1/* 2 * Copyright 2010 Tilera Corporation. All Rights Reserved. 3 * 4 * This program is free software; you can redistribute it and/or 5 * modify it under the terms of the GNU General Public License 6 * as published by the Free Software Foundation, version 2. 7 * 8 * This program is distributed in the hope that it will be useful, but 9 * WITHOUT ANY WARRANTY; without even the implied warranty of 10 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or 11 * NON INFRINGEMENT. See the GNU General Public License for 12 * more details. 13 * 14 * Linux interrupt vectors. 15 */ 16 17#include <linux/linkage.h> 18#include <linux/errno.h> 19#include <linux/init.h> 20#include <linux/unistd.h> 21#include <asm/ptrace.h> 22#include <asm/thread_info.h> 23#include <asm/irqflags.h> 24#include <asm/atomic_32.h> 25#include <asm/asm-offsets.h> 26#include <hv/hypervisor.h> 27#include <arch/abi.h> 28#include <arch/interrupts.h> 29#include <arch/spr_def.h> 30 31#define PTREGS_PTR(reg, ptreg) addli reg, sp, C_ABI_SAVE_AREA_SIZE + (ptreg) 32 33#define PTREGS_OFFSET_SYSCALL PTREGS_OFFSET_REG(TREG_SYSCALL_NR) 34 35 .macro push_reg reg, ptr=sp, delta=-4 36 { 37 sw \ptr, \reg 38 addli \ptr, \ptr, \delta 39 } 40 .endm 41 42 .macro pop_reg reg, ptr=sp, delta=4 43 { 44 lw \reg, \ptr 45 addli \ptr, \ptr, \delta 46 } 47 .endm 48 49 .macro pop_reg_zero reg, zreg, ptr=sp, delta=4 50 { 51 move \zreg, zero 52 lw \reg, \ptr 53 addi \ptr, \ptr, \delta 54 } 55 .endm 56 57 .macro push_extra_callee_saves reg 58 PTREGS_PTR(\reg, PTREGS_OFFSET_REG(51)) 59 push_reg r51, \reg 60 push_reg r50, \reg 61 push_reg r49, \reg 62 push_reg r48, \reg 63 push_reg r47, \reg 64 push_reg r46, \reg 65 push_reg r45, \reg 66 push_reg r44, \reg 67 push_reg r43, \reg 68 push_reg r42, \reg 69 push_reg r41, \reg 70 push_reg r40, \reg 71 push_reg r39, \reg 72 push_reg r38, \reg 73 push_reg r37, \reg 74 push_reg r36, \reg 75 push_reg r35, \reg 76 push_reg r34, \reg, PTREGS_OFFSET_BASE - PTREGS_OFFSET_REG(34) 77 .endm 78 79 .macro panic str 80 .pushsection .rodata, "a" 811: 82 .asciz "\str" 83 .popsection 84 { 85 moveli r0, lo16(1b) 86 } 87 { 88 auli r0, r0, ha16(1b) 89 jal panic 90 } 91 .endm 92 93#ifdef __COLLECT_LINKER_FEEDBACK__ 94 .pushsection .text.intvec_feedback,"ax" 95intvec_feedback: 96 .popsection 97#endif 98 99 /* 100 * Default interrupt handler. 101 * 102 * vecnum is where we'll put this code. 103 * c_routine is the C routine we'll call. 104 * 105 * The C routine is passed two arguments: 106 * - A pointer to the pt_regs state. 107 * - The interrupt vector number. 108 * 109 * The "processing" argument specifies the code for processing 110 * the interrupt. Defaults to "handle_interrupt". 111 */ 112 .macro int_hand vecnum, vecname, c_routine, processing=handle_interrupt 113 .org (\vecnum << 8) 114intvec_\vecname: 115 .ifc \vecnum, INT_SWINT_1 116 blz TREG_SYSCALL_NR_NAME, sys_cmpxchg 117 .endif 118 119 /* Temporarily save a register so we have somewhere to work. */ 120 121 mtspr SPR_SYSTEM_SAVE_K_1, r0 122 mfspr r0, SPR_EX_CONTEXT_K_1 123 124 /* The cmpxchg code clears sp to force us to reset it here on fault. */ 125 { 126 bz sp, 2f 127 andi r0, r0, SPR_EX_CONTEXT_1_1__PL_MASK /* mask off ICS */ 128 } 129 130 .ifc \vecnum, INT_DOUBLE_FAULT 131 /* 132 * For double-faults from user-space, fall through to the normal 133 * register save and stack setup path. Otherwise, it's the 134 * hypervisor giving us one last chance to dump diagnostics, and we 135 * branch to the kernel_double_fault routine to do so. 136 */ 137 bz r0, 1f 138 j _kernel_double_fault 1391: 140 .else 141 /* 142 * If we're coming from user-space, then set sp to the top of 143 * the kernel stack. Otherwise, assume sp is already valid. 144 */ 145 { 146 bnz r0, 0f 147 move r0, sp 148 } 149 .endif 150 151 .ifc \c_routine, do_page_fault 152 /* 153 * The page_fault handler may be downcalled directly by the 154 * hypervisor even when Linux is running and has ICS set. 155 * 156 * In this case the contents of EX_CONTEXT_K_1 reflect the 157 * previous fault and can't be relied on to choose whether or 158 * not to reinitialize the stack pointer. So we add a test 159 * to see whether SYSTEM_SAVE_K_2 has the high bit set, 160 * and if so we don't reinitialize sp, since we must be coming 161 * from Linux. (In fact the precise case is !(val & ~1), 162 * but any Linux PC has to have the high bit set.) 163 * 164 * Note that the hypervisor *always* sets SYSTEM_SAVE_K_2 for 165 * any path that turns into a downcall to one of our TLB handlers. 166 */ 167 mfspr r0, SPR_SYSTEM_SAVE_K_2 168 { 169 blz r0, 0f /* high bit in S_S_1_2 is for a PC to use */ 170 move r0, sp 171 } 172 .endif 173 1742: 175 /* 176 * SYSTEM_SAVE_K_0 holds the cpu number in the low bits, and 177 * the current stack top in the higher bits. So we recover 178 * our stack top by just masking off the low bits, then 179 * point sp at the top aligned address on the actual stack page. 180 */ 181 mfspr r0, SPR_SYSTEM_SAVE_K_0 182 mm r0, r0, zero, LOG2_NR_CPU_IDS, 31 183 1840: 185 /* 186 * Align the stack mod 64 so we can properly predict what 187 * cache lines we need to write-hint to reduce memory fetch 188 * latency as we enter the kernel. The layout of memory is 189 * as follows, with cache line 0 at the lowest VA, and cache 190 * line 4 just below the r0 value this "andi" computes. 191 * Note that we never write to cache line 4, and we skip 192 * cache line 1 for syscalls. 193 * 194 * cache line 4: ptregs padding (two words) 195 * cache line 3: r46...lr, pc, ex1, faultnum, orig_r0, flags, pad 196 * cache line 2: r30...r45 197 * cache line 1: r14...r29 198 * cache line 0: 2 x frame, r0..r13 199 */ 200#if STACK_TOP_DELTA != 64 201#error STACK_TOP_DELTA must be 64 for assumptions here and in task_pt_regs() 202#endif 203 andi r0, r0, -64 204 205 /* 206 * Push the first four registers on the stack, so that we can set 207 * them to vector-unique values before we jump to the common code. 208 * 209 * Registers are pushed on the stack as a struct pt_regs, 210 * with the sp initially just above the struct, and when we're 211 * done, sp points to the base of the struct, minus 212 * C_ABI_SAVE_AREA_SIZE, so we can directly jal to C code. 213 * 214 * This routine saves just the first four registers, plus the 215 * stack context so we can do proper backtracing right away, 216 * and defers to handle_interrupt to save the rest. 217 * The backtracer needs pc, ex1, lr, sp, r52, and faultnum. 218 */ 219 addli r0, r0, PTREGS_OFFSET_LR - (PTREGS_SIZE + KSTK_PTREGS_GAP) 220 wh64 r0 /* cache line 3 */ 221 { 222 sw r0, lr 223 addli r0, r0, PTREGS_OFFSET_SP - PTREGS_OFFSET_LR 224 } 225 { 226 sw r0, sp 227 addli sp, r0, PTREGS_OFFSET_REG(52) - PTREGS_OFFSET_SP 228 } 229 { 230 sw sp, r52 231 addli sp, sp, PTREGS_OFFSET_REG(1) - PTREGS_OFFSET_REG(52) 232 } 233 wh64 sp /* cache line 0 */ 234 { 235 sw sp, r1 236 addli sp, sp, PTREGS_OFFSET_REG(2) - PTREGS_OFFSET_REG(1) 237 } 238 { 239 sw sp, r2 240 addli sp, sp, PTREGS_OFFSET_REG(3) - PTREGS_OFFSET_REG(2) 241 } 242 { 243 sw sp, r3 244 addli sp, sp, PTREGS_OFFSET_PC - PTREGS_OFFSET_REG(3) 245 } 246 mfspr r0, SPR_EX_CONTEXT_K_0 247 .ifc \processing,handle_syscall 248 /* 249 * Bump the saved PC by one bundle so that when we return, we won't 250 * execute the same swint instruction again. We need to do this while 251 * we're in the critical section. 