1/* 2 * adm1029.c - Part of lm_sensors, Linux kernel modules for hardware monitoring 3 * 4 * Copyright (C) 2006 Corentin LABBE <clabbe.montjoie@gmail.com> 5 * 6 * Based on LM83 Driver by Jean Delvare <jdelvare@suse.de> 7 * 8 * Give only processor, motherboard temperatures and fan tachs 9 * Very rare chip please let me know if you use it 10 * 11 * http://www.analog.com/UploadedFiles/Data_Sheets/ADM1029.pdf 12 * 13 * 14 * This program is free software; you can redistribute it and/or modify 15 * it under the terms of the GNU General Public License as published by 16 * the Free Software Foundation version 2 of the License 17 * 18 * This program is distributed in the hope that it will be useful, 19 * but WITHOUT ANY WARRANTY; without even the implied warranty of 20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 21 * GNU General Public License for more details. 22 * 23 * You should have received a copy of the GNU General Public License 24 * along with this program; if not, write to the Free Software 25 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 26 */ 27 28#include <linux/module.h> 29#include <linux/init.h> 30#include <linux/slab.h> 31#include <linux/jiffies.h> 32#include <linux/i2c.h> 33#include <linux/hwmon-sysfs.h> 34#include <linux/hwmon.h> 35#include <linux/err.h> 36#include <linux/mutex.h> 37 38/* 39 * Addresses to scan 40 */ 41 42static const unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 43 0x2e, 0x2f, I2C_CLIENT_END 44}; 45 46/* 47 * The ADM1029 registers 48 * Manufacturer ID is 0x41 for Analog Devices 49 */ 50 51#define ADM1029_REG_MAN_ID 0x0D 52#define ADM1029_REG_CHIP_ID 0x0E 53#define ADM1029_REG_CONFIG 0x01 54#define ADM1029_REG_NB_FAN_SUPPORT 0x02 55 56#define ADM1029_REG_TEMP_DEVICES_INSTALLED 0x06 57 58#define ADM1029_REG_LOCAL_TEMP 0xA0 59#define ADM1029_REG_REMOTE1_TEMP 0xA1 60#define ADM1029_REG_REMOTE2_TEMP 0xA2 61 62#define ADM1029_REG_LOCAL_TEMP_HIGH 0x90 63#define ADM1029_REG_REMOTE1_TEMP_HIGH 0x91 64#define ADM1029_REG_REMOTE2_TEMP_HIGH 0x92 65 66#define ADM1029_REG_LOCAL_TEMP_LOW 0x98 67#define ADM1029_REG_REMOTE1_TEMP_LOW 0x99 68#define ADM1029_REG_REMOTE2_TEMP_LOW 0x9A 69 70#define ADM1029_REG_FAN1 0x70 71#define ADM1029_REG_FAN2 0x71 72 73#define ADM1029_REG_FAN1_MIN 0x78 74#define ADM1029_REG_FAN2_MIN 0x79 75 76#define ADM1029_REG_FAN1_CONFIG 0x68 77#define ADM1029_REG_FAN2_CONFIG 0x69 78 79#define TEMP_FROM_REG(val) ((val) * 1000) 80 81#define DIV_FROM_REG(val) (1 << (((val) >> 6) - 1)) 82 83/* Registers to be checked by adm1029_update_device() */ 84static const u8 ADM1029_REG_TEMP[] = { 85 ADM1029_REG_LOCAL_TEMP, 86 ADM1029_REG_REMOTE1_TEMP, 87 ADM1029_REG_REMOTE2_TEMP, 88 ADM1029_REG_LOCAL_TEMP_HIGH, 89 ADM1029_REG_REMOTE1_TEMP_HIGH, 90 ADM1029_REG_REMOTE2_TEMP_HIGH, 91 ADM1029_REG_LOCAL_TEMP_LOW, 92 ADM1029_REG_REMOTE1_TEMP_LOW, 93 ADM1029_REG_REMOTE2_TEMP_LOW, 94}; 95 96static const u8 ADM1029_REG_FAN[] = { 97 ADM1029_REG_FAN1, 98 ADM1029_REG_FAN2, 99 ADM1029_REG_FAN1_MIN, 100 ADM1029_REG_FAN2_MIN, 101}; 102 103static const u8 ADM1029_REG_FAN_DIV[] = { 104 ADM1029_REG_FAN1_CONFIG, 105 ADM1029_REG_FAN2_CONFIG, 