1/* 2 * sun4m irq support 3 * 4 * djhr: Hacked out of irq.c into a CPU dependent version. 5 * 6 * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) 7 * Copyright (C) 1995 Miguel de Icaza (miguel@nuclecu.unam.mx) 8 * Copyright (C) 1995 Pete A. Zaitcev (zaitcev@yahoo.com) 9 * Copyright (C) 1996 Dave Redman (djhr@tadpole.co.uk) 10 */ 11 12#include <linux/slab.h> 13 14#include <asm/timer.h> 15#include <asm/traps.h> 16#include <asm/pgalloc.h> 17#include <asm/pgtable.h> 18#include <asm/irq.h> 19#include <asm/io.h> 20#include <asm/cacheflush.h> 21 22#include "irq.h" 23#include "kernel.h" 24 25/* Sample sun4m IRQ layout: 26 * 27 * 0x22 - Power 28 * 0x24 - ESP SCSI 29 * 0x26 - Lance ethernet 30 * 0x2b - Floppy 31 * 0x2c - Zilog uart 32 * 0x32 - SBUS level 0 33 * 0x33 - Parallel port, SBUS level 1 34 * 0x35 - SBUS level 2 35 * 0x37 - SBUS level 3 36 * 0x39 - Audio, Graphics card, SBUS level 4 37 * 0x3b - SBUS level 5 38 * 0x3d - SBUS level 6 39 * 40 * Each interrupt source has a mask bit in the interrupt registers. 41 * When the mask bit is set, this blocks interrupt deliver. So you 42 * clear the bit to enable the interrupt. 43 * 44 * Interrupts numbered less than 0x10 are software triggered interrupts 45 * and unused by Linux. 46 * 47 * Interrupt level assignment on sun4m: 48 * 49 * level source 50 * ------------------------------------------------------------ 51 * 1 softint-1 52 * 2 softint-2, VME/SBUS level 1 53 * 3 softint-3, VME/SBUS level 2 54 * 4 softint-4, onboard SCSI 55 * 5 softint-5, VME/SBUS level 3 56 * 6 softint-6, onboard ETHERNET 57 * 7 softint-7, VME/SBUS level 4 58 * 8 softint-8, onboard VIDEO 59 * 9 softint-9, VME/SBUS level 5, Module Interrupt 60 * 10 softint-10, system counter/timer 61 * 11 softint-11, VME/SBUS level 6, Floppy 62 * 12 softint-12, Keyboard/Mouse, Serial 63 * 13 softint-13, VME/SBUS level 7, ISDN Audio 64 * 14 softint-14, per-processor counter/timer 65 * 15 softint-15, Asynchronous Errors (broadcast) 66 * 67 * Each interrupt source is masked distinctly in the sun4m interrupt 68 * registers. The PIL level alone is therefore ambiguous, since multiple 69 * interrupt sources map to a single PIL. 70 * 71 * This ambiguity is resolved in the 'intr' property for device nodes 72 * in the OF device tree. Each 'intr' property entry is composed of 73 * two 32-bit words. The first word is the IRQ priority value, which 74 * is what we're intersted in. The second word is the IRQ vector, which 75 * is unused. 76 * 77 * The low 4 bits of the IRQ priority indicate the PIL, and the upper 78 * 4 bits indicate onboard vs. SBUS leveled vs. VME leveled. 0x20 79 * means onboard, 0x30 means SBUS leveled, and 0x40 means VME leveled. 80 * 81 * For example, an 'intr' IRQ priority value of 0x24 is onboard SCSI 82 * whereas a value of 0x33 is SBUS level 2. Here are some sample 83 * 'intr' property IRQ priority values from ss4, ss5, ss10, ss20, and 84 * Tadpole S3 GX systems. 