1/*
2 *
3 * device driver for philips saa7134 based TV cards
4 * driver core
5 *
6 * (c) 2001-03 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
7 *
8 *  This program is free software; you can redistribute it and/or modify
9 *  it under the terms of the GNU General Public License as published by
10 *  the Free Software Foundation; either version 2 of the License, or
11 *  (at your option) any later version.
12 *
13 *  This program is distributed in the hope that it will be useful,
14 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
15 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16 *  GNU General Public License for more details.
17 *
18 *  You should have received a copy of the GNU General Public License
19 *  along with this program; if not, write to the Free Software
20 *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
21 */
22
23#include <linux/init.h>
24#include <linux/list.h>
25#include <linux/module.h>
26#include <linux/kernel.h>
27#include <linux/slab.h>
28#include <linux/kmod.h>
29#include <linux/sound.h>
30#include <linux/interrupt.h>
31#include <linux/delay.h>
32#include <linux/mutex.h>
33#include <linux/dma-mapping.h>
34#include <linux/pm.h>
35
36#include "saa7134-reg.h"
37#include "saa7134.h"
38
39MODULE_DESCRIPTION("v4l2 driver module for saa7130/34 based TV cards");
40MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
41MODULE_LICENSE("GPL");
42MODULE_VERSION(SAA7134_VERSION);
43
44
45/* ------------------------------------------------------------------ */
46
47static unsigned int irq_debug;
48module_param(irq_debug, int, 0644);
49MODULE_PARM_DESC(irq_debug,"enable debug messages [IRQ handler]");
50
51static unsigned int core_debug;
52module_param(core_debug, int, 0644);
53MODULE_PARM_DESC(core_debug,"enable debug messages [core]");
54
55static unsigned int gpio_tracking;
56module_param(gpio_tracking, int, 0644);
57MODULE_PARM_DESC(gpio_tracking,"enable debug messages [gpio]");
58
59static unsigned int alsa = 1;
60module_param(alsa, int, 0644);
61MODULE_PARM_DESC(alsa,"enable/disable ALSA DMA sound [dmasound]");
62
63static unsigned int latency = UNSET;
64module_param(latency, int, 0444);
65MODULE_PARM_DESC(latency,"pci latency timer");
66
67int saa7134_no_overlay=-1;
68module_param_named(no_overlay, saa7134_no_overlay, int, 0444);
69MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)"
70		" [some VIA/SIS chipsets are known to have problem with overlay]");
71
72bool saa7134_userptr;
73module_param(saa7134_userptr, bool, 0644);
74MODULE_PARM_DESC(saa7134_userptr, "enable page-aligned userptr support");
75
76static unsigned int video_nr[] = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET };
77static unsigned int vbi_nr[]   = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET };
78static unsigned int radio_nr[] = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET };
79static unsigned int tuner[]    = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET };
80static unsigned int card[]     = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET };
81
82
83module_param_array(video_nr, int, NULL, 0444);
84module_param_array(vbi_nr,   int, NULL, 0444);
85module_param_array(radio_nr, int, NULL, 0444);
86module_param_array(tuner,    int, NULL, 0444);
87module_param_array(card,     int, NULL, 0444);
88
89MODULE_PARM_DESC(video_nr, "video device number");
90MODULE_PARM_DESC(vbi_nr,   "vbi device number");
91MODULE_PARM_DESC(radio_nr, "radio device number");
92MODULE_PARM_DESC(tuner,    "tuner type");
93MODULE_PARM_DESC(card,     "card type");
94
95DEFINE_MUTEX(saa7134_devlist_lock);
96EXPORT_SYMBOL(saa7134_devlist_lock);
97LIST_HEAD(saa7134_devlist);
98EXPORT_SYMBOL(saa7134_devlist);
99static LIST_HEAD(mops_list);
100static unsigned int saa7134_devcount;
101
102int (*saa7134_dmasound_init)(struct saa7134_dev *dev);
103int (*saa7134_dmasound_exit)(struct saa7134_dev *dev);
104
105#define dprintk(fmt, arg...)	if (core_debug) \
106	printk(KERN_DEBUG "%s/core: " fmt, dev->name , ## arg)
107
108void saa7134_track_gpio(struct saa7134_dev *dev, char *msg)
109{
110	unsigned long mode,status;
111
112	if (!gpio_tracking)
113		return;
114	/* rising SAA7134_GPIO_GPRESCAN reads the status */
115	saa_andorb(SAA7134_GPIO_GPMODE3,SAA7134_GPIO_GPRESCAN,0);
116	saa_andorb(SAA7134_GPIO_GPMODE3,SAA7134_GPIO_GPRESCAN,SAA7134_GPIO_GPRESCAN);
117	mode   = saa_readl(SAA7134_GPIO_GPMODE0   >> 2) & 0xfffffff;
118	status = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2) & 0xfffffff;
119	printk(KERN_DEBUG
120	       "%s: gpio: mode=0x%07lx in=0x%07lx out=0x%07lx [%s]\n",
121	       dev->name, mode, (~mode) & status, mode & status, msg);
122}
123
124void saa7134_set_gpio(struct saa7134_dev *dev, int bit_no, int value)
125{
126	u32 index, bitval;
127
128	index = 1 << bit_no;
129	switch (value) {
130	case 0: /* static value */
131	case 1:	dprintk("setting GPIO%d to static %d\n", bit_no, value);
132		/* turn sync mode off if necessary */
133		if (index & 0x00c00000)
134			saa_andorb(SAA7134_VIDEO_PORT_CTRL6, 0x0f, 0x00);
135		if (value)
136			bitval = index;
137		else
138			bitval = 0;
139		saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, index, index);
140		saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, index, bitval);
141		break;
142	case 3:	/* tristate */
