1/*
2 * EFI call stub.
3 *
4 * Copyright (C) 1999-2001 Hewlett-Packard Co
5 *	David Mosberger <davidm@hpl.hp.com>
6 *
7 * This stub allows us to make EFI calls in physical mode with interrupts
8 * turned off.  We need this because we can't call SetVirtualMap() until
9 * the kernel has booted far enough to allow allocation of struct vma_struct
10 * entries (which we would need to map stuff with memory attributes other
11 * than uncached or writeback...).  Since the GetTime() service gets called
12 * earlier than that, we need to be able to make physical mode EFI calls from
13 * the kernel.
14 */
15
16/*
17 * PSR settings as per SAL spec (Chapter 8 in the "IA-64 System
18 * Abstraction Layer Specification", revision 2.6e).  Note that
19 * psr.dfl and psr.dfh MUST be cleared, despite what this manual says.
20 * Otherwise, SAL dies whenever it's trying to do an IA-32 BIOS call
21 * (the br.ia instruction fails unless psr.dfl and psr.dfh are
22 * cleared).  Fortunately, SAL promises not to touch the floating
23 * point regs, so at least we don't have to save f2-f127.
24 */
25#define PSR_BITS_TO_CLEAR						\
26	(IA64_PSR_I | IA64_PSR_IT | IA64_PSR_DT | IA64_PSR_RT |		\
27	 IA64_PSR_DD | IA64_PSR_SS | IA64_PSR_RI | IA64_PSR_ED |	\
28	 IA64_PSR_DFL | IA64_PSR_DFH)
29
30#define PSR_BITS_TO_SET							\
31	(IA64_PSR_BN)
32
33#include <asm/processor.h>
34#include <asm/asmmacro.h>
35
36/*
37 * Inputs:
38 *	in0 = address of function descriptor of EFI routine to call
39 *	in1..in7 = arguments to routine
40 *
41 * Outputs:
42 *	r8 = EFI_STATUS returned by called function
43 */
44
45GLOBAL_ENTRY(efi_call_phys)
46	.prologue ASM_UNW_PRLG_RP|ASM_UNW_PRLG_PFS, ASM_UNW_PRLG_GRSAVE(8)
47	alloc loc1=ar.pfs,8,7,7,0
48	ld8 r2=[in0],8			// load EFI function's entry point
49	mov loc0=rp
50	.body
51	;;
52	mov loc2=gp			// save global pointer
53	mov loc4=ar.rsc			// save RSE configuration
54	mov ar.rsc=0			// put RSE in enforced lazy, LE mode
55	;;
56	ld8 gp=[in0]			// load EFI function's global pointer
57	movl r16=PSR_BITS_TO_CLEAR
58	mov loc3=psr			// save processor status word
59	movl r17=PSR_BITS_TO_SET
60	;;
61	or loc3=loc3,r17
62	mov b6=r2
63	;;
64	andcm r16=loc3,r16	// get psr with IT, DT, and RT bits cleared
65	br.call.sptk.many rp=ia64_switch_mode_phys
66.ret0:	mov out4=in5
67	mov out0=in1
68	mov out1=in2
69	mov out2=in3
70	mov out3=in4
71	mov out5=in6
72	mov out6=in7
73	mov loc5=r19
74	mov loc6=r20
75	br.call.sptk.many rp=b6		// call the EFI function
76.ret1:	mov ar.rsc=0			// put RSE in enforced lazy, LE mode
77	mov r16=loc3
78	mov r19=loc5
79	mov r20=loc6
80	br.call.sptk.many rp=ia64_switch_mode_virt // return to virtual mode
81.ret2:	mov ar.rsc=loc4			// restore RSE configuration
82	mov ar.pfs=loc1
83	mov rp=loc0
84	mov gp=loc2
85	br.ret.sptk.many rp
86END(efi_call_phys)
87