1/* $Id: hycapi.c,v 1.8.6.4 2001/09/23 22:24:54 kai Exp $
2 *
3 * Linux driver for HYSDN cards, CAPI2.0-Interface.
4 *
5 * Author    Ulrich Albrecht <u.albrecht@hypercope.de> for Hypercope GmbH
6 * Copyright 2000 by Hypercope GmbH
7 *
8 * This software may be used and distributed according to the terms
9 * of the GNU General Public License, incorporated herein by reference.
10 *
11 */
12
13#include <linux/module.h>
14#include <linux/proc_fs.h>
15#include <linux/seq_file.h>
16#include <linux/signal.h>
17#include <linux/kernel.h>
18#include <linux/skbuff.h>
19#include <linux/netdevice.h>
20#include <linux/slab.h>
21
22#define	VER_DRIVER	0
23#define	VER_CARDTYPE	1
24#define	VER_HWID	2
25#define	VER_SERIAL	3
26#define	VER_OPTION	4
27#define	VER_PROTO	5
28#define	VER_PROFILE	6
29#define	VER_CAPI	7
30
31#include "hysdn_defs.h"
32#include <linux/kernelcapi.h>
33
34static char hycapi_revision[] = "$Revision: 1.8.6.4 $";
35
36unsigned int hycapi_enable = 0xffffffff;
37module_param(hycapi_enable, uint, 0);
38
39typedef struct _hycapi_appl {
40	unsigned int ctrl_mask;
41	capi_register_params rp;
42	struct sk_buff *listen_req[CAPI_MAXCONTR];
43} hycapi_appl;
44
45static hycapi_appl hycapi_applications[CAPI_MAXAPPL];
46
47static u16 hycapi_send_message(struct capi_ctr *ctrl, struct sk_buff *skb);
48
49static inline int _hycapi_appCheck(int app_id, int ctrl_no)
50{
51	if ((ctrl_no <= 0) || (ctrl_no > CAPI_MAXCONTR) || (app_id <= 0) ||
52	   (app_id > CAPI_MAXAPPL))
53	{
54		printk(KERN_ERR "HYCAPI: Invalid request app_id %d for controller %d", app_id, ctrl_no);
55		return -1;
56	}
57	return ((hycapi_applications[app_id - 1].ctrl_mask & (1 << (ctrl_no-1))) != 0);
58}
59
60/******************************
61Kernel-Capi callback reset_ctr
62******************************/
63
64static void
65hycapi_reset_ctr(struct capi_ctr *ctrl)
66{
67	hycapictrl_info *cinfo = ctrl->driverdata;
68
69#ifdef HYCAPI_PRINTFNAMES
70	printk(KERN_NOTICE "HYCAPI hycapi_reset_ctr\n");
71#endif
72	capilib_release(&cinfo->ncci_head);
73	capi_ctr_down(ctrl);
74}
75
76/******************************
77Kernel-Capi callback remove_ctr
78******************************/
79
80static void
81hycapi_remove_ctr(struct capi_ctr *ctrl)
82{
83	int i;
84	hycapictrl_info *cinfo = NULL;
85	hysdn_card *card = NULL;
86#ifdef HYCAPI_PRINTFNAMES
87	printk(KERN_NOTICE "HYCAPI hycapi_remove_ctr\n");
88#endif
89	cinfo = (hycapictrl_info *)(ctrl->driverdata);
90	if (!cinfo) {
91		printk(KERN_ERR "No hycapictrl_info set!");
92		return;
93	}
94	card = cinfo->card;
95	capi_ctr_suspend_output(ctrl);
96	for (i = 0; i < CAPI_MAXAPPL; i++) {
97		if (hycapi_applications[i].listen_req[ctrl->cnr - 1]) {
98			kfree_skb(hycapi_applications[i].listen_req[ctrl->cnr - 1]);
99			hycapi_applications[i].listen_req[ctrl->cnr - 1] = NULL;
100		}
101	}
102	detach_capi_ctr(ctrl);
103	ctrl->driverdata = NULL;
104	kfree(card->hyctrlinfo);
105
106
107	card->hyctrlinfo = NULL;
108}
109
110/***********************************************************
111
112Queue a CAPI-message to the controller.
