1|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2|MOTOROLA MICROPROCESSOR & MEMORY TECHNOLOGY GROUP
3|M68000 Hi-Performance Microprocessor Division
4|M68060 Software Package
5|Production Release P1.00 -- October 10, 1994
6|
7|M68060 Software Package Copyright © 1993, 1994 Motorola Inc.  All rights reserved.
8|
9|THE SOFTWARE is provided on an "AS IS" basis and without warranty.
10|To the maximum extent permitted by applicable law,
11|MOTOROLA DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED,
12|INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
13|and any warranty against infringement with regard to the SOFTWARE
14|(INCLUDING ANY MODIFIED VERSIONS THEREOF) and any accompanying written materials.
15|
16|To the maximum extent permitted by applicable law,
17|IN NO EVENT SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER
18|(INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS,
19|BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS)
20|ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE.
21|Motorola assumes no responsibility for the maintenance and support of the SOFTWARE.
22|
23|You are hereby granted a copyright license to use, modify, and distribute the SOFTWARE
24|so long as this entire notice is retained without alteration in any modified and/or
25|redistributed versions, and that such modified versions are clearly identified as such.
26|No licenses are granted by implication, estoppel or otherwise under any patents
27|or trademarks of Motorola, Inc.
28|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
29| fskeleton.s
30|
31| This file contains:
32|	(1) example "Call-out"s
33|	(2) example package entry code
34|	(3) example "Call-out" table
35|
36
37#include <linux/linkage.h>
38
39|################################
40| (1) EXAMPLE CALL-OUTS		#
41|				#
42| _060_fpsp_done()		#
43| _060_real_ovfl()		#
44| _060_real_unfl()		#
45| _060_real_operr()		#
46| _060_real_snan()		#
47| _060_real_dz()		#
48| _060_real_inex()		#
49| _060_real_bsun()		#
50| _060_real_fline()		#
51| _060_real_fpu_disabled()	#
52| _060_real_trap()		#
53|################################
54
55|
56| _060_fpsp_done():
57|
58| This is the main exit point for the 68060 Floating-Point
59| Software Package. For a normal exit, all 060FPSP routines call this
60| routine. The operating system can do system dependent clean-up or
61| simply execute an "rte" as with the sample code below.
62|
63	.global		_060_fpsp_done
64_060_fpsp_done:
65	bral	 _060_isp_done	| do the same as isp_done
66
67|
68| _060_real_ovfl():
69|
70| This is the exit point for the 060FPSP when an enabled overflow exception
71| is present. The routine below should point to the operating system handler
72| for enabled overflow conditions. The exception stack frame is an overflow
73| stack frame. The FP state frame holds the EXCEPTIONAL OPERAND.
74|
75| The sample routine below simply clears the exception status bit and
76| does an "rte".
77|
78	.global		_060_real_ovfl
79_060_real_ovfl:
80	fsave		-(%sp)
81	move.w		#0x6000,0x2(%sp)
82	frestore	(%sp)+
83	bral		trap	| jump to trap handler
84
85
86|
87| _060_real_unfl():
88|
89| This is the exit point for the 060FPSP when an enabled underflow exception
90| is present. The routine below should point to the operating system handler
91| for enabled underflow conditions. The exception stack frame is an underflow
92| stack frame. The FP state frame holds the EXCEPTIONAL OPERAND.
93|
94| The sample routine below simply clears the exception status bit and
95| does an "rte".
96|
97	.global		_060_real_unfl
98_060_real_unfl:
99	fsave		-(%sp)
100	move.w		#0x6000,0x2(%sp)
101	frestore	(%sp)+
102	bral		trap	| jump to trap handler
103
104|
105| _060_real_operr():
106|
107| This is the exit point for the 060FPSP when an enabled operand error exception
108| is present. The routine below should point to the operating system handler
109| for enabled operand error exceptions. The exception stack frame is an operand error
110| stack frame. The FP state frame holds the source operand of the faulting
111| instruction.
112|
113| The sample routine below simply clears the exception status bit and
114| does an "rte".
