1/*
2 *  linux/arch/m32r/platforms/mappi2/setup.c
3 *
4 *  Setup routines for Renesas MAPPI-II(M3A-ZA36) Board
5 *
6 *  Copyright (c) 2001-2005  Hiroyuki Kondo, Hirokazu Takata,
7 *                           Hitoshi Yamamoto, Mamoru Sakugawa
8 */
9
10#include <linux/irq.h>
11#include <linux/kernel.h>
12#include <linux/init.h>
13#include <linux/platform_device.h>
14
15#include <asm/m32r.h>
16#include <asm/io.h>
17
18#define irq2port(x) (M32R_ICU_CR1_PORTL + ((x - 1) * sizeof(unsigned long)))
19
20icu_data_t icu_data[NR_IRQS];
21
22static void disable_mappi2_irq(unsigned int irq)
23{
24	unsigned long port, data;
25
26	if ((irq == 0) ||(irq >= NR_IRQS))  {
27		printk("bad irq 0x%08x\n", irq);
28		return;
29	}
30	port = irq2port(irq);
31	data = icu_data[irq].icucr|M32R_ICUCR_ILEVEL7;
32	outl(data, port);
33}
34
35static void enable_mappi2_irq(unsigned int irq)
36{
37	unsigned long port, data;
38
39	if ((irq == 0) ||(irq >= NR_IRQS))  {
40		printk("bad irq 0x%08x\n", irq);
41		return;
42	}
43	port = irq2port(irq);
44	data = icu_data[irq].icucr|M32R_ICUCR_IEN|M32R_ICUCR_ILEVEL6;
45	outl(data, port);
46}
47
48static void mask_mappi2(struct irq_data *data)
49{
50	disable_mappi2_irq(data->irq);
51}
52
53static void unmask_mappi2(struct irq_data *data)
54{
55	enable_mappi2_irq(data->irq);
56}
57
58static void shutdown_mappi2(struct irq_data *data)
59{
60	unsigned long port;
61
62	port = irq2port(data->irq);
63	outl(M32R_ICUCR_ILEVEL7, port);
64}
65
66static struct irq_chip mappi2_irq_type =
67{
68	.name		= "MAPPI2-IRQ",
69	.irq_shutdown	= shutdown_mappi2,
70	.irq_mask	= mask_mappi2,
71	.irq_unmask	= unmask_mappi2,
72};
73
74void __init init_IRQ(void)
75{
76#if defined(CONFIG_SMC91X)
77	/* INT0 : LAN controller (SMC91111) */
78	irq_set_chip_and_handler(M32R_IRQ_INT0, &mappi2_irq_type,
79				 handle_level_irq);
80	icu_data[M32R_IRQ_INT0].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10;
81	disable_mappi2_irq(M32R_IRQ_INT0);
82#endif  /* CONFIG_SMC91X */
83
84	/* MFT2 : system timer */
85	irq_set_chip_and_handler(M32R_IRQ_MFT2, &mappi2_irq_type,
86				 handle_level_irq);
87	icu_data[M32R_IRQ_MFT2].icucr = M32R_ICUCR_IEN;
88	disable_mappi2_irq(M32R_IRQ_MFT2);
89
90#ifdef CONFIG_SERIAL_M32R_SIO
91	/* SIO0_R : uart receive data */
92	irq_set_chip_and_handler(M32R_IRQ_SIO0_R, &mappi2_irq_type,
93				 handle_level_irq);
94	icu_data[M32R_IRQ_SIO0_R].icucr = 0;
95	disable_mappi2_irq(M32R_IRQ_SIO0_R);
96
97	/* SIO0_S : uart send data */
98	irq_set_chip_and_handler(M32R_IRQ_SIO0_S, &mappi2_irq_type,
99				 handle_level_irq);
100	icu_data[M32R_IRQ_SIO0_S].icucr = 0;
101	disable_mappi2_irq(M32R_IRQ_SIO0_S);
102	/* SIO1_R : uart receive data */
103	irq_set_chip_and_handler(M32R_IRQ_SIO1_R, &mappi2_irq_type,
104				 handle_level_irq);
105	icu_data[M32R_IRQ_SIO1_R].icucr = 0;
106	disable_mappi2_irq(M32R_IRQ_SIO1_R);
107
108	/* SIO1_S : uart send data */
109	irq_set_chip_and_handler(M32R_IRQ_SIO1_S, &mappi2_irq_type,
110				 handle_level_irq);
111	icu_data[M32R_IRQ_SIO1_S].icucr = 0;
112	disable_mappi2_irq(M32R_IRQ_SIO1_S);
113#endif  /* CONFIG_M32R_USE_DBG_CONSOLE */
114
115#if defined(CONFIG_USB)
116	/* INT1 : USB Host controller interrupt */
117	irq_set_chip_and_handler(M32R_IRQ_INT1, &mappi2_irq_type,
118				 handle_level_irq);
119	icu_data[M32R_IRQ_INT1].icucr = M32R_ICUCR_ISMOD01;
120	disable_mappi2_irq(M32R_IRQ_INT1);
121#endif /* CONFIG_USB */
122
123	/* ICUCR40: CFC IREQ */
124	irq_set_chip_and_handler(PLD_IRQ_CFIREQ, &mappi2_irq_type,
125				 handle_level_irq);
126	icu_data[PLD_IRQ_CFIREQ].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD01;
127	disable_mappi2_irq(PLD_IRQ_CFIREQ);
128
129#if defined(CONFIG_M32R_CFC)
130	/* ICUCR41: CFC Insert */
131	irq_set_chip_and_handler(PLD_IRQ_CFC_INSERT, &mappi2_irq_type,
132				 handle_level_irq);
133	icu_data[PLD_IRQ_CFC_INSERT].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD00;
134	disable_mappi2_irq(PLD_IRQ_CFC_INSERT);
135
136	/* ICUCR42: CFC Eject */
137	irq_set_chip_and_handler(PLD_IRQ_CFC_EJECT, &mappi2_irq_type,
138				 handle_level_irq);
139	icu_data[PLD_IRQ_CFC_EJECT].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10;
140	disable_mappi2_irq(PLD_IRQ_CFC_EJECT);
141#endif /* CONFIG_MAPPI2_CFC */
142}
143
144#define LAN_IOSTART     0x300
145#define LAN_IOEND       0x320
146static struct resource smc91x_resources[] = {
147	[0] = {
148		.start  = (LAN_IOSTART),
149		.end    = (LAN_IOEND),
150		.flags  = IORESOURCE_MEM,
151	},
152	[1] = {
153		.start  = M32R_IRQ_INT0,
154		.end    = M32R_IRQ_INT0,
155		.flags  = IORESOURCE_IRQ,
156	}
157};
158
159static struct platform_device smc91x_device = {
160	.name		= "smc91x",
161	.id		= 0,
162	.num_resources  = ARRAY_SIZE(smc91x_resources),
163	.resource       = smc91x_resources,
164};
165
166static int __init platform_init(void)
167{
168	platform_device_register(&smc91x_device);
169	return 0;
170}
171arch_initcall(platform_init);
172