1/*
2 * sis5595.c - Part of lm_sensors, Linux kernel modules
3 *	       for hardware monitoring
4 *
5 * Copyright (C) 1998 - 2001 Frodo Looijaard <frodol@dds.nl>,
6 *			     Kyösti Mälkki <kmalkki@cc.hut.fi>, and
7 *			     Mark D. Studebaker <mdsxyz123@yahoo.com>
8 * Ported to Linux 2.6 by Aurelien Jarno <aurelien@aurel32.net> with
9 * the help of Jean Delvare <jdelvare@suse.de>
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or
14 * (at your option) any later version.
15 *
16 * This program is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
19 * GNU General Public License for more details.
20 *
21 * You should have received a copy of the GNU General Public License
22 * along with this program; if not, write to the Free Software
23 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
24 */
25
26/*
27 * SiS southbridge has a LM78-like chip integrated on the same IC.
28 * This driver is a customized copy of lm78.c
29 *
30 * Supports following revisions:
31 *	Version		PCI ID		PCI Revision
32 *	1		1039/0008	AF or less
33 *	2		1039/0008	B0 or greater
34 *
35 *  Note: these chips contain a 0008 device which is incompatible with the
36 *	 5595. We recognize these by the presence of the listed
37 *	 "blacklist" PCI ID and refuse to load.
38 *
39 * NOT SUPPORTED	PCI ID		BLACKLIST PCI ID
40 *	 540		0008		0540
41 *	 550		0008		0550
42 *	5513		0008		5511
43 *	5581		0008		5597
44 *	5582		0008		5597
45 *	5597		0008		5597
46 *	5598		0008		5597/5598
47 *	 630		0008		0630
48 *	 645		0008		0645
49 *	 730		0008		0730
50 *	 735		0008		0735
51 */
52
53#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
54
55#include <linux/module.h>
56#include <linux/slab.h>
57#include <linux/ioport.h>
58#include <linux/pci.h>
59#include <linux/platform_device.h>
60#include <linux/hwmon.h>
61#include <linux/hwmon-sysfs.h>
62#include <linux/err.h>
63#include <linux/init.h>
64#include <linux/jiffies.h>
65#include <linux/mutex.h>
66#include <linux/sysfs.h>
67#include <linux/acpi.h>
68#include <linux/io.h>
69
70
71/*
72 * If force_addr is set to anything different from 0, we forcibly enable
73 * the device at the given address.
74 */
75static u16 force_addr;
76module_param(force_addr, ushort, 0);
77MODULE_PARM_DESC(force_addr,
78		 "Initialize the base address of the sensors");
79
80static struct platform_device *pdev;
81
82/* Many SIS5595 constants specified below */
83
84/* Length of ISA address segment */
85#define SIS5595_EXTENT 8
86/* PCI Config Registers */
87#define SIS5595_BASE_REG 0x68
88#define SIS5595_PIN_REG 0x7A
89#define SIS5595_ENABLE_REG 0x7B
90
91/* Where are the ISA address/data registers relative to the base address */
92#define SIS5595_ADDR_REG_OFFSET 5
93#define SIS5595_DATA_REG_OFFSET 6
94
95/* The SIS5595 registers */
96#define SIS5595_REG_IN_MAX(nr) (0x2b + (nr) * 2)
97#define SIS5595_REG_IN_MIN(nr) (0x2c + (nr) * 2)
98#define SIS5595_REG_IN(nr) (0x20 + (nr))
99
100#define SIS5595_REG_FAN_MIN(nr) (0x3b + (nr))
101#define SIS5595_REG_FAN(nr) (0x28 + (nr))
102
103/*
104 * On the first version of the chip, the temp registers are separate.
105 * On the second version,
106 * TEMP pin is shared with IN4, configured in PCI register 0x7A.
107 * The registers are the same as well.
108 * OVER and HYST are really MAX and MIN.
