 queue_params.q_obj = &bnx2x_sp_obj(bp, fp).q_obj; 5360 5361 /* send the ramrod */ 5362 rc = bnx2x_queue_state_change(bp, &queue_params); 5363 if (rc < 0) 5364 BNX2X_ERR("Failed to config silent vlan rem for Q %d\n", 5365 q); 5366 } 5367 5368 if (!NO_FCOE(bp) && CNIC_ENABLED(bp)) { 5369 fp = &bp->fp[FCOE_IDX(bp)]; 5370 queue_params.q_obj = &bnx2x_sp_obj(bp, fp).q_obj; 5371 5372 /* clear pending completion bit */ 5373 __clear_bit(RAMROD_COMP_WAIT, &queue_params.ramrod_flags); 5374 5375 /* mark latest Q bit */ 5376 smp_mb__before_atomic(); 5377 set_bit(BNX2X_AFEX_FCOE_Q_UPDATE_PENDING, &bp->sp_state); 5378 smp_mb__after_atomic(); 5379 5380 /* send Q update ramrod for FCoE Q */ 5381 rc = bnx2x_queue_state_change(bp, &queue_params); 5382 if (rc < 0) 5383 BNX2X_ERR("Failed to config silent vlan rem for Q %d\n", 5384 q); 5385 } else { 5386 /* If no FCoE ring - ACK MCP now */ 5387 bnx2x_link_report(bp); 5388 bnx2x_fw_command(bp, DRV_MSG_CODE_AFEX_VIFSET_ACK, 0); 5389 } 5390} 5391 5392static struct bnx2x_queue_sp_obj *bnx2x_cid_to_q_obj( 5393 struct bnx2x *bp, u32 cid) 5394{ 5395 DP(BNX2X_MSG_SP, "retrieving fp from cid %d\n", cid); 5396 5397 if (CNIC_LOADED(bp) && (cid == BNX2X_FCOE_ETH_CID(bp))) 5398 return &bnx2x_fcoe_sp_obj(bp, q_obj); 5399 else 5400 return &bp->sp_objs[CID_TO_FP(cid, bp)].q_obj; 5401} 5402 5403static void bnx2x_eq_int(struct bnx2x *bp) 5404{ 5405 u16 hw_cons, sw_cons, sw_prod; 5406 union event_ring_elem *elem; 5407 u8 echo; 5408 u32 cid; 5409 u8 opcode; 5410 int rc, spqe_cnt = 0; 5411 struct bnx2x_queue_sp_obj *q_obj; 5412 struct bnx2x_func_sp_obj *f_obj = &bp->func_obj; 5413 struct bnx2x_raw_obj *rss_raw = &bp->rss_conf_obj.raw; 5414 5415 hw_cons = le16_to_cpu(*bp->eq_cons_sb); 5416 5417 /* The hw_cos range is 1-255, 257 - the sw_cons range is 0-254, 256. 5418 * when we get the next-page we need to adjust so the loop 5419 * condition below will be met. The next element is the size of a 5420 * regular element and hence incrementing by 1 5421 */ 5422 if ((hw_cons & EQ_DESC_MAX_PAGE) == EQ_DESC_MAX_PAGE) 5423 hw_cons++; 5424 5425 /* This function may never run in parallel with itself for a 5426 * specific bp, thus there is no need in "paired" read memory 5427 * barrier here. 5428 */ 5429 sw_cons = bp->eq_cons; 5430 sw_prod = bp->eq_prod; 5431 5432 DP(BNX2X_MSG_SP, "EQ: hw_cons %u sw_cons %u bp->eq_spq_left %x\n", 5433 hw_cons, sw_cons, atomic_read(&bp->eq_spq_left)); 5434 5435 for (; sw_cons != hw_cons; 5436 sw_prod = NEXT_EQ_IDX(sw_prod), sw_cons = NEXT_EQ_IDX(sw_cons)) { 5437 5438 elem = &bp->eq_ring[EQ_DESC(sw_cons)]; 5439 5440 rc = bnx2x_iov_eq_sp_event(bp, elem); 5441 if (!rc) { 5442 DP(BNX2X_MSG_IOV, "bnx2x_iov_eq_sp_event returned %d\n", 5443 rc); 5444 goto next_spqe; 5445 } 5446 5447 /* elem CID originates from FW; actually LE */ 5448 cid = SW_CID((__force __le32) 5449 elem->message.data.cfc_del_event.cid); 5450 opcode = elem->message.opcode; 5451 5452 /* handle eq element */ 5453 switch (opcode) { 5454 case EVENT_RING_OPCODE_VF_PF_CHANNEL: 5455 bnx2x_vf_mbx_schedule(bp, 5456 &elem->message.data.vf_pf_event); 5457 continue; 5458 5459 case EVENT_RING_OPCODE_STAT_QUERY: 5460 DP_AND((BNX2X_MSG_SP | BNX2X_MSG_STATS), 5461 "got statistics comp event %d\n", 5462 bp->stats_comp++); 5463 /* nothing to do with stats comp */ 5464 goto next_spqe; 5465 5466 case EVENT_RING_OPCODE_CFC_DEL: 5467 /* handle according to cid range */ 5468 /* 5469 * we may want to verify here that the bp state is 5470 * HALTING 5471 */ 5472 DP(BNX2X_MSG_SP, 5473 "got delete ramrod for MULTI[%d]\n", cid); 5474 5475 if (CNIC_LOADED(bp) && 5476 !bnx2x_cnic_handle_cfc_del(bp, cid, elem)) 5477 goto next_spqe; 5478 5479 q_obj = bnx2x_cid_to_q_obj(bp, cid); 5480 5481 if (q_obj->complete_cmd(bp, q_obj, BNX2X_Q_CMD_CFC_DEL)) 5482 break; 5483 5484 goto next_spqe; 5485 5486 case EVENT_RING_OPCODE_STOP_TRAFFIC: 5487 DP(BNX2X_MSG_SP | BNX2X_MSG_DCB, "got STOP TRAFFIC\n"); 5488 bnx2x_dcbx_set_params(bp, BNX2X_DCBX_STATE_TX_PAUSED); 5489 if (f_obj->complete_cmd(bp, f_obj, 5490 BNX2X_F_CMD_TX_STOP)) 5491 break; 5492 goto next_spqe; 5493 5494 case EVENT_RING_OPCODE_START_TRAFFIC: 5495 DP(BNX2X_MSG_SP | BNX2X_MSG_DCB, "got START TRAFFIC\n"); 5496 bnx2x_dcbx_set_params(bp, BNX2X_DCBX_STATE_TX_RELEASED); 5497 if (f_obj->complete_cmd(bp, f_obj, 5498 BNX2X_F_CMD_TX_START)) 5499 break; 5500 goto next_spqe; 5501 5502 case EVENT_RING_OPCODE_FUNCTION_UPDATE: 5503 echo = elem->message.data.function_update_event.echo; 5504 if (echo == SWITCH_UPDATE) { 5505 DP(BNX2X_MSG_SP | NETIF_MSG_IFUP, 5506 "got FUNC_SWITCH_UPDATE ramrod\n"); 5507 if (f_obj->complete_cmd( 5508 bp, f_obj, BNX2X_F_CMD_SWITCH_UPDATE)) 5509 break; 5510 5511 } else { 5512 int cmd = BNX2X_SP_RTNL_AFEX_F_UPDATE; 5513 5514 DP(BNX2X_MSG_SP | BNX2X_MSG_MCP, 5515 "AFEX: ramrod completed FUNCTION_UPDATE\n"); 5516 f_obj->complete_cmd(bp, f_obj, 5517 BNX2X_F_CMD_AFEX_UPDATE); 5518 5519 /* We will perform the Queues update from 5520 * sp_rtnl task as all Queue SP operations 5521 * should run under rtnl_lock. 5522 */ 5523 bnx2x_schedule_sp_rtnl(bp, cmd, 0); 5524 } 5525 5526 goto next_spqe; 5527 5528 case EVENT_RING_OPCODE_AFEX_VIF_LISTS: 5529 f_obj->complete_cmd(bp, f_obj, 5530 BNX2X_F_CMD_AFEX_VIFLISTS); 5531 bnx2x_after_afex_vif_lists(bp, elem); 5532 goto next_spqe; 5533 case EVENT_RING_OPCODE_FUNCTION_START: 5534 DP(BNX2X_MSG_SP | NETIF_MSG_IFUP, 5535 "got FUNC_START ramrod\n"); 5536 if (f_obj->complete_cmd(bp, f_obj, BNX2X_F_CMD_START)) 5537 break; 5538 5539 goto next_spqe; 5540 5541 case EVENT_RING_OPCODE_FUNCTION_STOP: 5542 DP(BNX2X_MSG_SP | NETIF_MSG_IFUP, 5543 "got FUNC_STOP ramrod\n"); 5544 if (f_obj->complete_cmd(bp, f_obj, BNX2X_F_CMD_STOP)) 5545 break; 5546 5547 goto next_spqe; 5548 5549 case EVENT_RING_OPCODE_SET_TIMESYNC: 5550 DP(BNX2X_MSG_SP | BNX2X_MSG_PTP, 5551 "got set_timesync ramrod completion\n"); 5552 if (f_obj->complete_cmd(bp, f_obj, 5553 BNX2X_F_CMD_SET_TIMESYNC)) 5554 break; 5555 goto next_spqe; 5556 } 5557 5558 switch (opcode | bp->state) { 5559 case (EVENT_RING_OPCODE_RSS_UPDATE_RULES | 5560 BNX2X_STATE_OPEN): 5561 case (EVENT_RING_OPCODE_RSS_UPDATE_RULES | 5562 BNX2X_STATE_OPENING_WAIT4_PORT): 5563 cid = elem->message.data.eth_event.echo & 5564 BNX2X_SWCID_MASK; 5565 DP(BNX2X_MSG_SP, "got RSS_UPDATE ramrod. CID %d\n", 5566 cid); 5567 rss_raw->clear_pending(rss_raw); 5568 break; 5569 5570 case (EVENT_RING_OPCODE_SET_MAC | BNX2X_STATE_OPEN): 5571 case (EVENT_RING_OPCODE_SET_MAC | BNX2X_STATE_DIAG): 5572 case (EVENT_RING_OPCODE_SET_MAC | 5573 BNX2X_STATE_CLOSING_WAIT4_HALT): 5574 case (EVENT_RING_OPCODE_CLASSIFICATION_RULES | 5575 BNX2X_STATE_OPEN): 5576 case (EVENT_RING_OPCODE_CLASSIFICATION_RULES | 5577 BNX2X_STATE_DIAG): 5578 case (EVENT_RING_OPCODE_CLASSIFICATION_RULES | 5579 BNX2X_STATE_CLOSING_WAIT4_HALT): 5580 DP(BNX2X_MSG_SP, "got (un)set mac ramrod\n"); 5581 bnx2x_handle_classification_eqe(bp, elem); 5582 break; 5583 5584 case (EVENT_RING_OPCODE_MULTICAST_RULES | 5585 BNX2X_STATE_OPEN): 5586 case (EVENT_RING_OPCODE_MULTICAST_RULES | 5587 BNX2X_STATE_DIAG): 5588 case (EVENT_RING_OPCODE_MULTICAST_RULES | 5589 BNX2X_STATE_CLOSING_WAIT4_HALT): 5590 DP(BNX2X_MSG_SP, "got mcast ramrod\n"); 5591 bnx2x_handle_mcast_eqe(bp); 5592 break; 5593 5594 case (EVENT_RING_OPCODE_FILTERS_RULES | 5595 BNX2X_STATE_OPEN): 5596 case (EVENT_RING_OPCODE_FILTERS_RULES | 5597 BNX2X_STATE_DIAG): 5598 case (EVENT_RING_OPCODE_FILTERS_RULES | 5599 BNX2X_STATE_CLOSING_WAIT4_HALT): 5600 DP(BNX2X_MSG_SP, "got rx_mode ramrod\n"); 5601 bnx2x_handle_rx_mode_eqe(bp); 5602 break; 5603 default: 5604 /* unknown event log error and continue */ 5605 BNX2X_ERR("Unknown EQ event %d, bp->state 0x%x\n", 5606 elem->message.opcode, bp->state); 5607 } 5608next_spqe: 5609 spqe_cnt++; 5610 } /* for */ 5611 5612 smp_mb__before_atomic(); 5613 atomic_add(spqe_cnt, &bp->eq_spq_left); 5614 5615 bp->eq_cons = sw_cons; 5616 bp->eq_prod = sw_prod; 5617 /* Make sure that above mem writes were issued towards the memory */ 5618 smp_wmb(); 5619 5620 /* update producer */ 5621 bnx2x_update_eq_prod(bp, bp->eq_prod); 5622} 5623 5624static void bnx2x_sp_task(struct work_struct *work) 5625{ 5626 struct bnx2x *bp = container_of(work, struct bnx2x, sp_task.work); 5627 5628 DP(BNX2X_MSG_SP, "sp task invoked\n"); 5629 5630 /* make sure the atomic interrupt_occurred has been written */ 5631 smp_rmb(); 5632 if (atomic_read(&bp->interrupt_occurred)) { 5633 5634 /* what work needs to be performed? */ 5635 u16 status = bnx2x_update_dsb_idx(bp); 5636 5637 DP(BNX2X_MSG_SP, "status %x\n", status); 5638 DP(BNX2X_MSG_SP, "setting interrupt_occurred to 0\n"); 5639 atomic_set(&bp->interrupt_occurred, 0); 5640 5641 /* HW attentions */ 5642 if (status & BNX2X_DEF_SB_ATT_IDX) { 5643 bnx2x_attn_int(bp); 5644 status &= ~BNX2X_DEF_SB_ATT_IDX; 5645 } 5646 5647 /* SP events: STAT_QUERY and others */ 5648 if (status & BNX2X_DEF_SB_IDX) { 5649 struct bnx2x_fastpath *fp = bnx2x_fcoe_fp(bp); 5650 5651 if (FCOE_INIT(bp) && 5652 (bnx2x_has_rx_work(fp) || bnx2x_has_tx_work(fp))) { 5653 /* Prevent local bottom-halves from running as 5654 * we are going to change the local NAPI list. 5655 */ 5656 local_bh_disable(); 5657 napi_schedule(&bnx2x_fcoe(bp, napi)); 5658 local_bh_enable(); 5659 } 5660 5661 /* Handle EQ completions */ 5662 bnx2x_eq_int(bp); 5663 bnx2x_ack_sb(bp, bp->igu_dsb_id, USTORM_ID, 5664 le16_to_cpu(bp->def_idx), IGU_INT_NOP, 1); 5665 5666 status &= ~BNX2X_DEF_SB_IDX; 5667 } 5668 5669 /* if status is non zero then perhaps something went wrong */ 5670 if (unlikely(status)) 5671 DP(BNX2X_MSG_SP, 5672 "got an unknown interrupt! (status 0x%x)\n", status); 5673 5674 /* ack status block only if something was actually handled */ 5675 bnx2x_ack_sb(bp, bp->igu_dsb_id, ATTENTION_ID, 5676 le16_to_cpu(bp->def_att_idx), IGU_INT_ENABLE, 1); 5677 } 5678 5679 /* afex - poll to check if VIFSET_ACK should be sent to MFW */ 5680 if (test_and_clear_bit(BNX2X_AFEX_PENDING_VIFSET_MCP_ACK, 5681 &bp->sp_state)) { 5682 bnx2x_link_report(bp); 5683 bnx2x_fw_command(bp, DRV_MSG_CODE_AFEX_VIFSET_ACK, 0); 5684 } 5685} 5686 5687irqreturn_t bnx2x_msix_sp_int(int irq, void *dev_instance) 5688{ 5689 struct net_device *dev = dev_instance; 5690 struct bnx2x *bp = netdev_priv(dev); 5691 5692 bnx2x_ack_sb(bp, bp->igu_dsb_id, USTORM_ID, 0, 5693 IGU_INT_DISABLE, 0); 5694 5695#ifdef BNX2X_STOP_ON_ERROR 5696 if (unlikely(bp->panic)) 5697 return IRQ_HANDLED; 5698#endif 5699 5700 if (CNIC_LOADED(bp)) { 5701 struct cnic_ops *c_ops; 5702 5703 rcu_read_lock(); 5704 c_ops = rcu_dereference(bp->cnic_ops); 5705 if (c_ops) 5706 c_ops->cnic_handler(bp->cnic_data, NULL); 5707 rcu_read_unlock(); 5708 } 5709 5710 /* schedule sp task to perform default status block work, ack 5711 * attentions and enable interrupts. 5712 */ 5713 bnx2x_schedule_sp_task(bp); 5714 5715 return IRQ_HANDLED; 5716} 5717 5718/* end of slow path */ 5719 5720void bnx2x_drv_pulse(struct bnx2x *bp) 5721{ 5722 SHMEM_WR(bp, func_mb[BP_FW_MB_IDX(bp)].drv_pulse_mb, 5723 bp->fw_drv_pulse_wr_seq); 5724} 5725 5726static void bnx2x_timer(unsigned long data) 5727{ 5728 struct bnx2x *bp = (struct bnx2x *) data; 5729 5730 if (!netif_running(bp->dev)) 5731 return; 5732 5733 if (IS_PF(bp) && 5734 !BP_NOMCP(bp)) { 5735 int mb_idx = BP_FW_MB_IDX(bp); 5736 u16 drv_pulse; 5737 u16 mcp_pulse; 5738 5739 ++bp->fw_drv_pulse_wr_seq; 5740 bp->fw_drv_pulse_wr_seq &= DRV_PULSE_SEQ_MASK; 5741 drv_pulse = bp->fw_drv_pulse_wr_seq; 5742 bnx2x_drv_pulse(bp); 5743 5744 mcp_pulse = (SHMEM_RD(bp, func_mb[mb_idx].mcp_pulse_mb) & 5745 MCP_PULSE_SEQ_MASK); 5746 /* The delta between driver pulse and mcp response 5747 * should not get too big. If the MFW is more than 5 pulses 5748 * behind, we should worry about it enough to generate an error 5749 * log. 5750 */ 5751 if (((drv_pulse - mcp_pulse) & MCP_PULSE_SEQ_MASK) > 5) 5752 BNX2X_ERR("MFW seems hanged: drv_pulse (0x%x) != mcp_pulse (0x%x)\n", 5753 drv_pulse, mcp_pulse); 5754 } 5755 5756 if (bp->state == BNX2X_STATE_OPEN) 5757 bnx2x_stats_handle(bp, STATS_EVENT_UPDATE); 5758 5759 /* sample pf vf bulletin board for new posts from pf */ 5760 if (IS_VF(bp)) 5761 bnx2x_timer_sriov(bp); 5762 5763 mod_timer(&bp->timer, jiffies + bp->current_interval); 5764} 5765 5766/* end of Statistics */ 5767 5768/* nic init */ 5769 5770/* 5771 * nic init service functions 5772 */ 5773 5774static void bnx2x_fill(struct bnx2x *bp, u32 addr, int fill, u32 len) 5775{ 5776 u32 i; 5777 if (!(len%4) && !(addr%4)) 5778 for (i = 0; i < len; i += 4) 5779 REG_WR(bp, addr + i, fill); 5780 else 5781 for (i = 0; i < len; i++) 5782 REG_WR8(bp, addr + i, fill); 5783} 5784 5785/* helper: writes FP SP data to FW - data_size in dwords */ 5786static void bnx2x_wr_fp_sb_data(struct bnx2x *bp, 5787 int fw_sb_id, 5788 u32 *sb_data_p, 5789 u32 data_size) 5790{ 5791 int index; 5792 for (index = 0; index < data_size; index++) 5793 REG_WR(bp, BAR_CSTRORM_INTMEM + 5794 CSTORM_STATUS_BLOCK_DATA_OFFSET(fw_sb_id) + 5795 sizeof(u32)*index, 5796 *(sb_data_p + index)); 5797} 5798 5799static void bnx2x_zero_fp_sb(struct bnx2x *bp, int fw_sb_id) 5800{ 5801 u32 *sb_data_p; 5802 u32 data_size = 0; 5803 struct hc_status_block_data_e2 sb_data_e2; 5804 struct hc_status_block_data_e1x sb_data_e1x; 5805 5806 /* disable the function first */ 5807 if (!CHIP_IS_E1x(bp)) { 5808 memset(&sb_data_e2, 0, sizeof(struct hc_status_block_data_e2)); 5809 sb_data_e2.common.state = SB_DISABLED; 5810 sb_data_e2.common.p_func.vf_valid = false; 5811 sb_data_p = (u32 *)&sb_data_e2; 5812 data_size = sizeof(struct hc_status_block_data_e2)/sizeof(u32); 5813 } else { 5814 memset(&sb_data_e1x, 0, 5815 sizeof(struct hc_status_block_data_e1x)); 5816 sb_data_e1x.common.state = SB_DISABLED; 5817 sb_data_e1x.common.p_func.vf_valid = false; 5818 sb_data_p = (u32 *)&sb_data_e1x; 5819 data_size = sizeof(struct hc_status_block_data_e1x)/sizeof(u32); 5820 } 5821 bnx2x_wr_fp_sb_data(bp, fw_sb_id, sb_data_p, data_size); 5822 5823 bnx2x_fill(bp, BAR_CSTRORM_INTMEM + 5824 CSTORM_STATUS_BLOCK_OFFSET(fw_sb_id), 0, 5825 CSTORM_STATUS_BLOCK_SIZE); 5826 bnx2x_fill(bp, BAR_CSTRORM_INTMEM + 5827 CSTORM_SYNC_BLOCK_OFFSET(fw_sb_id), 0, 5828 CSTORM_SYNC_BLOCK_SIZE); 5829} 5830 5831/* helper: writes SP SB data to FW */ 5832static void bnx2x_wr_sp_sb_data(struct bnx2x *bp, 5833 struct hc_sp_status_block_data *sp_sb_data) 5834{ 5835 int func = BP_FUNC(bp); 5836 int i; 5837 for (i = 0; i < sizeof(struct hc_sp_status_block_data)/sizeof(u32); i++) 5838 REG_WR(bp, BAR_CSTRORM_INTMEM + 5839 CSTORM_SP_STATUS_BLOCK_DATA_OFFSET(func) + 5840 i*sizeof(u32), 5841 *((u32 *)sp_sb_data + i)); 5842} 5843 5844static void bnx2x_zero_sp_sb(struct bnx2x *bp) 5845{ 5846 int func = BP_FUNC(bp); 5847 struct hc_sp_status_block_data sp_sb_data; 5848 memset(&sp_sb_data, 0, sizeof(struct hc_sp_status_block_data)); 5849 5850 sp_sb_data.state = SB_DISABLED; 5851 sp_sb_data.p_func.vf_valid = false; 5852 5853 bnx2x_wr_sp_sb_data(bp, &sp_sb_data); 5854 5855 bnx2x_fill(bp, BAR_CSTRORM_INTMEM + 5856 CSTORM_SP_STATUS_BLOCK_OFFSET(func), 0, 5857 CSTORM_SP_STATUS_BLOCK_SIZE); 5858 bnx2x_fill(bp, BAR_CSTRORM_INTMEM + 5859 CSTORM_SP_SYNC_BLOCK_OFFSET(func), 0, 5860 CSTORM_SP_SYNC_BLOCK_SIZE); 5861} 5862 5863static void bnx2x_setup_ndsb_state_machine(struct hc_status_block_sm *hc_sm, 5864 int igu_sb_id, int igu_seg_id) 5865{ 5866 hc_sm->igu_sb_id = igu_sb_id; 5867 hc_sm->igu_seg_id = igu_seg_id; 5868 hc_sm->timer_value = 0xFF; 5869 hc_sm->time_to_expire = 0xFFFFFFFF; 5870} 5871 5872/* allocates state machine ids. */ 5873static void bnx2x_map_sb_state_machines(struct hc_index_data *index_data) 5874{ 5875 /* zero out state machine indices */ 5876 /* rx indices */ 5877 index_data[HC_INDEX_ETH_RX_CQ_CONS].flags &= ~HC_INDEX_DATA_SM_ID; 5878 5879 /* tx indices */ 5880 index_data[HC_INDEX_OOO_TX_CQ_CONS].flags &= ~HC_INDEX_DATA_SM_ID; 5881 index_data[HC_INDEX_ETH_TX_CQ_CONS_COS0].flags &= ~HC_INDEX_DATA_SM_ID; 5882 index_data[HC_INDEX_ETH_TX_CQ_CONS_COS1].flags &= ~HC_INDEX_DATA_SM_ID; 5883 index_data[HC_INDEX_ETH_TX_CQ_CONS_COS2].flags &= ~HC_INDEX_DATA_SM_ID; 5884 5885 /* map indices */ 5886 /* rx indices */ 5887 index_data[HC_INDEX_ETH_RX_CQ_CONS].flags |= 5888 SM_RX_ID << HC_INDEX_DATA_SM_ID_SHIFT; 5889 5890 /* tx indices */ 5891 index_data[HC_INDEX_OOO_TX_CQ_CONS].flags |= 5892 SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT; 5893 index_data[HC_INDEX_ETH_TX_CQ_CONS_COS0].flags |= 5894 SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT; 5895 index_data[HC_INDEX_ETH_TX_CQ_CONS_COS1].flags |= 5896 SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT; 5897 index_data[HC_INDEX_ETH_TX_CQ_CONS_COS2].flags |= 5898 SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT; 5899} 5900 5901void bnx2x_init_sb(struct bnx2x *bp, dma_addr_t mapping, int vfid, 5902 u8 vf_valid, int fw_sb_id, int igu_sb_id) 5903{ 5904 int igu_seg_id; 5905 5906 struct hc_status_block_data_e2 sb_data_e2; 5907 struct hc_status_block_data_e1x sb_data_e1x; 5908 struct hc_status_block_sm *hc_sm_p; 5909 int data_size; 5910 u32 *sb_data_p; 5911 5912 if (CHIP_INT_MODE_IS_BC(bp)) 5913 igu_seg_id = HC_SEG_ACCESS_NORM; 5914 else 5915 igu_seg_id = IGU_SEG_ACCESS_NORM; 5916 5917 bnx2x_zero_fp_sb(bp, fw_sb_id); 5918 5919 if (!CHIP_IS_E1x(bp)) { 5920 memset(&sb_data_e2, 0, sizeof(struct hc_status_block_data_e2)); 5921 sb_data_e2.common.state = SB_ENABLED; 5922 sb_data_e2.common.p_func.pf_id = BP_FUNC(bp); 5923 sb_data_e2.common.p_func.vf_id = vfid; 5924 sb_data_e2.common.p_func.vf_valid = vf_valid; 5925 sb_data_e2.common.p_func.vnic_id = BP_VN(bp); 5926 sb_data_e2.common.same_igu_sb_1b = true; 5927 sb_data_e2.common.host_sb_addr.hi = U64_HI(mapping); 5928 sb_data_e2.common.host_sb_addr.lo = U64_LO(mapping); 5929 hc_sm_p = sb_data_e2.common.state_machine; 5930 sb_data_p = (u32 *)&sb_data_e2; 5931 data_size = sizeof(struct hc_status_block_data_e2)/sizeof(u32); 5932 bnx2x_map_sb_state_machines(sb_data_e2.index_data); 5933 } else { 5934 memset(&sb_data_e1x, 0, 5935 sizeof(struct hc_status_block_data_e1x)); 5936 sb_data_e1x.common.state = SB_ENABLED; 5937 sb_data_e1x.common.p_func.pf_id = BP_FUNC(bp); 5938 sb_data_e1x.common.p_func.vf_id = 0xff; 5939 sb_data_e1x.common.p_func.vf_valid = false; 5940 sb_data_e1x.common.p_func.vnic_id = BP_VN(bp); 5941 sb_data_e1x.common.same_igu_sb_1b = true; 5942 sb_data_e1x.common.host_sb_addr.hi = U64_HI(mapping); 5943 sb_data_e1x.common.host_sb_addr.lo = U64_LO(mapping); 5944 hc_sm_p = sb_data_e1x.common.state_machine; 5945 sb_data_p = (u32 *)&sb_data_e1x; 5946 data_size = sizeof(struct hc_status_block_data_e1x)/sizeof(u32); 5947 bnx2x_map_sb_state_machines(sb_data_e1x.index_data); 5948 } 5949 5950 bnx2x_setup_ndsb_state_machine(&hc_sm_p[SM_RX_ID], 5951 igu_sb_id, igu_seg_id); 5952 bnx2x_setup_ndsb_state_machine(&hc_sm_p[SM_TX_ID], 5953 igu_sb_id, igu_seg_id); 5954 5955 DP(NETIF_MSG_IFUP, "Init FW SB %d\n", fw_sb_id); 5956 5957 /* write indices to HW - PCI guarantees endianity of regpairs */ 5958 bnx2x_wr_fp_sb_data(bp, fw_sb_id, sb_data_p, data_size); 5959} 5960 5961static void bnx2x_update_coalesce_sb(struct bnx2x *bp, u8 fw_sb_id, 5962 u16 tx_usec, u16 rx_usec) 5963{ 5964 bnx2x_update_coalesce_sb_index(bp, fw_sb_id, HC_INDEX_ETH_RX_CQ_CONS, 5965 false, rx_usec); 5966 bnx2x_update_coalesce_sb_index(bp, fw_sb_id, 5967 HC_INDEX_ETH_TX_CQ_CONS_COS0, false, 5968 tx_usec); 5969 bnx2x_update_coalesce_sb_index(bp, fw_sb_id, 5970 HC_INDEX_ETH_TX_CQ_CONS_COS1, false, 5971 tx_usec); 5972 bnx2x_update_coalesce_sb_index(bp, fw_sb_id, 5973 HC_INDEX_ETH_TX_CQ_CONS_COS2, false, 5974 tx_usec); 5975} 5976 5977static void bnx2x_init_def_sb(struct bnx2x *bp) 5978{ 5979 struct host_sp_status_block *def_sb = bp->def_status_blk; 5980 dma_addr_t mapping = bp->def_status_blk_mapping; 5981 int igu_sp_sb_index; 5982 int igu_seg_id; 5983 int port = BP_PORT(bp); 5984 int func = BP_FUNC(bp); 5985 int reg_offset, reg_offset_en5; 5986 u64 section; 5987 int index; 5988 struct hc_sp_status_block_data sp_sb_data; 5989 memset(&sp_sb_data, 0, sizeof(struct hc_sp_status_block_data)); 5990 5991 if (CHIP_INT_MODE_IS_BC(bp)) { 5992 igu_sp_sb_index = DEF_SB_IGU_ID; 5993 igu_seg_id = HC_SEG_ACCESS_DEF; 5994 } else { 5995 igu_sp_sb_index = bp->igu_dsb_id; 5996 igu_seg_id = IGU_SEG_ACCESS_DEF; 5997 } 5998 5999 /* ATTN */ 6000 section = ((u64)mapping) + offsetof(struct host_sp_status_block, 6001 atten_status_block); 6002 def_sb->atten_status_block.status_block_id = igu_sp_sb_index; 6003 6004 bp->attn_state = 0; 6005 6006 reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 : 6007 MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0); 6008 reg_offset_en5 = (port ? MISC_REG_AEU_ENABLE5_FUNC_1_OUT_0 : 6009 MISC_REG_AEU_ENABLE5_FUNC_0_OUT_0); 6010 for (index = 0; index < MAX_DYNAMIC_ATTN_GRPS; index++) { 6011 int sindex; 6012 /* take care of sig[0]..sig[4] */ 6013 for (sindex = 0; sindex < 4; sindex++) 6014 bp->attn_group[index].sig[sindex] = 6015 REG_RD(bp, reg_offset + sindex*0x4 + 0x10*index); 6016 6017 if (!CHIP_IS_E1x(bp)) 6018 /* 6019 * enable5 is separate from the rest of the registers, 6020 * and therefore the address skip is 4 6021 * and not 16 between the different groups 6022 */ 6023 bp->attn_group[index].sig[4] = REG_RD(bp, 6024 reg_offset_en5 + 0x4*index); 6025 else 6026 bp->attn_group[index].sig[4] = 0; 6027 } 6028 6029 if (bp->common.int_block == INT_BLOCK_HC) { 6030 reg_offset = (port ? HC_REG_ATTN_MSG1_ADDR_L : 6031 HC_REG_ATTN_MSG0_ADDR_L); 6032 6033 REG_WR(bp, reg_offset, U64_LO(section)); 6034 REG_WR(bp, reg_offset + 4, U64_HI(section)); 6035 } else if (!CHIP_IS_E1x(bp)) { 6036 REG_WR(bp, IGU_REG_ATTN_MSG_ADDR_L, U64_LO(section)); 6037 REG_WR(bp, IGU_REG_ATTN_MSG_ADDR_H, U64_HI(section)); 6038 } 6039 6040 section = ((u64)mapping) + offsetof(struct host_sp_status_block, 6041 sp_sb); 6042 6043 bnx2x_zero_sp_sb(bp); 6044 6045 /* PCI guarantees endianity of regpairs */ 6046 sp_sb_data.state = SB_ENABLED; 6047 sp_sb_data.host_sb_addr.lo = U64_LO(section); 6048 sp_sb_data.host_sb_addr.hi = U64_HI(section); 6049 sp_sb_data.igu_sb_id = igu_sp_sb_index; 6050 sp_sb_data.igu_seg_id = igu_seg_id; 6051 sp_sb_data.p_func.pf_id = func; 6052 sp_sb_data.p_func.vnic_id = BP_VN(bp); 6053 sp_sb_data.p_func.vf_id = 0xff; 6054 6055 bnx2x_wr_sp_sb_data(bp, &sp_sb_data); 6056 6057 bnx2x_ack_sb(bp, bp->igu_dsb_id, USTORM_ID, 0, IGU_INT_ENABLE, 0); 6058} 6059 6060void bnx2x_update_coalesce(struct bnx2x *bp) 6061{ 6062 int i; 6063 6064 for_each_eth_queue(bp, i) 6065 bnx2x_update_coalesce_sb(bp, bp->fp[i].fw_sb_id, 6066 bp->tx_ticks, bp->rx_ticks); 6067} 6068 6069static void bnx2x_init_sp_ring(struct bnx2x *bp) 6070{ 6071 spin_lock_init(&bp->spq_lock); 6072 atomic_set(&bp->cq_spq_left, MAX_SPQ_PENDING); 6073 6074 bp->spq_prod_idx = 0; 6075 bp->dsb_sp_prod = BNX2X_SP_DSB_INDEX; 6076 bp->spq_prod_bd = bp->spq; 6077 bp->spq_last_bd = bp->spq_prod_bd + MAX_SP_DESC_CNT; 6078} 6079 6080static void bnx2x_init_eq_ring(struct bnx2x *bp) 6081{ 6082 int i; 6083 for (i = 1; i <= NUM_EQ_PAGES; i++) { 6084 union event_ring_elem *elem = 6085 &bp->eq_ring[EQ_DESC_CNT_PAGE * i - 1]; 6086 6087 elem->next_page.addr.hi = 6088 cpu_to_le32(U64_HI(bp->eq_mapping + 6089 BCM_PAGE_SIZE * (i % NUM_EQ_PAGES))); 6090 elem->next_page.addr.lo = 6091 cpu_to_le32(U64_LO(bp->eq_mapping + 6092 BCM_PAGE_SIZE*(i % NUM_EQ_PAGES))); 6093 } 6094 bp->eq_cons = 0; 6095 bp->eq_prod = NUM_EQ_DESC; 6096 bp->eq_cons_sb = BNX2X_EQ_INDEX; 6097 /* we want a warning message before it gets wrought... */ 6098 atomic_set(&bp->eq_spq_left, 6099 min_t(int, MAX_SP_DESC_CNT - MAX_SPQ_PENDING, NUM_EQ_DESC) - 1); 6100} 6101 6102/* called with netif_addr_lock_bh() */ 6103static int bnx2x_set_q_rx_mode(struct bnx2x *bp, u8 cl_id, 6104 unsigned long rx_mode_flags, 6105 unsigned long rx_accept_flags, 6106 unsigned long tx_accept_flags, 6107 unsigned long ramrod_flags) 6108{ 6109 struct bnx2x_rx_mode_ramrod_params ramrod_param; 6110 int rc; 6111 6112 memset(&ramrod_param, 0, sizeof(ramrod_param)); 6113 6114 /* Prepare ramrod parameters */ 6115 ramrod_param.cid = 0; 6116 ramrod_param.cl_id = cl_id; 6117 ramrod_param.rx_mode_obj = &bp->rx_mode_obj; 6118 ramrod_param.func_id = BP_FUNC(bp); 6119 6120 ramrod_param.pstate = &bp->sp_state; 6121 ramrod_param.state = BNX2X_FILTER_RX_MODE_PENDING; 6122 6123 ramrod_param.rdata = bnx2x_sp(bp, rx_mode_rdata); 6124 ramrod_param.rdata_mapping = bnx2x_sp_mapping(bp, rx_mode_rdata); 6125 6126 set_bit(BNX2X_FILTER_RX_MODE_PENDING, &bp->sp_state); 6127 6128 ramrod_param.ramrod_flags = ramrod_flags; 6129 ramrod_param.rx_mode_flags = rx_mode_flags; 6130 6131 ramrod_param.rx_accept_flags = rx_accept_flags; 6132 ramrod_param.tx_accept_flags = tx_accept_flags; 6133 6134 rc = bnx2x_config_rx_mode(bp, &ramrod_param); 6135 if (rc < 0) { 6136 BNX2X_ERR("Set rx_mode %d failed\n", bp->rx_mode); 6137 return rc; 6138 } 6139 6140 return 0; 6141} 6142 6143static int bnx2x_fill_accept_flags(struct bnx2x *bp, u32 rx_mode, 6144 unsigned long *rx_accept_flags, 6145 unsigned long *tx_accept_flags) 6146{ 6147 /* Clear the flags first */ 6148 *rx_accept_flags = 0; 6149 *tx_accept_flags = 0; 6150 6151 switch (rx_mode) { 6152 case BNX2X_RX_MODE_NONE: 6153 /* 6154 * 'drop all' supersedes any accept flags that may have been 6155 * passed to the function. 6156 */ 6157 break; 6158 case BNX2X_RX_MODE_NORMAL: 6159 __set_bit(BNX2X_ACCEPT_UNICAST, rx_accept_flags); 6160 __set_bit(BNX2X_ACCEPT_MULTICAST, rx_accept_flags); 6161 __set_bit(BNX2X_ACCEPT_BROADCAST, rx_accept_flags); 6162 6163 /* internal switching mode */ 6164 __set_bit(BNX2X_ACCEPT_UNICAST, tx_accept_flags); 6165 __set_bit(BNX2X_ACCEPT_MULTICAST, tx_accept_flags); 6166 __set_bit(BNX2X_ACCEPT_BROADCAST, tx_accept_flags); 6167 6168 break; 6169 case BNX2X_RX_MODE_ALLMULTI: 6170 __set_bit(BNX2X_ACCEPT_UNICAST, rx_accept_flags); 6171 __set_bit(BNX2X_ACCEPT_ALL_MULTICAST, rx_accept_flags); 6172 __set_bit(BNX2X_ACCEPT_BROADCAST, rx_accept_flags); 6173 6174 /* internal switching mode */ 6175 __set_bit(BNX2X_ACCEPT_UNICAST, tx_accept_flags); 6176 __set_bit(BNX2X_ACCEPT_ALL_MULTICAST, tx_accept_flags); 6177 __set_bit(BNX2X_ACCEPT_BROADCAST, tx_accept_flags); 6178 6179 break; 6180 case BNX2X_RX_MODE_PROMISC: 6181 /* According to definition of SI mode, iface in promisc mode 6182 * should receive matched and unmatched (in resolution of port) 6183 * unicast packets. 6184 */ 6185 __set_bit(BNX2X_ACCEPT_UNMATCHED, rx_accept_flags); 6186 __set_bit(BNX2X_ACCEPT_UNICAST, rx_accept_flags); 6187 __set_bit(BNX2X_ACCEPT_ALL_MULTICAST, rx_accept_flags); 6188 __set_bit(BNX2X_ACCEPT_BROADCAST, rx_accept_flags); 6189 6190 /* internal switching mode */ 6191 __set_bit(BNX2X_ACCEPT_ALL_MULTICAST, tx_accept_flags); 6192 __set_bit(BNX2X_ACCEPT_BROADCAST, tx_accept_flags); 6193 6194 if (IS_MF_SI(bp)) 6195 __set_bit(BNX2X_ACCEPT_ALL_UNICAST, tx_accept_flags); 6196 else 6197 __set_bit(BNX2X_ACCEPT_UNICAST, tx_accept_flags); 6198 6199 break; 6200 default: 6201 BNX2X_ERR("Unknown rx_mode: %d\n", rx_mode); 6202 return -EINVAL; 6203 } 6204 6205 /* Set ACCEPT_ANY_VLAN as we do not enable filtering by VLAN */ 6206 if (rx_mode != BNX2X_RX_MODE_NONE) { 6207 __set_bit(BNX2X_ACCEPT_ANY_VLAN, rx_accept_flags); 6208 __set_bit(BNX2X_ACCEPT_ANY_VLAN, tx_accept_flags); 6209 } 6210 6211 return 0; 6212} 6213 6214/* called with netif_addr_lock_bh() */ 6215static int bnx2x_set_storm_rx_mode(struct bnx2x *bp) 6216{ 6217 unsigned long rx_mode_flags = 0, ramrod_flags = 0; 6218 unsigned long rx_accept_flags = 0, tx_accept_flags = 0; 6219 int rc; 6220 6221 if (!NO_FCOE(bp)) 6222 /* Configure rx_mode of FCoE Queue */ 6223 __set_bit(BNX2X_RX_MODE_FCOE_ETH, &rx_mode_flags); 6224 6225 rc = bnx2x_fill_accept_flags(bp, bp->rx_mode, &rx_accept_flags, 6226 &tx_accept_flags); 6227 if (rc) 6228 return rc; 6229 6230 __set_bit(RAMROD_RX, &ramrod_flags); 6231 __set_bit(RAMROD_TX, &ramrod_flags); 6232 6233 return bnx2x_set_q_rx_mode(bp, bp->fp->cl_id, rx_mode_flags, 6234 rx_accept_flags, tx_accept_flags, 6235 ramrod_flags); 6236} 6237 6238static void bnx2x_init_internal_common(struct bnx2x *bp) 6239{ 6240 int i; 6241 6242 /* Zero this manually as its initialization is 6243 currently missing in the initTool */ 6244 for (i = 0; i < (USTORM_AGG_DATA_SIZE >> 2); i++) 6245 REG_WR(bp, BAR_USTRORM_INTMEM + 6246 USTORM_AGG_DATA_OFFSET + i * 4, 0); 6247 if (!CHIP_IS_E1x(bp)) { 6248 REG_WR8(bp, BAR_CSTRORM_INTMEM + CSTORM_IGU_MODE_OFFSET, 6249 CHIP_INT_MODE_IS_BC(bp) ? 6250 HC_IGU_BC_MODE : HC_IGU_NBC_MODE); 6251 } 6252} 6253 6254static void bnx2x_init_internal(struct bnx2x *bp, u32 load_code) 6255{ 6256 switch (load_code) { 6257 case FW_MSG_CODE_DRV_LOAD_COMMON: 6258 case FW_MSG_CODE_DRV_LOAD_COMMON_CHIP: 6259 bnx2x_init_internal_common(bp); 6260 /* no break */ 6261 6262 case FW_MSG_CODE_DRV_LOAD_PORT: 6263 /* nothing to do */ 6264 /* no break */ 6265 6266 case FW_MSG_CODE_DRV_LOAD_FUNCTION: 6267 /* internal memory per function is 6268 initialized inside bnx2x_pf_init */ 6269 break; 6270 6271 default: 6272 BNX2X_ERR("Unknown load_code (0x%x) from MCP\n", load_code); 6273 break; 6274 } 6275} 6276 6277static inline u8 bnx2x_fp_igu_sb_id(struct bnx2x_fastpath *fp) 6278{ 6279 return fp->bp->igu_base_sb + fp->index + CNIC_SUPPORT(fp->bp); 6280} 6281 6282static inline u8 bnx2x_fp_fw_sb_id(struct bnx2x_fastpath *fp) 6283{ 6284 return fp->bp->base_fw_ndsb + fp->index + CNIC_SUPPORT(fp->bp); 6285} 6286 6287static u8 bnx2x_fp_cl_id(struct bnx2x_fastpath *fp) 6288{ 6289 if (CHIP_IS_E1x(fp->bp)) 6290 return BP_L_ID(fp->bp) + fp->index; 6291 else /* We want Client ID to be the same as IGU SB ID for 57712 */ 6292 return bnx2x_fp_igu_sb_id(fp); 6293} 6294 6295static void bnx2x_init_eth_fp(struct bnx2x *bp, int fp_idx) 6296{ 6297 struct bnx2x_fastpath *fp = &bp->fp[fp_idx]; 6298 u8 cos; 6299 unsigned long q_type = 0; 6300 u32 cids[BNX2X_MULTI_TX_COS] = { 0 }; 6301 fp->rx_queue = fp_idx; 6302 fp->cid = fp_idx; 6303 fp->cl_id = bnx2x_fp_cl_id(fp); 6304 fp->fw_sb_id = bnx2x_fp_fw_sb_id(fp); 6305 fp->igu_sb_id = bnx2x_fp_igu_sb_id(fp); 6306 /* qZone id equals to FW (per path) client id */ 6307 fp->cl_qzone_id = bnx2x_fp_qzone_id(fp); 6308 6309 /* init shortcut */ 6310 fp->ustorm_rx_prods_offset = bnx2x_rx_ustorm_prods_offset(fp); 6311 6312 /* Setup SB indices */ 6313 fp->rx_cons_sb = BNX2X_RX_SB_INDEX; 6314 6315 /* Configure Queue State object */ 6316 __set_bit(BNX2X_Q_TYPE_HAS_RX, &q_type); 6317 __set_bit(BNX2X_Q_TYPE_HAS_TX, &q_type); 6318 6319 BUG_ON(fp->max_cos > BNX2X_MULTI_TX_COS); 6320 6321 /* init tx data */ 6322 for_each_cos_in_tx_queue(fp, cos) { 6323 bnx2x_init_txdata(bp, fp->txdata_ptr[cos], 6324 CID_COS_TO_TX_ONLY_CID(fp->cid, cos, bp), 6325 FP_COS_TO_TXQ(fp, cos, bp), 6326 BNX2X_TX_SB_INDEX_BASE + cos, fp); 6327 cids[cos] = fp->txdata_ptr[cos]->cid; 6328 } 6329 6330 /* nothing more for vf to do here */ 6331 if (IS_VF(bp)) 6332 return; 6333 6334 bnx2x_init_sb(bp, fp->status_blk_mapping, BNX2X_VF_ID_INVALID, false, 6335 fp->fw_sb_id, fp->igu_sb_id); 6336 bnx2x_update_fpsb_idx(fp); 6337 bnx2x_init_queue_obj(bp, &bnx2x_sp_obj(bp, fp).q_obj, fp->cl_id, cids, 6338 fp->max_cos, BP_FUNC(bp), bnx2x_sp(bp, q_rdata), 6339 bnx2x_sp_mapping(bp, q_rdata), q_type); 6340 6341 /** 6342 * Configure classification DBs: Always enable Tx switching 6343 */ 6344 bnx2x_init_vlan_mac_fp_objs(fp, BNX2X_OBJ_TYPE_RX_TX); 6345 6346 DP(NETIF_MSG_IFUP, 6347 "queue[%d]: bnx2x_init_sb(%p,%p) cl_id %d fw_sb %d igu_sb %d\n", 6348 fp_idx, bp, fp->status_blk.e2_sb, fp->cl_id, fp->fw_sb_id, 6349 fp->igu_sb_id); 6350} 6351 6352static void bnx2x_init_tx_ring_one(struct bnx2x_fp_txdata *txdata) 6353{ 6354 int i; 6355 6356 for (i = 1; i <= NUM_TX_RINGS; i++) { 6357 struct eth_tx_next_bd *tx_next_bd = 6358 &txdata->tx_desc_ring[TX_DESC_CNT * i - 1].next_bd; 6359 6360 tx_next_bd->addr_hi = 6361 cpu_to_le32(U64_HI(txdata->tx_desc_mapping + 6362 BCM_PAGE_SIZE*(i % NUM_TX_RINGS))); 6363 tx_next_bd->addr_lo = 6364 cpu_to_le32(U64_LO(txdata->tx_desc_mapping + 6365 BCM_PAGE_SIZE*(i % NUM_TX_RINGS))); 6366 } 6367 6368 *txdata->tx_cons_sb = cpu_to_le16(0); 6369 6370 SET_FLAG(txdata->tx_db.data.header.header, DOORBELL_HDR_DB_TYPE, 1); 6371 txdata->tx_db.data.zero_fill1 = 0; 6372 txdata->tx_db.data.prod = 0; 6373 6374 txdata->tx_pkt_prod = 0; 6375 txdata->tx_pkt_cons = 0; 6376 txdata->tx_bd_prod = 0; 6377 txdata->tx_bd_cons = 0; 6378 txdata->tx_pkt = 0; 6379} 6380 6381static void bnx2x_init_tx_rings_cnic(struct bnx2x *bp) 6382{ 6383 int i; 6384 6385 for_each_tx_queue_cnic(bp, i) 6386 bnx2x_init_tx_ring_one(bp->fp[i].txdata_ptr[0]); 6387} 6388 6389static void bnx2x_init_tx_rings(struct bnx2x *bp) 6390{ 6391 int i; 6392 u8 cos; 6393 6394 for_each_eth_queue(bp, i) 6395 for_each_cos_in_tx_queue(&bp->fp[i], cos) 6396 bnx2x_init_tx_ring_one(bp->fp[i].txdata_ptr[cos]); 6397} 6398 6399static void bnx2x_init_fcoe_fp(struct bnx2x *bp) 6400{ 6401 struct bnx2x_fastpath *fp = bnx2x_fcoe_fp(bp); 6402 unsigned long q_type = 0; 6403 6404 bnx2x_fcoe(bp, rx_queue) = BNX2X_NUM_ETH_QUEUES(bp); 6405 bnx2x_fcoe(bp, cl_id) = bnx2x_cnic_eth_cl_id(bp, 6406 BNX2X_FCOE_ETH_CL_ID_IDX); 6407 bnx2x_fcoe(bp, cid) = BNX2X_FCOE_ETH_CID(bp); 6408 bnx2x_fcoe(bp, fw_sb_id) = DEF_SB_ID; 6409 bnx2x_fcoe(bp, igu_sb_id) = bp->igu_dsb_id; 6410 bnx2x_fcoe(bp, rx_cons_sb) = BNX2X_FCOE_L2_RX_INDEX; 6411 bnx2x_init_txdata(bp, bnx2x_fcoe(bp, txdata_ptr[0]), 6412 fp->cid, FCOE_TXQ_IDX(bp), BNX2X_FCOE_L2_TX_INDEX, 6413 fp); 6414 6415 DP(NETIF_MSG_IFUP, "created fcoe tx data (fp index %d)\n", fp->index); 6416 6417 /* qZone id equals to FW (per path) client id */ 6418 bnx2x_fcoe(bp, cl_qzone_id) = bnx2x_fp_qzone_id(fp); 6419 /* init shortcut */ 6420 bnx2x_fcoe(bp, ustorm_rx_prods_offset) = 6421 bnx2x_rx_ustorm_prods_offset(fp); 6422 6423 /* Configure Queue State object */ 6424 __set_bit(BNX2X_Q_TYPE_HAS_RX, &q_type); 6425 __set_bit(BNX2X_Q_TYPE_HAS_TX, &q_type); 6426 6427 /* No multi-CoS for FCoE L2 client */ 6428 BUG_ON(fp->max_cos != 1); 6429 6430 bnx2x_init_queue_obj(bp, &bnx2x_sp_obj(bp, fp).q_obj, fp->cl_id, 6431 &fp->cid, 1, BP_FUNC(bp), bnx2x_sp(bp, q_rdata), 6432 bnx2x_sp_mapping(bp, q_rdata), q_type); 6433 6434 DP(NETIF_MSG_IFUP, 6435 "queue[%d]: bnx2x_init_sb(%p,%p) cl_id %d fw_sb %d igu_sb %d\n", 6436 fp->index, bp, fp->status_blk.e2_sb, fp->cl_id, fp->fw_sb_id, 6437 fp->igu_sb_id); 6438} 6439 6440void bnx2x_nic_init_cnic(struct bnx2x *bp) 6441{ 6442 if (!NO_FCOE(bp)) 6443 bnx2x_init_fcoe_fp(bp); 6444 6445 bnx2x_init_sb(bp, bp->cnic_sb_mapping, 6446 BNX2X_VF_ID_INVALID, false, 6447 bnx2x_cnic_fw_sb_id(bp), bnx2x_cnic_igu_sb_id(bp)); 6448 6449 /* ensure status block indices were read */ 6450 rmb(); 6451 bnx2x_init_rx_rings_cnic(bp); 6452 bnx2x_init_tx_rings_cnic(bp); 6453 6454 /* flush all */ 6455 mb(); 6456 mmiowb(); 6457} 6458 6459void bnx2x_pre_irq_nic_init(struct bnx2x *bp) 6460{ 6461 int i; 6462 6463 /* Setup NIC internals and enable interrupts */ 6464 for_each_eth_queue(bp, i) 6465 bnx2x_init_eth_fp(bp, i); 6466 6467 /* ensure status block indices were read */ 6468 rmb(); 6469 bnx2x_init_rx_rings(bp); 6470 bnx2x_init_tx_rings(bp); 6471 6472 if (IS_PF(bp)) { 6473 /* Initialize MOD_ABS interrupts */ 6474 bnx2x_init_mod_abs_int(bp, &bp->link_vars, bp->common.chip_id, 6475 bp->common.shmem_base, 6476 bp->common.shmem2_base, BP_PORT(bp)); 6477 6478 /* initialize the default status block and sp ring */ 6479 bnx2x_init_def_sb(bp); 6480 bnx2x_update_dsb_idx(bp); 6481 bnx2x_init_sp_ring(bp); 6482 } else { 6483 bnx2x_memset_stats(bp); 6484 } 6485} 6486 6487void bnx2x_post_irq_nic_init(struct bnx2x *bp, u32 load_code) 6488{ 6489 bnx2x_init_eq_ring(bp); 6490 bnx2x_init_internal(bp, load_code); 6491 bnx2x_pf_init(bp); 6492 bnx2x_stats_init(bp); 6493 6494 /* flush all before enabling interrupts */ 6495 mb(); 6496 mmiowb(); 6497 6498 bnx2x_int_enable(bp); 6499 6500 /* Check for SPIO5 */ 6501 bnx2x_attn_int_deasserted0(bp, 6502 REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 + BP_PORT(bp)*4) & 6503 AEU_INPUTS_ATTN_BITS_SPIO5); 6504} 6505 6506/* gzip service functions */ 6507static int bnx2x_gunzip_init(struct bnx2x *bp) 6508{ 6509 bp->gunzip_buf = dma_alloc_coherent(&bp->pdev->dev, FW_BUF_SIZE, 6510 &bp->gunzip_mapping, GFP_KERNEL); 6511 if (bp->gunzip_buf == NULL) 6512 goto gunzip_nomem1; 6513 6514 bp->strm = kmalloc(sizeof(*bp->strm), GFP_KERNEL); 6515 if (bp->strm == NULL) 6516 goto gunzip_nomem2; 6517 6518 bp->strm->workspace = vmalloc(zlib_inflate_workspacesize()); 6519 if (bp->strm->workspace == NULL) 6520 goto gunzip_nomem3; 6521 6522 return 0; 6523 6524gunzip_nomem3: 6525 kfree(bp->strm); 6526 bp->strm = NULL; 6527 6528gunzip_nomem2: 6529 dma_free_coherent(&bp->pdev->dev, FW_BUF_SIZE, bp->gunzip_buf, 6530 bp->gunzip_mapping); 6531 bp->gunzip_buf = NULL; 6532 6533gunzip_nomem1: 6534 BNX2X_ERR("Cannot allocate firmware buffer for un-compression\n"); 6535 return -ENOMEM; 6536} 6537 6538static void bnx2x_gunzip_end(struct bnx2x *bp) 6539{ 6540 if (bp->strm) { 6541 vfree(bp->strm->workspace); 6542 kfree(bp->strm); 6543 bp->strm = NULL; 6544 } 6545 6546 if (bp->gunzip_buf) { 6547 dma_free_coherent(&bp->pdev->dev, FW_BUF_SIZE, bp->gunzip_buf, 6548 bp->gunzip_mapping); 6549 bp->gunzip_buf = NULL; 6550 } 6551} 6552 6553static int bnx2x_gunzip(struct bnx2x *bp, const u8 *zbuf, int len) 6554{ 6555 int n, rc; 6556 6557 /* check gzip header */ 6558 if ((zbuf[0] != 0x1f) || (zbuf[1] != 0x8b) || (zbuf[2] != Z_DEFLATED)) { 6559 BNX2X_ERR("Bad