1/* 2 * linux/drivers/char/hpilo.h 3 * 4 * Copyright (C) 2008 Hewlett-Packard Development Company, L.P. 5 * David Altobelli <david.altobelli@hp.com> 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License version 2 as 9 * published by the Free Software Foundation. 10 */ 11#ifndef __HPILO_H 12#define __HPILO_H 13 14#define ILO_NAME "hpilo" 15 16/* max number of open channel control blocks per device, hw limited to 32 */ 17#define MAX_CCB 24 18/* min number of open channel control blocks per device, hw limited to 32 */ 19#define MIN_CCB 8 20/* max number of supported devices */ 21#define MAX_ILO_DEV 1 22/* max number of files */ 23#define MAX_OPEN (MAX_CCB * MAX_ILO_DEV) 24/* total wait time in usec */ 25#define MAX_WAIT_TIME 10000 26/* per spin wait time in usec */ 27#define WAIT_TIME 10 28/* spin counter for open/close delay */ 29#define MAX_WAIT (MAX_WAIT_TIME / WAIT_TIME) 30 31/* 32 * Per device, used to track global memory allocations. 33 */ 34struct ilo_hwinfo { 35 /* mmio registers on device */ 36 char __iomem *mmio_vaddr; 37 38 /* doorbell registers on device */ 39 char __iomem *db_vaddr; 40 41 /* shared memory on device used for channel control blocks */ 42 char __iomem *ram_vaddr; 43 44 /* files corresponding to this device */ 45 struct ccb_data *ccb_alloc[MAX_CCB]; 46 47 struct pci_dev *ilo_dev; 48 49 /* 50 * open_lock serializes ccb_cnt during open and close 51 * [ irq disabled ] 52 * -> alloc_lock used when adding/removing/searching ccb_alloc, 53 * which represents all ccbs open on the device 54 * --> fifo_lock controls access to fifo queues shared with hw 55 * 56 * Locks must be taken in this order, but open_lock and alloc_lock 57 * are optional, they do not need to be held in order to take a 58 * lower level lock. 59 */ 60 spinlock_t open_lock; 61 spinlock_t alloc_lock; 62 spinlock_t fifo_lock; 63 64 struct cdev cdev; 65}; 66 67/* offset from mmio_vaddr for enabling doorbell interrupts */ 68#define DB_IRQ 0xB2 69/* offset from mmio_vaddr for outbound communications */ 70#define DB_OUT 0xD4 71/* DB_OUT reset bit */ 72#define DB_RESET 26 73 74/* 75 * Channel control block. Used to manage hardware queues. 76 * The format must match hw's version. The hw ccb is 128 bytes, 77 * but the context area shouldn't be touched by the driver. 78 */ 79#define ILOSW_CCB_SZ 64 80#define ILOHW_CCB_SZ 128 81struct ccb { 82 union { 83 char *send_fifobar; 84 u64 send_fifobar_pa; 85 } ccb_u1; 86 union { 87 char *send_desc; 88 u64 send_desc_pa; 89 } ccb_u2; 90 u64 send_ctrl; 91 92 union { 93 char *recv_fifobar; 94 u64 recv_fifobar_pa; 95 } ccb_u3; 96 union { 97 char *recv_desc; 98 u64 recv_desc_pa; 99 } ccb_u4; 100 u64 recv_ctrl; 101 102 union { 103 char __iomem *db_base; 104 u64 padding5; 105 } ccb_u5; 106 107 u64 channel; 108 109 /* unused context area (64 bytes) */ 110}; 111 112/* ccb queue parameters */ 113#define SENDQ 1 114#define RECVQ 2 115#define NR_QENTRY 4 116#define L2_QENTRY_SZ 12 117 118/* ccb ctrl bitfields */ 119#define CTRL_BITPOS_L2SZ 0 