1/* 2 * Support for PCI bridges found on Power Macintoshes. 3 * 4 * Copyright (C) 2003-2005 Benjamin Herrenschmuidt (benh@kernel.crashing.org) 5 * Copyright (C) 1997 Paul Mackerras (paulus@samba.org) 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License 9 * as published by the Free Software Foundation; either version 10 * 2 of the License, or (at your option) any later version. 11 */ 12 13#include <linux/kernel.h> 14#include <linux/pci.h> 15#include <linux/delay.h> 16#include <linux/string.h> 17#include <linux/init.h> 18#include <linux/irq.h> 19#include <linux/of_pci.h> 20 21#include <asm/sections.h> 22#include <asm/io.h> 23#include <asm/prom.h> 24#include <asm/pci-bridge.h> 25#include <asm/machdep.h> 26#include <asm/pmac_feature.h> 27#include <asm/grackle.h> 28#include <asm/ppc-pci.h> 29 30#include "pmac.h" 31 32#undef DEBUG 33 34#ifdef DEBUG 35#define DBG(x...) printk(x) 36#else 37#define DBG(x...) 38#endif 39 40/* XXX Could be per-controller, but I don't think we risk anything by 41 * assuming we won't have both UniNorth and Bandit */ 42static int has_uninorth; 43#ifdef CONFIG_PPC64 44static struct pci_controller *u3_agp; 45#else 46static int has_second_ohare; 47#endif /* CONFIG_PPC64 */ 48 49extern int pcibios_assign_bus_offset; 50 51struct device_node *k2_skiplist[2]; 52 53/* 54 * Magic constants for enabling cache coherency in the bandit/PSX bridge. 55 */ 56#define BANDIT_DEVID_2 8 57#define BANDIT_REVID 3 58 59#define BANDIT_DEVNUM 11 60#define BANDIT_MAGIC 0x50 61#define BANDIT_COHERENT 0x40 62 63static int __init fixup_one_level_bus_range(struct device_node *node, int higher) 64{ 65 for (; node != 0;node = node->sibling) { 66 const int * bus_range; 67 const unsigned int *class_code; 68 int len; 69 70 /* For PCI<->PCI bridges or CardBus bridges, we go down */ 71 class_code = of_get_property(node, "class-code", NULL); 72 if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI && 73 (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) 74 continue; 75 bus_range = of_get_property(node, "bus-range", &len); 76 if (bus_range != NULL && len > 2 * sizeof(int)) { 77 if (bus_range[1] > higher) 78 higher = bus_range[1]; 79 } 80 higher = fixup_one_level_bus_range(node->child, higher); 81 } 82 return higher; 83} 84 85/* This routine fixes the "bus-range" property of all bridges in the 86 * system since they tend to have their "last" member wrong on macs 87 * 88 * Note that the bus numbers manipulated here are OF bus numbers, they 89 * are not Linux bus numbers. 90 */ 91static void __init fixup_bus_range(struct device_node *bridge) 92{ 93 int *bus_range, len; 94 struct property *prop; 95 96 /* Lookup the "bus-range" property for the hose */ 97 prop = of_find_property(bridge, "bus-range", &len); 98 if (prop == NULL || prop->length < 2 * sizeof(int)) 99 return; 100 101 bus_range = prop->value; 102 bus_range[1] = fixup_one_level_bus_range(bridge->child, bus_range[1]); 103} 104 105/* 106 * Apple MacRISC (U3, UniNorth, Bandit, Chaos) PCI controllers. 107 * 108 * The "Bandit" version is present in all early PCI PowerMacs, 109 * and up to the first ones using Grackle. Some machines may 110 * have 2 bandit controllers (2 PCI busses). 111 * 112 * "Chaos" is used in some "Bandit"-type machines as a bridge 113 * for the separate display bus. It is accessed the same 114 * way as bandit, but cannot be probed for devices. It therefore 115 * has its own config access functions. 116 * 117 * The "UniNorth" version is present in all Core99 machines 118 * (iBook, G4, new IMacs, and all the recent Apple machines). 119 * It contains 3 controllers in one ASIC. 120 * 121 * The U3 is the bridge used on G5 machines. It contains an 122 * AGP bus which is dealt with the old UniNorth access routines 123 * and a HyperTransport bus which uses its own set of access 124 * functions. 125 */ 126 127#define MACRISC_CFA0(devfn, off) \ 128 ((1 << (unsigned int)PCI_SLOT(dev_fn)) \ 129 | (((unsigned int)PCI_FUNC(dev_fn)) << 8) \ 130 | (((unsigned int)(off)) & 0xFCUL)) 131 132#define MACRISC_CFA1(bus, devfn, off) \ 133 ((((unsigned int)(bus)) << 16) \ 134 |(((unsigned int)(devfn)) << 8) \ 135 |(((unsigned int)(off)) & 0xFCUL) \ 136 |1UL) 137 138static void __iomem *macrisc_cfg_map_bus(struct pci_bus *bus, 139 unsigned int dev_fn, 140 int offset) 141{ 142 unsigned int caddr; 143 struct pci_controller *hose; 144 145 hose = pci_bus_to_host(bus); 146 if (hose == NULL) 147 return NULL; 148 149 if (bus->number == hose->first_busno) { 150 if (dev_fn < (11 << 3)) 151 return NULL; 152 caddr = MACRISC_CFA0(dev_fn, offset); 153 } else 154 caddr = MACRISC_CFA1(bus->number, dev_fn, offset); 155 156 /* Uninorth will return garbage if we don't read back the value ! */ 157 do { 158 out_le32(hose->cfg_addr, caddr); 159 } while (in_le32(hose->cfg_addr) != caddr); 160 161 offset &= has_uninorth ? 