gzip header\n"); 6560 return -EINVAL; 6561 } 6562 6563 n = 10; 6564 6565#define FNAME 0x8 6566 6567 if (zbuf[3] & FNAME) 6568 while ((zbuf[n++] != 0) && (n < len)); 6569 6570 bp->strm->next_in = (typeof(bp->strm->next_in))zbuf + n; 6571 bp->strm->avail_in = len - n; 6572 bp->strm->next_out = bp->gunzip_buf; 6573 bp->strm->avail_out = FW_BUF_SIZE; 6574 6575 rc = zlib_inflateInit2(bp->strm, -MAX_WBITS); 6576 if (rc != Z_OK) 6577 return rc; 6578 6579 rc = zlib_inflate(bp->strm, Z_FINISH); 6580 if ((rc != Z_OK) && (rc != Z_STREAM_END)) 6581 netdev_err(bp->dev, "Firmware decompression error: %s\n", 6582 bp->strm->msg); 6583 6584 bp->gunzip_outlen = (FW_BUF_SIZE - bp->strm->avail_out); 6585 if (bp->gunzip_outlen & 0x3) 6586 netdev_err(bp->dev, 6587 "Firmware decompression error: gunzip_outlen (%d) not aligned\n", 6588 bp->gunzip_outlen); 6589 bp->gunzip_outlen >>= 2; 6590 6591 zlib_inflateEnd(bp->strm); 6592 6593 if (rc == Z_STREAM_END) 6594 return 0; 6595 6596 return rc; 6597} 6598 6599/* nic load/unload */ 6600 6601/* 6602 * General service functions 6603 */ 6604 6605/* send a NIG loopback debug packet */ 6606static void bnx2x_lb_pckt(struct bnx2x *bp) 6607{ 6608 u32 wb_write[3]; 6609 6610 /* Ethernet source and destination addresses */ 6611 wb_write[0] = 0x55555555; 6612 wb_write[1] = 0x55555555; 6613 wb_write[2] = 0x20; /* SOP */ 6614 REG_WR_DMAE(bp, NIG_REG_DEBUG_PACKET_LB, wb_write, 3); 6615 6616 /* NON-IP protocol */ 6617 wb_write[0] = 0x09000000; 6618 wb_write[1] = 0x55555555; 6619 wb_write[2] = 0x10; /* EOP, eop_bvalid = 0 */ 6620 REG_WR_DMAE(bp, NIG_REG_DEBUG_PACKET_LB, wb_write, 3); 6621} 6622 6623/* some of the internal memories 6624 * are not directly readable from the driver 6625 * to test them we send debug packets 6626 */ 6627static int bnx2x_int_mem_test(struct bnx2x *bp) 6628{ 6629 int factor; 6630 int count, i; 6631 u32 val = 0; 6632 6633 if (CHIP_REV_IS_FPGA(bp)) 6634 factor = 120; 6635 else if (CHIP_REV_IS_EMUL(bp)) 6636 factor = 200; 6637 else 6638 factor = 1; 6639 6640 /* Disable inputs of parser neighbor blocks */ 6641 REG_WR(bp, TSDM_REG_ENABLE_IN1, 0x0); 6642 REG_WR(bp, TCM_REG_PRS_IFEN, 0x0); 6643 REG_WR(bp, CFC_REG_DEBUG0, 0x1); 6644 REG_WR(bp, NIG_REG_PRS_REQ_IN_EN, 0x0); 6645 6646 /* Write 0 to parser credits for CFC search request */ 6647 REG_WR(bp, PRS_REG_CFC_SEARCH_INITIAL_CREDIT, 0x0); 6648 6649 /* send Ethernet packet */ 6650 bnx2x_lb_pckt(bp); 6651 6652 /* TODO do i reset NIG statistic? */ 6653 /* Wait until NIG register shows 1 packet of size 0x10 */ 6654 count = 1000 * factor; 6655 while (count) { 6656 6657 bnx2x_read_dmae(bp, NIG_REG_STAT2_BRB_OCTET, 2); 6658 val = *bnx2x_sp(bp, wb_data[0]); 6659 if (val == 0x10) 6660 break; 6661 6662 usleep_range(10000, 20000); 6663 count--; 6664 } 6665 if (val != 0x10) { 6666 BNX2X_ERR("NIG timeout val = 0x%x\n", val); 6667 return -1; 6668 } 6669 6670 /* Wait until PRS register shows 1 packet */ 6671 count = 1000 * factor; 6672 while (count) { 6673 val = REG_RD(bp, PRS_REG_NUM_OF_PACKETS); 6674 if (val == 1) 6675 break; 6676 6677 usleep_range(10000, 20000); 6678 count--; 6679 } 6680 if (val != 0x1) { 6681 BNX2X_ERR("PRS timeout val = 0x%x\n", val); 6682 return -2; 6683 } 6684 6685 /* Reset and init BRB, PRS */ 6686 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, 0x03); 6687 msleep(50); 6688 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0x03); 6689 msleep(50); 6690 bnx2x_init_block(bp, BLOCK_BRB1, PHASE_COMMON); 6691 bnx2x_init_block(bp, BLOCK_PRS, PHASE_COMMON); 6692 6693 DP(NETIF_MSG_HW, "part2\n"); 6694 6695 /* Disable inputs of parser neighbor blocks */ 6696 REG_WR(bp, TSDM_REG_ENABLE_IN1, 0x0); 6697 REG_WR(bp, TCM_REG_PRS_IFEN, 0x0); 6698 REG_WR(bp, CFC_REG_DEBUG0, 0x1); 6699 REG_WR(bp, NIG_REG_PRS_REQ_IN_EN, 0x0); 6700 6701 /* Write 0 to parser credits for CFC search request */ 6702 REG_WR(bp, PRS_REG_CFC_SEARCH_INITIAL_CREDIT, 0x0); 6703 6704 /* send 10 Ethernet packets */ 6705 for (i = 0; i < 10; i++) 6706 bnx2x_lb_pckt(bp); 6707 6708 /* Wait until NIG register shows 10 + 1 6709 packets of size 11*0x10 = 0xb0 */ 6710 count = 1000 * factor; 6711 while (count) { 6712 6713 bnx2x_read_dmae(bp, NIG_REG_STAT2_BRB_OCTET, 2); 6714 val = *bnx2x_sp(bp, wb_data[0]); 6715 if (val == 0xb0) 6716 break; 6717 6718 usleep_range(10000, 20000); 6719 count--; 6720 } 6721 if (val != 0xb0) { 6722 BNX2X_ERR("NIG timeout val = 0x%x\n", val); 6723 return -3; 6724 } 6725 6726 /* Wait until PRS register shows 2 packets */ 6727 val = REG_RD(bp, PRS_REG_NUM_OF_PACKETS); 6728 if (val != 2) 6729 BNX2X_ERR("PRS timeout val = 0x%x\n", val); 6730 6731 /* Write 1 to parser credits for CFC search request */ 6732 REG_WR(bp, PRS_REG_CFC_SEARCH_INITIAL_CREDIT, 0x1); 6733 6734 /* Wait until PRS register shows 3 packets */ 6735 msleep(10 * factor); 6736 /* Wait until NIG register shows 1 packet of size 0x10 */ 6737 val = REG_RD(bp, PRS_REG_NUM_OF_PACKETS); 6738 if (val != 3) 6739 BNX2X_ERR("PRS timeout val = 0x%x\n", val); 6740 6741 /* clear NIG EOP FIFO */ 6742 for (i = 0; i < 11; i++) 6743 REG_RD(bp, NIG_REG_INGRESS_EOP_LB_FIFO); 6744 val = REG_RD(bp, NIG_REG_INGRESS_EOP_LB_EMPTY); 6745 if (val != 1) { 6746 BNX2X_ERR("clear of NIG failed\n"); 6747 return -4; 6748 } 6749 6750 /* Reset and init BRB, PRS, NIG */ 6751 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, 0x03); 6752 msleep(50); 6753 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0x03); 6754 msleep(50); 6755 bnx2x_init_block(bp, BLOCK_BRB1, PHASE_COMMON); 6756 bnx2x_init_block(bp, BLOCK_PRS, PHASE_COMMON); 6757 if (!CNIC_SUPPORT(bp)) 6758 /* set NIC mode */ 6759 REG_WR(bp, PRS_REG_NIC_MODE, 1); 6760 6761 /* Enable inputs of parser neighbor blocks */ 6762 REG_WR(bp, TSDM_REG_ENABLE_IN1, 0x7fffffff); 6763 REG_WR(bp, TCM_REG_PRS_IFEN, 0x1); 6764 REG_WR(bp, CFC_REG_DEBUG0, 0x0); 6765 REG_WR(bp, NIG_REG_PRS_REQ_IN_EN, 0x1); 6766 6767 DP(NETIF_MSG_HW, "done\n"); 6768 6769 return 0; /* OK */ 6770} 6771 6772static void bnx2x_enable_blocks_attention(struct bnx2x *bp) 6773{ 6774 u32 val; 6775 6776 REG_WR(bp, PXP_REG_PXP_INT_MASK_0, 0); 6777 if (!CHIP_IS_E1x(bp)) 6778 REG_WR(bp, PXP_REG_PXP_INT_MASK_1, 0x40); 6779 else 6780 REG_WR(bp, PXP_REG_PXP_INT_MASK_1, 0); 6781 REG_WR(bp, DORQ_REG_DORQ_INT_MASK, 0); 6782 REG_WR(bp, CFC_REG_CFC_INT_MASK, 0); 6783 /* 6784 * mask read length error interrupts in brb for parser 6785 * (parsing unit and 'checksum and crc' unit) 6786 * these errors are legal (PU reads fixed length and CAC can cause 6787 * read length error on truncated packets) 6788 */ 6789 REG_WR(bp, BRB1_REG_BRB1_INT_MASK, 0xFC00); 6790 REG_WR(bp, QM_REG_QM_INT_MASK, 0); 6791 REG_WR(bp, TM_REG_TM_INT_MASK, 0); 6792 REG_WR(bp, XSDM_REG_XSDM_INT_MASK_0, 0); 6793 REG_WR(bp, XSDM_REG_XSDM_INT_MASK_1, 0); 6794 REG_WR(bp, XCM_REG_XCM_INT_MASK, 0); 6795/* REG_WR(bp, XSEM_REG_XSEM_INT_MASK_0, 0); */ 6796/* REG_WR(bp, XSEM_REG_XSEM_INT_MASK_1, 0); */ 6797 REG_WR(bp, USDM_REG_USDM_INT_MASK_0, 0); 6798 REG_WR(bp, USDM_REG_USDM_INT_MASK_1, 0); 6799 REG_WR(bp, UCM_REG_UCM_INT_MASK, 0); 6800/* REG_WR(bp, USEM_REG_USEM_INT_MASK_0, 0); */ 6801/* REG_WR(bp, USEM_REG_USEM_INT_MASK_1, 0); */ 6802 REG_WR(bp, GRCBASE_UPB + PB_REG_PB_INT_MASK, 0); 6803 REG_WR(bp, CSDM_REG_CSDM_INT_MASK_0, 0); 6804 REG_WR(bp, CSDM_REG_CSDM_INT_MASK_1, 0); 6805 REG_WR(bp, CCM_REG_CCM_INT_MASK, 0); 6806/* REG_WR(bp, CSEM_REG_CSEM_INT_MASK_0, 0); */ 6807/* REG_WR(bp, CSEM_REG_CSEM_INT_MASK_1, 0); */ 6808 6809 val = PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_AFT | 6810 PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_OF | 6811 PXP2_PXP2_INT_MASK_0_REG_PGL_PCIE_ATTN; 6812 if (!CHIP_IS_E1x(bp)) 6813 val |= PXP2_PXP2_INT_MASK_0_REG_PGL_READ_BLOCKED | 6814 PXP2_PXP2_INT_MASK_0_REG_PGL_WRITE_BLOCKED; 6815 REG_WR(bp, PXP2_REG_PXP2_INT_MASK_0, val); 6816 6817 REG_WR(bp, TSDM_REG_TSDM_INT_MASK_0, 0); 6818 REG_WR(bp, TSDM_REG_TSDM_INT_MASK_1, 0); 6819 REG_WR(bp, TCM_REG_TCM_INT_MASK, 0); 6820/* REG_WR(bp, TSEM_REG_TSEM_INT_MASK_0, 0); */ 6821 6822 if (!CHIP_IS_E1x(bp)) 6823 /* enable VFC attentions: bits 11 and 12, bits 31:13 reserved */ 6824 REG_WR(bp, TSEM_REG_TSEM_INT_MASK_1, 0x07ff); 6825 6826 REG_WR(bp, CDU_REG_CDU_INT_MASK, 0); 6827 REG_WR(bp, DMAE_REG_DMAE_INT_MASK, 0); 6828/* REG_WR(bp, MISC_REG_MISC_INT_MASK, 0); */ 6829 REG_WR(bp, PBF_REG_PBF_INT_MASK, 0x18); /* bit 3,4 masked */ 6830} 6831 6832static void bnx2x_reset_common(struct bnx2x *bp) 6833{ 6834 u32 val = 0x1400; 6835 6836 /* reset_common */ 6837 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, 6838 0xd3ffff7f); 6839 6840 if (CHIP_IS_E3(bp)) { 6841 val |= MISC_REGISTERS_RESET_REG_2_MSTAT0; 6842 val |= MISC_REGISTERS_RESET_REG_2_MSTAT1; 6843 } 6844 6845 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, val); 6846} 6847 6848static void bnx2x_setup_dmae(struct bnx2x *bp) 6849{ 6850 bp->dmae_ready = 0; 6851 spin_lock_init(&bp->dmae_lock); 6852} 6853 6854static void bnx2x_init_pxp(struct bnx2x *bp) 6855{ 6856 u16 devctl; 6857 int r_order, w_order; 6858 6859 pcie_capability_read_word(bp->pdev, PCI_EXP_DEVCTL, &devctl); 6860 DP(NETIF_MSG_HW, "read 0x%x from devctl\n", devctl); 6861 w_order = ((devctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5); 6862 if (bp->mrrs == -1) 6863 r_order = ((devctl & PCI_EXP_DEVCTL_READRQ) >> 12); 6864 else { 6865 DP(NETIF_MSG_HW, "force read order to %d\n", bp->mrrs); 6866 r_order = bp->mrrs; 6867 } 6868 6869 bnx2x_init_pxp_arb(bp, r_order, w_order); 6870} 6871 6872static void bnx2x_setup_fan_failure_detection(struct bnx2x *bp) 6873{ 6874 int is_required; 6875 u32 val; 6876 int port; 6877 6878 if (BP_NOMCP(bp)) 6879 return; 6880 6881 is_required = 0; 6882 val = SHMEM_RD(bp, dev_info.shared_hw_config.config2) & 6883 SHARED_HW_CFG_FAN_FAILURE_MASK; 6884 6885 if (val == SHARED_HW_CFG_FAN_FAILURE_ENABLED) 6886 is_required = 1; 6887 6888 /* 6889 * The fan failure mechanism is usually related to the PHY type since 6890 * the power consumption of the board is affected by the PHY. Currently, 6891 * fan is required for most designs with SFX7101, BCM8727 and BCM8481. 6892 */ 6893 else if (val == SHARED_HW_CFG_FAN_FAILURE_PHY_TYPE) 6894 for (port = PORT_0; port < PORT_MAX; port++) { 6895 is_required |= 6896 bnx2x_fan_failure_det_req( 6897 bp, 6898 bp->common.shmem_base, 6899 bp->common.shmem2_base, 6900 port); 6901 } 6902 6903 DP(NETIF_MSG_HW, "fan detection setting: %d\n", is_required); 6904 6905 if (is_required == 0) 6906 return; 6907 6908 /* Fan failure is indicated by SPIO 5 */ 6909 bnx2x_set_spio(bp, MISC_SPIO_SPIO5, MISC_SPIO_INPUT_HI_Z); 6910 6911 /* set to active low mode */ 6912 val = REG_RD(bp, MISC_REG_SPIO_INT); 6913 val |= (MISC_SPIO_SPIO5 << MISC_SPIO_INT_OLD_SET_POS); 6914 REG_WR(bp, MISC_REG_SPIO_INT, val); 6915 6916 /* enable interrupt to signal the IGU */ 6917 val = REG_RD(bp, MISC_REG_SPIO_EVENT_EN); 6918 val |= MISC_SPIO_SPIO5; 6919 REG_WR(bp, MISC_REG_SPIO_EVENT_EN, val); 6920} 6921 6922void bnx2x_pf_disable(struct bnx2x *bp) 6923{ 6924 u32 val = REG_RD(bp, IGU_REG_PF_CONFIGURATION); 6925 val &= ~IGU_PF_CONF_FUNC_EN; 6926 6927 REG_WR(bp, IGU_REG_PF_CONFIGURATION, val); 6928 REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 0); 6929 REG_WR(bp, CFC_REG_WEAK_ENABLE_PF, 0); 6930} 6931 6932static void bnx2x__common_init_phy(struct bnx2x *bp) 6933{ 6934 u32 shmem_base[2], shmem2_base[2]; 6935 /* Avoid common init in case MFW supports LFA */ 6936 if (SHMEM2_RD(bp, size) > 6937 (u32)offsetof(struct shmem2_region, lfa_host_addr[BP_PORT(bp)])) 6938 return; 6939 shmem_base[0] = bp->common.shmem_base; 6940 shmem2_base[0] = bp->common.shmem2_base; 6941 if (!CHIP_IS_E1x(bp)) { 6942 shmem_base[1] = 6943 SHMEM2_RD(bp, other_shmem_base_addr); 6944 shmem2_base[1] = 6945 SHMEM2_RD(bp, other_shmem2_base_addr); 6946 } 6947 bnx2x_acquire_phy_lock(bp); 6948 bnx2x_common_init_phy(bp, shmem_base, shmem2_base, 6949 bp->common.chip_id); 6950 bnx2x_release_phy_lock(bp); 6951} 6952 6953static void bnx2x_config_endianity(struct bnx2x *bp, u32 val) 6954{ 6955 REG_WR(bp, PXP2_REG_RQ_QM_ENDIAN_M, val); 6956 REG_WR(bp, PXP2_REG_RQ_TM_ENDIAN_M, val); 6957 REG_WR(bp, PXP2_REG_RQ_SRC_ENDIAN_M, val); 6958 REG_WR(bp, PXP2_REG_RQ_CDU_ENDIAN_M, val); 6959 REG_WR(bp, PXP2_REG_RQ_DBG_ENDIAN_M, val); 6960 6961 /* make sure this value is 0 */ 6962 REG_WR(bp, PXP2_REG_RQ_HC_ENDIAN_M, 0); 6963 6964 REG_WR(bp, PXP2_REG_RD_QM_SWAP_MODE, val); 6965 REG_WR(bp, PXP2_REG_RD_TM_SWAP_MODE, val); 6966 REG_WR(bp, PXP2_REG_RD_SRC_SWAP_MODE, val); 6967 REG_WR(bp, PXP2_REG_RD_CDURD_SWAP_MODE, val); 6968} 6969 6970static void bnx2x_set_endianity(struct bnx2x *bp) 6971{ 6972#ifdef __BIG_ENDIAN 6973 bnx2x_config_endianity(bp, 1); 6974#else 6975 bnx2x_config_endianity(bp, 0); 6976#endif 6977} 6978 6979static void bnx2x_reset_endianity(struct bnx2x *bp) 6980{ 6981 bnx2x_config_endianity(bp, 0); 6982} 6983 6984/** 6985 * bnx2x_init_hw_common - initialize the HW at the COMMON phase. 6986 * 6987 * @bp: driver handle 6988 */ 6989static int bnx2x_init_hw_common(struct bnx2x *bp) 6990{ 6991 u32 val; 6992 6993 DP(NETIF_MSG_HW, "starting common init func %d\n", BP_ABS_FUNC(bp)); 6994 6995 /* 6996 * take the RESET lock to protect undi_unload flow from accessing 6997 * registers while we're resetting the chip 6998 */ 6999 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RESET); 7000 7001 bnx2x_reset_common(bp); 7002 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0xffffffff); 7003 7004 val = 0xfffc; 7005 if (CHIP_IS_E3(bp)) { 7006 val |= MISC_REGISTERS_RESET_REG_2_MSTAT0; 7007 val |= MISC_REGISTERS_RESET_REG_2_MSTAT1; 7008 } 7009 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, val); 7010 7011 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RESET); 7012 7013 bnx2x_init_block(bp, BLOCK_MISC, PHASE_COMMON); 7014 7015 if (!CHIP_IS_E1x(bp)) { 7016 u8 abs_func_id; 7017 7018 /** 7019 * 4-port mode or 2-port mode we need to turn of master-enable 7020 * for everyone, after that, turn it back on for self. 7021 * so, we disregard multi-function or not, and always disable 7022 * for all functions on the given path, this means 0,2,4,6 for 7023 * path 0 and 1,3,5,7 for path 1 7024 */ 7025 for (abs_func_id = BP_PATH(bp); 7026 abs_func_id < E2_FUNC_MAX*2; abs_func_id += 2) { 7027 if (abs_func_id == BP_ABS_FUNC(bp)) { 7028 REG_WR(bp, 7029 PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 7030 1); 7031 continue; 7032 } 7033 7034 bnx2x_pretend_func(bp, abs_func_id); 7035 /* clear pf enable */ 7036 bnx2x_pf_disable(bp); 7037 bnx2x_pretend_func(bp, BP_ABS_FUNC(bp)); 7038 } 7039 } 7040 7041 bnx2x_init_block(bp, BLOCK_PXP, PHASE_COMMON); 7042 if (CHIP_IS_E1(bp)) { 7043 /* enable HW interrupt from PXP on USDM overflow 7044 bit 16 on INT_MASK_0 */ 7045 REG_WR(bp, PXP_REG_PXP_INT_MASK_0, 0); 7046 } 7047 7048 bnx2x_init_block(bp, BLOCK_PXP2, PHASE_COMMON); 7049 bnx2x_init_pxp(bp); 7050 bnx2x_set_endianity(bp); 7051 bnx2x_ilt_init_page_size(bp, INITOP_SET); 7052 7053 if (CHIP_REV_IS_FPGA(bp) && CHIP_IS_E1H(bp)) 7054 REG_WR(bp, PXP2_REG_PGL_TAGS_LIMIT, 0x1); 7055 7056 /* let the HW do it's magic ... */ 7057 msleep(100); 7058 /* finish PXP init */ 7059 val = REG_RD(bp, PXP2_REG_RQ_CFG_DONE); 7060 if (val != 1) { 7061 BNX2X_ERR("PXP2 CFG failed\n"); 7062 return -EBUSY; 7063 } 7064 val = REG_RD(bp, PXP2_REG_RD_INIT_DONE); 7065 if (val != 1) { 7066 BNX2X_ERR("PXP2 RD_INIT failed\n"); 7067 return -EBUSY; 7068 } 7069 7070 /* Timers bug workaround E2 only. We need to set the entire ILT to 7071 * have entries with value "0" and valid bit on. 7072 * This needs to be done by the first PF that is loaded in a path 7073 * (i.e. common phase) 7074 */ 7075 if (!CHIP_IS_E1x(bp)) { 7076/* In E2 there is a bug in the timers block that can cause function 6 / 7 7077 * (i.e. vnic3) to start even if it is marked as "scan-off". 7078 * This occurs when a different function (func2,3) is being marked 7079 * as "scan-off". Real-life scenario for example: if a driver is being 7080 * load-unloaded while func6,7 are down. This will cause the timer to access 7081 * the ilt, translate to a logical address and send a request to read/write. 7082 * Since the ilt for the function that is down is not valid, this will cause 7083 * a translation error which is unrecoverable. 7084 * The Workaround is intended to make sure that when this happens nothing fatal 7085 * will occur. The workaround: 7086 * 1. First PF driver which loads on a path will: 7087 * a. After taking the chip out of reset, by using pretend, 7088 * it will write "0" to the following registers of 7089 * the other vnics. 7090 * REG_WR(pdev, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 0); 7091 * REG_WR(pdev, CFC_REG_WEAK_ENABLE_PF,0); 7092 * REG_WR(pdev, CFC_REG_STRONG_ENABLE_PF,0); 7093 * And for itself it will write '1' to 7094 * PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER to enable 7095 * dmae-operations (writing to pram for example.) 7096 * note: can be done for only function 6,7 but cleaner this 7097 * way. 7098 * b. Write zero+valid to the entire ILT. 7099 * c. Init the first_timers_ilt_entry, last_timers_ilt_entry of 7100 * VNIC3 (of that port). The range allocated will be the 7101 * entire ILT. This is needed to prevent ILT range error. 7102 * 2. Any PF driver load flow: 7103 * a. ILT update with the physical addresses of the allocated 7104 * logical pages. 7105 * b. Wait 20msec. - note that this timeout is needed to make 7106 * sure there are no requests in one of the PXP internal 7107 * queues with "old" ILT addresses. 7108 * c. PF enable in the PGLC. 7109 * d. Clear the was_error of the PF in the PGLC. (could have 7110 * occurred while driver was down) 7111 * e. PF enable in the CFC (WEAK + STRONG) 7112 * f. Timers scan enable 7113 * 3. PF driver unload flow: 7114 * a. Clear the Timers scan_en. 7115 * b. Polling for scan_on=0 for that PF. 7116 * c. Clear the PF enable bit in the PXP. 7117 * d. Clear the PF enable in the CFC (WEAK + STRONG) 7118 * e. Write zero+valid to all ILT entries (The valid bit must 7119 * stay set) 7120 * f. If this is VNIC 3 of a port then also init 7121 * first_timers_ilt_entry to zero and last_timers_ilt_entry 7122 * to the last entry in the ILT. 7123 * 7124 * Notes: 7125 * Currently the PF error in the PGLC is non recoverable. 7126 * In the future the there will be a recovery routine for this error. 7127 * Currently attention is masked. 7128 * Having an MCP lock on the load/unload process does not guarantee that 7129 * there is no Timer disable during Func6/7 enable. This is because the 7130 * Timers scan is currently being cleared by the MCP on FLR. 7131 * Step 2.d can be done only for PF6/7 and the driver can also check if 7132 * there is error before clearing it. But the flow above is simpler and 7133 * more general. 7134 * All ILT entries are written by zero+valid and not just PF6/7 7135 * ILT entries since in the future the ILT entries allocation for 7136 * PF-s might be dynamic. 7137 */ 7138 struct ilt_client_info ilt_cli; 7139 struct bnx2x_ilt ilt; 7140 memset(&ilt_cli, 0, sizeof(struct ilt_client_info)); 7141 memset(&ilt, 0, sizeof(struct bnx2x_ilt)); 7142 7143 /* initialize dummy TM client */ 7144 ilt_cli.start = 0; 7145 ilt_cli.end = ILT_NUM_PAGE_ENTRIES - 1; 7146 ilt_cli.client_num = ILT_CLIENT_TM; 7147 7148 /* Step 1: set zeroes to all ilt page entries with valid bit on 7149 * Step 2: set the timers first/last ilt entry to point 7150 * to the entire range to prevent ILT range error for 3rd/4th 7151 * vnic (this code assumes existence of the vnic) 7152 * 7153 * both steps performed by call to bnx2x_ilt_client_init_op() 7154 * with dummy TM client 7155 * 7156 * we must use pretend since PXP2_REG_RQ_##blk##_FIRST_ILT 7157 * and his brother are split registers 7158 */ 7159 bnx2x_pretend_func(bp, (BP_PATH(bp) + 6)); 7160 bnx2x_ilt_client_init_op_ilt(bp, &ilt, &ilt_cli, INITOP_CLEAR); 7161 bnx2x_pretend_func(bp, BP_ABS_FUNC(bp)); 7162 7163 REG_WR(bp, PXP2_REG_RQ_DRAM_ALIGN, BNX2X_PXP_DRAM_ALIGN); 7164 REG_WR(bp, PXP2_REG_RQ_DRAM_ALIGN_RD, BNX2X_PXP_DRAM_ALIGN); 7165 REG_WR(bp, PXP2_REG_RQ_DRAM_ALIGN_SEL, 1); 7166 } 7167 7168 REG_WR(bp, PXP2_REG_RQ_DISABLE_INPUTS, 0); 7169 REG_WR(bp, PXP2_REG_RD_DISABLE_INPUTS, 0); 7170 7171 if (!CHIP_IS_E1x(bp)) { 7172 int factor = CHIP_REV_IS_EMUL(bp) ? 1000 : 7173 (CHIP_REV_IS_FPGA(bp) ? 400 : 0); 7174 bnx2x_init_block(bp, BLOCK_PGLUE_B, PHASE_COMMON); 7175 7176 bnx2x_init_block(bp, BLOCK_ATC, PHASE_COMMON); 7177 7178 /* let the HW do it's magic ... */ 7179 do { 7180 msleep(200); 7181 val = REG_RD(bp, ATC_REG_ATC_INIT_DONE); 7182 } while (factor-- && (val != 1)); 7183 7184 if (val != 1) { 7185 BNX2X_ERR("ATC_INIT failed\n"); 7186 return -EBUSY; 7187 } 7188 } 7189 7190 bnx2x_init_block(bp, BLOCK_DMAE, PHASE_COMMON); 7191 7192 bnx2x_iov_init_dmae(bp); 7193 7194 /* clean the DMAE memory */ 7195 bp->dmae_ready = 1; 7196 bnx2x_init_fill(bp, TSEM_REG_PRAM, 0, 8, 1); 7197 7198 bnx2x_init_block(bp, BLOCK_TCM, PHASE_COMMON); 7199 7200 bnx2x_init_block(bp, BLOCK_UCM, PHASE_COMMON); 7201 7202 bnx2x_init_block(bp, BLOCK_CCM, PHASE_COMMON); 7203 7204 bnx2x_init_block(bp, BLOCK_XCM, PHASE_COMMON); 7205 7206 bnx2x_read_dmae(bp, XSEM_REG_PASSIVE_BUFFER, 3); 7207 bnx2x_read_dmae(bp, CSEM_REG_PASSIVE_BUFFER, 3); 7208 bnx2x_read_dmae(bp, TSEM_REG_PASSIVE_BUFFER, 3); 7209 bnx2x_read_dmae(bp, USEM_REG_PASSIVE_BUFFER, 3); 7210 7211 bnx2x_init_block(bp, BLOCK_QM, PHASE_COMMON); 7212 7213 /* QM queues pointers table */ 7214 bnx2x_qm_init_ptr_table(bp, bp->qm_cid_count, INITOP_SET); 7215 7216 /* soft reset pulse */ 7217 REG_WR(bp, QM_REG_SOFT_RESET, 1); 7218 REG_WR(bp, QM_REG_SOFT_RESET, 0); 7219 7220 if (CNIC_SUPPORT(bp)) 7221 bnx2x_init_block(bp, BLOCK_TM, PHASE_COMMON); 7222 7223 bnx2x_init_block(bp, BLOCK_DORQ, PHASE_COMMON); 7224 7225 if (!CHIP_REV_IS_SLOW(bp)) 7226 /* enable hw interrupt from doorbell Q */ 7227 REG_WR(bp, DORQ_REG_DORQ_INT_MASK, 0); 7228 7229 bnx2x_init_block(bp, BLOCK_BRB1, PHASE_COMMON); 7230 7231 bnx2x_init_block(bp, BLOCK_PRS, PHASE_COMMON); 7232 REG_WR(bp, PRS_REG_A_PRSU_20, 0xf); 7233 7234 if (!CHIP_IS_E1(bp)) 7235 REG_WR(bp, PRS_REG_E1HOV_MODE, bp->path_has_ovlan); 7236 7237 if (!CHIP_IS_E1x(bp) && !CHIP_IS_E3B0(bp)) { 7238 if (IS_MF_AFEX(bp)) { 7239 /* configure that VNTag and VLAN headers must be 7240 * received in afex mode 7241 */ 7242 REG_WR(bp, PRS_REG_HDRS_AFTER_BASIC, 0xE); 7243 REG_WR(bp, PRS_REG_MUST_HAVE_HDRS, 0xA); 7244 REG_WR(bp, PRS_REG_HDRS_AFTER_TAG_0, 0x6); 7245 REG_WR(bp, PRS_REG_TAG_ETHERTYPE_0, 0x8926); 7246 REG_WR(bp, PRS_REG_TAG_LEN_0, 0x4); 7247 } else { 7248 /* Bit-map indicating which L2 hdrs may appear 7249 * after the basic Ethernet header 7250 */ 7251 REG_WR(bp, PRS_REG_HDRS_AFTER_BASIC, 7252 bp->path_has_ovlan ? 7 : 6); 7253 } 7254 } 7255 7256 bnx2x_init_block(bp, BLOCK_TSDM, PHASE_COMMON); 7257 bnx2x_init_block(bp, BLOCK_CSDM, PHASE_COMMON); 7258 bnx2x_init_block(bp, BLOCK_USDM, PHASE_COMMON); 7259 bnx2x_init_block(bp, BLOCK_XSDM, PHASE_COMMON); 7260 7261 if (!CHIP_IS_E1x(bp)) { 7262 /* reset VFC memories */ 7263 REG_WR(bp, TSEM_REG_FAST_MEMORY + VFC_REG_MEMORIES_RST, 7264 VFC_MEMORIES_RST_REG_CAM_RST | 7265 VFC_MEMORIES_RST_REG_RAM_RST); 7266 REG_WR(bp, XSEM_REG_FAST_MEMORY + VFC_REG_MEMORIES_RST, 7267 VFC_MEMORIES_RST_REG_CAM_RST | 7268 VFC_MEMORIES_RST_REG_RAM_RST); 7269 7270 msleep(20); 7271 } 7272 7273 bnx2x_init_block(bp, BLOCK_TSEM, PHASE_COMMON); 7274 bnx2x_init_block(bp, BLOCK_USEM, PHASE_COMMON); 7275 bnx2x_init_block(bp, BLOCK_CSEM, PHASE_COMMON); 7276 bnx2x_init_block(bp, BLOCK_XSEM, PHASE_COMMON); 7277 7278 /* sync semi rtc */ 7279 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, 7280 0x80000000); 7281 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 7282 0x80000000); 7283 7284 bnx2x_init_block(bp, BLOCK_UPB, PHASE_COMMON); 7285 bnx2x_init_block(bp, BLOCK_XPB, PHASE_COMMON); 7286 bnx2x_init_block(bp, BLOCK_PBF, PHASE_COMMON); 7287 7288 if (!CHIP_IS_E1x(bp)) { 7289 if (IS_MF_AFEX(bp)) { 7290 /* configure that VNTag and VLAN headers must be 7291 * sent in afex mode 7292 */ 7293 REG_WR(bp, PBF_REG_HDRS_AFTER_BASIC, 0xE); 7294 REG_WR(bp, PBF_REG_MUST_HAVE_HDRS, 0xA); 7295 REG_WR(bp, PBF_REG_HDRS_AFTER_TAG_0, 0x6); 7296 REG_WR(bp, PBF_REG_TAG_ETHERTYPE_0, 0x8926); 7297 REG_WR(bp, PBF_REG_TAG_LEN_0, 0x4); 7298 } else { 7299 REG_WR(bp, PBF_REG_HDRS_AFTER_BASIC, 7300 bp->path_has_ovlan ? 7 : 6); 7301 } 7302 } 7303 7304 REG_WR(bp, SRC_REG_SOFT_RST, 1); 7305 7306 bnx2x_init_block(bp, BLOCK_SRC, PHASE_COMMON); 7307 7308 if (CNIC_SUPPORT(bp)) { 7309 REG_WR(bp, SRC_REG_KEYSEARCH_0, 0x63285672); 7310 REG_WR(bp, SRC_REG_KEYSEARCH_1, 0x24b8f2cc); 7311 REG_WR(bp, SRC_REG_KEYSEARCH_2, 0x223aef9b); 7312 REG_WR(bp, SRC_REG_KEYSEARCH_3, 0x26001e3a); 7313 REG_WR(bp, SRC_REG_KEYSEARCH_4, 0x7ae91116); 7314 REG_WR(bp, SRC_REG_KEYSEARCH_5, 0x5ce5230b); 7315 REG_WR(bp, SRC_REG_KEYSEARCH_6, 0x298d8adf); 7316 REG_WR(bp, SRC_REG_KEYSEARCH_7, 0x6eb0ff09); 7317 REG_WR(bp, SRC_REG_KEYSEARCH_8, 0x1830f82f); 7318 REG_WR(bp, SRC_REG_KEYSEARCH_9, 0x01e46be7); 7319 } 7320 REG_WR(bp, SRC_REG_SOFT_RST, 0); 7321 7322 if (sizeof(union cdu_context) != 1024) 7323 /* we currently assume that a context is 1024 bytes */ 7324 dev_alert(&bp->pdev->dev, 7325 "please adjust the size of cdu_context(%ld)\n", 7326 (long)sizeof(union cdu_context)); 7327 7328 bnx2x_init_block(bp, BLOCK_CDU, PHASE_COMMON); 7329 val = (4 << 24) + (0 << 12) + 1024; 7330 REG_WR(bp, CDU_REG_CDU_GLOBAL_PARAMS, val); 7331 7332 bnx2x_init_block(bp, BLOCK_CFC, PHASE_COMMON); 7333 REG_WR(bp, CFC_REG_INIT_REG, 0x7FF); 7334 /* enable context validation interrupt from CFC */ 7335 REG_WR(bp, CFC_REG_CFC_INT_MASK, 0); 7336 7337 /* set the thresholds to prevent CFC/CDU race */ 7338 REG_WR(bp, CFC_REG_DEBUG0, 0x20020000); 7339 7340 bnx2x_init_block(bp, BLOCK_HC, PHASE_COMMON); 7341 7342 if (!CHIP_IS_E1x(bp) && BP_NOMCP(bp)) 7343 REG_WR(bp, IGU_REG_RESET_MEMORIES, 0x36); 7344 7345 bnx2x_init_block(bp, BLOCK_IGU, PHASE_COMMON); 7346 bnx2x_init_block(bp, BLOCK_MISC_AEU, PHASE_COMMON); 7347 7348 /* Reset PCIE errors for debug */ 7349 REG_WR(bp, 0x2814, 0xffffffff); 7350 REG_WR(bp, 0x3820, 0xffffffff); 7351 7352 if (!CHIP_IS_E1x(bp)) { 7353 REG_WR(bp, PCICFG_OFFSET + PXPCS_TL_CONTROL_5, 7354 (PXPCS_TL_CONTROL_5_ERR_UNSPPORT1 | 7355 PXPCS_TL_CONTROL_5_ERR_UNSPPORT)); 7356 REG_WR(bp, PCICFG_OFFSET + PXPCS_TL_FUNC345_STAT, 7357 (PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT4 | 7358 PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT3 | 7359 PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT2)); 7360 REG_WR(bp, PCICFG_OFFSET + PXPCS_TL_FUNC678_STAT, 7361 (PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT7 | 7362 PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT6 | 7363 PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT5)); 7364 } 7365 7366 bnx2x_init_block(bp, BLOCK_NIG, PHASE_COMMON); 7367 if (!CHIP_IS_E1(bp)) { 7368 /* in E3 this done in per-port section */ 7369 if (!CHIP_IS_E3(bp)) 7370 REG_WR(bp, NIG_REG_LLH_MF_MODE, IS_MF(bp)); 7371 } 7372 if (CHIP_IS_E1H(bp)) 7373 /* not applicable for E2 (and above ...) */ 7374 REG_WR(bp, NIG_REG_LLH_E1HOV_MODE, IS_MF_SD(bp)); 7375 7376 if (CHIP_REV_IS_SLOW(bp)) 7377 msleep(200); 7378 7379 /* finish CFC init */ 7380 val = reg_poll(bp, CFC_REG_LL_INIT_DONE, 1, 100, 10); 7381 if (val != 1) { 7382 BNX2X_ERR("CFC LL_INIT failed\n"); 7383 return -EBUSY; 7384 } 7385 val = reg_poll(bp, CFC_REG_AC_INIT_DONE, 1, 100, 10); 7386 if (val != 1) { 7387 BNX2X_ERR("CFC AC_INIT failed\n"); 7388 return -EBUSY; 7389 } 7390 val = reg_poll(bp, CFC_REG_CAM_INIT_DONE, 1, 100, 10); 7391 if (val != 1) { 7392 BNX2X_ERR("CFC CAM_INIT failed\n"); 7393 return -EBUSY; 7394 } 7395 REG_WR(bp, CFC_REG_DEBUG0, 0); 7396 7397 if (CHIP_IS_E1(bp)) { 7398 /* read NIG statistic 7399 to see if this is our first up since powerup */ 7400 bnx2x_read_dmae(bp, NIG_REG_STAT2_BRB_OCTET, 2); 7401 val = *bnx2x_sp(bp, wb_data[0]); 7402 7403 /* do internal memory self test */ 7404 if ((val == 0) && bnx2x_int_mem_test(bp)) { 7405 BNX2X_ERR("internal mem self test failed\n"); 7406 return -EBUSY; 7407 } 7408 } 7409 7410 bnx2x_setup_fan_failure_detection(bp); 7411 7412 /* clear PXP2 attentions */ 7413 REG_RD(bp, PXP2_REG_PXP2_INT_STS_CLR_0); 7414 7415 bnx2x_enable_blocks_attention(bp); 7416 bnx2x_enable_blocks_parity(bp); 7417 7418 if (!BP_NOMCP(bp)) { 7419 if (CHIP_IS_E1x(bp)) 7420 bnx2x__common_init_phy(bp); 7421 } else 7422 BNX2X_ERR("Bootcode is missing - can not initialize link\n"); 7423 7424 return 0; 7425} 7426 7427/** 7428 * bnx2x_init_hw_common_chip - init HW at the COMMON_CHIP phase. 7429 * 7430 * @bp: driver handle 7431 */ 7432static int bnx2x_init_hw_common_chip(struct bnx2x *bp) 7433{ 7434 int rc = bnx2x_init_hw_common(bp); 7435 7436 if (rc) 7437 return rc; 7438 7439 /* In E2 2-PORT mode, same ext phy is used for the two paths */ 7440 if (!BP_NOMCP(bp)) 7441 bnx2x__common_init_phy(bp); 7442 7443 return 0; 7444} 7445 7446static int bnx2x_init_hw_port(struct bnx2x *bp) 7447{ 7448 int port = BP_PORT(bp); 7449 int init_phase = port ? PHASE_PORT1 : PHASE_PORT0; 7450 u32 low, high; 7451 u32 val, reg; 7452 7453 DP(NETIF_MSG_HW, "starting port init port %d\n", port); 7454 7455 REG_WR(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, 0); 7456 7457 bnx2x_init_block(bp, BLOCK_MISC, init_phase); 7458 bnx2x_init_block(bp, BLOCK_PXP, init_phase); 7459 bnx2x_init_block(bp, BLOCK_PXP2, init_phase); 7460 7461 /* Timers bug workaround: disables the pf_master bit in pglue at 7462 * common phase, we need to enable it here before any dmae access are 7463 * attempted. Therefore we manually added the enable-master to the 7464 * port phase (it also happens in the function phase) 7465 */ 7466 if (!CHIP_IS_E1x(bp)) 7467 REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 1); 7468 7469 bnx2x_init_block(bp, BLOCK_ATC, init_phase); 7470 bnx2x_init_block(bp, BLOCK_DMAE, init_phase); 7471 bnx2x_init_block(bp, BLOCK_PGLUE_B, init_phase); 7472 bnx2x_init_block(bp, BLOCK_QM, init_phase); 7473 7474 bnx2x_init_block(bp, BLOCK_TCM, init_phase); 7475 bnx2x_init_block(bp, BLOCK_UCM, init_phase); 7476 bnx2x_init_block(bp, BLOCK_CCM, init_phase); 7477 bnx2x_init_block(bp, BLOCK_XCM, init_phase); 7478 7479 /* QM cid (connection) count */ 7480 bnx2x_qm_init_cid_count(bp, bp->qm_cid_count, INITOP_SET); 7481 7482 if (CNIC_SUPPORT(bp)) { 7483 bnx2x_init_block(bp, BLOCK_TM, init_phase); 7484 REG_WR(bp, TM_REG_LIN0_SCAN_TIME + port*4, 20); 7485 REG_WR(bp, TM_REG_LIN0_MAX_ACTIVE_CID + port*4, 31); 7486 } 7487 7488 bnx2x_init_block(bp, BLOCK_DORQ, init_phase); 7489 7490 bnx2x_init_block(bp, BLOCK_BRB1, init_phase); 7491 7492 if (CHIP_IS_E1(bp) || CHIP_IS_E1H(bp)) { 7493 7494 if (IS_MF(bp)) 7495 low = ((bp->flags & ONE_PORT_FLAG) ? 160 : 246); 7496 else if (bp->dev->mtu > 4096) { 7497 if (bp->flags & ONE_PORT_FLAG) 7498 low = 160; 7499 else { 7500 val = bp->dev->mtu; 7501 /* (24*1024 + val*4)/256 */ 7502 low = 96 + (val/64) + 7503 ((val % 64) ? 1 : 0); 7504 } 7505 } else 7506 low = ((bp->flags & ONE_PORT_FLAG) ? 80 : 160); 7507 high = low + 56; /* 14*1024/256 */ 7508 REG_WR(bp, BRB1_REG_PAUSE_LOW_THRESHOLD_0 + port*4, low); 7509 REG_WR(bp, BRB1_REG_PAUSE_HIGH_THRESHOLD_0 + port*4, high); 7510 } 7511 7512 if (CHIP_MODE_IS_4_PORT(bp)) 7513 REG_WR(bp, (BP_PORT(bp) ? 7514 BRB1_REG_MAC_GUARANTIED_1 : 7515 BRB1_REG_MAC_GUARANTIED_0), 40); 7516 7517 bnx2x_init_block(bp, BLOCK_PRS, init_phase); 7518 if (CHIP_IS_E3B0(bp)) { 7519 if (IS_MF_AFEX(bp)) { 7520 /* configure headers for AFEX mode */ 7521 REG_WR(bp, BP_PORT(bp) ? 7522 PRS_REG_HDRS_AFTER_BASIC_PORT_1 : 7523 PRS_REG_HDRS_AFTER_BASIC_PORT_0, 0xE); 7524 REG_WR(bp, BP_PORT(bp) ? 7525 PRS_REG_HDRS_AFTER_TAG_0_PORT_1 : 7526 PRS_REG_HDRS_AFTER_TAG_0_PORT_0, 0x6); 7527 REG_WR(bp, BP_PORT(bp) ? 7528 PRS_REG_MUST_HAVE_HDRS_PORT_1 : 7529 PRS_REG_MUST_HAVE_HDRS_PORT_0, 0xA); 7530 } else { 7531 /* Ovlan exists only if we are in multi-function + 7532 * switch-dependent mode, in switch-independent there 7533 * is no ovlan headers 7534 */ 7535 REG_WR(bp, BP_PORT(bp) ? 7536 PRS_REG_HDRS_AFTER_BASIC_PORT_1 : 7537 PRS_REG_HDRS_AFTER_BASIC_PORT_0, 7538 (bp->path_has_ovlan ? 7 : 6)); 7539 } 7540 } 7541 7542 bnx2x_init_block(bp, BLOCK_TSDM, init_phase); 7543 bnx2x_init_block(bp, BLOCK_CSDM, init_phase); 7544 bnx2x_init_block(bp, BLOCK_USDM, init_phase); 7545 bnx2x_init_block(bp, BLOCK_XSDM, init_phase); 7546 7547 bnx2x_init_block(bp, BLOCK_TSEM, init_phase); 7548 bnx2x_init_block(bp, BLOCK_USEM, init_phase); 7549 bnx2x_init_block(bp, BLOCK_CSEM, init_phase); 7550 bnx2x_init_block(bp, BLOCK_XSEM, init_phase); 7551 7552 bnx2x_init_block(bp, BLOCK_UPB, init_phase); 7553 bnx2x_init_block(bp, BLOCK_XPB, init_phase); 7554 7555 bnx2x_init_block(bp, BLOCK_PBF, init_phase); 7556 7557 if (CHIP_IS_E1x(bp)) { 7558 /* configure PBF to work without PAUSE mtu 9000 */ 7559 REG_WR(bp, PBF_REG_P0_PAUSE_ENABLE + port*4, 0); 7560 7561 /* update threshold */ 7562 REG_WR(bp, PBF_REG_P0_ARB_THRSH + port*4, (9040/16)); 7563 /* update init credit */ 7564 REG_WR(bp, PBF_REG_P0_INIT_CRD + port*4, (9040/16) + 553 - 22); 7565 7566 /* probe changes */ 7567 REG_WR(bp, PBF_REG_INIT_P0 + port*4, 1); 7568 udelay(50); 7569 REG_WR(bp, PBF_REG_INIT_P0 + port*4, 0); 7570 } 7571 7572 if (CNIC_SUPPORT(bp)) 7573 bnx2x_init_block(bp, BLOCK_SRC, init_phase); 7574 7575 bnx2x_init_block(bp, BLOCK_CDU, init_phase); 7576 bnx2x_init_block(bp, BLOCK_CFC, init_phase); 7577 7578 if (CHIP_IS_E1(bp)) { 7579 REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, 0); 7580 REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, 0); 7581 } 7582 bnx2x_init_block(bp, BLOCK_HC, init_phase); 7583 7584 bnx2x_init_block(bp, BLOCK_IGU, init_phase); 7585 7586 bnx2x_init_block(bp, BLOCK_MISC_AEU, init_phase); 7587 /* init aeu_mask_attn_func_0/1: 7588 * - SF mode: bits 3-7 are masked. Only bits 0-2 are in use 7589 * - MF mode: bit 3 is masked. Bits 0-2 are in use as in SF 7590 * bits 4-7 are used for "per vn group attention" */ 7591 val = IS_MF(bp) ? 0xF7 : 0x7; 7592 /* Enable DCBX attention for all but E1 */ 7593 val |= CHIP_IS_E1(bp) ? 0 : 0x10; 7594 REG_WR(bp, MISC_REG_AEU_MASK_ATTN_FUNC_0 + port*4, val); 7595 7596 /* SCPAD_PARITY should NOT trigger close the gates */ 7597 reg = port ? MISC_REG_AEU_ENABLE4_NIG_1 : MISC_REG_AEU_ENABLE4_NIG_0; 7598 REG_WR(bp, reg, 7599 REG_RD(bp, reg) & 7600 ~AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY); 7601 7602 reg = port ? MISC_REG_AEU_ENABLE4_PXP_1 : MISC_REG_AEU_ENABLE4_PXP_0; 7603 REG_WR(bp, reg, 7604 REG_RD(bp, reg) & 7605 ~AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY); 7606 7607 bnx2x_init_block(bp, BLOCK_NIG, init_phase); 7608 7609 if (!CHIP_IS_E1x(bp)) { 7610 /* Bit-map indicating which L2 hdrs may appear after the 7611 * basic Ethernet header 7612 */ 7613 if (IS_MF_AFEX(bp)) 7614 REG_WR(bp, BP_PORT(bp) ? 7615 NIG_REG_P1_HDRS_AFTER_BASIC : 7616 NIG_REG_P0_HDRS_AFTER_BASIC, 0xE); 7617 else 7618 REG_WR(bp, BP_PORT(bp) ? 7619 NIG_REG_P1_HDRS_AFTER_BASIC : 7620 NIG_REG_P0_HDRS_AFTER_BASIC, 7621 IS_MF_SD(bp) ? 7 : 6); 7622 7623 if (CHIP_IS_E3(bp)) 7624 REG_WR(bp, BP_PORT(bp) ? 7625 NIG_REG_LLH1_MF_MODE : 7626 NIG_REG_LLH_MF_MODE, IS_MF(bp)); 7627 } 7628 if (!CHIP_IS_E3(bp)) 7629 REG_WR(bp, NIG_REG_XGXS_SERDES0_MODE_SEL + port*4, 1); 7630 7631 if (!CHIP_IS_E1(bp)) { 7632 /* 0x2 disable mf_ov, 0x1 enable */ 7633 REG_WR(bp, NIG_REG_LLH0_BRB1_DRV_MASK_MF + port*4, 7634 (IS_MF_SD(bp) ? 0x1 : 0x2)); 7635 7636 if (!CHIP_IS_E1x(bp)) { 7637 val = 0; 7638 switch (bp->mf_mode) { 7639 case MULTI_FUNCTION_SD: 7640 val = 1; 7641 break; 7642 case MULTI_FUNCTION_SI: 7643 case MULTI_FUNCTION_AFEX: 7644 val = 2; 7645 break; 7646 } 7647 7648 REG_WR(bp, (BP_PORT(bp) ? NIG_REG_LLH1_CLS_TYPE : 7649 NIG_REG_LLH0_CLS_TYPE), val); 7650 } 7651 { 7652 REG_WR(bp, NIG_REG_LLFC_ENABLE_0 + port*4, 0); 7653 REG_WR(bp, NIG_REG_LLFC_OUT_EN_0 + port*4, 0); 7654 REG_WR(bp, NIG_REG_PAUSE_ENABLE_0 + port*4, 1); 7655 } 7656 } 7657 7658 /* If SPIO5 is set to generate interrupts, enable it for this port */ 7659 val = REG_RD(bp, MISC_REG_SPIO_EVENT_EN); 7660 if (val & MISC_SPIO_SPIO5) { 7661 u32 reg_addr = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 : 7662 MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0); 7663 val = REG_RD(bp, reg_addr); 7664 val |= AEU_INPUTS_ATTN_BITS_SPIO5; 7665 REG_WR(bp, reg_addr, val); 7666 } 7667 7668 return 0; 7669} 7670 7671static void bnx2x_ilt_wr(struct bnx2x *bp, u32 index, dma_addr_t addr) 7672{ 7673 int reg; 7674 u32 wb_write[2]; 7675 7676 if (CHIP_IS_E1(bp)) 7677 reg = PXP2_REG_RQ_ONCHIP_AT + index*8; 7678 else 7679 reg = PXP2_REG_RQ_ONCHIP_AT_B0 + index*8; 7680 7681 wb_write[0] = ONCHIP_ADDR1(addr); 7682 wb_write[1] = ONCHIP_ADDR2(addr); 7683 REG_WR_DMAE(bp, reg, wb_write, 2); 7684} 7685 7686void bnx2x_igu_clear_sb_gen(struct bnx2x *bp, u8 func, u8 idu_sb_id, bool is_pf) 7687{ 7688 u32 data, ctl, cnt = 100; 7689 u32 igu_addr_data = IGU_REG_COMMAND_REG_32LSB_DATA; 7690 u32 igu_addr_ctl = IGU_REG_COMMAND_REG_CTRL; 7691 u32 igu_addr_ack = IGU_REG_CSTORM_TYPE_0_SB_CLEANUP + (idu_sb_id/32)*4; 7692 u32 sb_bit = 1 << (idu_sb_id%32); 7693 u32 func_encode = func | (is_pf ? 