1/* $Id: hysdn_procconf.c,v 1.8.6.4 2001/09/23 22:24:54 kai Exp $
2 *
3 * Linux driver for HYSDN cards, /proc/net filesystem dir and conf functions.
4 *
5 * written by Werner Cornelius (werner@titro.de) for Hypercope GmbH
6 *
7 * Copyright 1999  by Werner Cornelius (werner@titro.de)
8 *
9 * This software may be used and distributed according to the terms
10 * of the GNU General Public License, incorporated herein by reference.
11 *
12 */
13
14#include <linux/cred.h>
15#include <linux/module.h>
16#include <linux/poll.h>
17#include <linux/proc_fs.h>
18#include <linux/pci.h>
19#include <linux/slab.h>
20#include <linux/mutex.h>
21#include <net/net_namespace.h>
22
23#include "hysdn_defs.h"
24
25static DEFINE_MUTEX(hysdn_conf_mutex);
26
27#define INFO_OUT_LEN 80		/* length of info line including lf */
28
29/********************************************************/
30/* defines and data structure for conf write operations */
31/********************************************************/
32#define CONF_STATE_DETECT 0	/* waiting for detect */
33#define CONF_STATE_CONF   1	/* writing config data */
34#define CONF_STATE_POF    2	/* writing pof data */
35#define CONF_LINE_LEN   255	/* 255 chars max */
36
37struct conf_writedata {
38	hysdn_card *card;	/* card the device is connected to */
39	int buf_size;		/* actual number of bytes in the buffer */
40	int needed_size;	/* needed size when reading pof */
41	int state;		/* actual interface states from above constants */
42	unsigned char conf_line[CONF_LINE_LEN];	/* buffered conf line */
43	unsigned short channel;		/* active channel number */
44	unsigned char *pof_buffer;	/* buffer when writing pof */
45};
46
47/***********************************************************************/
48/* process_line parses one config line and transfers it to the card if */
49/* necessary.                                                          */
50/* if the return value is negative an error occurred.                   */
51/***********************************************************************/
52static int
53process_line(struct conf_writedata *cnf)
54{
55	unsigned char *cp = cnf->conf_line;
56	int i;
57
58	if (cnf->card->debug_flags & LOG_CNF_LINE)
59		hysdn_addlog(cnf->card, "conf line: %s", cp);
60
61	if (*cp == '-') {	/* option */
62		cp++;		/* point to option char */
63
64		if (*cp++ != 'c')
65			return (0);	/* option unknown or used */
66		i = 0;		/* start value for channel */
67		while ((*cp <= '9') && (*cp >= '0'))
68			i = i * 10 + *cp++ - '0';	/* get decimal number */
69		if (i > 65535) {
70			if (cnf->card->debug_flags & LOG_CNF_MISC)
71				hysdn_addlog(cnf->card, "conf channel invalid  %d", i);
72			return (-ERR_INV_CHAN);		/* invalid channel */
73		}
74		cnf->channel = i & 0xFFFF;	/* set new channel number */
75		return (0);	/* success */
76	}			/* option */
77	if (*cp == '*') {	/* line to send */
78		if (cnf->card->debug_flags & LOG_CNF_DATA)
79			hysdn_addlog(cnf->card, "conf chan=%d %s", cnf->channel, cp);
80		return (hysdn_tx_cfgline(cnf->card, cnf->conf_line + 1,
81					 cnf->channel));	/* send the line without * */
82	}			/* line to send */
83	return (0);
84}				/* process_line */
85
86/***********************************/
87/* conf file operations and tables */
88/***********************************/
89
90/****************************************************/
91/* write conf file -> boot or send cfg line to card */
92/****************************************************/
93static ssize_t
94hysdn_conf_write(struct file *file, const char __user *buf, size_t count, loff_t *off)
95{
96	struct conf_writedata *cnf;
97	int i;
98	unsigned char ch, *cp;
