1/* 2 * linux/drivers/i2c/chips/twl4030-power.c 3 * 4 * Handle TWL4030 Power initialization 5 * 6 * Copyright (C) 2008 Nokia Corporation 7 * Copyright (C) 2006 Texas Instruments, Inc 8 * 9 * Written by Kalle Jokiniemi 10 * Peter De Schrijver <peter.de-schrijver@nokia.com> 11 * Several fixes by Amit Kucheria <amit.kucheria@verdurent.com> 12 * 13 * This file is subject to the terms and conditions of the GNU General 14 * Public License. See the file "COPYING" in the main directory of this 15 * archive for more details. 16 * 17 * This program is distributed in the hope that it will be useful, 18 * but WITHOUT ANY WARRANTY; without even the implied warranty of 19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 20 * GNU General Public License for more details. 21 * 22 * You should have received a copy of the GNU General Public License 23 * along with this program; if not, write to the Free Software 24 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 25 */ 26 27#include <linux/module.h> 28#include <linux/pm.h> 29#include <linux/i2c/twl.h> 30#include <linux/platform_device.h> 31#include <linux/of.h> 32#include <linux/of_device.h> 33 34#include <asm/mach-types.h> 35 36static u8 twl4030_start_script_address = 0x2b; 37 38/* Register bits for P1, P2 and P3_SW_EVENTS */ 39#define PWR_STOPON_PRWON BIT(6) 40#define PWR_STOPON_SYSEN BIT(5) 41#define PWR_ENABLE_WARMRESET BIT(4) 42#define PWR_LVL_WAKEUP BIT(3) 43#define PWR_DEVACT BIT(2) 44#define PWR_DEVSLP BIT(1) 45#define PWR_DEVOFF BIT(0) 46 47/* Register bits for CFG_P1_TRANSITION (also for P2 and P3) */ 48#define STARTON_SWBUG BIT(7) /* Start on watchdog */ 49#define STARTON_VBUS BIT(5) /* Start on VBUS */ 50#define STARTON_VBAT BIT(4) /* Start on battery insert */ 51#define STARTON_RTC BIT(3) /* Start on RTC */ 52#define STARTON_USB BIT(2) /* Start on USB host */ 53#define STARTON_CHG BIT(1) /* Start on charger */ 54#define STARTON_PWON BIT(0) /* Start on PWRON button */ 55 56#define SEQ_OFFSYNC (1 << 0) 57 58#define PHY_TO_OFF_PM_MASTER(p) (p - 0x36) 59#define PHY_TO_OFF_PM_RECEIVER(p) (p - 0x5b) 60 61/* resource - hfclk */ 62#define R_HFCLKOUT_DEV_GRP PHY_TO_OFF_PM_RECEIVER(0xe6) 63 64/* PM events */ 65#define R_P1_SW_EVENTS PHY_TO_OFF_PM_MASTER(0x46) 66#define R_P2_SW_EVENTS PHY_TO_OFF_PM_MASTER(0x47) 67#define R_P3_SW_EVENTS PHY_TO_OFF_PM_MASTER(0x48) 68#define R_CFG_P1_TRANSITION PHY_TO_OFF_PM_MASTER(0x36) 69#define R_CFG_P2_TRANSITION PHY_TO_OFF_PM_MASTER(0x37) 70#define R_CFG_P3_TRANSITION PHY_TO_OFF_PM_MASTER(0x38) 71 72#define END_OF_SCRIPT 0x3f 73 74#define R_SEQ_ADD_A2S PHY_TO_OFF_PM_MASTER(0x55) 75#define R_SEQ_ADD_S2A12 PHY_TO_OFF_PM_MASTER(0x56) 76#define R_SEQ_ADD_S2A3 PHY_TO_OFF_PM_MASTER(0x57) 77#define R_SEQ_ADD_WARM PHY_TO_OFF_PM_MASTER(0x58) 78#define R_MEMORY_ADDRESS PHY_TO_OFF_PM_MASTER(0x59) 79#define R_MEMORY_DATA PHY_TO_OFF_PM_MASTER(0x5a) 80 81/* resource configuration registers 82 <RESOURCE>_DEV_GRP at address 'n+0' 83 <RESOURCE>_TYPE at address 'n+1' 84 <RESOURCE>_REMAP at address 'n+2' 85 <RESOURCE>_DEDICATED at address 'n+3' 86*/ 87#define DEV_GRP_OFFSET 0 88#define TYPE_OFFSET 1 89#define REMAP_OFFSET 2 90#define DEDICATED_OFFSET 3 91 92/* Bit positions in the registers */ 93 94/* <RESOURCE>_DEV_GRP */ 95#define DEV_GRP_SHIFT 5 96#define DEV_GRP_MASK (7 << DEV_GRP_SHIFT) 97 98/* <RESOURCE>_TYPE */ 99#define TYPE_SHIFT 0 100#define TYPE_MASK (7 << TYPE_SHIFT) 101#define TYPE2_SHIFT 3 102#define TYPE2_MASK (3 << TYPE2_SHIFT) 103 104/* <RESOURCE>_REMAP */ 