113
114***********************************************************/
115
116static void
117hycapi_sendmsg_internal(struct capi_ctr *ctrl, struct sk_buff *skb)
118{
119	hycapictrl_info *cinfo = (hycapictrl_info *)(ctrl->driverdata);
120	hysdn_card *card = cinfo->card;
121
122	spin_lock_irq(&cinfo->lock);
123#ifdef HYCAPI_PRINTFNAMES
124	printk(KERN_NOTICE "hycapi_send_message\n");
125#endif
126	cinfo->skbs[cinfo->in_idx++] = skb;	/* add to buffer list */
127	if (cinfo->in_idx >= HYSDN_MAX_CAPI_SKB)
128		cinfo->in_idx = 0;	/* wrap around */
129	cinfo->sk_count++;		/* adjust counter */
130	if (cinfo->sk_count >= HYSDN_MAX_CAPI_SKB) {
131		/* inform upper layers we're full */
132		printk(KERN_ERR "HYSDN Card%d: CAPI-buffer overrun!\n",
133		       card->myid);
134		capi_ctr_suspend_output(ctrl);
135	}
136	cinfo->tx_skb = skb;
137	spin_unlock_irq(&cinfo->lock);
138	schedule_work(&card->irq_queue);
139}
140
141/***********************************************************
142hycapi_register_internal
143
144Send down the CAPI_REGISTER-Command to the controller.
145This functions will also be used if the adapter has been rebooted to
146re-register any applications in the private list.
147
148************************************************************/
149
150static void
151hycapi_register_internal(struct capi_ctr *ctrl, __u16 appl,
152			 capi_register_params *rp)
153{
154	char ExtFeatureDefaults[] = "49  /0/0/0/0,*/1,*/2,*/3,*/4,*/5,*/6,*/7,*/8,*/9,*";
155	hycapictrl_info *cinfo = (hycapictrl_info *)(ctrl->driverdata);
156	hysdn_card *card = cinfo->card;
157	struct sk_buff *skb;
158	__u16 len;
159	__u8 _command = 0xa0, _subcommand = 0x80;
160	__u16 MessageNumber = 0x0000;
161	__u16 MessageBufferSize = 0;
162	int slen = strlen(ExtFeatureDefaults);
163#ifdef HYCAPI_PRINTFNAMES
164	printk(KERN_NOTICE "hycapi_register_appl\n");
165#endif
166	MessageBufferSize = rp->level3cnt * rp->datablkcnt * rp->datablklen;
167
168	len = CAPI_MSG_BASELEN + 8 + slen + 1;
169	if (!(skb = alloc_skb(len, GFP_ATOMIC))) {
170		printk(KERN_ERR "HYSDN card%d: memory squeeze in hycapi_register_appl\n",
171		       card->myid);
172		return;
173	}
174	memcpy(skb_put(skb, sizeof(__u16)), &len, sizeof(__u16));
175	memcpy(skb_put(skb, sizeof(__u16)), &appl, sizeof(__u16));
176	memcpy(skb_put(skb, sizeof(__u8)), &_command, sizeof(_command));
177	memcpy(skb_put(skb, sizeof(__u8)), &_subcommand, sizeof(_subcommand));
178	memcpy(skb_put(skb, sizeof(__u16)), &MessageNumber, sizeof(__u16));
179	memcpy(skb_put(skb, sizeof(__u16)), &MessageBufferSize, sizeof(__u16));
180	memcpy(skb_put(skb, sizeof(__u16)), &(rp->level3cnt), sizeof(__u16));
181	memcpy(skb_put(skb, sizeof(__u16)), &(rp->datablkcnt), sizeof(__u16));
182	memcpy(skb_put(skb, sizeof(__u16)), &(rp->datablklen), sizeof(__u16));
183	memcpy(skb_put(skb, slen), ExtFeatureDefaults, slen);
184	hycapi_applications[appl - 1].ctrl_mask |= (1 << (ctrl->cnr - 1));
185	hycapi_send_message(ctrl, skb);
186}
187
188/************************************************************
189hycapi_restart_internal
190
191After an adapter has been rebootet, re-register all applications and
192send a LISTEN_REQ (if there has been such a thing )
193
194*************************************************************/
195
196static void hycapi_restart_internal(struct capi_ctr *ctrl)
197{
198	int i;
199	struct sk_buff *skb;
200#ifdef HYCAPI_PRINTFNAMES
201	printk(KERN_WARNING "HYSDN: hycapi_restart_internal");
202#endif
203	for (i = 0; i < CAPI_MAXAPPL; i++) {
204		if (_hycapi_appCheck(i + 1, ctrl->cnr) == 1) {
205			hycapi_register_internal(ctrl, i + 1,
206						 &hycapi_applications[i].rp);
207			if (hycapi_applications[i].listen_req[ctrl->cnr - 1]) {
208				skb = skb_copy(hycapi_applications[i].listen_req[ctrl->cnr - 1], GFP_ATOMIC);
209				hycapi_sendmsg_internal(ctrl, skb);
210			}
211		}
212	}
213}
214
215/*************************************************************
216Register an application.