143		dprintk("setting GPIO%d to tristate\n", bit_no);
144		saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, index, 0);
145		break;
146	}
147}
148
149/* ------------------------------------------------------------------ */
150
151
152/* ----------------------------------------------------------- */
153/* delayed request_module                                      */
154
155#if defined(CONFIG_MODULES) && defined(MODULE)
156
157static void request_module_async(struct work_struct *work){
158	struct saa7134_dev* dev = container_of(work, struct saa7134_dev, request_module_wk);
159	if (card_is_empress(dev))
160		request_module("saa7134-empress");
161	if (card_is_dvb(dev))
162		request_module("saa7134-dvb");
163	if (card_is_go7007(dev))
164		request_module("saa7134-go7007");
165	if (alsa) {
166		if (dev->pci->device != PCI_DEVICE_ID_PHILIPS_SAA7130)
167			request_module("saa7134-alsa");
168	}
169}
170
171static void request_submodules(struct saa7134_dev *dev)
172{
173	INIT_WORK(&dev->request_module_wk, request_module_async);
174	schedule_work(&dev->request_module_wk);
175}
176
177static void flush_request_submodules(struct saa7134_dev *dev)
178{
179	flush_work(&dev->request_module_wk);
180}
181
182#else
183#define request_submodules(dev)
184#define flush_request_submodules(dev)
185#endif /* CONFIG_MODULES */
186
187/* ------------------------------------------------------------------ */
188
189/* nr of (saa7134-)pages for the given buffer size */
190static int saa7134_buffer_pages(int size)
191{
192	size  = PAGE_ALIGN(size);
193	size += PAGE_SIZE; /* for non-page-aligned buffers */
194	size /= 4096;
195	return size;
196}
197
198/* calc max # of buffers from size (must not exceed the 4MB virtual
199 * address space per DMA channel) */
200int saa7134_buffer_count(unsigned int size, unsigned int count)
201{
202	unsigned int maxcount;
203
204	maxcount = 1024 / saa7134_buffer_pages(size);
205	if (count > maxcount)
206		count = maxcount;
207	return count;
208}
209
210int saa7134_buffer_startpage(struct saa7134_buf *buf)
211{
212	return saa7134_buffer_pages(vb2_plane_size(&buf->vb2, 0)) * buf->vb2.v4l2_buf.index;
213}
214
215unsigned long saa7134_buffer_base(struct saa7134_buf *buf)
216{
217	unsigned long base;
218	struct sg_table *dma = vb2_dma_sg_plane_desc(&buf->vb2, 0);
219
220	base  = saa7134_buffer_startpage(buf) * 4096;
221	base += dma->sgl[0].offset;
222	return base;
223}
224
225/* ------------------------------------------------------------------ */
226
227int saa7134_pgtable_alloc(struct pci_dev *pci, struct saa7134_pgtable *pt)
228{
229	__le32       *cpu;
230	dma_addr_t   dma_addr = 0;
231
232	cpu = pci_alloc_consistent(pci, SAA7134_PGTABLE_SIZE, &dma_addr);
233	if (NULL == cpu)
234		return -ENOMEM;
235	pt->size = SAA7134_PGTABLE_SIZE;
236	pt->cpu  = cpu;
237	pt->dma  = dma_addr;
238	return 0;
239}
240
241int saa7134_pgtable_build(struct pci_dev *pci, struct saa7134_pgtable *pt,
242			  struct scatterlist *list, unsigned int length,
243			  unsigned int startpage)
244{
245	__le32        *ptr;
246	unsigned int  i, p;
247
248	BUG_ON(NULL == pt || NULL == pt->cpu);
249
250	ptr = pt->cpu + startpage;
251	for (i = 0; i < length; i++, list = sg_next(list)) {
252		for (p = 0; p * 4096 < list->length; p++, ptr++)
253			*ptr = cpu_to_le32(sg_dma_address(list) +
254						list->offset + p * 4096);
255	}
256	return 0;
257}
258
259void saa7134_pgtable_free(struct pci_dev *pci, struct saa7134_pgtable *pt)
260{
261	if (NULL == pt->cpu)
262		return;
263	pci_free_consistent(pci, pt->size, pt->cpu, pt->dma);
264	pt->cpu = NULL;
265}
266
267/* ------------------------------------------------------------------ */
268
269int saa7134_buffer_queue(struct saa7134_dev *dev,
270			 struct saa7134_dmaqueue *q,
271			 struct saa7134_buf *buf)
272{
273	struct saa7134_buf *next = NULL;
274	unsigned long flags;
275
276	spin_lock_irqsave(&dev->slock, flags);
277	dprintk("buffer_queue %p\n", buf);
278	if (NULL == q->curr) {
279		if (!q->need_two) {
280			q->curr = buf;
281			buf->activate(dev, buf, NULL);
282		} else if (list_empty(&q->queue)) {
283			list_add_tail(&buf->entry, &q->queue);
284		} else {
285			next = list_entry(q->queue.next, struct saa7134_buf,
286					  entry);
287			q->curr = buf;
288			buf->activate(dev, buf, next);
289		}
290	} else {
291		list_add_tail(&buf->entry, &q->queue);
292	}
293	spin_unlock_irqrestore(&dev->slock, flags);
294	return 0;
295}
296
297void saa7134_buffer_finish(struct saa7134_dev *dev,
298			   struct saa7134_dmaqueue *q,
299			   unsigned int state)
300{
301	dprintk("buffer_finish %p\n", q->curr);
302
303	/* finish current buffer */
304	v4l2_get_timestamp(&q->curr->vb2.v4l2_buf.timestamp);
305	q->curr->vb2.v4l2_buf.sequence = q->seq_nr++;
306	vb2_buffer_done(&q->curr->vb2, state);
307	q->curr = NULL;
308}
309
310void saa7134_buffer_next(struct saa7134_dev *dev,
311			 struct saa7134_dmaqueue *q)
312{
313	struct saa7134_buf *buf,*next = NULL;
314
315	assert_spin_locked(&dev->slock);
316	BUG_ON(NULL != q->curr);
317
318	if (!list_empty(&q->queue)) {
319		/* activate next one from queue */
320		buf = list_entry(q->queue.next, struct saa7134_buf, entry);
321		dprintk("buffer_next %p [prev=%p/next=%p]\n",
322			buf, q->queue.prev, q->queue.next);
323		list_del(&buf->entry);
324		if (!list_empty(&q->queue))
325			next = list_entry(q->queue.next, struct saa7134_buf, entry);
