1/*
2 * Generate definitions needed by assembly language modules.
3 * This code generates raw asm output which is post-processed
4 * to extract and format the required data.
5 */
6
7#include <linux/sched.h>
8#include <linux/signal.h>
9#include <linux/personality.h>
10#include <linux/kbuild.h>
11#include <asm/ucontext.h>
12#include <asm/processor.h>
13#include <asm/thread_info.h>
14#include <asm/ptrace.h>
15#include "sigframe.h"
16#include "mn10300-serial.h"
17
18void foo(void)
19{
20	OFFSET(SIGCONTEXT_d0, sigcontext, d0);
21	OFFSET(SIGCONTEXT_d1, sigcontext, d1);
22	BLANK();
23
24	OFFSET(TI_task,			thread_info, task);
25	OFFSET(TI_frame,		thread_info, frame);
26	OFFSET(TI_flags,		thread_info, flags);
27	OFFSET(TI_cpu,			thread_info, cpu);
28	OFFSET(TI_preempt_count,	thread_info, preempt_count);
29	OFFSET(TI_addr_limit,		thread_info, addr_limit);
30	BLANK();
31
32	OFFSET(REG_D0,			pt_regs, d0);
33	OFFSET(REG_D1,			pt_regs, d1);
34	OFFSET(REG_D2,			pt_regs, d2);
35	OFFSET(REG_D3,			pt_regs, d3);
36	OFFSET(REG_A0,			pt_regs, a0);
37	OFFSET(REG_A1,			pt_regs, a1);
38	OFFSET(REG_A2,			pt_regs, a2);
39	OFFSET(REG_A3,			pt_regs, a3);
40	OFFSET(REG_E0,			pt_regs, e0);
41	OFFSET(REG_E1,			pt_regs, e1);
42	OFFSET(REG_E2,			pt_regs, e2);
43	OFFSET(REG_E3,			pt_regs, e3);
44	OFFSET(REG_E4,			pt_regs, e4);
45	OFFSET(REG_E5,			pt_regs, e5);
46	OFFSET(REG_E6,			pt_regs, e6);
47	OFFSET(REG_E7,			pt_regs, e7);
48	OFFSET(REG_SP,			pt_regs, sp);
49	OFFSET(REG_EPSW,		pt_regs, epsw);
50	OFFSET(REG_PC,			pt_regs, pc);
51	OFFSET(REG_LAR,			pt_regs, lar);
52	OFFSET(REG_LIR,			pt_regs, lir);
53	OFFSET(REG_MDR,			pt_regs, mdr);
54	OFFSET(REG_MCVF,		pt_regs, mcvf);
55	OFFSET(REG_MCRL,		pt_regs, mcrl);
56	OFFSET(REG_MCRH,		pt_regs, mcrh);
57	OFFSET(REG_MDRQ,		pt_regs, mdrq);
58	OFFSET(REG_ORIG_D0,		pt_regs, orig_d0);
59	OFFSET(REG_NEXT,		pt_regs, next);
60	DEFINE(REG__END,		sizeof(struct pt_regs));
61	BLANK();
62
63	OFFSET(THREAD_UREGS,		thread_struct, uregs);
64	OFFSET(THREAD_PC,		thread_struct, pc);
65	OFFSET(THREAD_SP,		thread_struct, sp);
66	OFFSET(THREAD_A3,		thread_struct, a3);
67	OFFSET(THREAD_USP,		thread_struct, usp);
68#ifdef CONFIG_FPU
69	OFFSET(THREAD_FPU_FLAGS,	thread_struct, fpu_flags);
70	OFFSET(THREAD_FPU_STATE,	thread_struct, fpu_state);
71	DEFINE(__THREAD_USING_FPU,	THREAD_USING_FPU);
72	DEFINE(__THREAD_HAS_FPU,	THREAD_HAS_FPU);
73#endif /* CONFIG_FPU */
74	BLANK();
75
76	OFFSET(TASK_THREAD,		task_struct, thread);
77	BLANK();
78
79	DEFINE(CLONE_VM_asm,		CLONE_VM);
80	DEFINE(CLONE_FS_asm,		CLONE_FS);
81	DEFINE(CLONE_FILES_asm,		CLONE_FILES);
82	DEFINE(CLONE_SIGHAND_asm,	CLONE_SIGHAND);
83	DEFINE(CLONE_UNTRACED_asm,	CLONE_UNTRACED);
84	DEFINE(SIGCHLD_asm,		SIGCHLD);
85	BLANK();
86
87	OFFSET(RT_SIGFRAME_sigcontext,	rt_sigframe, uc.uc_mcontext);
88
89	DEFINE(PAGE_SIZE_asm,		PAGE_SIZE);
90
91	OFFSET(__rx_buffer,		mn10300_serial_port, rx_buffer);
92	OFFSET(__rx_inp,		mn10300_serial_port, rx_inp);
93	OFFSET(__rx_outp,		mn10300_serial_port, rx_outp);
94	OFFSET(__uart_state,		mn10300_serial_port, uart.state);
95	OFFSET(__tx_xchar,		mn10300_serial_port, tx_xchar);
96	OFFSET(__tx_flags,		mn10300_serial_port, tx_flags);
97	OFFSET(__intr_flags,		mn10300_serial_port, intr_flags);
98	OFFSET(__rx_icr,		mn10300_serial_port, rx_icr);
99	OFFSET(__tx_icr,		mn10300_serial_port, tx_icr);
100	OFFSET(__tm_icr,		mn10300_serial_port, _tmicr);
101	OFFSET(__iobase,		mn10300_serial_port, _iobase);
102
103	DEFINE(__UART_XMIT_SIZE,	UART_XMIT_SIZE);
104	OFFSET(__xmit_buffer,		uart_state, xmit.buf);
105	OFFSET(__xmit_head,		uart_state, xmit.head);
106	OFFSET(__xmit_tail,		uart_state, xmit.tail);
107}
108