1 : 0) << IGU_FID_ENCODE_IS_PF_SHIFT; 7694 u32 addr_encode = IGU_CMD_E2_PROD_UPD_BASE + idu_sb_id; 7695 7696 /* Not supported in BC mode */ 7697 if (CHIP_INT_MODE_IS_BC(bp)) 7698 return; 7699 7700 data = (IGU_USE_REGISTER_cstorm_type_0_sb_cleanup 7701 << IGU_REGULAR_CLEANUP_TYPE_SHIFT) | 7702 IGU_REGULAR_CLEANUP_SET | 7703 IGU_REGULAR_BCLEANUP; 7704 7705 ctl = addr_encode << IGU_CTRL_REG_ADDRESS_SHIFT | 7706 func_encode << IGU_CTRL_REG_FID_SHIFT | 7707 IGU_CTRL_CMD_TYPE_WR << IGU_CTRL_REG_TYPE_SHIFT; 7708 7709 DP(NETIF_MSG_HW, "write 0x%08x to IGU(via GRC) addr 0x%x\n", 7710 data, igu_addr_data); 7711 REG_WR(bp, igu_addr_data, data); 7712 mmiowb(); 7713 barrier(); 7714 DP(NETIF_MSG_HW, "write 0x%08x to IGU(via GRC) addr 0x%x\n", 7715 ctl, igu_addr_ctl); 7716 REG_WR(bp, igu_addr_ctl, ctl); 7717 mmiowb(); 7718 barrier(); 7719 7720 /* wait for clean up to finish */ 7721 while (!(REG_RD(bp, igu_addr_ack) & sb_bit) && --cnt) 7722 msleep(20); 7723 7724 if (!(REG_RD(bp, igu_addr_ack) & sb_bit)) { 7725 DP(NETIF_MSG_HW, 7726 "Unable to finish IGU cleanup: idu_sb_id %d offset %d bit %d (cnt %d)\n", 7727 idu_sb_id, idu_sb_id/32, idu_sb_id%32, cnt); 7728 } 7729} 7730 7731static void bnx2x_igu_clear_sb(struct bnx2x *bp, u8 idu_sb_id) 7732{ 7733 bnx2x_igu_clear_sb_gen(bp, BP_FUNC(bp), idu_sb_id, true /*PF*/); 7734} 7735 7736static void bnx2x_clear_func_ilt(struct bnx2x *bp, u32 func) 7737{ 7738 u32 i, base = FUNC_ILT_BASE(func); 7739 for (i = base; i < base + ILT_PER_FUNC; i++) 7740 bnx2x_ilt_wr(bp, i, 0); 7741} 7742 7743static void bnx2x_init_searcher(struct bnx2x *bp) 7744{ 7745 int port = BP_PORT(bp); 7746 bnx2x_src_init_t2(bp, bp->t2, bp->t2_mapping, SRC_CONN_NUM); 7747 /* T1 hash bits value determines the T1 number of entries */ 7748 REG_WR(bp, SRC_REG_NUMBER_HASH_BITS0 + port*4, SRC_HASH_BITS); 7749} 7750 7751static inline int bnx2x_func_switch_update(struct bnx2x *bp, int suspend) 7752{ 7753 int rc; 7754 struct bnx2x_func_state_params func_params = {NULL}; 7755 struct bnx2x_func_switch_update_params *switch_update_params = 7756 &func_params.params.switch_update; 7757 7758 /* Prepare parameters for function state transitions */ 7759 __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags); 7760 __set_bit(RAMROD_RETRY, &func_params.ramrod_flags); 7761 7762 func_params.f_obj = &bp->func_obj; 7763 func_params.cmd = BNX2X_F_CMD_SWITCH_UPDATE; 7764 7765 /* Function parameters */ 7766 __set_bit(BNX2X_F_UPDATE_TX_SWITCH_SUSPEND_CHNG, 7767 &switch_update_params->changes); 7768 if (suspend) 7769 __set_bit(BNX2X_F_UPDATE_TX_SWITCH_SUSPEND, 7770 &switch_update_params->changes); 7771 7772 rc = bnx2x_func_state_change(bp, &func_params); 7773 7774 return rc; 7775} 7776 7777static int bnx2x_reset_nic_mode(struct bnx2x *bp) 7778{ 7779 int rc, i, port = BP_PORT(bp); 7780 int vlan_en = 0, mac_en[NUM_MACS]; 7781 7782 /* Close input from network */ 7783 if (bp->mf_mode == SINGLE_FUNCTION) { 7784 bnx2x_set_rx_filter(&bp->link_params, 0); 7785 } else { 7786 vlan_en = REG_RD(bp, port ? NIG_REG_LLH1_FUNC_EN : 7787 NIG_REG_LLH0_FUNC_EN); 7788 REG_WR(bp, port ? NIG_REG_LLH1_FUNC_EN : 7789 NIG_REG_LLH0_FUNC_EN, 0); 7790 for (i = 0; i < NUM_MACS; i++) { 7791 mac_en[i] = REG_RD(bp, port ? 7792 (NIG_REG_LLH1_FUNC_MEM_ENABLE + 7793 4 * i) : 7794 (NIG_REG_LLH0_FUNC_MEM_ENABLE + 7795 4 * i)); 7796 REG_WR(bp, port ? (NIG_REG_LLH1_FUNC_MEM_ENABLE + 7797 4 * i) : 7798 (NIG_REG_LLH0_FUNC_MEM_ENABLE + 4 * i), 0); 7799 } 7800 } 7801 7802 /* Close BMC to host */ 7803 REG_WR(bp, port ? NIG_REG_P0_TX_MNG_HOST_ENABLE : 7804 NIG_REG_P1_TX_MNG_HOST_ENABLE, 0); 7805 7806 /* Suspend Tx switching to the PF. Completion of this ramrod 7807 * further guarantees that all the packets of that PF / child 7808 * VFs in BRB were processed by the Parser, so it is safe to 7809 * change the NIC_MODE register. 7810 */ 7811 rc = bnx2x_func_switch_update(bp, 1); 7812 if (rc) { 7813 BNX2X_ERR("Can't suspend tx-switching!\n"); 7814 return rc; 7815 } 7816 7817 /* Change NIC_MODE register */ 7818 REG_WR(bp, PRS_REG_NIC_MODE, 0); 7819 7820 /* Open input from network */ 7821 if (bp->mf_mode == SINGLE_FUNCTION) { 7822 bnx2x_set_rx_filter(&bp->link_params, 1); 7823 } else { 7824 REG_WR(bp, port ? NIG_REG_LLH1_FUNC_EN : 7825 NIG_REG_LLH0_FUNC_EN, vlan_en); 7826 for (i = 0; i < NUM_MACS; i++) { 7827 REG_WR(bp, port ? (NIG_REG_LLH1_FUNC_MEM_ENABLE + 7828 4 * i) : 7829 (NIG_REG_LLH0_FUNC_MEM_ENABLE + 4 * i), 7830 mac_en[i]); 7831 } 7832 } 7833 7834 /* Enable BMC to host */ 7835 REG_WR(bp, port ? NIG_REG_P0_TX_MNG_HOST_ENABLE : 7836 NIG_REG_P1_TX_MNG_HOST_ENABLE, 1); 7837 7838 /* Resume Tx switching to the PF */ 7839 rc = bnx2x_func_switch_update(bp, 0); 7840 if (rc) { 7841 BNX2X_ERR("Can't resume tx-switching!\n"); 7842 return rc; 7843 } 7844 7845 DP(NETIF_MSG_IFUP, "NIC MODE disabled\n"); 7846 return 0; 7847} 7848 7849int bnx2x_init_hw_func_cnic(struct bnx2x *bp) 7850{ 7851 int rc; 7852 7853 bnx2x_ilt_init_op_cnic(bp, INITOP_SET); 7854 7855 if (CONFIGURE_NIC_MODE(bp)) { 7856 /* Configure searcher as part of function hw init */ 7857 bnx2x_init_searcher(bp); 7858 7859 /* Reset NIC mode */ 7860 rc = bnx2x_reset_nic_mode(bp); 7861 if (rc) 7862 BNX2X_ERR("Can't change NIC mode!\n"); 7863 return rc; 7864 } 7865 7866 return 0; 7867} 7868 7869/* previous driver DMAE transaction may have occurred when pre-boot stage ended 7870 * and boot began, or when kdump kernel was loaded. Either case would invalidate 7871 * the addresses of the transaction, resulting in was-error bit set in the pci 7872 * causing all hw-to-host pcie transactions to timeout. If this happened we want 7873 * to clear the interrupt which detected this from the pglueb and the was done 7874 * bit 7875 */ 7876static void bnx2x_clean_pglue_errors(struct bnx2x *bp) 7877{ 7878 if (!CHIP_IS_E1x(bp)) 7879 REG_WR(bp, PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR, 7880 1 << BP_ABS_FUNC(bp)); 7881} 7882 7883static int bnx2x_init_hw_func(struct bnx2x *bp) 7884{ 7885 int port = BP_PORT(bp); 7886 int func = BP_FUNC(bp); 7887 int init_phase = PHASE_PF0 + func; 7888 struct bnx2x_ilt *ilt = BP_ILT(bp); 7889 u16 cdu_ilt_start; 7890 u32 addr, val; 7891 u32 main_mem_base, main_mem_size, main_mem_prty_clr; 7892 int i, main_mem_width, rc; 7893 7894 DP(NETIF_MSG_HW, "starting func init func %d\n", func); 7895 7896 /* FLR cleanup - hmmm */ 7897 if (!CHIP_IS_E1x(bp)) { 7898 rc = bnx2x_pf_flr_clnup(bp); 7899 if (rc) { 7900 bnx2x_fw_dump(bp); 7901 return rc; 7902 } 7903 } 7904 7905 /* set MSI reconfigure capability */ 7906 if (bp->common.int_block == INT_BLOCK_HC) { 7907 addr = (port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0); 7908 val = REG_RD(bp, addr); 7909 val |= HC_CONFIG_0_REG_MSI_ATTN_EN_0; 7910 REG_WR(bp, addr, val); 7911 } 7912 7913 bnx2x_init_block(bp, BLOCK_PXP, init_phase); 7914 bnx2x_init_block(bp, BLOCK_PXP2, init_phase); 7915 7916 ilt = BP_ILT(bp); 7917 cdu_ilt_start = ilt->clients[ILT_CLIENT_CDU].start; 7918 7919 if (IS_SRIOV(bp)) 7920 cdu_ilt_start += BNX2X_FIRST_VF_CID/ILT_PAGE_CIDS; 7921 cdu_ilt_start = bnx2x_iov_init_ilt(bp, cdu_ilt_start); 7922 7923 /* since BNX2X_FIRST_VF_CID > 0 the PF L2 cids precedes 7924 * those of the VFs, so start line should be reset 7925 */ 7926 cdu_ilt_start = ilt->clients[ILT_CLIENT_CDU].start; 7927 for (i = 0; i < L2_ILT_LINES(bp); i++) { 7928 ilt->lines[cdu_ilt_start + i].page = bp->context[i].vcxt; 7929 ilt->lines[cdu_ilt_start + i].page_mapping = 7930 bp->context[i].cxt_mapping; 7931 ilt->lines[cdu_ilt_start + i].size = bp->context[i].size; 7932 } 7933 7934 bnx2x_ilt_init_op(bp, INITOP_SET); 7935 7936 if (!CONFIGURE_NIC_MODE(bp)) { 7937 bnx2x_init_searcher(bp); 7938 REG_WR(bp, PRS_REG_NIC_MODE, 0); 7939 DP(NETIF_MSG_IFUP, "NIC MODE disabled\n"); 7940 } else { 7941 /* Set NIC mode */ 7942 REG_WR(bp, PRS_REG_NIC_MODE, 1); 7943 DP(NETIF_MSG_IFUP, "NIC MODE configured\n"); 7944 } 7945 7946 if (!CHIP_IS_E1x(bp)) { 7947 u32 pf_conf = IGU_PF_CONF_FUNC_EN; 7948 7949 /* Turn on a single ISR mode in IGU if driver is going to use 7950 * INT#x or MSI 7951 */ 7952 if (!(bp->flags & USING_MSIX_FLAG)) 7953 pf_conf |= IGU_PF_CONF_SINGLE_ISR_EN; 7954 /* 7955 * Timers workaround bug: function init part. 7956 * Need to wait 20msec after initializing ILT, 7957 * needed to make sure there are no requests in 7958 * one of the PXP internal queues with "old" ILT addresses 7959 */ 7960 msleep(20); 7961 /* 7962 * Master enable - Due to WB DMAE writes performed before this 7963 * register is re-initialized as part of the regular function 7964 * init 7965 */ 7966 REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 1); 7967 /* Enable the function in IGU */ 7968 REG_WR(bp, IGU_REG_PF_CONFIGURATION, pf_conf); 7969 } 7970 7971 bp->dmae_ready = 1; 7972 7973 bnx2x_init_block(bp, BLOCK_PGLUE_B, init_phase); 7974 7975 bnx2x_clean_pglue_errors(bp); 7976 7977 bnx2x_init_block(bp, BLOCK_ATC, init_phase); 7978 bnx2x_init_block(bp, BLOCK_DMAE, init_phase); 7979 bnx2x_init_block(bp, BLOCK_NIG, init_phase); 7980 bnx2x_init_block(bp, BLOCK_SRC, init_phase); 7981 bnx2x_init_block(bp, BLOCK_MISC, init_phase); 7982 bnx2x_init_block(bp, BLOCK_TCM, init_phase); 7983 bnx2x_init_block(bp, BLOCK_UCM, init_phase); 7984 bnx2x_init_block(bp, BLOCK_CCM, init_phase); 7985 bnx2x_init_block(bp, BLOCK_XCM, init_phase); 7986 bnx2x_init_block(bp, BLOCK_TSEM, init_phase); 7987 bnx2x_init_block(bp, BLOCK_USEM, init_phase); 7988 bnx2x_init_block(bp, BLOCK_CSEM, init_phase); 7989 bnx2x_init_block(bp, BLOCK_XSEM, init_phase); 7990 7991 if (!CHIP_IS_E1x(bp)) 7992 REG_WR(bp, QM_REG_PF_EN, 1); 7993 7994 if (!CHIP_IS_E1x(bp)) { 7995 REG_WR(bp, TSEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func); 7996 REG_WR(bp, USEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func); 7997 REG_WR(bp, CSEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func); 7998 REG_WR(bp, XSEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func); 7999 } 8000 bnx2x_init_block(bp, BLOCK_QM, init_phase); 8001 8002 bnx2x_init_block(bp, BLOCK_TM, init_phase); 8003 bnx2x_init_block(bp, BLOCK_DORQ, init_phase); 8004 REG_WR(bp, DORQ_REG_MODE_ACT, 1); /* no dpm */ 8005 8006 bnx2x_iov_init_dq(bp); 8007 8008 bnx2x_init_block(bp, BLOCK_BRB1, init_phase); 8009 bnx2x_init_block(bp, BLOCK_PRS, init_phase); 8010 bnx2x_init_block(bp, BLOCK_TSDM, init_phase); 8011 bnx2x_init_block(bp, BLOCK_CSDM, init_phase); 8012 bnx2x_init_block(bp, BLOCK_USDM, init_phase); 8013 bnx2x_init_block(bp, BLOCK_XSDM, init_phase); 8014 bnx2x_init_block(bp, BLOCK_UPB, init_phase); 8015 bnx2x_init_block(bp, BLOCK_XPB, init_phase); 8016 bnx2x_init_block(bp, BLOCK_PBF, init_phase); 8017 if (!CHIP_IS_E1x(bp)) 8018 REG_WR(bp, PBF_REG_DISABLE_PF, 0); 8019 8020 bnx2x_init_block(bp, BLOCK_CDU, init_phase); 8021 8022 bnx2x_init_block(bp, BLOCK_CFC, init_phase); 8023 8024 if (!CHIP_IS_E1x(bp)) 8025 REG_WR(bp, CFC_REG_WEAK_ENABLE_PF, 1); 8026 8027 if (IS_MF(bp)) { 8028 if (!(IS_MF_UFP(bp) && BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp))) { 8029 REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port * 8, 1); 8030 REG_WR(bp, NIG_REG_LLH0_FUNC_VLAN_ID + port * 8, 8031 bp->mf_ov); 8032 } 8033 } 8034 8035 bnx2x_init_block(bp, BLOCK_MISC_AEU, init_phase); 8036 8037 /* HC init per function */ 8038 if (bp->common.int_block == INT_BLOCK_HC) { 8039 if (CHIP_IS_E1H(bp)) { 8040 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_12 + func*4, 0); 8041 8042 REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, 0); 8043 REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, 0); 8044 } 8045 bnx2x_init_block(bp, BLOCK_HC, init_phase); 8046 8047 } else { 8048 int num_segs, sb_idx, prod_offset; 8049 8050 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_12 + func*4, 0); 8051 8052 if (!CHIP_IS_E1x(bp)) { 8053 REG_WR(bp, IGU_REG_LEADING_EDGE_LATCH, 0); 8054 REG_WR(bp, IGU_REG_TRAILING_EDGE_LATCH, 0); 8055 } 8056 8057 bnx2x_init_block(bp, BLOCK_IGU, init_phase); 8058 8059 if (!CHIP_IS_E1x(bp)) { 8060 int dsb_idx = 0; 8061 /** 8062 * Producer memory: 8063 * E2 mode: address 0-135 match to the mapping memory; 8064 * 136 - PF0 default prod; 137 - PF1 default prod; 8065 * 138 - PF2 default prod; 139 - PF3 default prod; 8066 * 140 - PF0 attn prod; 141 - PF1 attn prod; 8067 * 142 - PF2 attn prod; 143 - PF3 attn prod; 8068 * 144-147 reserved. 8069 * 8070 * E1.5 mode - In backward compatible mode; 8071 * for non default SB; each even line in the memory 8072 * holds the U producer and each odd line hold 8073 * the C producer. The first 128 producers are for 8074 * NDSB (PF0 - 0-31; PF1 - 32-63 and so on). The last 20 8075 * producers are for the DSB for each PF. 8076 * Each PF has five segments: (the order inside each 8077 * segment is PF0; PF1; PF2; PF3) - 128-131 U prods; 8078 * 132-135 C prods; 136-139 X prods; 140-143 T prods; 8079 * 144-147 attn prods; 8080 */ 8081 /* non-default-status-blocks */ 8082 num_segs = CHIP_INT_MODE_IS_BC(bp) ? 8083 IGU_BC_NDSB_NUM_SEGS : IGU_NORM_NDSB_NUM_SEGS; 8084 for (sb_idx = 0; sb_idx < bp->igu_sb_cnt; sb_idx++) { 8085 prod_offset = (bp->igu_base_sb + sb_idx) * 8086 num_segs; 8087 8088 for (i = 0; i < num_segs; i++) { 8089 addr = IGU_REG_PROD_CONS_MEMORY + 8090 (prod_offset + i) * 4; 8091 REG_WR(bp, addr, 0); 8092 } 8093 /* send consumer update with value 0 */ 8094 bnx2x_ack_sb(bp, bp->igu_base_sb + sb_idx, 8095 USTORM_ID, 0, IGU_INT_NOP, 1); 8096 bnx2x_igu_clear_sb(bp, 8097 bp->igu_base_sb + sb_idx); 8098 } 8099 8100 /* default-status-blocks */ 8101 num_segs = CHIP_INT_MODE_IS_BC(bp) ? 8102 IGU_BC_DSB_NUM_SEGS : IGU_NORM_DSB_NUM_SEGS; 8103 8104 if (CHIP_MODE_IS_4_PORT(bp)) 8105 dsb_idx = BP_FUNC(bp); 8106 else 8107 dsb_idx = BP_VN(bp); 8108 8109 prod_offset = (CHIP_INT_MODE_IS_BC(bp) ? 8110 IGU_BC_BASE_DSB_PROD + dsb_idx : 8111 IGU_NORM_BASE_DSB_PROD + dsb_idx); 8112 8113 /* 8114 * igu prods come in chunks of E1HVN_MAX (4) - 8115 * does not matters what is the current chip mode 8116 */ 8117 for (i = 0; i < (num_segs * E1HVN_MAX); 8118 i += E1HVN_MAX) { 8119 addr = IGU_REG_PROD_CONS_MEMORY + 8120 (prod_offset + i)*4; 8121 REG_WR(bp, addr, 0); 8122 } 8123 /* send consumer update with 0 */ 8124 if (CHIP_INT_MODE_IS_BC(bp)) { 8125 bnx2x_ack_sb(bp, bp->igu_dsb_id, 8126 USTORM_ID, 0, IGU_INT_NOP, 1); 8127 bnx2x_ack_sb(bp, bp->igu_dsb_id, 8128 CSTORM_ID, 0, IGU_INT_NOP, 1); 8129 bnx2x_ack_sb(bp, bp->igu_dsb_id, 8130 XSTORM_ID, 0, IGU_INT_NOP, 1); 8131 bnx2x_ack_sb(bp, bp->igu_dsb_id, 8132 TSTORM_ID, 0, IGU_INT_NOP, 1); 8133 bnx2x_ack_sb(bp, bp->igu_dsb_id, 8134 ATTENTION_ID, 0, IGU_INT_NOP, 1); 8135 } else { 8136 bnx2x_ack_sb(bp, bp->igu_dsb_id, 8137 USTORM_ID, 0, IGU_INT_NOP, 1); 8138 bnx2x_ack_sb(bp, bp->igu_dsb_id, 8139 ATTENTION_ID, 0, IGU_INT_NOP, 1); 8140 } 8141 bnx2x_igu_clear_sb(bp, bp->igu_dsb_id); 8142 8143 /* !!! These should become driver const once 8144 rf-tool supports split-68 const */ 8145 REG_WR(bp, IGU_REG_SB_INT_BEFORE_MASK_LSB, 0); 8146 REG_WR(bp, IGU_REG_SB_INT_BEFORE_MASK_MSB, 0); 8147 REG_WR(bp, IGU_REG_SB_MASK_LSB, 0); 8148 REG_WR(bp, IGU_REG_SB_MASK_MSB, 0); 8149 REG_WR(bp, IGU_REG_PBA_STATUS_LSB, 0); 8150 REG_WR(bp, IGU_REG_PBA_STATUS_MSB, 0); 8151 } 8152 } 8153 8154 /* Reset PCIE errors for debug */ 8155 REG_WR(bp, 0x2114, 0xffffffff); 8156 REG_WR(bp, 0x2120, 0xffffffff); 8157 8158 if (CHIP_IS_E1x(bp)) { 8159 main_mem_size = HC_REG_MAIN_MEMORY_SIZE / 2; /*dwords*/ 8160 main_mem_base = HC_REG_MAIN_MEMORY + 8161 BP_PORT(bp) * (main_mem_size * 4); 8162 main_mem_prty_clr = HC_REG_HC_PRTY_STS_CLR; 8163 main_mem_width = 8; 8164 8165 val = REG_RD(bp, main_mem_prty_clr); 8166 if (val) 8167 DP(NETIF_MSG_HW, 8168 "Hmmm... Parity errors in HC block during function init (0x%x)!\n", 8169 val); 8170 8171 /* Clear "false" parity errors in MSI-X table */ 8172 for (i = main_mem_base; 8173 i < main_mem_base + main_mem_size * 4; 8174 i += main_mem_width) { 8175 bnx2x_read_dmae(bp, i, main_mem_width / 4); 8176 bnx2x_write_dmae(bp, bnx2x_sp_mapping(bp, wb_data), 8177 i, main_mem_width / 4); 8178 } 8179 /* Clear HC parity attention */ 8180 REG_RD(bp, main_mem_prty_clr); 8181 } 8182 8183#ifdef BNX2X_STOP_ON_ERROR 8184 /* Enable STORMs SP logging */ 8185 REG_WR8(bp, BAR_USTRORM_INTMEM + 8186 USTORM_RECORD_SLOW_PATH_OFFSET(BP_FUNC(bp)), 1); 8187 REG_WR8(bp, BAR_TSTRORM_INTMEM + 8188 TSTORM_RECORD_SLOW_PATH_OFFSET(BP_FUNC(bp)), 1); 8189 REG_WR8(bp, BAR_CSTRORM_INTMEM + 8190 CSTORM_RECORD_SLOW_PATH_OFFSET(BP_FUNC(bp)), 1); 8191 REG_WR8(bp, BAR_XSTRORM_INTMEM + 8192 XSTORM_RECORD_SLOW_PATH_OFFSET(BP_FUNC(bp)), 1); 8193#endif 8194 8195 bnx2x_phy_probe(&bp->link_params); 8196 8197 return 0; 8198} 8199 8200void bnx2x_free_mem_cnic(struct bnx2x *bp) 8201{ 8202 bnx2x_ilt_mem_op_cnic(bp, ILT_MEMOP_FREE); 8203 8204 if (!CHIP_IS_E1x(bp)) 8205 BNX2X_PCI_FREE(bp->cnic_sb.e2_sb, bp->cnic_sb_mapping, 8206 sizeof(struct host_hc_status_block_e2)); 8207 else 8208 BNX2X_PCI_FREE(bp->cnic_sb.e1x_sb, bp->cnic_sb_mapping, 8209 sizeof(struct host_hc_status_block_e1x)); 8210 8211 BNX2X_PCI_FREE(bp->t2, bp->t2_mapping, SRC_T2_SZ); 8212} 8213 8214void bnx2x_free_mem(struct bnx2x *bp) 8215{ 8216 int i; 8217 8218 BNX2X_PCI_FREE(bp->fw_stats, bp->fw_stats_mapping, 8219 bp->fw_stats_data_sz + bp->fw_stats_req_sz); 8220 8221 if (IS_VF(bp)) 8222 return; 8223 8224 BNX2X_PCI_FREE(bp->def_status_blk, bp->def_status_blk_mapping, 8225 sizeof(struct host_sp_status_block)); 8226 8227 BNX2X_PCI_FREE(bp->slowpath, bp->slowpath_mapping, 8228 sizeof(struct bnx2x_slowpath)); 8229 8230 for (i = 0; i < L2_ILT_LINES(bp); i++) 8231 BNX2X_PCI_FREE(bp->context[i].vcxt, bp->context[i].cxt_mapping, 8232 bp->context[i].size); 8233 bnx2x_ilt_mem_op(bp, ILT_MEMOP_FREE); 8234 8235 BNX2X_FREE(bp->ilt->lines); 8236 8237 BNX2X_PCI_FREE(bp->spq, bp->spq_mapping, BCM_PAGE_SIZE); 8238 8239 BNX2X_PCI_FREE(bp->eq_ring, bp->eq_mapping, 8240 BCM_PAGE_SIZE * NUM_EQ_PAGES); 8241 8242 BNX2X_PCI_FREE(bp->t2, bp->t2_mapping, SRC_T2_SZ); 8243 8244 bnx2x_iov_free_mem(bp); 8245} 8246 8247int bnx2x_alloc_mem_cnic(struct bnx2x *bp) 8248{ 8249 if (!CHIP_IS_E1x(bp)) { 8250 /* size = the status block + ramrod buffers */ 8251 bp->cnic_sb.e2_sb = BNX2X_PCI_ALLOC(&bp->cnic_sb_mapping, 8252 sizeof(struct host_hc_status_block_e2)); 8253 if (!bp->cnic_sb.e2_sb) 8254 goto alloc_mem_err; 8255 } else { 8256 bp->cnic_sb.e1x_sb = BNX2X_PCI_ALLOC(&bp->cnic_sb_mapping, 8257 sizeof(struct host_hc_status_block_e1x)); 8258 if (!bp->cnic_sb.e1x_sb) 8259 goto alloc_mem_err; 8260 } 8261 8262 if (CONFIGURE_NIC_MODE(bp) && !bp->t2) { 8263 /* allocate searcher T2 table, as it wasn't allocated before */ 8264 bp->t2 = BNX2X_PCI_ALLOC(&bp->t2_mapping, SRC_T2_SZ); 8265 if (!bp->t2) 8266 goto alloc_mem_err; 8267 } 8268 8269 /* write address to which L5 should insert its values */ 8270 bp->cnic_eth_dev.addr_drv_info_to_mcp = 8271 &bp->slowpath->drv_info_to_mcp; 8272 8273 if (bnx2x_ilt_mem_op_cnic(bp, ILT_MEMOP_ALLOC)) 8274 goto alloc_mem_err; 8275 8276 return 0; 8277 8278alloc_mem_err: 8279 bnx2x_free_mem_cnic(bp); 8280 BNX2X_ERR("Can't allocate memory\n"); 8281 return -ENOMEM; 8282} 8283 8284int bnx2x_alloc_mem(struct bnx2x *bp) 8285{ 8286 int i, allocated, context_size; 8287 8288 if (!CONFIGURE_NIC_MODE(bp) && !bp->t2) { 8289 /* allocate searcher T2 table */ 8290 bp->t2 = BNX2X_PCI_ALLOC(&bp->t2_mapping, SRC_T2_SZ); 8291 if (!bp->t2) 8292 goto alloc_mem_err; 8293 } 8294 8295 bp->def_status_blk = BNX2X_PCI_ALLOC(&bp->def_status_blk_mapping, 8296 sizeof(struct host_sp_status_block)); 8297 if (!bp->def_status_blk) 8298 goto alloc_mem_err; 8299 8300 bp->slowpath = BNX2X_PCI_ALLOC(&bp->slowpath_mapping, 8301 sizeof(struct bnx2x_slowpath)); 8302 if (!bp->slowpath) 8303 goto alloc_mem_err; 8304 8305 /* Allocate memory for CDU context: 8306 * This memory is allocated separately and not in the generic ILT 8307 * functions because CDU differs in few aspects: 8308 * 1. There are multiple entities allocating memory for context - 8309 * 'regular' driver, CNIC and SRIOV driver. Each separately controls 8310 * its own ILT lines. 8311 * 2. Since CDU page-size is not a single 4KB page (which is the case 8312 * for the other ILT clients), to be efficient we want to support 8313 * allocation of sub-page-size in the last entry. 8314 * 3. Context pointers are used by the driver to pass to FW / update 8315 * the context (for the other ILT clients the pointers are used just to 8316 * free the memory during unload). 8317 */ 8318 context_size = sizeof(union cdu_context) * BNX2X_L2_CID_COUNT(bp); 8319 8320 for (i = 0, allocated = 0; allocated < context_size; i++) { 8321 bp->context[i].size = min(CDU_ILT_PAGE_SZ, 8322 (context_size - allocated)); 8323 bp->context[i].vcxt = BNX2X_PCI_ALLOC(&bp->context[i].cxt_mapping, 8324 bp->context[i].size); 8325 if (!bp->context[i].vcxt) 8326 goto alloc_mem_err; 8327 allocated += bp->context[i].size; 8328 } 8329 bp->ilt->lines = kcalloc(ILT_MAX_LINES, sizeof(struct ilt_line), 8330 GFP_KERNEL); 8331 if (!bp->ilt->lines) 8332 goto alloc_mem_err; 8333 8334 if (bnx2x_ilt_mem_op(bp, ILT_MEMOP_ALLOC)) 8335 goto alloc_mem_err; 8336 8337 if (bnx2x_iov_alloc_mem(bp)) 8338 goto alloc_mem_err; 8339 8340 /* Slow path ring */ 8341 bp->spq = BNX2X_PCI_ALLOC(&bp->spq_mapping, BCM_PAGE_SIZE); 8342 if (!bp->spq) 8343 goto alloc_mem_err; 8344 8345 /* EQ */ 8346 bp->eq_ring = BNX2X_PCI_ALLOC(&bp->eq_mapping, 8347 BCM_PAGE_SIZE * NUM_EQ_PAGES); 8348 if (!bp->eq_ring) 8349 goto alloc_mem_err; 8350 8351 return 0; 8352 8353alloc_mem_err: 8354 bnx2x_free_mem(bp); 8355 BNX2X_ERR("Can't allocate memory\n"); 8356 return -ENOMEM; 8357} 8358 8359/* 8360 * Init service functions 8361 */ 8362 8363int bnx2x_set_mac_one(struct bnx2x *bp, u8 *mac, 8364 struct bnx2x_vlan_mac_obj *obj, bool set, 8365 int mac_type, unsigned long *ramrod_flags) 8366{ 8367 int rc; 8368 struct bnx2x_vlan_mac_ramrod_params ramrod_param; 8369 8370 memset(&ramrod_param, 0, sizeof(ramrod_param)); 8371 8372 /* Fill general parameters */ 8373 ramrod_param.vlan_mac_obj = obj; 8374 ramrod_param.ramrod_flags = *ramrod_flags; 8375 8376 /* Fill a user request section if needed */ 8377 if (!test_bit(RAMROD_CONT, ramrod_flags)) { 8378 memcpy(ramrod_param.user_req.u.mac.mac, mac, ETH_ALEN); 8379 8380 __set_bit(mac_type, &ramrod_param.user_req.vlan_mac_flags); 8381 8382 /* Set the command: ADD or DEL */ 8383 if (set) 8384 ramrod_param.user_req.cmd = BNX2X_VLAN_MAC_ADD; 8385 else 8386 ramrod_param.user_req.cmd = BNX2X_VLAN_MAC_DEL; 8387 } 8388 8389 rc = bnx2x_config_vlan_mac(bp, &ramrod_param); 8390 8391 if (rc == -EEXIST) { 8392 DP(BNX2X_MSG_SP, "Failed to schedule ADD operations: %d\n", rc); 8393 /* do not treat adding same MAC as error */ 8394 rc = 0; 8395 } else if (rc < 0) 8396 BNX2X_ERR("%s MAC failed\n", (set ? "Set" : "Del")); 8397 8398 return rc; 8399} 8400 8401int bnx2x_del_all_macs(struct bnx2x *bp, 8402 struct bnx2x_vlan_mac_obj *mac_obj, 8403 int mac_type, bool wait_for_comp) 8404{ 8405 int rc; 8406 unsigned long ramrod_flags = 0, vlan_mac_flags = 0; 8407 8408 /* Wait for completion of requested */ 8409 if (wait_for_comp) 8410 __set_bit(RAMROD_COMP_WAIT, &ramrod_flags); 8411 8412 /* Set the mac type of addresses we want to clear */ 8413 __set_bit(mac_type, &vlan_mac_flags); 8414 8415 rc = mac_obj->delete_all(bp, mac_obj, &vlan_mac_flags, &ramrod_flags); 8416 if (rc < 0) 8417 BNX2X_ERR("Failed to delete MACs: %d\n", rc); 8418 8419 return rc; 8420} 8421 8422int bnx2x_set_eth_mac(struct bnx2x *bp, bool set) 8423{ 8424 if (IS_PF(bp)) { 8425 unsigned long ramrod_flags = 0; 8426 8427 DP(NETIF_MSG_IFUP, "Adding Eth MAC\n"); 8428 __set_bit(RAMROD_COMP_WAIT, &ramrod_flags); 8429 return bnx2x_set_mac_one(bp, bp->dev->dev_addr, 8430 &bp->sp_objs->mac_obj, set, 8431 BNX2X_ETH_MAC, &ramrod_flags); 8432 } else { /* vf */ 8433 return bnx2x_vfpf_config_mac(bp, bp->dev->dev_addr, 8434 bp->fp->index, true); 8435 } 8436} 8437 8438int bnx2x_setup_leading(struct bnx2x *bp) 8439{ 8440 if (IS_PF(bp)) 8441 return bnx2x_setup_queue(bp, &bp->fp[0], true); 8442 else /* VF */ 8443 return bnx2x_vfpf_setup_q(bp, &bp->fp[0], true); 8444} 8445 8446/** 8447 * bnx2x_set_int_mode - configure interrupt mode 8448 * 8449 * @bp: driver handle 8450 * 8451 * In case of MSI-X it will also try to enable MSI-X. 8452 */ 8453int bnx2x_set_int_mode(struct bnx2x *bp) 8454{ 8455 int rc = 0; 8456 8457 if (IS_VF(bp) && int_mode != BNX2X_INT_MODE_MSIX) { 8458 BNX2X_ERR("VF not loaded since interrupt mode not msix\n"); 8459 return -EINVAL; 8460 } 8461 8462 switch (int_mode) { 8463 case BNX2X_INT_MODE_MSIX: 8464 /* attempt to enable msix */ 8465 rc = bnx2x_enable_msix(bp); 8466 8467 /* msix attained */ 8468 if (!rc) 8469 return 0; 8470 8471 /* vfs use only msix */ 8472 if (rc && IS_VF(bp)) 8473 return rc; 8474 8475 /* failed to enable multiple MSI-X */ 8476 BNX2X_DEV_INFO("Failed to enable multiple MSI-X (%d), set number of queues to %d\n", 8477 bp->num_queues, 8478 1 + bp->num_cnic_queues); 8479 8480 /* falling through... */ 8481 case BNX2X_INT_MODE_MSI: 8482 bnx2x_enable_msi(bp); 8483 8484 /* falling through... */ 8485 case BNX2X_INT_MODE_INTX: 8486 bp->num_ethernet_queues = 1; 8487 bp->num_queues = bp->num_ethernet_queues + bp->num_cnic_queues; 8488 BNX2X_DEV_INFO("set number of queues to 1\n"); 8489 break; 8490 default: 8491 BNX2X_DEV_INFO("unknown value in int_mode module parameter\n"); 8492 return -EINVAL; 8493 } 8494 return 0; 8495} 8496 8497/* must be called prior to any HW initializations */ 8498static inline u16 bnx2x_cid_ilt_lines(struct bnx2x *bp) 8499{ 8500 if (IS_SRIOV(bp)) 8501 return (BNX2X_FIRST_VF_CID + BNX2X_VF_CIDS)/ILT_PAGE_CIDS; 8502 return L2_ILT_LINES(bp); 8503} 8504 8505void bnx2x_ilt_set_info(struct bnx2x *bp) 8506{ 8507 struct ilt_client_info *ilt_client; 8508 struct bnx2x_ilt *ilt = BP_ILT(bp); 8509 u16 line = 0; 8510 8511 ilt->start_line = FUNC_ILT_BASE(BP_FUNC(bp)); 8512 DP(BNX2X_MSG_SP, "ilt starts at line %d\n", ilt->start_line); 8513 8514 /* CDU */ 8515 ilt_client = &ilt->clients[ILT_CLIENT_CDU]; 8516 ilt_client->client_num = ILT_CLIENT_CDU; 8517 ilt_client->page_size = CDU_ILT_PAGE_SZ; 8518 ilt_client->flags = ILT_CLIENT_SKIP_MEM; 8519 ilt_client->start = line; 8520 line += bnx2x_cid_ilt_lines(bp); 8521 8522 if (CNIC_SUPPORT(bp)) 8523 line += CNIC_ILT_LINES; 8524 ilt_client->end = line - 1; 8525 8526 DP(NETIF_MSG_IFUP, "ilt client[CDU]: start %d, end %d, psz 0x%x, flags 0x%x, hw psz %d\n", 8527 ilt_client->start, 8528 ilt_client->end, 8529 ilt_client->page_size, 8530 ilt_client->flags, 8531 ilog2(ilt_client->page_size >> 12)); 8532 8533 /* QM */ 8534 if (QM_INIT(bp->qm_cid_count)) { 8535 ilt_client = &ilt->clients[ILT_CLIENT_QM]; 8536 ilt_client->client_num = ILT_CLIENT_QM; 8537 ilt_client->page_size = QM_ILT_PAGE_SZ; 8538 ilt_client->flags = 0; 8539 ilt_client->start = line; 8540 8541 /* 4 bytes for each cid */ 8542 line += DIV_ROUND_UP(bp->qm_cid_count * QM_QUEUES_PER_FUNC * 4, 8543 QM_ILT_PAGE_SZ); 8544 8545 ilt_client->end = line - 1; 8546 8547 DP(NETIF_MSG_IFUP, 8548 "ilt client[QM]: start %d, end %d, psz 0x%x, flags 0x%x, hw psz %d\n", 8549 ilt_client->start, 8550 ilt_client->end, 8551 ilt_client->page_size, 8552 ilt_client->flags, 8553 ilog2(ilt_client->page_size >> 12)); 8554 } 8555 8556 if (CNIC_SUPPORT(bp)) { 8557 /* SRC */ 8558 ilt_client = &ilt->clients[ILT_CLIENT_SRC]; 8559 ilt_client->client_num = ILT_CLIENT_SRC; 8560 ilt_client->page_size = SRC_ILT_PAGE_SZ; 8561 ilt_client->flags = 0; 8562 ilt_client->start = line; 8563 line += SRC_ILT_LINES; 8564 ilt_client->end = line - 1; 8565 8566 DP(NETIF_MSG_IFUP, 8567 "ilt client[SRC]: start %d, end %d, psz 0x%x, flags 0x%x, hw psz %d\n", 8568 ilt_client->start, 8569 ilt_client->end, 8570 ilt_client->page_size, 8571 ilt_client->flags, 8572 ilog2(ilt_client->page_size >> 12)); 8573 8574 /* TM */ 8575 ilt_client = &ilt->clients[ILT_CLIENT_TM]; 8576 ilt_client->client_num = ILT_CLIENT_TM; 8577 ilt_client->page_size = TM_ILT_PAGE_SZ; 8578 ilt_client->flags = 0; 8579 ilt_client->start = line; 8580 line += TM_ILT_LINES; 8581 ilt_client->end = line - 1; 8582 8583 DP(NETIF_MSG_IFUP, 8584 "ilt client[TM]: start %d, end %d, psz 0x%x, flags 0x%x, hw psz %d\n", 8585 ilt_client->start, 8586 ilt_client->end, 8587 ilt_client->page_size, 8588 ilt_client->flags, 8589 ilog2(ilt_client->page_size >> 12)); 8590 } 8591 8592 BUG_ON(line > ILT_MAX_LINES); 8593} 8594 8595/** 8596 * bnx2x_pf_q_prep_init - prepare INIT transition parameters 8597 * 8598 * @bp: driver handle 8599 * @fp: pointer to fastpath 8600 * @init_params: pointer to parameters structure 8601 * 8602 * parameters configured: 8603 * - HC configuration 8604 * - Queue's CDU context 8605 */ 8606static void bnx2x_pf_q_prep_init(struct bnx2x *bp, 8607 struct bnx2x_fastpath *fp, struct bnx2x_queue_init_params *init_params) 8608{ 8609 u8 cos; 8610 int cxt_index, cxt_offset; 8611 8612 /* FCoE Queue uses Default SB, thus has no HC capabilities */ 8613 if (!IS_FCOE_FP(fp)) { 8614 __set_bit(BNX2X_Q_FLG_HC, &init_params->rx.flags); 8615 __set_bit(BNX2X_Q_FLG_HC, &init_params->tx.flags); 8616 8617 /* If HC is supported, enable host coalescing in the transition 8618 * to INIT state. 8619 */ 8620 __set_bit(BNX2X_Q_FLG_HC_EN, &init_params->rx.flags); 8621 __set_bit(BNX2X_Q_FLG_HC_EN, &init_params->tx.flags); 8622 8623 /* HC rate */ 8624 init_params->rx.hc_rate = bp->rx_ticks ? 8625 (1000000 / bp->rx_ticks) : 0; 8626 init_params->tx.hc_rate = bp->tx_ticks ? 8627 (1000000 / bp->tx_ticks) : 0; 8628 8629 /* FW SB ID */ 8630 init_params->rx.fw_sb_id = init_params->tx.fw_sb_id = 8631 fp->fw_sb_id; 8632 8633 /* 8634 * CQ index among the SB indices: FCoE clients uses the default 8635 * SB, therefore it's different. 8636 */ 8637 init_params->rx.sb_cq_index = HC_INDEX_ETH_RX_CQ_CONS; 8638 init_params->tx.sb_cq_index = HC_INDEX_ETH_FIRST_TX_CQ_CONS; 8639 } 8640 8641 /* set maximum number of COSs supported by this queue */ 8642 init_params->max_cos = fp->max_cos; 8643 8644 DP(NETIF_MSG_IFUP, "fp: %d setting queue params max cos to: %d\n", 8645 fp->index, init_params->max_cos); 8646 8647 /* set the context pointers queue object */ 8648 for (cos = FIRST_TX_COS_INDEX; cos < init_params->max_cos; cos++) { 8649 cxt_index = fp->txdata_ptr[cos]->cid / ILT_PAGE_CIDS; 8650 cxt_offset = fp->txdata_ptr[cos]->cid - (cxt_index * 8651 ILT_PAGE_CIDS); 8652 init_params->cxts[cos] = 8653 &bp->context[cxt_index].vcxt[cxt_offset].eth; 8654 } 8655} 8656 8657static int bnx2x_setup_tx_only(struct bnx2x *bp, struct bnx2x_fastpath *fp, 8658 struct bnx2x_queue_state_params *q_params, 8659 struct bnx2x_queue_setup_tx_only_params *tx_only_params, 8660 int tx_index, bool leading) 8661{ 8662 memset(tx_only_params, 0, sizeof(*tx_only_params)); 8663 8664 /* Set the command */ 8665 q_params->cmd = BNX2X_Q_CMD_SETUP_TX_ONLY; 8666 8667 /* Set tx-only QUEUE flags: don't zero statistics */ 8668 tx_only_params->flags = bnx2x_get_common_flags(bp, fp, false); 8669 8670 /* choose the index of the cid to send the slow path on */ 8671 tx_only_params->cid_index = tx_index; 8672 8673 /* Set general TX_ONLY_SETUP parameters */ 8674 bnx2x_pf_q_prep_general(bp, fp, &tx_only_params->gen_params, tx_index); 8675 8676 /* Set Tx TX_ONLY_SETUP parameters */ 8677 bnx2x_pf_tx_q_prep(bp, fp, &tx_only_params->txq_params, tx_index); 8678 8679 DP(NETIF_MSG_IFUP, 8680 "preparing to send tx-only ramrod for connection: cos %d, primary cid %d, cid %d, client id %d, sp-client id %d, flags %lx\n", 8681 tx_index, q_params->q_obj->cids[FIRST_TX_COS_INDEX], 8682 q_params->q_obj->cids[tx_index], q_params->q_obj->cl_id, 8683 tx_only_params->gen_params.spcl_id, tx_only_params->flags); 8684 8685 /* send the ramrod */ 8686 return bnx2x_queue_state_change(bp, q_params); 8687} 8688 8689/** 8690 * bnx2x_setup_queue - setup queue 8691 * 8692 * @bp: driver handle 8693 * @fp: pointer to fastpath 8694 * @leading: is leading 8695 * 8696 * This function performs 2 steps in a Queue state machine 8697 * actually: 1) RESET->INIT 2) INIT->SETUP 8698 */ 8699 8700int bnx2x_setup_queue(struct bnx2x *bp, struct bnx2x_fastpath *fp, 8701 bool leading) 8702{ 8703 struct bnx2x_queue_state_params q_params = {NULL}; 8704 struct bnx2x_queue_setup_params *setup_params = 8705 &q_params.params.setup; 8706 struct bnx2x_queue_setup_tx_only_params *tx_only_params = 8707 &q_params.params.tx_only; 8708 int rc; 8709 u8 tx_index; 8710 8711 DP(NETIF_MSG_IFUP, "setting up queue %d\n", fp->index); 8712 8713 /* reset IGU state skip FCoE L2 queue */ 8714 if (!IS_FCOE_FP(fp)) 8715 bnx2x_ack_sb(bp, fp->igu_sb_id, USTORM_ID, 0, 8716 IGU_INT_ENABLE, 0); 8717 8718 q_params.q_obj = &bnx2x_sp_obj(bp, fp).q_obj; 8719 /* We want to wait for completion in this context */ 8720 __set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags); 8721 8722 /* Prepare the INIT parameters */ 8723 bnx2x_pf_q_prep_init(bp, fp, &q_params.params.init); 8724 8725 /* Set the command */ 8726 q_params.cmd = BNX2X_Q_CMD_INIT; 8727 8728 /* Change the state to INIT */ 8729 rc = bnx2x_queue_state_change(bp, &q_params); 8730 if (rc) { 8731 BNX2X_ERR("Queue(%d) INIT failed\n", fp->index); 8732 return rc; 8733 } 8734 8735 DP(NETIF_MSG_IFUP, "init complete\n"); 8736 8737 /* Now move the Queue to the SETUP state... */ 8738 memset(setup_params, 0, sizeof(*setup_params)); 8739 8740 /* Set QUEUE flags */ 8741 setup_params->flags = bnx2x_get_q_flags(bp, fp, leading); 8742 8743 /* Set general SETUP parameters */ 8744 bnx2x_pf_q_prep_general(bp, fp, &setup_params->gen_params, 8745 FIRST_TX_COS_INDEX); 8746 8747 bnx2x_pf_rx_q_prep(bp, fp, &setup_params->pause_params, 8748 &setup_params->rxq_params); 8749 8750 bnx2x_pf_tx_q_prep(bp, fp, &setup_params->txq_params, 8751 FIRST_TX_COS_INDEX); 8752 8753 /* Set the command */ 8754 q_params.cmd = BNX2X_Q_CMD_SETUP; 8755 8756 if (IS_FCOE_FP(fp)) 8757 bp->fcoe_init = true; 8758 8759 /* Change the state to SETUP */ 8760 rc = bnx2x_queue_state_change(bp, &q_params); 8761 if (rc) { 8762 BNX2X_ERR("Queue(%d) SETUP failed\n", fp->index); 8763 return rc; 8764 } 8765 8766 /* loop through the relevant tx-only indices */ 8767 for (tx_index = FIRST_TX_ONLY_COS_INDEX; 8768 tx_index < fp->max_cos; 8769 tx_index++) { 8770 8771 /* prepare and send tx-only ramrod*/ 8772 rc = bnx2x_setup_tx_only(bp, fp, &q_params, 8773 tx_only_params, tx_index, leading); 8774 if (rc) { 8775 BNX2X_ERR("Queue(%d.%d) TX_ONLY_SETUP failed\n", 8776 fp->index, tx_index); 8777 return rc; 8778 } 8779 } 8780 8781 return rc; 8782} 8783 8784static int bnx2x_stop_queue(struct bnx2x *bp, int index) 8785{ 8786 struct bnx2x_fastpath *fp = &bp->fp[index]; 8787 struct bnx2x_fp_txdata *txdata; 8788 struct bnx2x_queue_state_params q_params = {NULL}; 8789 int rc, tx_index; 8790 8791 DP(NETIF_MSG_IFDOWN, "stopping queue %d cid %d\n", index, fp->cid); 8792 8793 q_params.q_obj = &bnx2x_sp_obj(bp, fp).q_obj; 8794 /* We want to wait for completion in this context */ 8795 __set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags); 8796 8797 /* close tx-only connections */ 8798 for (tx_index = FIRST_TX_ONLY_COS_INDEX; 8799 tx_index < fp->max_cos; 8800 tx_index++){ 8801 8802 /* ascertain this is a normal queue*/ 8803 txdata = fp->txdata_ptr[tx_index]; 8804 8805 DP(NETIF_MSG_IFDOWN, "stopping tx-only queue %d\n", 8806 txdata->txq_index); 8807 8808 /* send halt terminate on tx-only connection */ 8809 q_params.cmd = BNX2X_Q_CMD_TERMINATE; 8810 memset(&q_params.params.terminate, 0, 8811 sizeof(q_params.params.terminate)); 8812 q_params.params.terminate.cid_index = tx_index; 8813 8814 rc = bnx2x_queue_state_change(bp, &q_params); 8815 if (rc) 8816 return rc; 8817 8818 /* send halt terminate on tx-only connection */ 8819 q_params.cmd = BNX2X_Q_CMD_CFC_DEL; 8820 memset(&q_params.params.cfc_del, 0, 8821 sizeof(q_params.params.cfc_del)); 8822 q_params.params.cfc_del.cid_index = tx_index; 8823 rc = bnx2x_queue_state_change(bp, &q_params); 8824 if (rc) 8825 return rc; 8826 } 8827 /* Stop the primary connection: */ 8828 /* ...halt the connection */ 8829 q_params.cmd = BNX2X_Q_CMD_HALT; 8830 rc = bnx2x_queue_state_change(bp, &q_params); 8831 if (rc) 8832 return rc; 8833 8834 /* ...terminate the connection */ 8835 q_params.cmd = BNX2X_Q_CMD_TERMINATE; 8836 memset(&q_params.params.terminate, 0, 8837 sizeof(q_params.params.terminate)); 8838 q_params.params.terminate.cid_index = FIRST_TX_COS_INDEX; 8839 rc = bnx2x_queue_state_change(bp, &q_params); 8840 if (rc) 8841 return rc; 8842 /* ...delete cfc entry */ 8843 q_params.cmd = BNX2X_Q_CMD_CFC_DEL; 8844 memset(&q_params.params.cfc_del, 0, 8845 sizeof(q_params.params.cfc_del)); 8846 q_params.params.cfc_del.cid_index = FIRST_TX_COS_INDEX; 8847 return bnx2x_queue_state_change(bp, &q_params); 8848} 8849 8850static void bnx2x_reset_func(struct bnx2x *bp) 8851{ 8852 int port = BP_PORT(bp); 8853 int func = BP_FUNC(bp); 8854 int i; 8855 8856 /* Disable the function in the FW */ 8857 REG_WR8(bp, BAR_XSTRORM_INTMEM + XSTORM_FUNC_EN_OFFSET(func), 0); 8858 REG_WR8(bp, BAR_CSTRORM_INTMEM + CSTORM_FUNC_EN_OFFSET(func), 0); 8859 REG_WR8(bp, BAR_TSTRORM_INTMEM + TSTORM_FUNC_EN_OFFSET(func), 0); 8860 REG_WR8(bp, BAR_USTRORM_INTMEM + USTORM_FUNC_EN_OFFSET(func), 0); 8861 8862 /* FP SBs */ 8863 for_each_eth_queue(bp, i) { 8864 struct bnx2x_fastpath *fp = &bp->fp[i]; 8865 REG_WR8(bp, BAR_CSTRORM_INTMEM + 8866 CSTORM_STATUS_BLOCK_DATA_STATE_OFFSET(fp->fw_sb_id), 8867 SB_DISABLED); 8868 } 8869 8870 if (CNIC_LOADED(bp)) 8871 /* CNIC SB */ 8872 REG_WR8(bp, BAR_CSTRORM_INTMEM + 8873 CSTORM_STATUS_BLOCK_DATA_STATE_OFFSET 8874 (bnx2x_cnic_fw_sb_id(bp)), SB_DISABLED); 8875 8876 /* SP SB */ 8877 REG_WR8(bp, BAR_CSTRORM_INTMEM + 8878 CSTORM_SP_STATUS_BLOCK_DATA_STATE_OFFSET(func), 8879 SB_DISABLED); 8880 8881 for (i = 0; i < XSTORM_SPQ_DATA_SIZE / 4; i++) 8882 REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_SPQ_DATA_OFFSET(func), 8883 0); 8884 8885 /* Configure IGU */ 8886 if (bp->common.int_block == INT_BLOCK_HC) { 8887 REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, 0); 8888 REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, 0); 8889 } else { 8890 REG_WR(bp, IGU_REG_LEADING_EDGE_LATCH, 0); 8891 REG_WR(bp, IGU_REG_TRAILING_EDGE_LATCH, 0); 8892 } 8893 8894 if (CNIC_LOADED(bp)) { 8895 /* Disable Timer scan */ 8896 REG_WR(bp, TM_REG_EN_LINEAR0_TIMER + port*4, 0); 8897 /* 8898 * Wait for at least 10ms and up to 2 second for the timers 8899 * scan to complete 8900 */ 8901 for (i = 0; i < 200; i++) { 8902 usleep_range(10000, 20000); 8903 if (!REG_RD(bp, TM_REG_LIN0_SCAN_ON + port*4)) 8904 break; 8905 } 8906 } 8907 /* Clear ILT */ 8908 bnx2x_clear_func_ilt(bp, func); 8909 8910 /* Timers workaround bug for E2: if this is vnic-3, 8911 * we need to set the entire ilt range for this timers. 