0x07 : 0x03; 162 return hose->cfg_data + offset; 163} 164 165static struct pci_ops macrisc_pci_ops = 166{ 167 .map_bus = macrisc_cfg_map_bus, 168 .read = pci_generic_config_read, 169 .write = pci_generic_config_write, 170}; 171 172#ifdef CONFIG_PPC32 173/* 174 * Verify that a specific (bus, dev_fn) exists on chaos 175 */ 176static void __iomem *chaos_map_bus(struct pci_bus *bus, unsigned int devfn, 177 int offset) 178{ 179 struct device_node *np; 180 const u32 *vendor, *device; 181 182 if (offset >= 0x100) 183 return NULL; 184 np = of_pci_find_child_device(bus->dev.of_node, devfn); 185 if (np == NULL) 186 return NULL; 187 188 vendor = of_get_property(np, "vendor-id", NULL); 189 device = of_get_property(np, "device-id", NULL); 190 if (vendor == NULL || device == NULL) 191 return NULL; 192 193 if ((*vendor == 0x106b) && (*device == 3) && (offset >= 0x10) 194 && (offset != 0x14) && (offset != 0x18) && (offset <= 0x24)) 195 return NULL; 196 197 return macrisc_cfg_map_bus(bus, devfn, offset); 198} 199 200static struct pci_ops chaos_pci_ops = 201{ 202 .map_bus = chaos_map_bus, 203 .read = pci_generic_config_read, 204 .write = pci_generic_config_write, 205}; 206 207static void __init setup_chaos(struct pci_controller *hose, 208 struct resource *addr) 209{ 210 /* assume a `chaos' bridge */ 211 hose->ops = &chaos_pci_ops; 212 hose->cfg_addr = ioremap(addr->start + 0x800000, 0x1000); 213 hose->cfg_data = ioremap(addr->start + 0xc00000, 0x1000); 214} 215#endif /* CONFIG_PPC32 */ 216 217#ifdef CONFIG_PPC64 218/* 219 * These versions of U3 HyperTransport config space access ops do not 220 * implement self-view of the HT host yet 221 */ 222 223/* 224 * This function deals with some "special cases" devices. 225 * 226 * 0 -> No special case 227 * 1 -> Skip the device but act as if the access was successful 228 * (return 0xff's on reads, eventually, cache config space 229 * accesses in a later version) 230 * -1 -> Hide the device (unsuccessful access) 231 */ 232static int u3_ht_skip_device(struct pci_controller *hose, 233 struct pci_bus *bus, unsigned int devfn) 234{ 235 struct device_node *busdn, *dn; 236 int i; 237 238 /* We only allow config cycles to devices that are in OF device-tree 239 * as we are apparently having some weird things going on with some 240 * revs of K2 on recent G5s, except for the host bridge itself, which 241 * is missing from the tree but we know we can probe. 242 */ 243 if (bus->self) 244 busdn = pci_device_to_OF_node(bus->self); 245 else if (devfn == 0) 246 return 0; 247 else 248 busdn = hose->dn; 249 for (dn = busdn->child; dn; dn = dn->sibling) 250 if (PCI_DN(dn) && PCI_DN(dn)->devfn == devfn) 251 break; 252 if (dn == NULL) 253 return -1; 254 255 /* 256 * When a device in K2 is powered down, we die on config 257 * cycle accesses. Fix that here. 258 */ 259 for (i=0; i<2; i++) 260 if (k2_skiplist[i] == dn) 261 return 1; 262 263 return 0; 264} 265 266#define U3_HT_CFA0(devfn, off) \ 267 ((((unsigned int)devfn) << 8) | offset) 268#define U3_HT_CFA1(bus, devfn, off) \ 269 (U3_HT_CFA0(devfn, off) \ 270 + (((unsigned int)bus) << 16) \ 271 + 0x01000000UL) 272 273static void __iomem *u3_ht_cfg_access(struct pci_controller *hose, u8 bus, 274 u8 devfn, u8 offset, int *swap) 275{ 276 *swap = 1; 277 if (bus == hose->first_busno) { 278 if (devfn != 0) 279 return hose->cfg_data + U3_HT_CFA0(devfn, offset); 280 *swap = 0; 281 return ((void __iomem *)hose->cfg_addr) + (offset << 2); 282 } else 283 return hose->cfg_data + U3_HT_CFA1(bus, devfn, offset); 284} 285 286static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn, 287 int offset, int len, u32 *val) 288{ 289 struct pci_controller *hose; 290 void __iomem *addr; 291 int swap; 292 293 hose = pci_bus_to_host(bus); 294 if (hose == NULL) 295 return PCIBIOS_DEVICE_NOT_FOUND; 296 if (offset >= 0x100) 297 return PCIBIOS_BAD_REGISTER_NUMBER; 298 addr = u3_ht_cfg_access(hose, bus->number, devfn, offset, &swap); 299 if (!addr) 300 return PCIBIOS_DEVICE_NOT_FOUND; 301 302 switch (u3_ht_skip_device(hose, bus, devfn)) { 303 case 0: 304 break; 305 case 1: 306 switch (len) { 307 case 1: 308 *val = 0xff; break; 309 case 2: 310 *val = 0xffff; break; 311 default: 312 *val = 0xfffffffful; break; 313 } 314 return PCIBIOS_SUCCESSFUL; 315 default: 316 return PCIBIOS_DEVICE_NOT_FOUND; 317 } 318 319 /* 320 * Note: the caller has already checked that offset is 321 * suitably aligned and that len is 1, 2 or 4. 322 */ 323 switch (len) { 324 case 1: 325 *val = in_8(addr); 326 break; 327 case 2: 328 *val = swap ? in_le16(addr) : in_be16(addr); 329 break; 330 default: 331 *val = swap ? in_le32(addr) : in_be32(addr); 332 break; 333 } 334 return PCIBIOS_SUCCESSFUL; 335} 336 337static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn, 338 int offset, int len, u32 val) 339{ 340 struct pci_controller *hose; 341 void __iomem *addr; 342 int swap; 343 344 hose = pci_bus_to_host(bus); 345 if (hose == NULL) 346 return PCIBIOS_DEVICE_NOT_FOUND; 347 if (offset >= 0x100) 348 return PCIBIOS_BAD_REGISTER_NUMBER; 349 addr = u3_ht_cfg_access(hose, bus->number, devfn, offset, &swap); 350 if (!addr) 351 return PCIBIOS_DEVICE_NOT_FOUND; 352 353 switch (u3_ht_skip_device(hose, bus, devfn)) { 354 case 0: 355 break; 356 case 1: 357 return PCIBIOS_SUCCESSFUL; 358 default: 359 return PCIBIOS_DEVICE_NOT_FOUND; 360 } 361 362 /* 363 * Note: the caller has already checked that offset is 364 * suitably aligned and that len is 1, 2 or 4. 