1/* cmode.S: clock mode management
2 *
3 * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
4 * Written by David Woodhouse (dwmw2@infradead.org)
5 *
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License
8 * as published by the Free Software Foundation; either version
9 * 2 of the License, or (at your option) any later version.
10 *
11 */
12
13#include <linux/sys.h>
14#include <linux/linkage.h>
15#include <asm/setup.h>
16#include <asm/segment.h>
17#include <asm/ptrace.h>
18#include <asm/errno.h>
19#include <asm/cache.h>
20#include <asm/spr-regs.h>
21
22#define __addr_MASK	0xfeff9820	/* interrupt controller mask */
23
24#define __addr_SDRAMC	0xfe000400	/* SDRAM controller regs */
25#define SDRAMC_DSTS	0x28		/* SDRAM status */
26#define SDRAMC_DSTS_SSI	0x00000001	/* indicates that the SDRAM is in self-refresh mode */
27#define SDRAMC_DRCN	0x30		/* SDRAM refresh control */
28#define SDRAMC_DRCN_SR	0x00000001	/* transition SDRAM into self-refresh mode */
29#define __addr_CLKC	0xfeff9a00
30#define CLKC_SWCMODE	0x00000008
31#define __addr_LEDS	0xe1200004
32
33.macro li v r
34	sethi.p		%hi(\v),\r
35	setlo		%lo(\v),\r
36.endm
37
38	.text
39	.balign		4
40
41
42###############################################################################
43#
44# Change CMODE
45# - void frv_change_cmode(int cmode)
46#
47###############################################################################
48	.globl		frv_change_cmode
49        .type		frv_change_cmode,@function
50
51.macro	LEDS v
52#ifdef DEBUG_CMODE
53	setlos	#~\v,gr10
54	sti	gr10,@(gr11,#0)
55	membar
56#endif
57.endm
58
59frv_change_cmode:
60	movsg		lr,gr9
61#ifdef DEBUG_CMODE
62	li		__addr_LEDS,gr11
63#endif
64	dcef		@(gr0,gr0),#1
65
66	# Shift argument left by 24 bits to fit in SWCMODE register later.
67	slli		gr8,#24,gr8
68
69	# (1) Set '0' in the PSR.ET bit, and prohibit interrupts.
70	movsg		psr,gr14
71	andi		gr14,#~PSR_ET,gr3
72	movgs		gr3,psr
73
74#if 0 // Fujitsu recommend to skip this and will update docs.
75	# (2) Set '0' to all bits of the MASK register of the interrupt
76	#     controller, and mask interrupts.
77	li		__addr_MASK,gr12
78	ldi		@(gr12,#0),gr13
79	li		0xffff0000,gr4
80	sti		gr4,@(gr12,#0)
81#endif
82
83	# (3) Stop the transfer function of DMAC. Stop all the bus masters
84	#     to access SDRAM and the internal resources.
85
86	# (already done by caller)
87
88	# (4) Preload a series of following instructions to the instruction
89	#     cache.
90	li		#__cmode_icache_lock_start,gr3
91	li		#__cmode_icache_lock_end,gr4
92
931:	icpl		gr3,gr0,#1
94	addi		gr3,#L1_CACHE_BYTES,gr3
95	cmp		gr4,gr3,icc0
96	bhi		icc0,#0,1b
97
98	# Set up addresses in regs for later steps.
99	setlos		SDRAMC_DRCN_SR,gr3
100	li		__addr_SDRAMC,gr4
101	li		__addr_CLKC,gr5
102	ldi		@(gr5,#0),gr6
103	li		#0x80000000,gr7
104	or		gr6,gr7,gr6
105
106	bra		__cmode_icache_lock_start
107
108	.balign	L1_CACHE_BYTES
109__cmode_icache_lock_start:
110
111	# (5) Flush the content of all caches by the DCEF instruction.
112	dcef		@(gr0,gr0),#1
113
114	# (6) Execute loading the dummy for SDRAM.
115	ldi		@(gr9,#0),gr0
116
117	# (7) Set '1' to the DRCN.SR bit, and change SDRAM to the
118	#     self-refresh mode. Execute the dummy load to all memory
119	#     devices set to cacheable on the external bus side in parallel
120	#     with this.
121	sti		gr3,@(gr4,#SDRAMC_DRCN)
122
123	# (8) Execute memory barrier instruction (MEMBAR).
124	membar
125
126	# (9) Read the DSTS register repeatedly until '1' stands in the
127	#     DSTS.SSI field.
1281:	ldi		@(gr4,#SDRAMC_DSTS),gr3
129	andicc		gr3,#SDRAMC_DSTS_SSI,gr3,icc0
130	beq		icc0,#0,1b
131
132	# (10) Execute memory barrier instruction (MEMBAR).
133	membar
134
135#if 1
136	# (11) Set the value of CMODE that you want to change to
137	#      SWCMODE.SWCM[3:0].
138	sti		gr8,@(gr5,#CLKC_SWCMODE)
139
140	# (12) Set '1' to the CLKC.SWEN bit. In that case, do not change
141	#      fields other than SWEN of the CLKC register.
142	sti		gr6,@(gr5,#0)
143#endif
144	# (13) Execute the instruction just after the memory barrier
145	# instruction that executes the self-loop 256 times. (Meanwhile,
146	# the CMODE switch is done.)
147	membar
148	setlos		#256,gr7
1492:	subicc		gr7,#1,gr7,icc0
150	bne		icc0,#2,2b
151
152	LEDS	0x36
153
154	# (14) Release the self-refresh of SDRAM.
155	sti		gr0,@(gr4,#SDRAMC_DRCN)
156
157	# Wait for it...
1583:	ldi		@(gr4,#SDRAMC_DSTS),gr3
159	andicc		gr3,#SDRAMC_DSTS_SSI,gr3,icc0
160	bne		icc0,#2,3b
161
162#if 0
163	li		0x0100000,gr10
1644:	subicc		gr10,#1,gr10,icc0
165
166	bne		icc0,#0,4b
167#endif
168
169__cmode_icache_lock_end:
170
171	li		#__cmode_icache_lock_start,gr3
172	li		#__cmode_icache_lock_end,gr4
173
1744:	icul		gr3
175	addi		gr3,#L1_CACHE_BYTES,gr3
176	cmp		gr4,gr3,icc0
177	bhi		icc0,#0,4b
178
179#if 0 // Fujitsu recommend to skip this and will update docs.
180	# (15) Release the interrupt mask setting of the MASK register of
181	# the interrupt controller if necessary.
182	sti		gr13,@(gr12,#0)
183#endif
184	# (16) Set  1' in the PSR.ET bit, and permit interrupt.
185	movgs		gr14,psr
186
187	bralr
188
189	.size		frv_change_cmode, .-frv_change_cmode
190