105#define SLEEP_STATE_SHIFT 0 106#define SLEEP_STATE_MASK (0xf << SLEEP_STATE_SHIFT) 107#define OFF_STATE_SHIFT 4 108#define OFF_STATE_MASK (0xf << OFF_STATE_SHIFT) 109 110static u8 res_config_addrs[] = { 111 [RES_VAUX1] = 0x17, 112 [RES_VAUX2] = 0x1b, 113 [RES_VAUX3] = 0x1f, 114 [RES_VAUX4] = 0x23, 115 [RES_VMMC1] = 0x27, 116 [RES_VMMC2] = 0x2b, 117 [RES_VPLL1] = 0x2f, 118 [RES_VPLL2] = 0x33, 119 [RES_VSIM] = 0x37, 120 [RES_VDAC] = 0x3b, 121 [RES_VINTANA1] = 0x3f, 122 [RES_VINTANA2] = 0x43, 123 [RES_VINTDIG] = 0x47, 124 [RES_VIO] = 0x4b, 125 [RES_VDD1] = 0x55, 126 [RES_VDD2] = 0x63, 127 [RES_VUSB_1V5] = 0x71, 128 [RES_VUSB_1V8] = 0x74, 129 [RES_VUSB_3V1] = 0x77, 130 [RES_VUSBCP] = 0x7a, 131 [RES_REGEN] = 0x7f, 132 [RES_NRES_PWRON] = 0x82, 133 [RES_CLKEN] = 0x85, 134 [RES_SYSEN] = 0x88, 135 [RES_HFCLKOUT] = 0x8b, 136 [RES_32KCLKOUT] = 0x8e, 137 [RES_RESET] = 0x91, 138 [RES_MAIN_REF] = 0x94, 139}; 140 141/* 142 * Usable values for .remap_sleep and .remap_off 143 * Based on table "5.3.3 Resource Operating modes" 144 */ 145enum { 146 TWL_REMAP_OFF = 0, 147 TWL_REMAP_SLEEP = 8, 148 TWL_REMAP_ACTIVE = 9, 149}; 150 151/* 152 * Macros to configure the PM register states for various resources. 153 * Note that we can make MSG_SINGULAR etc private to this driver once 154 * omap3 has been made DT only. 155 */ 156#define TWL_DFLT_DELAY 2 /* typically 2 32 KiHz cycles */ 157#define TWL_DEV_GRP_P123 (DEV_GRP_P1 | DEV_GRP_P2 | DEV_GRP_P3) 158#define TWL_RESOURCE_SET(res, state) \ 159 { MSG_SINGULAR(DEV_GRP_NULL, (res), (state)), TWL_DFLT_DELAY } 160#define TWL_RESOURCE_ON(res) TWL_RESOURCE_SET(res, RES_STATE_ACTIVE) 161#define TWL_RESOURCE_OFF(res) TWL_RESOURCE_SET(res, RES_STATE_OFF) 162#define TWL_RESOURCE_RESET(res) TWL_RESOURCE_SET(res, RES_STATE_WRST) 163/* 164 * It seems that type1 and type2 is just the resource init order 165 * number for the type1 and type2 group. 166 */ 167#define TWL_RESOURCE_SET_ACTIVE(res, state) \ 168 { MSG_SINGULAR(DEV_GRP_NULL, (res), RES_STATE_ACTIVE), (state) } 169#define TWL_RESOURCE_GROUP_RESET(group, type1, type2) \ 170 { MSG_BROADCAST(DEV_GRP_NULL, (group), (type1), (type2), \ 171 RES_STATE_WRST), TWL_DFLT_DELAY } 172#define TWL_RESOURCE_GROUP_SLEEP(group, type, type2) \ 173 { MSG_BROADCAST(DEV_GRP_NULL, (group), (type), (type2), \ 174 RES_STATE_SLEEP), TWL_DFLT_DELAY } 175#define TWL_RESOURCE_GROUP_ACTIVE(group, type, type2) \ 176 { MSG_BROADCAST(DEV_GRP_NULL, (group), (type), (type2), \ 177 RES_STATE_ACTIVE), TWL_DFLT_DELAY } 178#define TWL_REMAP_SLEEP(res, devgrp, typ, typ2) \ 179 { .resource = (res), .devgroup = (devgrp), \ 180 .type = (typ), .type2 = (typ2), \ 181 .remap_off = TWL_REMAP_OFF, \ 182 .remap_sleep = TWL_REMAP_SLEEP, } 183#define TWL_REMAP_OFF(res, devgrp, typ, typ2) \ 184 { .resource = (res), .devgroup = (devgrp), \ 185 .type = (typ), .type2 = (typ2), \ 186 .remap_off = TWL_REMAP_OFF, .remap_sleep = TWL_REMAP_OFF, } 187 188static int twl4030_write_script_byte(u8 address, u8 byte) 189{ 190 int err; 191 192 err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, address, R_MEMORY_ADDRESS); 193 if (err) 194 goto out; 195 err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, byte, R_MEMORY_DATA); 196out: 197 return err; 198} 199 200static int twl4030_write_script_ins(u8 address, u16 pmb_message, 201 u8 delay, u8 next) 202{ 203 int err; 204 205 address *= 4; 206 err = twl4030_write_script_byte(address++, pmb_message >> 8); 207 if (err) 208 goto out; 209 err = twl4030_write_script_byte(address++, pmb_message & 0xff); 210 if (err) 211 goto out; 212 err = twl4030_write_script_byte(address++, delay); 213 if (err) 214 goto out; 215 err = twl4030_write_script_byte(address++, next); 216out: 217 return err; 218} 219 220static int twl4030_write_script(u8 address, struct twl4030_ins *script, 221 int len) 222{ 223 int err = -EINVAL; 224 225 for (; len; len--, address++, script++) { 226 if (len == 1) { 227 err = twl4030_write_script_ins(address, 228 script->pmb_message, 229 script->delay, 230 END_OF_SCRIPT); 231 if (err) 232 break; 233 } else { 234 err = twl4030_write_script_ins(address, 235 script->pmb_message, 236 script->delay, 237 address + 1); 238 if (err) 239 break; 240 } 241 } 242 return err; 243} 244 245static int twl4030_config_wakeup3_sequence(u8 address) 246{ 247 int err; 248 u8 data; 249 250 /* Set SLEEP to ACTIVE SEQ address for P3 */ 251 err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, address, R_SEQ_ADD_S2A3); 252 if (err) 253 goto out; 254 255 /* P3 LVL_WAKEUP should be on LEVEL */ 256 err = twl_i2c_read_u8(TWL_MODULE_PM_MASTER, &data, R_P3_SW_EVENTS); 257 if (err) 258 goto out; 259 data |= PWR_LVL_WAKEUP; 260 err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, data, R_P3_SW_EVENTS); 261out: 262 if (err) 263 pr_err("TWL4030 wakeup sequence for P3 config error\n"); 264 return err; 265} 266 267static int twl4030_config_wakeup12_sequence(u8 address) 268{ 269 int err = 0; 270 u8 data; 271 272 /* Set SLEEP to ACTIVE SEQ address for P1 and P2 */ 273 err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, address, R_SEQ_ADD_S2A12); 274 if (err) 275 goto out; 276 277 /* P1/P2 LVL_WAKEUP should be on LEVEL */ 278 err = twl_i2c_read_u8(TWL_MODULE_PM_MASTER, &data, R_P1_SW_EVENTS); 279 if (err) 280 goto out; 281 282 data |= PWR_LVL_WAKEUP; 283 err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, data, R_P1_SW_EVENTS); 284 if (err) 285 goto out; 286 287 err = twl_i2c_read_u8(TWL_MODULE_PM_MASTER, &data, R_P2_SW_EVENTS); 288 if (err) 289 goto out; 290 291 data |= PWR_LVL_WAKEUP; 292 err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, data, R_P2_SW_EVENTS); 293 if (err) 294 goto out; 295 296 if (machine_is_omap_3430sdp() || machine_is_omap_ldp()) { 297 /* Disabling AC charger effect on sleep-active transitions */ 298 err = twl_i2c_read_u8(TWL_MODULE_PM_MASTER, &data, 299 R_CFG_P1_TRANSITION); 300 if (err) 301 goto out; 302 data &= ~(1<<1); 303 err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, data, 304 R_CFG_P1_TRANSITION); 305 if (err) 306 goto out; 307 } 308 309out: 310 if (err) 311 pr_err("TWL4030 wakeup sequence for P1 and P2" \ 312 "config error\n"); 313 return err; 314} 315 316static int twl4030_config_sleep_sequence(u8 address) 317{ 318 int err; 319 320 /* Set ACTIVE to SLEEP SEQ address in T2 memory*/ 321 err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, address, R_SEQ_ADD_A2S); 322 323 if (err) 324 pr_err("TWL4030 sleep sequence config error\n"); 325 326 return err; 327} 328 329static int twl4030_config_warmreset_sequence(u8 address) 330{ 331 int err; 332 u8 rd_data; 333 334 /* Set WARM RESET SEQ address for P1 */ 335 err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, address, R_SEQ_ADD_WARM); 336 if (err) 337 goto out; 338 339 /* P1/P2/P3 enable WARMRESET */ 340 err = twl_i2c_read_u8(TWL_MODULE_PM_MASTER, &rd_data, R_P1_SW_EVENTS); 341 if (err) 342 goto out; 343 344 rd_data |= PWR_ENABLE_WARMRESET; 345 err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, rd_data, R_P1_SW_EVENTS); 