1/*
2 *  This file contains the power_save function for 6xx & 7xxx CPUs
3 *  rewritten in assembler
4 *
5 *  Warning ! This code assumes that if your machine has a 750fx
6 *  it will have PLL 1 set to low speed mode (used during NAP/DOZE).
7 *  if this is not the case some additional changes will have to
8 *  be done to check a runtime var (a bit like powersave-nap)
9 *
10 *  This program is free software; you can redistribute it and/or
11 *  modify it under the terms of the GNU General Public License
12 *  as published by the Free Software Foundation; either version
13 *  2 of the License, or (at your option) any later version.
14 */
15
16#include <linux/threads.h>
17#include <asm/reg.h>
18#include <asm/page.h>
19#include <asm/cputable.h>
20#include <asm/thread_info.h>
21#include <asm/ppc_asm.h>
22#include <asm/asm-offsets.h>
23
24	.text
25
26/*
27 * Init idle, called at early CPU setup time from head.S for each CPU
28 * Make sure no rest of NAP mode remains in HID0, save default
29 * values for some CPU specific registers. Called with r24
30 * containing CPU number and r3 reloc offset
31 */
32_GLOBAL(init_idle_6xx)
33BEGIN_FTR_SECTION
34	mfspr	r4,SPRN_HID0
35	rlwinm	r4,r4,0,10,8	/* Clear NAP */
36	mtspr	SPRN_HID0, r4
37	b	1f
38END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
39	blr
401:
41	slwi	r5,r24,2
42	add	r5,r5,r3
43BEGIN_FTR_SECTION
44	mfspr	r4,SPRN_MSSCR0
45	addis	r6,r5, nap_save_msscr0@ha
46	stw	r4,nap_save_msscr0@l(r6)
47END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR)
48BEGIN_FTR_SECTION
49	mfspr	r4,SPRN_HID1
50	addis	r6,r5,nap_save_hid1@ha
51	stw	r4,nap_save_hid1@l(r6)
52END_FTR_SECTION_IFSET(CPU_FTR_DUAL_PLL_750FX)
53	blr
54
55/*
56 * Here is the power_save_6xx function. This could eventually be
57 * split into several functions & changing the function pointer
58 * depending on the various features.
59 */
60_GLOBAL(ppc6xx_idle)
61	/* Check if we can nap or doze, put HID0 mask in r3
62	 */
63	lis	r3, 0
64BEGIN_FTR_SECTION
65	lis	r3,HID0_DOZE@h
66END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
67BEGIN_FTR_SECTION
68	/* We must dynamically check for the NAP feature as it
69	 * can be cleared by CPU init after the fixups are done
70	 */
71	lis	r4,cur_cpu_spec@ha
72	lwz	r4,cur_cpu_spec@l(r4)
73	lwz	r4,CPU_SPEC_FEATURES(r4)
74	andi.	r0,r4,CPU_FTR_CAN_NAP
75	beq	1f
76	/* Now check if user or arch enabled NAP mode */
77	lis	r4,powersave_nap@ha
78	lwz	r4,powersave_nap@l(r4)
79	cmpwi	0,r4,0
80	beq	1f
81	lis	r3,HID0_NAP@h
821:
83END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
84	cmpwi	0,r3,0
85	beqlr
86
87	/* Some pre-nap cleanups needed on some CPUs */
88	andis.	r0,r3,HID0_NAP@h
89	beq	2f
90BEGIN_FTR_SECTION
91	/* Disable L2 prefetch on some 745x and try to ensure
92	 * L2 prefetch engines are idle. As explained by errata
93	 * text, we can't be sure they are, we just hope very hard
94	 * that well be enough (sic !). At least I noticed Apple
95	 * doesn't even bother doing the dcbf's here...