109 */
110
111#define REV2MIN	0xb0
112#define SIS5595_REG_TEMP	(((data->revision) >= REV2MIN) ? \
113					SIS5595_REG_IN(4) : 0x27)
114#define SIS5595_REG_TEMP_OVER	(((data->revision) >= REV2MIN) ? \
115					SIS5595_REG_IN_MAX(4) : 0x39)
116#define SIS5595_REG_TEMP_HYST	(((data->revision) >= REV2MIN) ? \
117					SIS5595_REG_IN_MIN(4) : 0x3a)
118
119#define SIS5595_REG_CONFIG 0x40
120#define SIS5595_REG_ALARM1 0x41
121#define SIS5595_REG_ALARM2 0x42
122#define SIS5595_REG_FANDIV 0x47
123
124/*
125 * Conversions. Limit checking is only done on the TO_REG
126 * variants.
127 */
128
129/*
130 * IN: mV, (0V to 4.08V)
131 * REG: 16mV/bit
132 */
133static inline u8 IN_TO_REG(unsigned long val)
134{
135	unsigned long nval = clamp_val(val, 0, 4080);
136	return (nval + 8) / 16;
137}
138#define IN_FROM_REG(val) ((val) *  16)
139
140static inline u8 FAN_TO_REG(long rpm, int div)
141{
142	if (rpm <= 0)
143		return 255;
144	if (rpm > 1350000)
145		return 1;
146	return clamp_val((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
147}
148
149static inline int FAN_FROM_REG(u8 val, int div)
150{
151	return val == 0 ? -1 : val == 255 ? 0 : 1350000 / (val * div);
152}
153
154/*
155 * TEMP: mC (-54.12C to +157.53C)
156 * REG: 0.83C/bit + 52.12, two's complement
157 */
158static inline int TEMP_FROM_REG(s8 val)
159{
160	return val * 830 + 52120;
161}
162static inline s8 TEMP_TO_REG(long val)
163{
164	int nval = clamp_val(val, -54120, 157530) ;
165	return nval < 0 ? (nval - 5212 - 415) / 830 : (nval - 5212 + 415) / 830;
166}
167
168/*
169 * FAN DIV: 1, 2, 4, or 8 (defaults to 2)
170 * REG: 0, 1, 2, or 3 (respectively) (defaults to 1)
171 */
172static inline u8 DIV_TO_REG(int val)
173{
174	return val == 8 ? 3 : val == 4 ? 2 : val == 1 ? 0 : 1;
175}
176#define DIV_FROM_REG(val) (1 << (val))
177
178/*
179 * For each registered chip, we need to keep some data in memory.
180 * The structure is dynamically allocated.
181 */
182struct sis5595_data {
183	unsigned short addr;
184	const char *name;
185	struct device *hwmon_dev;
186	struct mutex lock;
187
188	struct mutex update_lock;
189	char valid;		/* !=0 if following fields are valid */
190	unsigned long last_updated;	/* In jiffies */
191	char maxins;		/* == 3 if temp enabled, otherwise == 4 */
192	u8 revision;		/* Reg. value */
193
194	u8 in[5];		/* Register value */
195	u8 in_max[5];		/* Register value */
196	u8 in_min[5];		/* Register value */
197	u8 fan[2];		/* Register value */
198	u8 fan_min[2];		/* Register value */
199	s8 temp;		/* Register value */
200	s8 temp_over;		/* Register value */
201	s8 temp_hyst;		/* Register value */
202	u8 fan_div[2];		/* Register encoding, shifted right */
203	u16 alarms;		/* Register encoding, combined */
204};
205
206static struct pci_dev *s_bridge;	/* pointer to the (only) sis5595 */
207
208static int sis5595_probe(struct platform_device *pdev);
209static int sis5595_remove(struct platform_device *pdev);
210
211static int sis5595_read_value(struct sis5595_data *data, u8 reg);
212static void sis5595_write_value(struct sis5595_data *data, u8 reg, u8 value);
213static struct sis5595_data *sis5595_update_device(struct device *dev);
214static void sis5595_init_device(struct sis5595_data *data);
215
216static struct platform_driver sis5595_driver = {
217	.driver = {
218		.name	= "sis5595",
219	},
220	.probe		= sis5595_probe,
221	.remove		= sis5595_remove,
222};
223
224/* 4 Voltages */
225static ssize_t show_in(struct device *dev, struct device_attribute *da,
226		       char *buf)
227{
228	struct sis5595_data *data = sis5595_update_device(dev);