120#define CTRL_BITPOS_FIFOINDEXMASK 4 121#define CTRL_BITPOS_DESCLIMIT 18 122#define CTRL_BITPOS_A 30 123#define CTRL_BITPOS_G 31 124 125/* ccb doorbell macros */ 126#define L2_DB_SIZE 14 127#define ONE_DB_SIZE (1 << L2_DB_SIZE) 128 129/* 130 * Per fd structure used to track the ccb allocated to that dev file. 131 */ 132struct ccb_data { 133 /* software version of ccb, using virtual addrs */ 134 struct ccb driver_ccb; 135 136 /* hardware version of ccb, using physical addrs */ 137 struct ccb ilo_ccb; 138 139 /* hardware ccb is written to this shared mapped device memory */ 140 struct ccb __iomem *mapped_ccb; 141 142 /* dma'able memory used for send/recv queues */ 143 void *dma_va; 144 dma_addr_t dma_pa; 145 size_t dma_size; 146 147 /* pointer to hardware device info */ 148 struct ilo_hwinfo *ilo_hw; 149 150 /* queue for this ccb to wait for recv data */ 151 wait_queue_head_t ccb_waitq; 152 153 /* usage count, to allow for shared ccb's */ 154 int ccb_cnt; 155 156 /* open wanted exclusive access to this ccb */ 157 int ccb_excl; 158}; 159 160/* 161 * FIFO queue structure, shared with hw. 162 */ 163#define ILO_START_ALIGN 4096 164#define ILO_CACHE_SZ 128 165struct fifo { 166 u64 nrents; /* user requested number of fifo entries */ 167 u64 imask; /* mask to extract valid fifo index */ 168 u64 merge; /* O/C bits to merge in during enqueue operation */ 169 u64 reset; /* set to non-zero when the target device resets */ 170 u8 pad_0[ILO_CACHE_SZ - (sizeof(u64) * 4)]; 171 172 u64 head; 173 u8 pad_1[ILO_CACHE_SZ - (sizeof(u64))]; 174 175 u64 tail; 176 u8 pad_2[ILO_CACHE_SZ - (sizeof(u64))]; 177 178 u64 fifobar[1]; 179}; 180 181/* convert between struct fifo, and the fifobar, which is saved in the ccb */ 182#define FIFOHANDLESIZE (sizeof(struct fifo) - sizeof(u64)) 183#define FIFOBARTOHANDLE(_fifo) \ 184 ((struct fifo *)(((char *)(_fifo)) - FIFOHANDLESIZE)) 185 186/* the number of qwords to consume from the entry descriptor */ 187#define ENTRY_BITPOS_QWORDS 0 188/* descriptor index number (within a specified queue) */ 189#define ENTRY_BITPOS_DESCRIPTOR 10 190/* state bit, fifo entry consumed by consumer */ 191#define ENTRY_BITPOS_C 22 192/* state bit, fifo entry is occupied */ 193#define ENTRY_BITPOS_O 23 194 195#define ENTRY_BITS_QWORDS 10 196#define ENTRY_BITS_DESCRIPTOR 12 197#define ENTRY_BITS_C 1 198#define ENTRY_BITS_O 1 199#define ENTRY_BITS_TOTAL \ 200 (ENTRY_BITS_C + ENTRY_BITS_O + \ 201 ENTRY_BITS_QWORDS + ENTRY_BITS_DESCRIPTOR) 202 203/* extract various entry fields */ 204#define ENTRY_MASK ((1 << ENTRY_BITS_TOTAL) - 1) 205#define ENTRY_MASK_C (((1 << ENTRY_BITS_C) - 1) << ENTRY_BITPOS_C) 206#define ENTRY_MASK_O (((1 << ENTRY_BITS_O) - 1) << ENTRY_BITPOS_O) 207#define ENTRY_MASK_QWORDS \ 208 (((1 << ENTRY_BITS_QWORDS) - 1) << ENTRY_BITPOS_QWORDS) 209#define ENTRY_MASK_DESCRIPTOR \ 210 (((1 << ENTRY_BITS_DESCRIPTOR) - 1) << ENTRY_BITPOS_DESCRIPTOR) 211 212#define ENTRY_MASK_NOSTATE (ENTRY_MASK >> (ENTRY_BITS_C + ENTRY_BITS_O)) 213 214#endif /* __HPILO_H */ 215