1/* 2 * Copyright (C) 2008 Extreme Engineering Solutions, Inc. 3 * Based on MPC8572DS device tree from Freescale Semiconductor, Inc. 4 * 5 * XPedite5301 PMC/XMC module based on MPC8572E 6 * 7 * This is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License version 2 as 9 * published by the Free Software Foundation. 10 */ 11 12/dts-v1/; 13/ { 14 model = "xes,xpedite5301"; 15 compatible = "xes,xpedite5301", "xes,MPC8572"; 16 #address-cells = <2>; 17 #size-cells = <2>; 18 form-factor = "PMC/XMC"; 19 boot-bank = <0x0>; /* 0: Primary flash, 1: Secondary flash */ 20 21 aliases { 22 ethernet0 = &enet0; 23 ethernet1 = &enet1; 24 serial0 = &serial0; 25 serial1 = &serial1; 26 pci1 = &pci1; 27 pci2 = &pci2; 28 }; 29 30 cpus { 31 #address-cells = <1>; 32 #size-cells = <0>; 33 34 PowerPC,8572@0 { 35 device_type = "cpu"; 36 reg = <0x0>; 37 d-cache-line-size = <32>; // 32 bytes 38 i-cache-line-size = <32>; // 32 bytes 39 d-cache-size = <0x8000>; // L1, 32K 40 i-cache-size = <0x8000>; // L1, 32K 41 timebase-frequency = <0>; 42 bus-frequency = <0>; 43 clock-frequency = <0>; 44 next-level-cache = <&L2>; 45 }; 46 47 PowerPC,8572@1 { 48 device_type = "cpu"; 49 reg = <0x1>; 50 d-cache-line-size = <32>; // 32 bytes 51 i-cache-line-size = <32>; // 32 bytes 52 d-cache-size = <0x8000>; // L1, 32K 53 i-cache-size = <0x8000>; // L1, 32K 54 timebase-frequency = <0>; 55 bus-frequency = <0>; 56 clock-frequency = <0>; 57 next-level-cache = <&L2>; 58 }; 59 }; 60 61 memory { 62 device_type = "memory"; 63 reg = <0x0 0x0 0x0 0x0>; // Filled in by U-Boot 64 }; 65 66 localbus@ef005000 { 67 #address-cells = <2>; 68 #size-cells = <1>; 69 compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus"; 70 reg = <0 0xef005000 0 0x1000>; 71 interrupts = <19 2>; 72 interrupt-parent = <&mpic>; 73 /* Local bus region mappings */ 74 ranges = <0 0 0 0xf8000000 0x8000000 /* CS0: Boot flash */ 75 1 0 0 0xf0000000 0x8000000 /* CS1: Alternate flash */ 76 2 0 0 0xef800000 0x40000 /* CS2: NAND CE1 */ 77 3 0 0 0xef840000 0x40000>; /* CS3: NAND CE2 */ 78 79 nor-boot@0,0 { 80 compatible = "amd,s29gl01gp", "cfi-flash"; 81 bank-width = <2>; 82 reg = <0 0 0x8000000>; /* 128MB */ 83 #address-cells = <1>; 84 #size-cells = <1>; 85 partition@0 { 86 label = "Primary user space"; 87 reg = <0x00000000 0x6f00000>; /* 111 MB */ 88 }; 89 partition@6f00000 { 90 label = "Primary kernel"; 91 reg = <0x6f00000 0x1000000>; /* 16 MB */ 92 }; 93 partition@7f00000 { 94 label = "Primary DTB"; 95 reg = <0x7f00000 0x40000>; /* 256 KB */ 96 }; 97 partition@7f40000 { 98 label = "Primary U-Boot environment"; 99 reg = <0x7f40000 0x40000>; /* 256 KB */ 100 }; 101 partition@7f80000 { 102 label = "Primary U-Boot"; 103 reg = <0x7f80000 0x80000>; /* 512 KB */ 104 read-only; 105 }; 106 }; 107 108 nor-alternate@1,0 { 109 compatible = "amd,s29gl01gp", "cfi-flash"; 110 bank-width = <2>; 111 //reg = <0xf0000000 0x08000000>; /* 128MB */ 112 reg = <1 0 0x8000000>; /* 128MB */ 113 #address-cells = <1>; 114 #size-cells = <1>; 115 partition@0 { 116 label = "Secondary user space"; 117 reg = <0x00000000 