1/* 2 * GemTek radio card driver 3 * 4 * Copyright 1998 Jonas Munsin <jmunsin@iki.fi> 5 * 6 * GemTek hasn't released any specs on the card, so the protocol had to 7 * be reverse engineered with dosemu. 8 * 9 * Besides the protocol changes, this is mostly a copy of: 10 * 11 * RadioTrack II driver for Linux radio support (C) 1998 Ben Pfaff 12 * 13 * Based on RadioTrack I/RadioReveal (C) 1997 M. Kirkwood 14 * Converted to new API by Alan Cox <alan@lxorguk.ukuu.org.uk> 15 * Various bugfixes and enhancements by Russell Kroll <rkroll@exploits.org> 16 * 17 * Converted to the radio-isa framework by Hans Verkuil <hans.verkuil@cisco.com> 18 * Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@infradead.org> 19 * 20 * Note: this card seems to swap the left and right audio channels! 21 * 22 * Fully tested with the Keene USB FM Transmitter and the v4l2-compliance tool. 23 */ 24 25#include <linux/module.h> /* Modules */ 26#include <linux/init.h> /* Initdata */ 27#include <linux/ioport.h> /* request_region */ 28#include <linux/delay.h> /* udelay */ 29#include <linux/videodev2.h> /* kernel radio structs */ 30#include <linux/mutex.h> 31#include <linux/io.h> /* outb, outb_p */ 32#include <linux/pnp.h> 33#include <linux/slab.h> 34#include <media/v4l2-ioctl.h> 35#include <media/v4l2-device.h> 36#include "radio-isa.h" 37 38/* 39 * Module info. 40 */ 41 42MODULE_AUTHOR("Jonas Munsin, Pekka Seppänen <pexu@kapsi.fi>"); 43MODULE_DESCRIPTION("A driver for the GemTek Radio card."); 44MODULE_LICENSE("GPL"); 45MODULE_VERSION("1.0.0"); 46 47/* 48 * Module params. 49 */ 50 51#ifndef CONFIG_RADIO_GEMTEK_PORT 52#define CONFIG_RADIO_GEMTEK_PORT -1 53#endif 54#ifndef CONFIG_RADIO_GEMTEK_PROBE 55#define CONFIG_RADIO_GEMTEK_PROBE 1 56#endif 57 58#define GEMTEK_MAX 4 59 60static bool probe = CONFIG_RADIO_GEMTEK_PROBE; 61static bool hardmute; 62static int io[GEMTEK_MAX] = { [0] = CONFIG_RADIO_GEMTEK_PORT, 63 [1 ... (GEMTEK_MAX - 1)] = -1 }; 64static int radio_nr[GEMTEK_MAX] = { [0 ... (GEMTEK_MAX - 1)] = -1 }; 65 66module_param(probe, bool, 0444); 67MODULE_PARM_DESC(probe, "Enable automatic device probing."); 68 69module_param(hardmute, bool, 0644); 70MODULE_PARM_DESC(hardmute, "Enable 'hard muting' by shutting down PLL, may " 71 "reduce static noise."); 72 73module_param_array(io, int, NULL, 0444); 74MODULE_PARM_DESC(io, "Force I/O ports for the GemTek Radio card if automatic " 75 "probing is disabled or fails. The most common I/O ports are: 0x20c " 76 "0x30c, 0x24c or 0x34c (0x20c, 0x248 and 0x28c have been reported to " 77 "work for the combined sound/radiocard)."); 78 79module_param_array(radio_nr, int, NULL, 0444); 80MODULE_PARM_DESC(radio_nr, "Radio device numbers"); 81 82/* 83 * Frequency calculation constants. Intermediate frequency 10.52 MHz (nominal 84 * value 10.7 MHz), reference divisor 6.39 kHz (nominal 6.25 kHz). 