115|
116	.global		_060_real_operr
117_060_real_operr:
118	fsave		-(%sp)
119	move.w		#0x6000,0x2(%sp)
120	frestore	(%sp)+
121	bral		trap	| jump to trap handler
122
123|
124| _060_real_snan():
125|
126| This is the exit point for the 060FPSP when an enabled signalling NaN exception
127| is present. The routine below should point to the operating system handler
128| for enabled signalling NaN exceptions. The exception stack frame is a signalling NaN
129| stack frame. The FP state frame holds the source operand of the faulting
130| instruction.
131|
132| The sample routine below simply clears the exception status bit and
133| does an "rte".
134|
135	.global		_060_real_snan
136_060_real_snan:
137	fsave		-(%sp)
138	move.w		#0x6000,0x2(%sp)
139	frestore	(%sp)+
140	bral		trap	| jump to trap handler
141
142|
143| _060_real_dz():
144|
145| This is the exit point for the 060FPSP when an enabled divide-by-zero exception
146| is present. The routine below should point to the operating system handler
147| for enabled divide-by-zero exceptions. The exception stack frame is a divide-by-zero
148| stack frame. The FP state frame holds the source operand of the faulting
149| instruction.
150|
151| The sample routine below simply clears the exception status bit and
152| does an "rte".
153|
154	.global		_060_real_dz
155_060_real_dz:
156	fsave		-(%sp)
157	move.w		#0x6000,0x2(%sp)
158	frestore	(%sp)+
159	bral		trap	| jump to trap handler
160
161|
162| _060_real_inex():
163|
164| This is the exit point for the 060FPSP when an enabled inexact exception
165| is present. The routine below should point to the operating system handler
166| for enabled inexact exceptions. The exception stack frame is an inexact
167| stack frame. The FP state frame holds the source operand of the faulting
168| instruction.
169|
170| The sample routine below simply clears the exception status bit and
171| does an "rte".
172|
173	.global		_060_real_inex
174_060_real_inex:
175	fsave		-(%sp)
176	move.w		#0x6000,0x2(%sp)
177	frestore	(%sp)+
178	bral		trap	| jump to trap handler
179
180|
181| _060_real_bsun():
182|
183| This is the exit point for the 060FPSP when an enabled bsun exception
184| is present. The routine below should point to the operating system handler
185| for enabled bsun exceptions. The exception stack frame is a bsun
186| stack frame.
187|
188| The sample routine below clears the exception status bit, clears the NaN
189| bit in the FPSR, and does an "rte". The instruction that caused the
190| bsun will now be re-executed but with the NaN FPSR bit cleared.
191|
192	.global		_060_real_bsun
193_060_real_bsun:
194|	fsave		-(%sp)
195
196	fmove.l		%fpsr,-(%sp)
197	andi.b		#0xfe,(%sp)
198	fmove.l		(%sp)+,%fpsr
199
200	bral		trap	| jump to trap handler
201
202|
203| _060_real_fline():
204|
205| This is the exit point for the 060FPSP when an F-Line Illegal exception is
206| encountered. Three different types of exceptions can enter the F-Line exception
207| vector number 11: FP Unimplemented Instructions, FP implemented instructions when
208| the FPU is disabled, and F-Line Illegal instructions. The 060FPSP module
209| _fpsp_fline() distinguishes between the three and acts appropriately. F-Line
210| Illegals branch here.
211|
212	.global		_060_real_fline
213_060_real_fline:
214	bral		trap	| jump to trap handler
215
216|
217| _060_real_fpu_disabled():
218|
219| This is the exit point for the 060FPSP when an FPU disabled exception is
220| encountered. Three different types of exceptions can enter the F-Line exception
221| vector number 11: FP Unimplemented Instructions, FP implemented instructions when
222| the FPU is disabled, and F-Line Illegal instructions. The 060FPSP module
223| _fpsp_fline() distinguishes between the three and acts appropriately. FPU disabled
224| exceptions branch here.
225|
226| The sample code below enables the FPU, sets the PC field in the exception stack
227| frame to the PC of the instruction causing the exception, and does an "rte".
228| The execution of the instruction then proceeds with an enabled floating-point
229| unit.