99
100	if (!count)
101		return (0);	/* nothing to handle */
102
103	if (!(cnf = file->private_data))
104		return (-EFAULT);	/* should never happen */
105
106	if (cnf->state == CONF_STATE_DETECT) {	/* auto detect cnf or pof data */
107		if (copy_from_user(&ch, buf, 1))	/* get first char for detect */
108			return (-EFAULT);
109
110		if (ch == 0x1A) {
111			/* we detected a pof file */
112			if ((cnf->needed_size = pof_write_open(cnf->card, &cnf->pof_buffer)) <= 0)
113				return (cnf->needed_size);	/* an error occurred -> exit */
114			cnf->buf_size = 0;	/* buffer is empty */
115			cnf->state = CONF_STATE_POF;	/* new state */
116		} else {
117			/* conf data has been detected */
118			cnf->buf_size = 0;	/* buffer is empty */
119			cnf->state = CONF_STATE_CONF;	/* requested conf data write */
120			if (cnf->card->state != CARD_STATE_RUN)
121				return (-ERR_NOT_BOOTED);
122			cnf->conf_line[CONF_LINE_LEN - 1] = 0;	/* limit string length */
123			cnf->channel = 4098;	/* default channel for output */
124		}
125	}			/* state was auto detect */
126	if (cnf->state == CONF_STATE_POF) {	/* pof write active */
127		i = cnf->needed_size - cnf->buf_size;	/* bytes still missing for write */
128		if (i <= 0)
129			return (-EINVAL);	/* size error handling pof */
130
131		if (i < count)
132			count = i;	/* limit requested number of bytes */
133		if (copy_from_user(cnf->pof_buffer + cnf->buf_size, buf, count))
134			return (-EFAULT);	/* error while copying */
135		cnf->buf_size += count;
136
137		if (cnf->needed_size == cnf->buf_size) {
138			cnf->needed_size = pof_write_buffer(cnf->card, cnf->buf_size);	/* write data */
139			if (cnf->needed_size <= 0) {
140				cnf->card->state = CARD_STATE_BOOTERR;	/* show boot error */
141				return (cnf->needed_size);	/* an error occurred */
142			}
143			cnf->buf_size = 0;	/* buffer is empty again */
144		}
145	}
146	/* pof write active */
147	else {			/* conf write active */
148
149		if (cnf->card->state != CARD_STATE_RUN) {
150			if (cnf->card->debug_flags & LOG_CNF_MISC)
151				hysdn_addlog(cnf->card, "cnf write denied -> not booted");
152			return (-ERR_NOT_BOOTED);
153		}
154		i = (CONF_LINE_LEN - 1) - cnf->buf_size;	/* bytes available in buffer */
155		if (i > 0) {
156			/* copy remaining bytes into buffer */
157
158			if (count > i)
159				count = i;	/* limit transfer */
160			if (copy_from_user(cnf->conf_line + cnf->buf_size, buf, count))
161				return (-EFAULT);	/* error while copying */
162
163			i = count;	/* number of chars in buffer */
164			cp = cnf->conf_line + cnf->buf_size;
165			while (i) {
166				/* search for end of line */
167				if ((*cp < ' ') && (*cp != 9))
168					break;	/* end of line found */
169				cp++;
170				i--;
171			}	/* search for end of line */
172
173			if (i) {
174				/* delimiter found */
175				*cp++ = 0;	/* string termination */
176				count -= (i - 1);	/* subtract remaining bytes from count */
177				while ((i) && (*cp < ' ') && (*cp != 9)) {
178					i--;	/* discard next char */
179					count++;	/* mark as read */
180					cp++;	/* next char */
181				}
182				cnf->buf_size = 0;	/* buffer is empty after transfer */
183				if ((i = process_line(cnf)) < 0)	/* handle the line */
184					count = i;	/* return the error */
185			}
186			/* delimiter found */
187			else {
188				cnf->buf_size += count;		/* add chars to string */
189				if (cnf->buf_size >= CONF_LINE_LEN - 1) {
190					if (cnf->card->debug_flags & LOG_CNF_MISC)
191						hysdn_addlog(cnf->card, "cnf line too long %d chars pos %d", cnf->buf_size, count);
192					return (-ERR_CONF_LONG);
193				}
194			}	/* not delimited */
195
196		}