326		q->curr = buf;
327		buf->activate(dev, buf, next);
328		dprintk("buffer_next #2 prev=%p/next=%p\n",
329			q->queue.prev, q->queue.next);
330	} else {
331		/* nothing to do -- just stop DMA */
332		dprintk("buffer_next %p\n", NULL);
333		saa7134_set_dmabits(dev);
334		del_timer(&q->timeout);
335	}
336}
337
338void saa7134_buffer_timeout(unsigned long data)
339{
340	struct saa7134_dmaqueue *q = (struct saa7134_dmaqueue *)data;
341	struct saa7134_dev *dev = q->dev;
342	unsigned long flags;
343
344	spin_lock_irqsave(&dev->slock, flags);
345
346	/* try to reset the hardware (SWRST) */
347	saa_writeb(SAA7134_REGION_ENABLE, 0x00);
348	saa_writeb(SAA7134_REGION_ENABLE, 0x80);
349	saa_writeb(SAA7134_REGION_ENABLE, 0x00);
350
351	/* flag current buffer as failed,
352	   try to start over with the next one. */
353	if (q->curr) {
354		dprintk("timeout on %p\n", q->curr);
355		saa7134_buffer_finish(dev, q, VB2_BUF_STATE_ERROR);
356	}
357	saa7134_buffer_next(dev, q);
358	spin_unlock_irqrestore(&dev->slock, flags);
359}
360
361void saa7134_stop_streaming(struct saa7134_dev *dev, struct saa7134_dmaqueue *q)
362{
363	unsigned long flags;
364	struct list_head *pos, *n;
365	struct saa7134_buf *tmp;
366
367	spin_lock_irqsave(&dev->slock, flags);
368	if (!list_empty(&q->queue)) {
369		list_for_each_safe(pos, n, &q->queue) {
370			 tmp = list_entry(pos, struct saa7134_buf, entry);
371			 vb2_buffer_done(&tmp->vb2, VB2_BUF_STATE_ERROR);
372			 list_del(pos);
373			 tmp = NULL;
374		}
375	}
376	spin_unlock_irqrestore(&dev->slock, flags);
377	saa7134_buffer_timeout((unsigned long)q); /* also calls del_timer(&q->timeout) */
378}
379EXPORT_SYMBOL_GPL(saa7134_stop_streaming);
380
381/* ------------------------------------------------------------------ */
382
383int saa7134_set_dmabits(struct saa7134_dev *dev)
384{
385	u32 split, task=0, ctrl=0, irq=0;
386	enum v4l2_field cap = V4L2_FIELD_ANY;
387	enum v4l2_field ov  = V4L2_FIELD_ANY;
388
389	assert_spin_locked(&dev->slock);
390
391	if (dev->insuspend)
392		return 0;
393
394	/* video capture -- dma 0 + video task A */
395	if (dev->video_q.curr) {
396		task |= 0x01;
397		ctrl |= SAA7134_MAIN_CTRL_TE0;
398		irq  |= SAA7134_IRQ1_INTE_RA0_1 |
399			SAA7134_IRQ1_INTE_RA0_0;
400		cap = dev->field;
401	}
402
403	/* video capture -- dma 1+2 (planar modes) */
404	if (dev->video_q.curr && dev->fmt->planar) {
405		ctrl |= SAA7134_MAIN_CTRL_TE4 |
406			SAA7134_MAIN_CTRL_TE5;
407	}
408
409	/* screen overlay -- dma 0 + video task B */
410	if (dev->ovenable) {
411		task |= 0x10;
412		ctrl |= SAA7134_MAIN_CTRL_TE1;
413		ov = dev->ovfield;
414	}
415
416	/* vbi capture -- dma 0 + vbi task A+B */
417	if (dev->vbi_q.curr) {
418		task |= 0x22;
419		ctrl |= SAA7134_MAIN_CTRL_TE2 |
420			SAA7134_MAIN_CTRL_TE3;
421		irq  |= SAA7134_IRQ1_INTE_RA0_7 |
422			SAA7134_IRQ1_INTE_RA0_6 |
423			SAA7134_IRQ1_INTE_RA0_5 |
424			SAA7134_IRQ1_INTE_RA0_4;
425	}
426
427	/* audio capture -- dma 3 */
428	if (dev->dmasound.dma_running) {
429		ctrl |= SAA7134_MAIN_CTRL_TE6;
430		irq  |= SAA7134_IRQ1_INTE_RA3_1 |
431			SAA7134_IRQ1_INTE_RA3_0;
432	}
433
434	/* TS capture -- dma 5 */
435	if (dev->ts_q.curr) {
436		ctrl |= SAA7134_MAIN_CTRL_TE5;
437		irq  |= SAA7134_IRQ1_INTE_RA2_1 |
438			SAA7134_IRQ1_INTE_RA2_0;
439	}
440
441	/* set task conditions + field handling */
442	if (V4L2_FIELD_HAS_BOTH(cap) || V4L2_FIELD_HAS_BOTH(ov) || cap == ov) {
443		/* default config -- use full frames */
444		saa_writeb(SAA7134_TASK_CONDITIONS(TASK_A), 0x0d);
445		saa_writeb(SAA7134_TASK_CONDITIONS(TASK_B), 0x0d);
446		saa_writeb(SAA7134_FIELD_HANDLING(TASK_A),  0x02);
447		saa_writeb(SAA7134_FIELD_HANDLING(TASK_B),  0x02);
448		split = 0;
449	} else {
450		/* split fields between tasks */
451		if (V4L2_FIELD_TOP == cap) {
452			/* odd A, even B, repeat */
453			saa_writeb(SAA7134_TASK_CONDITIONS(TASK_A), 0x0d);
454			saa_writeb(SAA7134_TASK_CONDITIONS(TASK_B), 0x0e);
455		} else {
456			/* odd B, even A, repeat */
457			saa_writeb(SAA7134_TASK_CONDITIONS(TASK_A), 0x0e);
458			saa_writeb(SAA7134_TASK_CONDITIONS(TASK_B), 0x0d);
459		}
460		saa_writeb(SAA7134_FIELD_HANDLING(TASK_A),  0x01);
461		saa_writeb(SAA7134_FIELD_HANDLING(TASK_B),  0x01);
462		split = 1;
463	}
464
465	/* irqs */
466	saa_writeb(SAA7134_REGION_ENABLE, task);
467	saa_writel(SAA7134_IRQ1,          irq);
468	saa_andorl(SAA7134_MAIN_CTRL,
469		   SAA7134_MAIN_CTRL_TE0 |
470		   SAA7134_MAIN_CTRL_TE1 |
471		   SAA7134_MAIN_CTRL_TE2 |
472		   SAA7134_MAIN_CTRL_TE3 |
473		   SAA7134_MAIN_CTRL_TE4 |
474		   SAA7134_MAIN_CTRL_TE5 |
475		   SAA7134_MAIN_CTRL_TE6,
476		   ctrl);
477	dprintk("dmabits: task=0x%02x ctrl=0x%02x irq=0x%x split=%s\n",
478		task, ctrl, irq, split ? "no" : "yes");
479
480	return 0;
481}
482
483/* ------------------------------------------------------------------ */
484/* IRQ handler + helpers                                              */
485
486static char *irqbits[] = {
487	"DONE_RA0", "DONE_RA1", "DONE_RA2", "DONE_RA3",
488	"AR", "PE", "PWR_ON", "RDCAP", "INTL", "FIDT", "MMC",
489	"TRIG_ERR", "CONF_ERR", "LOAD_ERR",
490	"GPIO16", "GPIO18", "GPIO22", "GPIO23"
491};
492#define IRQBITS ARRAY_SIZE(irqbits)
493
494static void print_irqstatus(struct saa7134_dev *dev, int loop,
495			    unsigned long report, unsigned long status)
496{
497	unsigned int i;