85 * 86 * esp: 0x24 onboard ESP SCSI 87 * le: 0x26 onboard Lance ETHERNET 88 * p9100: 0x32 SBUS level 1 P9100 video 89 * bpp: 0x33 SBUS level 2 BPP parallel port device 90 * DBRI: 0x39 SBUS level 5 DBRI ISDN audio 91 * SUNW,leo: 0x39 SBUS level 5 LEO video 92 * pcmcia: 0x3b SBUS level 6 PCMCIA controller 93 * uctrl: 0x3b SBUS level 6 UCTRL device 94 * modem: 0x3d SBUS level 7 MODEM 95 * zs: 0x2c onboard keyboard/mouse/serial 96 * floppy: 0x2b onboard Floppy 97 * power: 0x22 onboard power device (XXX unknown mask bit XXX) 98 */ 99 100 101/* Code in entry.S needs to get at these register mappings. */ 102struct sun4m_irq_percpu __iomem *sun4m_irq_percpu[SUN4M_NCPUS]; 103struct sun4m_irq_global __iomem *sun4m_irq_global; 104 105struct sun4m_handler_data { 106 bool percpu; 107 long mask; 108}; 109 110/* Dave Redman (djhr@tadpole.co.uk) 111 * The sun4m interrupt registers. 112 */ 113#define SUN4M_INT_ENABLE 0x80000000 114#define SUN4M_INT_E14 0x00000080 115#define SUN4M_INT_E10 0x00080000 116 117#define SUN4M_INT_MASKALL 0x80000000 /* mask all interrupts */ 118#define SUN4M_INT_MODULE_ERR 0x40000000 /* module error */ 119#define SUN4M_INT_M2S_WRITE_ERR 0x20000000 /* write buffer error */ 120#define SUN4M_INT_ECC_ERR 0x10000000 /* ecc memory error */ 121#define SUN4M_INT_VME_ERR 0x08000000 /* vme async error */ 122#define SUN4M_INT_FLOPPY 0x00400000 /* floppy disk */ 123#define SUN4M_INT_MODULE 0x00200000 /* module interrupt */ 124#define SUN4M_INT_VIDEO 0x00100000 /* onboard video */ 125#define SUN4M_INT_REALTIME 0x00080000 /* system timer */ 126#define SUN4M_INT_SCSI 0x00040000 /* onboard scsi */ 127#define SUN4M_INT_AUDIO 0x00020000 /* audio/isdn */ 128#define SUN4M_INT_ETHERNET 0x00010000 /* onboard ethernet */ 129#define SUN4M_INT_SERIAL 0x00008000 /* serial ports */ 130#define SUN4M_INT_KBDMS 0x00004000 /* keyboard/mouse */ 131#define SUN4M_INT_SBUSBITS 0x00003F80 /* sbus int bits */ 132#define SUN4M_INT_VMEBITS 0x0000007F /* vme int bits */ 133 134#define SUN4M_INT_ERROR (SUN4M_INT_MODULE_ERR | \ 135 SUN4M_INT_M2S_WRITE_ERR | \ 136 SUN4M_INT_ECC_ERR | \ 137 SUN4M_INT_VME_ERR) 138 139#define SUN4M_INT_SBUS(x) (1 << (x+7)) 140#define SUN4M_INT_VME(x) (1 << (x)) 141 142/* Interrupt levels used by OBP */ 143#define OBP_INT_LEVEL_SOFT 0x10 144#define OBP_INT_LEVEL_ONBOARD 0x20 145#define OBP_INT_LEVEL_SBUS 0x30 146#define OBP_INT_LEVEL_VME 0x40 147 148#define SUN4M_TIMER_IRQ (OBP_INT_LEVEL_ONBOARD | 10) 149#define SUN4M_PROFILE_IRQ (OBP_INT_LEVEL_ONBOARD | 14) 150 151static unsigned long sun4m_imask[0x50] = { 152 /* 0x00 - SMP */ 153 0, SUN4M_SOFT_INT(1), 154 SUN4M_SOFT_INT(2), SUN4M_SOFT_INT(3), 155 SUN4M_SOFT_INT(4), SUN4M_SOFT_INT(5), 156 SUN4M_SOFT_INT(6), SUN4M_SOFT_INT(7), 157 SUN4M_SOFT_INT(8), SUN4M_SOFT_INT(9), 158 SUN4M_SOFT_INT(10), SUN4M_SOFT_INT(11), 159 SUN4M_SOFT_INT(12), SUN4M_SOFT_INT(13), 160 SUN4M_SOFT_INT(14), SUN4M_SOFT_INT(15), 161 /* 0x10 - soft */ 162 0, SUN4M_SOFT_INT(1), 163 SUN4M_SOFT_INT(2), SUN4M_SOFT_INT(3), 164 SUN4M_SOFT_INT(4), SUN4M_SOFT_INT(5), 165 