252 */ 253 addi r0, r0, 8 254 .endif 255 { 256 sw sp, r0 257 addli sp, sp, PTREGS_OFFSET_EX1 - PTREGS_OFFSET_PC 258 } 259 mfspr r0, SPR_EX_CONTEXT_K_1 260 { 261 sw sp, r0 262 addi sp, sp, PTREGS_OFFSET_FAULTNUM - PTREGS_OFFSET_EX1 263 /* 264 * Use r0 for syscalls so it's a temporary; use r1 for interrupts 265 * so that it gets passed through unchanged to the handler routine. 266 * Note that the .if conditional confusingly spans bundles. 267 */ 268 .ifc \processing,handle_syscall 269 movei r0, \vecnum 270 } 271 { 272 sw sp, r0 273 .else 274 movei r1, \vecnum 275 } 276 { 277 sw sp, r1 278 .endif 279 addli sp, sp, PTREGS_OFFSET_REG(0) - PTREGS_OFFSET_FAULTNUM 280 } 281 mfspr r0, SPR_SYSTEM_SAVE_K_1 /* Original r0 */ 282 { 283 sw sp, r0 284 addi sp, sp, -PTREGS_OFFSET_REG(0) - 4 285 } 286 { 287 sw sp, zero /* write zero into "Next SP" frame pointer */ 288 addi sp, sp, -4 /* leave SP pointing at bottom of frame */ 289 } 290 .ifc \processing,handle_syscall 291 j handle_syscall 292 .else 293 /* 294 * Capture per-interrupt SPR context to registers. 295 * We overload the meaning of r3 on this path such that if its bit 31 296 * is set, we have to mask all interrupts including NMIs before 297 * clearing the interrupt critical section bit. 298 * See discussion below at "finish_interrupt_save". 299 */ 300 .ifc \c_routine, do_page_fault 301 mfspr r2, SPR_SYSTEM_SAVE_K_3 /* address of page fault */ 302 mfspr r3, SPR_SYSTEM_SAVE_K_2 /* info about page fault */ 303 .else 304 .ifc \vecnum, INT_DOUBLE_FAULT 305 { 306 mfspr r2, SPR_SYSTEM_SAVE_K_2 /* double fault info from HV */ 307 movei r3, 0 308 } 309 .else 310 .ifc \c_routine, do_trap 311 { 312 mfspr r2, GPV_REASON 313 movei r3, 0 314 } 315 .else 316 .ifc \c_routine, handle_perf_interrupt 317 { 318 mfspr r2, PERF_COUNT_STS 319 movei r3, -1 /* not used, but set for consistency */ 320 } 321 .else 322 .ifc \c_routine, handle_perf_interrupt 323 { 324 mfspr r2, AUX_PERF_COUNT_STS 325 movei r3, -1 /* not used, but set for consistency */ 326 } 327 .else 328 movei r3, 0 329 .endif 330 .endif 331 .endif 332 .endif 333 .endif 334 /* Put function pointer in r0 */ 335 moveli r0, lo16(\c_routine) 336 { 337 auli r0, r0, ha16(\c_routine) 338 j \processing 339 } 340 .endif 341 ENDPROC(intvec_\vecname) 342 343#ifdef __COLLECT_LINKER_FEEDBACK__ 344 .pushsection .text.intvec_feedback,"ax" 345 .org (\vecnum << 5) 346 FEEDBACK_ENTER_EXPLICIT(intvec_\vecname, .intrpt, 1 << 8) 347 jrp lr 348 .popsection 349#endif 350 351 .endm 352 353 354 /* 355 * Save the rest of the registers that we didn't save in the actual 356 * vector itself. We can't use r0-r10 inclusive here. 357 */ 358 .macro finish_interrupt_save, function 359 360 /* If it's a syscall, save a proper orig_r0, otherwise just zero. */ 361 PTREGS_PTR(r52, PTREGS_OFFSET_ORIG_R0) 362 { 363 .ifc \function,handle_syscall 364 sw r52, r0 365 .else 366 sw r52, zero 367 .endif 368 PTREGS_PTR(r52, PTREGS_OFFSET_TP) 369 } 370 371 /* 372 * For ordinary syscalls, we save neither caller- nor callee- 373 * save registers, since the syscall invoker doesn't expect the 374 * caller-saves to be saved, and the called kernel functions will 375 * take care of saving the callee-saves for us. 376 * 377 * For interrupts we save just the caller-save registers. Saving 378 * them is required (since the "caller" can't save them). Again, 379 * the called kernel functions will restore the callee-save 380 * registers for us appropriately. 381 * 382 * On return, we normally restore nothing special for syscalls, 383 * and just the caller-save registers for interrupts. 384 * 385 * However, there are some important caveats to all this: 386 * 387 * - We always save a few callee-save registers to give us 388 * some scratchpad registers to carry across function calls. 389 * 390 * - fork/vfork/etc require us to save all the callee-save 391 * registers, which we do in PTREGS_SYSCALL_ALL_REGS, below. 392 * 393 * - We always save r0..r5 and r10 for syscalls, since we need 394 * to reload them a bit later for the actual kernel call, and 395 * since we might need them for -ERESTARTNOINTR, etc. 396 * 397 * - Before invoking a signal handler, we save the unsaved 398 * callee-save registers so they are visible to the 399 * signal handler or any ptracer. 400 * 401 * - If the unsaved callee-save registers are modified, we set 402 * a bit in pt_regs so we know to reload them from pt_regs 403 * and not just rely on the kernel function unwinding. 404 * (Done for ptrace register writes and SA_SIGINFO handler.) 405 */ 406 { 407 sw r52, tp 408 PTREGS_PTR(r52, PTREGS_OFFSET_REG(33)) 409 } 410 wh64 r52 /* cache line 2 */ 411 push_reg r33, r52 412 push_reg r32, r52 413 push_reg r31, r52 414 .ifc \function,handle_syscall 415 push_reg r30, r52, PTREGS_OFFSET_SYSCALL - PTREGS_OFFSET_REG(30) 416 push_reg TREG_SYSCALL_NR_NAME, r52, \ 417 PTREGS_OFFSET_REG(5) - PTREGS_OFFSET_SYSCALL 418 .else 419 420 push_reg r30, r52, PTREGS_OFFSET_REG(29) - PTREGS_OFFSET_REG(30) 421 wh64 r52 /* cache line 1 */ 422 push_reg r29, r52 423 push_reg r28, r52 424 push_reg r27, r52 425 push_reg r26, r52 426 push_reg r25, r52 427 push_reg r24, r52 428 push_reg r23, r52 429 push_reg r22, r52 430 push_reg r21, r52 431 push_reg r20, r52 432 push_reg r19, r52 433 push_reg r18, r52 434 push_reg r17, r52 435 push_reg r16, r52 436 push_reg r15, r52 437 push_reg r14, r52 438 push_reg r13, r52 439 push_reg r12, r52 440 push_reg r11, r52 441 push_reg r10, r52 442 push_reg r9, r52 443 push_reg r8, r52 444 push_reg r7, r52 445 push_reg r6, r52 446 447 .endif 448 449 push_reg r5, r52 450 sw r52, r4 451 452 /* Load tp with our per-cpu offset. */ 453#ifdef CONFIG_SMP 454 { 455 mfspr r20, SPR_SYSTEM_SAVE_K_0 456 moveli r21, lo16(__per_cpu_offset) 457 } 458 { 459 auli r21, r21, ha16(__per_cpu_offset) 460 mm r20, r20, zero, 0, LOG2_NR_CPU_IDS-1 461 } 462 s2a r20, r20, r21 463 lw tp, r20 464#else 465 move tp, zero 466#endif 467 468 /* 469 * If we will be returning to the kernel, we will need to 470 * reset the interrupt masks to the state they had before. 471 * Set DISABLE_IRQ in flags iff we came from PL1 with irqs disabled. 472 * We load flags in r32 here so we can jump to .Lrestore_regs 473 * directly after do_page_fault_ics() if necessary. 