498
499	printk(KERN_DEBUG "%s/irq[%d,%ld]: r=0x%lx s=0x%02lx",
500	       dev->name,loop,jiffies,report,status);
501	for (i = 0; i < IRQBITS; i++) {
502		if (!(report & (1 << i)))
503			continue;
504		printk(" %s",irqbits[i]);
505	}
506	if (report & SAA7134_IRQ_REPORT_DONE_RA0) {
507		printk(" | RA0=%s,%s,%s,%ld",
508		       (status & 0x40) ? "vbi"  : "video",
509		       (status & 0x20) ? "b"    : "a",
510		       (status & 0x10) ? "odd"  : "even",
511		       (status & 0x0f));
512	}
513	printk("\n");
514}
515
516static irqreturn_t saa7134_irq(int irq, void *dev_id)
517{
518	struct saa7134_dev *dev = (struct saa7134_dev*) dev_id;
519	unsigned long report,status;
520	int loop, handled = 0;
521
522	if (dev->insuspend)
523		goto out;
524
525	for (loop = 0; loop < 10; loop++) {
526		report = saa_readl(SAA7134_IRQ_REPORT);
527		status = saa_readl(SAA7134_IRQ_STATUS);
528
529		/* If dmasound support is active and we get a sound report,
530		 * mask out the report and let the saa7134-alsa module deal
531		 * with it */
532		if ((report & SAA7134_IRQ_REPORT_DONE_RA3) &&
533			(dev->dmasound.priv_data != NULL) )
534		{
535			if (irq_debug > 1)
536				printk(KERN_DEBUG "%s/irq: preserving DMA sound interrupt\n",
537				       dev->name);
538			report &= ~SAA7134_IRQ_REPORT_DONE_RA3;
539		}
540
541		if (0 == report) {
542			if (irq_debug > 1)
543				printk(KERN_DEBUG "%s/irq: no (more) work\n",
544				       dev->name);
545			goto out;
546		}
547
548		handled = 1;
549		saa_writel(SAA7134_IRQ_REPORT,report);
550		if (irq_debug)
551			print_irqstatus(dev,loop,report,status);
552
553
554		if ((report & SAA7134_IRQ_REPORT_RDCAP) ||
555			(report & SAA7134_IRQ_REPORT_INTL))
556				saa7134_irq_video_signalchange(dev);
557
558
559		if ((report & SAA7134_IRQ_REPORT_DONE_RA0) &&
560		    (status & 0x60) == 0)
561			saa7134_irq_video_done(dev,status);
562
563		if ((report & SAA7134_IRQ_REPORT_DONE_RA0) &&
564		    (status & 0x40) == 0x40)
565			saa7134_irq_vbi_done(dev,status);
566
567		if ((report & SAA7134_IRQ_REPORT_DONE_RA2) &&
568		    card_has_mpeg(dev)) {
569			if (dev->mops->irq_ts_done != NULL)
570				dev->mops->irq_ts_done(dev, status);
571			else
572				saa7134_irq_ts_done(dev, status);
573		}
574
575		if (report & SAA7134_IRQ_REPORT_GPIO16) {
576			switch (dev->has_remote) {
577				case SAA7134_REMOTE_GPIO:
578					if (!dev->remote)
579						break;
580					if  (dev->remote->mask_keydown & 0x10000) {
581						saa7134_input_irq(dev);
582					}
583					break;
584
585				case SAA7134_REMOTE_I2C:
586					break;			/* FIXME: invoke I2C get_key() */
587
588				default:			/* GPIO16 not used by IR remote */
589					break;
590			}
591		}
592
593		if (report & SAA7134_IRQ_REPORT_GPIO18) {
594			switch (dev->has_remote) {
595				case SAA7134_REMOTE_GPIO:
596					if (!dev->remote)
597						break;
598					if ((dev->remote->mask_keydown & 0x40000) ||
599					    (dev->remote->mask_keyup & 0x40000)) {
600						saa7134_input_irq(dev);
601					}
602					break;
603
604				case SAA7134_REMOTE_I2C:
605					break;			/* FIXME: invoke I2C get_key() */
606
607				default:			/* GPIO18 not used by IR remote */
608					break;
609			}
610		}
611	}
612
613	if (10 == loop) {
614		print_irqstatus(dev,loop,report,status);
615		if (report & SAA7134_IRQ_REPORT_PE) {
616			/* disable all parity error */
617			printk(KERN_WARNING "%s/irq: looping -- "
618			       "clearing PE (parity error!) enable bit\n",dev->name);
619			saa_clearl(SAA7134_IRQ2,SAA7134_IRQ2_INTE_PE);
620		} else if (report & SAA7134_IRQ_REPORT_GPIO16) {
621			/* disable gpio16 IRQ */
622			printk(KERN_WARNING "%s/irq: looping -- "
623			       "clearing GPIO16 enable bit\n",dev->name);
624			saa_clearl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO16_P);
625			saa_clearl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO16_N);
626		} else if (report & SAA7134_IRQ_REPORT_GPIO18) {
627			/* disable gpio18 IRQs */
628			printk(KERN_WARNING "%s/irq: looping -- "
629			       "clearing GPIO18 enable bit\n",dev->name);
630			saa_clearl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO18_P);
631			saa_clearl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO18_N);
632		} else {
633			/* disable all irqs */
634			printk(KERN_WARNING "%s/irq: looping -- "
635			       "clearing all enable bits\n",dev->name);
636			saa_writel(SAA7134_IRQ1,0);
637			saa_writel(SAA7134_IRQ2,0);
638		}
639	}
640
641 out:
642	return IRQ_RETVAL(handled);
643}
644
645/* ------------------------------------------------------------------ */
646
647/* early init (no i2c, no irq) */
648
649static int saa7134_hw_enable1(struct saa7134_dev *dev)
650{
651	/* RAM FIFO config */
652	saa_writel(SAA7134_FIFO_SIZE, 0x08070503);
653	saa_writel(SAA7134_THRESHOULD, 0x02020202);
654
655	/* enable audio + video processing */
656	saa_writel(SAA7134_MAIN_CTRL,
657			SAA7134_MAIN_CTRL_VPLLE |
658			SAA7134_MAIN_CTRL_APLLE |
659			SAA7134_MAIN_CTRL_EXOSC |
660			SAA7134_MAIN_CTRL_EVFE1 |
661			SAA7134_MAIN_CTRL_EVFE2 |
662			SAA7134_MAIN_CTRL_ESFE  |
663			SAA7134_MAIN_CTRL_EBDAC);
664
665	/*
666	* Initialize OSS _after_ enabling audio clock PLL and audio processing.
667	* OSS initialization writes to registers via the audio DSP; these
668	* writes will fail unless the audio clock has been started.  At worst,
669	* audio will not work.