SUN4M_SOFT_INT(6), SUN4M_SOFT_INT(7), 166 SUN4M_SOFT_INT(8), SUN4M_SOFT_INT(9), 167 SUN4M_SOFT_INT(10), SUN4M_SOFT_INT(11), 168 SUN4M_SOFT_INT(12), SUN4M_SOFT_INT(13), 169 SUN4M_SOFT_INT(14), SUN4M_SOFT_INT(15), 170 /* 0x20 - onboard */ 171 0, 0, 0, 0, 172 SUN4M_INT_SCSI, 0, SUN4M_INT_ETHERNET, 0, 173 SUN4M_INT_VIDEO, SUN4M_INT_MODULE, 174 SUN4M_INT_REALTIME, SUN4M_INT_FLOPPY, 175 (SUN4M_INT_SERIAL | SUN4M_INT_KBDMS), 176 SUN4M_INT_AUDIO, SUN4M_INT_E14, SUN4M_INT_MODULE_ERR, 177 /* 0x30 - sbus */ 178 0, 0, SUN4M_INT_SBUS(0), SUN4M_INT_SBUS(1), 179 0, SUN4M_INT_SBUS(2), 0, SUN4M_INT_SBUS(3), 180 0, SUN4M_INT_SBUS(4), 0, SUN4M_INT_SBUS(5), 181 0, SUN4M_INT_SBUS(6), 0, 0, 182 /* 0x40 - vme */ 183 0, 0, SUN4M_INT_VME(0), SUN4M_INT_VME(1), 184 0, SUN4M_INT_VME(2), 0, SUN4M_INT_VME(3), 185 0, SUN4M_INT_VME(4), 0, SUN4M_INT_VME(5), 186 0, SUN4M_INT_VME(6), 0, 0 187}; 188 189static void sun4m_mask_irq(struct irq_data *data) 190{ 191 struct sun4m_handler_data *handler_data = data->handler_data; 192 int cpu = smp_processor_id(); 193 194 if (handler_data->mask) { 195 unsigned long flags; 196 197 local_irq_save(flags); 198 if (handler_data->percpu) { 199 sbus_writel(handler_data->mask, &sun4m_irq_percpu[cpu]->set); 200 } else { 201 sbus_writel(handler_data->mask, &sun4m_irq_global->mask_set); 202 } 203 local_irq_restore(flags); 204 } 205} 206 207static void sun4m_unmask_irq(struct irq_data *data) 208{ 209 struct sun4m_handler_data *handler_data = data->handler_data; 210 int cpu = smp_processor_id(); 211 212 if (handler_data->mask) { 213 unsigned long flags; 214 215 local_irq_save(flags); 216 if (handler_data->percpu) { 217 sbus_writel(handler_data->mask, &sun4m_irq_percpu[cpu]->clear); 218 } else { 219 sbus_writel(handler_data->mask, &sun4m_irq_global->mask_clear); 220 } 221 local_irq_restore(flags); 222 } 223} 224 225static unsigned int sun4m_startup_irq(struct irq_data *data) 226{ 227 irq_link(data->irq); 228 sun4m_unmask_irq(data); 229 return 0; 230} 231 232static void sun4m_shutdown_irq(struct irq_data *data) 233{ 234 sun4m_mask_irq(data); 235 irq_unlink(data->irq); 236} 237 238static struct irq_chip sun4m_irq = { 239 .name = "sun4m", 240 .irq_startup = sun4m_startup_irq, 241 .irq_shutdown = sun4m_shutdown_irq, 242 .irq_mask = sun4m_mask_irq, 243 .irq_unmask = sun4m_unmask_irq, 244}; 245 246 247static unsigned int sun4m_build_device_irq(struct platform_device *op, 248 unsigned int real_irq) 249{ 250 struct sun4m_handler_data *handler_data; 251 unsigned int irq; 252 unsigned int pil; 253 254 if (real_irq >= OBP_INT_LEVEL_VME) { 255 prom_printf("Bogus sun4m IRQ %u\n", real_irq); 256 prom_halt(); 257 } 258 pil = (real_irq & 0xf); 259 irq = irq_alloc(real_irq, pil); 260 261 if (irq == 0) 262 goto out; 263 264 handler_data = irq_get_handler_data(irq); 265 if (unlikely(handler_data)) 266 goto out; 267 268 handler_data = kzalloc(sizeof(struct sun4m_handler_data), GFP_ATOMIC); 269 if (unlikely(!handler_data)) { 270 prom_printf("IRQ: kzalloc(sun4m_handler_data) failed.