106}; 107 108/* 109 * Client data (each client gets its own) 110 */ 111 112struct adm1029_data { 113 struct i2c_client *client; 114 struct mutex update_lock; 115 char valid; /* zero until following fields are valid */ 116 unsigned long last_updated; /* in jiffies */ 117 118 /* registers values, signed for temperature, unsigned for other stuff */ 119 s8 temp[ARRAY_SIZE(ADM1029_REG_TEMP)]; 120 u8 fan[ARRAY_SIZE(ADM1029_REG_FAN)]; 121 u8 fan_div[ARRAY_SIZE(ADM1029_REG_FAN_DIV)]; 122}; 123 124/* 125 * function that update the status of the chips (temperature for example) 126 */ 127static struct adm1029_data *adm1029_update_device(struct device *dev) 128{ 129 struct adm1029_data *data = dev_get_drvdata(dev); 130 struct i2c_client *client = data->client; 131 132 mutex_lock(&data->update_lock); 133 /* 134 * Use the "cache" Luke, don't recheck values 135 * if there are already checked not a long time later 136 */ 137 if (time_after(jiffies, data->last_updated + HZ * 2) 138 || !data->valid) { 139 int nr; 140 141 dev_dbg(&client->dev, "Updating adm1029 data\n"); 142 143 for (nr = 0; nr < ARRAY_SIZE(ADM1029_REG_TEMP); nr++) { 144 data->temp[nr] = 145 i2c_smbus_read_byte_data(client, 146 ADM1029_REG_TEMP[nr]); 147 } 148 for (nr = 0; nr < ARRAY_SIZE(ADM1029_REG_FAN); nr++) { 149 data->fan[nr] = 150 i2c_smbus_read_byte_data(client, 151 ADM1029_REG_FAN[nr]); 152 } 153 for (nr = 0; nr < ARRAY_SIZE(ADM1029_REG_FAN_DIV); nr++) { 154 data->fan_div[nr] = 155 i2c_smbus_read_byte_data(client, 156 ADM1029_REG_FAN_DIV[nr]); 157 } 158 159 data->last_updated = jiffies; 160 data->valid = 1; 161 } 162 163 mutex_unlock(&data->update_lock); 164 165 return data; 166} 167 168/* 169 * Sysfs stuff 170 */ 171 172static ssize_t 173show_temp(struct device *dev, struct device_attribute *devattr, char *buf) 174{ 175 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); 176 struct adm1029_data *data = adm1029_update_device(dev); 177 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[attr->index])); 178} 179 180static ssize_t 181show_fan(struct device *dev, struct device_attribute *devattr, char *buf) 182{ 183 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); 184 struct adm1029_data *data = adm1029_update_device(dev); 185 u16 val; 186 if (data->fan[attr->index] == 0 187 || (data->fan_div[attr->index] & 0xC0) == 0 188 || data->fan[attr->index] == 255) { 189 return sprintf(buf, "0\n"); 190 } 191 192 val = 1880 * 120 / DIV_FROM_REG(data->fan_div[attr->index]) 193 / data->fan[attr->index]; 194 return sprintf(buf, "%d\n", val); 195} 196 197static ssize_t 198show_fan_div(struct device *dev, struct device_attribute *devattr, char *buf) 199{ 200 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); 201 struct adm1029_data *data = adm1029_update_device(dev); 202 if ((data->fan_div[attr->index] & 0xC0) == 0) 203 return sprintf(buf, "0\n"); 204 return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[attr->index])); 205} 206 207static ssize_t set_fan_div(struct device *dev, 208 struct device_attribute *devattr, const char *buf, size_t count) 209{ 210 struct adm1029_data *data = dev_get_drvdata(dev); 211 struct i2c_client *client = data->client; 212 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); 213 u8 reg; 214 long val; 215 int ret = kstrtol(buf, 10, &val); 216 if (ret < 0) 217 return ret; 218 219 mutex_lock(&data->update_lock); 220 221 /*Read actual config */ 222 reg = i2c_smbus_read_byte_data(client, 223 ADM1029_REG_FAN_DIV[attr->index]); 224 225 switch (val) { 226 case 1: 227 val = 1; 228 break; 229 case 2: 230 val = 2; 231 break; 232 case 4: 233 val = 3; 234 break; 235 default: 236 mutex_unlock(&data->update_lock); 237 dev_err(&client->dev, 238 "fan_div value %ld not supported. Choose one of 1, 2 or 4!\n", 239 val); 240 return -EINVAL; 241 } 242 /* Update the value */ 243 reg = (reg & 0x3F) | (val << 6); 244 245 /* Update the cache */ 246 data->fan_div[attr->index] = reg; 247 248 /* Write value */ 249 i2c_smbus_write_byte_data(client, 250 ADM1029_REG_FAN_DIV[attr->index], reg); 251 mutex_unlock(&data->update_lock); 252 253 return count; 254} 255 256/* 257 * Access rights on sysfs. S_IRUGO: Is Readable by User, Group and Others 258 * S_IWUSR: Is Writable by User. 259 */ 260static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0); 261static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1); 262static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2); 263 264static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, show_temp, NULL, 3); 265static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO, show_temp, NULL, 4); 266static SENSOR_DEVICE_ATTR(temp3_max, S_IRUGO, show_temp, NULL, 5); 267 268static SENSOR_DEVICE_ATTR(temp1_min, S_IRUGO, show_temp, NULL, 6); 269static SENSOR_DEVICE_ATTR(temp2_min, S_IRUGO, show_temp, NULL, 7); 270static SENSOR_DEVICE_ATTR(temp3_min, S_IRUGO, show_temp, NULL, 8); 271 272static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0); 273static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1); 274 275static SENSOR_DEVICE_ATTR(fan1_min, S_IRUGO, show_fan, NULL, 2); 276static SENSOR_DEVICE_ATTR(fan2_min, S_IRUGO, show_fan, NULL, 3); 277 278static SENSOR_DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR, 279 show_fan_div, set_fan_div, 0); 280static SENSOR_DEVICE_ATTR(fan2_div, S_IRUGO | S_IWUSR, 281 show_fan_div, set_fan_div, 1); 282 283static struct attribute *adm1029_attrs[] = { 284 &sensor_dev_attr_temp1_input.dev_attr.attr, 285 &sensor_dev_attr_temp1_min.dev_attr.attr, 286 &sensor_dev_attr_temp1_max.dev_attr.attr, 287 &sensor_dev_attr_temp2_input.dev_attr.attr, 288 &sensor_dev_attr_temp2_min.dev_attr.attr, 289 &sensor_dev_attr_temp2_max.dev_attr.attr, 290 &sensor_dev_attr_temp3_input.dev_attr.attr, 291 &sensor_dev_attr_temp3_min.dev_attr.attr, 292 &sensor_dev_attr_temp3_max.dev_attr.attr, 293 &sensor_dev_attr_fan1_input.dev_attr.attr, 294 &sensor_dev_attr_fan2_input.dev_attr.attr, 295 &sensor_dev_attr_fan1_min.dev_attr.attr, 296 &sensor_dev_attr_fan2_min.dev_attr.attr, 297 &sensor_dev_attr_fan1_div.dev_attr.attr, 298 &sensor_dev_attr_fan2_div.dev_attr.attr, 299 NULL 300}; 301 302ATTRIBUTE_GROUPS(adm1029); 303 304/* 305 * Real code 306 */ 307 