217Error-checking is done for CAPI-compliance.
218
219The application is recorded in the internal list.
220*************************************************************/
221
222static void
223hycapi_register_appl(struct capi_ctr *ctrl, __u16 appl,
224		     capi_register_params *rp)
225{
226	int MaxLogicalConnections = 0, MaxBDataBlocks = 0, MaxBDataLen = 0;
227	hycapictrl_info *cinfo = (hycapictrl_info *)(ctrl->driverdata);
228	hysdn_card *card = cinfo->card;
229	int chk = _hycapi_appCheck(appl, ctrl->cnr);
230	if (chk < 0) {
231		return;
232	}
233	if (chk == 1) {
234		printk(KERN_INFO "HYSDN: apl %d already registered\n", appl);
235		return;
236	}
237	MaxBDataBlocks = rp->datablkcnt > CAPI_MAXDATAWINDOW ? CAPI_MAXDATAWINDOW : rp->datablkcnt;
238	rp->datablkcnt = MaxBDataBlocks;
239	MaxBDataLen = rp->datablklen < 1024 ? 1024 : rp->datablklen;
240	rp->datablklen = MaxBDataLen;
241
242	MaxLogicalConnections = rp->level3cnt;
243	if (MaxLogicalConnections < 0) {
244		MaxLogicalConnections = card->bchans * -MaxLogicalConnections;
245	}
246	if (MaxLogicalConnections == 0) {
247		MaxLogicalConnections = card->bchans;
248	}
249
250	rp->level3cnt = MaxLogicalConnections;
251	memcpy(&hycapi_applications[appl - 1].rp,
252	       rp, sizeof(capi_register_params));
253}
254
255/*********************************************************************
256
257hycapi_release_internal
258
259Send down a CAPI_RELEASE to the controller.
260*********************************************************************/
261
262static void hycapi_release_internal(struct capi_ctr *ctrl, __u16 appl)
263{
264	hycapictrl_info *cinfo = (hycapictrl_info *)(ctrl->driverdata);
265	hysdn_card *card = cinfo->card;
266	struct sk_buff *skb;
267	__u16 len;
268	__u8 _command = 0xa1, _subcommand = 0x80;
269	__u16 MessageNumber = 0x0000;
270
271	capilib_release_appl(&cinfo->ncci_head, appl);
272
273#ifdef HYCAPI_PRINTFNAMES
274	printk(KERN_NOTICE "hycapi_release_appl\n");
275#endif
276	len = CAPI_MSG_BASELEN;
277	if (!(skb = alloc_skb(len, GFP_ATOMIC))) {
278		printk(KERN_ERR "HYSDN card%d: memory squeeze in hycapi_register_appl\n",
279		       card->myid);
280		return;
281	}
282	memcpy(skb_put(skb, sizeof(__u16)), &len, sizeof(__u16));
283	memcpy(skb_put(skb, sizeof(__u16)), &appl, sizeof(__u16));
284	memcpy(skb_put(skb, sizeof(__u8)), &_command, sizeof(_command));
285	memcpy(skb_put(skb, sizeof(__u8)), &_subcommand, sizeof(_subcommand));