365 */ 366 switch (len) { 367 case 1: 368 out_8(addr, val); 369 break; 370 case 2: 371 swap ? out_le16(addr, val) : out_be16(addr, val); 372 break; 373 default: 374 swap ? out_le32(addr, val) : out_be32(addr, val); 375 break; 376 } 377 return PCIBIOS_SUCCESSFUL; 378} 379 380static struct pci_ops u3_ht_pci_ops = 381{ 382 .read = u3_ht_read_config, 383 .write = u3_ht_write_config, 384}; 385 386#define U4_PCIE_CFA0(devfn, off) \ 387 ((1 << ((unsigned int)PCI_SLOT(dev_fn))) \ 388 | (((unsigned int)PCI_FUNC(dev_fn)) << 8) \ 389 | ((((unsigned int)(off)) >> 8) << 28) \ 390 | (((unsigned int)(off)) & 0xfcU)) 391 392#define U4_PCIE_CFA1(bus, devfn, off) \ 393 ((((unsigned int)(bus)) << 16) \ 394 |(((unsigned int)(devfn)) << 8) \ 395 | ((((unsigned int)(off)) >> 8) << 28) \ 396 |(((unsigned int)(off)) & 0xfcU) \ 397 |1UL) 398 399static void __iomem *u4_pcie_cfg_map_bus(struct pci_bus *bus, 400 unsigned int dev_fn, 401 int offset) 402{ 403 struct pci_controller *hose; 404 unsigned int caddr; 405 406 if (offset >= 0x1000) 407 return NULL; 408 409 hose = pci_bus_to_host(bus); 410 if (!hose) 411 return NULL; 412 413 if (bus->number == hose->first_busno) { 414 caddr = U4_PCIE_CFA0(dev_fn, offset); 415 } else 416 caddr = U4_PCIE_CFA1(bus->number, dev_fn, offset); 417 418 /* Uninorth will return garbage if we don't read back the value ! */ 419 do { 420 out_le32(hose->cfg_addr, caddr); 421 } while (in_le32(hose->cfg_addr) != caddr); 422 423 offset &= 0x03; 424 return hose->cfg_data + offset; 425} 426 427static struct pci_ops u4_pcie_pci_ops = 428{ 429 .map_bus = u4_pcie_cfg_map_bus, 430 .read = pci_generic_config_read, 431 .write = pci_generic_config_write, 432}; 433 434static void pmac_pci_fixup_u4_of_node(struct pci_dev *dev) 435{ 436 /* Apple's device-tree "hides" the root complex virtual P2P bridge 437 * on U4. However, Linux sees it, causing the PCI <-> OF matching 438 * code to fail to properly match devices below it. This works around 439 * it by setting the node of the bridge to point to the PHB node, 440 * which is not entirely correct but fixes the matching code and 441 * doesn't break anything else. It's also the simplest possible fix. 442 */ 443 if (dev->dev.of_node == NULL) 444 dev->dev.of_node = pcibios_get_phb_of_node(dev->bus); 445} 446DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_APPLE, 0x5b, pmac_pci_fixup_u4_of_node); 447 448#endif /* CONFIG_PPC64 */ 449 450#ifdef CONFIG_PPC32 451/* 452 * For a bandit bridge, turn on cache coherency if necessary. 453 * N.B. we could clean this up using the hose ops directly. 454 */ 455static void __init init_bandit(struct pci_controller *bp) 456{ 457 unsigned int vendev, magic; 458 int rev; 459 460 /* read the word at offset 0 in config space for device 11 */ 461 out_le32(bp->cfg_addr, (1UL << BANDIT_DEVNUM) + PCI_VENDOR_ID); 462 udelay(2); 463 vendev = in_le32(bp->cfg_data); 464 if (vendev == (PCI_DEVICE_ID_APPLE_BANDIT << 16) + 465 PCI_VENDOR_ID_APPLE) { 466 /* read the revision id */ 467 out_le32(bp->cfg_addr, 468 (1UL << BANDIT_DEVNUM) + PCI_REVISION_ID); 469 udelay(2); 470 rev = in_8(bp->cfg_data); 471 if (rev != BANDIT_REVID) 472 printk(KERN_WARNING 473 "Unknown revision %d for bandit\n", rev); 474 } else if (vendev != (BANDIT_DEVID_2 << 16) + PCI_VENDOR_ID_APPLE) { 475 printk(KERN_WARNING "bandit isn't? (%x)\n", vendev); 476 return; 477 } 478 479 /* read the word at offset 0x50 */ 480 out_le32(bp->cfg_addr, (1UL << BANDIT_DEVNUM) + BANDIT_MAGIC); 481 udelay(2); 482 magic = in_le32(bp->cfg_data); 483 if ((magic & BANDIT_COHERENT) != 0) 484 return; 485 magic |= BANDIT_COHERENT; 486 udelay(2); 487 out_le32(bp->cfg_data, magic); 488 printk(KERN_INFO "Cache coherency enabled for bandit/PSX\n"); 489} 490 491/* 492 * Tweak the PCI-PCI bridge chip on the blue & white G3s. 493 */ 494static void __init init_p2pbridge(void) 495{ 496 struct device_node *p2pbridge; 497 struct pci_controller* hose; 498 u8 bus, devfn; 499 u16 val; 500 501 /* XXX it would be better here to identify the specific 502 PCI-PCI bridge chip we have. */ 503 p2pbridge = of_find_node_by_name(NULL, "pci-bridge"); 504 if (p2pbridge == NULL 505 || p2pbridge->parent == NULL 506 || strcmp(p2pbridge->parent->name, "pci") != 0) 507 goto done; 508 if (pci_device_from_OF_node(p2pbridge, &bus, &devfn) < 0) { 509 DBG("Can't find PCI infos for PCI<->PCI bridge\n"); 510 goto done; 511 } 512 /* Warning: At this point, we have not yet renumbered all busses. 