85 */ 86#define FSCALE 8 87#define IF_OFFSET ((unsigned int)(10.52 * 16000 * (1<<FSCALE))) 88#define REF_FREQ ((unsigned int)(6.39 * 16 * (1<<FSCALE))) 89 90#define GEMTEK_CK 0x01 /* Clock signal */ 91#define GEMTEK_DA 0x02 /* Serial data */ 92#define GEMTEK_CE 0x04 /* Chip enable */ 93#define GEMTEK_NS 0x08 /* No signal */ 94#define GEMTEK_MT 0x10 /* Line mute */ 95#define GEMTEK_STDF_3_125_KHZ 0x01 /* Standard frequency 3.125 kHz */ 96#define GEMTEK_PLL_OFF 0x07 /* PLL off */ 97 98#define BU2614_BUS_SIZE 32 /* BU2614 / BU2614FS bus size */ 99 100#define SHORT_DELAY 5 /* usec */ 101#define LONG_DELAY 75 /* usec */ 102 103struct gemtek { 104 struct radio_isa_card isa; 105 bool muted; 106 u32 bu2614data; 107}; 108 109#define BU2614_FREQ_BITS 16 /* D0..D15, Frequency data */ 110#define BU2614_PORT_BITS 3 /* P0..P2, Output port control data */ 111#define BU2614_VOID_BITS 4 /* unused */ 112#define BU2614_FMES_BITS 1 /* CT, Frequency measurement beginning data */ 113#define BU2614_STDF_BITS 3 /* R0..R2, Standard frequency data */ 114#define BU2614_SWIN_BITS 1 /* S, Switch between FMIN / AMIN */ 115#define BU2614_SWAL_BITS 1 /* PS, Swallow counter division (AMIN only)*/ 116#define BU2614_VOID2_BITS 1 /* unused */ 117#define BU2614_FMUN_BITS 1 /* GT, Frequency measurement time & unlock */ 118#define BU2614_TEST_BITS 1 /* TS, Test data is input */ 119 120#define BU2614_FREQ_SHIFT 0 121#define BU2614_PORT_SHIFT (BU2614_FREQ_BITS + BU2614_FREQ_SHIFT) 122#define BU2614_VOID_SHIFT (BU2614_PORT_BITS + BU2614_PORT_SHIFT) 123#define BU2614_FMES_SHIFT (BU2614_VOID_BITS + BU2614_VOID_SHIFT) 124#define BU2614_STDF_SHIFT (BU2614_FMES_BITS + BU2614_FMES_SHIFT) 125#define BU2614_SWIN_SHIFT (BU2614_STDF_BITS + BU2614_STDF_SHIFT) 126#define BU2614_SWAL_SHIFT (BU2614_SWIN_BITS + BU2614_SWIN_SHIFT) 127#define BU2614_VOID2_SHIFT (BU2614_SWAL_BITS + BU2614_SWAL_SHIFT) 128#define BU2614_FMUN_SHIFT (BU2614_VOID2_BITS + BU2614_VOID2_SHIFT) 129#define BU2614_TEST_SHIFT (BU2614_FMUN_BITS + BU2614_FMUN_SHIFT) 130 131#define MKMASK(field) (((1<<BU2614_##field##_BITS) - 1) << \ 132 BU2614_##field##_SHIFT) 133#define BU2614_PORT_MASK MKMASK(PORT) 134#define BU2614_FREQ_MASK MKMASK(FREQ) 135#define BU2614_VOID_MASK MKMASK(VOID) 136#define BU2614_FMES_MASK MKMASK(FMES) 137#define BU2614_STDF_MASK MKMASK(STDF) 138#define BU2614_SWIN_MASK MKMASK(SWIN) 139#define BU2614_SWAL_MASK MKMASK(SWAL) 140#define BU2614_VOID2_MASK MKMASK(VOID2) 141#define BU2614_FMUN_MASK MKMASK(FMUN) 142#define BU2614_TEST_MASK MKMASK(TEST) 143 144/* 145 * Set data which will be sent to BU2614FS. 146 */ 147#define