96	 */
97	mfspr	r4,SPRN_MSSCR0
98	rlwinm	r4,r4,0,0,29
99	sync
100	mtspr	SPRN_MSSCR0,r4
101	sync
102	isync
103	lis	r4,KERNELBASE@h
104	dcbf	0,r4
105	dcbf	0,r4
106	dcbf	0,r4
107	dcbf	0,r4
108END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR)
1092:
110BEGIN_FTR_SECTION
111	/* Go to low speed mode on some 750FX */
112	lis	r4,powersave_lowspeed@ha
113	lwz	r4,powersave_lowspeed@l(r4)
114	cmpwi	0,r4,0
115	beq	1f
116	mfspr	r4,SPRN_HID1
117	oris	r4,r4,0x0001
118	mtspr	SPRN_HID1,r4
1191:
120END_FTR_SECTION_IFSET(CPU_FTR_DUAL_PLL_750FX)
121
122	/* Go to NAP or DOZE now */
123	mfspr	r4,SPRN_HID0
124	lis	r5,(HID0_NAP|HID0_SLEEP)@h
125BEGIN_FTR_SECTION
126	oris	r5,r5,HID0_DOZE@h
127END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
128	andc	r4,r4,r5
129	or	r4,r4,r3
130BEGIN_FTR_SECTION
131	oris	r4,r4,HID0_DPM@h	/* that should be done once for all  */
132END_FTR_SECTION_IFCLR(CPU_FTR_NO_DPM)
133	mtspr	SPRN_HID0,r4
134BEGIN_FTR_SECTION
135	DSSALL
136	sync
137END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
138	CURRENT_THREAD_INFO(r9, r1)
139	lwz	r8,TI_LOCAL_FLAGS(r9)	/* set napping bit */
140	ori	r8,r8,_TLF_NAPPING	/* so when we take an exception */
141	stw	r8,TI_LOCAL_FLAGS(r9)	/* it will return to our caller */
142	mfmsr	r7
143	ori	r7,r7,MSR_EE
144	oris	r7,r7,MSR_POW@h
1451:	sync
146	mtmsr	r7
147	isync
148	b	1b
149
150/*
151 * Return from NAP/DOZE mode, restore some CPU specific registers,
152 * we are called with DR/IR still off and r2 containing physical
153 * address of current.  R11 points to the exception frame (physical
154 * address).  We have to preserve r10.
155 */
156_GLOBAL(power_save_ppc32_restore)
157	lwz	r9,_LINK(r11)		/* interrupted in ppc6xx_idle: */
158	stw	r9,_NIP(r11)		/* make it do a blr */
159
160#ifdef CONFIG_SMP
161	CURRENT_THREAD_INFO(r12, r11)
162	lwz	r11,TI_CPU(r12)		/* get cpu number * 4 */
163	slwi	r11,r11,2
164#else
165	li	r11,0
166#endif
167	/* Todo make sure all these are in the same page
168	 * and load r11 (@ha part + CPU offset) only once
169	 */
170BEGIN_FTR_SECTION
171	mfspr	r9,SPRN_HID0
172	andis.	r9,r9,HID0_NAP@h
173	beq	1f
174	addis	r9,r11,(nap_save_msscr0-KERNELBASE)@ha
175	lwz	r9,nap_save_msscr0@l(r9)
176	mtspr	SPRN_MSSCR0, r9
177	sync
178	isync
1791:
180END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR)
181BEGIN_FTR_SECTION
182	addis	r9,r11,(nap_save_hid1-KERNELBASE)@ha
183	lwz	r9,nap_save_hid1@l(r9)
184	mtspr	SPRN_HID1, r9
185END_FTR_SECTION_IFSET(CPU_FTR_DUAL_PLL_750FX)
186	b	transfer_to_handler_cont
187
188	.data
189
190_GLOBAL(nap_save_msscr0)
191	.space	4*NR_CPUS
192
193_GLOBAL(nap_save_hid1)
194	.space	4*NR_CPUS
195
196_GLOBAL(powersave_lowspeed)
197	.long	0
198