513 * So we must use OF walking to find out hose 514 */ 515 hose = pci_find_hose_for_OF_device(p2pbridge); 516 if (!hose) { 517 DBG("Can't find hose for PCI<->PCI bridge\n"); 518 goto done; 519 } 520 if (early_read_config_word(hose, bus, devfn, 521 PCI_BRIDGE_CONTROL, &val) < 0) { 522 printk(KERN_ERR "init_p2pbridge: couldn't read bridge" 523 " control\n"); 524 goto done; 525 } 526 val &= ~PCI_BRIDGE_CTL_MASTER_ABORT; 527 early_write_config_word(hose, bus, devfn, PCI_BRIDGE_CONTROL, val); 528done: 529 of_node_put(p2pbridge); 530} 531 532static void __init init_second_ohare(void) 533{ 534 struct device_node *np = of_find_node_by_name(NULL, "pci106b,7"); 535 unsigned char bus, devfn; 536 unsigned short cmd; 537 538 if (np == NULL) 539 return; 540 541 /* This must run before we initialize the PICs since the second 542 * ohare hosts a PIC that will be accessed there. 543 */ 544 if (pci_device_from_OF_node(np, &bus, &devfn) == 0) { 545 struct pci_controller* hose = 546 pci_find_hose_for_OF_device(np); 547 if (!hose) { 548 printk(KERN_ERR "Can't find PCI hose for OHare2 !\n"); 549 of_node_put(np); 550 return; 551 } 552 early_read_config_word(hose, bus, devfn, PCI_COMMAND, &cmd); 553 cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; 554 cmd &= ~PCI_COMMAND_IO; 555 early_write_config_word(hose, bus, devfn, PCI_COMMAND, cmd); 556 } 557 has_second_ohare = 1; 558 of_node_put(np); 559} 560 561/* 562 * Some Apple desktop machines have a NEC PD720100A USB2 controller 563 * on the motherboard. Open Firmware, on these, will disable the 564 * EHCI part of it so it behaves like a pair of OHCI's. This fixup 565 * code re-enables it ;) 566 */ 567static void __init fixup_nec_usb2(void) 568{ 569 struct device_node *nec; 570 571 for_each_node_by_name(nec, "usb") { 572 struct pci_controller *hose; 573 u32 data; 574 const u32 *prop; 575 u8 bus, devfn; 576 577 prop = of_get_property(nec, "vendor-id", NULL); 578 if (prop == NULL) 579 continue; 580 if (0x1033 != *prop) 581 continue; 582 prop = of_get_property(nec, "device-id", NULL); 583 if (prop == NULL) 584 continue; 585 if (0x0035 != *prop) 586 continue; 587 prop = of_get_property(nec, "reg", NULL); 588 if (prop == NULL) 589 continue; 590 devfn = (prop[0] >> 8) & 0xff; 591 bus = (prop[0] >> 16) & 0xff; 592 if (PCI_FUNC(devfn) != 0) 593 continue; 594 hose = pci_find_hose_for_OF_device(nec); 595 if (!hose) 596 continue; 597 early_read_config_dword(hose, bus, devfn, 0xe4, &data); 598 if (data & 1UL) { 599 printk("Found NEC PD720100A USB2 chip with disabled" 600 " EHCI, fixing up...\n"); 601 data &= ~1UL; 602 early_write_config_dword(hose, bus, devfn, 0xe4, data); 603 } 604 } 605} 606 607static void __init setup_bandit(struct pci_controller *hose, 608 struct resource *addr) 609{ 610 hose->ops = ¯isc_pci_ops; 611 hose->cfg_addr = ioremap(addr->start + 0x800000, 0x1000); 612 hose->cfg_data = ioremap(addr->start + 0xc00000, 0x1000); 613 init_bandit(hose); 614} 615 616static int __init setup_uninorth(struct pci_controller *hose, 617 struct resource *addr) 618{ 619 pci_add_flags(PCI_REASSIGN_ALL_BUS); 620 has_uninorth = 1; 621 hose->ops = ¯isc_pci_ops; 622 hose->cfg_addr = ioremap(addr->start + 0x800000, 0x1000); 623 hose->cfg_data = ioremap(addr->start + 0xc00000, 0x1000); 624 /* We "know" that the bridge at f2000000 has the PCI slots. */ 625 return addr->start == 0xf2000000; 626} 627#endif /* CONFIG_PPC32 */ 628 629#ifdef CONFIG_PPC64 630static void __init setup_u3_agp(struct pci_controller* hose) 631{ 632 /* On G5, we move AGP up to high bus number so we don't need 633 * to reassign bus numbers for HT. If we ever have P2P bridges 634 * on AGP, we'll have to move pci_assign_all_busses to the 635 * pci_controller structure so we enable it for AGP and not for 636 * HT childs. 637 * We hard code the address because of the different size of 638 * the reg address cell, we shall fix that by killing struct 639 * reg_property and using some accessor functions instead 640 */ 641 hose->first_busno = 0xf0; 642 hose->last_busno = 0xff; 643 has_uninorth = 1; 644 hose->ops = ¯isc_pci_ops; 645 hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000); 646 hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000); 647 u3_agp = hose; 648} 649 650static void __init setup_u4_pcie(struct pci_controller* hose) 651{ 652 /* We currently only implement the "non-atomic" config space, to 653 * be optimised later. 