1menu "RealView platform type"
2	depends on ARCH_REALVIEW
3
4config REALVIEW_DT
5	bool "Support RealView(R) Device Tree based boot"
6	select ARM_GIC
7	select MFD_SYSCON
8	select POWER_RESET
9	select POWER_RESET_VERSATILE
10	select POWER_SUPPLY
11	select SOC_REALVIEW
12	select USE_OF
13	help
14	  Include support for booting the ARM(R) RealView(R) evaluation
15	  boards using a device tree machine description.
16
17config MACH_REALVIEW_EB
18	bool "Support RealView(R) Emulation Baseboard"
19	select ARM_GIC
20	help
21	  Include support for the ARM(R) RealView(R) Emulation Baseboard
22	  platform.
23
24config REALVIEW_EB_A9MP
25	bool "Support Multicore Cortex-A9 Tile"
26	depends on MACH_REALVIEW_EB
27	select CPU_V7
28	select HAVE_ARM_SCU if SMP
29	select HAVE_ARM_TWD if SMP
30	select HAVE_SMP
31	select MIGHT_HAVE_CACHE_L2X0
32	help
33	  Enable support for the Cortex-A9MPCore tile fitted to the
34	  Realview(R) Emulation Baseboard platform.
35
36config REALVIEW_EB_ARM11MP
37	bool "Support ARM11MPCore Tile"
38	depends on MACH_REALVIEW_EB
39	select ARCH_HAS_BARRIERS if SMP
40	select CPU_V6K
41	select HAVE_ARM_SCU if SMP
42	select HAVE_ARM_TWD if SMP
43	select HAVE_SMP
44	select MIGHT_HAVE_CACHE_L2X0
45	help
46	  Enable support for the ARM11MPCore tile fitted to the Realview(R)
47	  Emulation Baseboard platform.
48
49config REALVIEW_EB_ARM11MP_REVB
50	bool "Support ARM11MPCore RevB Tile"
51	depends on REALVIEW_EB_ARM11MP
52	help
53	  Enable support for the ARM11MPCore Revision B tile on the
54	  Realview(R) Emulation Baseboard platform. Since there are device
55	  address differences, a kernel built with this option enabled is
56	  not compatible with other revisions of the ARM11MPCore tile.
57
58config MACH_REALVIEW_PB11MP
59	bool "Support RealView(R) Platform Baseboard for ARM11MPCore"
60	select ARCH_HAS_BARRIERS if SMP
61	select ARM_GIC
62	select CPU_V6K
63	select HAVE_ARM_SCU if SMP
64	select HAVE_ARM_TWD if SMP
65	select HAVE_PATA_PLATFORM
66	select HAVE_SMP
67	select MIGHT_HAVE_CACHE_L2X0
68	help
69	  Include support for the ARM(R) RealView(R) Platform Baseboard for
70	  the ARM11MPCore.  This platform has an on-board ARM11MPCore and has
71	  support for PCI-E and Compact Flash.
72
73# ARMv6 CPU without K extensions, but does have the new exclusive ops
74config MACH_REALVIEW_PB1176
75	bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S"
76	select ARM_GIC
77	select CPU_V6
78	select HAVE_TCM
79	select MIGHT_HAVE_CACHE_L2X0
80	help
81	  Include support for the ARM(R) RealView(R) Platform Baseboard for
82	  ARM1176JZF-S.
83
84config REALVIEW_PB1176_SECURE_FLASH
85	bool "Allow access to the secure flash memory block"
86	depends on MACH_REALVIEW_PB1176
87	default n
88	help
89	  Select this option if Linux will only run in secure mode on the
90	  RealView PB1176 platform and access to the secure flash memory
91	  block (64MB @ 0x3c000000) is required.
92
93config MACH_REALVIEW_PBA8
94	bool "Support RealView(R) Platform Baseboard for Cortex(tm)-A8 platform"
95	select ARM_GIC
96	select CPU_V7
97	select HAVE_PATA_PLATFORM
98	help
99	  Include support for the ARM(R) RealView Platform Baseboard for
100	  Cortex(tm)-A8.  This platform has an on-board Cortex-A8 and has
101	  support for PCI-E and Compact Flash.
102
103config MACH_REALVIEW_PBX
104	bool "Support RealView(R) Platform Baseboard Explore"
105	select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET
106	select ARM_GIC
107	select HAVE_ARM_SCU if SMP
108	select HAVE_ARM_TWD if SMP
109	select HAVE_PATA_PLATFORM
110	select HAVE_SMP
111	select MIGHT_HAVE_CACHE_L2X0
112	select ZONE_DMA if SPARSEMEM
113	help
114	  Include support for the ARM(R) RealView(R) Platform Baseboard
115	  Explore.
116
117config REALVIEW_HIGH_PHYS_OFFSET
118	bool "High physical base address for the RealView platform"
119	depends on MMU && !MACH_REALVIEW_PB1176
120	default y
121	help
122	  RealView boards other than PB1176 have the RAM available at
123	  0x70000000, 256MB of which being mirrored at 0x00000000. If
124	  the board supports 512MB of RAM, this option allows the
125	  memory to be accessed contiguously at the high physical
126	  offset. On the PBX board, disabling this option allows 1GB of
127	  RAM to be used with SPARSEMEM.
128
129endmenu
130