\n"); 271 prom_halt(); 272 } 273 274 handler_data->mask = sun4m_imask[real_irq]; 275 handler_data->percpu = real_irq < OBP_INT_LEVEL_ONBOARD; 276 irq_set_chip_and_handler_name(irq, &sun4m_irq, 277 handle_level_irq, "level"); 278 irq_set_handler_data(irq, handler_data); 279 280out: 281 return irq; 282} 283 284struct sun4m_timer_percpu { 285 u32 l14_limit; 286 u32 l14_count; 287 u32 l14_limit_noclear; 288 u32 user_timer_start_stop; 289}; 290 291static struct sun4m_timer_percpu __iomem *timers_percpu[SUN4M_NCPUS]; 292 293struct sun4m_timer_global { 294 u32 l10_limit; 295 u32 l10_count; 296 u32 l10_limit_noclear; 297 u32 reserved; 298 u32 timer_config; 299}; 300 301static struct sun4m_timer_global __iomem *timers_global; 302 303static void sun4m_clear_clock_irq(void) 304{ 305 sbus_readl(&timers_global->l10_limit); 306} 307 308void sun4m_nmi(struct pt_regs *regs) 309{ 310 unsigned long afsr, afar, si; 311 312 printk(KERN_ERR "Aieee: sun4m NMI received!\n"); 313 /* XXX HyperSparc hack XXX */ 314 __asm__ __volatile__("mov 0x500, %%g1\n\t" 315 "lda [%%g1] 0x4, %0\n\t" 316 "mov 0x600, %%g1\n\t" 317 "lda [%%g1] 0x4, %1\n\t" : 318 "=r" (afsr), "=r" (afar)); 319 printk(KERN_ERR "afsr=%08lx afar=%08lx\n", afsr, afar); 320 si = sbus_readl(&sun4m_irq_global->pending); 321 printk(KERN_ERR "si=%08lx\n", si); 322 if (si & SUN4M_INT_MODULE_ERR) 323 printk(KERN_ERR "Module async error\n"); 324 if (si & SUN4M_INT_M2S_WRITE_ERR) 325 printk(KERN_ERR "MBus/SBus async error\n"); 326 if (si & SUN4M_INT_ECC_ERR) 327 printk(KERN_ERR "ECC memory error\n"); 328 if (si & SUN4M_INT_VME_ERR) 329 printk(KERN_ERR "VME async error\n"); 330 printk(KERN_ERR "you lose buddy boy...\n"); 331 show_regs(regs); 332 prom_halt(); 333} 334 335void sun4m_unmask_profile_irq(void) 336{ 337 unsigned long flags; 338 339 local_irq_save(flags); 340 sbus_writel(sun4m_imask[SUN4M_PROFILE_IRQ], &sun4m_irq_global->mask_clear); 341 local_irq_restore(flags); 342} 343 344void sun4m_clear_profile_irq(int cpu) 345{ 346 sbus_readl(&timers_percpu[cpu]->l14_limit); 347} 348 349static void sun4m_load_profile_irq(int cpu, unsigned int limit) 350{ 351 unsigned int value = limit ? timer_value(limit) : 0; 352 sbus_writel(value, &timers_percpu[cpu]->l14_limit); 353} 354 355static void __init sun4m_init_timers(void) 356{ 357 struct device_node *dp = of_find_node_by_name(NULL, "counter"); 358 int i, err, len, num_cpu_timers; 359 unsigned int irq; 360 const u32 *addr; 361 362 if (!dp) { 363 printk(KERN_ERR "sun4m_init_timers: No 'counter' node.\n"); 364 return; 365 } 366 367 addr = of_get_property(dp, "address", &len); 368 of_node_put(dp); 369 if (!addr) { 370 printk(KERN_ERR "sun4m_init_timers: No 'address' prop.