1#ifndef BCM63XX_ENET_H_ 2#define BCM63XX_ENET_H_ 3 4#include <linux/types.h> 5#include <linux/mii.h> 6#include <linux/mutex.h> 7#include <linux/phy.h> 8#include <linux/platform_device.h> 9 10#include <bcm63xx_regs.h> 11#include <bcm63xx_irq.h> 12#include <bcm63xx_io.h> 13#include <bcm63xx_iudma.h> 14 15/* default number of descriptor */ 16#define BCMENET_DEF_RX_DESC 64 17#define BCMENET_DEF_TX_DESC 32 18 19/* maximum burst len for dma (4 bytes unit) */ 20#define BCMENET_DMA_MAXBURST 16 21#define BCMENETSW_DMA_MAXBURST 8 22 23/* tx transmit threshold (4 bytes unit), fifo is 256 bytes, the value 24 * must be low enough so that a DMA transfer of above burst length can 25 * not overflow the fifo */ 26#define BCMENET_TX_FIFO_TRESH 32 27 28/* 29 * hardware maximum rx/tx packet size including FCS, max mtu is 30 * actually 2047, but if we set max rx size register to 2047 we won't 31 * get overflow information if packet size is 2048 or above 32 */ 33#define BCMENET_MAX_MTU 2046 34 35/* 36 * MIB Counters register definitions 37*/ 38#define ETH_MIB_TX_GD_OCTETS 0 39#define ETH_MIB_TX_GD_PKTS 1 40#define ETH_MIB_TX_ALL_OCTETS 2 41#define ETH_MIB_TX_ALL_PKTS 3 42#define ETH_MIB_TX_BRDCAST 4 43#define ETH_MIB_TX_MULT 5 44#define ETH_MIB_TX_64 6 45#define ETH_MIB_TX_65_127 7 46#define ETH_MIB_TX_128_255 8 47#define ETH_MIB_TX_256_511 9 48#define ETH_MIB_TX_512_1023 10 49#define ETH_MIB_TX_1024_MAX 11 50#define ETH_MIB_TX_JAB 12 51#define ETH_MIB_TX_OVR 13 52#define ETH_MIB_TX_FRAG 14 53#define ETH_MIB_TX_UNDERRUN 15 54#define ETH_MIB_TX_COL 16 55#define ETH_MIB_TX_1_COL 17 56#define ETH_MIB_TX_M_COL 18 57#define ETH_MIB_TX_EX_COL 19 58#define ETH_MIB_TX_LATE 20 59#define ETH_MIB_TX_DEF 21 60#define ETH_MIB_TX_CRS 22 61#define ETH_MIB_TX_PAUSE 23 62 63#define ETH_MIB_RX_GD_OCTETS 32 64#define ETH_MIB_RX_GD_PKTS 33 65#define ETH_MIB_RX_ALL_OCTETS 34 66#define ETH_MIB_RX_ALL_PKTS 35 67#define ETH_MIB_RX_BRDCAST 36 68#define ETH_MIB_RX_MULT 37 69#define ETH_MIB_RX_64 38 70#define ETH_MIB_RX_65_127 39 71#define ETH_MIB_RX_128_255 40 72#define ETH_MIB_RX_256_511 41 73#define ETH_MIB_RX_512_1023 42 74#define ETH_MIB_RX_1024_MAX 43 75#define ETH_MIB_RX_JAB 44 76#define ETH_MIB_RX_OVR 45 77#define ETH_MIB_RX_FRAG 46 78#define ETH_MIB_RX_DROP 47 79#define ETH_MIB_RX_CRC_ALIGN 48 80#define ETH_MIB_RX_UND 49 81#define ETH_MIB_RX_CRC 50 82#define ETH_MIB_RX_ALIGN 51 83#define ETH_MIB_RX_SYM 52 84#define ETH_MIB_RX_PAUSE 53 85#define ETH_MIB_RX_CNTRL 54 86 87 88/* 89 * SW MIB Counters register definitions 90*/ 91#define ETHSW_MIB_TX_ALL_OCT 0 92#define ETHSW_MIB_TX_DROP_PKTS 2 93#define ETHSW_MIB_TX_QOS_PKTS 3 94#define ETHSW_MIB_TX_BRDCAST 4 95#define ETHSW_MIB_TX_MULT 5 96#define ETHSW_MIB_TX_UNI 6 97#define ETHSW_MIB_TX_COL 7 98#define ETHSW_MIB_TX_1_COL 8 99#define ETHSW_MIB_TX_M_COL 9 100#define ETHSW_MIB_TX_DEF 10 101#define ETHSW_MIB_TX_LATE 11 102#define ETHSW_MIB_TX_EX_COL 12 103#define ETHSW_MIB_TX_PAUSE 14 104#define ETHSW_MIB_TX_QOS_OCT 15 105 106#define