670	*/
671
672	/* enable peripheral devices */
673	saa_writeb(SAA7134_SPECIAL_MODE, 0x01);
674
675	/* set vertical line numbering start (vbi needs this) */
676	saa_writeb(SAA7134_SOURCE_TIMING2, 0x20);
677
678	return 0;
679}
680
681static int saa7134_hwinit1(struct saa7134_dev *dev)
682{
683	dprintk("hwinit1\n");
684
685	saa_writel(SAA7134_IRQ1, 0);
686	saa_writel(SAA7134_IRQ2, 0);
687
688	/* Clear any stale IRQ reports */
689	saa_writel(SAA7134_IRQ_REPORT, saa_readl(SAA7134_IRQ_REPORT));
690
691	mutex_init(&dev->lock);
692	spin_lock_init(&dev->slock);
693
694	saa7134_track_gpio(dev,"pre-init");
695	saa7134_video_init1(dev);
696	saa7134_vbi_init1(dev);
697	if (card_has_mpeg(dev))
698		saa7134_ts_init1(dev);
699	saa7134_input_init1(dev);
700
701	saa7134_hw_enable1(dev);
702
703	return 0;
704}
705
706/* late init (with i2c + irq) */
707static int saa7134_hw_enable2(struct saa7134_dev *dev)
708{
709
710	unsigned int irq2_mask;
711
712	/* enable IRQ's */
713	irq2_mask =
714		SAA7134_IRQ2_INTE_DEC3    |
715		SAA7134_IRQ2_INTE_DEC2    |
716		SAA7134_IRQ2_INTE_DEC1    |
717		SAA7134_IRQ2_INTE_DEC0    |
718		SAA7134_IRQ2_INTE_PE      |
719		SAA7134_IRQ2_INTE_AR;
720
721	if (dev->has_remote == SAA7134_REMOTE_GPIO && dev->remote) {
722		if (dev->remote->mask_keydown & 0x10000)
723			irq2_mask |= SAA7134_IRQ2_INTE_GPIO16_N;
724		else {		/* Allow enabling both IRQ edge triggers */
725			if (dev->remote->mask_keydown & 0x40000)
726				irq2_mask |= SAA7134_IRQ2_INTE_GPIO18_P;
727			if (dev->remote->mask_keyup & 0x40000)
728				irq2_mask |= SAA7134_IRQ2_INTE_GPIO18_N;
729		}
730	}
731
732	if (dev->has_remote == SAA7134_REMOTE_I2C) {
733		request_module("ir-kbd-i2c");
734	}
735
736	saa_writel(SAA7134_IRQ1, 0);
737	saa_writel(SAA7134_IRQ2, irq2_mask);
738
739	return 0;
740}
741
742static int saa7134_hwinit2(struct saa7134_dev *dev)
743{
744
745	dprintk("hwinit2\n");
746
747	saa7134_video_init2(dev);
748	saa7134_tvaudio_init2(dev);
749
750	saa7134_hw_enable2(dev);
751
752	return 0;
753}
754
755
756/* shutdown */
757static int saa7134_hwfini(struct saa7134_dev *dev)
758{
759	dprintk("hwfini\n");
760
761	if (card_has_mpeg(dev))
762		saa7134_ts_fini(dev);
763	saa7134_input_fini(dev);
764	saa7134_vbi_fini(dev);
765	saa7134_tvaudio_fini(dev);
766	saa7134_video_fini(dev);
767	return 0;
768}
769
770static void must_configure_manually(int has_eeprom)
771{
772	unsigned int i,p;
773
774	if (!has_eeprom)
775		printk(KERN_WARNING
776		       "saa7134: <rant>\n"
777		       "saa7134:  Congratulations!  Your TV card vendor saved a few\n"
778		       "saa7134:  cents for a eeprom, thus your pci board has no\n"
779		       "saa7134:  subsystem ID and I can't identify it automatically\n"
780		       "saa7134: </rant>\n"
781		       "saa7134: I feel better now.  Ok, here are the good news:\n"
782		       "saa7134: You can use the card=<nr> insmod option to specify\n"
783		       "saa7134: which board do you have.  The list:\n");
784	else
785		printk(KERN_WARNING
786		       "saa7134: Board is currently unknown. You might try to use the card=<nr>\n"
787		       "saa7134: insmod option to specify which board do you have, but this is\n"
788		       "saa7134: somewhat risky, as might damage your card. It is better to ask\n"
789		       "saa7134: for support at linux-media@vger.kernel.org.\n"
790		       "saa7134: The supported cards are:\n");
791
792	for (i = 0; i < saa7134_bcount; i++) {
793		printk(KERN_WARNING "saa7134:   card=%d -> %-40.40s",
794		       i,saa7134_boards[i].name);
795		for (p = 0; saa7134_pci_tbl[p].driver_data; p++) {
796			if (saa7134_pci_tbl[p].driver_data != i)
797				continue;
798			printk(" %04x:%04x",
799			       saa7134_pci_tbl[p].subvendor,
800			       saa7134_pci_tbl[p].subdevice);
801		}
802		printk("\n");
803	}
804}
805
806static struct video_device *vdev_init(struct saa7134_dev *dev,
807				      struct video_device *template,
808				      char *type)
809{
810	struct video_device *vfd;
811
812	vfd = video_device_alloc();
813	if (NULL == vfd)
814		return NULL;
815	*vfd = *template;
816	vfd->v4l2_dev  = &dev->v4l2_dev;
817	vfd->release = video_device_release;
818	snprintf(vfd->name, sizeof(vfd->name), "%s %s (%s)",
819		 dev->name, type, saa7134_boards[dev->board].name);
820	video_set_drvdata(vfd, dev);
821	return vfd;
822}
823
824static void saa7134_unregister_video(struct saa7134_dev *dev)
825{
826	if (dev->video_dev) {
827		if (video_is_registered(dev->video_dev))
828			video_unregister_device(dev->video_dev);
829		else
830			video_device_release(dev->video_dev);
831		dev->video_dev = NULL;
832	}
833	if (dev->vbi_dev) {
834		if (video_is_registered(dev->vbi_dev))
835			video_unregister_device(dev->vbi_dev);
836		else
837			video_device_release(dev->vbi_dev);
838		dev->vbi_dev = NULL;
839	}
840	if (dev->radio_dev) {
841		if (video_is_registered(dev->radio_dev))
842			video_unregister_device(dev->radio_dev);
843		else
844			video_device_release(dev->radio_dev);
845		dev->radio_dev = NULL;
846	}
847}
848
849static void mpeg_ops_attach(struct saa7134_mpeg_ops *ops,
850			    struct saa7134_dev *dev)
851{
852	int err;
853
854	if (NULL != dev->mops)
855		return;
856	if (saa7134_boards[dev->board].mpeg != ops->type)
857		return;
858	err = ops->init(dev);
859	if (0 != err)
860		return;
861	dev->mops = ops;
862}
863
