1#
2# Ethernet LAN device configuration
3#
4
5menuconfig ETHERNET
6	bool "Ethernet driver support"
7	depends on NET
8	default y
9	---help---
10	  This section contains all the Ethernet device drivers.
11
12if ETHERNET
13
14config MDIO
15	tristate
16
17config SUNGEM_PHY
18	tristate
19
20source "drivers/net/ethernet/3com/Kconfig"
21source "drivers/net/ethernet/adaptec/Kconfig"
22source "drivers/net/ethernet/aeroflex/Kconfig"
23source "drivers/net/ethernet/agere/Kconfig"
24source "drivers/net/ethernet/allwinner/Kconfig"
25source "drivers/net/ethernet/alteon/Kconfig"
26source "drivers/net/ethernet/altera/Kconfig"
27source "drivers/net/ethernet/amd/Kconfig"
28source "drivers/net/ethernet/apm/Kconfig"
29source "drivers/net/ethernet/apple/Kconfig"
30source "drivers/net/ethernet/arc/Kconfig"
31source "drivers/net/ethernet/atheros/Kconfig"
32source "drivers/net/ethernet/cadence/Kconfig"
33source "drivers/net/ethernet/adi/Kconfig"
34source "drivers/net/ethernet/broadcom/Kconfig"
35source "drivers/net/ethernet/brocade/Kconfig"
36source "drivers/net/ethernet/calxeda/Kconfig"
37source "drivers/net/ethernet/chelsio/Kconfig"
38source "drivers/net/ethernet/cirrus/Kconfig"
39source "drivers/net/ethernet/cisco/Kconfig"
40
41config CX_ECAT
42	tristate "Beckhoff CX5020 EtherCAT master support"
43	depends on PCI
44	depends on X86 || COMPILE_TEST
45	---help---
46	  Driver for EtherCAT master module located on CCAT FPGA
47	  that can be found on Beckhoff CX5020, and possibly other of CX
48	  Beckhoff CX series industrial PCs.
49
50	  To compile this driver as a module, choose M here. The module
51	  will be called ec_bhf.
52
53source "drivers/net/ethernet/davicom/Kconfig"
54
55config DNET
56	tristate "Dave ethernet support (DNET)"
57	depends on HAS_IOMEM
58	select PHYLIB
59	---help---
60	  The Dave ethernet interface (DNET) is found on Qong Board FPGA.
61	  Say Y to include support for the DNET chip.
62
63	  To compile this driver as a module, choose M here: the module
64	  will be called dnet.
65
66source "drivers/net/ethernet/dec/Kconfig"
67source "drivers/net/ethernet/dlink/Kconfig"
68source "drivers/net/ethernet/emulex/Kconfig"
69source "drivers/net/ethernet/neterion/Kconfig"
70source "drivers/net/ethernet/faraday/Kconfig"
71source "drivers/net/ethernet/freescale/Kconfig"
72source "drivers/net/ethernet/fujitsu/Kconfig"
73source "drivers/net/ethernet/hisilicon/Kconfig"
74source "drivers/net/ethernet/hp/Kconfig"
75source "drivers/net/ethernet/ibm/Kconfig"
76source "drivers/net/ethernet/intel/Kconfig"
77source "drivers/net/ethernet/i825xx/Kconfig"
78source "drivers/net/ethernet/xscale/Kconfig"
79source "drivers/net/ethernet/icplus/Kconfig"
80
81config JME
82	tristate "JMicron(R) PCI-Express Gigabit Ethernet support"
83	depends on PCI
84	select CRC32
85	select MII
86	---help---
87	  This driver supports the PCI-Express gigabit ethernet adapters
88	  based on JMicron JMC250 chipset.
89
90	  To compile this driver as a module, choose M here. The module
91	  will be called jme.