8912 */ 8913 if (!CHIP_IS_E1x(bp) && BP_VN(bp) == 3) { 8914 struct ilt_client_info ilt_cli; 8915 /* use dummy TM client */ 8916 memset(&ilt_cli, 0, sizeof(struct ilt_client_info)); 8917 ilt_cli.start = 0; 8918 ilt_cli.end = ILT_NUM_PAGE_ENTRIES - 1; 8919 ilt_cli.client_num = ILT_CLIENT_TM; 8920 8921 bnx2x_ilt_boundry_init_op(bp, &ilt_cli, 0, INITOP_CLEAR); 8922 } 8923 8924 /* this assumes that reset_port() called before reset_func()*/ 8925 if (!CHIP_IS_E1x(bp)) 8926 bnx2x_pf_disable(bp); 8927 8928 bp->dmae_ready = 0; 8929} 8930 8931static void bnx2x_reset_port(struct bnx2x *bp) 8932{ 8933 int port = BP_PORT(bp); 8934 u32 val; 8935 8936 /* Reset physical Link */ 8937 bnx2x__link_reset(bp); 8938 8939 REG_WR(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, 0); 8940 8941 /* Do not rcv packets to BRB */ 8942 REG_WR(bp, NIG_REG_LLH0_BRB1_DRV_MASK + port*4, 0x0); 8943 /* Do not direct rcv packets that are not for MCP to the BRB */ 8944 REG_WR(bp, (port ? NIG_REG_LLH1_BRB1_NOT_MCP : 8945 NIG_REG_LLH0_BRB1_NOT_MCP), 0x0); 8946 8947 /* Configure AEU */ 8948 REG_WR(bp, MISC_REG_AEU_MASK_ATTN_FUNC_0 + port*4, 0); 8949 8950 msleep(100); 8951 /* Check for BRB port occupancy */ 8952 val = REG_RD(bp, BRB1_REG_PORT_NUM_OCC_BLOCKS_0 + port*4); 8953 if (val) 8954 DP(NETIF_MSG_IFDOWN, 8955 "BRB1 is not empty %d blocks are occupied\n", val); 8956 8957 /* TODO: Close Doorbell port? */ 8958} 8959 8960static int bnx2x_reset_hw(struct bnx2x *bp, u32 load_code) 8961{ 8962 struct bnx2x_func_state_params func_params = {NULL}; 8963 8964 /* Prepare parameters for function state transitions */ 8965 __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags); 8966 8967 func_params.f_obj = &bp->func_obj; 8968 func_params.cmd = BNX2X_F_CMD_HW_RESET; 8969 8970 func_params.params.hw_init.load_phase = load_code; 8971 8972 return bnx2x_func_state_change(bp, &func_params); 8973} 8974 8975static int bnx2x_func_stop(struct bnx2x *bp) 8976{ 8977 struct bnx2x_func_state_params func_params = {NULL}; 8978 int rc; 8979 8980 /* Prepare parameters for function state transitions */ 8981 __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags); 8982 func_params.f_obj = &bp->func_obj; 8983 func_params.cmd = BNX2X_F_CMD_STOP; 8984 8985 /* 8986 * Try to stop the function the 'good way'. If fails (in case 8987 * of a parity error during bnx2x_chip_cleanup()) and we are 8988 * not in a debug mode, perform a state transaction in order to 8989 * enable further HW_RESET transaction. 8990 */ 8991 rc = bnx2x_func_state_change(bp, &func_params); 8992 if (rc) { 8993#ifdef BNX2X_STOP_ON_ERROR 8994 return rc; 8995#else 8996 BNX2X_ERR("FUNC_STOP ramrod failed. Running a dry transaction\n"); 8997 __set_bit(RAMROD_DRV_CLR_ONLY, &func_params.ramrod_flags); 8998 return bnx2x_func_state_change(bp, &func_params); 8999#endif 9000 } 9001 9002 return 0; 9003} 9004 9005/** 9006 * bnx2x_send_unload_req - request unload mode from the MCP. 9007 * 9008 * @bp: driver handle 9009 * @unload_mode: requested function's unload mode 9010 * 9011 * Return unload mode returned by the MCP: COMMON, PORT or FUNC. 9012 */ 9013u32 bnx2x_send_unload_req(struct bnx2x *bp, int unload_mode) 9014{ 9015 u32 reset_code = 0; 9016 int port = BP_PORT(bp); 9017 9018 /* Select the UNLOAD request mode */ 9019 if (unload_mode == UNLOAD_NORMAL) 9020 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS; 9021 9022 else if (bp->flags & NO_WOL_FLAG) 9023 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP; 9024 9025 else if (bp->wol) { 9026 u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0; 9027 u8 *mac_addr = bp->dev->dev_addr; 9028 struct pci_dev *pdev = bp->pdev; 9029 u32 val; 9030 u16 pmc; 9031 9032 /* The mac address is written to entries 1-4 to 9033 * preserve entry 0 which is used by the PMF 9034 */ 9035 u8 entry = (BP_VN(bp) + 1)*8; 9036 9037 val = (mac_addr[0] << 8) | mac_addr[1]; 9038 EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + entry, val); 9039 9040 val = (mac_addr[2] << 24) | (mac_addr[3] << 16) | 9041 (mac_addr[4] << 8) | mac_addr[5]; 9042 EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + entry + 4, val); 9043 9044 /* Enable the PME and clear the status */ 9045 pci_read_config_word(pdev, pdev->pm_cap + PCI_PM_CTRL, &pmc); 9046 pmc |= PCI_PM_CTRL_PME_ENABLE | PCI_PM_CTRL_PME_STATUS; 9047 pci_write_config_word(pdev, pdev->pm_cap + PCI_PM_CTRL, pmc); 9048 9049 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_EN; 9050 9051 } else 9052 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS; 9053 9054 /* Send the request to the MCP */ 9055 if (!BP_NOMCP(bp)) 9056 reset_code = bnx2x_fw_command(bp, reset_code, 0); 9057 else { 9058 int path = BP_PATH(bp); 9059 9060 DP(NETIF_MSG_IFDOWN, "NO MCP - load counts[%d] %d, %d, %d\n", 9061 path, bnx2x_load_count[path][0], bnx2x_load_count[path][1], 9062 bnx2x_load_count[path][2]); 9063 bnx2x_load_count[path][0]--; 9064 bnx2x_load_count[path][1 + port]--; 9065 DP(NETIF_MSG_IFDOWN, "NO MCP - new load counts[%d] %d, %d, %d\n", 9066 path, bnx2x_load_count[path][0], bnx2x_load_count[path][1], 9067 bnx2x_load_count[path][2]); 9068 if (bnx2x_load_count[path][0] == 0) 9069 reset_code = FW_MSG_CODE_DRV_UNLOAD_COMMON; 9070 else if (bnx2x_load_count[path][1 + port] == 0) 9071 reset_code = FW_MSG_CODE_DRV_UNLOAD_PORT; 9072 else 9073 reset_code = FW_MSG_CODE_DRV_UNLOAD_FUNCTION; 9074 } 9075 9076 return reset_code; 9077} 9078 9079/** 9080 * bnx2x_send_unload_done - send UNLOAD_DONE command to the MCP. 9081 * 9082 * @bp: driver handle 9083 * @keep_link: true iff link should be kept up 9084 */ 9085void bnx2x_send_unload_done(struct bnx2x *bp, bool keep_link) 9086{ 9087 u32 reset_param = keep_link ? DRV_MSG_CODE_UNLOAD_SKIP_LINK_RESET : 0; 9088 9089 /* Report UNLOAD_DONE to MCP */ 9090 if (!BP_NOMCP(bp)) 9091 bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE, reset_param); 9092} 9093 9094static int bnx2x_func_wait_started(struct bnx2x *bp) 9095{ 9096 int tout = 50; 9097 int msix = (bp->flags & USING_MSIX_FLAG) ? 1 : 0; 9098 9099 if (!bp->port.pmf) 9100 return 0; 9101 9102 /* 9103 * (assumption: No Attention from MCP at this stage) 9104 * PMF probably in the middle of TX disable/enable transaction 9105 * 1. Sync IRS for default SB 9106 * 2. Sync SP queue - this guarantees us that attention handling started 9107 * 3. Wait, that TX disable/enable transaction completes 9108 * 9109 * 1+2 guarantee that if DCBx attention was scheduled it already changed 9110 * pending bit of transaction from STARTED-->TX_STOPPED, if we already 9111 * received completion for the transaction the state is TX_STOPPED. 9112 * State will return to STARTED after completion of TX_STOPPED-->STARTED 9113 * transaction. 9114 */ 9115 9116 /* make sure default SB ISR is done */ 9117 if (msix) 9118 synchronize_irq(bp->msix_table[0].vector); 9119 else 9120 synchronize_irq(bp->pdev->irq); 9121 9122 flush_workqueue(bnx2x_wq); 9123 flush_workqueue(bnx2x_iov_wq); 9124 9125 while (bnx2x_func_get_state(bp, &bp->func_obj) != 9126 BNX2X_F_STATE_STARTED && tout--) 9127 msleep(20); 9128 9129 if (bnx2x_func_get_state(bp, &bp->func_obj) != 9130 BNX2X_F_STATE_STARTED) { 9131#ifdef BNX2X_STOP_ON_ERROR 9132 BNX2X_ERR("Wrong function state\n"); 9133 return -EBUSY; 9134#else 9135 /* 9136 * Failed to complete the transaction in a "good way" 9137 * Force both transactions with CLR bit 9138 */ 9139 struct bnx2x_func_state_params func_params = {NULL}; 9140 9141 DP(NETIF_MSG_IFDOWN, 9142 "Hmmm... Unexpected function state! Forcing STARTED-->TX_STOPPED-->STARTED\n"); 9143 9144 func_params.f_obj = &bp->func_obj; 9145 __set_bit(RAMROD_DRV_CLR_ONLY, 9146 &func_params.ramrod_flags); 9147 9148 /* STARTED-->TX_ST0PPED */ 9149 func_params.cmd = BNX2X_F_CMD_TX_STOP; 9150 bnx2x_func_state_change(bp, &func_params); 9151 9152 /* TX_ST0PPED-->STARTED */ 9153 func_params.cmd = BNX2X_F_CMD_TX_START; 9154 return bnx2x_func_state_change(bp, &func_params); 9155#endif 9156 } 9157 9158 return 0; 9159} 9160 9161static void bnx2x_disable_ptp(struct bnx2x *bp) 9162{ 9163 int port = BP_PORT(bp); 9164 9165 /* Disable sending PTP packets to host */ 9166 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_TO_HOST : 9167 NIG_REG_P0_LLH_PTP_TO_HOST, 0x0); 9168 9169 /* Reset PTP event detection rules */ 9170 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_PARAM_MASK : 9171 NIG_REG_P0_LLH_PTP_PARAM_MASK, 0x7FF); 9172 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_RULE_MASK : 9173 NIG_REG_P0_LLH_PTP_RULE_MASK, 0x3FFF); 9174 REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_PARAM_MASK : 9175 NIG_REG_P0_TLLH_PTP_PARAM_MASK, 0x7FF); 9176 REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_RULE_MASK : 9177 NIG_REG_P0_TLLH_PTP_RULE_MASK, 0x3FFF); 9178 9179 /* Disable the PTP feature */ 9180 REG_WR(bp, port ? NIG_REG_P1_PTP_EN : 9181 NIG_REG_P0_PTP_EN, 0x0); 9182} 9183 9184/* Called during unload, to stop PTP-related stuff */ 9185static void bnx2x_stop_ptp(struct bnx2x *bp) 9186{ 9187 /* Cancel PTP work queue. Should be done after the Tx queues are 9188 * drained to prevent additional scheduling. 9189 */ 9190 cancel_work_sync(&bp->ptp_task); 9191 9192 if (bp->ptp_tx_skb) { 9193 dev_kfree_skb_any(bp->ptp_tx_skb); 9194 bp->ptp_tx_skb = NULL; 9195 } 9196 9197 /* Disable PTP in HW */ 9198 bnx2x_disable_ptp(bp); 9199 9200 DP(BNX2X_MSG_PTP, "PTP stop ended successfully\n"); 9201} 9202 9203void bnx2x_chip_cleanup(struct bnx2x *bp, int unload_mode, bool keep_link) 9204{ 9205 int port = BP_PORT(bp); 9206 int i, rc = 0; 9207 u8 cos; 9208 struct bnx2x_mcast_ramrod_params rparam = {NULL}; 9209 u32 reset_code; 9210 9211 /* Wait until tx fastpath tasks complete */ 9212 for_each_tx_queue(bp, i) { 9213 struct bnx2x_fastpath *fp = &bp->fp[i]; 9214 9215 for_each_cos_in_tx_queue(fp, cos) 9216 rc = bnx2x_clean_tx_queue(bp, fp->txdata_ptr[cos]); 9217#ifdef BNX2X_STOP_ON_ERROR 9218 if (rc) 9219 return; 9220#endif 9221 } 9222 9223 /* Give HW time to discard old tx messages */ 9224 usleep_range(1000, 2000); 9225 9226 /* Clean all ETH MACs */ 9227 rc = bnx2x_del_all_macs(bp, &bp->sp_objs[0].mac_obj, BNX2X_ETH_MAC, 9228 false); 9229 if (rc < 0) 9230 BNX2X_ERR("Failed to delete all ETH macs: %d\n", rc); 9231 9232 /* Clean up UC list */ 9233 rc = bnx2x_del_all_macs(bp, &bp->sp_objs[0].mac_obj, BNX2X_UC_LIST_MAC, 9234 true); 9235 if (rc < 0) 9236 BNX2X_ERR("Failed to schedule DEL commands for UC MACs list: %d\n", 9237 rc); 9238 9239 /* Disable LLH */ 9240 if (!CHIP_IS_E1(bp)) 9241 REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 0); 9242 9243 /* Set "drop all" (stop Rx). 9244 * We need to take a netif_addr_lock() here in order to prevent 9245 * a race between the completion code and this code. 9246 */ 9247 netif_addr_lock_bh(bp->dev); 9248 /* Schedule the rx_mode command */ 9249 if (test_bit(BNX2X_FILTER_RX_MODE_PENDING, &bp->sp_state)) 9250 set_bit(BNX2X_FILTER_RX_MODE_SCHED, &bp->sp_state); 9251 else 9252 bnx2x_set_storm_rx_mode(bp); 9253 9254 /* Cleanup multicast configuration */ 9255 rparam.mcast_obj = &bp->mcast_obj; 9256 rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_DEL); 9257 if (rc < 0) 9258 BNX2X_ERR("Failed to send DEL multicast command: %d\n", rc); 9259 9260 netif_addr_unlock_bh(bp->dev); 9261 9262 bnx2x_iov_chip_cleanup(bp); 9263 9264 /* 9265 * Send the UNLOAD_REQUEST to the MCP. This will return if 9266 * this function should perform FUNC, PORT or COMMON HW 9267 * reset. 9268 */ 9269 reset_code = bnx2x_send_unload_req(bp, unload_mode); 9270 9271 /* 9272 * (assumption: No Attention from MCP at this stage) 9273 * PMF probably in the middle of TX disable/enable transaction 9274 */ 9275 rc = bnx2x_func_wait_started(bp); 9276 if (rc) { 9277 BNX2X_ERR("bnx2x_func_wait_started failed\n"); 9278#ifdef BNX2X_STOP_ON_ERROR 9279 return; 9280#endif 9281 } 9282 9283 /* Close multi and leading connections 9284 * Completions for ramrods are collected in a synchronous way 9285 */ 9286 for_each_eth_queue(bp, i) 9287 if (bnx2x_stop_queue(bp, i)) 9288#ifdef BNX2X_STOP_ON_ERROR 9289 return; 9290#else 9291 goto unload_error; 9292#endif 9293 9294 if (CNIC_LOADED(bp)) { 9295 for_each_cnic_queue(bp, i) 9296 if (bnx2x_stop_queue(bp, i)) 9297#ifdef BNX2X_STOP_ON_ERROR 9298 return; 9299#else 9300 goto unload_error; 9301#endif 9302 } 9303 9304 /* If SP settings didn't get completed so far - something 9305 * very wrong has happen. 9306 */ 9307 if (!bnx2x_wait_sp_comp(bp, ~0x0UL)) 9308 BNX2X_ERR("Hmmm... Common slow path ramrods got stuck!\n"); 9309 9310#ifndef BNX2X_STOP_ON_ERROR 9311unload_error: 9312#endif 9313 rc = bnx2x_func_stop(bp); 9314 if (rc) { 9315 BNX2X_ERR("Function stop failed!\n"); 9316#ifdef BNX2X_STOP_ON_ERROR 9317 return; 9318#endif 9319 } 9320 9321 /* stop_ptp should be after the Tx queues are drained to prevent 9322 * scheduling to the cancelled PTP work queue. It should also be after 9323 * function stop ramrod is sent, since as part of this ramrod FW access 9324 * PTP registers. 9325 */ 9326 if (bp->flags & PTP_SUPPORTED) 9327 bnx2x_stop_ptp(bp); 9328 9329 /* Disable HW interrupts, NAPI */ 9330 bnx2x_netif_stop(bp, 1); 9331 /* Delete all NAPI objects */ 9332 bnx2x_del_all_napi(bp); 9333 if (CNIC_LOADED(bp)) 9334 bnx2x_del_all_napi_cnic(bp); 9335 9336 /* Release IRQs */ 9337 bnx2x_free_irq(bp); 9338 9339 /* Reset the chip */ 9340 rc = bnx2x_reset_hw(bp, reset_code); 9341 if (rc) 9342 BNX2X_ERR("HW_RESET failed\n"); 9343 9344 /* Report UNLOAD_DONE to MCP */ 9345 bnx2x_send_unload_done(bp, keep_link); 9346} 9347 9348void bnx2x_disable_close_the_gate(struct bnx2x *bp) 9349{ 9350 u32 val; 9351 9352 DP(NETIF_MSG_IFDOWN, "Disabling \"close the gates\"\n"); 9353 9354 if (CHIP_IS_E1(bp)) { 9355 int port = BP_PORT(bp); 9356 u32 addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 : 9357 MISC_REG_AEU_MASK_ATTN_FUNC_0; 9358 9359 val = REG_RD(bp, addr); 9360 val &= ~(0x300); 9361 REG_WR(bp, addr, val); 9362 } else { 9363 val = REG_RD(bp, MISC_REG_AEU_GENERAL_MASK); 9364 val &= ~(MISC_AEU_GENERAL_MASK_REG_AEU_PXP_CLOSE_MASK | 9365 MISC_AEU_GENERAL_MASK_REG_AEU_NIG_CLOSE_MASK); 9366 REG_WR(bp, MISC_REG_AEU_GENERAL_MASK, val); 9367 } 9368} 9369 9370/* Close gates #2, #3 and #4: */ 9371static void bnx2x_set_234_gates(struct bnx2x *bp, bool close) 9372{ 9373 u32 val; 9374 9375 /* Gates #2 and #4a are closed/opened for "not E1" only */ 9376 if (!CHIP_IS_E1(bp)) { 9377 /* #4 */ 9378 REG_WR(bp, PXP_REG_HST_DISCARD_DOORBELLS, !!close); 9379 /* #2 */ 9380 REG_WR(bp, PXP_REG_HST_DISCARD_INTERNAL_WRITES, !!close); 9381 } 9382 9383 /* #3 */ 9384 if (CHIP_IS_E1x(bp)) { 9385 /* Prevent interrupts from HC on both ports */ 9386 val = REG_RD(bp, HC_REG_CONFIG_1); 9387 REG_WR(bp, HC_REG_CONFIG_1, 9388 (!close) ? (val | HC_CONFIG_1_REG_BLOCK_DISABLE_1) : 9389 (val & ~(u32)HC_CONFIG_1_REG_BLOCK_DISABLE_1)); 9390 9391 val = REG_RD(bp, HC_REG_CONFIG_0); 9392 REG_WR(bp, HC_REG_CONFIG_0, 9393 (!close) ? (val | HC_CONFIG_0_REG_BLOCK_DISABLE_0) : 9394 (val & ~(u32)HC_CONFIG_0_REG_BLOCK_DISABLE_0)); 9395 } else { 9396 /* Prevent incoming interrupts in IGU */ 9397 val = REG_RD(bp, IGU_REG_BLOCK_CONFIGURATION); 9398 9399 REG_WR(bp, IGU_REG_BLOCK_CONFIGURATION, 9400 (!close) ? 9401 (val | IGU_BLOCK_CONFIGURATION_REG_BLOCK_ENABLE) : 9402 (val & ~(u32)IGU_BLOCK_CONFIGURATION_REG_BLOCK_ENABLE)); 9403 } 9404 9405 DP(NETIF_MSG_HW | NETIF_MSG_IFUP, "%s gates #2, #3 and #4\n", 9406 close ? "closing" : "opening"); 9407 mmiowb(); 9408} 9409 9410#define SHARED_MF_CLP_MAGIC 0x80000000 /* `magic' bit */ 9411 9412static void bnx2x_clp_reset_prep(struct bnx2x *bp, u32 *magic_val) 9413{ 9414 /* Do some magic... */ 9415 u32 val = MF_CFG_RD(bp, shared_mf_config.clp_mb); 9416 *magic_val = val & SHARED_MF_CLP_MAGIC; 9417 MF_CFG_WR(bp, shared_mf_config.clp_mb, val | SHARED_MF_CLP_MAGIC); 9418} 9419 9420/** 9421 * bnx2x_clp_reset_done - restore the value of the `magic' bit. 9422 * 9423 * @bp: driver handle 9424 * @magic_val: old value of the `magic' bit. 9425 */ 9426static void bnx2x_clp_reset_done(struct bnx2x *bp, u32 magic_val) 9427{ 9428 /* Restore the `magic' bit value... */ 9429 u32 val = MF_CFG_RD(bp, shared_mf_config.clp_mb); 9430 MF_CFG_WR(bp, shared_mf_config.clp_mb, 9431 (val & (~SHARED_MF_CLP_MAGIC)) | magic_val); 9432} 9433 9434/** 9435 * bnx2x_reset_mcp_prep - prepare for MCP reset. 9436 * 9437 * @bp: driver handle 9438 * @magic_val: old value of 'magic' bit. 9439 * 9440 * Takes care of CLP configurations. 9441 */ 9442static void bnx2x_reset_mcp_prep(struct bnx2x *bp, u32 *magic_val) 9443{ 9444 u32 shmem; 9445 u32 validity_offset; 9446 9447 DP(NETIF_MSG_HW | NETIF_MSG_IFUP, "Starting\n"); 9448 9449 /* Set `magic' bit in order to save MF config */ 9450 if (!CHIP_IS_E1(bp)) 9451 bnx2x_clp_reset_prep(bp, magic_val); 9452 9453 /* Get shmem offset */ 9454 shmem = REG_RD(bp, MISC_REG_SHARED_MEM_ADDR); 9455 validity_offset = 9456 offsetof(struct shmem_region, validity_map[BP_PORT(bp)]); 9457 9458 /* Clear validity map flags */ 9459 if (shmem > 0) 9460 REG_WR(bp, shmem + validity_offset, 0); 9461} 9462 9463#define MCP_TIMEOUT 5000 /* 5 seconds (in ms) */ 9464#define MCP_ONE_TIMEOUT 100 /* 100 ms */ 9465 9466/** 9467 * bnx2x_mcp_wait_one - wait for MCP_ONE_TIMEOUT 9468 * 9469 * @bp: driver handle 9470 */ 9471static void bnx2x_mcp_wait_one(struct bnx2x *bp) 9472{ 9473 /* special handling for emulation and FPGA, 9474 wait 10 times longer */ 9475 if (CHIP_REV_IS_SLOW(bp)) 9476 msleep(MCP_ONE_TIMEOUT*10); 9477 else 9478 msleep(MCP_ONE_TIMEOUT); 9479} 9480 9481/* 9482 * initializes bp->common.shmem_base and waits for validity signature to appear 9483 */ 9484static int bnx2x_init_shmem(struct bnx2x *bp) 9485{ 9486 int cnt = 0; 9487 u32 val = 0; 9488 9489 do { 9490 bp->common.shmem_base = REG_RD(bp, MISC_REG_SHARED_MEM_ADDR); 9491 if (bp->common.shmem_base) { 9492 val = SHMEM_RD(bp, validity_map[BP_PORT(bp)]); 9493 if (val & SHR_MEM_VALIDITY_MB) 9494 return 0; 9495 } 9496 9497 bnx2x_mcp_wait_one(bp); 9498 9499 } while (cnt++ < (MCP_TIMEOUT / MCP_ONE_TIMEOUT)); 9500 9501 BNX2X_ERR("BAD MCP validity signature\n"); 9502 9503 return -ENODEV; 9504} 9505 9506static int bnx2x_reset_mcp_comp(struct bnx2x *bp, u32 magic_val) 9507{ 9508 int rc = bnx2x_init_shmem(bp); 9509 9510 /* Restore the `magic' bit value */ 9511 if (!CHIP_IS_E1(bp)) 9512 bnx2x_clp_reset_done(bp, magic_val); 9513 9514 return rc; 9515} 9516 9517static void bnx2x_pxp_prep(struct bnx2x *bp) 9518{ 9519 if (!CHIP_IS_E1(bp)) { 9520 REG_WR(bp, PXP2_REG_RD_START_INIT, 0); 9521 REG_WR(bp, PXP2_REG_RQ_RBC_DONE, 0); 9522 mmiowb(); 9523 } 9524} 9525 9526/* 9527 * Reset the whole chip except for: 9528 * - PCIE core 9529 * - PCI Glue, PSWHST, PXP/PXP2 RF (all controlled by 9530 * one reset bit) 9531 * - IGU 9532 * - MISC (including AEU) 9533 * - GRC 9534 * - RBCN, RBCP 9535 */ 9536static void bnx2x_process_kill_chip_reset(struct bnx2x *bp, bool global) 9537{ 9538 u32 not_reset_mask1, reset_mask1, not_reset_mask2, reset_mask2; 9539 u32 global_bits2, stay_reset2; 9540 9541 /* 9542 * Bits that have to be set in reset_mask2 if we want to reset 'global' 9543 * (per chip) blocks. 9544 */ 9545 global_bits2 = 9546 MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CPU | 9547 MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CORE; 9548 9549 /* Don't reset the following blocks. 9550 * Important: per port blocks (such as EMAC, BMAC, UMAC) can't be 9551 * reset, as in 4 port device they might still be owned 9552 * by the MCP (there is only one leader per path). 9553 */ 9554 not_reset_mask1 = 9555 MISC_REGISTERS_RESET_REG_1_RST_HC | 9556 MISC_REGISTERS_RESET_REG_1_RST_PXPV | 9557 MISC_REGISTERS_RESET_REG_1_RST_PXP; 9558 9559 not_reset_mask2 = 9560 MISC_REGISTERS_RESET_REG_2_RST_PCI_MDIO | 9561 MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE | 9562 MISC_REGISTERS_RESET_REG_2_RST_EMAC1_HARD_CORE | 9563 MISC_REGISTERS_RESET_REG_2_RST_MISC_CORE | 9564 MISC_REGISTERS_RESET_REG_2_RST_RBCN | 9565 MISC_REGISTERS_RESET_REG_2_RST_GRC | 9566 MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_REG_HARD_CORE | 9567 MISC_REGISTERS_RESET_REG_2_RST_MCP_N_HARD_CORE_RST_B | 9568 MISC_REGISTERS_RESET_REG_2_RST_ATC | 9569 MISC_REGISTERS_RESET_REG_2_PGLC | 9570 MISC_REGISTERS_RESET_REG_2_RST_BMAC0 | 9571 MISC_REGISTERS_RESET_REG_2_RST_BMAC1 | 9572 MISC_REGISTERS_RESET_REG_2_RST_EMAC0 | 9573 MISC_REGISTERS_RESET_REG_2_RST_EMAC1 | 9574 MISC_REGISTERS_RESET_REG_2_UMAC0 | 9575 MISC_REGISTERS_RESET_REG_2_UMAC1; 9576 9577 /* 9578 * Keep the following blocks in reset: 9579 * - all xxMACs are handled by the bnx2x_link code. 9580 */ 9581 stay_reset2 = 9582 MISC_REGISTERS_RESET_REG_2_XMAC | 9583 MISC_REGISTERS_RESET_REG_2_XMAC_SOFT; 9584 9585 /* Full reset masks according to the chip */ 9586 reset_mask1 = 0xffffffff; 9587 9588 if (CHIP_IS_E1(bp)) 9589 reset_mask2 = 0xffff; 9590 else if (CHIP_IS_E1H(bp)) 9591 reset_mask2 = 0x1ffff; 9592 else if (CHIP_IS_E2(bp)) 9593 reset_mask2 = 0xfffff; 9594 else /* CHIP_IS_E3 */ 9595 reset_mask2 = 0x3ffffff; 9596 9597 /* Don't reset global blocks unless we need to */ 9598 if (!global) 9599 reset_mask2 &= ~global_bits2; 9600 9601 /* 9602 * In case of attention in the QM, we need to reset PXP 9603 * (MISC_REGISTERS_RESET_REG_2_RST_PXP_RQ_RD_WR) before QM 9604 * because otherwise QM reset would release 'close the gates' shortly 9605 * before resetting the PXP, then the PSWRQ would send a write 9606 * request to PGLUE. Then when PXP is reset, PGLUE would try to 9607 * read the payload data from PSWWR, but PSWWR would not 9608 * respond. The write queue in PGLUE would stuck, dmae commands 9609 * would not return. Therefore it's important to reset the second 9610 * reset register (containing the 9611 * MISC_REGISTERS_RESET_REG_2_RST_PXP_RQ_RD_WR bit) before the 9612 * first one (containing the MISC_REGISTERS_RESET_REG_1_RST_QM 9613 * bit). 9614 */ 9615 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, 9616 reset_mask2 & (~not_reset_mask2)); 9617 9618 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, 9619 reset_mask1 & (~not_reset_mask1)); 9620 9621 barrier(); 9622 mmiowb(); 9623 9624 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, 9625 reset_mask2 & (~stay_reset2)); 9626 9627 barrier(); 9628 mmiowb(); 9629 9630 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, reset_mask1); 9631 mmiowb(); 9632} 9633 9634/** 9635 * bnx2x_er_poll_igu_vq - poll for pending writes bit. 9636 * It should get cleared in no more than 1s. 9637 * 9638 * @bp: driver handle 9639 * 9640 * It should get cleared in no more than 1s. Returns 0 if 9641 * pending writes bit gets cleared. 9642 */ 9643static int bnx2x_er_poll_igu_vq(struct bnx2x *bp) 9644{ 9645 u32 cnt = 1000; 9646 u32 pend_bits = 0; 9647 9648 do { 9649 pend_bits = REG_RD(bp, IGU_REG_PENDING_BITS_STATUS); 9650 9651 if (pend_bits == 0) 9652 break; 9653 9654 usleep_range(1000, 2000); 9655 } while (cnt-- > 0); 9656 9657 if (cnt <= 0) { 9658 BNX2X_ERR("Still pending IGU requests pend_bits=%x!\n", 9659 pend_bits); 9660 return -EBUSY; 9661 } 9662 9663 return 0; 9664} 9665 9666static int bnx2x_process_kill(struct bnx2x *bp, bool global) 9667{ 9668 int cnt = 1000; 9669 u32 val = 0; 9670 u32 sr_cnt, blk_cnt, port_is_idle_0, port_is_idle_1, pgl_exp_rom2; 9671 u32 tags_63_32 = 0; 9672 9673 /* Empty the Tetris buffer, wait for 1s */ 9674 do { 9675 sr_cnt = REG_RD(bp, PXP2_REG_RD_SR_CNT); 9676 blk_cnt = REG_RD(bp, PXP2_REG_RD_BLK_CNT); 9677 port_is_idle_0 = REG_RD(bp, PXP2_REG_RD_PORT_IS_IDLE_0); 9678 port_is_idle_1 = REG_RD(bp, PXP2_REG_RD_PORT_IS_IDLE_1); 9679 pgl_exp_rom2 = REG_RD(bp, PXP2_REG_PGL_EXP_ROM2); 9680 if (CHIP_IS_E3(bp)) 9681 tags_63_32 = REG_RD(bp, PGLUE_B_REG_TAGS_63_32); 9682 9683 if ((sr_cnt == 0x7e) && (blk_cnt == 0xa0) && 9684 ((port_is_idle_0 & 0x1) == 0x1) && 9685 ((port_is_idle_1 & 0x1) == 0x1) && 9686 (pgl_exp_rom2 == 0xffffffff) && 9687 (!CHIP_IS_E3(bp) || (tags_63_32 == 0xffffffff))) 9688 break; 9689 usleep_range(1000, 2000); 9690 } while (cnt-- > 0); 9691 9692 if (cnt <= 0) { 9693 BNX2X_ERR("Tetris buffer didn't get empty or there are still outstanding read requests after 1s!\n"); 9694 BNX2X_ERR("sr_cnt=0x%08x, blk_cnt=0x%08x, port_is_idle_0=0x%08x, port_is_idle_1=0x%08x, pgl_exp_rom2=0x%08x\n", 9695 sr_cnt, blk_cnt, port_is_idle_0, port_is_idle_1, 9696 pgl_exp_rom2); 9697 return -EAGAIN; 9698 } 9699 9700 barrier(); 9701 9702 /* Close gates #2, #3 and #4 */ 9703 bnx2x_set_234_gates(bp, true); 9704 9705 /* Poll for IGU VQs for 57712 and newer chips */ 9706 if (!CHIP_IS_E1x(bp) && bnx2x_er_poll_igu_vq(bp)) 9707 return -EAGAIN; 9708 9709 /* TBD: Indicate that "process kill" is in progress to MCP */ 9710 9711 /* Clear "unprepared" bit */ 9712 REG_WR(bp, MISC_REG_UNPREPARED, 0); 9713 barrier(); 9714 9715 /* Make sure all is written to the chip before the reset */ 9716 mmiowb(); 9717 9718 /* Wait for 1ms to empty GLUE and PCI-E core queues, 9719 * PSWHST, GRC and PSWRD Tetris buffer. 9720 */ 9721 usleep_range(1000, 2000); 9722 9723 /* Prepare to chip reset: */ 9724 /* MCP */ 9725 if (global) 9726 bnx2x_reset_mcp_prep(bp, &val); 9727 9728 /* PXP */ 9729 bnx2x_pxp_prep(bp); 9730 barrier(); 9731 9732 /* reset the chip */ 9733 bnx2x_process_kill_chip_reset(bp, global); 9734 barrier(); 9735 9736 /* clear errors in PGB */ 9737 if (!CHIP_IS_E1x(bp)) 9738 REG_WR(bp, PGLUE_B_REG_LATCHED_ERRORS_CLR, 0x7f); 9739 9740 /* Recover after reset: */ 9741 /* MCP */ 9742 if (global && bnx2x_reset_mcp_comp(bp, val)) 9743 return -EAGAIN; 9744 9745 /* TBD: Add resetting the NO_MCP mode DB here */ 9746 9747 /* Open the gates #2, #3 and #4 */ 9748 bnx2x_set_234_gates(bp, false); 9749 9750 /* TBD: IGU/AEU preparation bring back the AEU/IGU to a 9751 * reset state, re-enable attentions. */ 9752 9753 return 0; 9754} 9755 9756static int bnx2x_leader_reset(struct bnx2x *bp) 9757{ 9758 int rc = 0; 9759 bool global = bnx2x_reset_is_global(bp); 9760 u32 load_code; 9761 9762 /* if not going to reset MCP - load "fake" driver to reset HW while 9763 * driver is owner of the HW 9764 */ 9765 if (!global && !BP_NOMCP(bp)) { 9766 load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ, 9767 DRV_MSG_CODE_LOAD_REQ_WITH_LFA); 9768 if (!load_code) { 9769 BNX2X_ERR("MCP response failure, aborting\n"); 9770 rc = -EAGAIN; 9771 goto exit_leader_reset; 9772 } 9773 if ((load_code != FW_MSG_CODE_DRV_LOAD_COMMON_CHIP) && 9774 (load_code != FW_MSG_CODE_DRV_LOAD_COMMON)) { 9775 BNX2X_ERR("MCP unexpected resp, aborting\n"); 9776 rc = -EAGAIN; 9777 goto exit_leader_reset2; 9778 } 9779 load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE, 0); 9780 if (!load_code) { 9781 BNX2X_ERR("MCP response failure, aborting\n"); 9782 rc = -EAGAIN; 9783 goto exit_leader_reset2; 9784 } 9785 } 9786 9787 /* Try to recover after the failure */ 9788 if (bnx2x_process_kill(bp, global)) { 9789 BNX2X_ERR("Something bad had happen on engine %d! Aii!\n", 9790 BP_PATH(bp)); 9791 rc = -EAGAIN; 9792 goto exit_leader_reset2; 9793 } 9794 9795 /* 9796 * Clear RESET_IN_PROGRES and RESET_GLOBAL bits and update the driver 9797 * state. 9798 */ 9799 bnx2x_set_reset_done(bp); 9800 if (global) 9801 bnx2x_clear_reset_global(bp); 9802 9803exit_leader_reset2: 9804 /* unload "fake driver" if it was loaded */ 9805 if (!global && !BP_NOMCP(bp)) { 9806 bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP, 0); 9807 bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE, 0); 9808 } 9809exit_leader_reset: 9810 bp->is_leader = 0; 9811 bnx2x_release_leader_lock(bp); 9812 smp_mb(); 9813 return rc; 9814} 9815 9816static void bnx2x_recovery_failed(struct bnx2x *bp) 9817{ 9818 netdev_err(bp->dev, "Recovery has failed. Power cycle is needed.\n"); 9819 9820 /* Disconnect this device */ 9821 netif_device_detach(bp->dev); 9822 9823 /* 9824 * Block ifup for all function on this engine until "process kill" 9825 * or power cycle. 9826 */ 9827 bnx2x_set_reset_in_progress(bp); 9828 9829 /* Shut down the power */ 9830 bnx2x_set_power_state(bp, PCI_D3hot); 9831 9832 bp->recovery_state = BNX2X_RECOVERY_FAILED; 9833 9834 smp_mb(); 9835} 9836 9837/* 9838 * Assumption: runs under rtnl lock. This together with the fact 9839 * that it's called only from bnx2x_sp_rtnl() ensure that it 9840 * will never be called when netif_running(bp->dev) is false. 9841 */ 9842static void bnx2x_parity_recover(struct bnx2x *bp) 9843{ 9844 bool global = false; 9845 u32 error_recovered, error_unrecovered; 9846 bool is_parity; 9847 9848 DP(NETIF_MSG_HW, "Handling parity\n"); 9849 while (1) { 9850 switch (bp->recovery_state) { 9851 case BNX2X_RECOVERY_INIT: 9852 DP(NETIF_MSG_HW, "State is BNX2X_RECOVERY_INIT\n"); 9853 is_parity = bnx2x_chk_parity_attn(bp, &global, false); 9854 WARN_ON(!is_parity); 9855 9856 /* Try to get a LEADER_LOCK HW lock */ 9857 if (bnx2x_trylock_leader_lock(bp)) { 9858 bnx2x_set_reset_in_progress(bp); 9859 /* 9860 * Check if there is a global attention and if 9861 * there was a global attention, set the global 9862 * reset bit. 9863 */ 9864 9865 if (global) 9866 bnx2x_set_reset_global(bp); 9867 9868 bp->is_leader = 1; 9869 } 9870 9871 /* Stop the driver */ 9872 /* If interface has been removed - break */ 9873 if (bnx2x_nic_unload(bp, UNLOAD_RECOVERY, false)) 9874 return; 9875 9876 bp->recovery_state = BNX2X_RECOVERY_WAIT; 9877 9878 /* Ensure "is_leader", MCP command sequence and 9879 * "recovery_state" update values are seen on other 9880 * CPUs. 9881 */ 9882 smp_mb(); 9883 break; 9884 9885 case BNX2X_RECOVERY_WAIT: 9886 DP(NETIF_MSG_HW, "State is BNX2X_RECOVERY_WAIT\n"); 9887 if (bp->is_leader) { 9888 int other_engine = BP_PATH(bp) ? 0 : 1; 9889 bool other_load_status = 9890 bnx2x_get_load_status(bp, other_engine); 9891 bool load_status = 9892 bnx2x_get_load_status(bp, BP_PATH(bp)); 9893 global = bnx2x_reset_is_global(bp); 9894 9895 /* 9896 * In case of a parity in a global block, let 9897 * the first leader that performs a 9898 * leader_reset() reset the global blocks in 9899 * order to clear global attentions. Otherwise 9900 * the gates will remain closed for that 9901 * engine. 9902 */ 9903 if (load_status || 9904 (global && other_load_status)) { 9905 /* Wait until all other functions get 9906 * down. 9907 */ 9908 schedule_delayed_work(&bp->sp_rtnl_task, 9909 HZ/10); 9910 return; 9911 } else { 9912 /* If all other functions got down - 9913 * try to bring the chip back to 9914 * normal. In any case it's an exit 9915 * point for a leader. 9916 */ 9917 if (bnx2x_leader_reset(bp)) { 9918 bnx2x_recovery_failed(bp); 9919 return; 9920 } 9921 9922 /* If we are here, means that the 9923 * leader has succeeded and doesn't 9924 * want to be a leader any more. Try 9925 * to continue as a none-leader. 9926 */ 9927 break; 9928 } 9929 } else { /* non-leader */ 9930 if (!bnx2x_reset_is_done(bp, BP_PATH(bp))) { 9931 /* Try to get a LEADER_LOCK HW lock as 9932 * long as a former leader may have 9933 * been unloaded by the user or 9934 * released a leadership by another 9935 * reason. 9936 */ 9937 if (bnx2x_trylock_leader_lock(bp)) { 9938 /* I'm a leader now! Restart a 9939 * switch case. 9940 */ 9941 bp->is_leader = 1; 9942 break; 9943 } 9944 9945 schedule_delayed_work(&bp->sp_rtnl_task, 9946 HZ/10); 9947 return; 9948 9949 } else { 9950 /* 9951 * If there was a global attention, wait 9952 * for it to be cleared. 9953 */ 9954 if (bnx2x_reset_is_global(bp)) { 9955 schedule_delayed_work( 9956 &bp->sp_rtnl_task, 9957 HZ/10); 9958 return; 9959 } 9960 9961 error_recovered = 9962 bp->eth_stats.recoverable_error; 9963 error_unrecovered = 9964 bp->eth_stats.unrecoverable_error; 9965 bp->recovery_state = 9966 BNX2X_RECOVERY_NIC_LOADING; 9967 if (bnx2x_nic_load(bp, LOAD_NORMAL)) { 9968 error_unrecovered++; 9969 netdev_err(bp->dev, 9970 "Recovery failed. Power cycle needed\n"); 9971 /* Disconnect this device */ 9972 netif_device_detach(bp->dev); 9973 /* Shut down the power */ 9974 bnx2x_set_power_state( 9975 bp, PCI_D3hot); 9976 smp_mb(); 9977 } else { 9978 bp->recovery_state = 9979 BNX2X_RECOVERY_DONE; 9980 error_recovered++; 9981 smp_mb(); 9982 } 9983 bp->eth_stats.recoverable_error = 9984 error_recovered; 9985 bp->eth_stats.unrecoverable_error = 9986 error_unrecovered; 9987 9988 return; 9989 } 9990 } 9991 default: 9992 return; 9993 } 9994 } 9995} 9996 9997static int bnx2x_close(struct net_device *dev); 9998 9999/* bnx2x_nic_unload() flushes the bnx2x_wq, thus reset task is 10000 * scheduled on a general queue in order to prevent a dead lock. 10001 */ 10002static void bnx2x_sp_rtnl_task(struct work_struct *work) 10003{ 10004 struct bnx2x *bp = container_of(work, struct bnx2x, sp_rtnl_task.work); 10005 10006 rtnl_lock(); 10007 10008 if (!netif_running(bp->dev)) { 10009 rtnl_unlock(); 10010 return; 10011 } 10012 10013 if (unlikely(bp->recovery_state != BNX2X_RECOVERY_DONE)) { 10014#ifdef BNX2X_STOP_ON_ERROR 10015 BNX2X_ERR("recovery flow called but STOP_ON_ERROR defined so reset not done to allow debug dump,\n" 10016 "you will need to reboot when done\n"); 10017 goto sp_rtnl_not_reset; 10018#endif 10019 /* 10020 * Clear all pending SP commands as we are going to reset the 10021 * function anyway. 10022 */ 10023 bp->sp_rtnl_state = 0; 10024 smp_mb(); 10025 10026 bnx2x_parity_recover(bp); 10027 10028 rtnl_unlock(); 10029 return; 10030 } 10031 10032 if (test_and_clear_bit(BNX2X_SP_RTNL_TX_TIMEOUT, &bp->sp_rtnl_state)) { 10033#ifdef BNX2X_STOP_ON_ERROR 10034 BNX2X_ERR("recovery flow called but STOP_ON_ERROR defined so reset not done to allow debug dump,\n" 10035 "you will need to reboot when done\n"); 10036 goto sp_rtnl_not_reset; 10037#endif 10038 10039 /* 10040 * Clear all pending SP commands as we are going to reset the 10041 * function anyway. 10042 */ 10043 bp->sp_rtnl_state = 0; 10044 smp_mb(); 10045 10046 bnx2x_nic_unload(bp, UNLOAD_NORMAL, true); 10047 bnx2x_nic_load(bp, LOAD_NORMAL); 10048 10049 rtnl_unlock(); 10050 return; 10051 } 10052#ifdef BNX2X_STOP_ON_ERROR 10053sp_rtnl_not_reset: 10054#endif 10055 if (test_and_clear_bit(BNX2X_SP_RTNL_SETUP_TC, &bp->sp_rtnl_state)) 10056 bnx2x_setup_tc(bp->dev, bp->dcbx_port_params.ets.num_of_cos); 10057 if (test_and_clear_bit(BNX2X_SP_RTNL_AFEX_F_UPDATE, &bp->sp_rtnl_state)) 10058 bnx2x_after_function_update(bp); 10059 /* 10060 * in case of fan failure we need to reset id if the "stop on error" 10061 * debug flag is set, since we trying to prevent permanent overheating 10062 * damage 10063 */ 10064 if (test_and_clear_bit(BNX2X_SP_RTNL_FAN_FAILURE, &bp->sp_rtnl_state)) { 10065 DP(NETIF_MSG_HW, "fan failure detected. Unloading driver\n"); 10066 netif_device_detach(bp->dev); 10067 bnx2x_close(bp->dev); 10068 rtnl_unlock(); 10069 return; 10070 } 10071 10072 if (test_and_clear_bit(BNX2X_SP_RTNL_VFPF_MCAST, &bp->sp_rtnl_state)) { 10073 DP(BNX2X_MSG_SP, 10074 "sending set mcast vf pf channel message from rtnl sp-task\n"); 10075 bnx2x_vfpf_set_mcast(bp->dev); 10076 } 10077 if (test_and_clear_bit(BNX2X_SP_RTNL_VFPF_CHANNEL_DOWN, 10078 &bp->sp_rtnl_state)){ 10079 if (!test_bit(__LINK_STATE_NOCARRIER, &bp->dev->state)) { 10080 bnx2x_tx_disable(bp); 10081 BNX2X_ERR("PF indicated channel is not servicable anymore. This means this VF device is no longer operational\n"); 10082 } 10083 } 10084 10085 if (test_and_clear_bit(BNX2X_SP_RTNL_RX_MODE, &bp->sp_rtnl_state)) { 10086 DP(BNX2X_MSG_SP, "Handling Rx Mode setting\n"); 10087 bnx2x_set_rx_mode_inner(bp); 10088 } 10089 10090 if (test_and_clear_bit(BNX2X_SP_RTNL_HYPERVISOR_VLAN, 10091 &bp->sp_rtnl_state)) 10092 bnx2x_pf_set_vfs_vlan(bp); 10093 10094 if (test_and_clear_bit(BNX2X_SP_RTNL_TX_STOP, &bp->sp_rtnl_state)) { 10095 bnx2x_dcbx_stop_hw_tx(bp); 10096 bnx2x_dcbx_resume_hw_tx(bp); 10097 } 10098 10099 if (test_and_clear_bit(BNX2X_SP_RTNL_GET_DRV_VERSION, 10100 &bp->sp_rtnl_state)) 10101 bnx2x_update_mng_version(bp); 10102 10103 /* work which needs rtnl lock not-taken (as it takes the lock itself and 10104 * can be called from other contexts as well) 10105 */ 10106 rtnl_unlock(); 10107 10108 /* enable SR-IOV if applicable */ 10109 if (IS_SRIOV(bp) && test_and_clear_bit(BNX2X_SP_RTNL_ENABLE_SRIOV, 10110 &bp->sp_rtnl_state)) { 10111 bnx2x_disable_sriov(bp); 10112 bnx2x_enable_sriov(bp); 10113 } 10114} 10115 10116static void bnx2x_period_task(struct work_struct *work) 10117{ 10118 struct bnx2x *bp = container_of(work, struct bnx2x, period_task.work); 10119 10120 if (!netif_running(bp->dev)) 10121 goto period_task_exit; 10122 10123 if (CHIP_REV_IS_SLOW(bp)) { 10124 BNX2X_ERR("period task called on emulation, ignoring\n"); 10125 goto period_task_exit; 10126 } 10127 10128 bnx2x_acquire_phy_lock(bp); 10129 /* 10130 * The barrier is needed to ensure the ordering between the writing to 10131 * the bp->port.pmf in the bnx2x_nic_load() or bnx2x_pmf_update() and 10132 * the reading here. 10133 */ 10134 smp_mb(); 10135 if (bp->port.pmf) { 10136 bnx2x_period_func(&bp->link_params, &bp->link_vars); 10137 10138 /* Re-queue task in 1 sec */ 10139 queue_delayed_work(bnx2x_wq, &bp->period_task, 1*HZ); 10140 } 10141 10142 bnx2x_release_phy_lock(bp); 10143period_task_exit: 10144 return; 10145} 10146 10147/* 10148 * Init service functions 10149 */ 10150 10151static u32 bnx2x_get_pretend_reg(struct bnx2x *bp) 10152{ 10153 u32 base = PXP2_REG_PGL_PRETEND_FUNC_F0; 10154 u32 stride = PXP2_REG_PGL_PRETEND_FUNC_F1 - base; 10155 return base + (BP_ABS_FUNC(bp)) * stride; 10156} 10157 10158static bool bnx2x_prev_unload_close_umac(struct bnx2x *bp, 10159 u8 port, u32 reset_reg, 10160 struct bnx2x_mac_vals *vals) 10161{ 10162 u32 mask = MISC_REGISTERS_RESET_REG_2_UMAC0 << port; 10163 u32 base_addr; 10164 10165 if (!