0x6f00000>; /* 111 MB */ 118 }; 119 partition@6f00000 { 120 label = "Secondary kernel"; 121 reg = <0x6f00000 0x1000000>; /* 16 MB */ 122 }; 123 partition@7f00000 { 124 label = "Secondary DTB"; 125 reg = <0x7f00000 0x40000>; /* 256 KB */ 126 }; 127 partition@7f40000 { 128 label = "Secondary U-Boot environment"; 129 reg = <0x7f40000 0x40000>; /* 256 KB */ 130 }; 131 partition@7f80000 { 132 label = "Secondary U-Boot"; 133 reg = <0x7f80000 0x80000>; /* 512 KB */ 134 read-only; 135 }; 136 }; 137 138 nand@2,0 { 139 #address-cells = <1>; 140 #size-cells = <1>; 141 /* 142 * Actual part could be ST Micro NAND08GW3B2A (1 GB), 143 * Micron MT29F8G08DAA (2x 512 MB), or Micron 144 * MT29F16G08FAA (2x 1 GB), depending on the build 145 * configuration 146 */ 147 compatible = "fsl,mpc8572-fcm-nand", 148 "fsl,elbc-fcm-nand"; 149 reg = <2 0 0x40000>; 150 /* U-Boot should fix this up if chip size > 1 GB */ 151 partition@0 { 152 label = "NAND Filesystem"; 153 reg = <0 0x40000000>; 154 }; 155 }; 156 157 }; 158 159 soc8572@ef000000 { 160 #address-cells = <1>; 161 #size-cells = <1>; 162 device_type = "soc"; 163 compatible = "fsl,mpc8572-immr", "simple-bus"; 164 ranges = <0x0 0 0xef000000 0x100000>; 165 bus-frequency = <0>; // Filled out by uboot. 166 167 ecm-law@0 { 168 compatible = "fsl,ecm-law"; 169 reg = <0x0 0x1000>; 170 fsl,num-laws = <12>; 171 }; 172 173 ecm@1000 { 174 compatible = "fsl,mpc8572-ecm", "fsl,ecm"; 175 reg = <0x1000 0x1000>; 176 interrupts = <17 2>; 177 interrupt-parent = <&mpic>; 178 }; 179 180 memory-controller@2000 { 181 compatible = "fsl,mpc8572-memory-controller"; 182 reg = <0x2000 0x1000>; 183 interrupt-parent = <&mpic>; 184 interrupts = <18 2>; 185 }; 186 187 memory-controller@6000 { 188 compatible = "fsl,mpc8572-memory-controller"; 189 reg = <0x6000 0x1000>; 190 interrupt-parent = <&mpic>; 191 interrupts = <18 2>; 192 }; 193 194 L2: l2-cache-controller@20000 { 195 compatible = "fsl,mpc8572-l2-cache-controller"; 196 reg = <0x20000 0x1000>; 197 cache-line-size = <32>; // 32 bytes 198 cache-size = <0x100000>; // L2, 1M 199 interrupt-parent = <&mpic>; 200 interrupts = <16 2>; 201 }; 202 203 i2c@3000 { 204 #address-cells = <1>; 205 #size-cells = <0>; 206 cell-index = <0>; 207 compatible = "fsl-i2c"; 208 reg = <0x3000 0x100>; 209 interrupts = <43 2>; 210 interrupt-parent = <&mpic>; 211 dfsrr; 212 213 temp-sensor@48 { 214 compatible = "dallas,ds1631", "dallas,ds1621"; 215 reg = <0x48>; 216 }; 217 218 temp-sensor@4c { 219 compatible = "adi,adt7461"; 220 reg = <0x4c>; 221 }; 222 223 cpu-supervisor@51 { 224 compatible = "dallas,ds4510"; 225 reg = <0x51>; 226 }; 227 228 eeprom@54 { 229 compatible = "atmel,at24c128b"; 230 reg = <0x54>; 231 }; 232 233 rtc@68 { 234 compatible = "stm,m41t00", 235 "dallas,ds1338"; 236 reg = <0x68>; 237 }; 238 239 pcie-switch@70 { 240 compatible = "plx,pex8518"; 241 reg = <0x70>; 242 }; 243 244 gpio1: gpio@18 { 245 compatible = "nxp,pca9557"; 246 reg = <0x18>; 247 #gpio-cells = <2>; 248 gpio-controller; 249 polarity = <0x00>; 250 }; 251 252 gpio2: gpio@1c { 253 compatible = "nxp,pca9557"; 254 reg = <0x1c>; 255 #gpio-cells = <2>; 256 gpio-controller; 257 polarity = <0x00>; 258 }; 259 260 gpio3: gpio@1e { 261 compatible = "nxp,pca9557"; 262 reg = <0x1e>; 263 #gpio-cells = <2>; 264 gpio-controller; 265 polarity = <0x00>; 266 }; 267 268 gpio4: gpio@1f { 269 compatible = "nxp,pca9557"; 270 reg = <0x1f>; 271 #gpio-cells = <2>; 272 gpio-controller; 273 polarity = <0x00>; 274 }; 275 }; 276 277 i2c@3100 { 278 #address-cells = <1>; 279 #size-cells = <0>; 280 cell-index = <1>; 281 compatible = "fsl-i2c"; 282 reg = <0x3100 0x100>; 283 interrupts = <43 2>; 284 interrupt-parent = <&mpic>; 285 dfsrr; 286 }; 287 288 dma@c300 { 289 #address-cells = <1>; 290 #size-cells = <1>; 291 compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma"; 292 reg = <0xc300 0x4>; 293 ranges = <0x0 0xc100 0x200>; 294 cell-index = <1>; 295 dma-channel@0 { 296 compatible = "fsl,mpc8572-dma-channel", 297 "fsl,eloplus-dma-channel"; 298 reg = <0x0 0x80>; 299 cell-index = <0>; 300 interrupt-parent = <&mpic>; 301 interrupts = <76 2>; 302 }; 303 dma-channel@80 { 304 compatible = "fsl,mpc8572-dma-channel", 305 "fsl,eloplus-dma-channel"; 306 reg = <0x80 0x80>; 307 cell-index = <1>; 308 interrupt-parent = <&mpic>; 309 interrupts = <77 2>; 310 }; 311 dma-channel@100 { 312 compatible = "fsl,mpc8572-dma-channel", 313 "fsl,eloplus-dma-channel"; 314 reg = <0x100 0x80>; 315 cell-index = <2>; 316 interrupt-parent = <&mpic>; 317 interrupts = <78 2>; 318 }; 319 dma-channel@180 { 320 compatible = "fsl,mpc8572-dma-channel", 321 "fsl,eloplus-dma-channel"; 322 reg = <0x180 0x80>; 323 cell-index = <3>; 324 interrupt-parent = <&mpic>; 325 interrupts = <79 2>; 326 }; 327 }; 328 329 dma@21300 { 330 #address-cells = <1>; 331 #size-cells = <1>; 332 compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma"; 333 reg = <0x21300 0x4>; 334 ranges = <0x0 0x21100 0x200>; 335 cell-index = <0>; 336 dma-channel@0 { 337 compatible = "fsl,mpc8572-dma-channel", 338 "fsl,eloplus-dma-channel"; 339 reg = <0x0 0x80>; 340 cell-index = <0>; 341 interrupt-parent = <&mpic>; 342 interrupts = <20 2>; 343 }; 344 dma-channel@80 { 345 compatible = "fsl,mpc8572-dma-channel", 346 "fsl,eloplus-dma-channel"; 347 reg = <0x80 0x80>; 348 cell-index = <1>; 349 interrupt-parent = <&mpic>; 350 interrupts = <21 2>; 351 }; 352 dma-channel@100 { 353 compatible = "fsl,mpc8572-dma-channel", 354 "fsl,eloplus-dma-channel"; 355 reg = <0x100 0x80>; 356 cell-index = <2>; 357 interrupt-parent = <&mpic>; 358 interrupts = <22 2>; 359 }; 360 dma-channel@180 { 361 compatible = "fsl,mpc8572-dma-channel", 362 "fsl,eloplus-dma-channel"; 363 reg = <0x180 0x80>; 364 cell-index = <3>; 365 interrupt-parent = <&mpic>; 366 interrupts = <23 2>; 367 }; 368 }; 369 370 /* eTSEC 1 */ 371 enet0: ethernet@24000 { 372 #address-cells = <1>; 373 #size-cells = <1>; 374 cell-index = <0>; 375 device_type = "network"; 376 model = "eTSEC"; 377 compatible = "gianfar"; 378 reg = <0x24000 0x1000>; 379 ranges = <0x0 0x24000 0x1000>; 380 local-mac-address = [ 00 00 00 00 00 00 ]; 381 interrupts = <29 2 30 2 34 2>; 