1/*
2 * MPC8541 CDS Device Tree Source
3 *
4 * Copyright 2006, 2008 Freescale Semiconductor Inc.
5 *
6 * This program is free software; you can redistribute  it and/or modify it
7 * under  the terms of  the GNU General  Public License as published by the
8 * Free Software Foundation;  either version 2 of the  License, or (at your
9 * option) any later version.
10 */
11
12/dts-v1/;
13
14/include/ "fsl/e500v2_power_isa.dtsi"
15
16/ {
17	model = "MPC8541CDS";
18	compatible = "MPC8541CDS", "MPC85xxCDS";
19	#address-cells = <1>;
20	#size-cells = <1>;
21
22	aliases {
23		ethernet0 = &enet0;
24		ethernet1 = &enet1;
25		serial0 = &serial0;
26		serial1 = &serial1;
27		pci0 = &pci0;
28		pci1 = &pci1;
29	};
30
31	cpus {
32		#address-cells = <1>;
33		#size-cells = <0>;
34
35		PowerPC,8541@0 {
36			device_type = "cpu";
37			reg = <0x0>;
38			d-cache-line-size = <32>;	// 32 bytes
39			i-cache-line-size = <32>;	// 32 bytes
40			d-cache-size = <0x8000>;		// L1, 32K
41			i-cache-size = <0x8000>;		// L1, 32K
42			timebase-frequency = <0>;	//  33 MHz, from uboot
43			bus-frequency = <0>;	// 166 MHz
44			clock-frequency = <0>;	// 825 MHz, from uboot
45			next-level-cache = <&L2>;
46		};
47	};
48
49	memory {
50		device_type = "memory";
51		reg = <0x0 0x8000000>;	// 128M at 0x0
52	};
53
54	soc8541@e0000000 {
55		#address-cells = <1>;
56		#size-cells = <1>;
57		device_type = "soc";
58		compatible = "simple-bus";
59		ranges = <0x0 0xe0000000 0x100000>;
60		bus-frequency = <0>;
61
62		ecm-law@0 {
63			compatible = "fsl,ecm-law";
64			reg = <0x0 0x1000>;
65			fsl,num-laws = <8>;
66		};
67
68		ecm@1000 {
69			compatible = "fsl,mpc8541-ecm", "fsl,ecm";
70			reg = <0x1000 0x1000>;
71			interrupts = <17 2>;
72			interrupt-parent = <&mpic>;
73		};
74
75		memory-controller@2000 {
76			compatible = "fsl,mpc8541-memory-controller";
77			reg = <0x2000 0x1000>;
78			interrupt-parent = <&mpic>;
79			interrupts = <18 2>;
80		};
81
82		L2: l2-cache-controller@20000 {
83			compatible = "fsl,mpc8541-l2-cache-controller";
84			reg = <0x20000 0x1000>;
85			cache-line-size = <32>;	// 32 bytes
86			cache-size = <0x40000>;	// L2, 256K
87			interrupt-parent = <&mpic>;
88			interrupts = <16 2>;
89		};
90
91		i2c@3000 {
92			#address-cells = <1>;
93			#size-cells = <0>;
94			cell-index = <0>;
95			compatible = "fsl-i2c";
96			reg = <0x3000 0x100>;
97			interrupts = <43 2>;
98			interrupt-parent = <&mpic>;
99			dfsrr;
100		};
101
102		dma@21300 {
103			#address-cells = <1>;
104			#size-cells = <1>;
105			compatible = "fsl,mpc8541-dma", "fsl,eloplus-dma";
106			reg = <0x21300 0x4>;
107			ranges = <0x0 0x21100 0x200>;
108			cell-index = <0>;
109			dma-channel@0 {
110				compatible = "fsl,mpc8541-dma-channel",
111						"fsl,eloplus-dma-channel";
112				reg = <0x0 0x80>;
113				cell-index = <0>;
114				interrupt-parent = <&mpic>;
115				interrupts = <20 2>;
116			};
117			dma-channel@80 {
118				compatible = "fsl,mpc8541-dma-channel",
119						"fsl,eloplus-dma-channel";
120				reg = <0x80 0x80>;
121				cell-index = <1>;
122				interrupt-parent = <&mpic>;
123				interrupts = <21 2>;
124			};
125			dma-channel@100 {
126				compatible = "fsl,mpc8541-dma-channel",
127						"fsl,eloplus-dma-channel";
128				reg = <0x100 0x80>;
129				cell-index = <2>;
130				interrupt-parent = <&mpic>;
131				interrupts = <22 2>;
132			};
133			dma-channel@180 {
134				compatible = "fsl,mpc8541-dma-channel",