346 if (err) 347 goto out; 348 349 err = twl_i2c_read_u8(TWL_MODULE_PM_MASTER, &rd_data, R_P2_SW_EVENTS); 350 if (err) 351 goto out; 352 353 rd_data |= PWR_ENABLE_WARMRESET; 354 err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, rd_data, R_P2_SW_EVENTS); 355 if (err) 356 goto out; 357 358 err = twl_i2c_read_u8(TWL_MODULE_PM_MASTER, &rd_data, R_P3_SW_EVENTS); 359 if (err) 360 goto out; 361 362 rd_data |= PWR_ENABLE_WARMRESET; 363 err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, rd_data, R_P3_SW_EVENTS); 364out: 365 if (err) 366 pr_err("TWL4030 warmreset seq config error\n"); 367 return err; 368} 369 370static int twl4030_configure_resource(struct twl4030_resconfig *rconfig) 371{ 372 int rconfig_addr; 373 int err; 374 u8 type; 375 u8 grp; 376 u8 remap; 377 378 if (rconfig->resource > TOTAL_RESOURCES) { 379 pr_err("TWL4030 Resource %d does not exist\n", 380 rconfig->resource); 381 return -EINVAL; 382 } 383 384 rconfig_addr = res_config_addrs[rconfig->resource]; 385 386 /* Set resource group */ 387 err = twl_i2c_read_u8(TWL_MODULE_PM_RECEIVER, &grp, 388 rconfig_addr + DEV_GRP_OFFSET); 389 if (err) { 390 pr_err("TWL4030 Resource %d group could not be read\n", 391 rconfig->resource); 392 return err; 393 } 394 395 if (rconfig->devgroup != TWL4030_RESCONFIG_UNDEF) { 396 grp &= ~DEV_GRP_MASK; 397 grp |= rconfig->devgroup << DEV_GRP_SHIFT; 398 err = twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 399 grp, rconfig_addr + DEV_GRP_OFFSET); 400 if (err < 0) { 401 pr_err("TWL4030 failed to program devgroup\n"); 402 return err; 403 } 404 } 405 406 /* Set resource types */ 407 err = twl_i2c_read_u8(TWL_MODULE_PM_RECEIVER, &type, 408 rconfig_addr + TYPE_OFFSET); 409 if (err < 0) { 410 pr_err("TWL4030 Resource %d type could not be read\n", 411 rconfig->resource); 412 return err; 413 } 414 415 if (rconfig->type != TWL4030_RESCONFIG_UNDEF) { 416 type &= ~TYPE_MASK; 417 type |= rconfig->type << TYPE_SHIFT; 418 } 419 420 if (rconfig->type2 != TWL4030_RESCONFIG_UNDEF) { 421 type &= ~TYPE2_MASK; 422 type |= rconfig->type2 << TYPE2_SHIFT; 423 } 424 425 err = twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 426 type, rconfig_addr + TYPE_OFFSET); 427 if (err < 0) { 428 pr_err("TWL4030 failed to program resource type\n"); 429 return err; 430 } 431 432 /* Set remap states */ 433 err = twl_i2c_read_u8(TWL_MODULE_PM_RECEIVER, &remap, 434 rconfig_addr + REMAP_OFFSET); 435 if (err < 0) { 436 pr_err("TWL4030 Resource %d remap could not be read\n", 437 rconfig->resource); 438 return err; 439 } 440 441 if (rconfig->remap_off != TWL4030_RESCONFIG_UNDEF) { 442 remap &= ~OFF_STATE_MASK; 443 remap |= rconfig->remap_off << OFF_STATE_SHIFT; 444 } 445 446 if (rconfig->remap_sleep != TWL4030_RESCONFIG_UNDEF) { 447 remap &= ~SLEEP_STATE_MASK; 448 remap |= rconfig->remap_sleep << SLEEP_STATE_SHIFT; 449 } 450 451 err = twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 452 remap, 453 rconfig_addr + REMAP_OFFSET); 454 if (err < 0) { 455 pr_err("TWL4030 failed to program remap\n"); 456 return err; 457 } 458 459 return 0; 460} 461 462static int load_twl4030_script(struct twl4030_script *tscript, 463 u8 address) 464{ 465 int err; 466 static int order; 467 468 /* Make sure the script isn't going beyond last valid address (0x3f) */ 469 if ((address + tscript->size) > END_OF_SCRIPT) { 470 pr_err("TWL4030 scripts too big error\n"); 471 return -EINVAL; 472 } 473 474 err = twl4030_write_script(address, tscript->script, tscript->size); 475 if (err) 476 