229	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
230	int nr = attr->index;
231	return sprintf(buf, "%d\n", IN_FROM_REG(data->in[nr]));
232}
233
234static ssize_t show_in_min(struct device *dev, struct device_attribute *da,
235			   char *buf)
236{
237	struct sis5595_data *data = sis5595_update_device(dev);
238	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
239	int nr = attr->index;
240	return sprintf(buf, "%d\n", IN_FROM_REG(data->in_min[nr]));
241}
242
243static ssize_t show_in_max(struct device *dev, struct device_attribute *da,
244			   char *buf)
245{
246	struct sis5595_data *data = sis5595_update_device(dev);
247	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
248	int nr = attr->index;
249	return sprintf(buf, "%d\n", IN_FROM_REG(data->in_max[nr]));
250}
251
252static ssize_t set_in_min(struct device *dev, struct device_attribute *da,
253			  const char *buf, size_t count)
254{
255	struct sis5595_data *data = dev_get_drvdata(dev);
256	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
257	int nr = attr->index;
258	unsigned long val;
259	int err;
260
261	err = kstrtoul(buf, 10, &val);
262	if (err)
263		return err;
264
265	mutex_lock(&data->update_lock);
266	data->in_min[nr] = IN_TO_REG(val);
267	sis5595_write_value(data, SIS5595_REG_IN_MIN(nr), data->in_min[nr]);
268	mutex_unlock(&data->update_lock);
269	return count;
270}
271
272static ssize_t set_in_max(struct device *dev, struct device_attribute *da,
273			  const char *buf, size_t count)
274{
275	struct sis5595_data *data = dev_get_drvdata(dev);
276	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
277	int nr = attr->index;
278	unsigned long val;
279	int err;
280
281	err = kstrtoul(buf, 10, &val);
282	if (err)
283		return err;
284
285	mutex_lock(&data->update_lock);
286	data->in_max[nr] = IN_TO_REG(val);
287	sis5595_write_value(data, SIS5595_REG_IN_MAX(nr), data->in_max[nr]);
288	mutex_unlock(&data->update_lock);
289	return count;
290}
291
292#define show_in_offset(offset)					\
293static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO,		\
294		show_in, NULL, offset);				\
295static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR,	\
296		show_in_min, set_in_min, offset);		\
297static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR,	\
298		show_in_max, set_in_max, offset);
299
300show_in_offset(0);
301show_in_offset(1);
302show_in_offset(2);
303show_in_offset(3);
304show_in_offset(4);
305
306/* Temperature */
307static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
308			 char *buf)
309{
310	struct sis5595_data *data = sis5595_update_device(dev);
311	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp));
312}
313
314static ssize_t show_temp_over(struct device *dev, struct device_attribute *attr,
315			      char *buf)
316{
317	struct sis5595_data *data = sis5595_update_device(dev);
318	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_over));
319}
320
321static ssize_t set_temp_over(struct device *dev, struct device_attribute *attr,
322			     const char *buf, size_t count)
323{
324	struct sis5595_data *data = dev_get_drvdata(dev);
325	long val;
326	int err;
327
328	err = kstrtol(buf, 10, &val);
329	if (err)
330		return err;
331
332	mutex_lock(&data->update_lock);
333	data->temp_over = TEMP_TO_REG(val);
334	sis5595_write_value(data, SIS5595_REG_TEMP_OVER, data->temp_over);
335	mutex_unlock(&data->update_lock);
336	return count;
337}
338
339static ssize_t show_temp_hyst(struct device *dev, struct device_attribute *attr,
340			      char *buf)
341{