286	memcpy(skb_put(skb, sizeof(__u16)), &MessageNumber, sizeof(__u16));
287	hycapi_send_message(ctrl, skb);
288	hycapi_applications[appl - 1].ctrl_mask &= ~(1 << (ctrl->cnr - 1));
289}
290
291/******************************************************************
292hycapi_release_appl
293
294Release the application from the internal list an remove it's
295registration at controller-level
296******************************************************************/
297
298static void
299hycapi_release_appl(struct capi_ctr *ctrl, __u16 appl)
300{
301	int chk;
302
303	chk = _hycapi_appCheck(appl, ctrl->cnr);
304	if (chk < 0) {
305		printk(KERN_ERR "HYCAPI: Releasing invalid appl %d on controller %d\n", appl, ctrl->cnr);
306		return;
307	}
308	if (hycapi_applications[appl - 1].listen_req[ctrl->cnr - 1]) {
309		kfree_skb(hycapi_applications[appl - 1].listen_req[ctrl->cnr - 1]);
310		hycapi_applications[appl - 1].listen_req[ctrl->cnr - 1] = NULL;
311	}
312	if (chk == 1)
313	{
314		hycapi_release_internal(ctrl, appl);
315	}
316}
317
318
319/**************************************************************
320Kill a single controller.
321**************************************************************/
322
323int hycapi_capi_release(hysdn_card *card)
324{
325	hycapictrl_info *cinfo = card->hyctrlinfo;
326	struct capi_ctr *ctrl;
327#ifdef HYCAPI_PRINTFNAMES
328	printk(KERN_NOTICE "hycapi_capi_release\n");
329#endif
330	if (cinfo) {
331		ctrl = &cinfo->capi_ctrl;
332		hycapi_remove_ctr(ctrl);
333	}
334	return 0;
335}
336
337/**************************************************************
338hycapi_capi_stop
339
340Stop CAPI-Output on a card. (e.g. during reboot)
341***************************************************************/
342
343int hycapi_capi_stop(hysdn_card *card)
344{
345	hycapictrl_info *cinfo = card->hyctrlinfo;
346	struct capi_ctr *ctrl;
347#ifdef HYCAPI_PRINTFNAMES
348	printk(KERN_NOTICE "hycapi_capi_stop\n");
349#endif
350	if (cinfo) {
351		ctrl = &cinfo->capi_ctrl;
352/*		ctrl->suspend_output(ctrl); */
353		capi_ctr_down(ctrl);
354	}
355	return 0;
356}
357
358/***************************************************************
359hycapi_send_message
360
361Send a message to the controller.
362
363Messages are parsed for their Command/Subcommand-type, and appropriate
364action's are performed.
365
366Note that we have to muck around with a 64Bit-DATA_REQ as there are
367firmware-releases that do not check the MsgLen-Indication!