goto out; 477 478 if (tscript->flags & TWL4030_WRST_SCRIPT) { 479 err = twl4030_config_warmreset_sequence(address); 480 if (err) 481 goto out; 482 } 483 if (tscript->flags & TWL4030_WAKEUP12_SCRIPT) { 484 /* Reset any existing sleep script to avoid hangs on reboot */ 485 err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, END_OF_SCRIPT, 486 R_SEQ_ADD_A2S); 487 if (err) 488 goto out; 489 490 err = twl4030_config_wakeup12_sequence(address); 491 if (err) 492 goto out; 493 order = 1; 494 } 495 if (tscript->flags & TWL4030_WAKEUP3_SCRIPT) { 496 err = twl4030_config_wakeup3_sequence(address); 497 if (err) 498 goto out; 499 } 500 if (tscript->flags & TWL4030_SLEEP_SCRIPT) { 501 if (!order) 502 pr_warning("TWL4030: Bad order of scripts (sleep "\ 503 "script before wakeup) Leads to boot"\ 504 "failure on some boards\n"); 505 err = twl4030_config_sleep_sequence(address); 506 } 507out: 508 return err; 509} 510 511int twl4030_remove_script(u8 flags) 512{ 513 int err = 0; 514 515 err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG1, 516 TWL4030_PM_MASTER_PROTECT_KEY); 517 if (err) { 518 pr_err("twl4030: unable to unlock PROTECT_KEY\n"); 519 return err; 520 } 521 522 err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG2, 523 TWL4030_PM_MASTER_PROTECT_KEY); 524 if (err) { 525 pr_err("twl4030: unable to unlock PROTECT_KEY\n"); 526 return err; 527 } 528 529 if (flags & TWL4030_WRST_SCRIPT) { 530 err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, END_OF_SCRIPT, 531 R_SEQ_ADD_WARM); 532 if (err) 533 return err; 534 } 535 if (flags & TWL4030_WAKEUP12_SCRIPT) { 536 err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, END_OF_SCRIPT, 537 R_SEQ_ADD_S2A12); 538 if (err) 539 return err; 540 } 541 if (flags & TWL4030_WAKEUP3_SCRIPT) { 542 err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, END_OF_SCRIPT, 543 R_SEQ_ADD_S2A3); 544 if (err) 545 return err; 546 } 547 if (flags & TWL4030_SLEEP_SCRIPT) { 548 err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, END_OF_SCRIPT, 549 R_SEQ_ADD_A2S); 550 if (err) 551 return err; 552 } 553 554 err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, 0, 555 TWL4030_PM_MASTER_PROTECT_KEY); 556 if (err) 557 pr_err("TWL4030 Unable to relock registers\n"); 558 559 return err; 560} 561 562static int 563twl4030_power_configure_scripts(const struct twl4030_power_data *pdata) 564{ 565 int err; 566 int i; 567 u8 address = twl4030_start_script_address; 568 569 for (i = 0; i < pdata->num; i++) { 570 err = load_twl4030_script(pdata->scripts[i], address); 571 if (err) 572 return err; 573 address += pdata->scripts[i]->size; 574 } 575 576 return 0; 577} 578 579static void twl4030_patch_rconfig(struct twl4030_resconfig *common, 580 struct twl4030_resconfig *board) 581{ 582 while (common->resource) { 583 struct twl4030_resconfig *b = board; 584 585 while (b->resource) { 586 if (b->resource == common->resource) { 587 *common = *b; 588 break; 589 } 590 b++; 591 } 592 common++; 593 } 594} 595 596static int 597twl4030_power_configure_resources(const struct twl4030_power_data *pdata) 598{ 599 struct twl4030_resconfig *resconfig = pdata->resource_config; 600 struct twl4030_resconfig *boardconf = pdata->board_config; 601 int err; 602 603 if (resconfig) { 604 if (boardconf) 605 twl4030_patch_rconfig(resconfig, boardconf); 606 607 while (resconfig->resource) { 608 err = twl4030_configure_resource(resconfig); 609 if (err) 610 return err; 611 resconfig++; 612 } 613 } 614 615 return 0; 616} 617 618static int