342	struct sis5595_data *data = sis5595_update_device(dev);
343	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_hyst));
344}
345
346static ssize_t set_temp_hyst(struct device *dev, struct device_attribute *attr,
347			     const char *buf, size_t count)
348{
349	struct sis5595_data *data = dev_get_drvdata(dev);
350	long val;
351	int err;
352
353	err = kstrtol(buf, 10, &val);
354	if (err)
355		return err;
356
357	mutex_lock(&data->update_lock);
358	data->temp_hyst = TEMP_TO_REG(val);
359	sis5595_write_value(data, SIS5595_REG_TEMP_HYST, data->temp_hyst);
360	mutex_unlock(&data->update_lock);
361	return count;
362}
363
364static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL);
365static DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR,
366		show_temp_over, set_temp_over);
367static DEVICE_ATTR(temp1_max_hyst, S_IRUGO | S_IWUSR,
368		show_temp_hyst, set_temp_hyst);
369
370/* 2 Fans */
371static ssize_t show_fan(struct device *dev, struct device_attribute *da,
372			char *buf)
373{
374	struct sis5595_data *data = sis5595_update_device(dev);
375	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
376	int nr = attr->index;
377	return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr],
378		DIV_FROM_REG(data->fan_div[nr])));
379}
380
381static ssize_t show_fan_min(struct device *dev, struct device_attribute *da,
382			    char *buf)
383{
384	struct sis5595_data *data = sis5595_update_device(dev);
385	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
386	int nr = attr->index;
387	return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr],
388		DIV_FROM_REG(data->fan_div[nr])));
389}
390
391static ssize_t set_fan_min(struct device *dev, struct device_attribute *da,
392			   const char *buf, size_t count)
393{
394	struct sis5595_data *data = dev_get_drvdata(dev);
395	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
396	int nr = attr->index;
397	unsigned long val;
398	int err;
399
400	err = kstrtoul(buf, 10, &val);
401	if (err)
402		return err;
403
404	mutex_lock(&data->update_lock);
405	data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
406	sis5595_write_value(data, SIS5595_REG_FAN_MIN(nr), data->fan_min[nr]);
407	mutex_unlock(&data->update_lock);
408	return count;
409}
410
411static ssize_t show_fan_div(struct device *dev, struct device_attribute *da,
412			    char *buf)
413{
414	struct sis5595_data *data = sis5595_update_device(dev);
415	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
416	int nr = attr->index;
417	return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]));
418}
419
420/*
421 * Note: we save and restore the fan minimum here, because its value is
422 * determined in part by the fan divisor.  This follows the principle of
423 * least surprise; the user doesn't expect the fan minimum to change just
424 * because the divisor changed.
425 */
426static ssize_t set_fan_div(struct device *dev, struct device_attribute *da,
427			   const char *buf, size_t count)
428{
429	struct sis5595_data *data = dev_get_drvdata(dev);
430	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
431	int nr = attr->index;
432	unsigned long min;
433	int reg;
434	unsigned long val;
435	int err;
436
437	err = kstrtoul(buf, 10, &val);
438	if (err)
439		return err;
440
441	mutex_lock(&data->update_lock);
442	min = FAN_FROM_REG(data->fan_min[nr],
443			DIV_FROM_REG(data->fan_div[nr]));
444	reg = sis5595_read_value(data, SIS5595_REG_FANDIV);
445
446	switch (val) {
447	case 1:
448		data->fan_div[nr] = 0;
449		break;
450	case 2:
451		data->fan_div[nr] = 1;
452		break;
453	case 4:
454		data->fan_div[nr] = 2;
455		break;
456	case 8:
457		data->fan_div[nr] = 3;
458		break;
459	default:
460		dev_err(dev,
461			"fan_div value %ld not supported. Choose one of 1, 2, 4 or 8!\n",
462			val);
463		mutex_unlock(&data->update_lock);
464		return -EINVAL;
465	}
466
467	switch (nr) {
468	case 0:
469		reg = (reg & 0xcf) | (data->fan_div[nr] << 4);
470		break;
471	case 1:
472		reg = (reg & 0x3f) | (data->fan_div[nr] << 6);
473		break;
474	}
475	sis5595_write_value(data, SIS5595_REG_FANDIV, reg);
476	data->fan_min[nr] =
477		FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
478	sis5595_write_value(data, SIS5595_REG_FAN_MIN(nr), data->fan_min[nr]);
479	mutex_unlock(&data->update_lock);
480	return count;
481}
482
483#define show_fan_offset(offset)						\
484static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO,			\
485		show_fan, NULL, offset - 1);				\
486static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR,		\
487		show_fan_min, set_fan_min, offset - 1);			\
488static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR,		\
489		show_fan_div, set_fan_div, offset - 1);
490
491show_fan_offset(1);
492show_fan_offset(2);
493
494/* Alarms */
495static ssize_t show_alarms(struct device *dev, struct device_attribute *attr,
496			   char *buf)
497{
498	struct sis5595_data *data = sis5595_update_device(dev);
499	return sprintf(buf, "%d\n", data->alarms);
500}
501static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
502
503static ssize_t show_alarm(struct device *dev, struct device_attribute *da,
504			  char *buf)
505{
506	struct sis5595_data *data = sis5595_update_device(dev);
507	int nr = to_sensor_dev_attr(da)->index;
508	return sprintf(buf, "%u\n", (data->alarms >> nr) & 1);
509}
510static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0);
511static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1);
512static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2);
513static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3);
514static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 15);
515static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 6);
516static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 7);
517static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 15);
518
519static ssize_t show_name(struct device *dev, struct device_attribute *attr,
520			 char *buf)
521{
522	struct sis5595_data *data = dev_get_drvdata(dev);
523	return sprintf(buf, "%s\n", data->name);
524}
525static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
526
527static struct attribute *sis5595_attributes[] = {
528	&sensor_dev_attr_in0_input.dev_attr.attr,
529	&sensor_dev_attr_in0_min.dev_attr.attr,
530	&sensor_dev_attr_in0_max.dev_attr.attr,
531	&sensor_dev_attr_in0_alarm.dev_attr.attr,
532	&sensor_dev_attr_in1_input.dev_attr.attr,
533	&sensor_dev_attr_in1_min.dev_attr.attr,
534	&sensor_dev_attr_in1_max.dev_attr.attr,
535	&sensor_dev_attr_in1_alarm.dev_attr.attr,
536	&sensor_dev_attr_in2_input.dev_attr.attr,
537	&sensor_dev_attr_in2_min.dev_attr.attr,
538	&sensor_dev_attr_in2_max.dev_attr.attr,
539	&sensor_dev_attr_in2_alarm.dev_attr.attr,
540	&sensor_dev_attr_in3_input.dev_attr.attr,
541	&sensor_dev_attr_in3_min.dev_attr.attr,
542	&sensor_dev_attr_in3_max.dev_attr.attr,
543	&sensor_dev_attr_in3_alarm.dev_attr.attr,
544
545	&sensor_dev_attr_fan1_input.dev_attr.attr,
546	&sensor_dev_attr_fan1_min.dev_attr.attr,
547	&sensor_dev_attr_fan1_div.dev_attr.attr,
548	&sensor_dev_attr_fan1_alarm.dev_attr.attr,
549	&sensor_dev_attr_fan2_input.dev_attr.attr,