864static void mpeg_ops_detach(struct saa7134_mpeg_ops *ops,
865			    struct saa7134_dev *dev)
866{
867	if (NULL == dev->mops)
868		return;
869	if (dev->mops != ops)
870		return;
871	dev->mops->fini(dev);
872	dev->mops = NULL;
873}
874
875static int saa7134_initdev(struct pci_dev *pci_dev,
876			   const struct pci_device_id *pci_id)
877{
878	struct saa7134_dev *dev;
879	struct saa7134_mpeg_ops *mops;
880	int err;
881
882	if (saa7134_devcount == SAA7134_MAXBOARDS)
883		return -ENOMEM;
884
885	dev = kzalloc(sizeof(*dev),GFP_KERNEL);
886	if (NULL == dev)
887		return -ENOMEM;
888
889	err = v4l2_device_register(&pci_dev->dev, &dev->v4l2_dev);
890	if (err)
891		goto fail0;
892
893	/* pci init */
894	dev->pci = pci_dev;
895	if (pci_enable_device(pci_dev)) {
896		err = -EIO;
897		goto fail1;
898	}
899
900	dev->nr = saa7134_devcount;
901	sprintf(dev->name,"saa%x[%d]",pci_dev->device,dev->nr);
902
903	/* pci quirks */
904	if (pci_pci_problems) {
905		if (pci_pci_problems & PCIPCI_TRITON)
906			printk(KERN_INFO "%s: quirk: PCIPCI_TRITON\n", dev->name);
907		if (pci_pci_problems & PCIPCI_NATOMA)
908			printk(KERN_INFO "%s: quirk: PCIPCI_NATOMA\n", dev->name);
909		if (pci_pci_problems & PCIPCI_VIAETBF)
910			printk(KERN_INFO "%s: quirk: PCIPCI_VIAETBF\n", dev->name);
911		if (pci_pci_problems & PCIPCI_VSFX)
912			printk(KERN_INFO "%s: quirk: PCIPCI_VSFX\n",dev->name);
913#ifdef PCIPCI_ALIMAGIK
914		if (pci_pci_problems & PCIPCI_ALIMAGIK) {
915			printk(KERN_INFO "%s: quirk: PCIPCI_ALIMAGIK -- latency fixup\n",
916			       dev->name);
917			latency = 0x0A;
918		}
919#endif
920		if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL)) {
921			printk(KERN_INFO "%s: quirk: this driver and your "
922					"chipset may not work together"
923					" in overlay mode.\n",dev->name);
924			if (!saa7134_no_overlay) {
925				printk(KERN_INFO "%s: quirk: overlay "
926						"mode will be disabled.\n",
927						dev->name);
928				saa7134_no_overlay = 1;
929			} else {
930				printk(KERN_INFO "%s: quirk: overlay "
931						"mode will be forced. Use this"
932						" option at your own risk.\n",
933						dev->name);
934			}
935		}
936	}
937	if (UNSET != latency) {
938		printk(KERN_INFO "%s: setting pci latency timer to %d\n",
939		       dev->name,latency);
940		pci_write_config_byte(pci_dev, PCI_LATENCY_TIMER, latency);
941	}
942
943	/* print pci info */
944	dev->pci_rev = pci_dev->revision;
945	pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER,  &dev->pci_lat);
946	printk(KERN_INFO "%s: found at %s, rev: %d, irq: %d, "
947	       "latency: %d, mmio: 0x%llx\n", dev->name,
948	       pci_name(pci_dev), dev->pci_rev, pci_dev->irq,
949	       dev->pci_lat,(unsigned long long)pci_resource_start(pci_dev,0));
950	pci_set_master(pci_dev);
951	if (!pci_dma_supported(pci_dev, DMA_BIT_MASK(32))) {
952		printk("%s: Oops: no 32bit PCI DMA ???\n",dev->name);
953		err = -EIO;
954		goto fail1;
955	}
956
957	/* board config */
958	dev->board = pci_id->driver_data;
959	if ((unsigned)card[dev->nr] < saa7134_bcount)
960		dev->board = card[dev->nr];
961	if (SAA7134_BOARD_UNKNOWN == dev->board)
962		must_configure_manually(0);
963	else if (SAA7134_BOARD_NOAUTO == dev->board) {
964		must_configure_manually(1);
965		dev->board = SAA7134_BOARD_UNKNOWN;
966	}
967	dev->autodetected = card[dev->nr] != dev->board;
968	dev->tuner_type = saa7134_boards[dev->board].tuner_type;
969	dev->tuner_addr = saa7134_boards[dev->board].tuner_addr;
970	dev->radio_type = saa7134_boards[dev->board].radio_type;
971	dev->radio_addr = saa7134_boards[dev->board].radio_addr;
972	dev->tda9887_conf = saa7134_boards[dev->board].tda9887_conf;
973	if (UNSET != tuner[dev->nr])
974		dev->tuner_type = tuner[dev->nr];
975	printk(KERN_INFO "%s: subsystem: %04x:%04x, board: %s [card=%d,%s]\n",
976		dev->name,pci_dev->subsystem_vendor,
977		pci_dev->subsystem_device,saa7134_boards[dev->board].name,
978		dev->board, dev->autodetected ?
979		"autodetected" : "insmod option");
980
981	/* get mmio */
982	if (!request_mem_region(pci_resource_start(pci_dev,0),
983				pci_resource_len(pci_dev,0),
984				dev->name)) {
985		err = -EBUSY;
986		printk(KERN_ERR "%s: can't get MMIO memory @ 0x%llx\n",
987		       dev->name,(unsigned long long)pci_resource_start(pci_dev,0));
988		goto fail1;
989	}
990	dev->lmmio = ioremap(pci_resource_start(pci_dev, 0),
991			     pci_resource_len(pci_dev, 0));
992	dev->bmmio = (__u8 __iomem *)dev->lmmio;
993	if (NULL == dev->lmmio) {
994		err = -EIO;
995		printk(KERN_ERR "%s: can't ioremap() MMIO memory\n",
996		       dev->name);
997		goto fail2;
998	}
999
1000	/* initialize hardware #1 */
1001	saa7134_board_init1(dev);
1002	saa7134_hwinit1(dev);
1003
1004	dev->alloc_ctx = vb2_dma_sg_init_ctx(&pci_dev->dev);
1005	if (IS_ERR(dev->alloc_ctx)) {
1006		err = PTR_ERR(dev->alloc_ctx);
1007		goto fail3;
1008	}
1009	/* get irq */
1010	err = request_irq(pci_dev->irq, saa7134_irq,
1011			  IRQF_SHARED, dev->name, dev);
1012	if (err < 0) {
1013		printk(KERN_ERR "%s: can't get IRQ %d\n",
1014		       dev->name,pci_dev->irq);
1015		goto fail4;
1016	}
1017
1018	/* wait a bit, register i2c bus */
1019	msleep(100);
1020	saa7134_i2c_register(dev);
1021	saa7134_board_init2(dev);
1022
1023	saa7134_hwinit2(dev);
1024
1025	/* load i2c helpers */
1026	if (card_is_empress(dev)) {
1027		dev->empress_sd =