gemtek_bu2614_set(dev, field, data) ((dev)->bu2614data = \ 148 ((dev)->bu2614data & ~field##_MASK) | ((data) << field##_SHIFT)) 149 150/* 151 * Transmit settings to BU2614FS over GemTek IC. 152 */ 153static void gemtek_bu2614_transmit(struct gemtek *gt) 154{ 155 struct radio_isa_card *isa = >->isa; 156 int i, bit, q, mute; 157 158 mute = gt->muted ? GEMTEK_MT : 0x00; 159 160 outb_p(mute | GEMTEK_CE | GEMTEK_DA | GEMTEK_CK, isa->io); 161 udelay(LONG_DELAY); 162 163 for (i = 0, q = gt->bu2614data; i < 32; i++, q >>= 1) { 164 bit = (q & 1) ? GEMTEK_DA : 0; 165 outb_p(mute | GEMTEK_CE | bit, isa->io); 166 udelay(SHORT_DELAY); 167 outb_p(mute | GEMTEK_CE | bit | GEMTEK_CK, isa->io); 168 udelay(SHORT_DELAY); 169 } 170 171 outb_p(mute | GEMTEK_DA | GEMTEK_CK, isa->io); 172 udelay(SHORT_DELAY); 173} 174 175/* 176 * Calculate divisor from FM-frequency for BU2614FS (3.125 KHz STDF expected). 177 */ 178static unsigned long gemtek_convfreq(unsigned long freq) 179{ 180 return ((freq << FSCALE) + IF_OFFSET + REF_FREQ / 2) / REF_FREQ; 181} 182 183static struct radio_isa_card *gemtek_alloc(void) 184{ 185 struct gemtek *gt = kzalloc(sizeof(*gt), GFP_KERNEL); 186 187 if (gt) 188 gt->muted = true; 189 return gt ? >->isa : NULL; 190} 191 192/* 193 * Set FM-frequency. 194 */ 195static int gemtek_s_frequency(struct radio_isa_card *isa, u32 freq) 196{ 197 struct gemtek *gt = container_of(isa, struct gemtek, isa); 198 199 if (hardmute && gt->muted) 200 return 0; 201 202 gemtek_bu2614_set(gt, BU2614_PORT, 0); 203 gemtek_bu2614_set(gt, BU2614_FMES, 0); 204 gemtek_bu2614_set(gt, BU2614_SWIN, 0); /* FM-mode */ 205 gemtek_bu2614_set(gt, BU2614_SWAL, 0); 206 gemtek_bu2614_set(gt, BU2614_FMUN, 1); /* GT bit set */ 207 gemtek_bu2614_set(gt, BU2614_TEST, 0); 208 gemtek_bu2614_set(gt, BU2614_STDF, GEMTEK_STDF_3_125_KHZ); 209 gemtek_bu2614_set(gt, BU2614_FREQ, gemtek_convfreq(freq)); 210 gemtek_bu2614_transmit(gt); 211 return 0; 212} 213 214/* 215 * Set mute flag. 216 */ 217static int gemtek_s_mute_volume(struct radio_isa_card *isa, bool mute, int vol) 218{ 219 struct gemtek *gt = container_of(isa, struct gemtek, isa); 220 int i; 221 222 gt->muted = mute; 223 if (hardmute) { 224 if (!mute) 225 return gemtek_s_frequency(isa, isa->freq); 226 227 /* Turn off PLL, disable data output */ 228 gemtek_bu2614_set(gt, BU2614_PORT, 0); 229 gemtek_bu2614_set(gt, BU2614_FMES, 0); /* CT bit off */ 230 gemtek_bu2614_set(gt, BU2614_SWIN, 0); /* FM-mode */ 231 gemtek_bu2614_set(gt, BU2614_SWAL, 0); 232 gemtek_bu2614_set(gt, BU2614_FMUN, 0); /* GT bit off */ 233 gemtek_bu2614_set(gt, BU2614_TEST, 0); 234 gemtek_bu2614_set(gt, BU2614_STDF, GEMTEK_PLL_OFF); 235 gemtek_bu2614_set(gt, BU2614_FREQ, 0); 236 gemtek_bu2614_transmit(gt); 237 return 0; 238 } 239 