197		/* copy remaining bytes into buffer */
198		else {
199			if (cnf->card->debug_flags & LOG_CNF_MISC)
200				hysdn_addlog(cnf->card, "cnf line too long");
201			return (-ERR_CONF_LONG);
202		}
203	}			/* conf write active */
204
205	return (count);
206}				/* hysdn_conf_write */
207
208/*******************************************/
209/* read conf file -> output card info data */
210/*******************************************/
211static ssize_t
212hysdn_conf_read(struct file *file, char __user *buf, size_t count, loff_t *off)
213{
214	char *cp;
215
216	if (!(file->f_mode & FMODE_READ))
217		return -EPERM;	/* no permission to read */
218
219	if (!(cp = file->private_data))
220		return -EFAULT;	/* should never happen */
221
222	return simple_read_from_buffer(buf, count, off, cp, strlen(cp));
223}				/* hysdn_conf_read */
224
225/******************/
226/* open conf file */
227/******************/
228static int
229hysdn_conf_open(struct inode *ino, struct file *filep)
230{
231	hysdn_card *card;
232	struct conf_writedata *cnf;
233	char *cp, *tmp;
234
235	/* now search the addressed card */
236	mutex_lock(&hysdn_conf_mutex);
237	card = PDE_DATA(ino);
238	if (card->debug_flags & (LOG_PROC_OPEN | LOG_PROC_ALL))
239		hysdn_addlog(card, "config open for uid=%d gid=%d mode=0x%x",
240			     filep->f_cred->fsuid, filep->f_cred->fsgid,
241			     filep->f_mode);
242
243	if ((filep->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_WRITE) {
244		/* write only access -> write boot file or conf line */
245
246		if (!(cnf = kmalloc(sizeof(struct conf_writedata), GFP_KERNEL))) {
247			mutex_unlock(&hysdn_conf_mutex);
248			return (-EFAULT);
249		}
250		cnf->card = card;
251		cnf->buf_size = 0;	/* nothing buffered */
252		cnf->state = CONF_STATE_DETECT;		/* start auto detect */
253		filep->private_data = cnf;
254
255	} else if ((filep->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_READ) {
256		/* read access -> output card info data */
257
258		if (!(tmp = kmalloc(INFO_OUT_LEN * 2 + 2, GFP_KERNEL))) {
259			mutex_unlock(&hysdn_conf_mutex);
260			return (-EFAULT);	/* out of memory */
261		}
262		filep->private_data = tmp;	/* start of string */
263
264		/* first output a headline */
265		sprintf(tmp, "id bus slot type irq iobase dp-mem     b-chans fax-chans state device");
266		cp = tmp;	/* start of string */
267		while (*cp)
268			cp++;
269		while (((cp - tmp) % (INFO_OUT_LEN + 1)) != INFO_OUT_LEN)
270			*cp++ = ' ';
271		*cp++ = '\n';
272
273		/* and now the data */
274		sprintf(cp, "%d  %3d %4d %4d %3d 0x%04x 0x%08lx %7d %9d %3d   %s",
275			card->myid,
276			card->bus,
277			PCI_SLOT(card->devfn),
278			card->brdtype,
279			card->irq,
280			card->iobase,
281			card->membase,
282			card->bchans,
283			card->faxchans,
284			card->state,
285			hysdn_net_getname(card));
286		while (*cp)
287			cp++;
288		while (((cp - tmp) % (INFO_OUT_LEN + 1)) != INFO_OUT_LEN)
289			*cp++ = ' ';
290		*cp++ = '\n';
291		*cp = 0;	/* end of string */
292	} else {		/* simultaneous read/write access forbidden ! */
293		mutex_unlock(&hysdn_conf_mutex);
294		return (-EPERM);	/* no permission this time */
295	}
296	mutex_unlock(&hysdn_conf_mutex);
297	return nonseekable_open(ino, filep);
298}				/* hysdn_conf_open */
299
300/***************************/
301/* close a config file.    */
302/***************************/
303static int
304hysdn_conf_close(struct inode *ino, struct file *filep)
305{
306	hysdn_card *card;
307	struct conf_writedata *cnf;
308	int retval = 0;
309
310	mutex_lock(&hysdn_conf_mutex);
311	card = PDE_DATA(ino);
312	if (card->debug_flags & (LOG_PROC_OPEN | LOG_PROC_ALL))