twl4030_starton_mask_and_set(u8 bitmask, u8 bitvalues) 619{ 620 u8 regs[3] = { TWL4030_PM_MASTER_CFG_P1_TRANSITION, 621 TWL4030_PM_MASTER_CFG_P2_TRANSITION, 622 TWL4030_PM_MASTER_CFG_P3_TRANSITION, }; 623 u8 val; 624 int i, err; 625 626 err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG1, 627 TWL4030_PM_MASTER_PROTECT_KEY); 628 if (err) 629 goto relock; 630 err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, 631 TWL4030_PM_MASTER_KEY_CFG2, 632 TWL4030_PM_MASTER_PROTECT_KEY); 633 if (err) 634 goto relock; 635 636 for (i = 0; i < sizeof(regs); i++) { 637 err = twl_i2c_read_u8(TWL_MODULE_PM_MASTER, 638 &val, regs[i]); 639 if (err) 640 break; 641 val = (~bitmask & val) | (bitmask & bitvalues); 642 err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, 643 val, regs[i]); 644 if (err) 645 break; 646 } 647 648 if (err) 649 pr_err("TWL4030 Register access failed: %i\n", err); 650 651relock: 652 return twl_i2c_write_u8(TWL_MODULE_PM_MASTER, 0, 653 TWL4030_PM_MASTER_PROTECT_KEY); 654} 655 656/* 657 * In master mode, start the power off sequence. 658 * After a successful execution, TWL shuts down the power to the SoC 659 * and all peripherals connected to it. 660 */ 661void twl4030_power_off(void) 662{ 663 int err; 664 665 /* Disable start on charger or VBUS as it can break poweroff */ 666 err = twl4030_starton_mask_and_set(STARTON_VBUS | STARTON_CHG, 0); 667 if (err) 668 pr_err("TWL4030 Unable to configure start-up\n"); 669 670 err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, PWR_DEVOFF, 671 TWL4030_PM_MASTER_P1_SW_EVENTS); 672 if (err) 673 pr_err("TWL4030 Unable to power off\n"); 674} 675 676static bool twl4030_power_use_poweroff(const struct twl4030_power_data *pdata, 677 struct device_node *node) 678{ 679 if (pdata && pdata->use_poweroff) 680 return true; 681 682 if (of_property_read_bool(node, "ti,system-power-controller")) 683 return true; 684 685 if (of_property_read_bool(node, "ti,use_poweroff")) 686 return true; 687 688 return false; 689} 690 691#ifdef CONFIG_OF 692 693/* Generic warm reset configuration for omap3 */ 694 695static struct twl4030_ins omap3_wrst_seq[] = { 696 TWL_RESOURCE_OFF(RES_NRES_PWRON), 697 TWL_RESOURCE_OFF(RES_RESET), 698 TWL_RESOURCE_RESET(RES_MAIN_REF), 699 TWL_RESOURCE_GROUP_RESET(RES_GRP_ALL, RES_TYPE_R0, RES_TYPE2_R2), 700 TWL_RESOURCE_RESET(RES_VUSB_3V1), 701 TWL_RESOURCE_GROUP_RESET(RES_GRP_ALL, RES_TYPE_R0, RES_TYPE2_R1), 702 TWL_RESOURCE_GROUP_RESET(RES_GRP_RC, RES_TYPE_ALL, RES_TYPE2_R0), 703 TWL_RESOURCE_ON(RES_RESET), 704 TWL_RESOURCE_ON(RES_NRES_PWRON), 705}; 706 707static struct twl4030_script omap3_wrst_script = { 708 .script = omap3_wrst_seq, 709 .size = ARRAY_SIZE(omap3_wrst_seq), 710 .flags = TWL4030_WRST_SCRIPT, 711}; 712 713static struct twl4030_script *omap3_reset_scripts[] = { 714 &omap3_wrst_script, 715}; 716 717static struct twl4030_resconfig omap3_rconfig[] = { 718 TWL_REMAP_SLEEP(RES_HFCLKOUT, DEV_GRP_P3, -1, -1), 719 TWL_REMAP_SLEEP(RES_VDD1, DEV_GRP_P1, -1, -1), 720 TWL_REMAP_SLEEP(RES_VDD2, DEV_GRP_P1, -1, -1), 721 { 0, 0 }, 722}; 723 724static struct twl4030_power_data omap3_reset = { 725 .scripts = omap3_reset_scripts, 726 .num = ARRAY_SIZE(omap3_reset_scripts), 727 .resource_config = omap3_rconfig, 728}; 729 730/* Recommended generic default idle configuration for off-idle */ 731 732/* Broadcast message to put res to sleep */ 733static struct twl4030_ins omap3_idle_sleep_on_seq[] = { 734 TWL_RESOURCE_GROUP_SLEEP(RES_GRP_ALL, RES_TYPE_ALL, 0), 735}; 736 737static struct