1/*
2 * Interrupt handling for GE FPGA based PIC
3 *
4 * Author: Martyn Welch <martyn.welch@ge.com>
5 *
6 * 2008 (c) GE Intelligent Platforms Embedded Systems, Inc.
7 *
8 * This file is licensed under the terms of the GNU General Public License
9 * version 2.  This program is licensed "as is" without any warranty of any
10 * kind, whether express or implied.
11 */
12
13#include <linux/stddef.h>
14#include <linux/kernel.h>
15#include <linux/init.h>
16#include <linux/irq.h>
17#include <linux/interrupt.h>
18#include <linux/spinlock.h>
19
20#include <asm/byteorder.h>
21#include <asm/io.h>
22#include <asm/prom.h>
23#include <asm/irq.h>
24
25#include "ge_pic.h"
26
27#define DEBUG
28#undef DEBUG
29
30#ifdef DEBUG
31#define DBG(fmt...) do { printk(KERN_DEBUG "gef_pic: " fmt); } while (0)
32#else
33#define DBG(fmt...) do { } while (0)
34#endif
35
36#define GEF_PIC_NUM_IRQS	32
37
38/* Interrupt Controller Interface Registers */
39#define GEF_PIC_INTR_STATUS	0x0000
40
41#define GEF_PIC_INTR_MASK(cpu)	(0x0010 + (0x4 * cpu))
42#define GEF_PIC_CPU0_INTR_MASK	GEF_PIC_INTR_MASK(0)
43#define GEF_PIC_CPU1_INTR_MASK	GEF_PIC_INTR_MASK(1)
44
45#define GEF_PIC_MCP_MASK(cpu)	(0x0018 + (0x4 * cpu))
46#define GEF_PIC_CPU0_MCP_MASK	GEF_PIC_MCP_MASK(0)
47#define GEF_PIC_CPU1_MCP_MASK	GEF_PIC_MCP_MASK(1)
48
49
50static DEFINE_RAW_SPINLOCK(gef_pic_lock);
51
52static void __iomem *gef_pic_irq_reg_base;
53static struct irq_domain *gef_pic_irq_host;
54static int gef_pic_cascade_irq;
55
56/*
57 * Interrupt Controller Handling
58 *
59 * The interrupt controller handles interrupts for most on board interrupts,
60 * apart from PCI interrupts. For example on SBC610:
61 *
62 * 17:31 RO Reserved
63 * 16    RO PCI Express Doorbell 3 Status
64 * 15    RO PCI Express Doorbell 2 Status
65 * 14    RO PCI Express Doorbell 1 Status
66 * 13    RO PCI Express Doorbell 0 Status
67 * 12    RO Real Time Clock Interrupt Status
68 * 11    RO Temperature Interrupt Status
69 * 10    RO Temperature Critical Interrupt Status
70 * 9     RO Ethernet PHY1 Interrupt Status
71 * 8     RO Ethernet PHY3 Interrupt Status
72 * 7     RO PEX8548 Interrupt Status
73 * 6     RO Reserved
74 * 5     RO Watchdog 0 Interrupt Status
75 * 4     RO Watchdog 1 Interrupt Status
76 * 3     RO AXIS Message FIFO A Interrupt Status
77 * 2     RO AXIS Message FIFO B Interrupt Status
78 * 1     RO AXIS Message FIFO C Interrupt Status
79 * 0     RO AXIS Message FIFO D Interrupt Status
80 *
81 * Interrupts can be forwarded to one of two output lines. Nothing
82 * clever is done, so if the masks are incorrectly set, a single input
83 * interrupt could generate interrupts on both output lines!
84 *
85 * The dual lines are there to allow the chained interrupts to be easily
86 * passed into two different cores. We currently do not use this functionality
87 * in this driver.
88 *
89 * Controller can also be configured to generate Machine checks (MCP), again on
90 * two lines, to be attached to two different cores. It is suggested that these
91 * should be masked out.
92 */
93
94void gef_pic_cascade(unsigned int irq, struct irq_desc *desc)
95{
96	struct irq_chip *chip = irq_desc_get_chip(desc);
97	unsigned int cascade_irq;
98
99	/*
100	 * See if we actually have an interrupt, call generic handling code if
101	 * we do.