308/* Return 0 if detection is successful, -ENODEV otherwise */ 309static int adm1029_detect(struct i2c_client *client, 310 struct i2c_board_info *info) 311{ 312 struct i2c_adapter *adapter = client->adapter; 313 u8 man_id, chip_id, temp_devices_installed, nb_fan_support; 314 315 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) 316 return -ENODEV; 317 318 /* 319 * ADM1029 doesn't have CHIP ID, check just MAN ID 320 * For better detection we check also ADM1029_TEMP_DEVICES_INSTALLED, 321 * ADM1029_REG_NB_FAN_SUPPORT and compare it with possible values 322 * documented 323 */ 324 325 man_id = i2c_smbus_read_byte_data(client, ADM1029_REG_MAN_ID); 326 chip_id = i2c_smbus_read_byte_data(client, ADM1029_REG_CHIP_ID); 327 temp_devices_installed = i2c_smbus_read_byte_data(client, 328 ADM1029_REG_TEMP_DEVICES_INSTALLED); 329 nb_fan_support = i2c_smbus_read_byte_data(client, 330 ADM1029_REG_NB_FAN_SUPPORT); 331 /* 0x41 is Analog Devices */ 332 if (man_id != 0x41 || (temp_devices_installed & 0xf9) != 0x01 333 || nb_fan_support != 0x03) 334 return -ENODEV; 335 336 if ((chip_id & 0xF0) != 0x00) { 337 /* 338 * There are no "official" CHIP ID, so actually 339 * we use Major/Minor revision for that 340 */ 341 pr_info("Unknown major revision %x, please let us know\n", 342 chip_id); 343 return -ENODEV; 344 } 345 346 strlcpy(info->type, "adm1029", I2C_NAME_SIZE); 347 348 return 0; 349} 350 351static int adm1029_init_client(struct i2c_client *client) 352{ 353 u8 config; 354 355 config = i2c_smbus_read_byte_data(client, ADM1029_REG_CONFIG); 356 if ((config & 0x10) == 0) { 357 i2c_smbus_write_byte_data(client, ADM1029_REG_CONFIG, 358 config | 0x10); 359 } 360 /* recheck config */ 361 config = i2c_smbus_read_byte_data(client, ADM1029_REG_CONFIG); 362 if ((config & 0x10) == 0) { 363 dev_err(&client->dev, "Initialization failed!\n"); 364 return 0; 365 } 366 return 1; 367} 368 369static int adm1029_probe(struct i2c_client *client, 370 const struct i2c_device_id *id) 371{ 372 struct device *dev = &client->dev; 373 struct adm1029_data *data; 374 struct device *hwmon_dev; 375 376 data = devm_kzalloc(dev, sizeof(struct adm1029_data), GFP_KERNEL); 377 if (!data) 378 return -ENOMEM; 379 380 data->client = client; 381 mutex_init(&data->update_lock); 382 383 /* 384 * Initialize the ADM1029 chip 385 * Check config register 386 */ 387 if (adm1029_init_client(client) == 0) 388 return -ENODEV; 389 390 hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, 391 data, 392 adm1029_groups); 393 return PTR_ERR_OR_ZERO(hwmon_dev); 394} 395 396static const struct i2c_device_id adm1029_id[] = { 397 { "adm1029", 0 }, 398 { } 399}; 400MODULE_DEVICE_TABLE(i2c, adm1029_id); 401 402static struct i2c_driver adm1029_driver = { 403 .class = I2C_CLASS_HWMON, 404 .driver = { 405 .name = "adm1029", 406 }, 407 .probe = adm1029_probe, 408 .id_table = adm1029_id, 409 .detect = adm1029_detect, 410 .address_list = normal_i2c, 411}; 412 413module_i2c_driver(adm1029_driver); 414 415MODULE_AUTHOR("Corentin LABBE <clabbe.montjoie@gmail.com>"); 416MODULE_DESCRIPTION("adm1029 driver"); 417MODULE_LICENSE("GPL v2"); 418