550	&sensor_dev_attr_fan2_min.dev_attr.attr,
551	&sensor_dev_attr_fan2_div.dev_attr.attr,
552	&sensor_dev_attr_fan2_alarm.dev_attr.attr,
553
554	&dev_attr_alarms.attr,
555	&dev_attr_name.attr,
556	NULL
557};
558
559static const struct attribute_group sis5595_group = {
560	.attrs = sis5595_attributes,
561};
562
563static struct attribute *sis5595_attributes_in4[] = {
564	&sensor_dev_attr_in4_input.dev_attr.attr,
565	&sensor_dev_attr_in4_min.dev_attr.attr,
566	&sensor_dev_attr_in4_max.dev_attr.attr,
567	&sensor_dev_attr_in4_alarm.dev_attr.attr,
568	NULL
569};
570
571static const struct attribute_group sis5595_group_in4 = {
572	.attrs = sis5595_attributes_in4,
573};
574
575static struct attribute *sis5595_attributes_temp1[] = {
576	&dev_attr_temp1_input.attr,
577	&dev_attr_temp1_max.attr,
578	&dev_attr_temp1_max_hyst.attr,
579	&sensor_dev_attr_temp1_alarm.dev_attr.attr,
580	NULL
581};
582
583static const struct attribute_group sis5595_group_temp1 = {
584	.attrs = sis5595_attributes_temp1,
585};
586
587/* This is called when the module is loaded */
588static int sis5595_probe(struct platform_device *pdev)
589{
590	int err = 0;
591	int i;
592	struct sis5595_data *data;
593	struct resource *res;
594	char val;
595
596	/* Reserve the ISA region */
597	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
598	if (!devm_request_region(&pdev->dev, res->start, SIS5595_EXTENT,
599				 sis5595_driver.driver.name))
600		return -EBUSY;
601
602	data = devm_kzalloc(&pdev->dev, sizeof(struct sis5595_data),
603			    GFP_KERNEL);
604	if (!data)
605		return -ENOMEM;
606
607	mutex_init(&data->lock);
608	mutex_init(&data->update_lock);
609	data->addr = res->start;
610	data->name = "sis5595";
611	platform_set_drvdata(pdev, data);
612
613	/*
614	 * Check revision and pin registers to determine whether 4 or 5 voltages
615	 */
616	data->revision = s_bridge->revision;
617	/* 4 voltages, 1 temp */
618	data->maxins = 3;
619	if (data->revision >= REV2MIN) {
620		pci_read_config_byte(s_bridge, SIS5595_PIN_REG, &val);
621		if (!(val & 0x80))
622			/* 5 voltages, no temps */
623			data->maxins = 4;
624	}
625
626	/* Initialize the SIS5595 chip */
627	sis5595_init_device(data);
628
629	/* A few vars need to be filled upon startup */
630	for (i = 0; i < 2; i++) {
631		data->fan_min[i] = sis5595_read_value(data,
632					SIS5595_REG_FAN_MIN(i));
633	}
634
635	/* Register sysfs hooks */
636	err = sysfs_create_group(&pdev->dev.kobj, &sis5595_group);
637	if (err)
638		return err;
639	if (data->maxins == 4) {
640		err = sysfs_create_group(&pdev->dev.kobj, &sis5595_group_in4);
641		if (err)
642			goto exit_remove_files;
643	} else {
644		err = sysfs_create_group(&pdev->dev.kobj, &sis5595_group_temp1);
645		if (err)
646			goto exit_remove_files;
647	}
648
649	data->hwmon_dev = hwmon_device_register(&pdev->dev);
650	if (IS_ERR(data->hwmon_dev)) {
651		err = PTR_ERR(data->hwmon_dev);
652		goto exit_remove_files;
653	}
654
655	return 0;
656
657exit_remove_files:
658	sysfs_remove_group(&pdev->dev.kobj, &sis5595_group);
659	sysfs_remove_group(&pdev->dev.kobj, &sis5595_group_in4);
660	sysfs_remove_group(&pdev->dev.kobj, &sis5595_group_temp1);
661	return err;
662}
663
664static int sis5595_remove(struct platform_device *pdev)
665{
666	struct sis5595_data *data = platform_get_drvdata(pdev);
667
668	hwmon_device_unregister(data->hwmon_dev);
669	sysfs_remove_group(&pdev->dev.kobj, &sis5595_group);
670	sysfs_remove_group(&pdev->dev.kobj, &sis5595_group_in4);
671	sysfs_remove_group(&pdev->dev.kobj, &sis5595_group_temp1);
672
673	return 0;
674}
675
676