368
369***************************************************************/
370
371static u16 hycapi_send_message(struct capi_ctr *ctrl, struct sk_buff *skb)
372{
373	__u16 appl_id;
374	int _len, _len2;
375	__u8 msghead[64];
376	hycapictrl_info *cinfo = ctrl->driverdata;
377	u16 retval = CAPI_NOERROR;
378
379	appl_id = CAPIMSG_APPID(skb->data);
380	switch (_hycapi_appCheck(appl_id, ctrl->cnr))
381	{
382	case 0:
383/*			printk(KERN_INFO "Need to register\n"); */
384		hycapi_register_internal(ctrl,
385					 appl_id,
386					 &(hycapi_applications[appl_id - 1].rp));
387		break;
388	case 1:
389		break;
390	default:
391		printk(KERN_ERR "HYCAPI: Controller mixup!\n");
392		retval = CAPI_ILLAPPNR;
393		goto out;
394	}
395	switch (CAPIMSG_CMD(skb->data)) {
396	case CAPI_DISCONNECT_B3_RESP:
397		capilib_free_ncci(&cinfo->ncci_head, appl_id,
398				  CAPIMSG_NCCI(skb->data));
399		break;
400	case CAPI_DATA_B3_REQ:
401		_len = CAPIMSG_LEN(skb->data);
402		if (_len > 22) {
403			_len2 = _len - 22;
404			skb_copy_from_linear_data(skb, msghead, 22);
405			skb_copy_to_linear_data_offset(skb, _len2,
406						       msghead, 22);
407			skb_pull(skb, _len2);
408			CAPIMSG_SETLEN(skb->data, 22);
409			retval = capilib_data_b3_req(&cinfo->ncci_head,
410						     CAPIMSG_APPID(skb->data),
411						     CAPIMSG_NCCI(skb->data),
412						     CAPIMSG_MSGID(skb->data));
413		}
414		break;
415	case CAPI_LISTEN_REQ:
416		if (hycapi_applications[appl_id - 1].listen_req[ctrl->cnr - 1])
417		{
418			kfree_skb(hycapi_applications[appl_id - 1].listen_req[ctrl->cnr - 1]);
419			hycapi_applications[appl_id - 1].listen_req[ctrl->cnr - 1] = NULL;
420		}
421		if (!(hycapi_applications[appl_id  -1].listen_req[ctrl->cnr - 1] = skb_copy(skb, GFP_ATOMIC)))
422		{
423			printk(KERN_ERR "HYSDN: memory squeeze in private_listen\n");
424		}
425		break;
426	default:
427		break;
428	}
429out:
430	if (retval == CAPI_NOERROR)
431		hycapi_sendmsg_internal(ctrl, skb);
432	else
433		dev_kfree_skb_any(skb);
434
435	return retval;
436}
437
438static int hycapi_proc_show(struct seq_file *m, void *v)
439{
440	struct capi_ctr *ctrl = m->private;
441	hycapictrl_info *cinfo = (hycapictrl_info *)(ctrl->driverdata);
442	hysdn_card *card = cinfo->card;
443	char *s;
444
445	seq_printf(m, "%-16s %s\n", "name", cinfo->cardname);
446	seq_printf(m, "%-16s 0x%x\n", "io", card->iobase);
447	seq_printf(m, "%-16s %d\n", "irq", card->irq);
448
449	switch (card->brdtype) {
450	case BD_PCCARD:  s = "HYSDN Hycard"; break;
451	case BD_ERGO: s = "HYSDN Ergo2"; break;
452	case BD_METRO: s = "HYSDN Metro4"; break;
453	case BD_CHAMP2: s = "HYSDN Champ2";	break;
454	case BD_PLEXUS: s = "HYSDN Plexus30"; break;
455	default: s = "???"; break;
456	}
457	seq_printf(m, "%-16s %s\n", "type", s);
458	if ((s = cinfo->version[VER_DRIVER]) != NULL)
459		seq_printf(m, "%-16s %s\n", "ver_driver", s);
460	if ((s = cinfo->version[VER_CARDTYPE]) != NULL)
461		seq_printf(m, "%-16s %s\n", "ver_cardtype", s);
462	if ((s = cinfo->version[VER_SERIAL]) != NULL)
463		seq_printf(m, "%-16s %s\n", "ver_serial", s);
464
465	seq_printf(m, "%-16s %s\n", "cardname", cinfo->cardname);
466
467	return 0;
468}
469
470static int hycapi_proc_open(struct inode *inode, struct file *file)
471{
472	return single_open(file, hycapi_proc_show, PDE_DATA(inode));
473}
474
475static const struct file_operations hycapi_proc_fops = {
476	.owner		= THIS_MODULE,
477	.open		= hycapi_proc_open,
478	.read		= seq_read,
479	.llseek		= seq_lseek,
480	.release	= single_release,
481};
482
483/**************************************************************
484hycapi_load_firmware
485
486This does NOT load any firmware, but the callback somehow is needed
487on capi-interface registration.