654 */ 655 hose->ops = &u4_pcie_pci_ops; 656 hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000); 657 hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000); 658 659 /* The bus contains a bridge from root -> device, we need to 660 * make it visible on bus 0 so that we pick the right type 661 * of config cycles. If we didn't, we would have to force all 662 * config cycles to be type 1. So we override the "bus-range" 663 * property here 664 */ 665 hose->first_busno = 0x00; 666 hose->last_busno = 0xff; 667} 668 669static void __init parse_region_decode(struct pci_controller *hose, 670 u32 decode) 671{ 672 unsigned long base, end, next = -1; 673 int i, cur = -1; 674 675 /* Iterate through all bits. We ignore the last bit as this region is 676 * reserved for the ROM among other niceties 677 */ 678 for (i = 0; i < 31; i++) { 679 if ((decode & (0x80000000 >> i)) == 0) 680 continue; 681 if (i < 16) { 682 base = 0xf0000000 | (((u32)i) << 24); 683 end = base + 0x00ffffff; 684 } else { 685 base = ((u32)i-16) << 28; 686 end = base + 0x0fffffff; 687 } 688 if (base != next) { 689 if (++cur >= 3) { 690 printk(KERN_WARNING "PCI: Too many ranges !\n"); 691 break; 692 } 693 hose->mem_resources[cur].flags = IORESOURCE_MEM; 694 hose->mem_resources[cur].name = hose->dn->full_name; 695 hose->mem_resources[cur].start = base; 696 hose->mem_resources[cur].end = end; 697 hose->mem_offset[cur] = 0; 698 DBG(" %d: 0x%08lx-0x%08lx\n", cur, base, end); 699 } else { 700 DBG(" : -0x%08lx\n", end); 701 hose->mem_resources[cur].end = end; 702 } 703 next = end + 1; 704 } 705} 706 707static void __init setup_u3_ht(struct pci_controller* hose) 708{ 709 struct device_node *np = hose->dn; 710 struct resource cfg_res, self_res; 711 u32 decode; 712 713 hose->ops = &u3_ht_pci_ops; 714 715 /* Get base addresses from OF tree 716 */ 717 if (of_address_to_resource(np, 0, &cfg_res) || 718 of_address_to_resource(np, 1, &self_res)) { 719 printk(KERN_ERR "PCI: Failed to get U3/U4 HT resources !\n"); 720 return; 721 } 722 723 /* Map external cfg space access into cfg_data and self registers 724 * into cfg_addr 725 */ 726 hose->cfg_data = ioremap(cfg_res.start, 0x02000000); 727 hose->cfg_addr = ioremap(self_res.start, resource_size(&self_res)); 728 729 /* 730 * /ht node doesn't expose a "ranges" property, we read the register 731 * that controls the decoding logic and use that for memory regions. 732 * The IO region is hard coded since it is fixed in HW as well. 733 */ 734 hose->io_base_phys = 0xf4000000; 735 hose->pci_io_size = 0x00400000; 736 hose->io_resource.name = np->full_name; 737 hose->io_resource.start = 0; 738 hose->io_resource.end = 0x003fffff; 739 hose->io_resource.flags = IORESOURCE_IO; 740 hose->first_busno = 0; 741 hose->last_busno = 0xef; 742 743 /* Note: fix offset when cfg_addr becomes a void * */ 744 decode = in_be32(hose->cfg_addr + 0x80); 745 746 DBG("PCI: Apple HT bridge decode register: 0x%08x\n", decode); 747 748 /* NOTE: The decode register setup is a bit weird... region 749 * 0xf8000000 for example is marked as enabled in there while it's 750 & actually the memory controller registers. 751 * That means that we are incorrectly attributing it to HT. 752 * 753 * In a similar vein, region 0xf4000000 is actually the HT IO space but 754 * also marked as enabled in here and 0xf9000000 is used by some other 755 * internal bits of the northbridge. 756 * 757 * Unfortunately, we can't just mask out those bit as we would end 758 * up with more regions than we can cope (linux can only cope with 759 * 3 memory regions for a PHB at this stage). 760 * 761 * So for now, we just do a little hack. We happen to -know- that 762 * Apple firmware doesn't assign things below 0xfa000000 for that 763 * bridge anyway so we mask out all bits we don't want. 764 */ 765 decode &= 0x003fffff; 766 767 /* Now parse the resulting bits and build resources */ 768 parse_region_decode(hose, decode); 769} 770#endif /* CONFIG_PPC64 */ 771 772/* 773 * We assume that if we have a G3 powermac, we have one bridge called 774 * "pci" (a MPC106) and no bandit or chaos bridges, and contrariwise, 775 * if we have one or more bandit or chaos bridges, we don't have a MPC106. 776 */ 777static int __init pmac_add_bridge(struct device_node *dev) 778{ 779 int len; 780 struct pci_controller *hose; 781 struct resource rsrc; 782 char *disp_name; 783 const int *bus_range; 784 int primary = 1, has_address = 0; 785 786 DBG("Adding PCI host bridge %s\n", dev->full_name); 787 788 /* Fetch host bridge registers address */ 789 has_address = (of_address_to_resource(dev, 0, &rsrc) == 0); 790 791 /* Get bus range if any */ 792 bus_range = of_get_property(dev, "bus-range", &len); 793 if (bus_range == NULL || len < 2 * sizeof(int)) { 794 printk(KERN_WARNING "Can't get bus-range for %s, assume" 795 " bus 0\n", dev->full_name); 796 } 797 798 hose = pcibios_alloc_controller(dev); 799 if (!hose) 800 return -ENOMEM; 801 hose->first_busno = bus_range ? bus_range[0] : 0; 802 hose->last_busno = bus_range ? bus_range[1] : 0xff; 803 hose->controller_ops = pmac_pci_controller_ops; 804 805 disp_name = NULL; 806 807 /* 64 bits only bridges */ 808#ifdef CONFIG_PPC64 809 if (of_device_is_compatible(dev, "u3-agp")) { 810 setup_u3_agp(hose); 811 disp_name = "U3-AGP"; 812 primary = 0; 813 } else if (of_device_is_compatible(dev, "u3-ht")) { 814 setup_u3_ht(hose); 815 disp_name = "U3-HT"; 816 primary = 1; 817 } else if (of_device_is_compatible(dev, "u4-pcie")) { 818 setup_u4_pcie(hose); 819 disp_name = "U4-PCIE"; 820 primary = 0; 821 } 822 printk(KERN_INFO "Found %s PCI host bridge. Firmware bus number:" 823 " %d->%d\n", disp_name, hose->first_busno, hose->last_busno); 824#endif /* CONFIG_PPC64 */ 825 826 /* 32 bits only bridges */ 827#ifdef CONFIG_PPC32 828 if (of_device_is_compatible(dev, "uni-north")) { 829 primary = setup_uninorth(hose, &rsrc); 830 disp_name = "UniNorth"; 831 } else if (strcmp(dev->name, "pci") == 0) { 832 /* XXX assume this is a mpc106 (grackle) */ 833 setup_grackle(hose); 834 disp_name = "Grackle (MPC106)"; 835 } else if (strcmp(dev->name, "bandit") == 0) { 836 setup_bandit(hose, &rsrc); 837 disp_name = "Bandit"; 838 } else if (strcmp(dev->name, "chaos") == 0) { 839 setup_chaos(hose, &rsrc); 840 disp_name = "Chaos"; 841 primary = 0; 842 } 843 printk(KERN_INFO "Found %s PCI host bridge at 0x%016llx. " 844 "Firmware bus number: %d->%d\n", 845 disp_name, (unsigned long long)rsrc.start, hose->first_busno, 846 hose->last_busno); 847#endif /* CONFIG_PPC32 */ 848 849 DBG(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n", 850 hose, hose->cfg_addr, hose->cfg_data); 851 852 /* Interpret the "ranges" property */ 853 /* This also maps the I/O region and sets isa_io/mem_base */ 854 pci_process_bridge_OF_ranges(hose, dev, primary); 855 856 /* Fixup "bus-range" OF property */ 857 fixup_bus_range(dev); 858 859 return 0; 860} 861 862void pmac_pci_irq_fixup(struct pci_dev *dev) 863{ 864#ifdef CONFIG_PPC32 865 /* Fixup interrupt for the modem/ethernet combo controller. 866 * on machines with a second ohare chip. 867 * The number in the device tree (27) is bogus (correct for 868 * the ethernet-only board but not the combo ethernet/modem 869 * board). The real interrupt is 28 on the second controller 870 * -> 28+32 = 60. 871 */ 872 if (has_second_ohare && 873 dev->vendor == PCI_VENDOR_ID_DEC && 874 dev->device == PCI_DEVICE_ID_DEC_TULIP_PLUS) { 875 dev->irq = irq_create_mapping(NULL, 60); 876 irq_set_irq_type(dev->irq, IRQ_TYPE_LEVEL_LOW); 877 } 878#endif /* CONFIG_PPC32 */ 879} 880 881void __init pmac_pci_init(void) 882{ 883 struct device_node *np, *root; 884 struct device_node *ht = NULL; 885 886 pci_set_flags(PCI_CAN_SKIP_ISA_ALIGN); 887 888 root = of_find_node_by_path("/"); 889 if (root == NULL) { 890 printk(KERN_CRIT "pmac_pci_init: can't find root " 891 "of device tree\n"); 892 return; 893 } 894 for (np = NULL; (np = of_get_next_child(root, np)) != NULL;) { 895 if (np->name == NULL) 896 continue; 897 if (strcmp(np->name, "bandit") == 0 898 || strcmp(np->name, "chaos") == 0 899 || strcmp(np->name, "pci") == 0) { 900 if (pmac_add_bridge(np) == 0) 901 of_node_get(np); 902 } 903 if (strcmp(np->name, "ht") == 0) { 904 of_node_get(np); 905 ht = np; 906 } 907 } 908 of_node_put(root); 909 910#ifdef CONFIG_PPC64 911 /* Probe HT last as it relies on the agp resources to be already 912 * setup 913 */ 914 if (ht && pmac_add_bridge(ht) != 0) 915 of_node_put(ht); 916 917 /* Setup the linkage between OF nodes and PHBs */ 918 pci_devs_phb_init(); 919 920 /* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We 921 * assume there is no P2P bridge on the AGP bus, which should be a 922 * safe assumptions for now. We should do something better in the 923 * future though 924 */ 925 if (u3_agp) { 926 struct device_node *np = u3_agp->dn; 927 PCI_DN(np)->busno = 0xf0; 928 for (np = np->child; np; np = np->sibling) 929 PCI_DN(np)->busno = 0xf0; 930 } 931 /* pmac_check_ht_link(); */ 932 933#else /* CONFIG_PPC64 */ 934 init_p2pbridge(); 935 init_second_ohare(); 936 fixup_nec_usb2(); 937 938 /* We are still having some issues with the Xserve G4, enabling 939 * some offset between bus number and domains for now when we 940 * assign all busses should help for now 941 */ 942 if (pci_has_flag(PCI_REASSIGN_ALL_BUS)) 943 pcibios_assign_bus_offset = 0x10; 944#endif 945} 946 947#ifdef CONFIG_PPC32 948static bool pmac_pci_enable_device_hook(struct pci_dev *dev) 949{ 950 struct device_node* node; 951 int updatecfg = 0; 952 int uninorth_child; 953 954 node = pci_device_to_OF_node(dev); 955 956 /* We don't want to enable USB controllers absent from the OF tree 957 * (iBook second controller) 958 */ 959 if (dev->vendor == PCI_VENDOR_ID_APPLE 960 && dev->class == PCI_CLASS_SERIAL_USB_OHCI 961 && !node) { 962 printk(KERN_INFO "Apple USB OHCI %s disabled by firmware\n", 963 pci_name(dev)); 964 return false; 965 } 966 967 if (!node) 968 return true; 969 970 uninorth_child = node->parent && 971 of_device_is_compatible(node->parent, "uni-north"); 972 973 /* Firewire & GMAC were disabled after PCI probe, the driver is 974 * claiming them, we must re-enable them now. 975 */ 976 if (uninorth_child && !strcmp(node->name, "firewire") && 977 (of_device_is_compatible(node, "pci106b,18") || 978 of_device_is_compatible(node, "pci106b,30") || 979 of_device_is_compatible(node, "pci11c1,5811"))) { 