677/* ISA access must be locked explicitly. */
678static int sis5595_read_value(struct sis5595_data *data, u8 reg)
679{
680	int res;
681
682	mutex_lock(&data->lock);
683	outb_p(reg, data->addr + SIS5595_ADDR_REG_OFFSET);
684	res = inb_p(data->addr + SIS5595_DATA_REG_OFFSET);
685	mutex_unlock(&data->lock);
686	return res;
687}
688
689static void sis5595_write_value(struct sis5595_data *data, u8 reg, u8 value)
690{
691	mutex_lock(&data->lock);
692	outb_p(reg, data->addr + SIS5595_ADDR_REG_OFFSET);
693	outb_p(value, data->addr + SIS5595_DATA_REG_OFFSET);
694	mutex_unlock(&data->lock);
695}
696
697/* Called when we have found a new SIS5595. */
698static void sis5595_init_device(struct sis5595_data *data)
699{
700	u8 config = sis5595_read_value(data, SIS5595_REG_CONFIG);
701	if (!(config & 0x01))
702		sis5595_write_value(data, SIS5595_REG_CONFIG,
703				(config & 0xf7) | 0x01);
704}
705
706static struct sis5595_data *sis5595_update_device(struct device *dev)
707{
708	struct sis5595_data *data = dev_get_drvdata(dev);
709	int i;
710
711	mutex_lock(&data->update_lock);
712
713	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
714	    || !data->valid) {
715
716		for (i = 0; i <= data->maxins; i++) {
717			data->in[i] =
718			    sis5595_read_value(data, SIS5595_REG_IN(i));
719			data->in_min[i] =
720			    sis5595_read_value(data,
721					       SIS5595_REG_IN_MIN(i));
722			data->in_max[i] =
723			    sis5595_read_value(data,
724					       SIS5595_REG_IN_MAX(i));
725		}
726		for (i = 0; i < 2; i++) {
727			data->fan[i] =
728			    sis5595_read_value(data, SIS5595_REG_FAN(i));
729			data->fan_min[i] =
730			    sis5595_read_value(data,
731					       SIS5595_REG_FAN_MIN(i));
732		}
733		if (data->maxins == 3) {
734			data->temp =
735			    sis5595_read_value(data, SIS5595_REG_TEMP);
736			data->temp_over =
737			    sis5595_read_value(data, SIS5595_REG_TEMP_OVER);
738			data->temp_hyst =
739			    sis5595_read_value(data, SIS5595_REG_TEMP_HYST);
740		}
741		i = sis5595_read_value(data, SIS5595_REG_FANDIV);
742		data->fan_div[0] = (i >> 4) & 0x03;
743		data->fan_div[1] = i >> 6;
744		data->alarms =
745		    sis5595_read_value(data, SIS5595_REG_ALARM1) |
746		    (sis5595_read_value(data, SIS5595_REG_ALARM2) << 8);
747		data->last_updated = jiffies;
748		data->valid = 1;
749	}
750
751	mutex_unlock(&data->update_lock);
752
753	return data;
754}
755
756static const struct pci_device_id sis5595_pci_ids[] = {
757	{ PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503) },
758	{ 0, }
759};
760
761MODULE_DEVICE_TABLE(pci, sis5595_pci_ids);
762
763static int blacklist[] = {
764	PCI_DEVICE_ID_SI_540,
765	PCI_DEVICE_ID_SI_550,
766	PCI_DEVICE_ID_SI_630,
767	PCI_DEVICE_ID_SI_645,
768	PCI_DEVICE_ID_SI_730,
769	PCI_DEVICE_ID_SI_735,
770	PCI_DEVICE_ID_SI_5511, /*
771				* 5513 chip has the 0008 device but
772				* that ID shows up in other chips so we
773				* use the 5511 ID for recognition
774				*/
775	PCI_DEVICE_ID_SI_5597,
776	PCI_DEVICE_ID_SI_5598,
777	0 };
778
779static int sis5595_device_add(unsigned short address)
780{
781	struct resource res = {
782		.start	= address,
783		.end	= address + SIS5595_EXTENT - 1,
784		.name	= "sis5595",
785		.flags	= IORESOURCE_IO,
786	};
787	int err;
788
789	err = acpi_check_resource_conflict(&res);
790	if (err)
791		goto exit;
792
793	pdev = platform_device_alloc("sis5595", address);
794	if (!pdev) {
795		err = -ENOMEM;
796		pr_err("Device allocation failed\n");
797		goto exit;
798	}
799
800	err = platform_device_add_resources(pdev, &res, 1);
801	if (err) {
