1/ {
2	#address-cells = <1>;
3	#size-cells = <1>;
4	compatible = "brcm,bcm3384-viper", "brcm,bcm33843-viper";
5
6	memory@0 {
7		device_type = "memory";
8
9		/* Typical ranges.  The bootloader should fill these in. */
10		reg = <0x06000000 0x02000000>,
11		      <0x0e000000 0x02000000>;
12	};
13
14	cpus {
15		#address-cells = <1>;
16		#size-cells = <0>;
17
18		/* 1/2 of the CPU core clock (standard MIPS behavior) */
19		mips-hpt-frequency = <300000000>;
20
21		cpu@0 {
22			compatible = "brcm,bmips4350";
23			device_type = "cpu";
24			reg = <0>;
25		};
26	};
27
28	cpu_intc: cpu_intc {
29		#address-cells = <0>;
30		compatible = "mti,cpu-interrupt-controller";
31
32		interrupt-controller;
33		#interrupt-cells = <1>;
34	};
35
36	clocks {
37		periph_clk: periph_clk {
38			compatible = "fixed-clock";
39			#clock-cells = <0>;
40			clock-frequency = <54000000>;
41		};
42	};
43
44	aliases {
45		uart0 = &uart0;
46	};
47
48	ubus {
49		#address-cells = <1>;
50		#size-cells = <1>;
51
52		compatible = "brcm,ubus", "simple-bus";
53		ranges;
54		/* No dma-ranges on Viper. */
55
56		periph_intc: periph_intc@14e00048 {
57			compatible = "brcm,bcm3380-l2-intc";
58			reg = <0x14e00048 0x4 0x14e0004c 0x4>,
59			      <0x14e00350 0x4 0x14e00354 0x4>;
60
61			interrupt-controller;
62			#interrupt-cells = <1>;
63
64			interrupt-parent = <&cpu_intc>;
65			interrupts = <4>;
66		};
67
68		cmips_intc: cmips_intc@151f8048 {
69			compatible = "brcm,bcm3380-l2-intc";
70			reg = <0x151f8048 0x4 0x151f804c 0x4>;
71
72			interrupt-controller;
73			#interrupt-cells = <1>;
74
75			interrupt-parent = <&periph_intc>;
76			interrupts = <30>;
77			brcm,int-map-mask = <0xffffffff>;
78		};
79
80		uart0: serial@14e00520 {
81			compatible = "brcm,bcm6345-uart";
82			reg = <0x14e00520 0x18>;
83			interrupt-parent = <&periph_intc>;
84			interrupts = <2>;
85			clocks = <&periph_clk>;
86			status = "disabled";
87		};
88
89		ehci0: usb@15400300 {
90			compatible = "brcm,bcm3384-ehci", "generic-ehci";
91			reg = <0x15400300 0x100>;
92			big-endian;
93			interrupt-parent = <&periph_intc>;
94			interrupts = <41>;
95			status = "disabled";
96		};
97
98		ohci0: usb@15400400 {
99			compatible = "brcm,bcm3384-ohci", "generic-ohci";
100			reg = <0x15400400 0x100>;
101			big-endian;
102			no-big-frame-no;
103			interrupt-parent = <&periph_intc>;
104			interrupts = <40>;
105			status = "disabled";
106		};
107	};
108};
109