980 pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, node, 0, 1); 981 pmac_call_feature(PMAC_FTR_1394_ENABLE, node, 0, 1); 982 updatecfg = 1; 983 } 984 if (uninorth_child && !strcmp(node->name, "ethernet") && 985 of_device_is_compatible(node, "gmac")) { 986 pmac_call_feature(PMAC_FTR_GMAC_ENABLE, node, 0, 1); 987 updatecfg = 1; 988 } 989 990 /* 991 * Fixup various header fields on 32 bits. We don't do that on 992 * 64 bits as some of these have strange values behind the HT 993 * bridge and we must not, for example, enable MWI or set the 994 * cache line size on them. 995 */ 996 if (updatecfg) { 997 u16 cmd; 998 999 pci_read_config_word(dev, PCI_COMMAND, &cmd); 1000 cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER 1001 | PCI_COMMAND_INVALIDATE; 1002 pci_write_config_word(dev, PCI_COMMAND, cmd); 1003 pci_write_config_byte(dev, PCI_LATENCY_TIMER, 16); 1004 1005 pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 1006 L1_CACHE_BYTES >> 2); 1007 } 1008 1009 return true; 1010} 1011 1012void pmac_pci_fixup_ohci(struct pci_dev *dev) 1013{ 1014 struct device_node *node = pci_device_to_OF_node(dev); 1015 1016 /* We don't want to assign resources to USB controllers 1017 * absent from the OF tree (iBook second controller) 1018 */ 1019 if (dev->class == PCI_CLASS_SERIAL_USB_OHCI && !node) 1020 dev->resource[0].flags = 0; 1021} 1022DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_APPLE, PCI_ANY_ID, pmac_pci_fixup_ohci); 1023 1024/* We power down some devices after they have been probed. They'll 1025 * be powered back on later on 1026 */ 1027void __init pmac_pcibios_after_init(void) 1028{ 1029 struct device_node* nd; 1030 1031 for_each_node_by_name(nd, "firewire") { 1032 if (nd->parent && (of_device_is_compatible(nd, "pci106b,18") || 1033 of_device_is_compatible(nd, "pci106b,30") || 1034 of_device_is_compatible(nd, "pci11c1,5811")) 1035 && of_device_is_compatible(nd->parent, "uni-north")) { 1036 pmac_call_feature(PMAC_FTR_1394_ENABLE, nd, 0, 0); 1037 pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, nd, 0, 0); 1038 } 1039 } 1040 for_each_node_by_name(nd, "ethernet") { 1041 if (nd->parent && of_device_is_compatible(nd, "gmac") 1042 && of_device_is_compatible(nd->parent, "uni-north")) 1043 pmac_call_feature(PMAC_FTR_GMAC_ENABLE, nd, 0, 0); 1044 } 1045} 1046 1047void pmac_pci_fixup_cardbus(struct pci_dev* dev) 1048{ 1049 if (!machine_is(powermac)) 1050 return; 1051 /* 1052 * Fix the interrupt routing on the various cardbus bridges 1053 * used on powerbooks 1054 */ 1055 if (dev->vendor != PCI_VENDOR_ID_TI) 1056 return; 1057 if (dev->device == PCI_DEVICE_ID_TI_1130 || 1058 dev->device == PCI_DEVICE_ID_TI_1131) { 1059 u8 val; 1060 /* Enable PCI interrupt */ 1061 if (pci_read_config_byte(dev, 0x91, &val) == 0) 1062 pci_write_config_byte(dev, 0x91, val | 0x30); 1063 /* Disable ISA interrupt mode */ 1064 if (pci_read_config_byte(dev, 0x92, &val) == 0) 1065 pci_write_config_byte(dev, 0x92, val & ~0x06); 1066 } 1067 if (dev->device == PCI_DEVICE_ID_TI_1210 || 1068 dev->device == PCI_DEVICE_ID_TI_1211 || 1069 dev->device == PCI_DEVICE_ID_TI_1410 || 1070 dev->device == PCI_DEVICE_ID_TI_1510) { 1071 u8 val; 1072 /* 0x8c == TI122X_IRQMUX, 2 says to route the INTA 1073 signal out the MFUNC0 pin */ 1074 if (pci_read_config_byte(dev, 0x8c, &val) == 0) 1075 pci_write_config_byte(dev, 0x8c, (val & ~0x0f) | 2); 1076 /* Disable ISA interrupt mode */ 1077 if (pci_read_config_byte(dev, 0x92, &val) == 0) 1078 pci_write_config_byte(dev, 0x92, val & ~0x06); 1079 } 1080} 1081 1082DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TI, PCI_ANY_ID, pmac_pci_fixup_cardbus); 1083 1084void pmac_pci_fixup_pciata(struct pci_dev* dev) 1085{ 1086 u8 progif = 0; 1087 1088 /* 1089 * On PowerMacs, we try to switch any PCI ATA controller to 1090 * fully native mode 1091 */ 1092 if (!machine_is(powermac)) 1093 return; 1094 1095 /* Some controllers don't have the class IDE */ 1096 if (dev->vendor == PCI_VENDOR_ID_PROMISE) 1097 switch(dev->device) { 1098 case PCI_DEVICE_ID_PROMISE_20246: 1099 case PCI_DEVICE_ID_PROMISE_20262: 1100 case PCI_DEVICE_ID_PROMISE_20263: 1101 case PCI_DEVICE_ID_PROMISE_20265: 1102 case PCI_DEVICE_ID_PROMISE_20267: 1103 case PCI_DEVICE_ID_PROMISE_20268: 1104 case PCI_DEVICE_ID_PROMISE_20269: 1105 case PCI_DEVICE_ID_PROMISE_20270: 1106 case PCI_DEVICE_ID_PROMISE_20271: 1107 case PCI_DEVICE_ID_PROMISE_20275: 1108 case PCI_DEVICE_ID_PROMISE_20276: 1109 case PCI_DEVICE_ID_PROMISE_20277: 1110 goto good; 1111 } 1112 /* Others, check PCI class */ 1113 if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE) 1114 return; 1115 good: 1116 pci_read_config_byte(dev, PCI_CLASS_PROG, &progif); 1117 if ((progif & 5) != 5) { 1118 printk(KERN_INFO "PCI: %s Forcing PCI IDE into native mode\n", 1119 pci_name(dev)); 1120 (void) pci_write_config_byte(dev, PCI_CLASS_PROG, progif|5); 1121 if (pci_read_config_byte(dev, PCI_CLASS_PROG, &progif) || 1122 (progif & 5) != 5) 1123 printk(KERN_ERR "Rewrite of PROGIF failed !