twl4030_script omap3_idle_sleep_on_script = { 738 .script = omap3_idle_sleep_on_seq, 739 .size = ARRAY_SIZE(omap3_idle_sleep_on_seq), 740 .flags = TWL4030_SLEEP_SCRIPT, 741}; 742 743/* Broadcast message to put res to active */ 744static struct twl4030_ins omap3_idle_wakeup_p12_seq[] = { 745 TWL_RESOURCE_GROUP_ACTIVE(RES_GRP_ALL, RES_TYPE_ALL, 0), 746}; 747 748static struct twl4030_script omap3_idle_wakeup_p12_script = { 749 .script = omap3_idle_wakeup_p12_seq, 750 .size = ARRAY_SIZE(omap3_idle_wakeup_p12_seq), 751 .flags = TWL4030_WAKEUP12_SCRIPT, 752}; 753 754/* Broadcast message to put res to active */ 755static struct twl4030_ins omap3_idle_wakeup_p3_seq[] = { 756 TWL_RESOURCE_SET_ACTIVE(RES_CLKEN, 0x37), 757 TWL_RESOURCE_GROUP_ACTIVE(RES_GRP_ALL, RES_TYPE_ALL, 0), 758}; 759 760static struct twl4030_script omap3_idle_wakeup_p3_script = { 761 .script = omap3_idle_wakeup_p3_seq, 762 .size = ARRAY_SIZE(omap3_idle_wakeup_p3_seq), 763 .flags = TWL4030_WAKEUP3_SCRIPT, 764}; 765 766static struct twl4030_script *omap3_idle_scripts[] = { 767 &omap3_idle_wakeup_p12_script, 768 &omap3_idle_wakeup_p3_script, 769 &omap3_wrst_script, 770 &omap3_idle_sleep_on_script, 771}; 772 773/* 774 * Recommended configuration based on "Recommended Sleep 775 * Sequences for the Zoom Platform": 776 * http://omappedia.com/wiki/File:Recommended_Sleep_Sequences_Zoom.pdf 777 * Note that the type1 and type2 seem to be just the init order number 778 * for type1 and type2 groups as specified in the document mentioned 779 * above. 780 */ 781static struct twl4030_resconfig omap3_idle_rconfig[] = { 782 TWL_REMAP_SLEEP(RES_VAUX1, TWL4030_RESCONFIG_UNDEF, 0, 0), 783 TWL_REMAP_SLEEP(RES_VAUX2, TWL4030_RESCONFIG_UNDEF, 0, 0), 784 TWL_REMAP_SLEEP(RES_VAUX3, TWL4030_RESCONFIG_UNDEF, 0, 0), 785 TWL_REMAP_SLEEP(RES_VAUX4, TWL4030_RESCONFIG_UNDEF, 0, 0), 786 TWL_REMAP_SLEEP(RES_VMMC1, TWL4030_RESCONFIG_UNDEF, 0, 0), 787 TWL_REMAP_SLEEP(RES_VMMC2, TWL4030_RESCONFIG_UNDEF, 0, 0), 788 TWL_REMAP_OFF(RES_VPLL1, DEV_GRP_P1, 3, 1), 789 TWL_REMAP_SLEEP(RES_VPLL2, DEV_GRP_P1, 0, 0), 790 TWL_REMAP_SLEEP(RES_VSIM, TWL4030_RESCONFIG_UNDEF, 0, 0), 791 TWL_REMAP_SLEEP(RES_VDAC, TWL4030_RESCONFIG_UNDEF, 0, 0), 792 TWL_REMAP_SLEEP(RES_VINTANA1, TWL_DEV_GRP_P123, 1, 2), 793 TWL_REMAP_SLEEP(RES_VINTANA2, TWL_DEV_GRP_P123, 0, 2), 794 TWL_REMAP_SLEEP(RES_VINTDIG, TWL_DEV_GRP_P123, 1, 2), 795 TWL_REMAP_SLEEP(RES_VIO, TWL_DEV_GRP_P123, 2, 2), 796 TWL_REMAP_OFF(RES_VDD1, DEV_GRP_P1, 4, 1), 797 TWL_REMAP_OFF(RES_VDD2, DEV_GRP_P1, 3, 1), 798 TWL_REMAP_SLEEP(RES_VUSB_1V5, TWL4030_RESCONFIG_UNDEF, 0, 0), 799 TWL_REMAP_SLEEP(RES_VUSB_1V8, TWL4030_RESCONFIG_UNDEF, 0, 0), 800 TWL_REMAP_SLEEP(RES_VUSB_3V1, TWL_DEV_GRP_P123, 0, 0), 801 /* Resource #20 USB charge pump skipped */ 802 TWL_REMAP_SLEEP(RES_REGEN, TWL_DEV_GRP_P123, 2, 1), 803 TWL_REMAP_SLEEP(RES_NRES_PWRON, TWL_DEV_GRP_P123, 0, 1), 804 TWL_REMAP_SLEEP(RES_CLKEN, TWL_DEV_GRP_P123, 3, 2), 805 TWL_REMAP_SLEEP(RES_SYSEN, TWL_DEV_GRP_P123, 6, 1), 806 TWL_REMAP_SLEEP(RES_HFCLKOUT, DEV_GRP_P3, 0, 2), 807 TWL_REMAP_SLEEP(RES_32KCLKOUT, TWL_DEV_GRP_P123, 0, 0), 808 TWL_REMAP_SLEEP(RES_RESET, TWL_DEV_GRP_P123, 6, 0), 809 TWL_REMAP_SLEEP(RES_MAIN_REF, TWL_DEV_GRP_P123, 0, 0), 810 { /* Terminator */ }, 811}; 812 813static struct twl4030_power_data omap3_idle = { 814 .scripts = omap3_idle_scripts, 815 .num = ARRAY_SIZE(omap3_idle_scripts), 816 .resource_config = omap3_idle_rconfig, 817}; 818 819/* Disable 32 KiHz oscillator during idle */ 820static struct