488
489**************************************************************/
490
491static int hycapi_load_firmware(struct capi_ctr *ctrl, capiloaddata *data)
492{
493#ifdef HYCAPI_PRINTFNAMES
494	printk(KERN_NOTICE "hycapi_load_firmware\n");
495#endif
496	return 0;
497}
498
499
500static char *hycapi_procinfo(struct capi_ctr *ctrl)
501{
502	hycapictrl_info *cinfo = (hycapictrl_info *)(ctrl->driverdata);
503#ifdef HYCAPI_PRINTFNAMES
504	printk(KERN_NOTICE "%s\n", __func__);
505#endif
506	if (!cinfo)
507		return "";
508	sprintf(cinfo->infobuf, "%s %s 0x%x %d %s",
509		cinfo->cardname[0] ? cinfo->cardname : "-",
510		cinfo->version[VER_DRIVER] ? cinfo->version[VER_DRIVER] : "-",
511		cinfo->card ? cinfo->card->iobase : 0x0,
512		cinfo->card ? cinfo->card->irq : 0,
513		hycapi_revision
514		);
515	return cinfo->infobuf;
516}
517
518/******************************************************************
519hycapi_rx_capipkt
520
521Receive a capi-message.
522
523All B3_DATA_IND are converted to 64K-extension compatible format.
524New nccis are created if necessary.
525*******************************************************************/
526
527void
528hycapi_rx_capipkt(hysdn_card *card, unsigned char *buf, unsigned short len)
529{
530	struct sk_buff *skb;
531	hycapictrl_info *cinfo = card->hyctrlinfo;
532	struct capi_ctr *ctrl;
533	__u16 ApplId;
534	__u16 MsgLen, info;
535	__u16 len2, CapiCmd;
536	__u32 CP64[2] = {0, 0};
537#ifdef HYCAPI_PRINTFNAMES
538	printk(KERN_NOTICE "hycapi_rx_capipkt\n");
539#endif
540	if (!cinfo) {
541		return;
542	}
543	ctrl = &cinfo->capi_ctrl;
544	if (len < CAPI_MSG_BASELEN) {
545		printk(KERN_ERR "HYSDN Card%d: invalid CAPI-message, length %d!\n",
546		       card->myid, len);
547		return;
548	}
549	MsgLen = CAPIMSG_LEN(buf);
550	ApplId = CAPIMSG_APPID(buf);
551	CapiCmd = CAPIMSG_CMD(buf);
552
553	if ((CapiCmd == CAPI_DATA_B3_IND) && (MsgLen < 30)) {
554		len2 = len + (30 - MsgLen);
555		if (!(skb = alloc_skb(len2, GFP_ATOMIC))) {
556			printk(KERN_ERR "HYSDN Card%d: incoming packet dropped\n",
557			       card->myid);
558			return;
559		}
560		memcpy(skb_put(skb, MsgLen), buf, MsgLen);
561		memcpy(skb_put(skb, 2 * sizeof(__u32)), CP64, 2 * sizeof(__u32));
562		memcpy(skb_put(skb, len - MsgLen), buf + MsgLen,
563		       len - MsgLen);
564		CAPIMSG_SETLEN(skb->data, 30);
565	} else {
566		if (!(skb = alloc_skb(len, GFP_ATOMIC))) {
567			printk(KERN_ERR "HYSDN Card%d: incoming packet dropped\n",
568			       card->myid);
569			return;
570		}
571		memcpy(skb_put(skb, len), buf, len);
572	}
573	switch (CAPIMSG_CMD(skb->data))
574	{
575	case CAPI_CONNECT_B3_CONF:
576/* Check info-field for error-indication: */
577		info = CAPIMSG_U16(skb->data, 12);
578		switch (info)
579		{
580		case 0:
581			capilib_new_ncci(&cinfo->ncci_head, ApplId, CAPIMSG_NCCI(skb->data),
582					 hycapi_applications[ApplId - 1].rp.datablkcnt);
583
584			break;
585		case 0x0001:
586			printk(KERN_ERR "HYSDN Card%d: NCPI not supported by current "
587			       "protocol. NCPI ignored.\n", card->myid);
588			break;
589		case 0x2001:
590			printk(KERN_ERR "HYSDN Card%d: Message not supported in"
591			       " current state\n", card->myid);
592			break;
593		case 0x2002:
594			printk(KERN_ERR "HYSDN Card%d: invalid PLCI\n", card->myid);
595			break;
596		case 0x2004:
597			printk(KERN_ERR "HYSDN Card%d: out of NCCI\n", card->myid);
598			break;
599		case 0x3008:
600			printk(KERN_ERR "HYSDN Card%d: NCPI not supported\n",
601			       card->myid);
602			break;
603		default:
604			printk(KERN_ERR "HYSDN Card%d: Info in CONNECT_B3_CONF: %d\n",
605			       card->myid, info);
606			break;
607		}
608		break;
609	case CAPI_CONNECT_B3_IND:
610		capilib_new_ncci(&cinfo->ncci_head, ApplId,
611				 CAPIMSG_NCCI(skb->data),
612				 hycapi_applications[ApplId - 1].rp.datablkcnt);
613		break;
614	case CAPI_DATA_B3_CONF:
615		capilib_data_b3_conf(&cinfo->ncci_head, ApplId,
616				     CAPIMSG_NCCI(skb->data),
617				     CAPIMSG_MSGID(skb->data));
618		break;
619	default:
620		break;
621	}
622	capi_ctr_handle_message(ctrl, ApplId, skb);
623}
624
625/******************************************************************
626hycapi_tx_capiack
627
628Internally acknowledge a msg sent. This will remove the msg from the
629internal queue.
630
631*******************************************************************/
632
633void hycapi_tx_capiack(hysdn_card *card)
634{
635	hycapictrl_info *cinfo = card->hyctrlinfo;
636#ifdef HYCAPI_PRINTFNAMES
637	printk(KERN_NOTICE "hycapi_tx_capiack\n");
638#endif
639	if (!cinfo) {
640		return;
641	}
642	spin_lock_irq(&cinfo->lock);
643	kfree_skb(cinfo->skbs[cinfo->out_idx]);		/* free skb */
644	cinfo->skbs[cinfo->out_idx++] = NULL;
645	if (cinfo->out_idx >= HYSDN_MAX_CAPI_SKB)
646		cinfo->out_idx = 0;	/* wrap around */
647
648	if (cinfo->sk_count-- == HYSDN_MAX_CAPI_SKB)	/* dec usage count */
649		capi_ctr_resume_output(&cinfo->capi_ctrl);
650	spin_unlock_irq(&cinfo->lock);
651}
652
653/***************************************************************
654hycapi_tx_capiget(hysdn_card *card)
655
656This is called when polling for messages to SEND.
657
658****************************************************************/
659
660struct sk_buff *
661hycapi_tx_capiget(hysdn_card *card)
662{
663	hycapictrl_info *cinfo = card->hyctrlinfo;
664	if (!cinfo) {
665		return (struct sk_buff *)NULL;
666	}
667	if (!cinfo->sk_count)
668		return (struct sk_buff *)NULL;	/* nothing available */
669
670	return (cinfo->skbs[cinfo->out_idx]);		/* next packet to send */
671}
672
673
674/**********************************************************
675int hycapi_init()
676
677attach the capi-driver to the kernel-capi.
678
679***********************************************************/
680
681int hycapi_init(void)
682{
683	int i;
684	for (i = 0; i < CAPI_MAXAPPL; i++) {
685		memset(&(hycapi_applications[i]), 0, sizeof(hycapi_appl));
686	}
687	return (0);
688}
689
690/**************************************************************
691hycapi_cleanup(void)
692
693detach the capi-driver to the kernel-capi. Actually this should
694free some more ressources. Do that later.
695**************************************************************/
696
697void
698hycapi_cleanup(void)
699{
700}
701
702/********************************************************************
703hycapi_capi_create(hysdn_card *card)
704
705Attach the card with its capi-ctrl.