1028			v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
1029				"saa6752hs",
1030				saa7134_boards[dev->board].empress_addr, NULL);
1031
1032		if (dev->empress_sd)
1033			dev->empress_sd->grp_id = GRP_EMPRESS;
1034	}
1035
1036	if (saa7134_boards[dev->board].rds_addr) {
1037		struct v4l2_subdev *sd;
1038
1039		sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
1040				&dev->i2c_adap, "saa6588",
1041				0, I2C_ADDRS(saa7134_boards[dev->board].rds_addr));
1042		if (sd) {
1043			printk(KERN_INFO "%s: found RDS decoder\n", dev->name);
1044			dev->has_rds = 1;
1045		}
1046	}
1047
1048	mutex_lock(&saa7134_devlist_lock);
1049	list_for_each_entry(mops, &mops_list, next)
1050		mpeg_ops_attach(mops, dev);
1051	list_add_tail(&dev->devlist, &saa7134_devlist);
1052	mutex_unlock(&saa7134_devlist_lock);
1053
1054	/* check for signal */
1055	saa7134_irq_video_signalchange(dev);
1056
1057	if (TUNER_ABSENT != dev->tuner_type)
1058		saa_call_all(dev, core, s_power, 0);
1059
1060	/* register v4l devices */
1061	if (saa7134_no_overlay > 0)
1062		printk(KERN_INFO "%s: Overlay support disabled.\n", dev->name);
1063
1064	dev->video_dev = vdev_init(dev,&saa7134_video_template,"video");
1065	dev->video_dev->ctrl_handler = &dev->ctrl_handler;
1066	dev->video_dev->lock = &dev->lock;
1067	dev->video_dev->queue = &dev->video_vbq;
1068	err = video_register_device(dev->video_dev,VFL_TYPE_GRABBER,
1069				    video_nr[dev->nr]);
1070	if (err < 0) {
1071		printk(KERN_INFO "%s: can't register video device\n",
1072		       dev->name);
1073		goto fail5;
1074	}
1075	printk(KERN_INFO "%s: registered device %s [v4l2]\n",
1076	       dev->name, video_device_node_name(dev->video_dev));
1077
1078	dev->vbi_dev = vdev_init(dev, &saa7134_video_template, "vbi");
1079	dev->vbi_dev->ctrl_handler = &dev->ctrl_handler;
1080	dev->vbi_dev->lock = &dev->lock;
1081	dev->vbi_dev->queue = &dev->vbi_vbq;
1082
1083	err = video_register_device(dev->vbi_dev,VFL_TYPE_VBI,
1084				    vbi_nr[dev->nr]);
1085	if (err < 0)
1086		goto fail5;
1087	printk(KERN_INFO "%s: registered device %s\n",
1088	       dev->name, video_device_node_name(dev->vbi_dev));
1089
1090	if (card_has_radio(dev)) {
1091		dev->radio_dev = vdev_init(dev,&saa7134_radio_template,"radio");
1092		dev->radio_dev->ctrl_handler = &dev->radio_ctrl_handler;
1093		dev->radio_dev->lock = &dev->lock;
1094		err = video_register_device(dev->radio_dev,VFL_TYPE_RADIO,
1095					    radio_nr[dev->nr]);
1096		if (err < 0)
1097			goto fail5;
1098		printk(KERN_INFO "%s: registered device %s\n",
1099		       dev->name, video_device_node_name(dev->radio_dev));
1100	}
1101
1102	/* everything worked */
1103	saa7134_devcount++;
1104
1105	if (saa7134_dmasound_init && !dev->dmasound.priv_data)
1106		saa7134_dmasound_init(dev);
1107
1108	request_submodules(dev);
1109	return 0;
1110
1111 fail5:
1112	saa7134_unregister_video(dev);
1113	saa7134_i2c_unregister(dev);
1114	free_irq(pci_dev->irq, dev);
1115 fail4:
1116	vb2_dma_sg_cleanup_ctx(dev->alloc_ctx);
1117 fail3:
1118	saa7134_hwfini(dev);
1119	iounmap(dev->lmmio);
1120 fail2:
1121	release_mem_region(pci_resource_start(pci_dev,0),
1122			   pci_resource_len(pci_dev,0));
1123 fail1:
1124	v4l2_device_unregister(&dev->v4l2_dev);
1125 fail0:
1126	kfree(dev);
1127	return err;
1128}
1129
1130static void saa7134_finidev(struct pci_dev *pci_dev)
1131{
1132	struct v4l2_device *v4l2_dev = pci_get_drvdata(pci_dev);
1133	struct saa7134_dev *dev = container_of(v4l2_dev, struct saa7134_dev, v4l2_dev);
1134	struct saa7134_mpeg_ops *mops;
1135
1136	flush_request_submodules(dev);
1137
1138	/* Release DMA sound modules if present */
1139	if (saa7134_dmasound_exit && dev->dmasound.priv_data) {
1140		saa7134_dmasound_exit(dev);
1141	}
1142
1143	/* debugging ... */
1144	if (irq_debug) {
1145		u32 report = saa_readl(SAA7134_IRQ_REPORT);
1146		u32 status = saa_readl(SAA7134_IRQ_STATUS);
1147		print_irqstatus(dev,42,report,status);
1148	}
1149
1150	/* disable peripheral devices */
1151	saa_writeb(SAA7134_SPECIAL_MODE,0);
1152
1153	/* shutdown hardware */
1154	saa_writel(SAA7134_IRQ1,0);
1155	saa_writel(SAA7134_IRQ2,0);
1156	saa_writel(SAA7134_MAIN_CTRL,0);
1157
1158	/* shutdown subsystems */
1159	saa7134_hwfini(dev);
1160
1161	/* unregister */
1162	mutex_lock(&saa7134_devlist_lock);
1163	list_del(&dev->devlist);
1164	list_for_each_entry(mops, &mops_list, next)
1165		mpeg_ops_detach(mops, dev);
1166	mutex_unlock(&saa7134_devlist_lock);
1167	saa7134_devcount--;
1168
1169	saa7134_i2c_unregister(dev);
1170	saa7134_unregister_video(dev);
1171
1172
1173	/* the DMA sound modules should be unloaded before reaching
1174	   this, but just in case they are still present... */
1175	if (dev->dmasound.priv_data != NULL) {
1176		free_irq(pci_dev->irq, &dev->dmasound);
1177		dev->dmasound.priv_data = NULL;
1178	}
1179
1180
1181	/* release resources */
1182	free_irq(pci_dev->irq, dev);
1183	vb2_dma_sg_cleanup_ctx(dev->alloc_ctx);
1184	iounmap(dev->lmmio);
1185	release_mem_region(pci_resource_start(pci_dev,0),
1186			   pci_resource_len(pci_dev,0));
1187
1188
1189	v4l2_device_unregister(&dev->v4l2_dev);
1190
1191	/* free memory */
1192	kfree(dev);
1193}
1194
1195#ifdef CONFIG_PM
1196
1197/* resends a current buffer in queue after resume */
1198static int saa7134_buffer_requeue(struct saa7134_dev *dev,
1199				  struct saa7134_dmaqueue *q)