(mask & reset_reg)) 10166 return false; 10167 10168 BNX2X_DEV_INFO("Disable umac Rx %02x\n", port); 10169 base_addr = port ? GRCBASE_UMAC1 : GRCBASE_UMAC0; 10170 vals->umac_addr[port] = base_addr + UMAC_REG_COMMAND_CONFIG; 10171 vals->umac_val[port] = REG_RD(bp, vals->umac_addr[port]); 10172 REG_WR(bp, vals->umac_addr[port], 0); 10173 10174 return true; 10175} 10176 10177static void bnx2x_prev_unload_close_mac(struct bnx2x *bp, 10178 struct bnx2x_mac_vals *vals) 10179{ 10180 u32 val, base_addr, offset, mask, reset_reg; 10181 bool mac_stopped = false; 10182 u8 port = BP_PORT(bp); 10183 10184 /* reset addresses as they also mark which values were changed */ 10185 memset(vals, 0, sizeof(*vals)); 10186 10187 reset_reg = REG_RD(bp, MISC_REG_RESET_REG_2); 10188 10189 if (!CHIP_IS_E3(bp)) { 10190 val = REG_RD(bp, NIG_REG_BMAC0_REGS_OUT_EN + port * 4); 10191 mask = MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port; 10192 if ((mask & reset_reg) && val) { 10193 u32 wb_data[2]; 10194 BNX2X_DEV_INFO("Disable bmac Rx\n"); 10195 base_addr = BP_PORT(bp) ? NIG_REG_INGRESS_BMAC1_MEM 10196 : NIG_REG_INGRESS_BMAC0_MEM; 10197 offset = CHIP_IS_E2(bp) ? BIGMAC2_REGISTER_BMAC_CONTROL 10198 : BIGMAC_REGISTER_BMAC_CONTROL; 10199 10200 /* 10201 * use rd/wr since we cannot use dmae. This is safe 10202 * since MCP won't access the bus due to the request 10203 * to unload, and no function on the path can be 10204 * loaded at this time. 10205 */ 10206 wb_data[0] = REG_RD(bp, base_addr + offset); 10207 wb_data[1] = REG_RD(bp, base_addr + offset + 0x4); 10208 vals->bmac_addr = base_addr + offset; 10209 vals->bmac_val[0] = wb_data[0]; 10210 vals->bmac_val[1] = wb_data[1]; 10211 wb_data[0] &= ~BMAC_CONTROL_RX_ENABLE; 10212 REG_WR(bp, vals->bmac_addr, wb_data[0]); 10213 REG_WR(bp, vals->bmac_addr + 0x4, wb_data[1]); 10214 } 10215 BNX2X_DEV_INFO("Disable emac Rx\n"); 10216 vals->emac_addr = NIG_REG_NIG_EMAC0_EN + BP_PORT(bp)*4; 10217 vals->emac_val = REG_RD(bp, vals->emac_addr); 10218 REG_WR(bp, vals->emac_addr, 0); 10219 mac_stopped = true; 10220 } else { 10221 if (reset_reg & MISC_REGISTERS_RESET_REG_2_XMAC) { 10222 BNX2X_DEV_INFO("Disable xmac Rx\n"); 10223 base_addr = BP_PORT(bp) ? GRCBASE_XMAC1 : GRCBASE_XMAC0; 10224 val = REG_RD(bp, base_addr + XMAC_REG_PFC_CTRL_HI); 10225 REG_WR(bp, base_addr + XMAC_REG_PFC_CTRL_HI, 10226 val & ~(1 << 1)); 10227 REG_WR(bp, base_addr + XMAC_REG_PFC_CTRL_HI, 10228 val | (1 << 1)); 10229 vals->xmac_addr = base_addr + XMAC_REG_CTRL; 10230 vals->xmac_val = REG_RD(bp, vals->xmac_addr); 10231 REG_WR(bp, vals->xmac_addr, 0); 10232 mac_stopped = true; 10233 } 10234 10235 mac_stopped |= bnx2x_prev_unload_close_umac(bp, 0, 10236 reset_reg, vals); 10237 mac_stopped |= bnx2x_prev_unload_close_umac(bp, 1, 10238 reset_reg, vals); 10239 } 10240 10241 if (mac_stopped) 10242 msleep(20); 10243} 10244 10245#define BNX2X_PREV_UNDI_PROD_ADDR(p) (BAR_TSTRORM_INTMEM + 0x1508 + ((p) << 4)) 10246#define BNX2X_PREV_UNDI_PROD_ADDR_H(f) (BAR_TSTRORM_INTMEM + \ 10247 0x1848 + ((f) << 4)) 10248#define BNX2X_PREV_UNDI_RCQ(val) ((val) & 0xffff) 10249#define BNX2X_PREV_UNDI_BD(val) ((val) >> 16 & 0xffff) 10250#define BNX2X_PREV_UNDI_PROD(rcq, bd) ((bd) << 16 | (rcq)) 10251 10252#define BCM_5710_UNDI_FW_MF_MAJOR (0x07) 10253#define BCM_5710_UNDI_FW_MF_MINOR (0x08) 10254#define BCM_5710_UNDI_FW_MF_VERS (0x05) 10255 10256static bool bnx2x_prev_is_after_undi(struct bnx2x *bp) 10257{ 10258 /* UNDI marks its presence in DORQ - 10259 * it initializes CID offset for normal bell to 0x7 10260 */ 10261 if (!(REG_RD(bp, MISC_REG_RESET_REG_1) & 10262 MISC_REGISTERS_RESET_REG_1_RST_DORQ)) 10263 return false; 10264 10265 if (REG_RD(bp, DORQ_REG_NORM_CID_OFST) == 0x7) { 10266 BNX2X_DEV_INFO("UNDI previously loaded\n"); 10267 return true; 10268 } 10269 10270 return false; 10271} 10272 10273static void bnx2x_prev_unload_undi_inc(struct bnx2x *bp, u8 inc) 10274{ 10275 u16 rcq, bd; 10276 u32 addr, tmp_reg; 10277 10278 if (BP_FUNC(bp) < 2) 10279 addr = BNX2X_PREV_UNDI_PROD_ADDR(BP_PORT(bp)); 10280 else 10281 addr = BNX2X_PREV_UNDI_PROD_ADDR_H(BP_FUNC(bp) - 2); 10282 10283 tmp_reg = REG_RD(bp, addr); 10284 rcq = BNX2X_PREV_UNDI_RCQ(tmp_reg) + inc; 10285 bd = BNX2X_PREV_UNDI_BD(tmp_reg) + inc; 10286 10287 tmp_reg = BNX2X_PREV_UNDI_PROD(rcq, bd); 10288 REG_WR(bp, addr, tmp_reg); 10289 10290 BNX2X_DEV_INFO("UNDI producer [%d/%d][%08x] rings bd -> 0x%04x, rcq -> 0x%04x\n", 10291 BP_PORT(bp), BP_FUNC(bp), addr, bd, rcq); 10292} 10293 10294static int bnx2x_prev_mcp_done(struct bnx2x *bp) 10295{ 10296 u32 rc = bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE, 10297 DRV_MSG_CODE_UNLOAD_SKIP_LINK_RESET); 10298 if (!rc) { 10299 BNX2X_ERR("MCP response failure, aborting\n"); 10300 return -EBUSY; 10301 } 10302 10303 return 0; 10304} 10305 10306static struct bnx2x_prev_path_list * 10307 bnx2x_prev_path_get_entry(struct bnx2x *bp) 10308{ 10309 struct bnx2x_prev_path_list *tmp_list; 10310 10311 list_for_each_entry(tmp_list, &bnx2x_prev_list, list) 10312 if (PCI_SLOT(bp->pdev->devfn) == tmp_list->slot && 10313 bp->pdev->bus->number == tmp_list->bus && 10314 BP_PATH(bp) == tmp_list->path) 10315 return tmp_list; 10316 10317 return NULL; 10318} 10319 10320static int bnx2x_prev_path_mark_eeh(struct bnx2x *bp) 10321{ 10322 struct bnx2x_prev_path_list *tmp_list; 10323 int rc; 10324 10325 rc = down_interruptible(&bnx2x_prev_sem); 10326 if (rc) { 10327 BNX2X_ERR("Received %d when tried to take lock\n", rc); 10328 return rc; 10329 } 10330 10331 tmp_list = bnx2x_prev_path_get_entry(bp); 10332 if (tmp_list) { 10333 tmp_list->aer = 1; 10334 rc = 0; 10335 } else { 10336 BNX2X_ERR("path %d: Entry does not exist for eeh; Flow occurs before initial insmod is over ?\n", 10337 BP_PATH(bp)); 10338 } 10339 10340 up(&bnx2x_prev_sem); 10341 10342 return rc; 10343} 10344 10345static bool bnx2x_prev_is_path_marked(struct bnx2x *bp) 10346{ 10347 struct bnx2x_prev_path_list *tmp_list; 10348 bool rc = false; 10349 10350 if (down_trylock(&bnx2x_prev_sem)) 10351 return false; 10352 10353 tmp_list = bnx2x_prev_path_get_entry(bp); 10354 if (tmp_list) { 10355 if (tmp_list->aer) { 10356 DP(NETIF_MSG_HW, "Path %d was marked by AER\n", 10357 BP_PATH(bp)); 10358 } else { 10359 rc = true; 10360 BNX2X_DEV_INFO("Path %d was already cleaned from previous drivers\n", 10361 BP_PATH(bp)); 10362 } 10363 } 10364 10365 up(&bnx2x_prev_sem); 10366 10367 return rc; 10368} 10369 10370bool bnx2x_port_after_undi(struct bnx2x *bp) 10371{ 10372 struct bnx2x_prev_path_list *entry; 10373 bool val; 10374 10375 down(&bnx2x_prev_sem); 10376 10377 entry = bnx2x_prev_path_get_entry(bp); 10378 val = !!(entry && (entry->undi & (1 << BP_PORT(bp)))); 10379 10380 up(&bnx2x_prev_sem); 10381 10382 return val; 10383} 10384 10385static int bnx2x_prev_mark_path(struct bnx2x *bp, bool after_undi) 10386{ 10387 struct bnx2x_prev_path_list *tmp_list; 10388 int rc; 10389 10390 rc = down_interruptible(&bnx2x_prev_sem); 10391 if (rc) { 10392 BNX2X_ERR("Received %d when tried to take lock\n", rc); 10393 return rc; 10394 } 10395 10396 /* Check whether the entry for this path already exists */ 10397 tmp_list = bnx2x_prev_path_get_entry(bp); 10398 if (tmp_list) { 10399 if (!tmp_list->aer) { 10400 BNX2X_ERR("Re-Marking the path.\n"); 10401 } else { 10402 DP(NETIF_MSG_HW, "Removing AER indication from path %d\n", 10403 BP_PATH(bp)); 10404 tmp_list->aer = 0; 10405 } 10406 up(&bnx2x_prev_sem); 10407 return 0; 10408 } 10409 up(&bnx2x_prev_sem); 10410 10411 /* Create an entry for this path and add it */ 10412 tmp_list = kmalloc(sizeof(struct bnx2x_prev_path_list), GFP_KERNEL); 10413 if (!tmp_list) { 10414 BNX2X_ERR("Failed to allocate 'bnx2x_prev_path_list'\n"); 10415 return -ENOMEM; 10416 } 10417 10418 tmp_list->bus = bp->pdev->bus->number; 10419 tmp_list->slot = PCI_SLOT(bp->pdev->devfn); 10420 tmp_list->path = BP_PATH(bp); 10421 tmp_list->aer = 0; 10422 tmp_list->undi = after_undi ? (1 << BP_PORT(bp)) : 0; 10423 10424 rc = down_interruptible(&bnx2x_prev_sem); 10425 if (rc) { 10426 BNX2X_ERR("Received %d when tried to take lock\n", rc); 10427 kfree(tmp_list); 10428 } else { 10429 DP(NETIF_MSG_HW, "Marked path [%d] - finished previous unload\n", 10430 BP_PATH(bp)); 10431 list_add(&tmp_list->list, &bnx2x_prev_list); 10432 up(&bnx2x_prev_sem); 10433 } 10434 10435 return rc; 10436} 10437 10438static int bnx2x_do_flr(struct bnx2x *bp) 10439{ 10440 struct pci_dev *dev = bp->pdev; 10441 10442 if (CHIP_IS_E1x(bp)) { 10443 BNX2X_DEV_INFO("FLR not supported in E1/E1H\n"); 10444 return -EINVAL; 10445 } 10446 10447 /* only bootcode REQ_BC_VER_4_INITIATE_FLR and onwards support flr */ 10448 if (bp->common.bc_ver < REQ_BC_VER_4_INITIATE_FLR) { 10449 BNX2X_ERR("FLR not supported by BC_VER: 0x%x\n", 10450 bp->common.bc_ver); 10451 return -EINVAL; 10452 } 10453 10454 if (!pci_wait_for_pending_transaction(dev)) 10455 dev_err(&dev->dev, "transaction is not cleared; proceeding with reset anyway\n"); 10456 10457 BNX2X_DEV_INFO("Initiating FLR\n"); 10458 bnx2x_fw_command(bp, DRV_MSG_CODE_INITIATE_FLR, 0); 10459 10460 return 0; 10461} 10462 10463static int bnx2x_prev_unload_uncommon(struct bnx2x *bp) 10464{ 10465 int rc; 10466 10467 BNX2X_DEV_INFO("Uncommon unload Flow\n"); 10468 10469 /* Test if previous unload process was already finished for this path */ 10470 if (bnx2x_prev_is_path_marked(bp)) 10471 return bnx2x_prev_mcp_done(bp); 10472 10473 BNX2X_DEV_INFO("Path is unmarked\n"); 10474 10475 /* Cannot proceed with FLR if UNDI is loaded, since FW does not match */ 10476 if (bnx2x_prev_is_after_undi(bp)) 10477 goto out; 10478 10479 /* If function has FLR capabilities, and existing FW version matches 10480 * the one required, then FLR will be sufficient to clean any residue 10481 * left by previous driver 10482 */ 10483 rc = bnx2x_compare_fw_ver(bp, FW_MSG_CODE_DRV_LOAD_FUNCTION, false); 10484 10485 if (!rc) { 10486 /* fw version is good */ 10487 BNX2X_DEV_INFO("FW version matches our own. Attempting FLR\n"); 10488 rc = bnx2x_do_flr(bp); 10489 } 10490 10491 if (!rc) { 10492 /* FLR was performed */ 10493 BNX2X_DEV_INFO("FLR successful\n"); 10494 return 0; 10495 } 10496 10497 BNX2X_DEV_INFO("Could not FLR\n"); 10498 10499out: 10500 /* Close the MCP request, return failure*/ 10501 rc = bnx2x_prev_mcp_done(bp); 10502 if (!rc) 10503 rc = BNX2X_PREV_WAIT_NEEDED; 10504 10505 return rc; 10506} 10507 10508static int bnx2x_prev_unload_common(struct bnx2x *bp) 10509{ 10510 u32 reset_reg, tmp_reg = 0, rc; 10511 bool prev_undi = false; 10512 struct bnx2x_mac_vals mac_vals; 10513 10514 /* It is possible a previous function received 'common' answer, 10515 * but hasn't loaded yet, therefore creating a scenario of 10516 * multiple functions receiving 'common' on the same path. 10517 */ 10518 BNX2X_DEV_INFO("Common unload Flow\n"); 10519 10520 memset(&mac_vals, 0, sizeof(mac_vals)); 10521 10522 if (bnx2x_prev_is_path_marked(bp)) 10523 return bnx2x_prev_mcp_done(bp); 10524 10525 reset_reg = REG_RD(bp, MISC_REG_RESET_REG_1); 10526 10527 /* Reset should be performed after BRB is emptied */ 10528 if (reset_reg & MISC_REGISTERS_RESET_REG_1_RST_BRB1) { 10529 u32 timer_count = 1000; 10530 10531 /* Close the MAC Rx to prevent BRB from filling up */ 10532 bnx2x_prev_unload_close_mac(bp, &mac_vals); 10533 10534 /* close LLH filters for both ports towards the BRB */ 10535 bnx2x_set_rx_filter(&bp->link_params, 0); 10536 bp->link_params.port ^= 1; 10537 bnx2x_set_rx_filter(&bp->link_params, 0); 10538 bp->link_params.port ^= 1; 10539 10540 /* Check if the UNDI driver was previously loaded */ 10541 if (bnx2x_prev_is_after_undi(bp)) { 10542 prev_undi = true; 10543 /* clear the UNDI indication */ 10544 REG_WR(bp, DORQ_REG_NORM_CID_OFST, 0); 10545 /* clear possible idle check errors */ 10546 REG_RD(bp, NIG_REG_NIG_INT_STS_CLR_0); 10547 } 10548 if (!CHIP_IS_E1x(bp)) 10549 /* block FW from writing to host */ 10550 REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 0); 10551 10552 /* wait until BRB is empty */ 10553 tmp_reg = REG_RD(bp, BRB1_REG_NUM_OF_FULL_BLOCKS); 10554 while (timer_count) { 10555 u32 prev_brb = tmp_reg; 10556 10557 tmp_reg = REG_RD(bp, BRB1_REG_NUM_OF_FULL_BLOCKS); 10558 if (!tmp_reg) 10559 break; 10560 10561 BNX2X_DEV_INFO("BRB still has 0x%08x\n", tmp_reg); 10562 10563 /* reset timer as long as BRB actually gets emptied */ 10564 if (prev_brb > tmp_reg) 10565 timer_count = 1000; 10566 else 10567 timer_count--; 10568 10569 /* If UNDI resides in memory, manually increment it */ 10570 if (prev_undi) 10571 bnx2x_prev_unload_undi_inc(bp, 1); 10572 10573 udelay(10); 10574 } 10575 10576 if (!timer_count) 10577 BNX2X_ERR("Failed to empty BRB, hope for the best\n"); 10578 } 10579 10580 /* No packets are in the pipeline, path is ready for reset */ 10581 bnx2x_reset_common(bp); 10582 10583 if (mac_vals.xmac_addr) 10584 REG_WR(bp, mac_vals.xmac_addr, mac_vals.xmac_val); 10585 if (mac_vals.umac_addr[0]) 10586 REG_WR(bp, mac_vals.umac_addr[0], mac_vals.umac_val[0]); 10587 if (mac_vals.umac_addr[1]) 10588 REG_WR(bp, mac_vals.umac_addr[1], mac_vals.umac_val[1]); 10589 if (mac_vals.emac_addr) 10590 REG_WR(bp, mac_vals.emac_addr, mac_vals.emac_val); 10591 if (mac_vals.bmac_addr) { 10592 REG_WR(bp, mac_vals.bmac_addr, mac_vals.bmac_val[0]); 10593 REG_WR(bp, mac_vals.bmac_addr + 4, mac_vals.bmac_val[1]); 10594 } 10595 10596 rc = bnx2x_prev_mark_path(bp, prev_undi); 10597 if (rc) { 10598 bnx2x_prev_mcp_done(bp); 10599 return rc; 10600 } 10601 10602 return bnx2x_prev_mcp_done(bp); 10603} 10604 10605static int bnx2x_prev_unload(struct bnx2x *bp) 10606{ 10607 int time_counter = 10; 10608 u32 rc, fw, hw_lock_reg, hw_lock_val; 10609 BNX2X_DEV_INFO("Entering Previous Unload Flow\n"); 10610 10611 /* clear hw from errors which may have resulted from an interrupted 10612 * dmae transaction. 10613 */ 10614 bnx2x_clean_pglue_errors(bp); 10615 10616 /* Release previously held locks */ 10617 hw_lock_reg = (BP_FUNC(bp) <= 5) ? 10618 (MISC_REG_DRIVER_CONTROL_1 + BP_FUNC(bp) * 8) : 10619 (MISC_REG_DRIVER_CONTROL_7 + (BP_FUNC(bp) - 6) * 8); 10620 10621 hw_lock_val = REG_RD(bp, hw_lock_reg); 10622 if (hw_lock_val) { 10623 if (hw_lock_val & HW_LOCK_RESOURCE_NVRAM) { 10624 BNX2X_DEV_INFO("Release Previously held NVRAM lock\n"); 10625 REG_WR(bp, MCP_REG_MCPR_NVM_SW_ARB, 10626 (MCPR_NVM_SW_ARB_ARB_REQ_CLR1 << BP_PORT(bp))); 10627 } 10628 10629 BNX2X_DEV_INFO("Release Previously held hw lock\n"); 10630 REG_WR(bp, hw_lock_reg, 0xffffffff); 10631 } else 10632 BNX2X_DEV_INFO("No need to release hw/nvram locks\n"); 10633 10634 if (MCPR_ACCESS_LOCK_LOCK & REG_RD(bp, MCP_REG_MCPR_ACCESS_LOCK)) { 10635 BNX2X_DEV_INFO("Release previously held alr\n"); 10636 bnx2x_release_alr(bp); 10637 } 10638 10639 do { 10640 int aer = 0; 10641 /* Lock MCP using an unload request */ 10642 fw = bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS, 0); 10643 if (!fw) { 10644 BNX2X_ERR("MCP response failure, aborting\n"); 10645 rc = -EBUSY; 10646 break; 10647 } 10648 10649 rc = down_interruptible(&bnx2x_prev_sem); 10650 if (rc) { 10651 BNX2X_ERR("Cannot check for AER; Received %d when tried to take lock\n", 10652 rc); 10653 } else { 10654 /* If Path is marked by EEH, ignore unload status */ 10655 aer = !!(bnx2x_prev_path_get_entry(bp) && 10656 bnx2x_prev_path_get_entry(bp)->aer); 10657 up(&bnx2x_prev_sem); 10658 } 10659 10660 if (fw == FW_MSG_CODE_DRV_UNLOAD_COMMON || aer) { 10661 rc = bnx2x_prev_unload_common(bp); 10662 break; 10663 } 10664 10665 /* non-common reply from MCP might require looping */ 10666 rc = bnx2x_prev_unload_uncommon(bp); 10667 if (rc != BNX2X_PREV_WAIT_NEEDED) 10668 break; 10669 10670 msleep(20); 10671 } while (--time_counter); 10672 10673 if (!time_counter || rc) { 10674 BNX2X_DEV_INFO("Unloading previous driver did not occur, Possibly due to MF UNDI\n"); 10675 rc = -EPROBE_DEFER; 10676 } 10677 10678 /* Mark function if its port was used to boot from SAN */ 10679 if (bnx2x_port_after_undi(bp)) 10680 bp->link_params.feature_config_flags |= 10681 FEATURE_CONFIG_BOOT_FROM_SAN; 10682 10683 BNX2X_DEV_INFO("Finished Previous Unload Flow [%d]\n", rc); 10684 10685 return rc; 10686} 10687 10688static void bnx2x_get_common_hwinfo(struct bnx2x *bp) 10689{ 10690 u32 val, val2, val3, val4, id, boot_mode; 10691 u16 pmc; 10692 10693 /* Get the chip revision id and number. */ 10694 /* chip num:16-31, rev:12-15, metal:4-11, bond_id:0-3 */ 10695 val = REG_RD(bp, MISC_REG_CHIP_NUM); 10696 id = ((val & 0xffff) << 16); 10697 val = REG_RD(bp, MISC_REG_CHIP_REV); 10698 id |= ((val & 0xf) << 12); 10699 10700 /* Metal is read from PCI regs, but we can't access >=0x400 from 10701 * the configuration space (so we need to reg_rd) 10702 */ 10703 val = REG_RD(bp, PCICFG_OFFSET + PCI_ID_VAL3); 10704 id |= (((val >> 24) & 0xf) << 4); 10705 val = REG_RD(bp, MISC_REG_BOND_ID); 10706 id |= (val & 0xf); 10707 bp->common.chip_id = id; 10708 10709 /* force 57811 according to MISC register */ 10710 if (REG_RD(bp, MISC_REG_CHIP_TYPE) & MISC_REG_CHIP_TYPE_57811_MASK) { 10711 if (CHIP_IS_57810(bp)) 10712 bp->common.chip_id = (CHIP_NUM_57811 << 16) | 10713 (bp->common.chip_id & 0x0000FFFF); 10714 else if (CHIP_IS_57810_MF(bp)) 10715 bp->common.chip_id = (CHIP_NUM_57811_MF << 16) | 10716 (bp->common.chip_id & 0x0000FFFF); 10717 bp->common.chip_id |= 0x1; 10718 } 10719 10720 /* Set doorbell size */ 10721 bp->db_size = (1 << BNX2X_DB_SHIFT); 10722 10723 if (!CHIP_IS_E1x(bp)) { 10724 val = REG_RD(bp, MISC_REG_PORT4MODE_EN_OVWR); 10725 if ((val & 1) == 0) 10726 val = REG_RD(bp, MISC_REG_PORT4MODE_EN); 10727 else 10728 val = (val >> 1) & 1; 10729 BNX2X_DEV_INFO("chip is in %s\n", val ? "4_PORT_MODE" : 10730 "2_PORT_MODE"); 10731 bp->common.chip_port_mode = val ? CHIP_4_PORT_MODE : 10732 CHIP_2_PORT_MODE; 10733 10734 if (CHIP_MODE_IS_4_PORT(bp)) 10735 bp->pfid = (bp->pf_num >> 1); /* 0..3 */ 10736 else 10737 bp->pfid = (bp->pf_num & 0x6); /* 0, 2, 4, 6 */ 10738 } else { 10739 bp->common.chip_port_mode = CHIP_PORT_MODE_NONE; /* N/A */ 10740 bp->pfid = bp->pf_num; /* 0..7 */ 10741 } 10742 10743 BNX2X_DEV_INFO("pf_id: %x", bp->pfid); 10744 10745 bp->link_params.chip_id = bp->common.chip_id; 10746 BNX2X_DEV_INFO("chip ID is 0x%x\n", id); 10747 10748 val = (REG_RD(bp, 0x2874) & 0x55); 10749 if ((bp->common.chip_id & 0x1) || 10750 (CHIP_IS_E1(bp) && val) || (CHIP_IS_E1H(bp) && (val == 0x55))) { 10751 bp->flags |= ONE_PORT_FLAG; 10752 BNX2X_DEV_INFO("single port device\n"); 10753 } 10754 10755 val = REG_RD(bp, MCP_REG_MCPR_NVM_CFG4); 10756 bp->common.flash_size = (BNX2X_NVRAM_1MB_SIZE << 10757 (val & MCPR_NVM_CFG4_FLASH_SIZE)); 10758 BNX2X_DEV_INFO("flash_size 0x%x (%d)\n", 10759 bp->common.flash_size, bp->common.flash_size); 10760 10761 bnx2x_init_shmem(bp); 10762 10763 bp->common.shmem2_base = REG_RD(bp, (BP_PATH(bp) ? 10764 MISC_REG_GENERIC_CR_1 : 10765 MISC_REG_GENERIC_CR_0)); 10766 10767 bp->link_params.shmem_base = bp->common.shmem_base; 10768 bp->link_params.shmem2_base = bp->common.shmem2_base; 10769 if (SHMEM2_RD(bp, size) > 10770 (u32)offsetof(struct shmem2_region, lfa_host_addr[BP_PORT(bp)])) 10771 bp->link_params.lfa_base = 10772 REG_RD(bp, bp->common.shmem2_base + 10773 (u32)offsetof(struct shmem2_region, 10774 lfa_host_addr[BP_PORT(bp)])); 10775 else 10776 bp->link_params.lfa_base = 0; 10777 BNX2X_DEV_INFO("shmem offset 0x%x shmem2 offset 0x%x\n", 10778 bp->common.shmem_base, bp->common.shmem2_base); 10779 10780 if (!bp->common.shmem_base) { 10781 BNX2X_DEV_INFO("MCP not active\n"); 10782 bp->flags |= NO_MCP_FLAG; 10783 return; 10784 } 10785 10786 bp->common.hw_config = SHMEM_RD(bp, dev_info.shared_hw_config.config); 10787 BNX2X_DEV_INFO("hw_config 0x%08x\n", bp->common.hw_config); 10788 10789 bp->link_params.hw_led_mode = ((bp->common.hw_config & 10790 SHARED_HW_CFG_LED_MODE_MASK) >> 10791 SHARED_HW_CFG_LED_MODE_SHIFT); 10792 10793 bp->link_params.feature_config_flags = 0; 10794 val = SHMEM_RD(bp, dev_info.shared_feature_config.config); 10795 if (val & SHARED_FEAT_CFG_OVERRIDE_PREEMPHASIS_CFG_ENABLED) 10796 bp->link_params.feature_config_flags |= 10797 FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED; 10798 else 10799 bp->link_params.feature_config_flags &= 10800 ~FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED; 10801 10802 val = SHMEM_RD(bp, dev_info.bc_rev) >> 8; 10803 bp->common.bc_ver = val; 10804 BNX2X_DEV_INFO("bc_ver %X\n", val); 10805 if (val < BNX2X_BC_VER) { 10806 /* for now only warn 10807 * later we might need to enforce this */ 10808 BNX2X_ERR("This driver needs bc_ver %X but found %X, please upgrade BC\n", 10809 BNX2X_BC_VER, val); 10810 } 10811 bp->link_params.feature_config_flags |= 10812 (val >= REQ_BC_VER_4_VRFY_FIRST_PHY_OPT_MDL) ? 10813 FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY : 0; 10814 10815 bp->link_params.feature_config_flags |= 10816 (val >= REQ_BC_VER_4_VRFY_SPECIFIC_PHY_OPT_MDL) ? 10817 FEATURE_CONFIG_BC_SUPPORTS_DUAL_PHY_OPT_MDL_VRFY : 0; 10818 bp->link_params.feature_config_flags |= 10819 (val >= REQ_BC_VER_4_VRFY_AFEX_SUPPORTED) ? 10820 FEATURE_CONFIG_BC_SUPPORTS_AFEX : 0; 10821 bp->link_params.feature_config_flags |= 10822 (val >= REQ_BC_VER_4_SFP_TX_DISABLE_SUPPORTED) ? 10823 FEATURE_CONFIG_BC_SUPPORTS_SFP_TX_DISABLED : 0; 10824 10825 bp->link_params.feature_config_flags |= 10826 (val >= REQ_BC_VER_4_MT_SUPPORTED) ? 10827 FEATURE_CONFIG_MT_SUPPORT : 0; 10828 10829 bp->flags |= (val >= REQ_BC_VER_4_PFC_STATS_SUPPORTED) ? 10830 BC_SUPPORTS_PFC_STATS : 0; 10831 10832 bp->flags |= (val >= REQ_BC_VER_4_FCOE_FEATURES) ? 10833 BC_SUPPORTS_FCOE_FEATURES : 0; 10834 10835 bp->flags |= (val >= REQ_BC_VER_4_DCBX_ADMIN_MSG_NON_PMF) ? 10836 BC_SUPPORTS_DCBX_MSG_NON_PMF : 0; 10837 10838 bp->flags |= (val >= REQ_BC_VER_4_RMMOD_CMD) ? 10839 BC_SUPPORTS_RMMOD_CMD : 0; 10840 10841 boot_mode = SHMEM_RD(bp, 10842 dev_info.port_feature_config[BP_PORT(bp)].mba_config) & 10843 PORT_FEATURE_MBA_BOOT_AGENT_TYPE_MASK; 10844 switch (boot_mode) { 10845 case PORT_FEATURE_MBA_BOOT_AGENT_TYPE_PXE: 10846 bp->common.boot_mode = FEATURE_ETH_BOOTMODE_PXE; 10847 break; 10848 case PORT_FEATURE_MBA_BOOT_AGENT_TYPE_ISCSIB: 10849 bp->common.boot_mode = FEATURE_ETH_BOOTMODE_ISCSI; 10850 break; 10851 case PORT_FEATURE_MBA_BOOT_AGENT_TYPE_FCOE_BOOT: 10852 bp->common.boot_mode = FEATURE_ETH_BOOTMODE_FCOE; 10853 break; 10854 case PORT_FEATURE_MBA_BOOT_AGENT_TYPE_NONE: 10855 bp->common.boot_mode = FEATURE_ETH_BOOTMODE_NONE; 10856 break; 10857 } 10858 10859 pci_read_config_word(bp->pdev, bp->pdev->pm_cap + PCI_PM_PMC, &pmc); 10860 bp->flags |= (pmc & PCI_PM_CAP_PME_D3cold) ? 0 : NO_WOL_FLAG; 10861 10862 BNX2X_DEV_INFO("%sWoL capable\n", 10863 (bp->flags & NO_WOL_FLAG) ? "not " : ""); 10864 10865 val = SHMEM_RD(bp, dev_info.shared_hw_config.part_num); 10866 val2 = SHMEM_RD(bp, dev_info.shared_hw_config.part_num[4]); 10867 val3 = SHMEM_RD(bp, dev_info.shared_hw_config.part_num[8]); 10868 val4 = SHMEM_RD(bp, dev_info.shared_hw_config.part_num[12]); 10869 10870 dev_info(&bp->pdev->dev, "part number %X-%X-%X-%X\n", 10871 val, val2, val3, val4); 10872} 10873 10874#define IGU_FID(val) GET_FIELD((val), IGU_REG_MAPPING_MEMORY_FID) 10875#define IGU_VEC(val) GET_FIELD((val), IGU_REG_MAPPING_MEMORY_VECTOR) 10876 10877static int bnx2x_get_igu_cam_info(struct bnx2x *bp) 10878{ 10879 int pfid = BP_FUNC(bp); 10880 int igu_sb_id; 10881 u32 val; 10882 u8 fid, igu_sb_cnt = 0; 10883 10884 bp->igu_base_sb = 0xff; 10885 if (CHIP_INT_MODE_IS_BC(bp)) { 10886 int vn = BP_VN(bp); 10887 igu_sb_cnt = bp->igu_sb_cnt; 10888 bp->igu_base_sb = (CHIP_MODE_IS_4_PORT(bp) ? pfid : vn) * 10889 FP_SB_MAX_E1x; 10890 10891 bp->igu_dsb_id = E1HVN_MAX * FP_SB_MAX_E1x + 10892 (CHIP_MODE_IS_4_PORT(bp) ? pfid : vn); 10893 10894 return 0; 10895 } 10896 10897 /* IGU in normal mode - read CAM */ 10898 for (igu_sb_id = 0; igu_sb_id < IGU_REG_MAPPING_MEMORY_SIZE; 10899 igu_sb_id++) { 10900 val = REG_RD(bp, IGU_REG_MAPPING_MEMORY + igu_sb_id * 4); 10901 if (!(val & IGU_REG_MAPPING_MEMORY_VALID)) 10902 continue; 10903 fid = IGU_FID(val); 10904 if ((fid & IGU_FID_ENCODE_IS_PF)) { 10905 if ((fid & IGU_FID_PF_NUM_MASK) != pfid) 10906 continue; 10907 if (IGU_VEC(val) == 0) 10908 /* default status block */ 10909 bp->igu_dsb_id = igu_sb_id; 10910 else { 10911 if (bp->igu_base_sb == 0xff) 10912 bp->igu_base_sb = igu_sb_id; 10913 igu_sb_cnt++; 10914 } 10915 } 10916 } 10917 10918#ifdef CONFIG_PCI_MSI 10919 /* Due to new PF resource allocation by MFW T7.4 and above, it's 10920 * optional that number of CAM entries will not be equal to the value 10921 * advertised in PCI. 10922 * Driver should use the minimal value of both as the actual status 10923 * block count 10924 */ 10925 bp->igu_sb_cnt = min_t(int, bp->igu_sb_cnt, igu_sb_cnt); 10926#endif 10927 10928 if (igu_sb_cnt == 0) { 10929 BNX2X_ERR("CAM configuration error\n"); 10930 return -EINVAL; 10931 } 10932 10933 return 0; 10934} 10935 10936static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg) 10937{ 10938 int cfg_size = 0, idx, port = BP_PORT(bp); 10939 10940 /* Aggregation of supported attributes of all external phys */ 10941 bp->port.supported[0] = 0; 10942 bp->port.supported[1] = 0; 10943 switch (bp->link_params.num_phys) { 10944 case 1: 10945 bp->port.supported[0] = bp->link_params.phy[INT_PHY].supported; 10946 cfg_size = 1; 10947 break; 10948 case 2: 10949 bp->port.supported[0] = bp->link_params.phy[EXT_PHY1].supported; 10950 cfg_size = 1; 10951 break; 10952 case 3: 10953 if (bp->link_params.multi_phy_config & 10954 PORT_HW_CFG_PHY_SWAPPED_ENABLED) { 10955 bp->port.supported[1] = 10956 bp->link_params.phy[EXT_PHY1].supported; 10957 bp->port.supported[0] = 10958 bp->link_params.phy[EXT_PHY2].supported; 10959 } else { 10960 bp->port.supported[0] = 10961 bp->link_params.phy[EXT_PHY1].supported; 10962 bp->port.supported[1] = 10963 bp->link_params.phy[EXT_PHY2].supported; 10964 } 10965 cfg_size = 2; 10966 break; 10967 } 10968 10969 if (!(bp->port.supported[0] || bp->port.supported[1])) { 10970 BNX2X_ERR("NVRAM config error. BAD phy config. PHY1 config 0x%x, PHY2 config 0x%x\n", 10971 SHMEM_RD(bp, 10972 dev_info.port_hw_config[port].external_phy_config), 10973 SHMEM_RD(bp, 10974 dev_info.port_hw_config[port].external_phy_config2)); 10975 return; 10976 } 10977 10978 if (CHIP_IS_E3(bp)) 10979 bp->port.phy_addr = REG_RD(bp, MISC_REG_WC0_CTRL_PHY_ADDR); 10980 else { 10981 switch (switch_cfg) { 10982 case SWITCH_CFG_1G: 10983 bp->port.phy_addr = REG_RD( 10984 bp, NIG_REG_SERDES0_CTRL_PHY_ADDR + port*0x10); 10985 break; 10986 case SWITCH_CFG_10G: 10987 bp->port.phy_addr = REG_RD( 10988 bp, NIG_REG_XGXS0_CTRL_PHY_ADDR + port*0x18); 10989 break; 10990 default: 10991 BNX2X_ERR("BAD switch_cfg link_config 0x%x\n", 10992 bp->port.link_config[0]); 10993 return; 10994 } 10995 } 10996 BNX2X_DEV_INFO("phy_addr 0x%x\n", bp->port.phy_addr); 10997 /* mask what we support according to speed_cap_mask per configuration */ 10998 for (idx = 0; idx < cfg_size; idx++) { 10999 if (!(bp->link_params.speed_cap_mask[idx] & 11000 PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF)) 11001 bp->port.supported[idx] &= ~SUPPORTED_10baseT_Half; 11002 11003 if (!(bp->link_params.speed_cap_mask[idx] & 11004 PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL)) 11005 bp->port.supported[idx] &= ~SUPPORTED_10baseT_Full; 11006 11007 if (!(bp->link_params.speed_cap_mask[idx] & 11008 PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF)) 11009 bp->port.supported[idx] &= ~SUPPORTED_100baseT_Half; 11010 11011 if (!(bp->link_params.speed_cap_mask[idx] & 11012 PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL)) 11013 bp->port.supported[idx] &= ~SUPPORTED_100baseT_Full; 11014 11015 if (!(bp->link_params.speed_cap_mask[idx] & 11016 PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) 11017 bp->port.supported[idx] &= ~(SUPPORTED_1000baseT_Half | 11018 SUPPORTED_1000baseT_Full); 11019 11020 if (!(bp->link_params.speed_cap_mask[idx] & 11021 PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G)) 11022 bp->port.supported[idx] &= ~SUPPORTED_2500baseX_Full; 11023 11024 if (!(bp->link_params.speed_cap_mask[idx] & 11025 PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) 11026 bp->port.supported[idx] &= ~SUPPORTED_10000baseT_Full; 11027 11028 if (!(bp->link_params.speed_cap_mask[idx] & 11029 PORT_HW_CFG_SPEED_CAPABILITY_D0_20G)) 11030 bp->port.supported[idx] &= ~SUPPORTED_20000baseKR2_Full; 11031 } 11032 11033 BNX2X_DEV_INFO("supported 0x%x 0x%x\n", bp->port.supported[0], 11034 bp->port.supported[1]); 11035} 11036 11037static void bnx2x_link_settings_requested(struct bnx2x *bp) 11038{ 11039 u32 link_config, idx, cfg_size = 0; 11040 bp->port.advertising[0] = 0; 11041 bp->port.advertising[1] = 0; 11042 switch (bp->link_params.num_phys) { 11043 case 1: 11044 case 2: 11045 cfg_size = 1; 11046 break; 11047 case 3: 11048 cfg_size = 2; 11049 break; 11050 } 11051 for (idx = 0; idx < cfg_size; idx++) { 11052 bp->link_params.req_duplex[idx] = DUPLEX_FULL; 11053 link_config = bp->port.link_config[idx]; 11054 switch (link_config & PORT_FEATURE_LINK_SPEED_MASK) { 11055 case PORT_FEATURE_LINK_SPEED_AUTO: 11056 if (bp->port.supported[idx] & SUPPORTED_Autoneg) { 11057 bp->link_params.req_line_speed[idx] = 11058 SPEED_AUTO_NEG; 11059 bp->port.advertising[idx] |= 11060 bp->port.supported[idx]; 11061 if (bp->link_params.phy[EXT_PHY1].type == 11062 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) 11063 bp->port.advertising[idx] |= 11064 (SUPPORTED_100baseT_Half | 11065 SUPPORTED_100baseT_Full); 11066 } else { 11067 /* force 10G, no AN */ 11068 bp->link_params.req_line_speed[idx] = 11069 SPEED_10000; 11070 bp->port.advertising[idx] |= 11071 (ADVERTISED_10000baseT_Full | 11072 ADVERTISED_FIBRE); 11073 continue; 11074 } 11075 break; 11076 11077 case PORT_FEATURE_LINK_SPEED_10M_FULL: 11078 if (bp->port.supported[idx] & SUPPORTED_10baseT_Full) { 11079 bp->link_params.req_line_speed[idx] = 11080 SPEED_10; 11081 bp->port.advertising[idx] |= 11082 (ADVERTISED_10baseT_Full | 11083 ADVERTISED_TP); 11084 } else { 11085 BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n", 11086 link_config, 11087 bp->link_params.speed_cap_mask[idx]); 11088 return; 11089 } 11090 break; 11091 11092 case PORT_FEATURE_LINK_SPEED_10M_HALF: 11093 if (bp->port.supported[idx] & SUPPORTED_10baseT_Half) { 11094 bp->link_params.req_line_speed[idx] = 11095 SPEED_10; 11096 bp->link_params.req_duplex[idx] = 11097 DUPLEX_HALF; 11098 bp->port.advertising[idx] |= 11099 (ADVERTISED_10baseT_Half | 11100 ADVERTISED_TP); 11101 } else { 11102 BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n", 11103 link_config, 11104 bp->link_params.speed_cap_mask[idx]); 11105 return; 11106 } 11107 break; 11108 11109 case PORT_FEATURE_LINK_SPEED_100M_FULL: 11110 if (bp->port.supported[idx] & 11111 SUPPORTED_100baseT_Full) { 11112 bp->link_params.req_line_speed[idx] = 11113 SPEED_100; 11114 bp->port.advertising[idx] |= 11115 (ADVERTISED_100baseT_Full | 11116 ADVERTISED_TP); 11117 } else { 11118 BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n", 11119 link_config, 11120 bp->link_params.speed_cap_mask[idx]); 11121 return; 11122 } 11123 break; 11124 11125 case PORT_FEATURE_LINK_SPEED_100M_HALF: 11126 if (bp->port.supported[idx] & 11127 SUPPORTED_100baseT_Half) { 11128 bp->link_params.req_line_speed[idx] = 11129 SPEED_100; 11130 bp->link_params.req_duplex[idx] = 11131 DUPLEX_HALF; 11132 bp->port.advertising[idx] |= 11133 (ADVERTISED_100baseT_Half | 11134 ADVERTISED_TP); 11135 } else { 11136 BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n", 11137 link_config, 11138 bp->link_params.speed_cap_mask[idx]); 11139 return; 11140 } 11141 break; 11142 11143 case PORT_FEATURE_LINK_SPEED_1G: 11144 if (bp->port.supported[idx] & 11145 SUPPORTED_1000baseT_Full) { 11146 bp->link_params.req_line_speed[idx] = 11147 SPEED_1000; 11148 bp->port.advertising[idx] |= 11149 (ADVERTISED_1000baseT_Full | 11150 ADVERTISED_TP); 11151 } else { 11152 BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n", 11153 link_config, 11154 bp->link_params.speed_cap_mask[idx]); 11155 return; 11156 } 11157 break; 11158 11159 case PORT_FEATURE_LINK_SPEED_2_5G: 11160 if (bp->port.supported[idx] & 11161 SUPPORTED_2500baseX_Full) { 11162 bp->link_params.req_line_speed[idx] = 11163 SPEED_2500; 11164 bp->port.advertising[idx] |= 11165 (ADVERTISED_2500baseX_Full | 11166 ADVERTISED_TP); 11167 } else { 11168 BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n", 11169 link_config, 11170 bp->link_params.speed_cap_mask[idx]); 11171 return; 11172 } 11173 break; 11174 11175 case PORT_FEATURE_LINK_SPEED_10G_CX4: 11176 if (bp->port.supported[idx] & 11177 SUPPORTED_10000baseT_Full) { 11178 bp->link_params.req_line_speed[idx] = 11179 SPEED_10000; 11180 bp->port.advertising[idx] |= 11181 (ADVERTISED_10000baseT_Full | 11182 ADVERTISED_FIBRE); 11183 } else { 11184 BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n", 11185 link_config, 11186 bp->link_params.speed_cap_mask[idx]); 11187 return; 11188 } 11189 break; 11190 case PORT_FEATURE_LINK_SPEED_20G: 11191 bp->link_params.req_line_speed[idx] = SPEED_20000; 11192 11193 break; 11194 default: 11195 BNX2X_ERR("NVRAM config error. BAD link speed link_config 0x%x\n", 11196 link_config); 11197 bp->link_params.req_line_speed[idx] = 11198 SPEED_AUTO_NEG; 11199 bp->port.advertising[idx] = 11200 bp->port.supported[idx]; 11201 break; 11202 } 11203 11204 bp->link_params.req_flow_ctrl[idx] = (link_config & 11205 PORT_FEATURE_FLOW_CONTROL_MASK); 11206 if (bp->link_params.req_flow_ctrl[idx] == 11207 BNX2X_FLOW_CTRL_AUTO) { 11208 if (!(bp->port.supported[idx] & SUPPORTED_Autoneg)) 11209 bp->link_params.req_flow_ctrl[idx] = 11210 BNX2X_FLOW_CTRL_NONE; 11211 else 11212 bnx2x_set_requested_fc(bp); 11213 } 11214 11215 BNX2X_DEV_INFO("req_line_speed %d req_duplex %d req_flow_ctrl 0x%x advertising 0x%x\n", 11216 bp->link_params.req_line_speed[idx], 11217 bp->link_params.req_duplex[idx], 11218 bp->link_params.req_flow_ctrl[idx], 11219 bp->port.advertising[idx]); 11220 } 11221} 11222 11223static void bnx2x_set_mac_buf(u8 *mac_buf, u32 mac_lo, u16 mac_hi) 11224{ 11225 __be16 mac_hi_be = cpu_to_be16(mac_hi); 11226 __be32 mac_lo_be = cpu_to_be32(mac_lo); 11227 memcpy(mac_buf, &mac_hi_be, sizeof(mac_hi_be)); 11228 memcpy(mac_buf + sizeof(mac_hi_be), &mac_lo_be, sizeof(mac_lo_be)); 11229} 11230 11231static void bnx2x_get_port_hwinfo(struct bnx2x *bp) 11232{ 11233 int port = BP_PORT(bp); 11234 u32 config; 11235 u32 ext_phy_type, ext_phy_config, eee_mode; 11236 11237 bp->link_params.bp = bp; 11238 bp->link_params.port = port; 11239 11240 bp->link_params.lane_config = 11241 SHMEM_RD(bp, dev_info.port_hw_config[port].lane_config); 11242 11243 bp->link_params.speed_cap_mask[0] = 11244 SHMEM_RD(bp, 11245 dev_info.port_hw_config[port].speed_capability_mask) & 11246 PORT_HW_CFG_SPEED_CAPABILITY_D0_MASK; 11247 bp->link_params.speed_cap_mask[1] = 11248 SHMEM_RD(bp, 11249 dev_info.port_hw_config[port].speed_capability_mask2) & 11250 PORT_HW_CFG_SPEED_CAPABILITY_D0_MASK; 11251 bp->port.link_config[0] = 11252 SHMEM_RD(bp, dev_info.port_feature_config[port].link_config); 11253 11254 bp->port.link_config[1] = 11255 SHMEM_RD(bp, dev_info.port_feature_config[port].link_config2); 11256 11257 bp->link_params.multi_phy_config = 11258 SHMEM_RD(bp, dev_info.port_hw_config[port].multi_phy_config); 11259 /* If the device is capable of WoL, set the default state according 11260 * to the HW 11261 */ 11262 config = SHMEM_RD(bp, dev_info.port_feature_config[port].config); 11263 bp->wol = (!(bp->flags & NO_WOL_FLAG) && 11264 (config & PORT_FEATURE_WOL_ENABLED)); 11265 11266 if ((config & PORT_FEAT_CFG_STORAGE_PERSONALITY_MASK) == 11267 PORT_FEAT_CFG_STORAGE_PERSONALITY_FCOE && !IS_MF(bp)) 11268 bp->flags |= NO_ISCSI_FLAG; 11269 if ((config & PORT_FEAT_CFG_STORAGE_PERSONALITY_MASK) == 11270 PORT_FEAT_CFG_STORAGE_PERSONALITY_ISCSI && !