474 */ 475 mfspr r32, SPR_EX_CONTEXT_K_1 476 { 477 andi r32, r32, SPR_EX_CONTEXT_1_1__PL_MASK /* mask off ICS */ 478 PTREGS_PTR(r21, PTREGS_OFFSET_FLAGS) 479 } 480 bzt r32, 1f /* zero if from user space */ 481 IRQS_DISABLED(r32) /* zero if irqs enabled */ 482#if PT_FLAGS_DISABLE_IRQ != 1 483# error Value of IRQS_DISABLED used to set PT_FLAGS_DISABLE_IRQ; fix 484#endif 4851: 486 .ifnc \function,handle_syscall 487 /* Record the fact that we saved the caller-save registers above. */ 488 ori r32, r32, PT_FLAGS_CALLER_SAVES 489 .endif 490 sw r21, r32 491 492#ifdef __COLLECT_LINKER_FEEDBACK__ 493 /* 494 * Notify the feedback routines that we were in the 495 * appropriate fixed interrupt vector area. Note that we 496 * still have ICS set at this point, so we can't invoke any 497 * atomic operations or we will panic. The feedback 498 * routines internally preserve r0..r10 and r30 up. 499 */ 500 .ifnc \function,handle_syscall 501 shli r20, r1, 5 502 .else 503 moveli r20, INT_SWINT_1 << 5 504 .endif 505 addli r20, r20, lo16(intvec_feedback) 506 auli r20, r20, ha16(intvec_feedback) 507 jalr r20 508 509 /* And now notify the feedback routines that we are here. */ 510 FEEDBACK_ENTER(\function) 511#endif 512 513 /* 514 * we've captured enough state to the stack (including in 515 * particular our EX_CONTEXT state) that we can now release 516 * the interrupt critical section and replace it with our 517 * standard "interrupts disabled" mask value. This allows 518 * synchronous interrupts (and profile interrupts) to punch 519 * through from this point onwards. 520 * 521 * If bit 31 of r3 is set during a non-NMI interrupt, we know we 522 * are on the path where the hypervisor has punched through our 523 * ICS with a page fault, so we call out to do_page_fault_ics() 524 * to figure out what to do with it. If the fault was in 525 * an atomic op, we unlock the atomic lock, adjust the 526 * saved register state a little, and return "zero" in r4, 527 * falling through into the normal page-fault interrupt code. 528 * If the fault was in a kernel-space atomic operation, then 529 * do_page_fault_ics() resolves it itself, returns "one" in r4, 530 * and as a result goes directly to restoring registers and iret, 531 * without trying to adjust the interrupt masks at all. 532 * The do_page_fault_ics() API involves passing and returning 533 * a five-word struct (in registers) to avoid writing the 534 * save and restore code here. 535 */ 536 .ifc \function,handle_nmi 537 IRQ_DISABLE_ALL(r20) 538 .else 539 .ifnc \function,handle_syscall 540 bgezt r3, 1f 541 { 542 PTREGS_PTR(r0, PTREGS_OFFSET_BASE) 543 jal do_page_fault_ics 544 } 545 FEEDBACK_REENTER(\function) 546 bzt r4, 1f 547 j .Lrestore_regs 5481: 549 .endif 550 IRQ_DISABLE(r20, r21) 551 .endif 552 mtspr INTERRUPT_CRITICAL_SECTION, zero 553 554 /* 555 * Prepare the first 256 stack bytes to be rapidly accessible 556 * without having to fetch the background data. We don't really 557 * know how far to write-hint, but kernel stacks generally 558 * aren't that big, and write-hinting here does take some time. 559 */ 560 addi r52, sp, -64 561 { 562 wh64 r52 563 addi r52, r52, -64 564 } 565 { 566 wh64 r52 567 addi r52, r52, -64 568 } 569 { 570 wh64 r52 571 addi r52, r52, -64 572 } 573 wh64 r52 574 575#ifdef CONFIG_TRACE_IRQFLAGS 576 .ifnc \function,handle_nmi 577 /* 578 * We finally have enough state set up to notify the irq 579 * tracing code that irqs were disabled on entry to the handler. 580 * The TRACE_IRQS_OFF call clobbers registers r0-r29. 581 * For syscalls, we already have the register state saved away 582 * on the stack, so we don't bother to do any register saves here, 583 * and later we pop the registers back off the kernel stack. 584 * For interrupt handlers, save r0-r3 in callee-saved registers. 585 */ 586 .ifnc \function,handle_syscall 587 { move r30, r0; move r31, r1 } 588 { move r32, r2; move r33, r3 } 589 .endif 590 TRACE_IRQS_OFF 591 .ifnc \function,handle_syscall 592 { move r0, r30; move r1, r31 } 593 { move r2, r32; move r3, r33 } 594 .endif 595 .endif 596#endif 597 598 .endm 599 600 .macro check_single_stepping, kind, not_single_stepping 601 /* 602 * Check for single stepping in user-level priv 603 * kind can be "normal", "ill", or "syscall" 604 * At end, if fall-thru 605 * r29: thread_info->step_state 606 * r28: &pt_regs->pc 607 * r27: pt_regs->pc 608 * r26: thread_info->step_state->buffer 609 */ 610 611 /* Check for single stepping */ 612 GET_THREAD_INFO(r29) 613 { 614 /* Get pointer to field holding step state */ 615 addi r29, r29, THREAD_INFO_STEP_STATE_OFFSET 616 617 /* Get pointer to EX1 in register state */ 618 PTREGS_PTR(r27, PTREGS_OFFSET_EX1) 619 } 620 { 621 /* Get pointer to field holding PC */ 622 PTREGS_PTR(r28, PTREGS_OFFSET_PC) 623 624 /* Load the pointer to the step state */ 625 lw r29, r29 626 } 627 /* Load EX1 */ 628 lw r27, r27 629 { 630 /* Points to flags */ 631 addi r23, r29, SINGLESTEP_STATE_FLAGS_OFFSET 632 633 /* No single stepping if there is no step state structure */ 634 bzt r29, \not_single_stepping 635 } 636 { 637 /* mask off ICS and any other high bits */ 638 andi r27, r27, SPR_EX_CONTEXT_1_1__PL_MASK 639 640 /* Load pointer to single step instruction buffer */ 641 lw r26, r29 642 } 643 /* Check priv state */ 644 bnz r27, \not_single_stepping 645 646 /* Get flags */ 647 lw r22, r23 648 { 649 /* Branch if single-step mode not enabled */ 650 bbnst r22, \not_single_stepping 651 652 /* Clear enabled flag */ 653 andi r22, r22, ~SINGLESTEP_STATE_MASK_IS_ENABLED 654 } 655 .ifc \kind,normal 656 { 657 /* Load PC */ 658 lw r27, r28 659 660 /* Point to the entry containing the original PC */ 661 addi r24, r29, SINGLESTEP_STATE_ORIG_PC_OFFSET 662 } 663 { 664 /* Disable single stepping flag */ 665 sw r23, r22 666 } 667 { 668 /* Get the original pc */ 669 lw r24, r24 670 671 /* See if the PC is at the start of the single step buffer */ 672 seq r25, r26, r27 673 } 674 /* 675 * NOTE: it is really expected that the PC be in the single step buffer 676 * at this point 677 */ 678 bzt r25, \not_single_stepping 679 680 /* Restore the original PC */ 681 sw r28, r24 682 .else 683 .ifc \kind,syscall 684 { 685 /* Load PC */ 686 lw r27, r28 687 688 /* Point to the entry containing the next PC */ 689 addi r24, r29, SINGLESTEP_STATE_NEXT_PC_OFFSET 690 } 691 { 692 /* Increment the stopped PC by the bundle size */ 693 addi r26, r26, 8 694 695 /* Disable single stepping flag */ 696 sw r23, r22 697 } 698 { 699 /* Get the next pc */ 700 lw r24, r24 701 702 /* 703 * See if the PC is one bundle past the start of the 704 * single step buffer 705 */ 706 seq r25, r26, r27 707 } 708 { 709 /* 710 * NOTE: it is really expected that the PC be in the 711 * single step buffer at this point 712 */ 713 bzt r25, \not_single_stepping 714 } 715 /* Set to the next PC */ 716 sw r28, r24 717 .else 718 { 719 /* Point to 3rd bundle in buffer */ 720 addi r25, r26, 16 721 722 /* Load PC */ 723 lw r27, r28 724 } 725 { 726 /* Disable single stepping flag */ 727 sw r23, r22 728 729 /* See if the PC is in the single step buffer */ 730 slte_u r24, r26, r27 731 } 732 { 733 slte_u r25, r27, r25 734 735 /* 736 * NOTE: it is really expected that the PC be in the 737 * single step buffer at this point 738 */ 739 bzt r24, \not_single_stepping 740 } 741 bzt r25, \not_single_stepping 742 .endif 743 .endif 744 .endm 745 746 /* 747 * Redispatch a downcall. 748 */ 749 .macro dc_dispatch vecnum, vecname 750 .org (\vecnum << 8) 751intvec_\vecname: 752 j _hv_downcall_dispatch 753 ENDPROC(intvec_\vecname) 754 .endm 755 756 /* 757 * Common code for most interrupts. The C function we're eventually 758 * going to is in r0, and the faultnum is in r1; the original 759 * values for those registers are on the stack. 