230|
231	.global		_060_real_fpu_disabled
232_060_real_fpu_disabled:
233	move.l		%d0,-(%sp)		| enabled the fpu
234	.long	0x4E7A0808			|movec		pcr,%d0
235	bclr		#0x1,%d0
236	.long	0x4E7B0808			|movec		%d0,pcr
237	move.l		(%sp)+,%d0
238
239	move.l		0xc(%sp),0x2(%sp)	| set "Current PC"
240	rte
241
242|
243| _060_real_trap():
244|
245| This is the exit point for the 060FPSP when an emulated "ftrapcc" instruction
246| discovers that the trap condition is true and it should branch to the operating
247| system handler for the trap exception vector number 7.
248|
249| The sample code below simply executes an "rte".
250|
251	.global		_060_real_trap
252_060_real_trap:
253	bral		trap	| jump to trap handler
254
255|############################################################################
256
257|#################################
258| (2) EXAMPLE PACKAGE ENTRY CODE #
259|#################################
260
261	.global		_060_fpsp_snan
262_060_fpsp_snan:
263	bra.l		_FP_CALL_TOP+0x80+0x00
264
265	.global		_060_fpsp_operr
266_060_fpsp_operr:
267	bra.l		_FP_CALL_TOP+0x80+0x08
268
269	.global		_060_fpsp_ovfl
270_060_fpsp_ovfl:
271	bra.l		_FP_CALL_TOP+0x80+0x10
272
273	.global		_060_fpsp_unfl
274_060_fpsp_unfl:
275	bra.l		_FP_CALL_TOP+0x80+0x18
276
277	.global		_060_fpsp_dz
278_060_fpsp_dz:
279	bra.l		_FP_CALL_TOP+0x80+0x20
280
281	.global		_060_fpsp_inex
282_060_fpsp_inex:
283	bra.l		_FP_CALL_TOP+0x80+0x28
284
285	.global		_060_fpsp_fline
286_060_fpsp_fline:
287	bra.l		_FP_CALL_TOP+0x80+0x30
288
289	.global		_060_fpsp_unsupp
290_060_fpsp_unsupp:
291	bra.l		_FP_CALL_TOP+0x80+0x38
292
293	.global		_060_fpsp_effadd
294_060_fpsp_effadd:
295	bra.l		_FP_CALL_TOP+0x80+0x40
296
297|############################################################################
298
299|###############################
300| (3) EXAMPLE CALL-OUT SECTION #
301|###############################
302
303| The size of this section MUST be 128 bytes!!!
304
305_FP_CALL_TOP:
306	.long	_060_real_bsun		- _FP_CALL_TOP
307	.long	_060_real_snan		- _FP_CALL_TOP
308	.long	_060_real_operr		- _FP_CALL_TOP
309	.long	_060_real_ovfl		- _FP_CALL_TOP
310	.long	_060_real_unfl		- _FP_CALL_TOP
311	.long	_060_real_dz		- _FP_CALL_TOP
312	.long	_060_real_inex		- _FP_CALL_TOP
313	.long	_060_real_fline		- _FP_CALL_TOP
314	.long	_060_real_fpu_disabled	- _FP_CALL_TOP
315	.long	_060_real_trap		- _FP_CALL_TOP
316	.long	_060_real_trace		- _FP_CALL_TOP
317	.long	_060_real_access	- _FP_CALL_TOP
318	.long	_060_fpsp_done		- _FP_CALL_TOP
319
320	.long	0x00000000, 0x00000000, 0x00000000
321
322	.long	_060_imem_read		- _FP_CALL_TOP
323	.long	_060_dmem_read		- _FP_CALL_TOP
324	.long	_060_dmem_write		- _FP_CALL_TOP
325	.long	_060_imem_read_word	- _FP_CALL_TOP
326	.long	_060_imem_read_long	- _FP_CALL_TOP
327	.long	_060_dmem_read_byte	- _FP_CALL_TOP
328	.long	_060_dmem_read_word	- _FP_CALL_TOP
329	.long	_060_dmem_read_long	- _FP_CALL_TOP
330	.long	_060_dmem_write_byte	- _FP_CALL_TOP
331	.long	_060_dmem_write_word	- _FP_CALL_TOP
332	.long	_060_dmem_write_long	- _FP_CALL_TOP
333
334	.long	0x00000000
335
336	.long	0x00000000, 0x00000000, 0x00000000, 0x00000000
337
338|############################################################################
339
340| 060 FPSP KERNEL PACKAGE NEEDS TO GO HERE!!!
341
342#include "fpsp.sa"
343