135						"fsl,eloplus-dma-channel";
136				reg = <0x180 0x80>;
137				cell-index = <3>;
138				interrupt-parent = <&mpic>;
139				interrupts = <23 2>;
140			};
141		};
142
143		enet0: ethernet@24000 {
144			#address-cells = <1>;
145			#size-cells = <1>;
146			cell-index = <0>;
147			device_type = "network";
148			model = "TSEC";
149			compatible = "gianfar";
150			reg = <0x24000 0x1000>;
151			ranges = <0x0 0x24000 0x1000>;
152			local-mac-address = [ 00 00 00 00 00 00 ];
153			interrupts = <29 2 30 2 34 2>;
154			interrupt-parent = <&mpic>;
155			tbi-handle = <&tbi0>;
156			phy-handle = <&phy0>;
157
158			mdio@520 {
159				#address-cells = <1>;
160				#size-cells = <0>;
161				compatible = "fsl,gianfar-mdio";
162				reg = <0x520 0x20>;
163
164				phy0: ethernet-phy@0 {
165					interrupt-parent = <&mpic>;
166					interrupts = <5 1>;
167					reg = <0x0>;
168				};
169				phy1: ethernet-phy@1 {
170					interrupt-parent = <&mpic>;
171					interrupts = <5 1>;
172					reg = <0x1>;
173				};
174				tbi0: tbi-phy@11 {
175					reg = <0x11>;
176					device_type = "tbi-phy";
177				};
178			};
179		};
180
181		enet1: ethernet@25000 {
182			#address-cells = <1>;
183			#size-cells = <1>;
184			cell-index = <1>;
185			device_type = "network";
186			model = "TSEC";
187			compatible = "gianfar";
188			reg = <0x25000 0x1000>;
189			ranges = <0x0 0x25000 0x1000>;
190			local-mac-address = [ 00 00 00 00 00 00 ];
191			interrupts = <35 2 36 2 40 2>;
192			interrupt-parent = <&mpic>;
193			tbi-handle = <&tbi1>;
194			phy-handle = <&phy1>;
195
196			mdio@520 {
197				#address-cells = <1>;
198				#size-cells = <0>;
199				compatible = "fsl,gianfar-tbi";
200				reg = <0x520 0x20>;
201
202				tbi1: tbi-phy@11 {
203					reg = <0x11>;
204					device_type = "tbi-phy";
205				};
206			};
207		};
208
209		serial0: serial@4500 {
210			cell-index = <0>;
211			device_type = "serial";
212			compatible = "fsl,ns16550", "ns16550";
213			reg = <0x4500 0x100>; 	// reg base, size
214			clock-frequency = <0>; 	// should we fill in in uboot?
215			interrupts = <42 2>;
216			interrupt-parent = <&mpic>;
217		};
218
219		serial1: serial@4600 {
220			cell-index = <1>;
221			device_type = "serial";
222			compatible = "fsl,ns16550", "ns16550";
223			reg = <0x4600 0x100>;	// reg base, size
224			clock-frequency = <0>; 	// should we fill in in uboot?
225			interrupts = <42 2>;
226			interrupt-parent = <&mpic>;
227		};
228
229		crypto@30000 {
230			compatible = "fsl,sec2.0";
231			reg = <0x30000 0x10000>;
232			interrupts = <45 2>;
233			interrupt-parent = <&mpic>;
234			fsl,num-channels = <4>;
235			fsl,channel-fifo-len = <24>;
236			fsl,exec-units-mask = <0x7e>;
237			fsl,descriptor-types-mask = <0x01010ebf>;
238		};
239
240		mpic: pic@40000 {
241			interrupt-controller;
242			#address-cells = <0>;
243			#interrupt-cells = <2>;
244			reg = <0x40000 0x40000>;
245			compatible = "chrp,open-pic";
246			device_type = "open-pic";
247		};
248
249		cpm@919c0 {
250			#address-cells = <1>;
251			#size-cells = <1>;
252			compatible = "fsl,mpc8541-cpm", "fsl,cpm2";
253			reg = <0x919c0 0x30>;
254			ranges;
255
256			muram@80000 {
257				#address-cells = <1>;
258				#size-cells = <1>;
259				ranges = <0x0 0x80000 0x10000>;
260
261				data@0 {
262					compatible = "fsl,cpm-muram-data";
263					reg = <0x0 0x2000 0x9000 0x1000>;
264				};
265			};
266