\n"); 1124 else { 1125 /* Clear IO BARs, they will be reassigned */ 1126 pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0); 1127 pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, 0); 1128 pci_write_config_dword(dev, PCI_BASE_ADDRESS_2, 0); 1129 pci_write_config_dword(dev, PCI_BASE_ADDRESS_3, 0); 1130 } 1131 } 1132} 1133DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, pmac_pci_fixup_pciata); 1134#endif /* CONFIG_PPC32 */ 1135 1136/* 1137 * Disable second function on K2-SATA, it's broken 1138 * and disable IO BARs on first one 1139 */ 1140static void fixup_k2_sata(struct pci_dev* dev) 1141{ 1142 int i; 1143 u16 cmd; 1144 1145 if (PCI_FUNC(dev->devfn) > 0) { 1146 pci_read_config_word(dev, PCI_COMMAND, &cmd); 1147 cmd &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY); 1148 pci_write_config_word(dev, PCI_COMMAND, cmd); 1149 for (i = 0; i < 6; i++) { 1150 dev->resource[i].start = dev->resource[i].end = 0; 1151 dev->resource[i].flags = 0; 1152 pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i, 1153 0); 1154 } 1155 } else { 1156 pci_read_config_word(dev, PCI_COMMAND, &cmd); 1157 cmd &= ~PCI_COMMAND_IO; 1158 pci_write_config_word(dev, PCI_COMMAND, cmd); 1159 for (i = 0; i < 5; i++) { 1160 dev->resource[i].start = dev->resource[i].end = 0; 1161 dev->resource[i].flags = 0; 1162 pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i, 1163 0); 1164 } 1165 } 1166} 1167DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, 0x0240, fixup_k2_sata); 1168 1169/* 1170 * On U4 (aka CPC945) the PCIe root complex "P2P" bridge resource ranges aren't 1171 * configured by the firmware. The bridge itself seems to ignore them but it 1172 * causes problems with Linux which then re-assigns devices below the bridge, 1173 * thus changing addresses of those devices from what was in the device-tree, 1174 * which sucks when those are video cards using offb 1175 * 1176 * We could just mark it transparent but I prefer fixing up the resources to 1177 * properly show what's going on here, as I have some doubts about having them 1178 * badly configured potentially being an issue for DMA. 1179 * 1180 * We leave PIO alone, it seems to be fine 1181 * 1182 * Oh and there's another funny bug. The OF properties advertize the region 1183 * 0xf1000000..0xf1ffffff as being forwarded as memory space. But that's 1184 * actually not true, this region is the memory mapped config space. So we 1185 * also need to filter it out or we'll map things in the wrong place. 1186 */ 1187static void fixup_u4_pcie(struct pci_dev* dev) 1188{ 1189 struct pci_controller *host = pci_bus_to_host(dev->bus); 1190 struct resource *region = NULL; 1191 u32 reg; 1192 int i; 1193 1194 /* Only do that on PowerMac */ 1195 if (!machine_is(powermac)) 1196 return; 1197 1198 /* Find the largest MMIO region */ 1199 for (i = 0; i < 3; i++) { 1200 struct resource *r = &host->mem_resources[i]; 1201 if (!(r->flags & IORESOURCE_MEM)) 1202 continue; 1203 /* Skip the 0xf0xxxxxx..f2xxxxxx regions, we know they 1204 * are reserved by HW for other things 1205 */ 1206 if (r->start >= 0xf0000000 && r->start < 0xf3000000) 1207 continue; 1208 if (!region || resource_size(r) > resource_size(region)) 1209 region = r; 1210 } 1211 /* Nothing found, bail */ 1212 if (region == 0) 1213 return; 1214 1215 /* Print things out */ 1216 printk(KERN_INFO "PCI: Fixup U4 PCIe bridge range: %pR\n", region); 1217 1218 /* Fixup bridge config space. We know it's a Mac, resource aren't 1219 * offset so let's just blast them as-is. We also know that they 1220 * fit in 32 bits 1221 */ 1222 reg = ((region->start >> 16) & 0xfff0) | (region->end & 0xfff00000); 1223 pci_write_config_dword(dev, PCI_MEMORY_BASE, reg); 1224 pci_write_config_dword(dev, PCI_PREF_BASE_UPPER32, 0); 1225 pci_write_config_dword(dev, PCI_PREF_LIMIT_UPPER32, 0); 1226 pci_write_config_dword(dev, PCI_PREF_MEMORY_BASE, 0); 1227} 1228DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_U4_PCIE, fixup_u4_pcie); 1229 1230#ifdef CONFIG_PPC64 1231static int pmac_pci_probe_mode(struct pci_bus *bus) 1232{ 1233 struct device_node *node = pci_bus_to_OF_node(bus); 1234 1235 /* We need to use normal PCI probing for the AGP bus, 1236 * since the device for the AGP bridge isn't in the tree. 1237 * Same for the PCIe host on U4 and the HT host bridge. 1238 */ 1239 if (bus->self == NULL && (of_device_is_compatible(node, "u3-agp") || 1240 of_device_is_compatible(node, "u4-pcie") || 1241 of_device_is_compatible(node, "u3-ht"))) 1242 return PCI_PROBE_NORMAL; 1243 return PCI_PROBE_DEVTREE; 1244} 1245#endif /* CONFIG_PPC64 */ 1246 1247struct pci_controller_ops pmac_pci_controller_ops = { 1248#ifdef CONFIG_PPC64 1249 .probe_mode = pmac_pci_probe_mode, 1250#endif 1251#ifdef CONFIG_PPC32 1252 .enable_device_hook = pmac_pci_enable_device_hook, 1253#endif 1254}; 1255 1256