1/************************************************************************** 2 3Copyright © 2006 Dave Airlie 4 5All Rights Reserved. 6 7Permission is hereby granted, free of charge, to any person obtaining a 8copy of this software and associated documentation files (the 9"Software"), to deal in the Software without restriction, including 10without limitation the rights to use, copy, modify, merge, publish, 11distribute, sub license, and/or sell copies of the Software, and to 12permit persons to whom the Software is furnished to do so, subject to 13the following conditions: 14 15The above copyright notice and this permission notice (including the 16next paragraph) shall be included in all copies or substantial portions 17of the Software. 18 19THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS 20OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF 21MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. 22IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 23ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, 24TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE 25SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. 26 27**************************************************************************/ 28 29#include "dvo.h" 30 31#define SIL164_VID 0x0001 32#define SIL164_DID 0x0006 33 34#define SIL164_VID_LO 0x00 35#define SIL164_VID_HI 0x01 36#define SIL164_DID_LO 0x02 37#define SIL164_DID_HI 0x03 38#define SIL164_REV 0x04 39#define SIL164_RSVD 0x05 40#define SIL164_FREQ_LO 0x06 41#define SIL164_FREQ_HI 0x07 42 43#define SIL164_REG8 0x08 44#define SIL164_8_VEN (1<<5) 45#define SIL164_8_HEN (1<<4) 46#define SIL164_8_DSEL (1<<3) 47#define SIL164_8_BSEL (1<<2) 48#define SIL164_8_EDGE (1<<1) 49#define SIL164_8_PD (1<<0) 50 51#define SIL164_REG9 0x09 52#define SIL164_9_VLOW (1<<7) 53#define SIL164_9_MSEL_MASK (0x7<<4) 54#define SIL164_9_TSEL (1<<3) 55#define SIL164_9_RSEN (1<<2) 56#define SIL164_9_HTPLG (1<<1) 57#define SIL164_9_MDI (1<<0) 58 59#define SIL164_REGC 0x0c 60 61struct sil164_priv { 62 //I2CDevRec d; 63 bool quiet; 64}; 65 66#define SILPTR(d) ((SIL164Ptr)(d->DriverPrivate.ptr)) 67 68static bool sil164_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch) 69{ 70 struct sil164_priv *sil = dvo->dev_priv; 71 struct i2c_adapter *adapter = dvo->i2c_bus; 72 u8 out_buf[2]; 73 u8 in_buf[2]; 74 75 struct i2c_msg msgs[] = { 76 { 77 .addr = dvo->slave_addr, 78 .flags = 0, 79 .len = 1, 80 .buf = out_buf, 81 }, 82 { 83 .addr = dvo->slave_addr, 84 .flags = I2C_M_RD, 85 .len = 1, 86 .buf = in_buf, 87 } 88 }; 89 90 out_buf[0] = addr; 91 out_buf[1] = 0; 92 93 if (i2c_transfer(adapter, msgs, 2) == 2) { 94 *ch = in_buf[0]; 95 return true; 96 } 97 98 if (!sil->quiet) { 99 DRM_DEBUG_KMS("Unable to read register 0x%02x from %s:%02x.\n", 100 addr, adapter->name, dvo->slave_addr); 101 } 102 return false; 103} 104 105static bool sil164_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch) 106{ 107 struct sil164_priv *sil = dvo->dev_priv; 108 struct i2c_adapter *adapter = dvo->i2c_bus; 109 uint8_t out_buf[2]; 110 struct i2c_msg msg = { 111 .addr = dvo->slave_addr, 112 .flags = 0, 113 .len = 2, 114 .buf = out_buf, 115 }; 116 117 out_buf[0] = addr; 118 out_buf[1] = ch; 119 120 if (i2c_transfer(adapter, &msg, 1) == 1) 121 return true; 122 123 if (!sil->quiet) { 124 DRM_DEBUG_KMS("Unable to write register 0x%02x to %s:%d.