240 /* Read bus contents (CE, CK and DA). */ 241 i = inb_p(isa->io); 242 /* Write it back with mute flag set. */ 243 outb_p((i >> 5) | (mute ? GEMTEK_MT : 0), isa->io); 244 udelay(SHORT_DELAY); 245 return 0; 246} 247 248static u32 gemtek_g_rxsubchans(struct radio_isa_card *isa) 249{ 250 if (inb_p(isa->io) & GEMTEK_NS) 251 return V4L2_TUNER_SUB_MONO; 252 return V4L2_TUNER_SUB_STEREO; 253} 254 255/* 256 * Check if requested card acts like GemTek Radio card. 257 */ 258static bool gemtek_probe(struct radio_isa_card *isa, int io) 259{ 260 int i, q; 261 262 q = inb_p(io); /* Read bus contents before probing. */ 263 /* Try to turn on CE, CK and DA respectively and check if card responds 264 properly. */ 265 for (i = 0; i < 3; ++i) { 266 outb_p(1 << i, io); 267 udelay(SHORT_DELAY); 268 269 if ((inb_p(io) & ~GEMTEK_NS) != (0x17 | (1 << (i + 5)))) 270 return false; 271 } 272 outb_p(q >> 5, io); /* Write bus contents back. */ 273 udelay(SHORT_DELAY); 274 return true; 275} 276 277static const struct radio_isa_ops gemtek_ops = { 278 .alloc = gemtek_alloc, 279 .probe = gemtek_probe, 280 .s_mute_volume = gemtek_s_mute_volume, 281 .s_frequency = gemtek_s_frequency, 282 .g_rxsubchans = gemtek_g_rxsubchans, 283}; 284 285static const int gemtek_ioports[] = { 0x20c, 0x30c, 0x24c, 0x34c, 0x248, 0x28c }; 286 287#ifdef CONFIG_PNP 288static struct pnp_device_id gemtek_pnp_devices[] = { 289 /* AOpen FX-3D/Pro Radio */ 290 {.id = "ADS7183", .driver_data = 0}, 291 {.id = ""} 292}; 293 294MODULE_DEVICE_TABLE(pnp, gemtek_pnp_devices); 295#endif 296 297static struct radio_isa_driver gemtek_driver = { 298 .driver = { 299 .match = radio_isa_match, 300 .probe = radio_isa_probe, 301 .remove = radio_isa_remove, 302 .driver = { 303 .name = "radio-gemtek", 304 }, 305 }, 306#ifdef CONFIG_PNP 307 .pnp_driver = { 308 .name = "radio-gemtek", 309 .id_table = gemtek_pnp_devices, 310 .probe = radio_isa_pnp_probe, 311 .remove = radio_isa_pnp_remove, 312 }, 313#endif 314 .io_params = io, 315 .radio_nr_params = radio_nr, 316 .io_ports = gemtek_ioports, 317 .num_of_io_ports = ARRAY_SIZE(gemtek_ioports), 318 .region_size = 1, 319 .card = "GemTek Radio", 320 .ops = &gemtek_ops, 321 .has_stereo = true, 322}; 323 324static int __init gemtek_init(void) 325{ 326 gemtek_driver.probe = probe; 327#ifdef CONFIG_PNP 328 pnp_register_driver(&gemtek_driver.pnp_driver); 329#endif 330 return isa_register_driver(&gemtek_driver.driver, GEMTEK_MAX); 331} 332 333static void __exit gemtek_exit(void) 334{ 335 hardmute = true; /* Turn off PLL */ 336#ifdef CONFIG_PNP 337 pnp_unregister_driver(&gemtek_driver.pnp_driver); 338#endif 339 isa_unregister_driver(&gemtek_driver.driver); 340} 341 342module_init(gemtek_init); 343module_exit(gemtek_exit); 344