1200{
1201	struct saa7134_buf *buf, *next;
1202
1203	assert_spin_locked(&dev->slock);
1204
1205	buf  = q->curr;
1206	next = buf;
1207	dprintk("buffer_requeue\n");
1208
1209	if (!buf)
1210		return 0;
1211
1212	dprintk("buffer_requeue : resending active buffers \n");
1213
1214	if (!list_empty(&q->queue))
1215		next = list_entry(q->queue.next, struct saa7134_buf,
1216					  entry);
1217	buf->activate(dev, buf, next);
1218
1219	return 0;
1220}
1221
1222static int saa7134_suspend(struct pci_dev *pci_dev , pm_message_t state)
1223{
1224	struct v4l2_device *v4l2_dev = pci_get_drvdata(pci_dev);
1225	struct saa7134_dev *dev = container_of(v4l2_dev, struct saa7134_dev, v4l2_dev);
1226
1227	/* disable overlay - apps should enable it explicitly on resume*/
1228	dev->ovenable = 0;
1229
1230	/* Disable interrupts, DMA, and rest of the chip*/
1231	saa_writel(SAA7134_IRQ1, 0);
1232	saa_writel(SAA7134_IRQ2, 0);
1233	saa_writel(SAA7134_MAIN_CTRL, 0);
1234
1235	dev->insuspend = 1;
1236	synchronize_irq(pci_dev->irq);
1237
1238	/* ACK interrupts once more, just in case,
1239		since the IRQ handler won't ack them anymore*/
1240
1241	saa_writel(SAA7134_IRQ_REPORT, saa_readl(SAA7134_IRQ_REPORT));
1242
1243	/* Disable timeout timers - if we have active buffers, we will
1244	   fill them on resume*/
1245
1246	del_timer(&dev->video_q.timeout);
1247	del_timer(&dev->vbi_q.timeout);
1248	del_timer(&dev->ts_q.timeout);
1249
1250	if (dev->remote)
1251		saa7134_ir_stop(dev);
1252
1253	pci_save_state(pci_dev);
1254	pci_set_power_state(pci_dev, pci_choose_state(pci_dev, state));
1255
1256	return 0;
1257}
1258
1259static int saa7134_resume(struct pci_dev *pci_dev)
1260{
1261	struct v4l2_device *v4l2_dev = pci_get_drvdata(pci_dev);
1262	struct saa7134_dev *dev = container_of(v4l2_dev, struct saa7134_dev, v4l2_dev);
1263	unsigned long flags;
1264
1265	pci_set_power_state(pci_dev, PCI_D0);
1266	pci_restore_state(pci_dev);
1267
1268	/* Do things that are done in saa7134_initdev ,
1269		except of initializing memory structures.*/
1270
1271	saa7134_board_init1(dev);
1272
1273	/* saa7134_hwinit1 */
1274	if (saa7134_boards[dev->board].video_out)
1275		saa7134_videoport_init(dev);
1276	if (card_has_mpeg(dev))
1277		saa7134_ts_init_hw(dev);
1278	if (dev->remote)
1279		saa7134_ir_start(dev);
1280	saa7134_hw_enable1(dev);
1281
1282	msleep(100);
1283
1284	saa7134_board_init2(dev);
1285
1286	/*saa7134_hwinit2*/
1287	saa7134_set_tvnorm_hw(dev);
1288	saa7134_tvaudio_setmute(dev);
1289	saa7134_tvaudio_setvolume(dev, dev->ctl_volume);
1290	saa7134_tvaudio_init(dev);
1291	saa7134_enable_i2s(dev);
1292	saa7134_hw_enable2(dev);
1293
1294	saa7134_irq_video_signalchange(dev);
1295
1296	/*resume unfinished buffer(s)*/
1297	spin_lock_irqsave(&dev->slock, flags);
1298	saa7134_buffer_requeue(dev, &dev->video_q);
1299	saa7134_buffer_requeue(dev, &dev->vbi_q);
1300	saa7134_buffer_requeue(dev, &dev->ts_q);
1301
1302	/* FIXME: Disable DMA audio sound - temporary till proper support
1303		  is implemented*/
1304
1305	dev->dmasound.dma_running = 0;
1306
1307	/* start DMA now*/
1308	dev->insuspend = 0;
1309	smp_wmb();
1310	saa7134_set_dmabits(dev);
1311	spin_unlock_irqrestore(&dev->slock, flags);
1312
1313	return 0;
1314}
1315#endif
1316
1317/* ----------------------------------------------------------- */
1318
1319int saa7134_ts_register(struct saa7134_mpeg_ops *ops)
1320{
1321	struct saa7134_dev *dev;
1322
1323	mutex_lock(&saa7134_devlist_lock);
1324	list_for_each_entry(dev, &saa7134_devlist, devlist)
1325		mpeg_ops_attach(ops, dev);
1326	list_add_tail(&ops->next,&mops_list);
1327	mutex_unlock(&saa7134_devlist_lock);
1328	return 0;
1329}
1330
1331void saa7134_ts_unregister(struct saa7134_mpeg_ops *ops)
1332{
1333	struct saa7134_dev *dev;
1334
1335	mutex_lock(&saa7134_devlist_lock);
1336	list_del(&ops->next);
1337	list_for_each_entry(dev, &saa7134_devlist, devlist)
1338		mpeg_ops_detach(ops, dev);
1339	mutex_unlock(&saa7134_devlist_lock);
1340}
1341
1342EXPORT_SYMBOL(saa7134_ts_register);
1343EXPORT_SYMBOL(saa7134_ts_unregister);
1344
1345/* ----------------------------------------------------------- */
1346
1347static struct pci_driver saa7134_pci_driver = {
1348	.name     = "saa7134",
1349	.id_table = saa7134_pci_tbl,
1350	.probe    = saa7134_initdev,
1351	.remove   = saa7134_finidev,
1352#ifdef CONFIG_PM
1353	.suspend  = saa7134_suspend,
1354	.resume   = saa7134_resume
1355#endif
1356};
1357
1358static int __init saa7134_init(void)
1359{
1360	INIT_LIST_HEAD(&saa7134_devlist);
1361	printk(KERN_INFO "saa7130/34: v4l2 driver version %s loaded\n",
1362	       SAA7134_VERSION);
1363	return pci_register_driver(&saa7134_pci_driver);
1364}
1365
1366static void __exit saa7134_fini(void)
1367{
1368	pci_unregister_driver(&saa7134_pci_driver);
1369}
1370
1371module_init(saa7134_init);
1372module_exit(saa7134_fini);
1373
1374/* ----------------------------------------------------------- */
1375
1376EXPORT_SYMBOL(saa7134_set_gpio);
1377EXPORT_SYMBOL(saa7134_boards);
1378
1379/* ----------------- for the DMA sound modules --------------- */
1380
1381EXPORT_SYMBOL(saa7134_dmasound_init);
1382EXPORT_SYMBOL(saa7134_dmasound_exit);
1383EXPORT_SYMBOL(saa7134_pgtable_free);
1384EXPORT_SYMBOL(saa7134_pgtable_build);
1385EXPORT_SYMBOL(saa7134_pgtable_alloc);
1386EXPORT_SYMBOL(saa7134_set_dmabits);
1387