1/* 2 * amd76xrom.c 3 * 4 * Normal mappings of chips in physical memory 5 */ 6 7#include <linux/module.h> 8#include <linux/types.h> 9#include <linux/kernel.h> 10#include <linux/init.h> 11#include <linux/slab.h> 12#include <asm/io.h> 13#include <linux/mtd/mtd.h> 14#include <linux/mtd/map.h> 15#include <linux/mtd/cfi.h> 16#include <linux/mtd/flashchip.h> 17#include <linux/pci.h> 18#include <linux/pci_ids.h> 19#include <linux/list.h> 20 21 22#define xstr(s) str(s) 23#define str(s) #s 24#define MOD_NAME xstr(KBUILD_BASENAME) 25 26#define ADDRESS_NAME_LEN 18 27 28#define ROM_PROBE_STEP_SIZE (64*1024) /* 64KiB */ 29 30struct amd76xrom_window { 31 void __iomem *virt; 32 unsigned long phys; 33 unsigned long size; 34 struct list_head maps; 35 struct resource rsrc; 36 struct pci_dev *pdev; 37}; 38 39struct amd76xrom_map_info { 40 struct list_head list; 41 struct map_info map; 42 struct mtd_info *mtd; 43 struct resource rsrc; 44 char map_name[sizeof(MOD_NAME) + 2 + ADDRESS_NAME_LEN]; 45}; 46 47/* The 2 bits controlling the window size are often set to allow reading 48 * the BIOS, but too small to allow writing, since the lock registers are 49 * 4MiB lower in the address space than the data. 50 * 51 * This is intended to prevent flashing the bios, perhaps accidentally. 52 * 53 * This parameter allows the normal driver to over-ride the BIOS settings. 54 * 55 * The bits are 6 and 7. If both bits are set, it is a 5MiB window. 56 * If only the 7 Bit is set, it is a 4MiB window. Otherwise, a 57 * 64KiB window. 58 * 59 */ 60static uint win_size_bits; 61module_param(win_size_bits, uint, 0); 62MODULE_PARM_DESC(win_size_bits, "ROM window size bits override for 0x43 byte, normally set by BIOS."); 63 64static struct amd76xrom_window amd76xrom_window = { 65 .maps = LIST_HEAD_INIT(amd76xrom_window.maps), 66}; 67 68static void amd76xrom_cleanup(struct amd76xrom_window *window) 69{ 70 struct amd76xrom_map_info *map, *scratch; 71 u8 byte; 72 73 if (window->pdev) { 74 /* Disable writes through the rom window */ 75 pci_read_config_byte(window->pdev, 0x40, &byte); 76 pci_write_config_byte(window->pdev, 0x40, byte & ~1); 77 pci_dev_put(window->pdev); 78 } 79 80 /* Free all of the mtd devices */ 81 list_for_each_entry_safe(map, scratch, &window->maps, list) { 82 if (map->rsrc.parent) { 83 release_resource(&map->rsrc); 84 } 85 mtd_device_unregister(map->mtd); 86 map_destroy(map->mtd); 87 list_del(&map->list); 88 kfree(map); 89 } 90 if (window->rsrc.parent) 91 release_resource(&window->rsrc); 92 93 if (window->virt) { 94 iounmap(window->virt); 95 window->virt = NULL; 96 window->phys = 0; 97 window->size = 0; 98 window->pdev = NULL; 99 } 100} 101 102 103static int amd76xrom_init_one(struct pci_dev *pdev, 104 const struct pci_device_id *ent) 105{ 106 static char *rom_probe_types[] = { "cfi_probe", "jedec_probe", NULL }; 107 u8 byte; 108 struct amd76xrom_window *window = &amd76xrom_window; 109 struct amd76xrom_map_info *map = NULL; 110 unsigned long map_top; 111 112 /* Remember the pci dev I find the window in - already have a ref */ 113 window->pdev = pdev; 114 115 /* Enable the selected rom window. This is often incorrectly 116 * set up by the BIOS, and the 4MiB offset for the lock registers 117 * requires the full 5MiB of window space. 