102	 */
103	cascade_irq = gef_pic_get_irq();
104
105	if (cascade_irq != NO_IRQ)
106		generic_handle_irq(cascade_irq);
107
108	chip->irq_eoi(&desc->irq_data);
109}
110
111static void gef_pic_mask(struct irq_data *d)
112{
113	unsigned long flags;
114	unsigned int hwirq = irqd_to_hwirq(d);
115	u32 mask;
116
117	raw_spin_lock_irqsave(&gef_pic_lock, flags);
118	mask = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0));
119	mask &= ~(1 << hwirq);
120	out_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0), mask);
121	raw_spin_unlock_irqrestore(&gef_pic_lock, flags);
122}
123
124static void gef_pic_mask_ack(struct irq_data *d)
125{
126	/* Don't think we actually have to do anything to ack an interrupt,
127	 * we just need to clear down the devices interrupt and it will go away
128	 */
129	gef_pic_mask(d);
130}
131
132static void gef_pic_unmask(struct irq_data *d)
133{
134	unsigned long flags;
135	unsigned int hwirq = irqd_to_hwirq(d);
136	u32 mask;
137
138	raw_spin_lock_irqsave(&gef_pic_lock, flags);
139	mask = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0));
140	mask |= (1 << hwirq);
141	out_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0), mask);
142	raw_spin_unlock_irqrestore(&gef_pic_lock, flags);
143}
144
145static struct irq_chip gef_pic_chip = {
146	.name		= "gefp",
147	.irq_mask	= gef_pic_mask,
148	.irq_mask_ack	= gef_pic_mask_ack,
149	.irq_unmask	= gef_pic_unmask,
150};
151
152
153/* When an interrupt is being configured, this call allows some flexibilty
154 * in deciding which irq_chip structure is used
155 */
156static int gef_pic_host_map(struct irq_domain *h, unsigned int virq,
157			  irq_hw_number_t hwirq)
158{
159	/* All interrupts are LEVEL sensitive */
160	irq_set_status_flags(virq, IRQ_LEVEL);
161	irq_set_chip_and_handler(virq, &gef_pic_chip, handle_level_irq);
162
163	return 0;
164}
165
166static int gef_pic_host_xlate(struct irq_domain *h, struct device_node *ct,
167			    const u32 *intspec, unsigned int intsize,
168			    irq_hw_number_t *out_hwirq, unsigned int *out_flags)
169{
170
171	*out_hwirq = intspec[0];
172	if (intsize > 1)
173		*out_flags = intspec[1];
174	else
175		*out_flags = IRQ_TYPE_LEVEL_HIGH;
176
177	return 0;
178}
179
180static const struct irq_domain_ops gef_pic_host_ops = {
181	.map	= gef_pic_host_map,
182	.xlate	= gef_pic_host_xlate,
183};
184
185
186/*
187 * Initialisation of PIC, this should be called in BSP
188 */
189void __init gef_pic_init(struct device_node *np)
190{
191	unsigned long flags;
192
193	/* Map the devices registers into memory */
194	gef_pic_irq_reg_base = of_iomap(np, 0);
195
196	raw_spin_lock_irqsave(&gef_pic_lock, flags);
197
198	/* Initialise everything as masked. */
199	out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU0_INTR_MASK, 0);
200	out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU1_INTR_MASK, 0);
201
202	out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU0_MCP_MASK, 0);
203	out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU1_MCP_MASK, 0);
204
205	raw_spin_unlock_irqrestore(&gef_pic_lock, flags);
206
207	/* Map controller */
208	gef_pic_cascade_irq = irq_of_parse_and_map(np, 0);
209	if (gef_pic_cascade_irq == NO_IRQ) {
210		printk(KERN_ERR "SBC610: failed to map cascade interrupt");
211		return;
212	}
213
214	/* Setup an irq_domain structure */
215	gef_pic_irq_host = irq_domain_add_linear(np, GEF_PIC_NUM_IRQS,
216					  &gef_pic_host_ops, NULL);
217	if (gef_pic_irq_host == NULL)
218		return;
219
220	/* Chain with parent controller */
221	irq_set_chained_handler(gef_pic_cascade_irq, gef_pic_cascade);
222}
223
224/*
225 * This is called when we receive an interrupt with apparently comes from this
226 * chip - check, returning the highest interrupt generated or return NO_IRQ
227 */
228unsigned int gef_pic_get_irq(void)
229{
230	u32 cause, mask, active;
231	unsigned int virq = NO_IRQ;
232	int hwirq;
233
234	cause = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_STATUS);
235
236	mask = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0));
237
238	active = cause & mask;
239
240	if (active) {
241		for (hwirq = GEF_PIC_NUM_IRQS - 1; hwirq > -1; hwirq--) {
242			if (active & (0x1 << hwirq))
243				break;
244		}
245		virq = irq_linear_revmap(gef_pic_irq_host,
246			(irq_hw_number_t)hwirq);
247	}
248
249	return virq;
250}
251
252