382 interrupt-parent = <&mpic>; 383 tbi-handle = <&tbi0>; 384 phy-handle = <&phy0>; 385 phy-connection-type = "sgmii"; 386 387 mdio@520 { 388 #address-cells = <1>; 389 #size-cells = <0>; 390 compatible = "fsl,gianfar-mdio"; 391 reg = <0x520 0x20>; 392 393 phy0: ethernet-phy@1 { 394 interrupt-parent = <&mpic>; 395 interrupts = <8 1>; 396 reg = <0x1>; 397 }; 398 phy1: ethernet-phy@2 { 399 interrupt-parent = <&mpic>; 400 interrupts = <8 1>; 401 reg = <0x2>; 402 }; 403 tbi0: tbi-phy@11 { 404 reg = <0x11>; 405 device_type = "tbi-phy"; 406 }; 407 }; 408 }; 409 410 /* eTSEC 2 */ 411 enet1: ethernet@25000 { 412 #address-cells = <1>; 413 #size-cells = <1>; 414 cell-index = <1>; 415 device_type = "network"; 416 model = "eTSEC"; 417 compatible = "gianfar"; 418 reg = <0x25000 0x1000>; 419 ranges = <0x0 0x25000 0x1000>; 420 local-mac-address = [ 00 00 00 00 00 00 ]; 421 interrupts = <35 2 36 2 40 2>; 422 interrupt-parent = <&mpic>; 423 tbi-handle = <&tbi1>; 424 phy-handle = <&phy1>; 425 phy-connection-type = "sgmii"; 426 427 mdio@520 { 428 #address-cells = <1>; 429 #size-cells = <0>; 430 compatible = "fsl,gianfar-tbi"; 431 reg = <0x520 0x20>; 432 433 tbi1: tbi-phy@11 { 434 reg = <0x11>; 435 device_type = "tbi-phy"; 436 }; 437 }; 438 }; 439 440 /* UART0 */ 441 serial0: serial@4500 { 442 cell-index = <0>; 443 device_type = "serial"; 444 compatible = "fsl,ns16550", "ns16550"; 445 reg = <0x4500 0x100>; 446 clock-frequency = <0>; 447 interrupts = <42 2>; 448 interrupt-parent = <&mpic>; 449 }; 450 451 /* UART1 */ 452 serial1: serial@4600 { 453 cell-index = <1>; 454 device_type = "serial"; 455 compatible = "fsl,ns16550", "ns16550"; 456 reg = <0x4600 0x100>; 457 clock-frequency = <0>; 458 interrupts = <42 2>; 459 interrupt-parent = <&mpic>; 460 }; 461 462 global-utilities@e0000 { //global utilities block 463 compatible = "fsl,mpc8572-guts"; 464 reg = <0xe0000 0x1000>; 465 fsl,has-rstcr; 466 }; 467 468 msi@41600 { 469 compatible = "fsl,mpc8572-msi", "fsl,mpic-msi"; 470 reg = <0x41600 0x80>; 471 msi-available-ranges = <0 0x100>; 472 interrupts = < 473 0xe0 0 474 0xe1 0 475 0xe2 0 476 0xe3 0 477 0xe4 0 478 0xe5 0 479 0xe6 0 480 0xe7 0>; 481 interrupt-parent = <&mpic>; 482 }; 483 484 crypto@30000 { 485 compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", 486 "fsl,sec2.1", "fsl,sec2.0"; 487 reg = <0x30000 0x10000>; 488 interrupts = <45 2 58 2>; 489 interrupt-parent = <&mpic>; 490 fsl,num-channels = <4>; 491 fsl,channel-fifo-len = <24>; 492 fsl,exec-units-mask = <0x9fe>; 493 fsl,descriptor-types-mask = <0x3ab0ebf>; 494 }; 495 496 mpic: pic@40000 { 497 interrupt-controller; 498 #address-cells = <0>; 499 #interrupt-cells = <2>; 500 reg = <0x40000 0x40000>; 501 compatible = "chrp,open-pic"; 502 device_type = "open-pic"; 503 }; 504 505 gpio0: gpio@f000 { 506 compatible = "fsl,mpc8572-gpio"; 507 reg = <0xf000 0x1000>; 508 interrupts = <47 2>; 509 interrupt-parent = <&mpic>; 510 #gpio-cells = <2>; 511 gpio-controller; 512 }; 513 514 gpio-leds { 515 compatible = "gpio-leds"; 516 517 heartbeat { 518 label = "Heartbeat"; 519 gpios = <&gpio0 4 1>; 520 linux,default-trigger = "heartbeat"; 521 }; 522 523 yellow { 524 label = "Yellow"; 525 gpios = <&gpio0 5 1>; 526 }; 527 528 red { 529 label = "Red"; 530 gpios = <&gpio0 6 1>; 531 }; 532 533 green { 534 label = "Green"; 535 gpios = <&gpio0 7 1>; 536 }; 537 }; 538 539 /* PME (pattern-matcher) */ 540 pme@10000 { 541 compatible = "fsl,mpc8572-pme", "pme8572"; 542 reg = <0x10000 0x5000>; 543 interrupts = <57 2 64 2 65 2 66 2 67 2>; 544 interrupt-parent = <&mpic>; 545 }; 546 547 tlu@2f000 { 548 compatible = "fsl,mpc8572-tlu", "fsl_tlu"; 549 reg = <0x2f000 0x1000>; 550 interrupts = <61 2>; 551 interrupt-parent = <&mpic>; 552 }; 553 554 tlu@15000 { 555 compatible = "fsl,mpc8572-tlu", "fsl_tlu"; 556 reg = <0x15000 0x1000>; 557 interrupts = <75 2>; 558 interrupt-parent = <&mpic>; 559 }; 560 }; 561 562 /* 563 * PCI Express controller 3 @ ef008000 is not used. 564 * This would have been pci0 on other mpc85xx platforms. 565 */ 566 567 /* PCI Express controller 2, wired to XMC P15 connector */ 568 pci1: pcie@ef009000 { 569 compatible = "fsl,mpc8548-pcie"; 570 device_type = "pci"; 571 #interrupt-cells = <1>; 572 #size-cells = <2>; 573 #address-cells = <3>; 574 reg = <0 0xef009000 0 0x1000>; 575 bus-range = <0 255>; 576 ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x10000000 577 0x1000000 0x0 0x00000000 0 0xe8800000 0x0 0x00010000>; 578 clock-frequency = <33333333>; 579 interrupt-parent = <&mpic>; 580 interrupts = <25 2>; 581 interrupt-map-mask = <0xf800 0x0 0x0 0x7>; 582 interrupt-map = < 583 /* IDSEL 0x0 */ 584 0x0 0x0 0x0 0x1 &mpic 0x4 0x1 585 0x0 0x0 0x0 0x2 &mpic 0x5 0x1 586 0x0 0x0 0x0 0x3 &mpic 0x6 0x1 587 0x0 0x0 0x0 0x4 &mpic 0x7 0x1 588 >; 589 pcie@0 { 590 reg = <0x00000000 0x00000000 0x00000000 0x00000000 0x00000000>; 591 #size-cells = <2>; 592 #address-cells = <3>; 593 device_type = "pci"; 594 ranges = <0x2000000 0x0 0xc0000000 595 0x2000000 0x0 0xc0000000 596 0x0 0x10000000 597 598 0x1000000 0x0 0x0 599 0x1000000 0x0 0x0 600 0x0 0x100000>; 601 }; 602 }; 603 604 /* PCI Express controller 1, wired to PEX8112 for PMC interface */ 605 pci2: pcie@ef00a000 { 606 compatible = "fsl,mpc8548-pcie"; 607 device_type = "pci"; 608 #interrupt-cells = <1>; 609 #size-cells = <2>; 610 #address-cells = <3>; 611 reg = <0 0xef00a000 0 0x1000>; 612 bus-range = <0 255>; 613 ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x40000000 614 0x1000000 0x0 0x00000000 0 0xe8000000 0x0 0x10000>; 615 clock-frequency = <33333333>; 616 interrupt-parent = <&mpic>; 617 interrupts = <26 2>; 618 interrupt-map-mask = <0xf800 0x0 0x0 0x7>; 619 interrupt-map = < 620 /* IDSEL 0x0 */ 621 0x0 0x0 0x0 0x1 &mpic 0x0 0x1 622 0x0 0x0 0x0 0x2 &mpic 0x1 0x1 623 0x0 0x0 0x0 0x3 &mpic 0x2 0x1 624 0x0 0x0 0x0 0x4 &mpic 0x3 0x1 625 >; 626 pcie@0 { 627 reg = <0x0 0x0 0x0 0x0 0x0>; 628 #size-cells = <2>; 629 #address-cells = <3>; 630 device_type = "pci"; 631 ranges = <0x2000000 0x0 0x80000000 632 0x2000000 0x0 0x80000000 633 0x0 0x40000000 634 635 0x1000000 0x0 0x0 636 0x1000000 0x0 0x0 637 0x0 0x100000>; 638 }; 639 }; 640}; 641