760 */ 761 .pushsection .text.handle_interrupt,"ax" 762handle_interrupt: 763 finish_interrupt_save handle_interrupt 764 765 /* 766 * Check for if we are single stepping in user level. If so, then 767 * we need to restore the PC. 768 */ 769 770 check_single_stepping normal, .Ldispatch_interrupt 771.Ldispatch_interrupt: 772 773 /* Jump to the C routine; it should enable irqs as soon as possible. */ 774 { 775 jalr r0 776 PTREGS_PTR(r0, PTREGS_OFFSET_BASE) 777 } 778 FEEDBACK_REENTER(handle_interrupt) 779 { 780 movei r30, 0 /* not an NMI */ 781 j interrupt_return 782 } 783 STD_ENDPROC(handle_interrupt) 784 785/* 786 * This routine takes a boolean in r30 indicating if this is an NMI. 787 * If so, we also expect a boolean in r31 indicating whether to 788 * re-enable the oprofile interrupts. 789 * 790 * Note that .Lresume_userspace is jumped to directly in several 791 * places, and we need to make sure r30 is set correctly in those 792 * callers as well. 793 */ 794STD_ENTRY(interrupt_return) 795 /* If we're resuming to kernel space, don't check thread flags. */ 796 { 797 bnz r30, .Lrestore_all /* NMIs don't special-case user-space */ 798 PTREGS_PTR(r29, PTREGS_OFFSET_EX1) 799 } 800 lw r29, r29 801 andi r29, r29, SPR_EX_CONTEXT_1_1__PL_MASK /* mask off ICS */ 802 bzt r29, .Lresume_userspace 803 804#ifdef CONFIG_PREEMPT 805 /* Returning to kernel space. Check if we need preemption. */ 806 GET_THREAD_INFO(r29) 807 addli r28, r29, THREAD_INFO_FLAGS_OFFSET 808 { 809 lw r28, r28 810 addli r29, r29, THREAD_INFO_PREEMPT_COUNT_OFFSET 811 } 812 { 813 andi r28, r28, _TIF_NEED_RESCHED 814 lw r29, r29 815 } 816 bzt r28, 1f 817 bnz r29, 1f 818 /* Disable interrupts explicitly for preemption. */ 819 IRQ_DISABLE(r20,r21) 820 TRACE_IRQS_OFF 821 jal preempt_schedule_irq 822 FEEDBACK_REENTER(interrupt_return) 8231: 824#endif 825 826 /* If we're resuming to _cpu_idle_nap, bump PC forward by 8. */ 827 { 828 PTREGS_PTR(r29, PTREGS_OFFSET_PC) 829 moveli r27, lo16(_cpu_idle_nap) 830 } 831 { 832 lw r28, r29 833 auli r27, r27, ha16(_cpu_idle_nap) 834 } 835 { 836 seq r27, r27, r28 837 } 838 { 839 bbns r27, .Lrestore_all 840 addi r28, r28, 8 841 } 842 sw r29, r28 843 j .Lrestore_all 844 845.Lresume_userspace: 846 FEEDBACK_REENTER(interrupt_return) 847 848 /* 849 * Use r33 to hold whether we have already loaded the callee-saves 850 * into ptregs. We don't want to do it twice in this loop, since 851 * then we'd clobber whatever changes are made by ptrace, etc. 852 * Get base of stack in r32. 853 */ 854 { 855 GET_THREAD_INFO(r32) 856 movei r33, 0 857 } 858 859.Lretry_work_pending: 860 /* 861 * Disable interrupts so as to make sure we don't 862 * miss an interrupt that sets any of the thread flags (like 863 * need_resched or sigpending) between sampling and the iret. 864 * Routines like schedule() or do_signal() may re-enable 865 * interrupts before returning. 866 */ 867 IRQ_DISABLE(r20, r21) 868 TRACE_IRQS_OFF /* Note: clobbers registers r0-r29 */ 869 870 871 /* Check to see if there is any work to do before returning to user. */ 872 { 873 addi r29, r32, THREAD_INFO_FLAGS_OFFSET 874 moveli r1, lo16(_TIF_ALLWORK_MASK) 875 } 876 { 877 lw r29, r29 878 auli r1, r1, ha16(_TIF_ALLWORK_MASK) 879 } 880 and r1, r29, r1 881 bzt r1, .Lrestore_all 882 883 /* 884 * Make sure we have all the registers saved for signal 885 * handling, notify-resume, or single-step. Call out to C 886 * code to figure out exactly what we need to do for each flag bit, 887 * then if necessary, reload the flags and recheck. 888 */ 889 { 890 PTREGS_PTR(r0, PTREGS_OFFSET_BASE) 891 bnz r33, 1f 892 } 893 push_extra_callee_saves r0 894 movei r33, 1 8951: jal do_work_pending 896 bnz r0, .Lretry_work_pending 897 898 /* 899 * In the NMI case we 900 * omit the call to single_process_check_nohz, which normally checks 901 * to see if we should start or stop the scheduler tick, because 902 * we can't call arbitrary Linux code from an NMI context. 903 * We always call the homecache TLB deferral code to re-trigger 904 * the deferral mechanism. 905 * 906 * The other chunk of responsibility this code has is to reset the 907 * interrupt masks appropriately to reset irqs and NMIs. We have 908 * to call TRACE_IRQS_OFF and TRACE_IRQS_ON to support all the 909 * lockdep-type stuff, but we can't set ICS until afterwards, since 910 * ICS can only be used in very tight chunks of code to avoid 911 * tripping over various assertions that it is off. 912 * 913 * (There is what looks like a window of vulnerability here since 914 * we might take a profile interrupt between the two SPR writes 915 * that set the mask, but since we write the low SPR word first, 916 * and our interrupt entry code checks the low SPR word, any 917 * profile interrupt will actually disable interrupts in both SPRs 918 * before returning, which is OK.) 919 */ 920.Lrestore_all: 921 PTREGS_PTR(r0, PTREGS_OFFSET_EX1) 922 { 923 lw r0, r0 924 PTREGS_PTR(r32, PTREGS_OFFSET_FLAGS) 925 } 926 { 927 andi r0, r0, SPR_EX_CONTEXT_1_1__PL_MASK 928 lw r32, r32 929 } 930 bnz r0, 1f 931 j 2f 932#if PT_FLAGS_DISABLE_IRQ != 1 933# error Assuming PT_FLAGS_DISABLE_IRQ == 1 so we can use bbnst below 934#endif 9351: bbnst r32, 2f 936 IRQ_DISABLE(r20,r21) 937 TRACE_IRQS_OFF 938 movei r0, 1 939 mtspr INTERRUPT_CRITICAL_SECTION, r0 940 bzt r30, .Lrestore_regs 941 j 3f 9422: TRACE_IRQS_ON 943 movei r0, 1 944 mtspr INTERRUPT_CRITICAL_SECTION, r0 945 IRQ_ENABLE(r20, r21) 946 bzt r30, .Lrestore_regs 9473: 948 949 /* We are relying on INT_PERF_COUNT at 33, and AUX_PERF_COUNT at 48 */ 950 { 951 moveli r0, lo16(1 << (INT_PERF_COUNT - 32)) 952 bz r31, .Lrestore_regs 953 } 954 auli r0, r0, ha16(1 << (INT_AUX_PERF_COUNT - 32)) 955 mtspr SPR_INTERRUPT_MASK_RESET_K_1, r0 956 957 /* 958 * We now commit to returning from this interrupt, since we will be 959 * doing things like setting EX_CONTEXT SPRs and unwinding the stack 960 * frame. No calls should be made to any other code after this point. 961 * This code should only be entered with ICS set. 962 * r32 must still be set to ptregs.flags. 963 * We launch loads to each cache line separately first, so we can 964 * get some parallelism out of the memory subsystem. 965 * We start zeroing caller-saved registers throughout, since 966 * that will save some cycles if this turns out to be a syscall. 967 */ 968.Lrestore_regs: 969 FEEDBACK_REENTER(interrupt_return) /* called from elsewhere */ 970 971 /* 972 * Rotate so we have one high bit and one low bit to test. 973 * - low bit says whether to restore all the callee-saved registers, 974 * or just r30-r33, and r52 up. 975 * - high bit (i.e. sign bit) says whether to restore all the 976 * caller-saved registers, or just r0. 977 */ 978#if PT_FLAGS_CALLER_SAVES != 2 || PT_FLAGS_RESTORE_REGS != 4 979# error Rotate trick does not work :-) 980#endif 981 { 982 rli r20, r32, 30 983 PTREGS_PTR(sp, PTREGS_OFFSET_REG(0)) 984 } 985 986 /* 987 * Load cache lines 0, 2, and 3 in that order, then use 988 * the last loaded value, which makes it likely that the other 989 * cache lines have also loaded, at which point we should be 990 * able to safely read all the remaining words on those cache 991 * lines without waiting for the memory subsystem. 