1/*
2 * MPC8548 CDS Device Tree Source (36-bit address map)
3 *
4 * Copyright 2012 Freescale Semiconductor Inc.
5 *
6 * This program is free software; you can redistribute  it and/or modify it
7 * under  the terms of  the GNU General  Public License as published by the
8 * Free Software Foundation;  either version 2 of the  License, or (at your
9 * option) any later version.
10 */
11
12/include/ "fsl/mpc8548si-pre.dtsi"
13
14/ {
15	model = "MPC8548CDS";
16	compatible = "MPC8548CDS", "MPC85xxCDS";
17
18	memory {
19		device_type = "memory";
20		reg = <0 0 0x0 0x8000000>;	// 128M at 0x0
21	};
22
23	board_lbc: lbc: localbus@fe0005000 {
24		reg = <0xf 0xe0005000 0 0x1000>;
25
26		ranges = <0x0 0x0 0xf 0xff000000 0x01000000
27			  0x1 0x0 0xf 0xf8004000 0x00001000>;
28
29	};
30
31	board_soc: soc: soc8548@fe0000000 {
32		ranges = <0 0xf 0xe0000000 0x100000>;
33	};
34
35	board_pci0: pci0: pci@fe0008000 {
36		reg = <0xf 0xe0008000 0 0x1000>;
37		ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x10000000
38			  0x1000000 0x0 0x00000000 0xf 0xe2000000 0x0 0x800000>;
39		clock-frequency = <66666666>;
40	};
41
42	pci1: pci@fe0009000 {
43		reg = <0xf 0xe0009000 0 0x1000>;
44		ranges = <0x2000000 0x0 0xe0000000 0xc 0x10000000 0x0 0x10000000
45			  0x1000000 0x0 0x00000000 0xf 0xe2800000 0x0 0x800000>;
46		clock-frequency = <66666666>;
47		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
48		interrupt-map = <
49
50			/* IDSEL 0x15 */
51			0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 0 0
52			0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
53			0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
54			0xa800 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
55	};
56
57	pci2: pcie@fe000a000 {
58		reg = <0xf 0xe000a000 0 0x1000>;
59		ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
60			  0x1000000 0x0 0x00000000 0xf 0xe3000000 0x0 0x100000>;
61		pcie@0 {
62			ranges = <0x2000000 0x0 0xa0000000
63				  0x2000000 0x0 0xa0000000
64				  0x0 0x20000000
65
66				  0x1000000 0x0 0x0
67				  0x1000000 0x0 0x0
68				  0x0 0x100000>;
69		};
70	};
71
72	rio: rapidio@fe00c0000 {
73		reg = <0xf 0xe00c0000 0x0 0x20000>;
74		port1 {
75			ranges = <0x0 0x0 0xc 0x40000000 0x0 0x20000000>;
76		};
77	};
78};
79
80/*
81 * mpc8548cds.dtsi must be last to ensure board_pci0 overrides pci0 settings
82 * for interrupt-map & interrupt-map-mask.
83 */
84
85/include/ "fsl/mpc8548si-post.dtsi"
86/include/ "mpc8548cds.dtsi"
87