1/*
2 *  RZ1000/1001 driver based upon
3 *
4 *  linux/drivers/ide/pci/rz1000.c	Version 0.06	January 12, 2003
5 *  Copyright (C) 1995-1998  Linus Torvalds & author (see below)
6 *  Principal Author:  mlord@pobox.com (Mark Lord)
7 *
8 *  See linux/MAINTAINERS for address of current maintainer.
9 *
10 *  This file provides support for disabling the buggy read-ahead
11 *  mode of the RZ1000 IDE chipset, commonly used on Intel motherboards.
12 */
13
14#include <linux/kernel.h>
15#include <linux/module.h>
16#include <linux/pci.h>
17#include <linux/blkdev.h>
18#include <linux/delay.h>
19#include <scsi/scsi_host.h>
20#include <linux/libata.h>
21
22#define DRV_NAME	"pata_rz1000"
23#define DRV_VERSION	"0.2.4"
24
25
26/**
27 *	rz1000_set_mode		-	mode setting function
28 *	@link: ATA link
29 *	@unused: returned device on set_mode failure
30 *
31 *	Use a non standard set_mode function. We don't want to be tuned. We
32 *	would prefer to be BIOS generic but for the fact our hardware is
33 *	whacked out.
34 */
35
36static int rz1000_set_mode(struct ata_link *link, struct ata_device **unused)
37{
38	struct ata_device *dev;
39
40	ata_for_each_dev(dev, link, ENABLED) {
41		/* We don't really care */
42		dev->pio_mode = XFER_PIO_0;
43		dev->xfer_mode = XFER_PIO_0;
44		dev->xfer_shift = ATA_SHIFT_PIO;
45		dev->flags |= ATA_DFLAG_PIO;
46		ata_dev_info(dev, "configured for PIO\n");
47	}
48	return 0;
49}
50
51
52static struct scsi_host_template rz1000_sht = {
53	ATA_PIO_SHT(DRV_NAME),
54};
55
56static struct ata_port_operations rz1000_port_ops = {
57	.inherits	= &ata_sff_port_ops,
58	.cable_detect	= ata_cable_40wire,
59	.set_mode	= rz1000_set_mode,
60};
61
62static int rz1000_fifo_disable(struct pci_dev *pdev)
63{
64	u16 reg;
65	/* Be exceptionally paranoid as we must be sure to apply the fix */
66	if (pci_read_config_word(pdev, 0x40, &reg) != 0)
67		return -1;
68	reg &= 0xDFFF;
69	if (pci_write_config_word(pdev, 0x40, reg) != 0)
70		return -1;
71	printk(KERN_INFO DRV_NAME ": disabled chipset readahead.\n");
72	return 0;
73}
74
75/**
76 *	rz1000_init_one - Register RZ1000 ATA PCI device with kernel services
77 *	@pdev: PCI device to register
78 *	@ent: Entry in rz1000_pci_tbl matching with @pdev
79 *
80 *	Configure an RZ1000 interface. This doesn't require much special
81 *	handling except that we *MUST* kill the chipset readahead or the
82 *	user may experience data corruption.
83 */
84
85static int rz1000_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
86{
87	static const struct ata_port_info info = {
88		.flags = ATA_FLAG_SLAVE_POSS,
89		.pio_mask = ATA_PIO4,
90		.port_ops = &rz1000_port_ops
91	};
92	const struct ata_port_info *ppi[] = { &info, NULL };
93
94	ata_print_version_once(&pdev->dev, DRV_VERSION);
95
96	if (rz1000_fifo_disable(pdev) == 0)
97		return ata_pci_sff_init_one(pdev, ppi, &rz1000_sht, NULL, 0);
98
99	printk(KERN_ERR DRV_NAME ": failed to disable read-ahead on chipset..\n");
100	/* Not safe to use so skip */
101	return -ENODEV;
102}
103
104#ifdef CONFIG_PM_SLEEP
105static int rz1000_reinit_one(struct pci_dev *pdev)
106{
107	struct ata_host *host = pci_get_drvdata(pdev);
108	int rc;
109
110	rc = ata_pci_device_do_resume(pdev);
111	if (rc)
112		return rc;
113
114	/* If this fails on resume (which is a "can't happen" case), we
115	   must stop as any progress risks data loss */
116	if (rz1000_fifo_disable(pdev))
117		panic("rz1000 fifo");
118
119	ata_host_resume(host);
120	return 0;
121}
122#endif
123
124static const struct pci_device_id pata_rz1000[] = {
125	{ PCI_VDEVICE(PCTECH, PCI_DEVICE_ID_PCTECH_RZ1000), },
126	{ PCI_VDEVICE(PCTECH, PCI_DEVICE_ID_PCTECH_RZ1001), },
127
128	{ },
129};
130
131static struct pci_driver rz1000_pci_driver = {
132	.name 		= DRV_NAME,
133	.id_table	= pata_rz1000,
134	.probe 		= rz1000_init_one,
135	.remove		= ata_pci_remove_one,
136#ifdef CONFIG_PM_SLEEP
137	.suspend	= ata_pci_device_suspend,
138	.resume		= rz1000_reinit_one,
139#endif
140};
141
142module_pci_driver(rz1000_pci_driver);
143
144MODULE_AUTHOR("Alan Cox");
145MODULE_DESCRIPTION("low-level driver for RZ1000 PCI ATA");
146MODULE_LICENSE("GPL");
147MODULE_DEVICE_TABLE(pci, pata_rz1000);
148MODULE_VERSION(DRV_VERSION);
149