ETHSW_MIB_RX_ALL_OCT 17 107#define ETHSW_MIB_RX_UND 19 108#define ETHSW_MIB_RX_PAUSE 20 109#define ETHSW_MIB_RX_64 21 110#define ETHSW_MIB_RX_65_127 22 111#define ETHSW_MIB_RX_128_255 23 112#define ETHSW_MIB_RX_256_511 24 113#define ETHSW_MIB_RX_512_1023 25 114#define ETHSW_MIB_RX_1024_1522 26 115#define ETHSW_MIB_RX_OVR 27 116#define ETHSW_MIB_RX_JAB 28 117#define ETHSW_MIB_RX_ALIGN 29 118#define ETHSW_MIB_RX_CRC 30 119#define ETHSW_MIB_RX_GD_OCT 31 120#define ETHSW_MIB_RX_DROP 33 121#define ETHSW_MIB_RX_UNI 34 122#define ETHSW_MIB_RX_MULT 35 123#define ETHSW_MIB_RX_BRDCAST 36 124#define ETHSW_MIB_RX_SA_CHANGE 37 125#define ETHSW_MIB_RX_FRAG 38 126#define ETHSW_MIB_RX_OVR_DISC 39 127#define ETHSW_MIB_RX_SYM 40 128#define ETHSW_MIB_RX_QOS_PKTS 41 129#define ETHSW_MIB_RX_QOS_OCT 42 130#define ETHSW_MIB_RX_1523_2047 44 131#define ETHSW_MIB_RX_2048_4095 45 132#define ETHSW_MIB_RX_4096_8191 46 133#define ETHSW_MIB_RX_8192_9728 47 134 135 136struct bcm_enet_mib_counters { 137 u64 tx_gd_octets; 138 u32 tx_gd_pkts; 139 u32 tx_all_octets; 140 u32 tx_all_pkts; 141 u32 tx_unicast; 142 u32 tx_brdcast; 143 u32 tx_mult; 144 u32 tx_64; 145 u32 tx_65_127; 146 u32 tx_128_255; 147 u32 tx_256_511; 148 u32 tx_512_1023; 149 u32 tx_1024_max; 150 u32 tx_1523_2047; 151 u32 tx_2048_4095; 152 u32 tx_4096_8191; 153 u32 tx_8192_9728; 154 u32 tx_jab; 155 u32 tx_drop; 156 u32 tx_ovr; 157 u32 tx_frag; 158 u32 tx_underrun; 159 u32 tx_col; 160 u32 tx_1_col; 161 u32 tx_m_col; 162 u32 tx_ex_col; 163 u32 tx_late; 164 u32 tx_def; 165 u32 tx_crs; 166 u32 tx_pause; 167 u64 rx_gd_octets; 168 u32 rx_gd_pkts; 169 u32 rx_all_octets; 170 u32 rx_all_pkts; 171 u32 rx_brdcast; 172 u32 rx_unicast; 173 u32 rx_mult; 174 u32 rx_64; 175 u32 rx_65_127; 176 u32 rx_128_255; 177 u32 rx_256_511; 178 u32 rx_512_1023; 179 u32 rx_1024_max; 180 u32 rx_jab; 181 u32 rx_ovr; 182 u32 rx_frag; 183 u32 rx_drop; 184 u32 rx_crc_align; 185 u32 rx_und; 186 u32 rx_crc; 187 u32 rx_align; 188 u32 rx_sym; 189 u32 rx_pause; 190 u32 rx_cntrl; 191}; 192 193 194struct bcm_enet_priv { 195 196 /* mac id (from platform device id) */ 197 int mac_id; 198 199 /* base remapped address of device */ 200 void __iomem *base; 201 202 /* mac irq, rx_dma irq, tx_dma irq */ 203 int irq; 204 int irq_rx; 205 int irq_tx; 206 207 /* hw view of rx & tx dma ring */ 208 dma_addr_t rx_desc_dma; 209 dma_addr_t tx_desc_dma; 210 211 /* allocated size (in bytes) for rx & tx dma ring */ 212 unsigned int rx_desc_alloc_size; 213 unsigned int tx_desc_alloc_size; 214 215 216 struct napi_struct napi; 217 218 /* dma channel id for rx */ 219 int rx_chan; 220 221 /* number of dma desc in rx ring */ 222 int rx_ring_size; 223 224 /* cpu view of rx dma ring */ 225 struct bcm_enet_desc *rx_desc_cpu; 226 227 /* current number of armed descriptor given to hardware for rx */ 228 int rx_desc_count; 229 230 /* next rx descriptor to fetch from hardware */ 231 int rx_curr_desc; 232 233 /* next dirty rx descriptor to refill */ 234 int rx_dirty_desc; 235 236 /* size of allocated rx skbs */ 237 unsigned int rx_skb_size; 238 239 /* list of skb given to hw for rx */ 240 struct sk_buff **rx_skb; 241 242 /* used when rx skb allocation failed, so we defer rx queue 243 * refill */ 244 struct timer_list rx_timeout; 245 246 /* lock rx_timeout against rx normal operation */ 247 spinlock_t rx_lock; 248 249 250 /* dma channel id for tx */ 251 int tx_chan; 252 253 /* number of dma desc in tx ring */ 254 int tx_ring_size; 255 256 /* maximum dma burst size */ 257 int dma_maxburst; 258 259 /* cpu view of rx dma ring */ 260 struct bcm_enet_desc *tx_desc_cpu; 261 262 /* number of available descriptor for tx */ 263 int tx_desc_count; 264 265 /* next tx descriptor avaiable */ 266 int tx_curr_desc; 267 268 /* next dirty tx descriptor to reclaim */ 269 int tx_dirty_desc; 270 271 /* list of skb given to hw for tx */ 272 struct sk_buff **tx_skb; 273 274 /* lock used by tx reclaim and xmit */ 275 spinlock_t tx_lock; 276 277 278 /* set if internal phy is ignored and external mii interface 279 * is selected */ 280 int use_external_mii; 281 282 /* set if a phy is connected, phy address must be known, 283 * probing is not possible */ 284 int has_phy; 285 int phy_id; 286 287 /* set if connected phy has an associated irq */ 288 int has_phy_interrupt; 289 int phy_interrupt; 290 291 /* used when a phy is connected (phylib used) */ 292 struct mii_bus *mii_bus; 293 struct phy_device *phydev; 294 int old_link; 295 int old_duplex; 296 int old_pause; 297 298 /* used when no phy is connected */ 299 int force_speed_100; 300 int force_duplex_full; 301 302 /* pause parameters */ 303 int pause_auto; 304 int pause_rx; 305 int pause_tx; 306 307 /* stats */ 308 struct bcm_enet_mib_counters mib; 309 310 /* after mib interrupt, mib registers update is done in this 311 * work queue */ 312 struct work_struct mib_update_task; 313 314 /* lock mib update between userspace request and workqueue */ 315 struct mutex mib_update_lock; 316 317 /* mac clock */ 318 struct clk *mac_clk; 319 320 /* phy clock if internal phy is used */ 321 struct clk *phy_clk; 322 323 /* network device reference */ 324 struct net_device *net_dev; 325 326 /* platform device reference */ 327 struct platform_device *pdev; 328 329 /* maximum hardware transmit/receive size */ 330 unsigned int hw_mtu; 331 332 bool enet_is_sw; 333 334 /* port mapping for switch devices */ 335 int num_ports; 336 struct bcm63xx_enetsw_port used_ports[ENETSW_MAX_PORT]; 337 int sw_port_link[ENETSW_MAX_PORT]; 338 339 /* used to poll switch port state */ 340 struct timer_list swphy_poll; 341 spinlock_t enetsw_mdio_lock; 342 343 /* dma channel enable mask */ 344 u32 dma_chan_en_mask; 345 346 /* dma channel interrupt mask */ 347 u32 dma_chan_int_mask; 348 349 /* DMA engine has internal SRAM */ 350 bool dma_has_sram; 351 352 /* dma channel width */ 353 unsigned int dma_chan_width; 354 355 /* dma descriptor shift value */ 356 unsigned int dma_desc_shift; 357}; 358 359 360#endif /* ! BCM63XX_ENET_H_ */ 361