706*********************************************************************/
707
708static void hycapi_fill_profile(hysdn_card *card)
709{
710	hycapictrl_info *cinfo = NULL;
711	struct capi_ctr *ctrl = NULL;
712	cinfo = card->hyctrlinfo;
713	if (!cinfo) return;
714	ctrl = &cinfo->capi_ctrl;
715	strcpy(ctrl->manu, "Hypercope");
716	ctrl->version.majorversion = 2;
717	ctrl->version.minorversion = 0;
718	ctrl->version.majormanuversion = 3;
719	ctrl->version.minormanuversion = 2;
720	ctrl->profile.ncontroller = card->myid;
721	ctrl->profile.nbchannel = card->bchans;
722	ctrl->profile.goptions = GLOBAL_OPTION_INTERNAL_CONTROLLER |
723		GLOBAL_OPTION_B_CHANNEL_OPERATION;
724	ctrl->profile.support1 =  B1_PROT_64KBIT_HDLC |
725		(card->faxchans ? B1_PROT_T30 : 0) |
726		B1_PROT_64KBIT_TRANSPARENT;
727	ctrl->profile.support2 = B2_PROT_ISO7776 |
728		(card->faxchans ? B2_PROT_T30 : 0) |
729		B2_PROT_TRANSPARENT;
730	ctrl->profile.support3 = B3_PROT_TRANSPARENT |
731		B3_PROT_T90NL |
732		(card->faxchans ? B3_PROT_T30 : 0) |
733		(card->faxchans ? B3_PROT_T30EXT : 0) |
734		B3_PROT_ISO8208;
735}
736
737int
738hycapi_capi_create(hysdn_card *card)
739{
740	hycapictrl_info *cinfo = NULL;
741	struct capi_ctr *ctrl = NULL;
742	int retval;
743#ifdef HYCAPI_PRINTFNAMES
744	printk(KERN_NOTICE "hycapi_capi_create\n");
745#endif
746	if ((hycapi_enable & (1 << card->myid)) == 0) {
747		return 1;
748	}
749	if (!card->hyctrlinfo) {
750		cinfo = kzalloc(sizeof(hycapictrl_info), GFP_ATOMIC);
751		if (!cinfo) {
752			printk(KERN_WARNING "HYSDN: no memory for capi-ctrl.\n");
753			return -ENOMEM;
754		}
755		card->hyctrlinfo = cinfo;
756		cinfo->card = card;
757		spin_lock_init(&cinfo->lock);
758		INIT_LIST_HEAD(&cinfo->ncci_head);
759
760		switch (card->brdtype) {
761		case BD_PCCARD:  strcpy(cinfo->cardname, "HYSDN Hycard"); break;
762		case BD_ERGO: strcpy(cinfo->cardname, "HYSDN Ergo2"); break;
763		case BD_METRO: strcpy(cinfo->cardname, "HYSDN Metro4"); break;
764		case BD_CHAMP2: strcpy(cinfo->cardname, "HYSDN Champ2"); break;
765		case BD_PLEXUS: strcpy(cinfo->cardname, "HYSDN Plexus30"); break;
766		default: strcpy(cinfo->cardname, "HYSDN ???"); break;
767		}
768
769		ctrl = &cinfo->capi_ctrl;
770		ctrl->driver_name   = "hycapi";
771		ctrl->driverdata    = cinfo;
772		ctrl->register_appl = hycapi_register_appl;
773		ctrl->release_appl  = hycapi_release_appl;
774		ctrl->send_message  = hycapi_send_message;
775		ctrl->load_firmware = hycapi_load_firmware;
776		ctrl->reset_ctr     = hycapi_reset_ctr;
777		ctrl->procinfo      = hycapi_procinfo;
778		ctrl->proc_fops = &hycapi_proc_fops;
779		strcpy(ctrl->name, cinfo->cardname);
780		ctrl->owner = THIS_MODULE;
781
782		retval = attach_capi_ctr(ctrl);
783		if (retval) {
784			printk(KERN_ERR "hycapi: attach controller failed.\n");
785			return -EBUSY;
786		}
787		/* fill in the blanks: */
788		hycapi_fill_profile(card);
789		capi_ctr_ready(ctrl);
790	} else {
791		/* resume output on stopped ctrl */
792		ctrl = &card->hyctrlinfo->capi_ctrl;
793		hycapi_fill_profile(card);
794		capi_ctr_ready(ctrl);
795		hycapi_restart_internal(ctrl);
796/*		ctrl->resume_output(ctrl); */
797	}
798	return 0;
799}
800