(IS_MF(bp))) 11271 bp->flags |= NO_FCOE_FLAG; 11272 11273 BNX2X_DEV_INFO("lane_config 0x%08x speed_cap_mask0 0x%08x link_config0 0x%08x\n", 11274 bp->link_params.lane_config, 11275 bp->link_params.speed_cap_mask[0], 11276 bp->port.link_config[0]); 11277 11278 bp->link_params.switch_cfg = (bp->port.link_config[0] & 11279 PORT_FEATURE_CONNECTED_SWITCH_MASK); 11280 bnx2x_phy_probe(&bp->link_params); 11281 bnx2x_link_settings_supported(bp, bp->link_params.switch_cfg); 11282 11283 bnx2x_link_settings_requested(bp); 11284 11285 /* 11286 * If connected directly, work with the internal PHY, otherwise, work 11287 * with the external PHY 11288 */ 11289 ext_phy_config = 11290 SHMEM_RD(bp, 11291 dev_info.port_hw_config[port].external_phy_config); 11292 ext_phy_type = XGXS_EXT_PHY_TYPE(ext_phy_config); 11293 if (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) 11294 bp->mdio.prtad = bp->port.phy_addr; 11295 11296 else if ((ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) && 11297 (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN)) 11298 bp->mdio.prtad = 11299 XGXS_EXT_PHY_ADDR(ext_phy_config); 11300 11301 /* Configure link feature according to nvram value */ 11302 eee_mode = (((SHMEM_RD(bp, dev_info. 11303 port_feature_config[port].eee_power_mode)) & 11304 PORT_FEAT_CFG_EEE_POWER_MODE_MASK) >> 11305 PORT_FEAT_CFG_EEE_POWER_MODE_SHIFT); 11306 if (eee_mode != PORT_FEAT_CFG_EEE_POWER_MODE_DISABLED) { 11307 bp->link_params.eee_mode = EEE_MODE_ADV_LPI | 11308 EEE_MODE_ENABLE_LPI | 11309 EEE_MODE_OUTPUT_TIME; 11310 } else { 11311 bp->link_params.eee_mode = 0; 11312 } 11313} 11314 11315void bnx2x_get_iscsi_info(struct bnx2x *bp) 11316{ 11317 u32 no_flags = NO_ISCSI_FLAG; 11318 int port = BP_PORT(bp); 11319 u32 max_iscsi_conn = FW_ENCODE_32BIT_PATTERN ^ SHMEM_RD(bp, 11320 drv_lic_key[port].max_iscsi_conn); 11321 11322 if (!CNIC_SUPPORT(bp)) { 11323 bp->flags |= no_flags; 11324 return; 11325 } 11326 11327 /* Get the number of maximum allowed iSCSI connections */ 11328 bp->cnic_eth_dev.max_iscsi_conn = 11329 (max_iscsi_conn & BNX2X_MAX_ISCSI_INIT_CONN_MASK) >> 11330 BNX2X_MAX_ISCSI_INIT_CONN_SHIFT; 11331 11332 BNX2X_DEV_INFO("max_iscsi_conn 0x%x\n", 11333 bp->cnic_eth_dev.max_iscsi_conn); 11334 11335 /* 11336 * If maximum allowed number of connections is zero - 11337 * disable the feature. 11338 */ 11339 if (!bp->cnic_eth_dev.max_iscsi_conn) 11340 bp->flags |= no_flags; 11341} 11342 11343static void bnx2x_get_ext_wwn_info(struct bnx2x *bp, int func) 11344{ 11345 /* Port info */ 11346 bp->cnic_eth_dev.fcoe_wwn_port_name_hi = 11347 MF_CFG_RD(bp, func_ext_config[func].fcoe_wwn_port_name_upper); 11348 bp->cnic_eth_dev.fcoe_wwn_port_name_lo = 11349 MF_CFG_RD(bp, func_ext_config[func].fcoe_wwn_port_name_lower); 11350 11351 /* Node info */ 11352 bp->cnic_eth_dev.fcoe_wwn_node_name_hi = 11353 MF_CFG_RD(bp, func_ext_config[func].fcoe_wwn_node_name_upper); 11354 bp->cnic_eth_dev.fcoe_wwn_node_name_lo = 11355 MF_CFG_RD(bp, func_ext_config[func].fcoe_wwn_node_name_lower); 11356} 11357 11358static int bnx2x_shared_fcoe_funcs(struct bnx2x *bp) 11359{ 11360 u8 count = 0; 11361 11362 if (IS_MF(bp)) { 11363 u8 fid; 11364 11365 /* iterate over absolute function ids for this path: */ 11366 for (fid = BP_PATH(bp); fid < E2_FUNC_MAX * 2; fid += 2) { 11367 if (IS_MF_SD(bp)) { 11368 u32 cfg = MF_CFG_RD(bp, 11369 func_mf_config[fid].config); 11370 11371 if (!(cfg & FUNC_MF_CFG_FUNC_HIDE) && 11372 ((cfg & FUNC_MF_CFG_PROTOCOL_MASK) == 11373 FUNC_MF_CFG_PROTOCOL_FCOE)) 11374 count++; 11375 } else { 11376 u32 cfg = MF_CFG_RD(bp, 11377 func_ext_config[fid]. 11378 func_cfg); 11379 11380 if ((cfg & MACP_FUNC_CFG_FLAGS_ENABLED) && 11381 (cfg & MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD)) 11382 count++; 11383 } 11384 } 11385 } else { /* SF */ 11386 int port, port_cnt = CHIP_MODE_IS_4_PORT(bp) ? 2 : 1; 11387 11388 for (port = 0; port < port_cnt; port++) { 11389 u32 lic = SHMEM_RD(bp, 11390 drv_lic_key[port].max_fcoe_conn) ^ 11391 FW_ENCODE_32BIT_PATTERN; 11392 if (lic) 11393 count++; 11394 } 11395 } 11396 11397 return count; 11398} 11399 11400static void bnx2x_get_fcoe_info(struct bnx2x *bp) 11401{ 11402 int port = BP_PORT(bp); 11403 int func = BP_ABS_FUNC(bp); 11404 u32 max_fcoe_conn = FW_ENCODE_32BIT_PATTERN ^ SHMEM_RD(bp, 11405 drv_lic_key[port].max_fcoe_conn); 11406 u8 num_fcoe_func = bnx2x_shared_fcoe_funcs(bp); 11407 11408 if (!CNIC_SUPPORT(bp)) { 11409 bp->flags |= NO_FCOE_FLAG; 11410 return; 11411 } 11412 11413 /* Get the number of maximum allowed FCoE connections */ 11414 bp->cnic_eth_dev.max_fcoe_conn = 11415 (max_fcoe_conn & BNX2X_MAX_FCOE_INIT_CONN_MASK) >> 11416 BNX2X_MAX_FCOE_INIT_CONN_SHIFT; 11417 11418 /* Calculate the number of maximum allowed FCoE tasks */ 11419 bp->cnic_eth_dev.max_fcoe_exchanges = MAX_NUM_FCOE_TASKS_PER_ENGINE; 11420 11421 /* check if FCoE resources must be shared between different functions */ 11422 if (num_fcoe_func) 11423 bp->cnic_eth_dev.max_fcoe_exchanges /= num_fcoe_func; 11424 11425 /* Read the WWN: */ 11426 if (!IS_MF(bp)) { 11427 /* Port info */ 11428 bp->cnic_eth_dev.fcoe_wwn_port_name_hi = 11429 SHMEM_RD(bp, 11430 dev_info.port_hw_config[port]. 11431 fcoe_wwn_port_name_upper); 11432 bp->cnic_eth_dev.fcoe_wwn_port_name_lo = 11433 SHMEM_RD(bp, 11434 dev_info.port_hw_config[port]. 11435 fcoe_wwn_port_name_lower); 11436 11437 /* Node info */ 11438 bp->cnic_eth_dev.fcoe_wwn_node_name_hi = 11439 SHMEM_RD(bp, 11440 dev_info.port_hw_config[port]. 11441 fcoe_wwn_node_name_upper); 11442 bp->cnic_eth_dev.fcoe_wwn_node_name_lo = 11443 SHMEM_RD(bp, 11444 dev_info.port_hw_config[port]. 11445 fcoe_wwn_node_name_lower); 11446 } else if (!IS_MF_SD(bp)) { 11447 /* Read the WWN info only if the FCoE feature is enabled for 11448 * this function. 11449 */ 11450 if (BNX2X_HAS_MF_EXT_PROTOCOL_FCOE(bp)) 11451 bnx2x_get_ext_wwn_info(bp, func); 11452 } else { 11453 if (BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp) && !CHIP_IS_E1x(bp)) 11454 bnx2x_get_ext_wwn_info(bp, func); 11455 } 11456 11457 BNX2X_DEV_INFO("max_fcoe_conn 0x%x\n", bp->cnic_eth_dev.max_fcoe_conn); 11458 11459 /* 11460 * If maximum allowed number of connections is zero - 11461 * disable the feature. 11462 */ 11463 if (!bp->cnic_eth_dev.max_fcoe_conn) 11464 bp->flags |= NO_FCOE_FLAG; 11465} 11466 11467static void bnx2x_get_cnic_info(struct bnx2x *bp) 11468{ 11469 /* 11470 * iSCSI may be dynamically disabled but reading 11471 * info here we will decrease memory usage by driver 11472 * if the feature is disabled for good 11473 */ 11474 bnx2x_get_iscsi_info(bp); 11475 bnx2x_get_fcoe_info(bp); 11476} 11477 11478static void bnx2x_get_cnic_mac_hwinfo(struct bnx2x *bp) 11479{ 11480 u32 val, val2; 11481 int func = BP_ABS_FUNC(bp); 11482 int port = BP_PORT(bp); 11483 u8 *iscsi_mac = bp->cnic_eth_dev.iscsi_mac; 11484 u8 *fip_mac = bp->fip_mac; 11485 11486 if (IS_MF(bp)) { 11487 /* iSCSI and FCoE NPAR MACs: if there is no either iSCSI or 11488 * FCoE MAC then the appropriate feature should be disabled. 11489 * In non SD mode features configuration comes from struct 11490 * func_ext_config. 11491 */ 11492 if (!IS_MF_SD(bp)) { 11493 u32 cfg = MF_CFG_RD(bp, func_ext_config[func].func_cfg); 11494 if (cfg & MACP_FUNC_CFG_FLAGS_ISCSI_OFFLOAD) { 11495 val2 = MF_CFG_RD(bp, func_ext_config[func]. 11496 iscsi_mac_addr_upper); 11497 val = MF_CFG_RD(bp, func_ext_config[func]. 11498 iscsi_mac_addr_lower); 11499 bnx2x_set_mac_buf(iscsi_mac, val, val2); 11500 BNX2X_DEV_INFO 11501 ("Read iSCSI MAC: %pM\n", iscsi_mac); 11502 } else { 11503 bp->flags |= NO_ISCSI_OOO_FLAG | NO_ISCSI_FLAG; 11504 } 11505 11506 if (cfg & MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD) { 11507 val2 = MF_CFG_RD(bp, func_ext_config[func]. 11508 fcoe_mac_addr_upper); 11509 val = MF_CFG_RD(bp, func_ext_config[func]. 11510 fcoe_mac_addr_lower); 11511 bnx2x_set_mac_buf(fip_mac, val, val2); 11512 BNX2X_DEV_INFO 11513 ("Read FCoE L2 MAC: %pM\n", fip_mac); 11514 } else { 11515 bp->flags |= NO_FCOE_FLAG; 11516 } 11517 11518 bp->mf_ext_config = cfg; 11519 11520 } else { /* SD MODE */ 11521 if (BNX2X_IS_MF_SD_PROTOCOL_ISCSI(bp)) { 11522 /* use primary mac as iscsi mac */ 11523 memcpy(iscsi_mac, bp->dev->dev_addr, ETH_ALEN); 11524 11525 BNX2X_DEV_INFO("SD ISCSI MODE\n"); 11526 BNX2X_DEV_INFO 11527 ("Read iSCSI MAC: %pM\n", iscsi_mac); 11528 } else if (BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp)) { 11529 /* use primary mac as fip mac */ 11530 memcpy(fip_mac, bp->dev->dev_addr, ETH_ALEN); 11531 BNX2X_DEV_INFO("SD FCoE MODE\n"); 11532 BNX2X_DEV_INFO 11533 ("Read FIP MAC: %pM\n", fip_mac); 11534 } 11535 } 11536 11537 /* If this is a storage-only interface, use SAN mac as 11538 * primary MAC. Notice that for SD this is already the case, 11539 * as the SAN mac was copied from the primary MAC. 11540 */ 11541 if (IS_MF_FCOE_AFEX(bp)) 11542 memcpy(bp->dev->dev_addr, fip_mac, ETH_ALEN); 11543 } else { 11544 val2 = SHMEM_RD(bp, dev_info.port_hw_config[port]. 11545 iscsi_mac_upper); 11546 val = SHMEM_RD(bp, dev_info.port_hw_config[port]. 11547 iscsi_mac_lower); 11548 bnx2x_set_mac_buf(iscsi_mac, val, val2); 11549 11550 val2 = SHMEM_RD(bp, dev_info.port_hw_config[port]. 11551 fcoe_fip_mac_upper); 11552 val = SHMEM_RD(bp, dev_info.port_hw_config[port]. 11553 fcoe_fip_mac_lower); 11554 bnx2x_set_mac_buf(fip_mac, val, val2); 11555 } 11556 11557 /* Disable iSCSI OOO if MAC configuration is invalid. */ 11558 if (!is_valid_ether_addr(iscsi_mac)) { 11559 bp->flags |= NO_ISCSI_OOO_FLAG | NO_ISCSI_FLAG; 11560 eth_zero_addr(iscsi_mac); 11561 } 11562 11563 /* Disable FCoE if MAC configuration is invalid. */ 11564 if (!is_valid_ether_addr(fip_mac)) { 11565 bp->flags |= NO_FCOE_FLAG; 11566 eth_zero_addr(bp->fip_mac); 11567 } 11568} 11569 11570static void bnx2x_get_mac_hwinfo(struct bnx2x *bp) 11571{ 11572 u32 val, val2; 11573 int func = BP_ABS_FUNC(bp); 11574 int port = BP_PORT(bp); 11575 11576 /* Zero primary MAC configuration */ 11577 eth_zero_addr(bp->dev->dev_addr); 11578 11579 if (BP_NOMCP(bp)) { 11580 BNX2X_ERROR("warning: random MAC workaround active\n"); 11581 eth_hw_addr_random(bp->dev); 11582 } else if (IS_MF(bp)) { 11583 val2 = MF_CFG_RD(bp, func_mf_config[func].mac_upper); 11584 val = MF_CFG_RD(bp, func_mf_config[func].mac_lower); 11585 if ((val2 != FUNC_MF_CFG_UPPERMAC_DEFAULT) && 11586 (val != FUNC_MF_CFG_LOWERMAC_DEFAULT)) 11587 bnx2x_set_mac_buf(bp->dev->dev_addr, val, val2); 11588 11589 if (CNIC_SUPPORT(bp)) 11590 bnx2x_get_cnic_mac_hwinfo(bp); 11591 } else { 11592 /* in SF read MACs from port configuration */ 11593 val2 = SHMEM_RD(bp, dev_info.port_hw_config[port].mac_upper); 11594 val = SHMEM_RD(bp, dev_info.port_hw_config[port].mac_lower); 11595 bnx2x_set_mac_buf(bp->dev->dev_addr, val, val2); 11596 11597 if (CNIC_SUPPORT(bp)) 11598 bnx2x_get_cnic_mac_hwinfo(bp); 11599 } 11600 11601 if (!BP_NOMCP(bp)) { 11602 /* Read physical port identifier from shmem */ 11603 val2 = SHMEM_RD(bp, dev_info.port_hw_config[port].mac_upper); 11604 val = SHMEM_RD(bp, dev_info.port_hw_config[port].mac_lower); 11605 bnx2x_set_mac_buf(bp->phys_port_id, val, val2); 11606 bp->flags |= HAS_PHYS_PORT_ID; 11607 } 11608 11609 memcpy(bp->link_params.mac_addr, bp->dev->dev_addr, ETH_ALEN); 11610 11611 if (!is_valid_ether_addr(bp->dev->dev_addr)) 11612 dev_err(&bp->pdev->dev, 11613 "bad Ethernet MAC address configuration: %pM\n" 11614 "change it manually before bringing up the appropriate network interface\n", 11615 bp->dev->dev_addr); 11616} 11617 11618static bool bnx2x_get_dropless_info(struct bnx2x *bp) 11619{ 11620 int tmp; 11621 u32 cfg; 11622 11623 if (IS_VF(bp)) 11624 return false; 11625 11626 if (IS_MF(bp) && !CHIP_IS_E1x(bp)) { 11627 /* Take function: tmp = func */ 11628 tmp = BP_ABS_FUNC(bp); 11629 cfg = MF_CFG_RD(bp, func_ext_config[tmp].func_cfg); 11630 cfg = !!(cfg & MACP_FUNC_CFG_PAUSE_ON_HOST_RING); 11631 } else { 11632 /* Take port: tmp = port */ 11633 tmp = BP_PORT(bp); 11634 cfg = SHMEM_RD(bp, 11635 dev_info.port_hw_config[tmp].generic_features); 11636 cfg = !!(cfg & PORT_HW_CFG_PAUSE_ON_HOST_RING_ENABLED); 11637 } 11638 return cfg; 11639} 11640 11641static void validate_set_si_mode(struct bnx2x *bp) 11642{ 11643 u8 func = BP_ABS_FUNC(bp); 11644 u32 val; 11645 11646 val = MF_CFG_RD(bp, func_mf_config[func].mac_upper); 11647 11648 /* check for legal mac (upper bytes) */ 11649 if (val != 0xffff) { 11650 bp->mf_mode = MULTI_FUNCTION_SI; 11651 bp->mf_config[BP_VN(bp)] = 11652 MF_CFG_RD(bp, func_mf_config[func].config); 11653 } else 11654 BNX2X_DEV_INFO("illegal MAC address for SI\n"); 11655} 11656 11657static int bnx2x_get_hwinfo(struct bnx2x *bp) 11658{ 11659 int /*abs*/func = BP_ABS_FUNC(bp); 11660 int vn; 11661 u32 val = 0, val2 = 0; 11662 int rc = 0; 11663 11664 /* Validate that chip access is feasible */ 11665 if (REG_RD(bp, MISC_REG_CHIP_NUM) == 0xffffffff) { 11666 dev_err(&bp->pdev->dev, 11667 "Chip read returns all Fs. Preventing probe from continuing\n"); 11668 return -EINVAL; 11669 } 11670 11671 bnx2x_get_common_hwinfo(bp); 11672 11673 /* 11674 * initialize IGU parameters 11675 */ 11676 if (CHIP_IS_E1x(bp)) { 11677 bp->common.int_block = INT_BLOCK_HC; 11678 11679 bp->igu_dsb_id = DEF_SB_IGU_ID; 11680 bp->igu_base_sb = 0; 11681 } else { 11682 bp->common.int_block = INT_BLOCK_IGU; 11683 11684 /* do not allow device reset during IGU info processing */ 11685 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RESET); 11686 11687 val = REG_RD(bp, IGU_REG_BLOCK_CONFIGURATION); 11688 11689 if (val & IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN) { 11690 int tout = 5000; 11691 11692 BNX2X_DEV_INFO("FORCING Normal Mode\n"); 11693 11694 val &= ~(IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN); 11695 REG_WR(bp, IGU_REG_BLOCK_CONFIGURATION, val); 11696 REG_WR(bp, IGU_REG_RESET_MEMORIES, 0x7f); 11697 11698 while (tout && REG_RD(bp, IGU_REG_RESET_MEMORIES)) { 11699 tout--; 11700 usleep_range(1000, 2000); 11701 } 11702 11703 if (REG_RD(bp, IGU_REG_RESET_MEMORIES)) { 11704 dev_err(&bp->pdev->dev, 11705 "FORCING Normal Mode failed!!!\n"); 11706 bnx2x_release_hw_lock(bp, 11707 HW_LOCK_RESOURCE_RESET); 11708 return -EPERM; 11709 } 11710 } 11711 11712 if (val & IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN) { 11713 BNX2X_DEV_INFO("IGU Backward Compatible Mode\n"); 11714 bp->common.int_block |= INT_BLOCK_MODE_BW_COMP; 11715 } else 11716 BNX2X_DEV_INFO("IGU Normal Mode\n"); 11717 11718 rc = bnx2x_get_igu_cam_info(bp); 11719 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RESET); 11720 if (rc) 11721 return rc; 11722 } 11723 11724 /* 11725 * set base FW non-default (fast path) status block id, this value is 11726 * used to initialize the fw_sb_id saved on the fp/queue structure to 11727 * determine the id used by the FW. 11728 */ 11729 if (CHIP_IS_E1x(bp)) 11730 bp->base_fw_ndsb = BP_PORT(bp) * FP_SB_MAX_E1x + BP_L_ID(bp); 11731 else /* 11732 * 57712 - we currently use one FW SB per IGU SB (Rx and Tx of 11733 * the same queue are indicated on the same IGU SB). So we prefer 11734 * FW and IGU SBs to be the same value. 11735 */ 11736 bp->base_fw_ndsb = bp->igu_base_sb; 11737 11738 BNX2X_DEV_INFO("igu_dsb_id %d igu_base_sb %d igu_sb_cnt %d\n" 11739 "base_fw_ndsb %d\n", bp->igu_dsb_id, bp->igu_base_sb, 11740 bp->igu_sb_cnt, bp->base_fw_ndsb); 11741 11742 /* 11743 * Initialize MF configuration 11744 */ 11745 11746 bp->mf_ov = 0; 11747 bp->mf_mode = 0; 11748 bp->mf_sub_mode = 0; 11749 vn = BP_VN(bp); 11750 11751 if (!CHIP_IS_E1(bp) && !BP_NOMCP(bp)) { 11752 BNX2X_DEV_INFO("shmem2base 0x%x, size %d, mfcfg offset %d\n", 11753 bp->common.shmem2_base, SHMEM2_RD(bp, size), 11754 (u32)offsetof(struct shmem2_region, mf_cfg_addr)); 11755 11756 if (SHMEM2_HAS(bp, mf_cfg_addr)) 11757 bp->common.mf_cfg_base = SHMEM2_RD(bp, mf_cfg_addr); 11758 else 11759 bp->common.mf_cfg_base = bp->common.shmem_base + 11760 offsetof(struct shmem_region, func_mb) + 11761 E1H_FUNC_MAX * sizeof(struct drv_func_mb); 11762 /* 11763 * get mf configuration: 11764 * 1. Existence of MF configuration 11765 * 2. MAC address must be legal (check only upper bytes) 11766 * for Switch-Independent mode; 11767 * OVLAN must be legal for Switch-Dependent mode 11768 * 3. SF_MODE configures specific MF mode 11769 */ 11770 if (bp->common.mf_cfg_base != SHMEM_MF_CFG_ADDR_NONE) { 11771 /* get mf configuration */ 11772 val = SHMEM_RD(bp, 11773 dev_info.shared_feature_config.config); 11774 val &= SHARED_FEAT_CFG_FORCE_SF_MODE_MASK; 11775 11776 switch (val) { 11777 case SHARED_FEAT_CFG_FORCE_SF_MODE_SWITCH_INDEPT: 11778 validate_set_si_mode(bp); 11779 break; 11780 case SHARED_FEAT_CFG_FORCE_SF_MODE_AFEX_MODE: 11781 if ((!CHIP_IS_E1x(bp)) && 11782 (MF_CFG_RD(bp, func_mf_config[func]. 11783 mac_upper) != 0xffff) && 11784 (SHMEM2_HAS(bp, 11785 afex_driver_support))) { 11786 bp->mf_mode = MULTI_FUNCTION_AFEX; 11787 bp->mf_config[vn] = MF_CFG_RD(bp, 11788 func_mf_config[func].config); 11789 } else { 11790 BNX2X_DEV_INFO("can not configure afex mode\n"); 11791 } 11792 break; 11793 case SHARED_FEAT_CFG_FORCE_SF_MODE_MF_ALLOWED: 11794 /* get OV configuration */ 11795 val = MF_CFG_RD(bp, 11796 func_mf_config[FUNC_0].e1hov_tag); 11797 val &= FUNC_MF_CFG_E1HOV_TAG_MASK; 11798 11799 if (val != FUNC_MF_CFG_E1HOV_TAG_DEFAULT) { 11800 bp->mf_mode = MULTI_FUNCTION_SD; 11801 bp->mf_config[vn] = MF_CFG_RD(bp, 11802 func_mf_config[func].config); 11803 } else 11804 BNX2X_DEV_INFO("illegal OV for SD\n"); 11805 break; 11806 case SHARED_FEAT_CFG_FORCE_SF_MODE_UFP_MODE: 11807 bp->mf_mode = MULTI_FUNCTION_SD; 11808 bp->mf_sub_mode = SUB_MF_MODE_UFP; 11809 bp->mf_config[vn] = 11810 MF_CFG_RD(bp, 11811 func_mf_config[func].config); 11812 break; 11813 case SHARED_FEAT_CFG_FORCE_SF_MODE_FORCED_SF: 11814 bp->mf_config[vn] = 0; 11815 break; 11816 case SHARED_FEAT_CFG_FORCE_SF_MODE_EXTENDED_MODE: 11817 val2 = SHMEM_RD(bp, 11818 dev_info.shared_hw_config.config_3); 11819 val2 &= SHARED_HW_CFG_EXTENDED_MF_MODE_MASK; 11820 switch (val2) { 11821 case SHARED_HW_CFG_EXTENDED_MF_MODE_NPAR1_DOT_5: 11822 validate_set_si_mode(bp); 11823 bp->mf_sub_mode = 11824 SUB_MF_MODE_NPAR1_DOT_5; 11825 break; 11826 default: 11827 /* Unknown configuration */ 11828 bp->mf_config[vn] = 0; 11829 BNX2X_DEV_INFO("unknown extended MF mode 0x%x\n", 11830 val); 11831 } 11832 break; 11833 default: 11834 /* Unknown configuration: reset mf_config */ 11835 bp->mf_config[vn] = 0; 11836 BNX2X_DEV_INFO("unknown MF mode 0x%x\n", val); 11837 } 11838 } 11839 11840 BNX2X_DEV_INFO("%s function mode\n", 11841 IS_MF(bp) ? "multi" : "single"); 11842 11843 switch (bp->mf_mode) { 11844 case MULTI_FUNCTION_SD: 11845 val = MF_CFG_RD(bp, func_mf_config[func].e1hov_tag) & 11846 FUNC_MF_CFG_E1HOV_TAG_MASK; 11847 if (val != FUNC_MF_CFG_E1HOV_TAG_DEFAULT) { 11848 bp->mf_ov = val; 11849 bp->path_has_ovlan = true; 11850 11851 BNX2X_DEV_INFO("MF OV for func %d is %d (0x%04x)\n", 11852 func, bp->mf_ov, bp->mf_ov); 11853 } else if (bp->mf_sub_mode == SUB_MF_MODE_UFP) { 11854 dev_err(&bp->pdev->dev, 11855 "Unexpected - no valid MF OV for func %d in UFP mode\n", 11856 func); 11857 bp->path_has_ovlan = true; 11858 } else { 11859 dev_err(&bp->pdev->dev, 11860 "No valid MF OV for func %d, aborting\n", 11861 func); 11862 return -EPERM; 11863 } 11864 break; 11865 case MULTI_FUNCTION_AFEX: 11866 BNX2X_DEV_INFO("func %d is in MF afex mode\n", func); 11867 break; 11868 case MULTI_FUNCTION_SI: 11869 BNX2X_DEV_INFO("func %d is in MF switch-independent mode\n", 11870 func); 11871 break; 11872 default: 11873 if (vn) { 11874 dev_err(&bp->pdev->dev, 11875 "VN %d is in a single function mode, aborting\n", 11876 vn); 11877 return -EPERM; 11878 } 11879 break; 11880 } 11881 11882 /* check if other port on the path needs ovlan: 11883 * Since MF configuration is shared between ports 11884 * Possible mixed modes are only 11885 * {SF, SI} {SF, SD} {SD, SF} {SI, SF} 11886 */ 11887 if (CHIP_MODE_IS_4_PORT(bp) && 11888 !bp->path_has_ovlan && 11889 !IS_MF(bp) && 11890 bp->common.mf_cfg_base != SHMEM_MF_CFG_ADDR_NONE) { 11891 u8 other_port = !BP_PORT(bp); 11892 u8 other_func = BP_PATH(bp) + 2*other_port; 11893 val = MF_CFG_RD(bp, 11894 func_mf_config[other_func].e1hov_tag); 11895 if (val != FUNC_MF_CFG_E1HOV_TAG_DEFAULT) 11896 bp->path_has_ovlan = true; 11897 } 11898 } 11899 11900 /* adjust igu_sb_cnt to MF for E1H */ 11901 if (CHIP_IS_E1H(bp) && IS_MF(bp)) 11902 bp->igu_sb_cnt = min_t(u8, bp->igu_sb_cnt, E1H_MAX_MF_SB_COUNT); 11903 11904 /* port info */ 11905 bnx2x_get_port_hwinfo(bp); 11906 11907 /* Get MAC addresses */ 11908 bnx2x_get_mac_hwinfo(bp); 11909 11910 bnx2x_get_cnic_info(bp); 11911 11912 return rc; 11913} 11914 11915static void bnx2x_read_fwinfo(struct bnx2x *bp) 11916{ 11917 int cnt, i, block_end, rodi; 11918 char vpd_start[BNX2X_VPD_LEN+1]; 11919 char str_id_reg[VENDOR_ID_LEN+1]; 11920 char str_id_cap[VENDOR_ID_LEN+1]; 11921 char *vpd_data; 11922 char *vpd_extended_data = NULL; 11923 u8 len; 11924 11925 cnt = pci_read_vpd(bp->pdev, 0, BNX2X_VPD_LEN, vpd_start); 11926 memset(bp->fw_ver, 0, sizeof(bp->fw_ver)); 11927 11928 if (cnt < BNX2X_VPD_LEN) 11929 goto out_not_found; 11930 11931 /* VPD RO tag should be first tag after identifier string, hence 11932 * we should be able to find it in first BNX2X_VPD_LEN chars 11933 */ 11934 i = pci_vpd_find_tag(vpd_start, 0, BNX2X_VPD_LEN, 11935 PCI_VPD_LRDT_RO_DATA); 11936 if (i < 0) 11937 goto out_not_found; 11938 11939 block_end = i + PCI_VPD_LRDT_TAG_SIZE + 11940 pci_vpd_lrdt_size(&vpd_start[i]); 11941 11942 i += PCI_VPD_LRDT_TAG_SIZE; 11943 11944 if (block_end > BNX2X_VPD_LEN) { 11945 vpd_extended_data = kmalloc(block_end, GFP_KERNEL); 11946 if (vpd_extended_data == NULL) 11947 goto out_not_found; 11948 11949 /* read rest of vpd image into vpd_extended_data */ 11950 memcpy(vpd_extended_data, vpd_start, BNX2X_VPD_LEN); 11951 cnt = pci_read_vpd(bp->pdev, BNX2X_VPD_LEN, 11952 block_end - BNX2X_VPD_LEN, 11953 vpd_extended_data + BNX2X_VPD_LEN); 11954 if (cnt < (block_end - BNX2X_VPD_LEN)) 11955 goto out_not_found; 11956 vpd_data = vpd_extended_data; 11957 } else 11958 vpd_data = vpd_start; 11959 11960 /* now vpd_data holds full vpd content in both cases */ 11961 11962 rodi = pci_vpd_find_info_keyword(vpd_data, i, block_end, 11963 PCI_VPD_RO_KEYWORD_MFR_ID); 11964 if (rodi < 0) 11965 goto out_not_found; 11966 11967 len = pci_vpd_info_field_size(&vpd_data[rodi]); 11968 11969 if (len != VENDOR_ID_LEN) 11970 goto out_not_found; 11971 11972 rodi += PCI_VPD_INFO_FLD_HDR_SIZE; 11973 11974 /* vendor specific info */ 11975 snprintf(str_id_reg, VENDOR_ID_LEN + 1, "%04x", PCI_VENDOR_ID_DELL); 11976 snprintf(str_id_cap, VENDOR_ID_LEN + 1, "%04X", PCI_VENDOR_ID_DELL); 11977 if (!strncmp(str_id_reg, &vpd_data[rodi], VENDOR_ID_LEN) || 11978 !strncmp(str_id_cap, &vpd_data[rodi], VENDOR_ID_LEN)) { 11979 11980 rodi = pci_vpd_find_info_keyword(vpd_data, i, block_end, 11981 PCI_VPD_RO_KEYWORD_VENDOR0); 11982 if (rodi >= 0) { 11983 len = pci_vpd_info_field_size(&vpd_data[rodi]); 11984 11985 rodi += PCI_VPD_INFO_FLD_HDR_SIZE; 11986 11987 if (len < 32 && (len + rodi) <= BNX2X_VPD_LEN) { 11988 memcpy(bp->fw_ver, &vpd_data[rodi], len); 11989 bp->fw_ver[len] = ' '; 11990 } 11991 } 11992 kfree(vpd_extended_data); 11993 return; 11994 } 11995out_not_found: 11996 kfree(vpd_extended_data); 11997 return; 11998} 11999 12000static void bnx2x_set_modes_bitmap(struct bnx2x *bp) 12001{ 12002 u32 flags = 0; 12003 12004 if (CHIP_REV_IS_FPGA(bp)) 12005 SET_FLAGS(flags, MODE_FPGA); 12006 else if (CHIP_REV_IS_EMUL(bp)) 12007 SET_FLAGS(flags, MODE_EMUL); 12008 else 12009 SET_FLAGS(flags, MODE_ASIC); 12010 12011 if (CHIP_MODE_IS_4_PORT(bp)) 12012 SET_FLAGS(flags, MODE_PORT4); 12013 else 12014 SET_FLAGS(flags, MODE_PORT2); 12015 12016 if (CHIP_IS_E2(bp)) 12017 SET_FLAGS(flags, MODE_E2); 12018 else if (CHIP_IS_E3(bp)) { 12019 SET_FLAGS(flags, MODE_E3); 12020 if (CHIP_REV(bp) == CHIP_REV_Ax) 12021 SET_FLAGS(flags, MODE_E3_A0); 12022 else /*if (CHIP_REV(bp) == CHIP_REV_Bx)*/ 12023 SET_FLAGS(flags, MODE_E3_B0 | MODE_COS3); 12024 } 12025 12026 if (IS_MF(bp)) { 12027 SET_FLAGS(flags, MODE_MF); 12028 switch (bp->mf_mode) { 12029 case MULTI_FUNCTION_SD: 12030 SET_FLAGS(flags, MODE_MF_SD); 12031 break; 12032 case MULTI_FUNCTION_SI: 12033 SET_FLAGS(flags, MODE_MF_SI); 12034 break; 12035 case MULTI_FUNCTION_AFEX: 12036 SET_FLAGS(flags, MODE_MF_AFEX); 12037 break; 12038 } 12039 } else 12040 SET_FLAGS(flags, MODE_SF); 12041 12042#if defined(__LITTLE_ENDIAN) 12043 SET_FLAGS(flags, MODE_LITTLE_ENDIAN); 12044#else /*(__BIG_ENDIAN)*/ 12045 SET_FLAGS(flags, MODE_BIG_ENDIAN); 12046#endif 12047 INIT_MODE_FLAGS(bp) = flags; 12048} 12049 12050static int bnx2x_init_bp(struct bnx2x *bp) 12051{ 12052 int func; 12053 int rc; 12054 12055 mutex_init(&bp->port.phy_mutex); 12056 mutex_init(&bp->fw_mb_mutex); 12057 mutex_init(&bp->drv_info_mutex); 12058 sema_init(&bp->stats_lock, 1); 12059 bp->drv_info_mng_owner = false; 12060 12061 INIT_DELAYED_WORK(&bp->sp_task, bnx2x_sp_task); 12062 INIT_DELAYED_WORK(&bp->sp_rtnl_task, bnx2x_sp_rtnl_task); 12063 INIT_DELAYED_WORK(&bp->period_task, bnx2x_period_task); 12064 INIT_DELAYED_WORK(&bp->iov_task, bnx2x_iov_task); 12065 if (IS_PF(bp)) { 12066 rc = bnx2x_get_hwinfo(bp); 12067 if (rc) 12068 return rc; 12069 } else { 12070 eth_zero_addr(bp->dev->dev_addr); 12071 } 12072 12073 bnx2x_set_modes_bitmap(bp); 12074 12075 rc = bnx2x_alloc_mem_bp(bp); 12076 if (rc) 12077 return rc; 12078 12079 bnx2x_read_fwinfo(bp); 12080 12081 func = BP_FUNC(bp); 12082 12083 /* need to reset chip if undi was active */ 12084 if (IS_PF(bp) && !BP_NOMCP(bp)) { 12085 /* init fw_seq */ 12086 bp->fw_seq = 12087 SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_mb_header) & 12088 DRV_MSG_SEQ_NUMBER_MASK; 12089 BNX2X_DEV_INFO("fw_seq 0x%08x\n", bp->fw_seq); 12090 12091 rc = bnx2x_prev_unload(bp); 12092 if (rc) { 12093 bnx2x_free_mem_bp(bp); 12094 return rc; 12095 } 12096 } 12097 12098 if (CHIP_REV_IS_FPGA(bp)) 12099 dev_err(&bp->pdev->dev, "FPGA detected\n"); 12100 12101 if (BP_NOMCP(bp) && (func == 0)) 12102 dev_err(&bp->pdev->dev, "MCP disabled, must load devices in order!\n"); 12103 12104 bp->disable_tpa = disable_tpa; 12105 bp->disable_tpa |= !!IS_MF_STORAGE_ONLY(bp); 12106 /* Reduce memory usage in kdump environment by disabling TPA */ 12107 bp->disable_tpa |= is_kdump_kernel(); 12108 12109 /* Set TPA flags */ 12110 if (bp->disable_tpa) { 12111 bp->dev->hw_features &= ~NETIF_F_LRO; 12112 bp->dev->features &= ~NETIF_F_LRO; 12113 } 12114 12115 if (CHIP_IS_E1(bp)) 12116 bp->dropless_fc = 0; 12117 else 12118 bp->dropless_fc = dropless_fc | bnx2x_get_dropless_info(bp); 12119 12120 bp->mrrs = mrrs; 12121 12122 bp->tx_ring_size = IS_MF_STORAGE_ONLY(bp) ? 0 : MAX_TX_AVAIL; 12123 if (IS_VF(bp)) 12124 bp->rx_ring_size = MAX_RX_AVAIL; 12125 12126 /* make sure that the numbers are in the right granularity */ 12127 bp->tx_ticks = (50 / BNX2X_BTR) * BNX2X_BTR; 12128 bp->rx_ticks = (25 / BNX2X_BTR) * BNX2X_BTR; 12129 12130 bp->current_interval = CHIP_REV_IS_SLOW(bp) ? 5*HZ : HZ; 12131 12132 init_timer(&bp->timer); 12133 bp->timer.expires = jiffies + bp->current_interval; 12134 bp->timer.data = (unsigned long) bp; 12135 bp->timer.function = bnx2x_timer; 12136 12137 if (SHMEM2_HAS(bp, dcbx_lldp_params_offset) && 12138 SHMEM2_HAS(bp, dcbx_lldp_dcbx_stat_offset) && 12139 SHMEM2_RD(bp, dcbx_lldp_params_offset) && 12140 SHMEM2_RD(bp, dcbx_lldp_dcbx_stat_offset)) { 12141 bnx2x_dcbx_set_state(bp, true, BNX2X_DCBX_ENABLED_ON_NEG_ON); 12142 bnx2x_dcbx_init_params(bp); 12143 } else { 12144 bnx2x_dcbx_set_state(bp, false, BNX2X_DCBX_ENABLED_OFF); 12145 } 12146 12147 if (CHIP_IS_E1x(bp)) 12148 bp->cnic_base_cl_id = FP_SB_MAX_E1x; 12149 else 12150 bp->cnic_base_cl_id = FP_SB_MAX_E2; 12151 12152 /* multiple tx priority */ 12153 if (IS_VF(bp)) 12154 bp->max_cos = 1; 12155 else if (CHIP_IS_E1x(bp)) 12156 bp->max_cos = BNX2X_MULTI_TX_COS_E1X; 12157 else if (CHIP_IS_E2(bp) || CHIP_IS_E3A0(bp)) 12158 bp->max_cos = BNX2X_MULTI_TX_COS_E2_E3A0; 12159 else if (CHIP_IS_E3B0(bp)) 12160 bp->max_cos = BNX2X_MULTI_TX_COS_E3B0; 12161 else 12162 BNX2X_ERR("unknown chip %x revision %x\n", 12163 CHIP_NUM(bp), CHIP_REV(bp)); 12164 BNX2X_DEV_INFO("set bp->max_cos to %d\n", bp->max_cos); 12165 12166 /* We need at least one default status block for slow-path events, 12167 * second status block for the L2 queue, and a third status block for 12168 * CNIC if supported. 12169 */ 12170 if (IS_VF(bp)) 12171 bp->min_msix_vec_cnt = 1; 12172 else if (CNIC_SUPPORT(bp)) 12173 bp->min_msix_vec_cnt = 3; 12174 else /* PF w/o cnic */ 12175 bp->min_msix_vec_cnt = 2; 12176 BNX2X_DEV_INFO("bp->min_msix_vec_cnt %d", bp->min_msix_vec_cnt); 12177 12178 bp->dump_preset_idx = 1; 12179 12180 if (CHIP_IS_E3B0(bp)) 12181 bp->flags |= PTP_SUPPORTED; 12182 12183 return rc; 12184} 12185 12186/**************************************************************************** 12187* General service functions 12188****************************************************************************/ 12189 12190/* 12191 * net_device service functions 12192 */ 12193 12194/* called with rtnl_lock */ 12195static int bnx2x_open(struct net_device *dev) 12196{ 12197 struct bnx2x *bp = netdev_priv(dev); 12198 int rc; 12199 12200 bp->stats_init = true; 12201 12202 netif_carrier_off(dev); 12203 12204 bnx2x_set_power_state(bp, PCI_D0); 12205 12206 /* If parity had happen during the unload, then attentions 12207 * and/or RECOVERY_IN_PROGRES may still be set. In this case we 12208 * want the first function loaded on the current engine to 12209 * complete the recovery. 12210 * Parity recovery is only relevant for PF driver. 12211 */ 12212 if (IS_PF(bp)) { 12213 int other_engine = BP_PATH(bp) ? 0 : 1; 12214 bool other_load_status, load_status; 12215 bool global = false; 12216 12217 other_load_status = bnx2x_get_load_status(bp, other_engine); 12218 load_status = bnx2x_get_load_status(bp, BP_PATH(bp)); 12219 if (!bnx2x_reset_is_done(bp, BP_PATH(bp)) || 12220 bnx2x_chk_parity_attn(bp, &global, true)) { 12221 do { 12222 /* If there are attentions and they are in a 12223 * global blocks, set the GLOBAL_RESET bit 12224 * regardless whether it will be this function 12225 * that will complete the recovery or not. 12226 */ 12227 if (global) 12228 bnx2x_set_reset_global(bp); 12229 12230 /* Only the first function on the current 12231 * engine should try to recover in open. In case 12232 * of attentions in global blocks only the first 12233 * in the chip should try to recover. 12234 */ 12235 if ((!load_status && 12236 (!global || !other_load_status)) && 12237 bnx2x_trylock_leader_lock(bp) && 12238 !bnx2x_leader_reset(bp)) { 12239 netdev_info(bp->dev, 12240 "Recovered in open\n"); 12241 break; 12242 } 12243 12244 /* recovery has failed... */ 12245 bnx2x_set_power_state(bp, PCI_D3hot); 12246 bp->recovery_state = BNX2X_RECOVERY_FAILED; 12247 12248 BNX2X_ERR("Recovery flow hasn't been properly completed yet. Try again later.\n" 12249 "If you still see this message after a few retries then power cycle is required.\n"); 12250 12251 return -EAGAIN; 12252 } while (0); 12253 } 12254 } 12255 12256 bp->recovery_state = BNX2X_RECOVERY_DONE; 12257 rc = bnx2x_nic_load(bp, LOAD_OPEN); 12258 if (rc) 12259 return rc; 12260 return 0; 12261} 12262 12263/* called with rtnl_lock */ 12264static int bnx2x_close(struct net_device *dev) 12265{ 12266 struct bnx2x *bp = netdev_priv(dev); 12267 12268 /* Unload the driver, release IRQs */ 12269 bnx2x_nic_unload(bp, UNLOAD_CLOSE, false); 12270 12271 return 0; 12272} 12273 12274static int bnx2x_init_mcast_macs_list(struct bnx2x *bp, 12275 struct bnx2x_mcast_ramrod_params *p) 12276{ 12277 int mc_count = netdev_mc_count(bp->dev); 12278 struct bnx2x_mcast_list_elem *mc_mac = 12279 kcalloc(mc_count, sizeof(*mc_mac), GFP_ATOMIC); 12280 struct netdev_hw_addr *ha; 12281 12282 if (!mc_mac) 12283 return -ENOMEM; 12284 12285 INIT_LIST_HEAD(&p->mcast_list); 12286 12287 netdev_for_each_mc_addr(ha, bp->dev) { 12288 mc_mac->mac = bnx2x_mc_addr(ha); 12289 list_add_tail(&mc_mac->link, &p->mcast_list); 12290 mc_mac++; 12291 } 12292 12293 p->mcast_list_len = mc_count; 12294 12295 return 0; 12296} 12297 12298static void bnx2x_free_mcast_macs_list( 12299 struct bnx2x_mcast_ramrod_params *p) 12300{ 12301 struct bnx2x_mcast_list_elem *mc_mac = 12302 list_first_entry(&p->mcast_list, struct bnx2x_mcast_list_elem, 12303 link); 12304 12305 WARN_ON(!mc_mac); 12306 kfree(mc_mac); 12307} 12308 12309/** 12310 * bnx2x_set_uc_list - configure a new unicast MACs list. 12311 * 12312 * @bp: driver handle 12313 * 12314 * We will use zero (0) as a MAC type for these MACs. 12315 */ 12316static int bnx2x_set_uc_list(struct bnx2x *bp) 12317{ 12318 int rc; 12319 struct net_device *dev = bp->dev; 12320 struct netdev_hw_addr *ha; 12321 struct bnx2x_vlan_mac_obj *mac_obj = &bp->sp_objs->mac_obj; 12322 unsigned long ramrod_flags = 0; 12323 12324 /* First schedule a cleanup up of old configuration */ 12325 rc = bnx2x_del_all_macs(bp, mac_obj, BNX2X_UC_LIST_MAC, false); 12326 if (rc < 0) { 12327 BNX2X_ERR("Failed to schedule DELETE operations: %d\n", rc); 12328 return rc; 12329 } 12330 12331 netdev_for_each_uc_addr(ha, dev) { 12332 rc = bnx2x_set_mac_one(bp, bnx2x_uc_addr(ha), mac_obj, true, 12333 BNX2X_UC_LIST_MAC, &ramrod_flags); 12334 if (rc == -EEXIST) { 12335 DP(BNX2X_MSG_SP, 12336 "Failed to schedule ADD operations: %d\n", rc); 12337 /* do not treat adding same MAC as error */ 12338 rc = 0; 12339 12340 } else if (rc < 0) { 12341 12342 BNX2X_ERR("Failed to schedule ADD operations: %d\n", 12343 rc); 12344 return rc; 12345 } 12346 } 12347 12348 /* Execute the pending commands */ 12349 __set_bit(RAMROD_CONT, &ramrod_flags); 12350 return bnx2x_set_mac_one(bp, NULL, mac_obj, false /* don't care */, 12351 BNX2X_UC_LIST_MAC, &ramrod_flags); 12352} 12353 12354static int bnx2x_set_mc_list(struct bnx2x *bp) 12355{ 12356 struct net_device *dev = bp->dev; 12357 struct bnx2x_mcast_ramrod_params rparam = {NULL}; 12358 int rc = 0; 12359 12360 rparam.mcast_obj = &bp->mcast_obj; 12361 12362 /* first, clear all configured multicast MACs */ 12363 rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_DEL); 12364 if (rc < 0) { 12365 BNX2X_ERR("Failed to clear multicast configuration: %d\n", rc); 12366 return rc; 12367 } 12368 12369 /* then, configure a new MACs list */ 12370 if (netdev_mc_count(dev)) { 12371 rc = bnx2x_init_mcast_macs_list(bp, &rparam); 12372 if (rc) { 12373 BNX2X_ERR("Failed to create multicast MACs list: %d\n", 12374 rc); 12375 return rc; 12376 } 12377 12378 /* Now add the new MACs */ 12379 rc = bnx2x_config_mcast(bp, &rparam, 12380 BNX2X_MCAST_CMD_ADD); 12381 if (rc < 0) 12382 BNX2X_ERR("Failed to set a new multicast configuration: %d\n", 12383 rc); 12384 12385 bnx2x_free_mcast_macs_list(&rparam); 12386 } 12387 12388 return rc; 12389} 12390 12391/* If bp->state is OPEN, should be called with netif_addr_lock_bh() */ 12392static void bnx2x_set_rx_mode(struct net_device *dev) 12393{ 12394 struct bnx2x *bp = netdev_priv(dev); 12395 12396 if (bp->state != BNX2X_STATE_OPEN) { 12397 DP(NETIF_MSG_IFUP, "state is %x, returning\n", bp->state); 12398 return; 12399 } else { 12400 /* Schedule an SP task to handle rest of change */ 12401 bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_RX_MODE, 12402 NETIF_MSG_IFUP); 12403 } 12404} 12405 12406void bnx2x_set_rx_mode_inner(struct bnx2x *bp) 12407{ 12408 u32 rx_mode = BNX2X_RX_MODE_NORMAL; 12409 12410 DP(NETIF_MSG_IFUP, "dev->flags = %x\n", bp->dev->flags); 12411 12412 netif_addr_lock_bh(bp->dev); 12413 12414 if (bp->dev->flags & IFF_PROMISC) { 12415 rx_mode = BNX2X_RX_MODE_PROMISC; 12416 } else if ((bp->dev->flags & IFF_ALLMULTI) || 12417 ((netdev_mc_count(bp->dev) > BNX2X_MAX_MULTICAST) && 12418 CHIP_IS_E1(bp))) { 12419 rx_mode = BNX2X_RX_MODE_ALLMULTI; 12420 } else { 12421 if (IS_PF(bp)) { 12422 /* some multicasts */ 12423 if (bnx2x_set_mc_list(bp) < 0) 12424 rx_mode = BNX2X_RX_MODE_ALLMULTI; 12425 12426 /* release bh lock, as bnx2x_set_uc_list might sleep */ 12427 netif_addr_unlock_bh(bp->dev); 12428 if (bnx2x_set_uc_list(bp) < 0) 12429 rx_mode = BNX2X_RX_MODE_PROMISC; 12430 netif_addr_lock_bh(bp->dev); 12431 } else { 12432 /* configuring mcast to a vf involves sleeping (when we 12433 * wait for the pf's response). 