twl4030_resconfig osc_off_rconfig[] = { 821 TWL_REMAP_OFF(RES_CLKEN, DEV_GRP_P1 | DEV_GRP_P3, 3, 2), 822 { /* Terminator */ }, 823}; 824 825static struct twl4030_power_data osc_off_idle = { 826 .scripts = omap3_idle_scripts, 827 .num = ARRAY_SIZE(omap3_idle_scripts), 828 .resource_config = omap3_idle_rconfig, 829 .board_config = osc_off_rconfig, 830}; 831 832static const struct of_device_id twl4030_power_of_match[] = { 833 { 834 .compatible = "ti,twl4030-power", 835 }, 836 { 837 .compatible = "ti,twl4030-power-reset", 838 .data = &omap3_reset, 839 }, 840 { 841 .compatible = "ti,twl4030-power-idle", 842 .data = &omap3_idle, 843 }, 844 { 845 .compatible = "ti,twl4030-power-idle-osc-off", 846 .data = &osc_off_idle, 847 }, 848 { }, 849}; 850MODULE_DEVICE_TABLE(of, twl4030_power_of_match); 851#endif /* CONFIG_OF */ 852 853static int twl4030_power_probe(struct platform_device *pdev) 854{ 855 const struct twl4030_power_data *pdata = dev_get_platdata(&pdev->dev); 856 struct device_node *node = pdev->dev.of_node; 857 const struct of_device_id *match; 858 int err = 0; 859 int err2 = 0; 860 u8 val; 861 862 if (!pdata && !node) { 863 dev_err(&pdev->dev, "Platform data is missing\n"); 864 return -EINVAL; 865 } 866 867 err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG1, 868 TWL4030_PM_MASTER_PROTECT_KEY); 869 err |= twl_i2c_write_u8(TWL_MODULE_PM_MASTER, 870 TWL4030_PM_MASTER_KEY_CFG2, 871 TWL4030_PM_MASTER_PROTECT_KEY); 872 873 if (err) { 874 pr_err("TWL4030 Unable to unlock registers\n"); 875 return err; 876 } 877 878 match = of_match_device(of_match_ptr(twl4030_power_of_match), 879 &pdev->dev); 880 if (match && match->data) 881 pdata = match->data; 882 883 if (pdata) { 884 err = twl4030_power_configure_scripts(pdata); 885 if (err) { 886 pr_err("TWL4030 failed to load scripts\n"); 887 goto relock; 888 } 889 err = twl4030_power_configure_resources(pdata); 890 if (err) { 891 pr_err("TWL4030 failed to configure resource\n"); 892 goto relock; 893 } 894 } 895 896 /* Board has to be wired properly to use this feature */ 897 if (twl4030_power_use_poweroff(pdata, node) && !pm_power_off) { 898 /* Default for SEQ_OFFSYNC is set, lets ensure this */ 899 err = twl_i2c_read_u8(TWL_MODULE_PM_MASTER, &val, 900 TWL4030_PM_MASTER_CFG_P123_TRANSITION); 901 if (err) { 902 pr_warning("TWL4030 Unable to read registers\n"); 903 904 } else if (!(val & SEQ_OFFSYNC)) { 905 val |= SEQ_OFFSYNC; 906 err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, val, 907 TWL4030_PM_MASTER_CFG_P123_TRANSITION); 908 if (err) { 909 pr_err("TWL4030 Unable to setup SEQ_OFFSYNC\n"); 910 goto relock; 911 } 912 } 913 914 pm_power_off = twl4030_power_off; 915 } 916 917relock: 918 err2 = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, 0, 919 TWL4030_PM_MASTER_PROTECT_KEY); 920 if (err2) { 921 pr_err("TWL4030 Unable to relock registers\n"); 922 return err2; 923 } 924 925 return err; 926} 927 928static int twl4030_power_remove(struct platform_device *pdev) 929{ 930 return 0; 931} 932 933static struct platform_driver twl4030_power_driver = { 934 .driver = { 935 .name = "twl4030_power", 936 .of_match_table = of_match_ptr(twl4030_power_of_match), 937 }, 938 .probe = twl4030_power_probe, 939 .remove = twl4030_power_remove, 940}; 941 942module_platform_driver(twl4030_power_driver); 943 944MODULE_AUTHOR("Nokia Corporation"); 945MODULE_AUTHOR("Texas Instruments, Inc."); 946MODULE_DESCRIPTION("Power management for TWL4030"); 947MODULE_LICENSE("GPL"); 948MODULE_ALIAS("platform:twl4030_power"); 949