\n"); 371 return; 372 } 373 374 num_cpu_timers = (len / sizeof(u32)) - 1; 375 for (i = 0; i < num_cpu_timers; i++) { 376 timers_percpu[i] = (void __iomem *) 377 (unsigned long) addr[i]; 378 } 379 timers_global = (void __iomem *) 380 (unsigned long) addr[num_cpu_timers]; 381 382 /* Every per-cpu timer works in timer mode */ 383 sbus_writel(0x00000000, &timers_global->timer_config); 384 385#ifdef CONFIG_SMP 386 sparc_config.cs_period = SBUS_CLOCK_RATE * 2; /* 2 seconds */ 387 sparc_config.features |= FEAT_L14_ONESHOT; 388#else 389 sparc_config.cs_period = SBUS_CLOCK_RATE / HZ; /* 1/HZ sec */ 390 sparc_config.features |= FEAT_L10_CLOCKEVENT; 391#endif 392 sparc_config.features |= FEAT_L10_CLOCKSOURCE; 393 sbus_writel(timer_value(sparc_config.cs_period), 394 &timers_global->l10_limit); 395 396 master_l10_counter = &timers_global->l10_count; 397 398 irq = sun4m_build_device_irq(NULL, SUN4M_TIMER_IRQ); 399 400 err = request_irq(irq, timer_interrupt, IRQF_TIMER, "timer", NULL); 401 if (err) { 402 printk(KERN_ERR "sun4m_init_timers: Register IRQ error %d.\n", 403 err); 404 return; 405 } 406 407 for (i = 0; i < num_cpu_timers; i++) 408 sbus_writel(0, &timers_percpu[i]->l14_limit); 409 if (num_cpu_timers == 4) 410 sbus_writel(SUN4M_INT_E14, &sun4m_irq_global->mask_set); 411 412#ifdef CONFIG_SMP 413 { 414 unsigned long flags; 415 struct tt_entry *trap_table = &sparc_ttable[SP_TRAP_IRQ1 + (14 - 1)]; 416 417 /* For SMP we use the level 14 ticker, however the bootup code 418 * has copied the firmware's level 14 vector into the boot cpu's 419 * trap table, we must fix this now or we get squashed. 420 */ 421 local_irq_save(flags); 422 trap_table->inst_one = lvl14_save[0]; 423 trap_table->inst_two = lvl14_save[1]; 424 trap_table->inst_three = lvl14_save[2]; 425 trap_table->inst_four = lvl14_save[3]; 426 local_ops->cache_all(); 427 local_irq_restore(flags); 428 } 429#endif 430} 431 432void __init sun4m_init_IRQ(void) 433{ 434 struct device_node *dp = of_find_node_by_name(NULL, "interrupt"); 435 int len, i, mid, num_cpu_iregs; 436 const u32 *addr; 437 438 if (!dp) { 439 printk(KERN_ERR "sun4m_init_IRQ: No 'interrupt' node.\n"); 440 return; 441 } 442 443 addr = of_get_property(dp, "address", &len); 444 of_node_put(dp); 445 if (!addr) { 446 printk(KERN_ERR "sun4m_init_IRQ: No 'address' prop.\n"); 447 return; 448 } 449 450 num_cpu_iregs = (len / sizeof(u32)) - 1; 451 for (i = 0; i < num_cpu_iregs; i++) { 452 sun4m_irq_percpu[i] = (void __iomem *) 453 (unsigned long) addr[i]; 454 } 455 sun4m_irq_global = (void __iomem *) 456 (unsigned long) addr[num_cpu_iregs]; 457 458 local_irq_disable(); 459 460 sbus_writel(~SUN4M_INT_MASKALL, &sun4m_irq_global->mask_set); 461 for (i = 0; !cpu_find_by_instance(i, NULL, &mid); i++) 462 sbus_writel(~0x17fff, &sun4m_irq_percpu[mid]->clear); 463 464 if (num_cpu_iregs == 4) 465 sbus_writel(0, &sun4m_irq_global->interrupt_target); 466 467 sparc_config.init_timers = sun4m_init_timers; 468 sparc_config.build_device_irq = sun4m_build_device_irq; 469 sparc_config.clock_rate = SBUS_CLOCK_RATE; 470 sparc_config.clear_clock_irq = sun4m_clear_clock_irq; 471 sparc_config.load_profile_irq = sun4m_load_profile_irq; 472 473 474 /* Cannot enable interrupts until OBP ticker is disabled. */ 475} 476