992 */ 993 pop_reg_zero r0, r28, sp, PTREGS_OFFSET_REG(30) - PTREGS_OFFSET_REG(0) 994 pop_reg_zero r30, r2, sp, PTREGS_OFFSET_PC - PTREGS_OFFSET_REG(30) 995 pop_reg_zero r21, r3, sp, PTREGS_OFFSET_EX1 - PTREGS_OFFSET_PC 996 pop_reg_zero lr, r4, sp, PTREGS_OFFSET_REG(52) - PTREGS_OFFSET_EX1 997 { 998 mtspr SPR_EX_CONTEXT_K_0, r21 999 move r5, zero 1000 } 1001 { 1002 mtspr SPR_EX_CONTEXT_K_1, lr 1003 andi lr, lr, SPR_EX_CONTEXT_1_1__PL_MASK /* mask off ICS */ 1004 } 1005 1006 /* Restore callee-saveds that we actually use. */ 1007 pop_reg_zero r52, r6, sp, PTREGS_OFFSET_REG(31) - PTREGS_OFFSET_REG(52) 1008 pop_reg_zero r31, r7 1009 pop_reg_zero r32, r8 1010 pop_reg_zero r33, r9, sp, PTREGS_OFFSET_REG(29) - PTREGS_OFFSET_REG(33) 1011 1012 /* 1013 * If we modified other callee-saveds, restore them now. 1014 * This is rare, but could be via ptrace or signal handler. 1015 */ 1016 { 1017 move r10, zero 1018 bbs r20, .Lrestore_callees 1019 } 1020.Lcontinue_restore_regs: 1021 1022 /* Check if we're returning from a syscall. */ 1023 { 1024 move r11, zero 1025 blzt r20, 1f /* no, so go restore callee-save registers */ 1026 } 1027 1028 /* 1029 * Check if we're returning to userspace. 1030 * Note that if we're not, we don't worry about zeroing everything. 1031 */ 1032 { 1033 addli sp, sp, PTREGS_OFFSET_LR - PTREGS_OFFSET_REG(29) 1034 bnz lr, .Lkernel_return 1035 } 1036 1037 /* 1038 * On return from syscall, we've restored r0 from pt_regs, but we 1039 * clear the remainder of the caller-saved registers. We could 1040 * restore the syscall arguments, but there's not much point, 1041 * and it ensures user programs aren't trying to use the 1042 * caller-saves if we clear them, as well as avoiding leaking 1043 * kernel pointers into userspace. 1044 */ 1045 pop_reg_zero lr, r12, sp, PTREGS_OFFSET_TP - PTREGS_OFFSET_LR 1046 pop_reg_zero tp, r13, sp, PTREGS_OFFSET_SP - PTREGS_OFFSET_TP 1047 { 1048 lw sp, sp 1049 move r14, zero 1050 move r15, zero 1051 } 1052 { move r16, zero; move r17, zero } 1053 { move r18, zero; move r19, zero } 1054 { move r20, zero; move r21, zero } 1055 { move r22, zero; move r23, zero } 1056 { move r24, zero; move r25, zero } 1057 { move r26, zero; move r27, zero } 1058 1059 /* Set r1 to errno if we are returning an error, otherwise zero. */ 1060 { 1061 moveli r29, 4096 1062 sub r1, zero, r0 1063 } 1064 slt_u r29, r1, r29 1065 { 1066 mnz r1, r29, r1 1067 move r29, zero 1068 } 1069 iret 1070 1071 /* 1072 * Not a syscall, so restore caller-saved registers. 1073 * First kick off a load for cache line 1, which we're touching 1074 * for the first time here. 1075 */ 1076 .align 64 10771: pop_reg r29, sp, PTREGS_OFFSET_REG(1) - PTREGS_OFFSET_REG(29) 1078 pop_reg r1 1079 pop_reg r2 1080 pop_reg r3 1081 pop_reg r4 1082 pop_reg r5 1083 pop_reg r6 1084 pop_reg r7 1085 pop_reg r8 1086 pop_reg r9 1087 pop_reg r10 1088 pop_reg r11 1089 pop_reg r12 1090 pop_reg r13 1091 pop_reg r14 1092 pop_reg r15 1093 pop_reg r16 1094 pop_reg r17 1095 pop_reg r18 1096 pop_reg r19 1097 pop_reg r20 1098 pop_reg r21 1099 pop_reg r22 1100 pop_reg r23 1101 pop_reg r24 1102 pop_reg r25 1103 pop_reg r26 1104 pop_reg r27 1105 pop_reg r28, sp, PTREGS_OFFSET_LR - PTREGS_OFFSET_REG(28) 1106 /* r29 already restored above */ 1107 bnz lr, .Lkernel_return 1108 pop_reg lr, sp, PTREGS_OFFSET_TP - PTREGS_OFFSET_LR 1109 pop_reg tp, sp, PTREGS_OFFSET_SP - PTREGS_OFFSET_TP 1110 lw sp, sp 1111 iret 1112 1113 /* 1114 * We can't restore tp when in kernel mode, since a thread might 1115 * have migrated from another cpu and brought a stale tp value. 1116 */ 1117.Lkernel_return: 1118 pop_reg lr, sp, PTREGS_OFFSET_SP - PTREGS_OFFSET_LR 1119 lw sp, sp 1120 iret 1121 1122 /* Restore callee-saved registers from r34 to r51. */ 1123.Lrestore_callees: 1124 addli sp, sp, PTREGS_OFFSET_REG(34) - PTREGS_OFFSET_REG(29) 1125 pop_reg r34 1126 pop_reg r35 1127 pop_reg r36 1128 pop_reg r37 1129 pop_reg r38 1130 pop_reg r39 1131 pop_reg r40 1132 pop_reg r41 1133 pop_reg r42 1134 pop_reg r43 1135 pop_reg r44 1136 pop_reg r45 1137 pop_reg r46 1138 pop_reg r47 1139 pop_reg r48 1140 pop_reg r49 1141 pop_reg r50 1142 pop_reg r51, sp, PTREGS_OFFSET_REG(29) - PTREGS_OFFSET_REG(51) 1143 j .Lcontinue_restore_regs 1144 STD_ENDPROC(interrupt_return) 1145 1146 /* 1147 * Some interrupts don't check for single stepping 1148 */ 1149 .pushsection .text.handle_interrupt_no_single_step,"ax" 1150handle_interrupt_no_single_step: 1151 finish_interrupt_save handle_interrupt_no_single_step 1152 { 1153 jalr r0 1154 PTREGS_PTR(r0, PTREGS_OFFSET_BASE) 1155 } 1156 FEEDBACK_REENTER(handle_interrupt_no_single_step) 1157 { 1158 movei r30, 0 /* not an NMI */ 1159 j interrupt_return 1160 } 1161 STD_ENDPROC(handle_interrupt_no_single_step) 1162 1163 /* 1164 * "NMI" interrupts mask ALL interrupts before calling the 1165 * handler, and don't check thread flags, etc., on the way 1166 * back out. In general, the only things we do here for NMIs 1167 * are the register save/restore, fixing the PC if we were 1168 * doing single step, and the dataplane kernel-TLB management. 1169 * We don't (for example) deal with start/stop of the sched tick. 1170 */ 1171 .pushsection .text.handle_nmi,"ax" 1172handle_nmi: 1173 finish_interrupt_save handle_nmi 1174 check_single_stepping normal, .Ldispatch_nmi 1175.Ldispatch_nmi: 1176 { 1177 jalr r0 1178 PTREGS_PTR(r0, PTREGS_OFFSET_BASE) 1179 } 1180 FEEDBACK_REENTER(handle_nmi) 1181 { 1182 movei r30, 1 1183 seq r31, r0, zero 1184 } 1185 j interrupt_return 1186 STD_ENDPROC(handle_nmi) 1187 1188 /* 1189 * Parallel code for syscalls to handle_interrupt. 1190 */ 1191 .pushsection .text.handle_syscall,"ax" 1192handle_syscall: 1193 finish_interrupt_save handle_syscall 1194 1195 /* 1196 * Check for if we are single stepping in user level. If so, then 1197 * we need to restore the PC. 1198 */ 1199 check_single_stepping syscall, .Ldispatch_syscall 1200.Ldispatch_syscall: 1201 1202 /* Enable irqs. */ 1203 TRACE_IRQS_ON 1204 IRQ_ENABLE(r20, r21) 1205 1206 /* Bump the counter for syscalls made on this tile. */ 1207 moveli r20, lo16(irq_stat + IRQ_CPUSTAT_SYSCALL_COUNT_OFFSET) 1208 auli r20, r20, ha16(irq_stat + IRQ_CPUSTAT_SYSCALL_COUNT_OFFSET) 1209 add r20, r20, tp 1210 lw r21, r20 1211 addi r21, r21, 1 1212 { 1213 sw r20, r21 1214 GET_THREAD_INFO(r31) 1215 } 1216 1217 /* Trace syscalls, if requested. */ 1218 addi r31, r31, THREAD_INFO_FLAGS_OFFSET 1219 lw r30, r31 1220 andi r30, r30, _TIF_SYSCALL_TRACE 1221 bzt r30, .Lrestore_syscall_regs 1222 { 1223 PTREGS_PTR(r0, PTREGS_OFFSET_BASE) 1224 jal do_syscall_trace_enter 1225 } 1226 FEEDBACK_REENTER(handle_syscall) 1227 1228 /* 1229 * We always reload our registers from the stack at this 1230 * point. They might be valid, if we didn't build with 1231 * TRACE_IRQFLAGS, and this isn't a dataplane tile, and we're not 1232 * doing syscall tracing, but there are enough cases now that it 1233 * seems simplest just to do the reload unconditionally. 