12434 */ 12435 bnx2x_schedule_sp_rtnl(bp, 12436 BNX2X_SP_RTNL_VFPF_MCAST, 0); 12437 } 12438 } 12439 12440 bp->rx_mode = rx_mode; 12441 /* handle ISCSI SD mode */ 12442 if (IS_MF_ISCSI_ONLY(bp)) 12443 bp->rx_mode = BNX2X_RX_MODE_NONE; 12444 12445 /* Schedule the rx_mode command */ 12446 if (test_bit(BNX2X_FILTER_RX_MODE_PENDING, &bp->sp_state)) { 12447 set_bit(BNX2X_FILTER_RX_MODE_SCHED, &bp->sp_state); 12448 netif_addr_unlock_bh(bp->dev); 12449 return; 12450 } 12451 12452 if (IS_PF(bp)) { 12453 bnx2x_set_storm_rx_mode(bp); 12454 netif_addr_unlock_bh(bp->dev); 12455 } else { 12456 /* VF will need to request the PF to make this change, and so 12457 * the VF needs to release the bottom-half lock prior to the 12458 * request (as it will likely require sleep on the VF side) 12459 */ 12460 netif_addr_unlock_bh(bp->dev); 12461 bnx2x_vfpf_storm_rx_mode(bp); 12462 } 12463} 12464 12465/* called with rtnl_lock */ 12466static int bnx2x_mdio_read(struct net_device *netdev, int prtad, 12467 int devad, u16 addr) 12468{ 12469 struct bnx2x *bp = netdev_priv(netdev); 12470 u16 value; 12471 int rc; 12472 12473 DP(NETIF_MSG_LINK, "mdio_read: prtad 0x%x, devad 0x%x, addr 0x%x\n", 12474 prtad, devad, addr); 12475 12476 /* The HW expects different devad if CL22 is used */ 12477 devad = (devad == MDIO_DEVAD_NONE) ? DEFAULT_PHY_DEV_ADDR : devad; 12478 12479 bnx2x_acquire_phy_lock(bp); 12480 rc = bnx2x_phy_read(&bp->link_params, prtad, devad, addr, &value); 12481 bnx2x_release_phy_lock(bp); 12482 DP(NETIF_MSG_LINK, "mdio_read_val 0x%x rc = 0x%x\n", value, rc); 12483 12484 if (!rc) 12485 rc = value; 12486 return rc; 12487} 12488 12489/* called with rtnl_lock */ 12490static int bnx2x_mdio_write(struct net_device *netdev, int prtad, int devad, 12491 u16 addr, u16 value) 12492{ 12493 struct bnx2x *bp = netdev_priv(netdev); 12494 int rc; 12495 12496 DP(NETIF_MSG_LINK, 12497 "mdio_write: prtad 0x%x, devad 0x%x, addr 0x%x, value 0x%x\n", 12498 prtad, devad, addr, value); 12499 12500 /* The HW expects different devad if CL22 is used */ 12501 devad = (devad == MDIO_DEVAD_NONE) ? DEFAULT_PHY_DEV_ADDR : devad; 12502 12503 bnx2x_acquire_phy_lock(bp); 12504 rc = bnx2x_phy_write(&bp->link_params, prtad, devad, addr, value); 12505 bnx2x_release_phy_lock(bp); 12506 return rc; 12507} 12508 12509/* called with rtnl_lock */ 12510static int bnx2x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) 12511{ 12512 struct bnx2x *bp = netdev_priv(dev); 12513 struct mii_ioctl_data *mdio = if_mii(ifr); 12514 12515 if (!netif_running(dev)) 12516 return -EAGAIN; 12517 12518 switch (cmd) { 12519 case SIOCSHWTSTAMP: 12520 return bnx2x_hwtstamp_ioctl(bp, ifr); 12521 default: 12522 DP(NETIF_MSG_LINK, "ioctl: phy id 0x%x, reg 0x%x, val_in 0x%x\n", 12523 mdio->phy_id, mdio->reg_num, mdio->val_in); 12524 return mdio_mii_ioctl(&bp->mdio, mdio, cmd); 12525 } 12526} 12527 12528#ifdef CONFIG_NET_POLL_CONTROLLER 12529static void poll_bnx2x(struct net_device *dev) 12530{ 12531 struct bnx2x *bp = netdev_priv(dev); 12532 int i; 12533 12534 for_each_eth_queue(bp, i) { 12535 struct bnx2x_fastpath *fp = &bp->fp[i]; 12536 napi_schedule(&bnx2x_fp(bp, fp->index, napi)); 12537 } 12538} 12539#endif 12540 12541static int bnx2x_validate_addr(struct net_device *dev) 12542{ 12543 struct bnx2x *bp = netdev_priv(dev); 12544 12545 /* query the bulletin board for mac address configured by the PF */ 12546 if (IS_VF(bp)) 12547 bnx2x_sample_bulletin(bp); 12548 12549 if (!is_valid_ether_addr(dev->dev_addr)) { 12550 BNX2X_ERR("Non-valid Ethernet address\n"); 12551 return -EADDRNOTAVAIL; 12552 } 12553 return 0; 12554} 12555 12556static int bnx2x_get_phys_port_id(struct net_device *netdev, 12557 struct netdev_phys_item_id *ppid) 12558{ 12559 struct bnx2x *bp = netdev_priv(netdev); 12560 12561 if (!(bp->flags & HAS_PHYS_PORT_ID)) 12562 return -EOPNOTSUPP; 12563 12564 ppid->id_len = sizeof(bp->phys_port_id); 12565 memcpy(ppid->id, bp->phys_port_id, ppid->id_len); 12566 12567 return 0; 12568} 12569 12570static netdev_features_t bnx2x_features_check(struct sk_buff *skb, 12571 struct net_device *dev, 12572 netdev_features_t features) 12573{ 12574 features = vlan_features_check(skb, features); 12575 return vxlan_features_check(skb, features); 12576} 12577 12578static const struct net_device_ops bnx2x_netdev_ops = { 12579 .ndo_open = bnx2x_open, 12580 .ndo_stop = bnx2x_close, 12581 .ndo_start_xmit = bnx2x_start_xmit, 12582 .ndo_select_queue = bnx2x_select_queue, 12583 .ndo_set_rx_mode = bnx2x_set_rx_mode, 12584 .ndo_set_mac_address = bnx2x_change_mac_addr, 12585 .ndo_validate_addr = bnx2x_validate_addr, 12586 .ndo_do_ioctl = bnx2x_ioctl, 12587 .ndo_change_mtu = bnx2x_change_mtu, 12588 .ndo_fix_features = bnx2x_fix_features, 12589 .ndo_set_features = bnx2x_set_features, 12590 .ndo_tx_timeout = bnx2x_tx_timeout, 12591#ifdef CONFIG_NET_POLL_CONTROLLER 12592 .ndo_poll_controller = poll_bnx2x, 12593#endif 12594 .ndo_setup_tc = bnx2x_setup_tc, 12595#ifdef CONFIG_BNX2X_SRIOV 12596 .ndo_set_vf_mac = bnx2x_set_vf_mac, 12597 .ndo_set_vf_vlan = bnx2x_set_vf_vlan, 12598 .ndo_get_vf_config = bnx2x_get_vf_config, 12599#endif 12600#ifdef NETDEV_FCOE_WWNN 12601 .ndo_fcoe_get_wwn = bnx2x_fcoe_get_wwn, 12602#endif 12603 12604#ifdef CONFIG_NET_RX_BUSY_POLL 12605 .ndo_busy_poll = bnx2x_low_latency_recv, 12606#endif 12607 .ndo_get_phys_port_id = bnx2x_get_phys_port_id, 12608 .ndo_set_vf_link_state = bnx2x_set_vf_link_state, 12609 .ndo_features_check = bnx2x_features_check, 12610}; 12611 12612static int bnx2x_set_coherency_mask(struct bnx2x *bp) 12613{ 12614 struct device *dev = &bp->pdev->dev; 12615 12616 if (dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64)) != 0 && 12617 dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32)) != 0) { 12618 dev_err(dev, "System does not support DMA, aborting\n"); 12619 return -EIO; 12620 } 12621 12622 return 0; 12623} 12624 12625static void bnx2x_disable_pcie_error_reporting(struct bnx2x *bp) 12626{ 12627 if (bp->flags & AER_ENABLED) { 12628 pci_disable_pcie_error_reporting(bp->pdev); 12629 bp->flags &= ~AER_ENABLED; 12630 } 12631} 12632 12633static int bnx2x_init_dev(struct bnx2x *bp, struct pci_dev *pdev, 12634 struct net_device *dev, unsigned long board_type) 12635{ 12636 int rc; 12637 u32 pci_cfg_dword; 12638 bool chip_is_e1x = (board_type == BCM57710 || 12639 board_type == BCM57711 || 12640 board_type == BCM57711E); 12641 12642 SET_NETDEV_DEV(dev, &pdev->dev); 12643 12644 bp->dev = dev; 12645 bp->pdev = pdev; 12646 12647 rc = pci_enable_device(pdev); 12648 if (rc) { 12649 dev_err(&bp->pdev->dev, 12650 "Cannot enable PCI device, aborting\n"); 12651 goto err_out; 12652 } 12653 12654 if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { 12655 dev_err(&bp->pdev->dev, 12656 "Cannot find PCI device base address, aborting\n"); 12657 rc = -ENODEV; 12658 goto err_out_disable; 12659 } 12660 12661 if (IS_PF(bp) && !(pci_resource_flags(pdev, 2) & IORESOURCE_MEM)) { 12662 dev_err(&bp->pdev->dev, "Cannot find second PCI device base address, aborting\n"); 12663 rc = -ENODEV; 12664 goto err_out_disable; 12665 } 12666 12667 pci_read_config_dword(pdev, PCICFG_REVISION_ID_OFFSET, &pci_cfg_dword); 12668 if ((pci_cfg_dword & PCICFG_REVESION_ID_MASK) == 12669 PCICFG_REVESION_ID_ERROR_VAL) { 12670 pr_err("PCI device error, probably due to fan failure, aborting\n"); 12671 rc = -ENODEV; 12672 goto err_out_disable; 12673 } 12674 12675 if (atomic_read(&pdev->enable_cnt) == 1) { 12676 rc = pci_request_regions(pdev, DRV_MODULE_NAME); 12677 if (rc) { 12678 dev_err(&bp->pdev->dev, 12679 "Cannot obtain PCI resources, aborting\n"); 12680 goto err_out_disable; 12681 } 12682 12683 pci_set_master(pdev); 12684 pci_save_state(pdev); 12685 } 12686 12687 if (IS_PF(bp)) { 12688 if (!pdev->pm_cap) { 12689 dev_err(&bp->pdev->dev, 12690 "Cannot find power management capability, aborting\n"); 12691 rc = -EIO; 12692 goto err_out_release; 12693 } 12694 } 12695 12696 if (!pci_is_pcie(pdev)) { 12697 dev_err(&bp->pdev->dev, "Not PCI Express, aborting\n"); 12698 rc = -EIO; 12699 goto err_out_release; 12700 } 12701 12702 rc = bnx2x_set_coherency_mask(bp); 12703 if (rc) 12704 goto err_out_release; 12705 12706 dev->mem_start = pci_resource_start(pdev, 0); 12707 dev->base_addr = dev->mem_start; 12708 dev->mem_end = pci_resource_end(pdev, 0); 12709 12710 dev->irq = pdev->irq; 12711 12712 bp->regview = pci_ioremap_bar(pdev, 0); 12713 if (!bp->regview) { 12714 dev_err(&bp->pdev->dev, 12715 "Cannot map register space, aborting\n"); 12716 rc = -ENOMEM; 12717 goto err_out_release; 12718 } 12719 12720 /* In E1/E1H use pci device function given by kernel. 12721 * In E2/E3 read physical function from ME register since these chips 12722 * support Physical Device Assignment where kernel BDF maybe arbitrary 12723 * (depending on hypervisor). 12724 */ 12725 if (chip_is_e1x) { 12726 bp->pf_num = PCI_FUNC(pdev->devfn); 12727 } else { 12728 /* chip is E2/3*/ 12729 pci_read_config_dword(bp->pdev, 12730 PCICFG_ME_REGISTER, &pci_cfg_dword); 12731 bp->pf_num = (u8)((pci_cfg_dword & ME_REG_ABS_PF_NUM) >> 12732 ME_REG_ABS_PF_NUM_SHIFT); 12733 } 12734 BNX2X_DEV_INFO("me reg PF num: %d\n", bp->pf_num); 12735 12736 /* clean indirect addresses */ 12737 pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS, 12738 PCICFG_VENDOR_ID_OFFSET); 12739 12740 /* Set PCIe reset type to fundamental for EEH recovery */ 12741 pdev->needs_freset = 1; 12742 12743 /* AER (Advanced Error reporting) configuration */ 12744 rc = pci_enable_pcie_error_reporting(pdev); 12745 if (!rc) 12746 bp->flags |= AER_ENABLED; 12747 else 12748 BNX2X_DEV_INFO("Failed To configure PCIe AER [%d]\n", rc); 12749 12750 /* 12751 * Clean the following indirect addresses for all functions since it 12752 * is not used by the driver. 12753 */ 12754 if (IS_PF(bp)) { 12755 REG_WR(bp, PXP2_REG_PGL_ADDR_88_F0, 0); 12756 REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F0, 0); 12757 REG_WR(bp, PXP2_REG_PGL_ADDR_90_F0, 0); 12758 REG_WR(bp, PXP2_REG_PGL_ADDR_94_F0, 0); 12759 12760 if (chip_is_e1x) { 12761 REG_WR(bp, PXP2_REG_PGL_ADDR_88_F1, 0); 12762 REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F1, 0); 12763 REG_WR(bp, PXP2_REG_PGL_ADDR_90_F1, 0); 12764 REG_WR(bp, PXP2_REG_PGL_ADDR_94_F1, 0); 12765 } 12766 12767 /* Enable internal target-read (in case we are probed after PF 12768 * FLR). Must be done prior to any BAR read access. Only for 12769 * 57712 and up 12770 */ 12771 if (!chip_is_e1x) 12772 REG_WR(bp, 12773 PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ, 1); 12774 } 12775 12776 dev->watchdog_timeo = TX_TIMEOUT; 12777 12778 dev->netdev_ops = &bnx2x_netdev_ops; 12779 bnx2x_set_ethtool_ops(bp, dev); 12780 12781 dev->priv_flags |= IFF_UNICAST_FLT; 12782 12783 dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | 12784 NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 | 12785 NETIF_F_RXCSUM | NETIF_F_LRO | NETIF_F_GRO | 12786 NETIF_F_RXHASH | NETIF_F_HW_VLAN_CTAG_TX; 12787 if (!chip_is_e1x) { 12788 dev->hw_features |= NETIF_F_GSO_GRE | NETIF_F_GSO_UDP_TUNNEL | 12789 NETIF_F_GSO_IPIP | NETIF_F_GSO_SIT; 12790 dev->hw_enc_features = 12791 NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | NETIF_F_SG | 12792 NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 | 12793 NETIF_F_GSO_IPIP | 12794 NETIF_F_GSO_SIT | 12795 NETIF_F_GSO_GRE | NETIF_F_GSO_UDP_TUNNEL; 12796 } 12797 12798 dev->vlan_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | 12799 NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 | NETIF_F_HIGHDMA; 12800 12801 dev->features |= dev->hw_features | NETIF_F_HW_VLAN_CTAG_RX; 12802 dev->features |= NETIF_F_HIGHDMA; 12803 12804 /* Add Loopback capability to the device */ 12805 dev->hw_features |= NETIF_F_LOOPBACK; 12806 12807#ifdef BCM_DCBNL 12808 dev->dcbnl_ops = &bnx2x_dcbnl_ops; 12809#endif 12810 12811 /* get_port_hwinfo() will set prtad and mmds properly */ 12812 bp->mdio.prtad = MDIO_PRTAD_NONE; 12813 bp->mdio.mmds = 0; 12814 bp->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22; 12815 bp->mdio.dev = dev; 12816 bp->mdio.mdio_read = bnx2x_mdio_read; 12817 bp->mdio.mdio_write = bnx2x_mdio_write; 12818 12819 return 0; 12820 12821err_out_release: 12822 if (atomic_read(&pdev->enable_cnt) == 1) 12823 pci_release_regions(pdev); 12824 12825err_out_disable: 12826 pci_disable_device(pdev); 12827 12828err_out: 12829 return rc; 12830} 12831 12832static int bnx2x_check_firmware(struct bnx2x *bp) 12833{ 12834 const struct firmware *firmware = bp->firmware; 12835 struct bnx2x_fw_file_hdr *fw_hdr; 12836 struct bnx2x_fw_file_section *sections; 12837 u32 offset, len, num_ops; 12838 __be16 *ops_offsets; 12839 int i; 12840 const u8 *fw_ver; 12841 12842 if (firmware->size < sizeof(struct bnx2x_fw_file_hdr)) { 12843 BNX2X_ERR("Wrong FW size\n"); 12844 return -EINVAL; 12845 } 12846 12847 fw_hdr = (struct bnx2x_fw_file_hdr *)firmware->data; 12848 sections = (struct bnx2x_fw_file_section *)fw_hdr; 12849 12850 /* Make sure none of the offsets and sizes make us read beyond 12851 * the end of the firmware data */ 12852 for (i = 0; i < sizeof(*fw_hdr) / sizeof(*sections); i++) { 12853 offset = be32_to_cpu(sections[i].offset); 12854 len = be32_to_cpu(sections[i].len); 12855 if (offset + len > firmware->size) { 12856 BNX2X_ERR("Section %d length is out of bounds\n", i); 12857 return -EINVAL; 12858 } 12859 } 12860 12861 /* Likewise for the init_ops offsets */ 12862 offset = be32_to_cpu(fw_hdr->init_ops_offsets.offset); 12863 ops_offsets = (__force __be16 *)(firmware->data + offset); 12864 num_ops = be32_to_cpu(fw_hdr->init_ops.len) / sizeof(struct raw_op); 12865 12866 for (i = 0; i < be32_to_cpu(fw_hdr->init_ops_offsets.len) / 2; i++) { 12867 if (be16_to_cpu(ops_offsets[i]) > num_ops) { 12868 BNX2X_ERR("Section offset %d is out of bounds\n", i); 12869 return -EINVAL; 12870 } 12871 } 12872 12873 /* Check FW version */ 12874 offset = be32_to_cpu(fw_hdr->fw_version.offset); 12875 fw_ver = firmware->data + offset; 12876 if ((fw_ver[0] != BCM_5710_FW_MAJOR_VERSION) || 12877 (fw_ver[1] != BCM_5710_FW_MINOR_VERSION) || 12878 (fw_ver[2] != BCM_5710_FW_REVISION_VERSION) || 12879 (fw_ver[3] != BCM_5710_FW_ENGINEERING_VERSION)) { 12880 BNX2X_ERR("Bad FW version:%d.%d.%d.%d. Should be %d.%d.%d.%d\n", 12881 fw_ver[0], fw_ver[1], fw_ver[2], fw_ver[3], 12882 BCM_5710_FW_MAJOR_VERSION, 12883 BCM_5710_FW_MINOR_VERSION, 12884 BCM_5710_FW_REVISION_VERSION, 12885 BCM_5710_FW_ENGINEERING_VERSION); 12886 return -EINVAL; 12887 } 12888 12889 return 0; 12890} 12891 12892static void be32_to_cpu_n(const u8 *_source, u8 *_target, u32 n) 12893{ 12894 const __be32 *source = (const __be32 *)_source; 12895 u32 *target = (u32 *)_target; 12896 u32 i; 12897 12898 for (i = 0; i < n/4; i++) 12899 target[i] = be32_to_cpu(source[i]); 12900} 12901 12902/* 12903 Ops array is stored in the following format: 12904 {op(8bit), offset(24bit, big endian), data(32bit, big endian)} 12905 */ 12906static void bnx2x_prep_ops(const u8 *_source, u8 *_target, u32 n) 12907{ 12908 const __be32 *source = (const __be32 *)_source; 12909 struct raw_op *target = (struct raw_op *)_target; 12910 u32 i, j, tmp; 12911 12912 for (i = 0, j = 0; i < n/8; i++, j += 2) { 12913 tmp = be32_to_cpu(source[j]); 12914 target[i].op = (tmp >> 24) & 0xff; 12915 target[i].offset = tmp & 0xffffff; 12916 target[i].raw_data = be32_to_cpu(source[j + 1]); 12917 } 12918} 12919 12920/* IRO array is stored in the following format: 12921 * {base(24bit), m1(16bit), m2(16bit), m3(16bit), size(16bit) } 12922 */ 12923static void bnx2x_prep_iro(const u8 *_source, u8 *_target, u32 n) 12924{ 12925 const __be32 *source = (const __be32 *)_source; 12926 struct iro *target = (struct iro *)_target; 12927 u32 i, j, tmp; 12928 12929 for (i = 0, j = 0; i < n/sizeof(struct iro); i++) { 12930 target[i].base = be32_to_cpu(source[j]); 12931 j++; 12932 tmp = be32_to_cpu(source[j]); 12933 target[i].m1 = (tmp >> 16) & 0xffff; 12934 target[i].m2 = tmp & 0xffff; 12935 j++; 12936 tmp = be32_to_cpu(source[j]); 12937 target[i].m3 = (tmp >> 16) & 0xffff; 12938 target[i].size = tmp & 0xffff; 12939 j++; 12940 } 12941} 12942 12943static void be16_to_cpu_n(const u8 *_source, u8 *_target, u32 n) 12944{ 12945 const __be16 *source = (const __be16 *)_source; 12946 u16 *target = (u16 *)_target; 12947 u32 i; 12948 12949 for (i = 0; i < n/2; i++) 12950 target[i] = be16_to_cpu(source[i]); 12951} 12952 12953#define BNX2X_ALLOC_AND_SET(arr, lbl, func) \ 12954do { \ 12955 u32 len = be32_to_cpu(fw_hdr->arr.len); \ 12956 bp->arr = kmalloc(len, GFP_KERNEL); \ 12957 if (!bp->arr) \ 12958 goto lbl; \ 12959 func(bp->firmware->data + be32_to_cpu(fw_hdr->arr.offset), \ 12960 (u8 *)bp->arr, len); \ 12961} while (0) 12962 12963static int bnx2x_init_firmware(struct bnx2x *bp) 12964{ 12965 const char *fw_file_name; 12966 struct bnx2x_fw_file_hdr *fw_hdr; 12967 int rc; 12968 12969 if (bp->firmware) 12970 return 0; 12971 12972 if (CHIP_IS_E1(bp)) 12973 fw_file_name = FW_FILE_NAME_E1; 12974 else if (CHIP_IS_E1H(bp)) 12975 fw_file_name = FW_FILE_NAME_E1H; 12976 else if (!CHIP_IS_E1x(bp)) 12977 fw_file_name = FW_FILE_NAME_E2; 12978 else { 12979 BNX2X_ERR("Unsupported chip revision\n"); 12980 return -EINVAL; 12981 } 12982 BNX2X_DEV_INFO("Loading %s\n", fw_file_name); 12983 12984 rc = request_firmware(&bp->firmware, fw_file_name, &bp->pdev->dev); 12985 if (rc) { 12986 BNX2X_ERR("Can't load firmware file %s\n", 12987 fw_file_name); 12988 goto request_firmware_exit; 12989 } 12990 12991 rc = bnx2x_check_firmware(bp); 12992 if (rc) { 12993 BNX2X_ERR("Corrupt firmware file %s\n", fw_file_name); 12994 goto request_firmware_exit; 12995 } 12996 12997 fw_hdr = (struct bnx2x_fw_file_hdr *)bp->firmware->data; 12998 12999 /* Initialize the pointers to the init arrays */ 13000 /* Blob */ 13001 BNX2X_ALLOC_AND_SET(init_data, request_firmware_exit, be32_to_cpu_n); 13002 13003 /* Opcodes */ 13004 BNX2X_ALLOC_AND_SET(init_ops, init_ops_alloc_err, bnx2x_prep_ops); 13005 13006 /* Offsets */ 13007 BNX2X_ALLOC_AND_SET(init_ops_offsets, init_offsets_alloc_err, 13008 be16_to_cpu_n); 13009 13010 /* STORMs firmware */ 13011 INIT_TSEM_INT_TABLE_DATA(bp) = bp->firmware->data + 13012 be32_to_cpu(fw_hdr->tsem_int_table_data.offset); 13013 INIT_TSEM_PRAM_DATA(bp) = bp->firmware->data + 13014 be32_to_cpu(fw_hdr->tsem_pram_data.offset); 13015 INIT_USEM_INT_TABLE_DATA(bp) = bp->firmware->data + 13016 be32_to_cpu(fw_hdr->usem_int_table_data.offset); 13017 INIT_USEM_PRAM_DATA(bp) = bp->firmware->data + 13018 be32_to_cpu(fw_hdr->usem_pram_data.offset); 13019 INIT_XSEM_INT_TABLE_DATA(bp) = bp->firmware->data + 13020 be32_to_cpu(fw_hdr->xsem_int_table_data.offset); 13021 INIT_XSEM_PRAM_DATA(bp) = bp->firmware->data + 13022 be32_to_cpu(fw_hdr->xsem_pram_data.offset); 13023 INIT_CSEM_INT_TABLE_DATA(bp) = bp->firmware->data + 13024 be32_to_cpu(fw_hdr->csem_int_table_data.offset); 13025 INIT_CSEM_PRAM_DATA(bp) = bp->firmware->data + 13026 be32_to_cpu(fw_hdr->csem_pram_data.offset); 13027 /* IRO */ 13028 BNX2X_ALLOC_AND_SET(iro_arr, iro_alloc_err, bnx2x_prep_iro); 13029 13030 return 0; 13031 13032iro_alloc_err: 13033 kfree(bp->init_ops_offsets); 13034init_offsets_alloc_err: 13035 kfree(bp->init_ops); 13036init_ops_alloc_err: 13037 kfree(bp->init_data); 13038request_firmware_exit: 13039 release_firmware(bp->firmware); 13040 bp->firmware = NULL; 13041 13042 return rc; 13043} 13044 13045static void bnx2x_release_firmware(struct bnx2x *bp) 13046{ 13047 kfree(bp->init_ops_offsets); 13048 kfree(bp->init_ops); 13049 kfree(bp->init_data); 13050 release_firmware(bp->firmware); 13051 bp->firmware = NULL; 13052} 13053 13054static struct bnx2x_func_sp_drv_ops bnx2x_func_sp_drv = { 13055 .init_hw_cmn_chip = bnx2x_init_hw_common_chip, 13056 .init_hw_cmn = bnx2x_init_hw_common, 13057 .init_hw_port = bnx2x_init_hw_port, 13058 .init_hw_func = bnx2x_init_hw_func, 13059 13060 .reset_hw_cmn = bnx2x_reset_common, 13061 .reset_hw_port = bnx2x_reset_port, 13062 .reset_hw_func = bnx2x_reset_func, 13063 13064 .gunzip_init = bnx2x_gunzip_init, 13065 .gunzip_end = bnx2x_gunzip_end, 13066 13067 .init_fw = bnx2x_init_firmware, 13068 .release_fw = bnx2x_release_firmware, 13069}; 13070 13071void bnx2x__init_func_obj(struct bnx2x *bp) 13072{ 13073 /* Prepare DMAE related driver resources */ 13074 bnx2x_setup_dmae(bp); 13075 13076 bnx2x_init_func_obj(bp, &bp->func_obj, 13077 bnx2x_sp(bp, func_rdata), 13078 bnx2x_sp_mapping(bp, func_rdata), 13079 bnx2x_sp(bp, func_afex_rdata), 13080 bnx2x_sp_mapping(bp, func_afex_rdata), 13081 &bnx2x_func_sp_drv); 13082} 13083 13084/* must be called after sriov-enable */ 13085static int bnx2x_set_qm_cid_count(struct bnx2x *bp) 13086{ 13087 int cid_count = BNX2X_L2_MAX_CID(bp); 13088 13089 if (IS_SRIOV(bp)) 13090 cid_count += BNX2X_VF_CIDS; 13091 13092 if (CNIC_SUPPORT(bp)) 13093 cid_count += CNIC_CID_MAX; 13094 13095 return roundup(cid_count, QM_CID_ROUND); 13096} 13097 13098/** 13099 * bnx2x_get_num_none_def_sbs - return the number of none default SBs 13100 * 13101 * @dev: pci device 13102 * 13103 */ 13104static int bnx2x_get_num_non_def_sbs(struct pci_dev *pdev, int cnic_cnt) 13105{ 13106 int index; 13107 u16 control = 0; 13108 13109 /* 13110 * If MSI-X is not supported - return number of SBs needed to support 13111 * one fast path queue: one FP queue + SB for CNIC 13112 */ 13113 if (!pdev->msix_cap) { 13114 dev_info(&pdev->dev, "no msix capability found\n"); 13115 return 1 + cnic_cnt; 13116 } 13117 dev_info(&pdev->dev, "msix capability found\n"); 13118 13119 /* 13120 * The value in the PCI configuration space is the index of the last 13121 * entry, namely one less than the actual size of the table, which is 13122 * exactly what we want to return from this function: number of all SBs 13123 * without the default SB. 13124 * For VFs there is no default SB, then we return (index+1). 13125 */ 13126 pci_read_config_word(pdev, pdev->msix_cap + PCI_MSIX_FLAGS, &control); 13127 13128 index = control & PCI_MSIX_FLAGS_QSIZE; 13129 13130 return index; 13131} 13132 13133static int set_max_cos_est(int chip_id) 13134{ 13135 switch (chip_id) { 13136 case BCM57710: 13137 case BCM57711: 13138 case BCM57711E: 13139 return BNX2X_MULTI_TX_COS_E1X; 13140 case BCM57712: 13141 case BCM57712_MF: 13142 return BNX2X_MULTI_TX_COS_E2_E3A0; 13143 case BCM57800: 13144 case BCM57800_MF: 13145 case BCM57810: 13146 case BCM57810_MF: 13147 case BCM57840_4_10: 13148 case BCM57840_2_20: 13149 case BCM57840_O: 13150 case BCM57840_MFO: 13151 case BCM57840_MF: 13152 case BCM57811: 13153 case BCM57811_MF: 13154 return BNX2X_MULTI_TX_COS_E3B0; 13155 case BCM57712_VF: 13156 case BCM57800_VF: 13157 case BCM57810_VF: 13158 case BCM57840_VF: 13159 case BCM57811_VF: 13160 return 1; 13161 default: 13162 pr_err("Unknown board_type (%d), aborting\n", chip_id); 13163 return -ENODEV; 13164 } 13165} 13166 13167static int set_is_vf(int chip_id) 13168{ 13169 switch (chip_id) { 13170 case BCM57712_VF: 13171 case BCM57800_VF: 13172 case BCM57810_VF: 13173 case BCM57840_VF: 13174 case BCM57811_VF: 13175 return true; 13176 default: 13177 return false; 13178 } 13179} 13180 13181/* nig_tsgen registers relative address */ 13182#define tsgen_ctrl 0x0 13183#define tsgen_freecount 0x10 13184#define tsgen_synctime_t0 0x20 13185#define tsgen_offset_t0 0x28 13186#define tsgen_drift_t0 0x30 13187#define tsgen_synctime_t1 0x58 13188#define tsgen_offset_t1 0x60 13189#define tsgen_drift_t1 0x68 13190 13191/* FW workaround for setting drift */ 13192static int bnx2x_send_update_drift_ramrod(struct bnx2x *bp, int drift_dir, 13193 int best_val, int best_period) 13194{ 13195 struct bnx2x_func_state_params func_params = {NULL}; 13196 struct bnx2x_func_set_timesync_params *set_timesync_params = 13197 &func_params.params.set_timesync; 13198 13199 /* Prepare parameters for function state transitions */ 13200 __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags); 13201 __set_bit(RAMROD_RETRY, &func_params.ramrod_flags); 13202 13203 func_params.f_obj = &bp->func_obj; 13204 func_params.cmd = BNX2X_F_CMD_SET_TIMESYNC; 13205 13206 /* Function parameters */ 13207 set_timesync_params->drift_adjust_cmd = TS_DRIFT_ADJUST_SET; 13208 set_timesync_params->offset_cmd = TS_OFFSET_KEEP; 13209 set_timesync_params->add_sub_drift_adjust_value = 13210 drift_dir ? TS_ADD_VALUE : TS_SUB_VALUE; 13211 set_timesync_params->drift_adjust_value = best_val; 13212 set_timesync_params->drift_adjust_period = best_period; 13213 13214 return bnx2x_func_state_change(bp, &func_params); 13215} 13216 13217static int bnx2x_ptp_adjfreq(struct ptp_clock_info *ptp, s32 ppb) 13218{ 13219 struct bnx2x *bp = container_of(ptp, struct bnx2x, ptp_clock_info); 13220 int rc; 13221 int drift_dir = 1; 13222 int val, period, period1, period2, dif, dif1, dif2; 13223 int best_dif = BNX2X_MAX_PHC_DRIFT, best_period = 0, best_val = 0; 13224 13225 DP(BNX2X_MSG_PTP, "PTP adjfreq called, ppb = %d\n", ppb); 13226 13227 if (!netif_running(bp->dev)) { 13228 DP(BNX2X_MSG_PTP, 13229 "PTP adjfreq called while the interface is down\n"); 13230 return -EFAULT; 13231 } 13232 13233 if (ppb < 0) { 13234 ppb = -ppb; 13235 drift_dir = 0; 13236 } 13237 13238 if (ppb == 0) { 13239 best_val = 1; 13240 best_period = 0x1FFFFFF; 13241 } else if (ppb >= BNX2X_MAX_PHC_DRIFT) { 13242 best_val = 31; 13243 best_period = 1; 13244 } else { 13245 /* Changed not to allow val = 8, 16, 24 as these values 13246 * are not supported in workaround. 13247 */ 13248 for (val = 0; val <= 31; val++) { 13249 if ((val & 0x7) == 0) 13250 continue; 13251 period1 = val * 1000000 / ppb; 13252 period2 = period1 + 1; 13253 if (period1 != 0) 13254 dif1 = ppb - (val * 1000000 / period1); 13255 else 13256 dif1 = BNX2X_MAX_PHC_DRIFT; 13257 if (dif1 < 0) 13258 dif1 = -dif1; 13259 dif2 = ppb - (val * 1000000 / period2); 13260 if (dif2 < 0) 13261 dif2 = -dif2; 13262 dif = (dif1 < dif2) ? dif1 : dif2; 13263 period = (dif1 < dif2) ? period1 : period2; 13264 if (dif < best_dif) { 13265 best_dif = dif; 13266 best_val = val; 13267 best_period = period; 13268 } 13269 } 13270 } 13271 13272 rc = bnx2x_send_update_drift_ramrod(bp, drift_dir, best_val, 13273 best_period); 13274 if (rc) { 13275 BNX2X_ERR("Failed to set drift\n"); 13276 return -EFAULT; 13277 } 13278 13279 DP(BNX2X_MSG_PTP, "Configured val = %d, period = %d\n", best_val, 13280 best_period); 13281 13282 return 0; 13283} 13284 13285static int bnx2x_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta) 13286{ 13287 struct bnx2x *bp = container_of(ptp, struct bnx2x, ptp_clock_info); 13288 13289 DP(BNX2X_MSG_PTP, "PTP adjtime called, delta = %llx\n", delta); 13290 13291 timecounter_adjtime(&bp->timecounter, delta); 13292 13293 return 0; 13294} 13295 13296static int bnx2x_ptp_gettime(struct ptp_clock_info *ptp, struct timespec64 *ts) 13297{ 13298 struct bnx2x *bp = container_of(ptp, struct bnx2x, ptp_clock_info); 13299 u64 ns; 13300 13301 ns = timecounter_read(&bp->timecounter); 13302 13303 DP(BNX2X_MSG_PTP, "PTP gettime called, ns = %llu\n", ns); 13304 13305 *ts = ns_to_timespec64(ns); 13306 13307 return 0; 13308} 13309 13310static int bnx2x_ptp_settime(struct ptp_clock_info *ptp, 13311 const struct timespec64 *ts) 13312{ 13313 struct bnx2x *bp = container_of(ptp, struct bnx2x, ptp_clock_info); 13314 u64 ns; 13315 13316 ns = timespec64_to_ns(ts); 13317 13318 DP(BNX2X_MSG_PTP, "PTP settime called, ns = %llu\n", ns); 13319 13320 /* Re-init the timecounter */ 13321 timecounter_init(&bp->timecounter, &bp->cyclecounter, ns); 13322 13323 return 0; 13324} 13325 13326/* Enable (or disable) ancillary features of the phc subsystem */ 13327static int bnx2x_ptp_enable(struct ptp_clock_info *ptp, 13328 struct ptp_clock_request *rq, int on) 13329{ 13330 struct bnx2x *bp = container_of(ptp, struct bnx2x, ptp_clock_info); 13331 13332 BNX2X_ERR("PHC ancillary features are not supported\n"); 13333 return -ENOTSUPP; 13334} 13335 13336static void bnx2x_register_phc(struct bnx2x *bp) 13337{ 13338 /* Fill the ptp_clock_info struct and register PTP clock*/ 13339 bp->ptp_clock_info.owner = THIS_MODULE; 13340 snprintf(bp->ptp_clock_info.name, 16, "%s", bp->dev->name); 13341 bp->ptp_clock_info.max_adj = BNX2X_MAX_PHC_DRIFT; /* In PPB */ 13342 bp->ptp_clock_info.n_alarm = 0; 13343 bp->ptp_clock_info.n_ext_ts = 0; 13344 bp->ptp_clock_info.n_per_out = 0; 13345 bp->ptp_clock_info.pps = 0; 13346 bp->ptp_clock_info.adjfreq = bnx2x_ptp_adjfreq; 13347 bp->ptp_clock_info.adjtime = bnx2x_ptp_adjtime; 13348 bp->ptp_clock_info.gettime64 = bnx2x_ptp_gettime; 13349 bp->ptp_clock_info.settime64 = bnx2x_ptp_settime; 13350 bp->ptp_clock_info.enable = bnx2x_ptp_enable; 13351 13352 bp->ptp_clock = ptp_clock_register(&bp->ptp_clock_info, &bp->pdev->dev); 13353 if (IS_ERR(bp->ptp_clock)) { 13354 bp->ptp_clock = NULL; 13355 BNX2X_ERR("PTP clock registeration failed\n"); 13356 } 13357} 13358 13359static int bnx2x_init_one(struct pci_dev *pdev, 13360 const struct pci_device_id *ent) 13361{ 13362 struct net_device *dev = NULL; 13363 struct bnx2x *bp; 13364 enum pcie_link_width pcie_width; 13365 enum pci_bus_speed pcie_speed; 13366 int rc, max_non_def_sbs; 13367 int rx_count, tx_count, rss_count, doorbell_size; 13368 int max_cos_est; 13369 bool is_vf; 13370 int cnic_cnt; 13371 13372 /* Management FW 'remembers' living interfaces. Allow it some time 13373 * to forget previously living interfaces, allowing a proper re-load. 13374 */ 13375 if (is_kdump_kernel()) { 13376 ktime_t now = ktime_get_boottime(); 13377 ktime_t fw_ready_time = ktime_set(5, 0); 13378 13379 if (ktime_before(now, fw_ready_time)) 13380 msleep(ktime_ms_delta(fw_ready_time, now)); 13381 } 13382 13383 /* An estimated maximum supported CoS number according to the chip 13384 * version. 13385 * We will try to roughly estimate the maximum number of CoSes this chip 13386 * may support in order to minimize the memory allocated for Tx 13387 * netdev_queue's. This number will be accurately calculated during the 13388 * initialization of bp->max_cos based on the chip versions AND chip 13389 * revision in the bnx2x_init_bp(). 13390 */ 13391 max_cos_est = set_max_cos_est(ent->driver_data); 13392 if (max_cos_est < 0) 13393 return max_cos_est; 13394 is_vf = set_is_vf(ent->driver_data); 13395 cnic_cnt = is_vf ? 0 : 1; 13396 13397 max_non_def_sbs = bnx2x_get_num_non_def_sbs(pdev, cnic_cnt); 13398 13399 /* add another SB for VF as it has no default SB */ 13400 max_non_def_sbs += is_vf ? 1 : 0; 13401 13402 /* Maximum number of RSS queues: one IGU SB goes to CNIC */ 13403 rss_count = max_non_def_sbs - cnic_cnt; 13404 13405 if (rss_count < 1) 13406 return -EINVAL; 13407 13408 /* Maximum number of netdev Rx queues: RSS + FCoE L2 */ 13409 rx_count = rss_count + cnic_cnt; 13410 13411 /* Maximum number of netdev Tx queues: 13412 * Maximum TSS queues * Maximum supported number of CoS + FCoE L2 13413 */ 13414 tx_count = rss_count * max_cos_est + cnic_cnt; 13415 13416 /* dev zeroed in init_etherdev */ 13417 dev = alloc_etherdev_mqs(sizeof(*bp), tx_count, rx_count); 13418 if (!dev) 13419 return -ENOMEM; 13420 13421 bp = netdev_priv(dev); 13422 13423 bp->flags = 0; 13424 if (is_vf) 13425 bp->flags |= IS_VF_FLAG; 13426 13427 bp->igu_sb_cnt = max_non_def_sbs; 13428 bp->igu_base_addr = IS_VF(bp) ? PXP_VF_ADDR_IGU_START : BAR_IGU_INTMEM; 13429 bp->msg_enable = debug; 13430 bp->cnic_support = cnic_cnt; 13431 bp->cnic_probe = bnx2x_cnic_probe; 13432 13433 pci_set_drvdata(pdev, dev); 13434 13435 rc = bnx2x_init_dev(bp, pdev, dev, ent->driver_data); 13436 if (rc < 0) { 13437 free_netdev(dev); 13438 return rc; 13439 } 13440 13441 BNX2X_DEV_INFO("This is a %s function\n", 13442 IS_PF(bp) ? "physical" : "virtual"); 13443 BNX2X_DEV_INFO("Cnic support is %s\n", CNIC_SUPPORT(bp) ? "on" : "off"); 13444 BNX2X_DEV_INFO("Max num of status blocks %d\n", max_non_def_sbs); 13445 BNX2X_DEV_INFO("Allocated netdev with %d tx and %d rx queues\n", 13446 tx_count, rx_count); 13447 13448 rc = bnx2x_init_bp(bp); 13449 if (rc) 13450 goto init_one_exit; 13451 13452 /* Map doorbells here as we need the real value of bp->max_cos which 13453 * is initialized in bnx2x_init_bp() to determine the number of 13454 * l2 connections. 13455 */ 13456 if (IS_VF(bp)) { 13457 bp->doorbells = bnx2x_vf_doorbells(bp); 13458 rc = bnx2x_vf_pci_alloc(bp); 13459 if (rc) 13460 goto init_one_exit; 13461 } else { 13462 doorbell_size = BNX2X_L2_MAX_CID(bp) * (1 << BNX2X_DB_SHIFT); 13463 if (doorbell_size > pci_resource_len(pdev, 2)) { 13464 dev_err(&bp->pdev->dev, 13465 "Cannot map doorbells, bar size too small, aborting\n"); 13466 rc = -ENOMEM; 13467 goto init_one_exit; 13468 } 13469 bp->doorbells = ioremap_nocache(pci_resource_start(pdev, 2), 13470 doorbell_size); 13471 } 13472 if (!bp->doorbells) { 13473 dev_err(&bp->pdev->dev, 13474 "Cannot map doorbell space, aborting\n"); 13475 rc = -ENOMEM; 13476 goto init_one_exit; 13477 } 13478 13479 if (IS_VF(bp)) { 13480 rc = bnx2x_vfpf_acquire(bp, tx_count, rx_count); 13481 if (rc) 13482 goto init_one_exit; 13483 } 13484 13485 /* Enable SRIOV if capability found in configuration space */ 13486 rc = bnx2x_iov_init_one(bp, int_mode, BNX2X_MAX_NUM_OF_VFS); 13487 if (rc) 13488 goto init_one_exit; 13489 13490 /* calc qm_cid_count */ 13491 bp->qm_cid_count = bnx2x_set_qm_cid_count(bp); 13492 BNX2X_DEV_INFO("qm_cid_count %d\n", bp->qm_cid_count); 13493 13494 /* disable FCOE L2 queue for E1x*/ 13495 if (CHIP_IS_E1x(bp)) 13496 bp->flags |= NO_FCOE_FLAG; 13497 13498 /* Set bp->num_queues for MSI-X mode*/ 13499 bnx2x_set_num_queues(bp); 13500 13501 /* Configure interrupt mode: try to enable MSI-X/MSI if 13502 * needed. 13503 */ 13504 rc = bnx2x_set_int_mode(bp); 13505 if (rc) { 13506 dev_err(&pdev->dev, "Cannot set interrupts\n"); 13507 goto init_one_exit; 13508 } 13509 BNX2X_DEV_INFO("set interrupts successfully\n"); 13510 13511 /* register the net device */ 13512 rc = register_netdev(dev); 13513 if (rc) { 13514 dev_err(&pdev->dev, "Cannot register net device\n"); 13515 goto init_one_exit; 13516 } 13517 BNX2X_DEV_INFO("device name after netdev register %s\n", dev->name); 13518 13519 if (!NO_FCOE(bp)) { 13520 /* Add storage MAC address */ 13521 rtnl_lock(); 13522 dev_addr_add(bp->dev, bp->fip_mac, NETDEV_HW_ADDR_T_SAN); 13523 rtnl_unlock(); 13524 } 13525 if (pcie_get_minimum_link(bp->pdev, &pcie_speed, &pcie_width) || 13526 pcie_speed == PCI_SPEED_UNKNOWN || 13527 pcie_width == PCIE_LNK_WIDTH_UNKNOWN) 13528 BNX2X_DEV_INFO("Failed to determine PCI Express Bandwidth\n"); 13529 else 13530 BNX2X_DEV_INFO( 13531 "%s (%c%d) PCI-E x%d %s found at mem %lx, IRQ %d, node addr %pM\n", 13532 board_info[ent->driver_data].name, 13533 (CHIP_REV(bp) >> 12) + 'A', (CHIP_METAL(bp) >> 4), 13534 pcie_width, 13535 pcie_speed == PCIE_SPEED_2_5GT ? "2.5GHz" : 13536 pcie_speed == PCIE_SPEED_5_0GT ? "5.0GHz" : 13537 pcie_speed == PCIE_SPEED_8_0GT ? "8.0GHz" : 13538 "Unknown", 13539 dev->base_addr, bp->pdev->irq, dev->dev_addr); 13540 13541 bnx2x_register_phc(bp); 13542 13543 return 0; 13544 13545init_one_exit: 13546 bnx2x_disable_pcie_error_reporting(bp); 13547 13548 if (bp->regview) 13549 iounmap(bp->regview); 13550 13551 if (IS_PF(bp) && bp->doorbells) 13552 iounmap(bp->doorbells); 13553 13554 free_netdev(dev); 13555 13556 if (atomic_read(&pdev->enable_cnt) == 1) 13557 pci_release_regions(pdev); 13558 13559 pci_disable_device(pdev); 13560 13561 return rc; 13562} 13563 13564static void __bnx2x_remove(struct pci_dev *pdev, 13565 struct net_device *dev, 13566 struct bnx2x *bp, 13567 bool remove_netdev) 13568{ 13569 if (bp->ptp_clock) { 13570 ptp_clock_unregister(bp->ptp_clock); 13571 bp->ptp_clock = NULL; 13572 } 13573 13574 /* Delete storage MAC address */ 13575 if (!NO_FCOE(bp)) { 13576 rtnl_lock(); 13577 dev_addr_del(bp->dev, bp->fip_mac, NETDEV_HW_ADDR_T_SAN); 13578 rtnl_unlock(); 13579 } 13580 13581#ifdef BCM_DCBNL 13582 /* Delete app tlvs from dcbnl */ 13583 bnx2x_dcbnl_update_applist(bp, true); 13584#endif 13585 13586 if (IS_PF(bp) && 13587 !BP_NOMCP(bp) && 13588 (bp->flags & BC_SUPPORTS_RMMOD_CMD)) 13589 bnx2x_fw_command(bp, DRV_MSG_CODE_RMMOD, 0); 13590 13591 /* Close the interface - either directly or implicitly */ 13592 if (remove_netdev) { 13593 unregister_netdev(dev); 13594 } else { 13595 rtnl_lock(); 13596 dev_close(dev); 13597 rtnl_unlock(); 13598 } 13599 13600 bnx2x_iov_remove_one(bp); 13601 13602 /* Power on: we can't let PCI layer write to us while we are in D3 */ 13603 if (IS_PF(bp)) { 13604 bnx2x_set_power_state(bp, PCI_D0); 13605 13606 /* Set endianity registers to reset values in case next driver 13607 * boots in different endianty environment. 13608 */ 13609 bnx2x_reset_endianity(bp); 13610 } 13611 13612 /* Disable MSI/MSI-X */ 13613 bnx2x_disable_msi(bp); 13614 13615 /* Power off */ 13616 if (IS_PF(bp)) 13617 bnx2x_set_power_state(bp, PCI_D3hot); 13618 13619 /* Make sure RESET task is not scheduled before continuing */ 13620 cancel_delayed_work_sync(&bp->sp_rtnl_task); 13621 13622 /* send message via vfpf channel to release the resources of this vf */ 13623 if (IS_VF(bp)) 13624 bnx2x_vfpf_release(bp); 13625 13626 /* Assumes no further PCIe PM changes will occur */ 13627 if (system_state == SYSTEM_POWER_OFF) { 13628 pci_wake_from_d3(pdev, bp->wol); 13629 pci_set_power_state(pdev, PCI_D3hot); 13630 } 13631 13632 bnx2x_disable_pcie_error_reporting(bp); 13633 if (remove_netdev) { 13634 if (bp->regview) 13635 iounmap(bp->regview); 13636 13637 /* For vfs, doorbells are part of the regview and were unmapped 13638 * along with it. FW is only loaded by PF. 13639 */ 13640 if (IS_PF(bp)) { 13641 if (bp->doorbells) 13642 iounmap(bp->doorbells); 13643 13644 bnx2x_release_firmware(bp); 13645 } else { 13646 bnx2x_vf_pci_dealloc(bp); 13647 } 13648 bnx2x_free_mem_bp(bp); 13649 13650 free_netdev(dev); 13651 13652 if (atomic_read(&pdev->enable_cnt) == 1) 13653 pci_release_regions(pdev); 13654 13655 pci_disable_device(pdev); 13656 } 13657} 13658 13659static void bnx2x_remove_one(struct pci_dev *pdev) 13660{ 13661 struct net_device *dev = pci_get_drvdata(pdev); 13662 struct bnx2x *bp; 13663 13664 if (!dev) { 13665 dev_err(&pdev->dev, "BAD net device from bnx2x_init_one\n"); 13666 return; 13667 } 13668 bp = netdev_priv(dev); 13669 13670 __bnx2x_remove(pdev, dev, bp, true); 13671} 13672 13673static int bnx2x_eeh_nic_unload(struct bnx2x *bp) 13674{ 13675 bp->state = BNX2X_STATE_CLOSING_WAIT4_HALT; 13676 13677 bp->rx_mode = BNX2X_RX_MODE_NONE; 13678 13679 if (CNIC_LOADED(bp)) 13680 bnx2x_cnic_notify(bp, CNIC_CTL_STOP_CMD); 13681 13682 /* Stop Tx */ 13683 bnx2x_tx_disable(bp); 13684 /* Delete all NAPI objects */ 13685 bnx2x_del_all_napi(bp); 13686 if (CNIC_LOADED(bp)) 13687 bnx2x_del_all_napi_cnic(bp); 13688 netdev_reset_tc(bp->dev); 13689 13690 del_timer_sync(&bp->timer); 13691 cancel_delayed_work_sync(&bp->sp_task); 13692 cancel_delayed_work_sync(&bp->period_task); 13693 13694 if (!down_timeout(&bp->stats_lock, HZ / 10)) { 13695 bp->stats_state = STATS_STATE_DISABLED; 13696 up(&bp->stats_lock); 13697 } 13698 13699 bnx2x_save_statistics(bp); 13700 13701 netif_carrier_off(bp->dev); 13702 13703 return 0; 13704} 13705 13706/** 13707 * bnx2x_io_error_detected - called when PCI error is detected 13708 * @pdev: Pointer to PCI device 13709 * @state: The current pci connection state 13710 * 13711 * This function is called after a PCI bus error affecting 13712 * this device has been detected. 