118 * 119 * This 'write, then read' approach leaves the bits for 120 * other uses of the hardware info. 121 */ 122 pci_read_config_byte(pdev, 0x43, &byte); 123 pci_write_config_byte(pdev, 0x43, byte | win_size_bits ); 124 125 /* Assume the rom window is properly setup, and find it's size */ 126 pci_read_config_byte(pdev, 0x43, &byte); 127 if ((byte & ((1<<7)|(1<<6))) == ((1<<7)|(1<<6))) { 128 window->phys = 0xffb00000; /* 5MiB */ 129 } 130 else if ((byte & (1<<7)) == (1<<7)) { 131 window->phys = 0xffc00000; /* 4MiB */ 132 } 133 else { 134 window->phys = 0xffff0000; /* 64KiB */ 135 } 136 window->size = 0xffffffffUL - window->phys + 1UL; 137 138 /* 139 * Try to reserve the window mem region. If this fails then 140 * it is likely due to a fragment of the window being 141 * "reseved" by the BIOS. In the case that the 142 * request_mem_region() fails then once the rom size is 143 * discovered we will try to reserve the unreserved fragment. 144 */ 145 window->rsrc.name = MOD_NAME; 146 window->rsrc.start = window->phys; 147 window->rsrc.end = window->phys + window->size - 1; 148 window->rsrc.flags = IORESOURCE_MEM | IORESOURCE_BUSY; 149 if (request_resource(&iomem_resource, &window->rsrc)) { 150 window->rsrc.parent = NULL; 151 printk(KERN_ERR MOD_NAME 152 " %s(): Unable to register resource %pR - kernel bug?\n", 153 __func__, &window->rsrc); 154 return -EBUSY; 155 } 156 157 158 /* Enable writes through the rom window */ 159 pci_read_config_byte(pdev, 0x40, &byte); 160 pci_write_config_byte(pdev, 0x40, byte | 1); 161 162 /* FIXME handle registers 0x80 - 0x8C the bios region locks */ 163 164 /* For write accesses caches are useless */ 165 window->virt = ioremap_nocache(window->phys, window->size); 166 if (!window->virt) { 167 printk(KERN_ERR MOD_NAME ": ioremap(%08lx, %08lx) failed\n", 168 window->phys, window->size); 169 goto out; 170 } 171 172 /* Get the first address to look for an rom chip at */ 173 map_top = window->phys; 174#if 1 175 /* The probe sequence run over the firmware hub lock 176 * registers sets them to 0x7 (no access). 177 * Probe at most the last 4M of the address space. 178 */ 179 if (map_top < 0xffc00000) { 180 map_top = 0xffc00000; 181 } 182#endif 183 /* Loop through and look for rom chips */ 184 while((map_top - 1) < 0xffffffffUL) { 185 struct cfi_private *cfi; 186 unsigned long offset; 187 int i; 188 189 if (!map) { 190 map = kmalloc(sizeof(*map), GFP_KERNEL); 191 } 192 if (!map) { 193 printk(KERN_ERR MOD_NAME ": kmalloc failed"); 194 goto out; 195 } 196 memset(map, 0, sizeof(*map)); 197 INIT_LIST_HEAD(&map->list); 198 map->map.name = map->map_name; 199 map->map.phys = map_top; 200 offset = map_top - window->phys; 201 map->map.virt = (void __iomem *) 202 (((unsigned long)(window->virt)) + offset); 203 map->map.size = 0xffffffffUL - map_top + 1UL; 204 /* Set the name of the map to the address I am trying */ 205 sprintf(map->map_name, "%s @%08Lx", 206 MOD_NAME, (unsigned long long)map->map.phys); 207 208 /* There is no generic VPP support */ 209 for(map->map.bankwidth = 32; map->map.bankwidth; 210 map->map.bankwidth >>= 1) 211 { 212 char **probe_type; 213 /* Skip bankwidths that are not supported */ 214 if (!map_bankwidth_supported(map->map.bankwidth)) 215 continue; 216 217 /* Setup the map methods */ 218 simple_map_init(&map->map); 219 220 /* Try all of the probe methods */ 221 probe_type = rom_probe_types; 222 for(; *probe_type; probe_type++) { 223 map->mtd = do_map_probe(*probe_type, &map->map); 224 if (map->mtd) 225 goto found; 226 } 227 } 228 map_top += ROM_PROBE_STEP_SIZE; 229 continue; 230 found: 231 /* Trim the size if we are larger than the map */ 232 if (map->mtd->size > map->map.size) { 233 printk(KERN_WARNING MOD_NAME 234 " rom(%llu) larger than window(%lu). fixing...