1/*
2 * PXA27x standby mode
3 *
4 * Author: David Burrage
5 *
6 * 2005 (c) MontaVista Software, Inc. This file is licensed under
7 * the terms of the GNU General Public License version 2. This program
8 * is licensed "as is" without any warranty of any kind, whether express
9 * or implied.
10 */
11
12#include <linux/linkage.h>
13#include <asm/assembler.h>
14#include <mach/hardware.h>
15
16#include <mach/pxa2xx-regs.h>
17
18		.text
19
20#ifdef CONFIG_PXA27x
21ENTRY(pxa_cpu_standby)
22	ldr	r0, =PSSR
23	mov	r1, #(PSSR_PH | PSSR_STS)
24	mov	r2, #PWRMODE_STANDBY
25	mov	r3, #UNCACHED_PHYS_0	@ Read mem context in.
26	ldr	ip, [r3]
27	b	1f
28
29	.align	5
301:	mcr	p14, 0, r2, c7, c0, 0	@ put the system into Standby
31	str	r1, [r0]		@ make sure PSSR_PH/STS are clear
32	ret	lr
33
34#endif
35
36#ifdef CONFIG_PXA3xx
37
38#define PXA3_MDCNFG		0x0000
39#define PXA3_MDCNFG_DMCEN	(1 << 30)
40#define PXA3_DDR_HCAL		0x0060
41#define PXA3_DDR_HCAL_HCRNG	0x1f
42#define PXA3_DDR_HCAL_HCPROG	(1 << 28)
43#define PXA3_DDR_HCAL_HCEN	(1 << 31)
44#define PXA3_DMCIER		0x0070
45#define PXA3_DMCIER_EDLP	(1 << 29)
46#define PXA3_DMCISR		0x0078
47#define PXA3_RCOMP		0x0100
48#define PXA3_RCOMP_SWEVAL	(1 << 31)
49
50ENTRY(pm_enter_standby_start)
51	mov	r1, #0xf6000000			@ DMEMC_REG_BASE (PXA3_MDCNFG)
52	add	r1, r1, #0x00100000
53
54	/*
55	 * Preload the TLB entry for accessing the dynamic memory
56	 * controller registers.  Note that page table lookups will
57	 * fail until the dynamic memory controller has been
58	 * reinitialised - and that includes MMU page table walks.
59	 * This also means that only the dynamic memory controller
60	 * can be reliably accessed in the code following standby.
61	 */
62	ldr	r2, [r1]			@ Dummy read PXA3_MDCNFG
63
64	mcr	p14, 0, r0, c7, c0, 0
65	.rept	8
66	nop
67	.endr
68
69	ldr	r0, [r1, #PXA3_DDR_HCAL]	@ Clear (and wait for) HCEN
70	bic	r0, r0, #PXA3_DDR_HCAL_HCEN
71	str	r0, [r1, #PXA3_DDR_HCAL]
721:	ldr	r0, [r1, #PXA3_DDR_HCAL]
73	tst	r0, #PXA3_DDR_HCAL_HCEN
74	bne	1b
75
76	ldr	r0, [r1, #PXA3_RCOMP]		@ Initiate RCOMP
77	orr	r0, r0, #PXA3_RCOMP_SWEVAL
78	str	r0, [r1, #PXA3_RCOMP]
79
80	mov	r0, #~0				@ Clear interrupts
81	str	r0, [r1, #PXA3_DMCISR]
82
83	ldr	r0, [r1, #PXA3_DMCIER]		@ set DMIER[EDLP]
84	orr	r0, r0, #PXA3_DMCIER_EDLP
85	str	r0, [r1, #PXA3_DMCIER]
86
87	ldr	r0, [r1, #PXA3_DDR_HCAL]	@ clear HCRNG, set HCPROG, HCEN
88	bic	r0, r0, #PXA3_DDR_HCAL_HCRNG
89	orr	r0, r0, #PXA3_DDR_HCAL_HCEN | PXA3_DDR_HCAL_HCPROG
90	str	r0, [r1, #PXA3_DDR_HCAL]
91
921:	ldr	r0, [r1, #PXA3_DMCISR]
93	tst	r0, #PXA3_DMCIER_EDLP
94	beq	1b
95
96	ldr	r0, [r1, #PXA3_MDCNFG]		@ set PXA3_MDCNFG[DMCEN]
97	orr	r0, r0, #PXA3_MDCNFG_DMCEN
98	str	r0, [r1, #PXA3_MDCNFG]
991:	ldr	r0, [r1, #PXA3_MDCNFG]
100	tst	r0, #PXA3_MDCNFG_DMCEN
101	beq	1b
102
103	ldr	r0, [r1, #PXA3_DDR_HCAL]	@ set PXA3_DDR_HCAL[HCRNG]
104	orr	r0, r0, #2 @ HCRNG
105	str	r0, [r1, #PXA3_DDR_HCAL]
106
107	ldr	r0, [r1, #PXA3_DMCIER]		@ Clear the interrupt
108	bic	r0, r0, #0x20000000
109	str	r0, [r1, #PXA3_DMCIER]
110
111	ret	lr
112ENTRY(pm_enter_standby_end)
113
114#endif
115