1234 */ 1235.Lrestore_syscall_regs: 1236 PTREGS_PTR(r11, PTREGS_OFFSET_REG(0)) 1237 pop_reg r0, r11 1238 pop_reg r1, r11 1239 pop_reg r2, r11 1240 pop_reg r3, r11 1241 pop_reg r4, r11 1242 pop_reg r5, r11, PTREGS_OFFSET_SYSCALL - PTREGS_OFFSET_REG(5) 1243 pop_reg TREG_SYSCALL_NR_NAME, r11 1244 1245 /* Ensure that the syscall number is within the legal range. */ 1246 moveli r21, __NR_syscalls 1247 { 1248 slt_u r21, TREG_SYSCALL_NR_NAME, r21 1249 moveli r20, lo16(sys_call_table) 1250 } 1251 { 1252 bbns r21, .Linvalid_syscall 1253 auli r20, r20, ha16(sys_call_table) 1254 } 1255 s2a r20, TREG_SYSCALL_NR_NAME, r20 1256 lw r20, r20 1257 1258 /* Jump to syscall handler. */ 1259 jalr r20 1260.Lhandle_syscall_link: /* value of "lr" after "jalr r20" above */ 1261 1262 /* 1263 * Write our r0 onto the stack so it gets restored instead 1264 * of whatever the user had there before. 1265 */ 1266 PTREGS_PTR(r29, PTREGS_OFFSET_REG(0)) 1267 sw r29, r0 1268 1269.Lsyscall_sigreturn_skip: 1270 FEEDBACK_REENTER(handle_syscall) 1271 1272 /* Do syscall trace again, if requested. */ 1273 lw r30, r31 1274 andi r30, r30, _TIF_SYSCALL_TRACE 1275 bzt r30, 1f 1276 { 1277 PTREGS_PTR(r0, PTREGS_OFFSET_BASE) 1278 jal do_syscall_trace_exit 1279 } 1280 FEEDBACK_REENTER(handle_syscall) 12811: { 1282 movei r30, 0 /* not an NMI */ 1283 j .Lresume_userspace /* jump into middle of interrupt_return */ 1284 } 1285 1286.Linvalid_syscall: 1287 /* Report an invalid syscall back to the user program */ 1288 { 1289 PTREGS_PTR(r29, PTREGS_OFFSET_REG(0)) 1290 movei r28, -ENOSYS 1291 } 1292 sw r29, r28 1293 { 1294 movei r30, 0 /* not an NMI */ 1295 j .Lresume_userspace /* jump into middle of interrupt_return */ 1296 } 1297 STD_ENDPROC(handle_syscall) 1298 1299 /* Return the address for oprofile to suppress in backtraces. */ 1300STD_ENTRY_SECTION(handle_syscall_link_address, .text.handle_syscall) 1301 lnk r0 1302 { 1303 addli r0, r0, .Lhandle_syscall_link - . 1304 jrp lr 1305 } 1306 STD_ENDPROC(handle_syscall_link_address) 1307 1308STD_ENTRY(ret_from_fork) 1309 jal sim_notify_fork 1310 jal schedule_tail 1311 FEEDBACK_REENTER(ret_from_fork) 1312 { 1313 movei r30, 0 /* not an NMI */ 1314 j .Lresume_userspace /* jump into middle of interrupt_return */ 1315 } 1316 STD_ENDPROC(ret_from_fork) 1317 1318STD_ENTRY(ret_from_kernel_thread) 1319 jal sim_notify_fork 1320 jal schedule_tail 1321 FEEDBACK_REENTER(ret_from_fork) 1322 { 1323 move r0, r31 1324 jalr r30 1325 } 1326 FEEDBACK_REENTER(ret_from_kernel_thread) 1327 { 1328 movei r30, 0 /* not an NMI */ 1329 j .Lresume_userspace /* jump into middle of interrupt_return */ 1330 } 1331 STD_ENDPROC(ret_from_kernel_thread) 1332 1333 /* 1334 * Code for ill interrupt. 1335 */ 1336 .pushsection .text.handle_ill,"ax" 1337handle_ill: 1338 finish_interrupt_save handle_ill 1339 1340 /* 1341 * Check for if we are single stepping in user level. If so, then 1342 * we need to restore the PC. 1343 */ 1344 check_single_stepping ill, .Ldispatch_normal_ill 1345 1346 { 1347 /* See if the PC is the 1st bundle in the buffer */ 1348 seq r25, r27, r26 1349 1350 /* Point to the 2nd bundle in the buffer */ 1351 addi r26, r26, 8 1352 } 1353 { 1354 /* Point to the original pc */ 1355 addi r24, r29, SINGLESTEP_STATE_ORIG_PC_OFFSET 1356 1357 /* Branch if the PC is the 1st bundle in the buffer */ 1358 bnz r25, 3f 1359 } 1360 { 1361 /* See if the PC is the 2nd bundle of the buffer */ 1362 seq r25, r27, r26 1363 1364 /* Set PC to next instruction */ 1365 addi r24, r29, SINGLESTEP_STATE_NEXT_PC_OFFSET 1366 } 1367 { 1368 /* Point to flags */ 1369 addi r25, r29, SINGLESTEP_STATE_FLAGS_OFFSET 1370 1371 /* Branch if PC is in the second bundle */ 1372 bz r25, 2f 1373 } 1374 /* Load flags */ 1375 lw r25, r25 1376 { 1377 /* 1378 * Get the offset for the register to restore 1379 * Note: the lower bound is 2, so we have implicit scaling by 4. 1380 * No multiplication of the register number by the size of a register 1381 * is needed. 1382 */ 1383 mm r27, r25, zero, SINGLESTEP_STATE_TARGET_LB, \ 1384 SINGLESTEP_STATE_TARGET_UB 1385 1386 /* Mask Rewrite_LR */ 1387 andi r25, r25, SINGLESTEP_STATE_MASK_UPDATE 1388 } 1389 { 1390 addi r29, r29, SINGLESTEP_STATE_UPDATE_VALUE_OFFSET 1391 1392 /* Don't rewrite temp register */ 1393 bz r25, 3f 1394 } 1395 { 1396 /* Get the temp value */ 1397 lw r29, r29 1398 1399 /* Point to where the register is stored */ 1400 add r27, r27, sp 1401 } 1402 1403 /* Add in the C ABI save area size to the register offset */ 1404 addi r27, r27, C_ABI_SAVE_AREA_SIZE 1405 1406 /* Restore the user's register with the temp value */ 1407 sw r27, r29 1408 j 3f 1409 14102: 1411 /* Must be in the third bundle */ 1412 addi r24, r29, SINGLESTEP_STATE_BRANCH_NEXT_PC_OFFSET 1413 14143: 1415 /* set PC and continue */ 1416 lw r26, r24 1417 { 1418 sw r28, r26 1419 GET_THREAD_INFO(r0) 1420 } 1421 1422 /* 1423 * Clear TIF_SINGLESTEP to prevent recursion if we execute an ill. 1424 * The normal non-arch flow redundantly clears TIF_SINGLESTEP, but we 1425 * need to clear it here and can't really impose on all other arches. 1426 * So what's another write between friends? 1427 */ 1428 1429 addi r1, r0, THREAD_INFO_FLAGS_OFFSET 1430 { 1431 lw r2, r1 1432 addi r0, r0, THREAD_INFO_TASK_OFFSET /* currently a no-op */ 1433 } 1434 andi r2, r2, ~_TIF_SINGLESTEP 1435 sw r1, r2 1436 1437 /* Issue a sigtrap */ 1438 { 1439 lw r0, r0 /* indirect thru thread_info to get task_info*/ 1440 addi r1, sp, C_ABI_SAVE_AREA_SIZE /* put ptregs pointer into r1 */ 1441 } 1442 1443 jal send_sigtrap /* issue a SIGTRAP */ 1444 FEEDBACK_REENTER(handle_ill) 1445 { 1446 movei r30, 0 /* not an NMI */ 1447 j .Lresume_userspace /* jump into middle of interrupt_return */ 1448 } 1449 1450.Ldispatch_normal_ill: 1451 { 1452 jalr r0 1453 PTREGS_PTR(r0, PTREGS_OFFSET_BASE) 1454 } 1455 FEEDBACK_REENTER(handle_ill) 1456 { 1457 movei r30, 0 /* not an NMI */ 1458 j interrupt_return 1459 } 1460 STD_ENDPROC(handle_ill) 1461 1462/* Various stub interrupt handlers and syscall handlers */ 1463 1464STD_ENTRY_LOCAL(_kernel_double_fault) 1465 mfspr r1, SPR_EX_CONTEXT_K_0 1466 move r2, lr 1467 move r3, sp 1468 move r4, r52 1469 addi sp, sp, -C_ABI_SAVE_AREA_SIZE 1470 j kernel_double_fault 1471 STD_ENDPROC(_kernel_double_fault) 1472 1473STD_ENTRY_LOCAL(bad_intr) 1474 mfspr r2, SPR_EX_CONTEXT_K_0 1475 panic "Unhandled interrupt %#x: PC %#lx" 1476 STD_ENDPROC(bad_intr) 1477 1478/* 1479 * Special-case sigreturn to not write r0 to the stack on return. 1480 * This is technically more efficient, but it also avoids difficulties 1481 * in the 64-bit OS when handling 32-bit compat code, since we must not 1482 * sign-extend r0 for the sigreturn return-value case. 1483 */ 1484#define PTREGS_SYSCALL_SIGRETURN(x, reg) \ 1485 STD_ENTRY(_##x); \ 1486 addli lr, lr, .Lsyscall_sigreturn_skip - .Lhandle_syscall_link; \ 1487 { \ 1488 PTREGS_PTR(reg, PTREGS_OFFSET_BASE); \ 1489 j x \ 1490 }; \ 1491 STD_ENDPROC(_##x) 1492 1493PTREGS_SYSCALL_SIGRETURN(sys_rt_sigreturn, r0) 1494 1495/* Save additional callee-saves to pt_regs and jump to standard function. */ 1496STD_ENTRY(_sys_clone) 1497 push_extra_callee_saves r4 1498 j sys_clone 1499 STD_ENDPROC(_sys_clone) 1500 1501/* 1502 * This entrypoint is taken for the cmpxchg and atomic_update fast 1503 * swints. We may wish to generalize it to other fast swints at some 1504 * point, but for now there are just two very similar ones, which 1505 * makes it faster. 