\n", 125 addr, adapter->name, dvo->slave_addr); 126 } 127 128 return false; 129} 130 131/* Silicon Image 164 driver for chip on i2c bus */ 132static bool sil164_init(struct intel_dvo_device *dvo, 133 struct i2c_adapter *adapter) 134{ 135 /* this will detect the SIL164 chip on the specified i2c bus */ 136 struct sil164_priv *sil; 137 unsigned char ch; 138 139 sil = kzalloc(sizeof(struct sil164_priv), GFP_KERNEL); 140 if (sil == NULL) 141 return false; 142 143 dvo->i2c_bus = adapter; 144 dvo->dev_priv = sil; 145 sil->quiet = true; 146 147 if (!sil164_readb(dvo, SIL164_VID_LO, &ch)) 148 goto out; 149 150 if (ch != (SIL164_VID & 0xff)) { 151 DRM_DEBUG_KMS("sil164 not detected got %d: from %s Slave %d.\n", 152 ch, adapter->name, dvo->slave_addr); 153 goto out; 154 } 155 156 if (!sil164_readb(dvo, SIL164_DID_LO, &ch)) 157 goto out; 158 159 if (ch != (SIL164_DID & 0xff)) { 160 DRM_DEBUG_KMS("sil164 not detected got %d: from %s Slave %d.\n", 161 ch, adapter->name, dvo->slave_addr); 162 goto out; 163 } 164 sil->quiet = false; 165 166 DRM_DEBUG_KMS("init sil164 dvo controller successfully!\n"); 167 return true; 168 169out: 170 kfree(sil); 171 return false; 172} 173 174static enum drm_connector_status sil164_detect(struct intel_dvo_device *dvo) 175{ 176 uint8_t reg9; 177 178 sil164_readb(dvo, SIL164_REG9, ®9); 179 180 if (reg9 & SIL164_9_HTPLG) 181 return connector_status_connected; 182 else 183 return connector_status_disconnected; 184} 185 186static enum drm_mode_status sil164_mode_valid(struct intel_dvo_device *dvo, 187 struct drm_display_mode *mode) 188{ 189 return MODE_OK; 190} 191 192static void sil164_mode_set(struct intel_dvo_device *dvo, 193 struct drm_display_mode *mode, 194 struct drm_display_mode *adjusted_mode) 195{ 196 /* As long as the basics are set up, since we don't have clock 197 * dependencies in the mode setup, we can just leave the 198 * registers alone and everything will work fine. 199 */ 200 /* recommended programming sequence from doc */ 201 /*sil164_writeb(sil, 0x08, 0x30); 202 sil164_writeb(sil, 0x09, 0x00); 203 sil164_writeb(sil, 0x0a, 0x90); 204 sil164_writeb(sil, 0x0c, 0x89); 205 sil164_writeb(sil, 0x08, 0x31);*/ 206 /* don't do much */ 207 return; 208} 209 210/* set the SIL164 power state */ 211static void sil164_dpms(struct intel_dvo_device *dvo, bool enable) 212{ 213 int ret; 214 unsigned char ch; 215 216 ret = sil164_readb(dvo, SIL164_REG8, &ch); 217 if (ret == false) 218 return; 219 220 if (enable) 221 ch |= SIL164_8_PD; 222 else 223 ch &= ~SIL164_8_PD; 224 225 sil164_writeb(dvo, SIL164_REG8, ch); 226 return; 227} 228 229static bool sil164_get_hw_state(struct intel_dvo_device *dvo) 230{ 231 int ret; 232 unsigned char ch; 233 234 ret = sil164_readb(dvo, SIL164_REG8, &ch); 235 if (ret == false) 236 return false; 237 238 if (ch & SIL164_8_PD) 239 return true; 240 else 241 return false; 242} 243 244static void sil164_dump_regs(struct intel_dvo_device *dvo) 245{ 246 uint8_t val; 247 248 sil164_readb(dvo, SIL164_FREQ_LO, &val); 249 DRM_DEBUG_KMS("SIL164_FREQ_LO: 0x%02x\n", val); 250 sil164_readb(dvo, SIL164_FREQ_HI, &val); 251 DRM_DEBUG_KMS("SIL164_FREQ_HI: 0x%02x\n", val); 252 sil164_readb(dvo, SIL164_REG8, &val); 253 DRM_DEBUG_KMS("SIL164_REG8: 0x%02x\n", val); 254 sil164_readb(dvo, SIL164_REG9, &val); 255 DRM_DEBUG_KMS("SIL164_REG9: 0x%02x\n", val); 256 sil164_readb(dvo, SIL164_REGC, &val); 257 DRM_DEBUG_KMS("SIL164_REGC: 0x%02x\n", val); 258} 259 260static void sil164_destroy(struct intel_dvo_device *dvo) 261{ 262 struct sil164_priv *sil = dvo->dev_priv; 263 264 if (sil) { 265 kfree(sil); 266 dvo->dev_priv = NULL; 267 } 268} 269 270struct intel_dvo_dev_ops sil164_ops = { 271 .init = sil164_init, 272 .detect = sil164_detect, 273 .mode_valid = sil164_mode_valid, 274 .mode_set = sil164_mode_set, 275 .dpms = sil164_dpms, 276 .get_hw_state = sil164_get_hw_state, 277 .dump_regs = sil164_dump_regs, 278 .destroy = sil164_destroy, 279}; 280