\n", 235 (unsigned long long)map->mtd->size, map->map.size); 236 map->mtd->size = map->map.size; 237 } 238 if (window->rsrc.parent) { 239 /* 240 * Registering the MTD device in iomem may not be possible 241 * if there is a BIOS "reserved" and BUSY range. If this 242 * fails then continue anyway. 243 */ 244 map->rsrc.name = map->map_name; 245 map->rsrc.start = map->map.phys; 246 map->rsrc.end = map->map.phys + map->mtd->size - 1; 247 map->rsrc.flags = IORESOURCE_MEM | IORESOURCE_BUSY; 248 if (request_resource(&window->rsrc, &map->rsrc)) { 249 printk(KERN_ERR MOD_NAME 250 ": cannot reserve MTD resource\n"); 251 map->rsrc.parent = NULL; 252 } 253 } 254 255 /* Make the whole region visible in the map */ 256 map->map.virt = window->virt; 257 map->map.phys = window->phys; 258 cfi = map->map.fldrv_priv; 259 for(i = 0; i < cfi->numchips; i++) { 260 cfi->chips[i].start += offset; 261 } 262 263 /* Now that the mtd devices is complete claim and export it */ 264 map->mtd->owner = THIS_MODULE; 265 if (mtd_device_register(map->mtd, NULL, 0)) { 266 map_destroy(map->mtd); 267 map->mtd = NULL; 268 goto out; 269 } 270 271 272 /* Calculate the new value of map_top */ 273 map_top += map->mtd->size; 274 275 /* File away the map structure */ 276 list_add(&map->list, &window->maps); 277 map = NULL; 278 } 279 280 out: 281 /* Free any left over map structures */ 282 kfree(map); 283 /* See if I have any map structures */ 284 if (list_empty(&window->maps)) { 285 amd76xrom_cleanup(window); 286 return -ENODEV; 287 } 288 return 0; 289} 290 291 292static void amd76xrom_remove_one(struct pci_dev *pdev) 293{ 294 struct amd76xrom_window *window = &amd76xrom_window; 295 296 amd76xrom_cleanup(window); 297} 298 299static struct pci_device_id amd76xrom_pci_tbl[] = { 300 { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7410, 301 PCI_ANY_ID, PCI_ANY_ID, }, 302 { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7440, 303 PCI_ANY_ID, PCI_ANY_ID, }, 304 { PCI_VENDOR_ID_AMD, 0x7468 }, /* amd8111 support */ 305 { 0, } 306}; 307 308MODULE_DEVICE_TABLE(pci, amd76xrom_pci_tbl); 309 310#if 0 311static struct pci_driver amd76xrom_driver = { 312 .name = MOD_NAME, 313 .id_table = amd76xrom_pci_tbl, 314 .probe = amd76xrom_init_one, 315 .remove = amd76xrom_remove_one, 316}; 317#endif 318 319static int __init init_amd76xrom(void) 320{ 321 struct pci_dev *pdev; 322 struct pci_device_id *id; 323 pdev = NULL; 324 for(id = amd76xrom_pci_tbl; id->vendor; id++) { 325 pdev = pci_get_device(id->vendor, id->device, NULL); 326 if (pdev) { 327 break; 328 } 329 } 330 if (pdev) { 331 return amd76xrom_init_one(pdev, &amd76xrom_pci_tbl[0]); 332 } 333 return -ENXIO; 334#if 0 335 return pci_register_driver(&amd76xrom_driver); 336#endif 337} 338 339static void __exit cleanup_amd76xrom(void) 340{ 341 amd76xrom_remove_one(amd76xrom_window.pdev); 342} 343 344module_init(init_amd76xrom); 345module_exit(cleanup_amd76xrom); 346 347MODULE_LICENSE("GPL"); 348MODULE_AUTHOR("Eric Biederman <ebiederman@lnxi.com>"); 349MODULE_DESCRIPTION("MTD map driver for BIOS chips on the AMD76X southbridge"); 350