802		pr_err("Device resource addition failed (%d)\n", err);
803		goto exit_device_put;
804	}
805
806	err = platform_device_add(pdev);
807	if (err) {
808		pr_err("Device addition failed (%d)\n", err);
809		goto exit_device_put;
810	}
811
812	return 0;
813
814exit_device_put:
815	platform_device_put(pdev);
816exit:
817	return err;
818}
819
820static int sis5595_pci_probe(struct pci_dev *dev,
821				       const struct pci_device_id *id)
822{
823	u16 address;
824	u8 enable;
825	int *i;
826
827	for (i = blacklist; *i != 0; i++) {
828		struct pci_dev *d;
829		d = pci_get_device(PCI_VENDOR_ID_SI, *i, NULL);
830		if (d) {
831			dev_err(&d->dev,
832				"Looked for SIS5595 but found unsupported device %.4x\n",
833				*i);
834			pci_dev_put(d);
835			return -ENODEV;
836		}
837	}
838
839	force_addr &= ~(SIS5595_EXTENT - 1);
840	if (force_addr) {
841		dev_warn(&dev->dev, "Forcing ISA address 0x%x\n", force_addr);
842		pci_write_config_word(dev, SIS5595_BASE_REG, force_addr);
843	}
844
845	if (PCIBIOS_SUCCESSFUL !=
846	    pci_read_config_word(dev, SIS5595_BASE_REG, &address)) {
847		dev_err(&dev->dev, "Failed to read ISA address\n");
848		return -ENODEV;
849	}
850
851	address &= ~(SIS5595_EXTENT - 1);
852	if (!address) {
853		dev_err(&dev->dev,
854			"Base address not set - upgrade BIOS or use force_addr=0xaddr\n");
855		return -ENODEV;
856	}
857	if (force_addr && address != force_addr) {
858		/* doesn't work for some chips? */
859		dev_err(&dev->dev, "Failed to force ISA address\n");
860		return -ENODEV;
861	}
862
863	if (PCIBIOS_SUCCESSFUL !=
864	    pci_read_config_byte(dev, SIS5595_ENABLE_REG, &enable)) {
865		dev_err(&dev->dev, "Failed to read enable register\n");
866		return -ENODEV;
867	}
868	if (!(enable & 0x80)) {
869		if ((PCIBIOS_SUCCESSFUL !=
870		     pci_write_config_byte(dev, SIS5595_ENABLE_REG,
871					   enable | 0x80))
872		 || (PCIBIOS_SUCCESSFUL !=
873		     pci_read_config_byte(dev, SIS5595_ENABLE_REG, &enable))
874		 || (!(enable & 0x80))) {
875			/* doesn't work for some chips! */
876			dev_err(&dev->dev, "Failed to enable HWM device\n");
877			return -ENODEV;
878		}
879	}
880
881	if (platform_driver_register(&sis5595_driver)) {
882		dev_dbg(&dev->dev, "Failed to register sis5595 driver\n");
883		goto exit;
884	}
885
886	s_bridge = pci_dev_get(dev);
887	/* Sets global pdev as a side effect */
888	if (sis5595_device_add(address))
889		goto exit_unregister;
890
891	/*
892	 * Always return failure here.  This is to allow other drivers to bind
893	 * to this pci device.  We don't really want to have control over the
894	 * pci device, we only wanted to read as few register values from it.
895	 */
896	return -ENODEV;
897
898exit_unregister:
899	pci_dev_put(dev);
900	platform_driver_unregister(&sis5595_driver);
901exit:
902	return -ENODEV;
903}
904
905static struct pci_driver sis5595_pci_driver = {
906	.name            = "sis5595",
907	.id_table        = sis5595_pci_ids,
908	.probe           = sis5595_pci_probe,
909};
910
911static int __init sm_sis5595_init(void)
912{
913	return pci_register_driver(&sis5595_pci_driver);
914}
915
916static void __exit sm_sis5595_exit(void)
917{
918	pci_unregister_driver(&sis5595_pci_driver);
919	if (s_bridge != NULL) {
920		platform_device_unregister(pdev);
921		platform_driver_unregister(&sis5595_driver);
922		pci_dev_put(s_bridge);
923		s_bridge = NULL;
924	}
925}
926
927MODULE_AUTHOR("Aurelien Jarno <aurelien@aurel32.net>");
928MODULE_DESCRIPTION("SiS 5595 Sensor device");
929MODULE_LICENSE("GPL");
930
931module_init(sm_sis5595_init);
932module_exit(sm_sis5595_exit);
933