1506 * 1507 * The fast swint code is designed to have a small footprint. It does 1508 * not save or restore any GPRs, counting on the caller-save registers 1509 * to be available to it on entry. It does not modify any callee-save 1510 * registers (including "lr"). It does not check what PL it is being 1511 * called at, so you'd better not call it other than at PL0. 1512 * The <atomic.h> wrapper assumes it only clobbers r20-r29, so if 1513 * it ever is necessary to use more registers, be aware. 1514 * 1515 * It does not use the stack, but since it might be re-interrupted by 1516 * a page fault which would assume the stack was valid, it does 1517 * save/restore the stack pointer and zero it out to make sure it gets reset. 1518 * Since we always keep interrupts disabled, the hypervisor won't 1519 * clobber our EX_CONTEXT_K_x registers, so we don't save/restore them 1520 * (other than to advance the PC on return). 1521 * 1522 * We have to manually validate the user vs kernel address range 1523 * (since at PL1 we can read/write both), and for performance reasons 1524 * we don't allow cmpxchg on the fc000000 memory region, since we only 1525 * validate that the user address is below PAGE_OFFSET. 1526 * 1527 * We place it in the __HEAD section to ensure it is relatively 1528 * near to the intvec_SWINT_1 code (reachable by a conditional branch). 1529 * 1530 * Our use of ATOMIC_LOCK_REG here must match do_page_fault_ics(). 1531 * 1532 * As we do in lib/atomic_asm_32.S, we bypass a store if the value we 1533 * would store is the same as the value we just loaded. 1534 */ 1535 __HEAD 1536 .align 64 1537 /* Align much later jump on the start of a cache line. */ 1538 nop 1539#if PAGE_SIZE >= 0x10000 1540 nop 1541#endif 1542ENTRY(sys_cmpxchg) 1543 1544 /* 1545 * Save "sp" and set it zero for any possible page fault. 1546 * 1547 * HACK: We want to both zero sp and check r0's alignment, 1548 * so we do both at once. If "sp" becomes nonzero we 1549 * know r0 is unaligned and branch to the error handler that 1550 * restores sp, so this is OK. 1551 * 1552 * ICS is disabled right now so having a garbage but nonzero 1553 * sp is OK, since we won't execute any faulting instructions 1554 * when it is nonzero. 1555 */ 1556 { 1557 move r27, sp 1558 andi sp, r0, 3 1559 } 1560 1561 /* 1562 * Get the lock address in ATOMIC_LOCK_REG, and also validate that the 1563 * address is less than PAGE_OFFSET, since that won't trap at PL1. 1564 * We only use bits less than PAGE_SHIFT to avoid having to worry 1565 * about aliasing among multiple mappings of the same physical page, 1566 * and we ignore the low 3 bits so we have one lock that covers 1567 * both a cmpxchg64() and a cmpxchg() on either its low or high word. 1568 * NOTE: this must match __atomic_hashed_lock() in lib/atomic_32.c. 1569 */ 1570 1571#if (PAGE_OFFSET & 0xffff) != 0 1572# error Code here assumes PAGE_OFFSET can be loaded with just hi16() 1573#endif 1574 1575 { 1576 /* Check for unaligned input. */ 1577 bnz sp, .Lcmpxchg_badaddr 1578 auli r23, zero, hi16(PAGE_OFFSET) /* hugepage-aligned */ 1579 } 1580 { 1581 /* 1582 * Slide bits into position for 'mm'. We want to ignore 1583 * the low 3 bits of r0, and consider only the next 1584 * ATOMIC_HASH_SHIFT bits. 1585 * Because of C pointer arithmetic, we want to compute this: 1586 * 1587 * ((char*)atomic_locks + 1588 * (((r0 >> 3) & ((1 << ATOMIC_HASH_SHIFT) - 1)) << 2)) 1589 * 1590 * Instead of two shifts we just ">> 1", and use 'mm' 1591 * to ignore the low and high bits we don't want. 1592 */ 1593 shri r25, r0, 1 1594 1595 slt_u r23, r0, r23 1596 1597 /* 1598 * Ensure that the TLB is loaded before we take out the lock. 1599 * This will start fetching the value all the way into our L1 1600 * as well (and if it gets modified before we grab the lock, 1601 * it will be invalidated from our cache before we reload it). 1602 */ 1603 lw r26, r0 1604 } 1605 { 1606 auli r21, zero, ha16(atomic_locks) 1607 1608 bbns r23, .Lcmpxchg_badaddr 1609 } 1610#if PAGE_SIZE < 0x10000 1611 /* atomic_locks is page-aligned so for big pages we don't need this. */ 1612 addli r21, r21, lo16(atomic_locks) 1613#endif 1614 { 1615 /* 1616 * Insert the hash bits into the page-aligned pointer. 1617 * ATOMIC_HASH_SHIFT is so big that we don't actually hash 1618 * the unmasked address bits, as that may cause unnecessary 1619 * collisions. 1620 */ 1621 mm ATOMIC_LOCK_REG_NAME, r25, r21, 2, (ATOMIC_HASH_SHIFT + 2) - 1 1622 1623 seqi r23, TREG_SYSCALL_NR_NAME, __NR_FAST_cmpxchg64 1624 } 1625 { 1626 /* Branch away at this point if we're doing a 64-bit cmpxchg. */ 1627 bbs r23, .Lcmpxchg64 1628 andi r23, r0, 7 /* Precompute alignment for cmpxchg64. */ 1629 } 1630 { 1631 /* 1632 * We very carefully align the code that actually runs with 1633 * the lock held (twelve bundles) so that we know it is all in 1634 * the icache when we start. This instruction (the jump) is 1635 * at the start of the first cache line, address zero mod 64; 1636 * we jump to the very end of the second cache line to get that 1637 * line loaded in the icache, then fall through to issue the tns 1638 * in the third cache line, at which point it's all cached. 1639 * Note that is for performance, not correctness. 1640 */ 1641 j .Lcmpxchg32_tns 1642 } 1643 1644/* Symbol for do_page_fault_ics() to use to compare against the PC. */ 1645.global __sys_cmpxchg_grab_lock 1646__sys_cmpxchg_grab_lock: 1647 1648 /* 1649 * Perform the actual cmpxchg or atomic_update. 1650 */ 1651.Ldo_cmpxchg32: 1652 { 1653 lw r21, r0 1654 seqi r23, TREG_SYSCALL_NR_NAME, __NR_FAST_atomic_update 1655 move r24, r2 1656 } 1657 { 1658 seq r22, r21, r1 /* See if cmpxchg matches. */ 1659 and r25, r21, r1 /* If atomic_update, compute (*mem & mask) */ 1660 } 1661 { 1662 or r22, r22, r23 /* Skip compare branch for atomic_update. */ 1663 add r25, r25, r2 /* Compute (*mem & mask) + addend. */ 1664 } 1665 { 1666 mvnz r24, r23, r25 /* Use atomic_update value if appropriate. */ 1667 bbns r22, .Lcmpxchg32_nostore 1668 } 1669 seq r22, r24, r21 /* Are we storing the value we loaded? */ 1670 bbs r22, .Lcmpxchg32_nostore 1671 sw r0, r24 1672 1673 /* The following instruction is the start of the second cache line. */ 1674 /* Do slow mtspr here so the following "mf" waits less. */ 1675 { 1676 move sp, r27 1677 mtspr SPR_EX_CONTEXT_K_0, r28 1678 } 1679 mf 1680 1681 { 1682 move r0, r21 1683 sw ATOMIC_LOCK_REG_NAME, zero 1684 } 1685 iret 1686 1687 /* Duplicated code here in the case where we don't overlap "mf" */ 1688.Lcmpxchg32_nostore: 1689 { 1690 move r0, r21 1691 sw ATOMIC_LOCK_REG_NAME, zero 1692 } 1693 { 1694 move sp, r27 1695 mtspr SPR_EX_CONTEXT_K_0, r28 1696 } 1697 iret 1698 1699 /* 1700 * The locking code is the same for 32-bit cmpxchg/atomic_update, 1701 * and for 64-bit cmpxchg. We provide it as a macro and put 1702 * it into both versions. We can't share the code literally 1703 * since it depends on having the right branch-back address. 