92
93config KORINA
94	tristate "Korina (IDT RC32434) Ethernet support"
95	depends on MIKROTIK_RB532
96	---help---
97	  If you have a Mikrotik RouterBoard 500 or IDT RC32434
98	  based system say Y. Otherwise say N.
99
100config LANTIQ_ETOP
101	tristate "Lantiq SoC ETOP driver"
102	depends on SOC_TYPE_XWAY
103	---help---
104	  Support for the MII0 inside the Lantiq SoC
105
106source "drivers/net/ethernet/marvell/Kconfig"
107source "drivers/net/ethernet/mellanox/Kconfig"
108source "drivers/net/ethernet/micrel/Kconfig"
109source "drivers/net/ethernet/microchip/Kconfig"
110source "drivers/net/ethernet/moxa/Kconfig"
111source "drivers/net/ethernet/myricom/Kconfig"
112
113config FEALNX
114	tristate "Myson MTD-8xx PCI Ethernet support"
115	depends on PCI
116	select CRC32
117	select MII
118	---help---
119	  Say Y here to support the Myson MTD-800 family of PCI-based Ethernet
120	  cards. <http://www.myson.com.tw/>
121
122source "drivers/net/ethernet/natsemi/Kconfig"
123source "drivers/net/ethernet/8390/Kconfig"
124
125config NET_NETX
126	tristate "NetX Ethernet support"
127	select MII
128	depends on ARCH_NETX
129	---help---
130	  This is support for the Hilscher netX builtin Ethernet ports
131
132	  To compile this driver as a module, choose M here. The module
133	  will be called netx-eth.
134
135source "drivers/net/ethernet/nuvoton/Kconfig"
136source "drivers/net/ethernet/nvidia/Kconfig"
137source "drivers/net/ethernet/nxp/Kconfig"
138source "drivers/net/ethernet/octeon/Kconfig"
139source "drivers/net/ethernet/oki-semi/Kconfig"
140
141config ETHOC
142	tristate "OpenCores 10/100 Mbps Ethernet MAC support"
143	depends on HAS_IOMEM && HAS_DMA
144	select MII
145	select PHYLIB
146	select CRC32
147	select BITREVERSE
148	---help---
149	  Say Y here if you want to use the OpenCores 10/100 Mbps Ethernet MAC.
150
151source "drivers/net/ethernet/packetengines/Kconfig"
152source "drivers/net/ethernet/pasemi/Kconfig"
153source "drivers/net/ethernet/qlogic/Kconfig"
154source "drivers/net/ethernet/qualcomm/Kconfig"
155source "drivers/net/ethernet/realtek/Kconfig"
156source "drivers/net/ethernet/renesas/Kconfig"
157source "drivers/net/ethernet/rdc/Kconfig"
158source "drivers/net/ethernet/rocker/Kconfig"
159source "drivers/net/ethernet/samsung/Kconfig"
160source "drivers/net/ethernet/seeq/Kconfig"
161source "drivers/net/ethernet/silan/Kconfig"
162source "drivers/net/ethernet/sis/Kconfig"
163source "drivers/net/ethernet/sfc/Kconfig"
164source "drivers/net/ethernet/sgi/Kconfig"
165source "drivers/net/ethernet/smsc/Kconfig"
166source "drivers/net/ethernet/stmicro/Kconfig"
167source "drivers/net/ethernet/sun/Kconfig"
168source "drivers/net/ethernet/tehuti/Kconfig"
169source "drivers/net/ethernet/ti/Kconfig"
170source "drivers/net/ethernet/tile/Kconfig"
171source "drivers/net/ethernet/toshiba/Kconfig"
172source "drivers/net/ethernet/tundra/Kconfig"
173source "drivers/net/ethernet/via/Kconfig"
174source "drivers/net/ethernet/wiznet/Kconfig"
175source "drivers/net/ethernet/xilinx/Kconfig"
176source "drivers/net/ethernet/xircom/Kconfig"
177
178endif # ETHERNET
179