313		hysdn_addlog(card, "config close for uid=%d gid=%d mode=0x%x",
314			     filep->f_cred->fsuid, filep->f_cred->fsgid,
315			     filep->f_mode);
316
317	if ((filep->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_WRITE) {
318		/* write only access -> write boot file or conf line */
319		if (filep->private_data) {
320			cnf = filep->private_data;
321
322			if (cnf->state == CONF_STATE_POF)
323				retval = pof_write_close(cnf->card);	/* close the pof write */
324			kfree(filep->private_data);	/* free allocated memory for buffer */
325
326		}		/* handle write private data */
327	} else if ((filep->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_READ) {
328		/* read access -> output card info data */
329
330		kfree(filep->private_data);	/* release memory */
331	}
332	mutex_unlock(&hysdn_conf_mutex);
333	return (retval);
334}				/* hysdn_conf_close */
335
336/******************************************************/
337/* table for conf filesystem functions defined above. */
338/******************************************************/
339static const struct file_operations conf_fops =
340{
341	.owner		= THIS_MODULE,
342	.llseek         = no_llseek,
343	.read           = hysdn_conf_read,
344	.write          = hysdn_conf_write,
345	.open           = hysdn_conf_open,
346	.release        = hysdn_conf_close,
347};
348
349/*****************************/
350/* hysdn subdir in /proc/net */
351/*****************************/
352struct proc_dir_entry *hysdn_proc_entry = NULL;
353
354/*******************************************************************************/
355/* hysdn_procconf_init is called when the module is loaded and after the cards */
356/* have been detected. The needed proc dir and card config files are created.  */
357/* The log init is called at last.                                             */
358/*******************************************************************************/
359int
360hysdn_procconf_init(void)
361{
362	hysdn_card *card;
363	unsigned char conf_name[20];
364
365	hysdn_proc_entry = proc_mkdir(PROC_SUBDIR_NAME, init_net.proc_net);
366	if (!hysdn_proc_entry) {
367		printk(KERN_ERR "HYSDN: unable to create hysdn subdir\n");
368		return (-1);
369	}
370	card = card_root;	/* point to first card */
371	while (card) {
372
373		sprintf(conf_name, "%s%d", PROC_CONF_BASENAME, card->myid);
374		if ((card->procconf = (void *) proc_create_data(conf_name,
375							   S_IFREG | S_IRUGO | S_IWUSR,
376							   hysdn_proc_entry,
377							   &conf_fops,
378							   card)) != NULL) {
379			hysdn_proclog_init(card);	/* init the log file entry */
380		}
381		card = card->next;	/* next entry */
382	}
383
384	printk(KERN_NOTICE "HYSDN: procfs initialised\n");
385	return (0);
386}				/* hysdn_procconf_init */
387
388/*************************************************************************************/
389/* hysdn_procconf_release is called when the module is unloaded and before the cards */
390/* resources are released. The module counter is assumed to be 0 !                   */
391/*************************************************************************************/
392void
393hysdn_procconf_release(void)
394{
395	hysdn_card *card;
396	unsigned char conf_name[20];
397
398	card = card_root;	/* start with first card */
399	while (card) {
400
401		sprintf(conf_name, "%s%d", PROC_CONF_BASENAME, card->myid);
402		if (card->procconf)
403			remove_proc_entry(conf_name, hysdn_proc_entry);
404
405		hysdn_proclog_release(card);	/* init the log file entry */
406
407		card = card->next;	/* point to next card */
408	}
409
410	remove_proc_entry(PROC_SUBDIR_NAME, init_net.proc_net);
411}
412