1704 */ 1705 .macro cmpxchg_lock, bitwidth 1706 1707 /* Lock; if we succeed, jump back up to the read-modify-write. */ 1708#ifdef CONFIG_SMP 1709 tns r21, ATOMIC_LOCK_REG_NAME 1710#else 1711 /* 1712 * Non-SMP preserves all the lock infrastructure, to keep the 1713 * code simpler for the interesting (SMP) case. However, we do 1714 * one small optimization here and in atomic_asm.S, which is 1715 * to fake out acquiring the actual lock in the atomic_lock table. 1716 */ 1717 movei r21, 0 1718#endif 1719 1720 /* Issue the slow SPR here while the tns result is in flight. */ 1721 mfspr r28, SPR_EX_CONTEXT_K_0 1722 1723 { 1724 addi r28, r28, 8 /* return to the instruction after the swint1 */ 1725 bzt r21, .Ldo_cmpxchg\bitwidth 1726 } 1727 /* 1728 * The preceding instruction is the last thing that must be 1729 * hot in the icache before we do the "tns" above. 1730 */ 1731 1732#ifdef CONFIG_SMP 1733 /* 1734 * We failed to acquire the tns lock on our first try. Now use 1735 * bounded exponential backoff to retry, like __atomic_spinlock(). 1736 */ 1737 { 1738 moveli r23, 2048 /* maximum backoff time in cycles */ 1739 moveli r25, 32 /* starting backoff time in cycles */ 1740 } 17411: mfspr r26, CYCLE_LOW /* get start point for this backoff */ 17422: mfspr r22, CYCLE_LOW /* test to see if we've backed off enough */ 1743 sub r22, r22, r26 1744 slt r22, r22, r25 1745 bbst r22, 2b 1746 { 1747 shli r25, r25, 1 /* double the backoff; retry the tns */ 1748 tns r21, ATOMIC_LOCK_REG_NAME 1749 } 1750 slt r26, r23, r25 /* is the proposed backoff too big? */ 1751 { 1752 mvnz r25, r26, r23 1753 bzt r21, .Ldo_cmpxchg\bitwidth 1754 } 1755 j 1b 1756#endif /* CONFIG_SMP */ 1757 .endm 1758 1759.Lcmpxchg32_tns: 1760 /* 1761 * This is the last instruction on the second cache line. 1762 * The nop here loads the second line, then we fall through 1763 * to the tns to load the third line before we take the lock. 1764 */ 1765 nop 1766 cmpxchg_lock 32 1767 1768 /* 1769 * This code is invoked from sys_cmpxchg after most of the 1770 * preconditions have been checked. We still need to check 1771 * that r0 is 8-byte aligned, since if it's not we won't 1772 * actually be atomic. However, ATOMIC_LOCK_REG has the atomic 1773 * lock pointer and r27/r28 have the saved SP/PC. 1774 * r23 is holding "r0 & 7" so we can test for alignment. 1775 * The compare value is in r2/r3; the new value is in r4/r5. 1776 * On return, we must put the old value in r0/r1. 1777 */ 1778 .align 64 1779.Lcmpxchg64: 1780 { 1781 bzt r23, .Lcmpxchg64_tns 1782 } 1783 j .Lcmpxchg_badaddr 1784 1785.Ldo_cmpxchg64: 1786 { 1787 lw r21, r0 1788 addi r25, r0, 4 1789 } 1790 { 1791 lw r1, r25 1792 } 1793 seq r26, r21, r2 1794 { 1795 bz r26, .Lcmpxchg64_mismatch 1796 seq r26, r1, r3 1797 } 1798 { 1799 bz r26, .Lcmpxchg64_mismatch 1800 } 1801 sw r0, r4 1802 sw r25, r5 1803 1804 /* 1805 * The 32-bit path provides optimized "match" and "mismatch" 1806 * iret paths, but we don't have enough bundles in this cache line 1807 * to do that, so we just make even the "mismatch" path do an "mf". 1808 */ 1809.Lcmpxchg64_mismatch: 1810 { 1811 move sp, r27 1812 mtspr SPR_EX_CONTEXT_K_0, r28 1813 } 1814 mf 1815 { 1816 move r0, r21 1817 sw ATOMIC_LOCK_REG_NAME, zero 1818 } 1819 iret 1820 1821.Lcmpxchg64_tns: 1822 cmpxchg_lock 64 1823 1824 1825 /* 1826 * Reset sp and revector to sys_cmpxchg_badaddr(), which will 1827 * just raise the appropriate signal and exit. Doing it this 1828 * way means we don't have to duplicate the code in intvec.S's 1829 * int_hand macro that locates the top of the stack. 1830 */ 1831.Lcmpxchg_badaddr: 1832 { 1833 moveli TREG_SYSCALL_NR_NAME, __NR_cmpxchg_badaddr 1834 move sp, r27 1835 } 1836 j intvec_SWINT_1 1837 ENDPROC(sys_cmpxchg) 1838 ENTRY(__sys_cmpxchg_end) 1839 1840 1841/* The single-step support may need to read all the registers. */ 1842int_unalign: 1843 push_extra_callee_saves r0 1844 j do_trap 1845 1846/* Include .intrpt array of interrupt vectors */ 1847 .section ".intrpt", "ax" 1848 1849#ifndef CONFIG_USE_PMC 1850#define handle_perf_interrupt bad_intr 1851#endif 1852 1853#ifndef CONFIG_HARDWALL 1854#define do_hardwall_trap bad_intr 1855#endif 1856 1857 int_hand INT_ITLB_MISS, ITLB_MISS, \ 1858 do_page_fault, handle_interrupt_no_single_step 1859 int_hand INT_MEM_ERROR, MEM_ERROR, bad_intr 1860 int_hand INT_ILL, ILL, do_trap, handle_ill 1861 int_hand INT_GPV, GPV, do_trap 1862 int_hand INT_SN_ACCESS, SN_ACCESS, do_trap 1863 int_hand INT_IDN_ACCESS, IDN_ACCESS, do_trap 1864 int_hand INT_UDN_ACCESS, UDN_ACCESS, do_trap 1865 int_hand INT_IDN_REFILL, IDN_REFILL, bad_intr 1866 int_hand INT_UDN_REFILL, UDN_REFILL, bad_intr 1867 int_hand INT_IDN_COMPLETE, IDN_COMPLETE, bad_intr 1868 int_hand INT_UDN_COMPLETE, UDN_COMPLETE, bad_intr 1869 int_hand INT_SWINT_3, SWINT_3, do_trap 1870 int_hand INT_SWINT_2, SWINT_2, do_trap 1871 int_hand INT_SWINT_1, SWINT_1, SYSCALL, handle_syscall 1872 int_hand INT_SWINT_0, SWINT_0, do_trap 1873 int_hand INT_UNALIGN_DATA, UNALIGN_DATA, int_unalign 1874 int_hand INT_DTLB_MISS, DTLB_MISS, do_page_fault 1875 int_hand INT_DTLB_ACCESS, DTLB_ACCESS, do_page_fault 1876 int_hand INT_DMATLB_MISS, DMATLB_MISS, do_page_fault 1877 int_hand INT_DMATLB_ACCESS, DMATLB_ACCESS, do_page_fault 1878 int_hand INT_SNITLB_MISS, SNITLB_MISS, do_page_fault 1879 int_hand INT_SN_NOTIFY, SN_NOTIFY, bad_intr 1880 int_hand INT_SN_FIREWALL, SN_FIREWALL, do_hardwall_trap 1881 int_hand INT_IDN_FIREWALL, IDN_FIREWALL, bad_intr 1882 int_hand INT_UDN_FIREWALL, UDN_FIREWALL, do_hardwall_trap 1883 int_hand INT_TILE_TIMER, TILE_TIMER, do_timer_interrupt 1884 int_hand INT_IDN_TIMER, IDN_TIMER, bad_intr 1885 int_hand INT_UDN_TIMER, UDN_TIMER, bad_intr 1886 int_hand INT_DMA_NOTIFY, DMA_NOTIFY, bad_intr 1887 int_hand INT_IDN_CA, IDN_CA, bad_intr 1888 int_hand INT_UDN_CA, UDN_CA, bad_intr 1889 int_hand INT_IDN_AVAIL, IDN_AVAIL, bad_intr 1890 int_hand INT_UDN_AVAIL, UDN_AVAIL, bad_intr 1891 int_hand INT_PERF_COUNT, PERF_COUNT, \ 1892 handle_perf_interrupt, handle_nmi 1893 int_hand INT_INTCTRL_3, INTCTRL_3, bad_intr 1894#if CONFIG_KERNEL_PL == 2 1895 dc_dispatch INT_INTCTRL_2, INTCTRL_2 1896 int_hand INT_INTCTRL_1, INTCTRL_1, bad_intr 1897#else 1898 int_hand INT_INTCTRL_2, INTCTRL_2, bad_intr 1899 dc_dispatch INT_INTCTRL_1, INTCTRL_1 1900#endif 1901 int_hand INT_INTCTRL_0, INTCTRL_0, bad_intr 1902 int_hand INT_MESSAGE_RCV_DWNCL, MESSAGE_RCV_DWNCL, \ 1903 hv_message_intr 1904 int_hand INT_DEV_INTR_DWNCL, DEV_INTR_DWNCL, \ 1905 tile_dev_intr 1906 int_hand INT_I_ASID, I_ASID, bad_intr 1907 int_hand INT_D_ASID, D_ASID, bad_intr 1908 int_hand INT_DMATLB_MISS_DWNCL, DMATLB_MISS_DWNCL, \ 1909 do_page_fault 1910 int_hand INT_SNITLB_MISS_DWNCL, SNITLB_MISS_DWNCL, \ 1911 do_page_fault 1912 int_hand INT_DMATLB_ACCESS_DWNCL, DMATLB_ACCESS_DWNCL, \ 1913 do_page_fault 1914 int_hand INT_SN_CPL, SN_CPL, bad_intr 1915 int_hand INT_DOUBLE_FAULT, DOUBLE_FAULT, do_trap 1916 int_hand INT_AUX_PERF_COUNT, AUX_PERF_COUNT, \ 1917 handle_perf_interrupt, handle_nmi 1918 1919 /* Synthetic interrupt delivered only by the simulator */ 1920 int_hand INT_BREAKPOINT, BREAKPOINT, do_breakpoint 1921