13713 */ 13714static pci_ers_result_t bnx2x_io_error_detected(struct pci_dev *pdev, 13715 pci_channel_state_t state) 13716{ 13717 struct net_device *dev = pci_get_drvdata(pdev); 13718 struct bnx2x *bp = netdev_priv(dev); 13719 13720 rtnl_lock(); 13721 13722 BNX2X_ERR("IO error detected\n"); 13723 13724 netif_device_detach(dev); 13725 13726 if (state == pci_channel_io_perm_failure) { 13727 rtnl_unlock(); 13728 return PCI_ERS_RESULT_DISCONNECT; 13729 } 13730 13731 if (netif_running(dev)) 13732 bnx2x_eeh_nic_unload(bp); 13733 13734 bnx2x_prev_path_mark_eeh(bp); 13735 13736 pci_disable_device(pdev); 13737 13738 rtnl_unlock(); 13739 13740 /* Request a slot reset */ 13741 return PCI_ERS_RESULT_NEED_RESET; 13742} 13743 13744/** 13745 * bnx2x_io_slot_reset - called after the PCI bus has been reset 13746 * @pdev: Pointer to PCI device 13747 * 13748 * Restart the card from scratch, as if from a cold-boot. 13749 */ 13750static pci_ers_result_t bnx2x_io_slot_reset(struct pci_dev *pdev) 13751{ 13752 struct net_device *dev = pci_get_drvdata(pdev); 13753 struct bnx2x *bp = netdev_priv(dev); 13754 int i; 13755 13756 rtnl_lock(); 13757 BNX2X_ERR("IO slot reset initializing...\n"); 13758 if (pci_enable_device(pdev)) { 13759 dev_err(&pdev->dev, 13760 "Cannot re-enable PCI device after reset\n"); 13761 rtnl_unlock(); 13762 return PCI_ERS_RESULT_DISCONNECT; 13763 } 13764 13765 pci_set_master(pdev); 13766 pci_restore_state(pdev); 13767 pci_save_state(pdev); 13768 13769 if (netif_running(dev)) 13770 bnx2x_set_power_state(bp, PCI_D0); 13771 13772 if (netif_running(dev)) { 13773 BNX2X_ERR("IO slot reset --> driver unload\n"); 13774 13775 /* MCP should have been reset; Need to wait for validity */ 13776 bnx2x_init_shmem(bp); 13777 13778 if (IS_PF(bp) && SHMEM2_HAS(bp, drv_capabilities_flag)) { 13779 u32 v; 13780 13781 v = SHMEM2_RD(bp, 13782 drv_capabilities_flag[BP_FW_MB_IDX(bp)]); 13783 SHMEM2_WR(bp, drv_capabilities_flag[BP_FW_MB_IDX(bp)], 13784 v & ~DRV_FLAGS_CAPABILITIES_LOADED_L2); 13785 } 13786 bnx2x_drain_tx_queues(bp); 13787 bnx2x_send_unload_req(bp, UNLOAD_RECOVERY); 13788 bnx2x_netif_stop(bp, 1); 13789 bnx2x_free_irq(bp); 13790 13791 /* Report UNLOAD_DONE to MCP */ 13792 bnx2x_send_unload_done(bp, true); 13793 13794 bp->sp_state = 0; 13795 bp->port.pmf = 0; 13796 13797 bnx2x_prev_unload(bp); 13798 13799 /* We should have reseted the engine, so It's fair to 13800 * assume the FW will no longer write to the bnx2x driver. 13801 */ 13802 bnx2x_squeeze_objects(bp); 13803 bnx2x_free_skbs(bp); 13804 for_each_rx_queue(bp, i) 13805 bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE); 13806 bnx2x_free_fp_mem(bp); 13807 bnx2x_free_mem(bp); 13808 13809 bp->state = BNX2X_STATE_CLOSED; 13810 } 13811 13812 rtnl_unlock(); 13813 13814 /* If AER, perform cleanup of the PCIe registers */ 13815 if (bp->flags & AER_ENABLED) { 13816 if (pci_cleanup_aer_uncorrect_error_status(pdev)) 13817 BNX2X_ERR("pci_cleanup_aer_uncorrect_error_status failed\n"); 13818 else 13819 DP(NETIF_MSG_HW, "pci_cleanup_aer_uncorrect_error_status succeeded\n"); 13820 } 13821 13822 return PCI_ERS_RESULT_RECOVERED; 13823} 13824 13825/** 13826 * bnx2x_io_resume - called when traffic can start flowing again 13827 * @pdev: Pointer to PCI device 13828 * 13829 * This callback is called when the error recovery driver tells us that 13830 * its OK to resume normal operation. 13831 */ 13832static void bnx2x_io_resume(struct pci_dev *pdev) 13833{ 13834 struct net_device *dev = pci_get_drvdata(pdev); 13835 struct bnx2x *bp = netdev_priv(dev); 13836 13837 if (bp->recovery_state != BNX2X_RECOVERY_DONE) { 13838 netdev_err(bp->dev, "Handling parity error recovery. Try again later\n"); 13839 return; 13840 } 13841 13842 rtnl_lock(); 13843 13844 bp->fw_seq = SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_mb_header) & 13845 DRV_MSG_SEQ_NUMBER_MASK; 13846 13847 if (netif_running(dev)) 13848 bnx2x_nic_load(bp, LOAD_NORMAL); 13849 13850 netif_device_attach(dev); 13851 13852 rtnl_unlock(); 13853} 13854 13855static const struct pci_error_handlers bnx2x_err_handler = { 13856 .error_detected = bnx2x_io_error_detected, 13857 .slot_reset = bnx2x_io_slot_reset, 13858 .resume = bnx2x_io_resume, 13859}; 13860 13861static void bnx2x_shutdown(struct pci_dev *pdev) 13862{ 13863 struct net_device *dev = pci_get_drvdata(pdev); 13864 struct bnx2x *bp; 13865 13866 if (!dev) 13867 return; 13868 13869 bp = netdev_priv(dev); 13870 if (!bp) 13871 return; 13872 13873 rtnl_lock(); 13874 netif_device_detach(dev); 13875 rtnl_unlock(); 13876 13877 /* Don't remove the netdevice, as there are scenarios which will cause 13878 * the kernel to hang, e.g., when trying to remove bnx2i while the 13879 * rootfs is mounted from SAN. 13880 */ 13881 __bnx2x_remove(pdev, dev, bp, false); 13882} 13883 13884static struct pci_driver bnx2x_pci_driver = { 13885 .name = DRV_MODULE_NAME, 13886 .id_table = bnx2x_pci_tbl, 13887 .probe = bnx2x_init_one, 13888 .remove = bnx2x_remove_one, 13889 .suspend = bnx2x_suspend, 13890 .resume = bnx2x_resume, 13891 .err_handler = &bnx2x_err_handler, 13892#ifdef CONFIG_BNX2X_SRIOV 13893 .sriov_configure = bnx2x_sriov_configure, 13894#endif 13895 .shutdown = bnx2x_shutdown, 13896}; 13897 13898static int __init bnx2x_init(void) 13899{ 13900 int ret; 13901 13902 pr_info("%s", version); 13903 13904 bnx2x_wq = create_singlethread_workqueue("bnx2x"); 13905 if (bnx2x_wq == NULL) { 13906 pr_err("Cannot create workqueue\n"); 13907 return -ENOMEM; 13908 } 13909 bnx2x_iov_wq = create_singlethread_workqueue("bnx2x_iov"); 13910 if (!bnx2x_iov_wq) { 13911 pr_err("Cannot create iov workqueue\n"); 13912 destroy_workqueue(bnx2x_wq); 13913 return -ENOMEM; 13914 } 13915 13916 ret = pci_register_driver(&bnx2x_pci_driver); 13917 if (ret) { 13918 pr_err("Cannot register driver\n"); 13919 destroy_workqueue(bnx2x_wq); 13920 destroy_workqueue(bnx2x_iov_wq); 13921 } 13922 return ret; 13923} 13924 13925static void __exit bnx2x_cleanup(void) 13926{ 13927 struct list_head *pos, *q; 13928 13929 pci_unregister_driver(&bnx2x_pci_driver); 13930 13931 destroy_workqueue(bnx2x_wq); 13932 destroy_workqueue(bnx2x_iov_wq); 13933 13934 /* Free globally allocated resources */ 13935 list_for_each_safe(pos, q, &bnx2x_prev_list) { 13936 struct bnx2x_prev_path_list *tmp = 13937 list_entry(pos, struct bnx2x_prev_path_list, list); 13938 list_del(pos); 13939 kfree(tmp); 13940 } 13941} 13942 13943void bnx2x_notify_link_changed(struct bnx2x *bp) 13944{ 13945 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_12 + BP_FUNC(bp)*sizeof(u32), 1); 13946} 13947 13948module_init(bnx2x_init); 13949module_exit(bnx2x_cleanup); 13950 13951/** 13952 * bnx2x_set_iscsi_eth_mac_addr - set iSCSI MAC(s). 13953 * 13954 * @bp: driver handle 13955 * @set: set or clear the CAM entry 13956 * 13957 * This function will wait until the ramrod completion returns. 13958 * Return 0 if success, -ENODEV if ramrod doesn't return. 13959 */ 13960static int bnx2x_set_iscsi_eth_mac_addr(struct bnx2x *bp) 13961{ 13962 unsigned long ramrod_flags = 0; 13963 13964 __set_bit(RAMROD_COMP_WAIT, &ramrod_flags); 13965 return bnx2x_set_mac_one(bp, bp->cnic_eth_dev.iscsi_mac, 13966 &bp->iscsi_l2_mac_obj, true, 13967 BNX2X_ISCSI_ETH_MAC, &ramrod_flags); 13968} 13969 13970/* count denotes the number of new completions we have seen */ 13971static void bnx2x_cnic_sp_post(struct bnx2x *bp, int count) 13972{ 13973 struct eth_spe *spe; 13974 int cxt_index, cxt_offset; 13975 13976#ifdef BNX2X_STOP_ON_ERROR 13977 if (unlikely(bp->panic)) 13978 return; 13979#endif 13980 13981 spin_lock_bh(&bp->spq_lock); 13982 BUG_ON(bp->cnic_spq_pending < count); 13983 bp->cnic_spq_pending -= count; 13984 13985 for (; bp->cnic_kwq_pending; bp->cnic_kwq_pending--) { 13986 u16 type = (le16_to_cpu(bp->cnic_kwq_cons->hdr.type) 13987 & SPE_HDR_CONN_TYPE) >> 13988 SPE_HDR_CONN_TYPE_SHIFT; 13989 u8 cmd = (le32_to_cpu(bp->cnic_kwq_cons->hdr.conn_and_cmd_data) 13990 >> SPE_HDR_CMD_ID_SHIFT) & 0xff; 13991 13992 /* Set validation for iSCSI L2 client before sending SETUP 13993 * ramrod 13994 */ 13995 if (type == ETH_CONNECTION_TYPE) { 13996 if (cmd == RAMROD_CMD_ID_ETH_CLIENT_SETUP) { 13997 cxt_index = BNX2X_ISCSI_ETH_CID(bp) / 13998 ILT_PAGE_CIDS; 13999 cxt_offset = BNX2X_ISCSI_ETH_CID(bp) - 14000 (cxt_index * ILT_PAGE_CIDS); 14001 bnx2x_set_ctx_validation(bp, 14002 &bp->context[cxt_index]. 14003 vcxt[cxt_offset].eth, 14004 BNX2X_ISCSI_ETH_CID(bp)); 14005 } 14006 } 14007 14008 /* 14009 * There may be not more than 8 L2, not more than 8 L5 SPEs 14010 * and in the air. We also check that number of outstanding 14011 * COMMON ramrods is not more than the EQ and SPQ can 14012 * accommodate. 14013 */ 14014 if (type == ETH_CONNECTION_TYPE) { 14015 if (!atomic_read(&bp->cq_spq_left)) 14016 break; 14017 else 14018 atomic_dec(&bp->cq_spq_left); 14019 } else if (type == NONE_CONNECTION_TYPE) { 14020 if (!atomic_read(&bp->eq_spq_left)) 14021 break; 14022 else 14023 atomic_dec(&bp->eq_spq_left); 14024 } else if ((type == ISCSI_CONNECTION_TYPE) || 14025 (type == FCOE_CONNECTION_TYPE)) { 14026 if (bp->cnic_spq_pending >= 14027 bp->cnic_eth_dev.max_kwqe_pending) 14028 break; 14029 else 14030 bp->cnic_spq_pending++; 14031 } else { 14032 BNX2X_ERR("Unknown SPE type: %d\n", type); 14033 bnx2x_panic(); 14034 break; 14035 } 14036 14037 spe = bnx2x_sp_get_next(bp); 14038 *spe = *bp->cnic_kwq_cons; 14039 14040 DP(BNX2X_MSG_SP, "pending on SPQ %d, on KWQ %d count %d\n", 14041 bp->cnic_spq_pending, bp->cnic_kwq_pending, count); 14042 14043 if (bp->cnic_kwq_cons == bp->cnic_kwq_last) 14044 bp->cnic_kwq_cons = bp->cnic_kwq; 14045 else 14046 bp->cnic_kwq_cons++; 14047 } 14048 bnx2x_sp_prod_update(bp); 14049 spin_unlock_bh(&bp->spq_lock); 14050} 14051 14052static int bnx2x_cnic_sp_queue(struct net_device *dev, 14053 struct kwqe_16 *kwqes[], u32 count) 14054{ 14055 struct bnx2x *bp = netdev_priv(dev); 14056 int i; 14057 14058#ifdef BNX2X_STOP_ON_ERROR 14059 if (unlikely(bp->panic)) { 14060 BNX2X_ERR("Can't post to SP queue while panic\n"); 14061 return -EIO; 14062 } 14063#endif 14064 14065 if ((bp->recovery_state != BNX2X_RECOVERY_DONE) && 14066 (bp->recovery_state != BNX2X_RECOVERY_NIC_LOADING)) { 14067 BNX2X_ERR("Handling parity error recovery. Try again later\n"); 14068 return -EAGAIN; 14069 } 14070 14071 spin_lock_bh(&bp->spq_lock); 14072 14073 for (i = 0; i < count; i++) { 14074 struct eth_spe *spe = (struct eth_spe *)kwqes[i]; 14075 14076 if (bp->cnic_kwq_pending == MAX_SP_DESC_CNT) 14077 break; 14078 14079 *bp->cnic_kwq_prod = *spe; 14080 14081 bp->cnic_kwq_pending++; 14082 14083 DP(BNX2X_MSG_SP, "L5 SPQE %x %x %x:%x pos %d\n", 14084 spe->hdr.conn_and_cmd_data, spe->hdr.type, 14085 spe->data.update_data_addr.hi, 14086 spe->data.update_data_addr.lo, 14087 bp->cnic_kwq_pending); 14088 14089 if (bp->cnic_kwq_prod == bp->cnic_kwq_last) 14090 bp->cnic_kwq_prod = bp->cnic_kwq; 14091 else 14092 bp->cnic_kwq_prod++; 14093 } 14094 14095 spin_unlock_bh(&bp->spq_lock); 14096 14097 if (bp->cnic_spq_pending < bp->cnic_eth_dev.max_kwqe_pending) 14098 bnx2x_cnic_sp_post(bp, 0); 14099 14100 return i; 14101} 14102 14103static int bnx2x_cnic_ctl_send(struct bnx2x *bp, struct cnic_ctl_info *ctl) 14104{ 14105 struct cnic_ops *c_ops; 14106 int rc = 0; 14107 14108 mutex_lock(&bp->cnic_mutex); 14109 c_ops = rcu_dereference_protected(bp->cnic_ops, 14110 lockdep_is_held(&bp->cnic_mutex)); 14111 if (c_ops) 14112 rc = c_ops->cnic_ctl(bp->cnic_data, ctl); 14113 mutex_unlock(&bp->cnic_mutex); 14114 14115 return rc; 14116} 14117 14118static int bnx2x_cnic_ctl_send_bh(struct bnx2x *bp, struct cnic_ctl_info *ctl) 14119{ 14120 struct cnic_ops *c_ops; 14121 int rc = 0; 14122 14123 rcu_read_lock(); 14124 c_ops = rcu_dereference(bp->cnic_ops); 14125 if (c_ops) 14126 rc = c_ops->cnic_ctl(bp->cnic_data, ctl); 14127 rcu_read_unlock(); 14128 14129 return rc; 14130} 14131 14132/* 14133 * for commands that have no data 14134 */ 14135int bnx2x_cnic_notify(struct bnx2x *bp, int cmd) 14136{ 14137 struct cnic_ctl_info ctl = {0}; 14138 14139 ctl.cmd = cmd; 14140 14141 return bnx2x_cnic_ctl_send(bp, &ctl); 14142} 14143 14144static void bnx2x_cnic_cfc_comp(struct bnx2x *bp, int cid, u8 err) 14145{ 14146 struct cnic_ctl_info ctl = {0}; 14147 14148 /* first we tell CNIC and only then we count this as a completion */ 14149 ctl.cmd = CNIC_CTL_COMPLETION_CMD; 14150 ctl.data.comp.cid = cid; 14151 ctl.data.comp.error = err; 14152 14153 bnx2x_cnic_ctl_send_bh(bp, &ctl); 14154 bnx2x_cnic_sp_post(bp, 0); 14155} 14156 14157/* Called with netif_addr_lock_bh() taken. 14158 * Sets an rx_mode config for an iSCSI ETH client. 14159 * Doesn't block. 14160 * Completion should be checked outside. 14161 */ 14162static void bnx2x_set_iscsi_eth_rx_mode(struct bnx2x *bp, bool start) 14163{ 14164 unsigned long accept_flags = 0, ramrod_flags = 0; 14165 u8 cl_id = bnx2x_cnic_eth_cl_id(bp, BNX2X_ISCSI_ETH_CL_ID_IDX); 14166 int sched_state = BNX2X_FILTER_ISCSI_ETH_STOP_SCHED; 14167 14168 if (start) { 14169 /* Start accepting on iSCSI L2 ring. Accept all multicasts 14170 * because it's the only way for UIO Queue to accept 14171 * multicasts (in non-promiscuous mode only one Queue per 14172 * function will receive multicast packets (leading in our 14173 * case). 14174 */ 14175 __set_bit(BNX2X_ACCEPT_UNICAST, &accept_flags); 14176 __set_bit(BNX2X_ACCEPT_ALL_MULTICAST, &accept_flags); 14177 __set_bit(BNX2X_ACCEPT_BROADCAST, &accept_flags); 14178 __set_bit(BNX2X_ACCEPT_ANY_VLAN, &accept_flags); 14179 14180 /* Clear STOP_PENDING bit if START is requested */ 14181 clear_bit(BNX2X_FILTER_ISCSI_ETH_STOP_SCHED, &bp->sp_state); 14182 14183 sched_state = BNX2X_FILTER_ISCSI_ETH_START_SCHED; 14184 } else 14185 /* Clear START_PENDING bit if STOP is requested */ 14186 clear_bit(BNX2X_FILTER_ISCSI_ETH_START_SCHED, &bp->sp_state); 14187 14188 if (test_bit(BNX2X_FILTER_RX_MODE_PENDING, &bp->sp_state)) 14189 set_bit(sched_state, &bp->sp_state); 14190 else { 14191 __set_bit(RAMROD_RX, &ramrod_flags); 14192 bnx2x_set_q_rx_mode(bp, cl_id, 0, accept_flags, 0, 14193 ramrod_flags); 14194 } 14195} 14196 14197static int bnx2x_drv_ctl(struct net_device *dev, struct drv_ctl_info *ctl) 14198{ 14199 struct bnx2x *bp = netdev_priv(dev); 14200 int rc = 0; 14201 14202 switch (ctl->cmd) { 14203 case DRV_CTL_CTXTBL_WR_CMD: { 14204 u32 index = ctl->data.io.offset; 14205 dma_addr_t addr = ctl->data.io.dma_addr; 14206 14207 bnx2x_ilt_wr(bp, index, addr); 14208 break; 14209 } 14210 14211 case DRV_CTL_RET_L5_SPQ_CREDIT_CMD: { 14212 int count = ctl->data.credit.credit_count; 14213 14214 bnx2x_cnic_sp_post(bp, count); 14215 break; 14216 } 14217 14218 /* rtnl_lock is held. */ 14219 case DRV_CTL_START_L2_CMD: { 14220 struct cnic_eth_dev *cp = &bp->cnic_eth_dev; 14221 unsigned long sp_bits = 0; 14222 14223 /* Configure the iSCSI classification object */ 14224 bnx2x_init_mac_obj(bp, &bp->iscsi_l2_mac_obj, 14225 cp->iscsi_l2_client_id, 14226 cp->iscsi_l2_cid, BP_FUNC(bp), 14227 bnx2x_sp(bp, mac_rdata), 14228 bnx2x_sp_mapping(bp, mac_rdata), 14229 BNX2X_FILTER_MAC_PENDING, 14230 &bp->sp_state, BNX2X_OBJ_TYPE_RX, 14231 &bp->macs_pool); 14232 14233 /* Set iSCSI MAC address */ 14234 rc = bnx2x_set_iscsi_eth_mac_addr(bp); 14235 if (rc) 14236 break; 14237 14238 mmiowb(); 14239 barrier(); 14240 14241 /* Start accepting on iSCSI L2 ring */ 14242 14243 netif_addr_lock_bh(dev); 14244 bnx2x_set_iscsi_eth_rx_mode(bp, true); 14245 netif_addr_unlock_bh(dev); 14246 14247 /* bits to wait on */ 14248 __set_bit(BNX2X_FILTER_RX_MODE_PENDING, &sp_bits); 14249 __set_bit(BNX2X_FILTER_ISCSI_ETH_START_SCHED, &sp_bits); 14250 14251 if (!bnx2x_wait_sp_comp(bp, sp_bits)) 14252 BNX2X_ERR("rx_mode completion timed out!\n"); 14253 14254 break; 14255 } 14256 14257 /* rtnl_lock is held. */ 14258 case DRV_CTL_STOP_L2_CMD: { 14259 unsigned long sp_bits = 0; 14260 14261 /* Stop accepting on iSCSI L2 ring */ 14262 netif_addr_lock_bh(dev); 14263 bnx2x_set_iscsi_eth_rx_mode(bp, false); 14264 netif_addr_unlock_bh(dev); 14265 14266 /* bits to wait on */ 14267 __set_bit(BNX2X_FILTER_RX_MODE_PENDING, &sp_bits); 14268 __set_bit(BNX2X_FILTER_ISCSI_ETH_STOP_SCHED, &sp_bits); 14269 14270 if (!bnx2x_wait_sp_comp(bp, sp_bits)) 14271 BNX2X_ERR("rx_mode completion timed out!\n"); 14272 14273 mmiowb(); 14274 barrier(); 14275 14276 /* Unset iSCSI L2 MAC */ 14277 rc = bnx2x_del_all_macs(bp, &bp->iscsi_l2_mac_obj, 14278 BNX2X_ISCSI_ETH_MAC, true); 14279 break; 14280 } 14281 case DRV_CTL_RET_L2_SPQ_CREDIT_CMD: { 14282 int count = ctl->data.credit.credit_count; 14283 14284 smp_mb__before_atomic(); 14285 atomic_add(count, &bp->cq_spq_left); 14286 smp_mb__after_atomic(); 14287 break; 14288 } 14289 case DRV_CTL_ULP_REGISTER_CMD: { 14290 int ulp_type = ctl->data.register_data.ulp_type; 14291 14292 if (CHIP_IS_E3(bp)) { 14293 int idx = BP_FW_MB_IDX(bp); 14294 u32 cap = SHMEM2_RD(bp, drv_capabilities_flag[idx]); 14295 int path = BP_PATH(bp); 14296 int port = BP_PORT(bp); 14297 int i; 14298 u32 scratch_offset; 14299 u32 *host_addr; 14300 14301 /* first write capability to shmem2 */ 14302 if (ulp_type == CNIC_ULP_ISCSI) 14303 cap |= DRV_FLAGS_CAPABILITIES_LOADED_ISCSI; 14304 else if (ulp_type == CNIC_ULP_FCOE) 14305 cap |= DRV_FLAGS_CAPABILITIES_LOADED_FCOE; 14306 SHMEM2_WR(bp, drv_capabilities_flag[idx], cap); 14307 14308 if ((ulp_type != CNIC_ULP_FCOE) || 14309 (!SHMEM2_HAS(bp, ncsi_oem_data_addr)) || 14310 (!(bp->flags & BC_SUPPORTS_FCOE_FEATURES))) 14311 break; 14312 14313 /* if reached here - should write fcoe capabilities */ 14314 scratch_offset = SHMEM2_RD(bp, ncsi_oem_data_addr); 14315 if (!scratch_offset) 14316 break; 14317 scratch_offset += offsetof(struct glob_ncsi_oem_data, 14318 fcoe_features[path][port]); 14319 host_addr = (u32 *) &(ctl->data.register_data. 14320 fcoe_features); 14321 for (i = 0; i < sizeof(struct fcoe_capabilities); 14322 i += 4) 14323 REG_WR(bp, scratch_offset + i, 14324 *(host_addr + i/4)); 14325 } 14326 bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_GET_DRV_VERSION, 0); 14327 break; 14328 } 14329 14330 case DRV_CTL_ULP_UNREGISTER_CMD: { 14331 int ulp_type = ctl->data.ulp_type; 14332 14333 if (CHIP_IS_E3(bp)) { 14334 int idx = BP_FW_MB_IDX(bp); 14335 u32 cap; 14336 14337 cap = SHMEM2_RD(bp, drv_capabilities_flag[idx]); 14338 if (ulp_type == CNIC_ULP_ISCSI) 14339 cap &= ~DRV_FLAGS_CAPABILITIES_LOADED_ISCSI; 14340 else if (ulp_type == CNIC_ULP_FCOE) 14341 cap &= ~DRV_FLAGS_CAPABILITIES_LOADED_FCOE; 14342 SHMEM2_WR(bp, drv_capabilities_flag[idx], cap); 14343 } 14344 bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_GET_DRV_VERSION, 0); 14345 break; 14346 } 14347 14348 default: 14349 BNX2X_ERR("unknown command %x\n", ctl->cmd); 14350 rc = -EINVAL; 14351 } 14352 14353 return rc; 14354} 14355 14356void bnx2x_setup_cnic_irq_info(struct bnx2x *bp) 14357{ 14358 struct cnic_eth_dev *cp = &bp->cnic_eth_dev; 14359 14360 if (bp->flags & USING_MSIX_FLAG) { 14361 cp->drv_state |= CNIC_DRV_STATE_USING_MSIX; 14362 cp->irq_arr[0].irq_flags |= CNIC_IRQ_FL_MSIX; 14363 cp->irq_arr[0].vector = bp->msix_table[1].vector; 14364 } else { 14365 cp->drv_state &= ~CNIC_DRV_STATE_USING_MSIX; 14366 cp->irq_arr[0].irq_flags &= ~CNIC_IRQ_FL_MSIX; 14367 } 14368 if (!CHIP_IS_E1x(bp)) 14369 cp->irq_arr[0].status_blk = (void *)bp->cnic_sb.e2_sb; 14370 else 14371 cp->irq_arr[0].status_blk = (void *)bp->cnic_sb.e1x_sb; 14372 14373 cp->irq_arr[0].status_blk_num = bnx2x_cnic_fw_sb_id(bp); 14374 cp->irq_arr[0].status_blk_num2 = bnx2x_cnic_igu_sb_id(bp); 14375 cp->irq_arr[1].status_blk = bp->def_status_blk; 14376 cp->irq_arr[1].status_blk_num = DEF_SB_ID; 14377 cp->irq_arr[1].status_blk_num2 = DEF_SB_IGU_ID; 14378 14379 cp->num_irq = 2; 14380} 14381 14382void bnx2x_setup_cnic_info(struct bnx2x *bp) 14383{ 14384 struct cnic_eth_dev *cp = &bp->cnic_eth_dev; 14385 14386 cp->ctx_tbl_offset = FUNC_ILT_BASE(BP_FUNC(bp)) + 14387 bnx2x_cid_ilt_lines(bp); 14388 cp->starting_cid = bnx2x_cid_ilt_lines(bp) * ILT_PAGE_CIDS; 14389 cp->fcoe_init_cid = BNX2X_FCOE_ETH_CID(bp); 14390 cp->iscsi_l2_cid = BNX2X_ISCSI_ETH_CID(bp); 14391 14392 DP(NETIF_MSG_IFUP, "BNX2X_1st_NON_L2_ETH_CID(bp) %x, cp->starting_cid %x, cp->fcoe_init_cid %x, cp->iscsi_l2_cid %x\n", 14393 BNX2X_1st_NON_L2_ETH_CID(bp), cp->starting_cid, cp->fcoe_init_cid, 14394 cp->iscsi_l2_cid); 14395 14396 if (NO_ISCSI_OOO(bp)) 14397 cp->drv_state |= CNIC_DRV_STATE_NO_ISCSI_OOO; 14398} 14399 14400static int bnx2x_register_cnic(struct net_device *dev, struct cnic_ops *ops, 14401 void *data) 14402{ 14403 struct bnx2x *bp = netdev_priv(dev); 14404 struct cnic_eth_dev *cp = &bp->cnic_eth_dev; 14405 int rc; 14406 14407 DP(NETIF_MSG_IFUP, "Register_cnic called\n"); 14408 14409 if (ops == NULL) { 14410 BNX2X_ERR("NULL ops received\n"); 14411 return -EINVAL; 14412 } 14413 14414 if (!CNIC_SUPPORT(bp)) { 14415 BNX2X_ERR("Can't register CNIC when not supported\n"); 14416 return -EOPNOTSUPP; 14417 } 14418 14419 if (!CNIC_LOADED(bp)) { 14420 rc = bnx2x_load_cnic(bp); 14421 if (rc) { 14422 BNX2X_ERR("CNIC-related load failed\n"); 14423 return rc; 14424 } 14425 } 14426 14427 bp->cnic_enabled = true; 14428 14429 bp->cnic_kwq = kzalloc(PAGE_SIZE, GFP_KERNEL); 14430 if (!bp->cnic_kwq) 14431 return -ENOMEM; 14432 14433 bp->cnic_kwq_cons = bp->cnic_kwq; 14434 bp->cnic_kwq_prod = bp->cnic_kwq; 14435 bp->cnic_kwq_last = bp->cnic_kwq + MAX_SP_DESC_CNT; 14436 14437 bp->cnic_spq_pending = 0; 14438 bp->cnic_kwq_pending = 0; 14439 14440 bp->cnic_data = data; 14441 14442 cp->num_irq = 0; 14443 cp->drv_state |= CNIC_DRV_STATE_REGD; 14444 cp->iro_arr = bp->iro_arr; 14445 14446 bnx2x_setup_cnic_irq_info(bp); 14447 14448 rcu_assign_pointer(bp->cnic_ops, ops); 14449 14450 /* Schedule driver to read CNIC driver versions */ 14451 bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_GET_DRV_VERSION, 0); 14452 14453 return 0; 14454} 14455 14456static int bnx2x_unregister_cnic(struct net_device *dev) 14457{ 14458 struct bnx2x *bp = netdev_priv(dev); 14459 struct cnic_eth_dev *cp = &bp->cnic_eth_dev; 14460 14461 mutex_lock(&bp->cnic_mutex); 14462 cp->drv_state = 0; 14463 RCU_INIT_POINTER(bp->cnic_ops, NULL); 14464 mutex_unlock(&bp->cnic_mutex); 14465 synchronize_rcu(); 14466 bp->cnic_enabled = false; 14467 kfree(bp->cnic_kwq); 14468 bp->cnic_kwq = NULL; 14469 14470 return 0; 14471} 14472 14473static struct cnic_eth_dev *bnx2x_cnic_probe(struct net_device *dev) 14474{ 14475 struct bnx2x *bp = netdev_priv(dev); 14476 struct cnic_eth_dev *cp = &bp->cnic_eth_dev; 14477 14478 /* If both iSCSI and FCoE are disabled - return NULL in 14479 * order to indicate CNIC that it should not try to work 14480 * with this device. 14481 */ 14482 if (NO_ISCSI(bp) && NO_FCOE(bp)) 14483 return NULL; 14484 14485 cp->drv_owner = THIS_MODULE; 14486 cp->chip_id = CHIP_ID(bp); 14487 cp->pdev = bp->pdev; 14488 cp->io_base = bp->regview; 14489 cp->io_base2 = bp->doorbells; 14490 cp->max_kwqe_pending = 8; 14491 cp->ctx_blk_size = CDU_ILT_PAGE_SZ; 14492 cp->ctx_tbl_offset = FUNC_ILT_BASE(BP_FUNC(bp)) + 14493 bnx2x_cid_ilt_lines(bp); 14494 cp->ctx_tbl_len = CNIC_ILT_LINES; 14495 cp->starting_cid = bnx2x_cid_ilt_lines(bp) * ILT_PAGE_CIDS; 14496 cp->drv_submit_kwqes_16 = bnx2x_cnic_sp_queue; 14497 cp->drv_ctl = bnx2x_drv_ctl; 14498 cp->drv_register_cnic = bnx2x_register_cnic; 14499 cp->drv_unregister_cnic = bnx2x_unregister_cnic; 14500 cp->fcoe_init_cid = BNX2X_FCOE_ETH_CID(bp); 14501 cp->iscsi_l2_client_id = 14502 bnx2x_cnic_eth_cl_id(bp, BNX2X_ISCSI_ETH_CL_ID_IDX); 14503 cp->iscsi_l2_cid = BNX2X_ISCSI_ETH_CID(bp); 14504 14505 if (NO_ISCSI_OOO(bp)) 14506 cp->drv_state |= CNIC_DRV_STATE_NO_ISCSI_OOO; 14507 14508 if (NO_ISCSI(bp)) 14509 cp->drv_state |= CNIC_DRV_STATE_NO_ISCSI; 14510 14511 if (NO_FCOE(bp)) 14512 cp->drv_state |= CNIC_DRV_STATE_NO_FCOE; 14513 14514 BNX2X_DEV_INFO( 14515 "page_size %d, tbl_offset %d, tbl_lines %d, starting cid %d\n", 14516 cp->ctx_blk_size, 14517 cp->ctx_tbl_offset, 14518 cp->ctx_tbl_len, 14519 cp->starting_cid); 14520 return cp; 14521} 14522 14523static u32 bnx2x_rx_ustorm_prods_offset(struct bnx2x_fastpath *fp) 14524{ 14525 struct bnx2x *bp = fp->bp; 14526 u32 offset = BAR_USTRORM_INTMEM; 14527 14528 if (IS_VF(bp)) 14529 return bnx2x_vf_ustorm_prods_offset(bp, fp); 14530 else if (!CHIP_IS_E1x(bp)) 14531 offset += USTORM_RX_PRODS_E2_OFFSET(fp->cl_qzone_id); 14532 else 14533 offset += USTORM_RX_PRODS_E1X_OFFSET(BP_PORT(bp), fp->cl_id); 14534 14535 return offset; 14536} 14537 14538/* called only on E1H or E2. 14539 * When pretending to be PF, the pretend value is the function number 0...7 14540 * When pretending to be VF, the pretend val is the PF-num:VF-valid:ABS-VFID 14541 * combination 14542 */ 14543int bnx2x_pretend_func(struct bnx2x *bp, u16 pretend_func_val) 14544{ 14545 u32 pretend_reg; 14546 14547 if (CHIP_IS_E1H(bp) && pretend_func_val >= E1H_FUNC_MAX) 14548 return -1; 14549 14550 /* get my own pretend register */ 14551 pretend_reg = bnx2x_get_pretend_reg(bp); 14552 REG_WR(bp, pretend_reg, pretend_func_val); 14553 REG_RD(bp, pretend_reg); 14554 return 0; 14555} 14556 14557static void bnx2x_ptp_task(struct work_struct *work) 14558{ 14559 struct bnx2x *bp = container_of(work, struct bnx2x, ptp_task); 14560 int port = BP_PORT(bp); 14561 u32 val_seq; 14562 u64 timestamp, ns; 14563 struct skb_shared_hwtstamps shhwtstamps; 14564 14565 /* Read Tx timestamp registers */ 14566 val_seq = REG_RD(bp, port ? NIG_REG_P1_TLLH_PTP_BUF_SEQID : 14567 NIG_REG_P0_TLLH_PTP_BUF_SEQID); 14568 if (val_seq & 0x10000) { 14569 /* There is a valid timestamp value */ 14570 timestamp = REG_RD(bp, port ? NIG_REG_P1_TLLH_PTP_BUF_TS_MSB : 14571 NIG_REG_P0_TLLH_PTP_BUF_TS_MSB); 14572 timestamp <<= 32; 14573 timestamp |= REG_RD(bp, port ? NIG_REG_P1_TLLH_PTP_BUF_TS_LSB : 14574 NIG_REG_P0_TLLH_PTP_BUF_TS_LSB); 14575 /* Reset timestamp register to allow new timestamp */ 14576 REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_BUF_SEQID : 14577 NIG_REG_P0_TLLH_PTP_BUF_SEQID, 0x10000); 14578 ns = timecounter_cyc2time(&bp->timecounter, timestamp); 14579 14580 memset(&shhwtstamps, 0, sizeof(shhwtstamps)); 14581 shhwtstamps.hwtstamp = ns_to_ktime(ns); 14582 skb_tstamp_tx(bp->ptp_tx_skb, &shhwtstamps); 14583 dev_kfree_skb_any(bp->ptp_tx_skb); 14584 bp->ptp_tx_skb = NULL; 14585 14586 DP(BNX2X_MSG_PTP, "Tx timestamp, timestamp cycles = %llu, ns = %llu\n", 14587 timestamp, ns); 14588 } else { 14589 DP(BNX2X_MSG_PTP, "There is no valid Tx timestamp yet\n"); 14590 /* Reschedule to keep checking for a valid timestamp value */ 14591 schedule_work(&bp->ptp_task); 14592 } 14593} 14594 14595void bnx2x_set_rx_ts(struct bnx2x *bp, struct sk_buff *skb) 14596{ 14597 int port = BP_PORT(bp); 14598 u64 timestamp, ns; 14599 14600 timestamp = REG_RD(bp, port ? NIG_REG_P1_LLH_PTP_HOST_BUF_TS_MSB : 14601 NIG_REG_P0_LLH_PTP_HOST_BUF_TS_MSB); 14602 timestamp <<= 32; 14603 timestamp |= REG_RD(bp, port ? NIG_REG_P1_LLH_PTP_HOST_BUF_TS_LSB : 14604 NIG_REG_P0_LLH_PTP_HOST_BUF_TS_LSB); 14605 14606 /* Reset timestamp register to allow new timestamp */ 14607 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_HOST_BUF_SEQID : 14608 NIG_REG_P0_LLH_PTP_HOST_BUF_SEQID, 0x10000); 14609 14610 ns = timecounter_cyc2time(&bp->timecounter, timestamp); 14611 14612 skb_hwtstamps(skb)->hwtstamp = ns_to_ktime(ns); 14613 14614 DP(BNX2X_MSG_PTP, "Rx timestamp, timestamp cycles = %llu, ns = %llu\n", 14615 timestamp, ns); 14616} 14617 14618/* Read the PHC */ 14619static cycle_t bnx2x_cyclecounter_read(const struct cyclecounter *cc) 14620{ 14621 struct bnx2x *bp = container_of(cc, struct bnx2x, cyclecounter); 14622 int port = BP_PORT(bp); 14623 u32 wb_data[2]; 14624 u64 phc_cycles; 14625 14626 REG_RD_DMAE(bp, port ? NIG_REG_TIMESYNC_GEN_REG + tsgen_synctime_t1 : 14627 NIG_REG_TIMESYNC_GEN_REG + tsgen_synctime_t0, wb_data, 2); 14628 phc_cycles = wb_data[1]; 14629 phc_cycles = (phc_cycles << 32) + wb_data[0]; 14630 14631 DP(BNX2X_MSG_PTP, "PHC read cycles = %llu\n", phc_cycles); 14632 14633 return phc_cycles; 14634} 14635 14636static void bnx2x_init_cyclecounter(struct bnx2x *bp) 14637{ 14638 memset(&bp->cyclecounter, 0, sizeof(bp->cyclecounter)); 14639 bp->cyclecounter.read = bnx2x_cyclecounter_read; 14640 bp->cyclecounter.mask = CYCLECOUNTER_MASK(64); 14641 bp->cyclecounter.shift = 1; 14642 bp->cyclecounter.mult = 1; 14643} 14644 14645static int bnx2x_send_reset_timesync_ramrod(struct bnx2x *bp) 14646{ 14647 struct bnx2x_func_state_params func_params = {NULL}; 14648 struct bnx2x_func_set_timesync_params *set_timesync_params = 14649 &func_params.params.set_timesync; 14650 14651 /* Prepare parameters for function state transitions */ 14652 __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags); 14653 __set_bit(RAMROD_RETRY, &func_params.ramrod_flags); 14654 14655 func_params.f_obj = &bp->func_obj; 14656 func_params.cmd = BNX2X_F_CMD_SET_TIMESYNC; 14657 14658 /* Function parameters */ 14659 set_timesync_params->drift_adjust_cmd = TS_DRIFT_ADJUST_RESET; 14660 set_timesync_params->offset_cmd = TS_OFFSET_KEEP; 14661 14662 return bnx2x_func_state_change(bp, &func_params); 14663} 14664 14665static int bnx2x_enable_ptp_packets(struct bnx2x *bp) 14666{ 14667 struct bnx2x_queue_state_params q_params; 14668 int rc, i; 14669 14670 /* send queue update ramrod to enable PTP packets */ 14671 memset(&q_params, 0, sizeof(q_params)); 14672 __set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags); 14673 q_params.cmd = BNX2X_Q_CMD_UPDATE; 14674 __set_bit(BNX2X_Q_UPDATE_PTP_PKTS_CHNG, 14675 &q_params.params.update.update_flags); 14676 __set_bit(BNX2X_Q_UPDATE_PTP_PKTS, 14677 &q_params.params.update.update_flags); 14678 14679 /* send the ramrod on all the queues of the PF */ 14680 for_each_eth_queue(bp, i) { 14681 struct bnx2x_fastpath *fp = &bp->fp[i]; 14682 14683 /* Set the appropriate Queue object */ 14684 q_params.q_obj = &bnx2x_sp_obj(bp, fp).q_obj; 14685 14686 /* Update the Queue state */ 14687 rc = bnx2x_queue_state_change(bp, &q_params); 14688 if (rc) { 14689 BNX2X_ERR("Failed to enable PTP packets\n"); 14690 return rc; 14691 } 14692 } 14693 14694 return 0; 14695} 14696 14697int bnx2x_configure_ptp_filters(struct bnx2x *bp) 14698{ 14699 int port = BP_PORT(bp); 14700 int rc; 14701 14702 if (!bp->hwtstamp_ioctl_called) 14703 return 0; 14704 14705 switch (bp->tx_type) { 14706 case HWTSTAMP_TX_ON: 14707 bp->flags |= TX_TIMESTAMPING_EN; 14708 REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_PARAM_MASK : 14709 NIG_REG_P0_TLLH_PTP_PARAM_MASK, 0x6AA); 14710 REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_RULE_MASK : 14711 NIG_REG_P0_TLLH_PTP_RULE_MASK, 0x3EEE); 14712 break; 14713 case HWTSTAMP_TX_ONESTEP_SYNC: 14714 BNX2X_ERR("One-step timestamping is not supported\n"); 14715 return -ERANGE; 14716 } 14717 14718 switch (bp->rx_filter) { 14719 case HWTSTAMP_FILTER_NONE: 14720 break; 14721 case HWTSTAMP_FILTER_ALL: 14722 case HWTSTAMP_FILTER_SOME: 14723 bp->rx_filter = HWTSTAMP_FILTER_NONE; 14724 break; 14725 case HWTSTAMP_FILTER_PTP_V1_L4_EVENT: 14726 case HWTSTAMP_FILTER_PTP_V1_L4_SYNC: 14727 case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ: 14728 bp->rx_filter = HWTSTAMP_FILTER_PTP_V1_L4_EVENT; 14729 /* Initialize PTP detection for UDP/IPv4 events */ 14730 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_PARAM_MASK : 14731 NIG_REG_P0_LLH_PTP_PARAM_MASK, 0x7EE); 14732 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_RULE_MASK : 14733 NIG_REG_P0_LLH_PTP_RULE_MASK, 0x3FFE); 14734 break; 14735 case HWTSTAMP_FILTER_PTP_V2_L4_EVENT: 14736 case HWTSTAMP_FILTER_PTP_V2_L4_SYNC: 14737 case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ: 14738 bp->rx_filter = HWTSTAMP_FILTER_PTP_V2_L4_EVENT; 14739 /* Initialize PTP detection for UDP/IPv4 or UDP/IPv6 events */ 14740 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_PARAM_MASK : 14741 NIG_REG_P0_LLH_PTP_PARAM_MASK, 0x7EA); 14742 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_RULE_MASK : 14743 NIG_REG_P0_LLH_PTP_RULE_MASK, 0x3FEE); 14744 break; 14745 case HWTSTAMP_FILTER_PTP_V2_L2_EVENT: 14746 case HWTSTAMP_FILTER_PTP_V2_L2_SYNC: 14747 case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ: 14748 bp->rx_filter = HWTSTAMP_FILTER_PTP_V2_L2_EVENT; 14749 /* Initialize PTP detection L2 events */ 14750 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_PARAM_MASK : 14751 NIG_REG_P0_LLH_PTP_PARAM_MASK, 0x6BF); 14752 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_RULE_MASK : 14753 NIG_REG_P0_LLH_PTP_RULE_MASK, 0x3EFF); 14754 14755 break; 14756 case HWTSTAMP_FILTER_PTP_V2_EVENT: 14757 case HWTSTAMP_FILTER_PTP_V2_SYNC: 14758 case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ: 14759 bp->rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT; 14760 /* Initialize PTP detection L2, UDP/IPv4 or UDP/IPv6 events */ 14761 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_PARAM_MASK : 14762 NIG_REG_P0_LLH_PTP_PARAM_MASK, 0x6AA); 14763 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_RULE_MASK : 14764 NIG_REG_P0_LLH_PTP_RULE_MASK, 0x3EEE); 14765 break; 14766 } 14767 14768 /* Indicate to FW that this PF expects recorded PTP packets */ 14769 rc = bnx2x_enable_ptp_packets(bp); 14770 if (rc) 14771 return rc; 14772 14773 /* Enable sending PTP packets to host */ 14774 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_TO_HOST : 14775 NIG_REG_P0_LLH_PTP_TO_HOST, 0x1); 14776 14777 return 0; 14778} 14779 14780static int bnx2x_hwtstamp_ioctl(struct bnx2x *bp, struct ifreq *ifr) 14781{ 14782 struct hwtstamp_config config; 14783 int rc; 14784 14785 DP(BNX2X_MSG_PTP, "HWTSTAMP IOCTL called\n"); 14786 14787 if (copy_from_user(&config, ifr->ifr_data, sizeof(config))) 14788 return -EFAULT; 14789 14790 DP(BNX2X_MSG_PTP, "Requested tx_type: %d, requested rx_filters = %d\n", 14791 config.tx_type, config.rx_filter); 14792 14793 if (config.flags) { 14794 BNX2X_ERR("config.flags is reserved for future use\n"); 14795 return -EINVAL; 14796 } 14797 14798 bp->hwtstamp_ioctl_called = 1; 14799 bp->tx_type = config.tx_type; 14800 bp->rx_filter = config.rx_filter; 14801 14802 rc = bnx2x_configure_ptp_filters(bp); 14803 if (rc) 14804 return rc; 14805 14806 config.rx_filter = bp->rx_filter; 14807 14808 return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ? 14809 -EFAULT : 0; 14810} 14811 14812/* Configures HW for PTP */ 14813static int bnx2x_configure_ptp(struct bnx2x *bp) 14814{ 14815 int rc, port = BP_PORT(bp); 14816 u32 wb_data[2]; 14817 14818 /* Reset PTP event detection rules - will be configured in the IOCTL */ 14819 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_PARAM_MASK : 14820 NIG_REG_P0_LLH_PTP_PARAM_MASK, 0x7FF); 14821 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_RULE_MASK : 14822 NIG_REG_P0_LLH_PTP_RULE_MASK, 0x3FFF); 14823 REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_PARAM_MASK : 14824 NIG_REG_P0_TLLH_PTP_PARAM_MASK, 0x7FF); 14825 REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_RULE_MASK : 14826 NIG_REG_P0_TLLH_PTP_RULE_MASK, 0x3FFF); 14827 14828 /* Disable PTP packets to host - will be configured in the IOCTL*/ 14829 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_TO_HOST : 14830 NIG_REG_P0_LLH_PTP_TO_HOST, 0x0); 14831 14832 /* Enable the PTP feature */ 14833 REG_WR(bp, port ? NIG_REG_P1_PTP_EN : 14834 NIG_REG_P0_PTP_EN, 0x3F); 14835 14836 /* Enable the free-running counter */ 14837 wb_data[0] = 0; 14838 wb_data[1] = 0; 14839 REG_WR_DMAE(bp, NIG_REG_TIMESYNC_GEN_REG + tsgen_ctrl, wb_data, 2); 14840 14841 /* Reset drift register (offset register is not reset) */ 14842 rc = bnx2x_send_reset_timesync_ramrod(bp); 14843 if (rc) { 14844 BNX2X_ERR("Failed to reset PHC drift register\n"); 14845 return -EFAULT; 14846 } 14847 14848 /* Reset possibly old timestamps */ 14849 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_HOST_BUF_SEQID : 14850 NIG_REG_P0_LLH_PTP_HOST_BUF_SEQID, 0x10000); 14851 REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_BUF_SEQID : 14852 NIG_REG_P0_TLLH_PTP_BUF_SEQID, 0x10000); 14853 14854 return 0; 14855} 14856 14857/* Called during load, to initialize PTP-related stuff */ 14858void bnx2x_init_ptp(struct bnx2x *bp) 14859{ 14860 int rc; 14861 14862 /* Configure PTP in HW */ 14863 rc = bnx2x_configure_ptp(bp); 14864 if (rc) { 14865 BNX2X_ERR("Stopping PTP initialization\n"); 14866 return; 14867 } 14868 14869 /* Init work queue for Tx timestamping */ 14870 INIT_WORK(&bp->ptp_task, bnx2x_ptp_task); 14871 14872 /* Init cyclecounter and timecounter. This is done only in the first 14873 * load. If done in every load, PTP application will fail when doing 14874 * unload / load (e.g. MTU change) while it is running. 14875 */ 14876 if (!bp->timecounter_init_done) { 14877 bnx2x_init_cyclecounter(bp); 14878 timecounter_init(&bp->timecounter, &bp->cyclecounter, 14879 ktime_to_ns(ktime_get_real())); 14880 bp->timecounter_init_done = 1; 14881 } 14882 14883 DP(BNX2X_MSG_PTP, "PTP initialization ended successfully\n"); 14884} 14885