267			brg@919f0 {
268				compatible = "fsl,mpc8541-brg",
269				             "fsl,cpm2-brg",
270				             "fsl,cpm-brg";
271				reg = <0x919f0 0x10 0x915f0 0x10>;
272			};
273
274			cpmpic: pic@90c00 {
275				interrupt-controller;
276				#address-cells = <0>;
277				#interrupt-cells = <2>;
278				interrupts = <46 2>;
279				interrupt-parent = <&mpic>;
280				reg = <0x90c00 0x80>;
281				compatible = "fsl,mpc8541-cpm-pic", "fsl,cpm2-pic";
282			};
283		};
284	};
285
286	pci0: pci@e0008000 {
287		interrupt-map-mask = <0x1f800 0x0 0x0 0x7>;
288		interrupt-map = <
289
290			/* IDSEL 0x10 */
291			0x8000 0x0 0x0 0x1 &mpic 0x0 0x1
292			0x8000 0x0 0x0 0x2 &mpic 0x1 0x1
293			0x8000 0x0 0x0 0x3 &mpic 0x2 0x1
294			0x8000 0x0 0x0 0x4 &mpic 0x3 0x1
295
296			/* IDSEL 0x11 */
297			0x8800 0x0 0x0 0x1 &mpic 0x0 0x1
298			0x8800 0x0 0x0 0x2 &mpic 0x1 0x1
299			0x8800 0x0 0x0 0x3 &mpic 0x2 0x1
300			0x8800 0x0 0x0 0x4 &mpic 0x3 0x1
301
302			/* IDSEL 0x12 (Slot 1) */
303			0x9000 0x0 0x0 0x1 &mpic 0x0 0x1
304			0x9000 0x0 0x0 0x2 &mpic 0x1 0x1
305			0x9000 0x0 0x0 0x3 &mpic 0x2 0x1
306			0x9000 0x0 0x0 0x4 &mpic 0x3 0x1
307
308			/* IDSEL 0x13 (Slot 2) */
309			0x9800 0x0 0x0 0x1 &mpic 0x1 0x1
310			0x9800 0x0 0x0 0x2 &mpic 0x2 0x1
311			0x9800 0x0 0x0 0x3 &mpic 0x3 0x1
312			0x9800 0x0 0x0 0x4 &mpic 0x0 0x1
313
314			/* IDSEL 0x14 (Slot 3) */
315			0xa000 0x0 0x0 0x1 &mpic 0x2 0x1
316			0xa000 0x0 0x0 0x2 &mpic 0x3 0x1
317			0xa000 0x0 0x0 0x3 &mpic 0x0 0x1
318			0xa000 0x0 0x0 0x4 &mpic 0x1 0x1
319
320			/* IDSEL 0x15 (Slot 4) */
321			0xa800 0x0 0x0 0x1 &mpic 0x3 0x1
322			0xa800 0x0 0x0 0x2 &mpic 0x0 0x1
323			0xa800 0x0 0x0 0x3 &mpic 0x1 0x1
324			0xa800 0x0 0x0 0x4 &mpic 0x2 0x1
325
326			/* Bus 1 (Tundra Bridge) */
327			/* IDSEL 0x12 (ISA bridge) */
328			0x19000 0x0 0x0 0x1 &mpic 0x0 0x1
329			0x19000 0x0 0x0 0x2 &mpic 0x1 0x1
330			0x19000 0x0 0x0 0x3 &mpic 0x2 0x1
331			0x19000 0x0 0x0 0x4 &mpic 0x3 0x1>;
332		interrupt-parent = <&mpic>;
333		interrupts = <24 2>;
334		bus-range = <0 0>;
335		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
336			  0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>;
337		clock-frequency = <66666666>;
338		#interrupt-cells = <1>;
339		#size-cells = <2>;
340		#address-cells = <3>;
341		reg = <0xe0008000 0x1000>;
342		compatible = "fsl,mpc8540-pci";
343		device_type = "pci";
344
345		i8259@19000 {
346			interrupt-controller;
347			device_type = "interrupt-controller";
348			reg = <0x19000 0x0 0x0 0x0 0x1>;
349			#address-cells = <0>;
350			#interrupt-cells = <2>;
351			compatible = "chrp,iic";
352			interrupts = <1>;
353			interrupt-parent = <&pci0>;
354		};
355	};
356
357	pci1: pci@e0009000 {
358		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
359		interrupt-map = <
360
361			/* IDSEL 0x15 */
362			0xa800 0x0 0x0 0x1 &mpic 0xb 0x1
363			0xa800 0x0 0x0 0x2 &mpic 0xb 0x1
364			0xa800 0x0 0x0 0x3 &mpic 0xb 0x1
365			0xa800 0x0 0x0 0x4 &mpic 0xb 0x1>;
366		interrupt-parent = <&mpic>;
367		interrupts = <25 2>;
368		bus-range = <0 0>;
369		ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
370			  0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>;
371		clock-frequency = <66666666>;
372		#interrupt-cells = <1>;
373		#size-cells = <2>;
374		#address-cells = <3>;
375		reg = <0xe0009000 0x1000>;
376		compatible = "fsl,mpc8540-pci";
377		device_type = "pci";
378	};
379};
380