1/*
2 * OMAP2/3 PRM module functions
3 *
4 * Copyright (C) 2010-2011 Texas Instruments, Inc.
5 * Copyright (C) 2010 Nokia Corporation
6 * Benoît Cousson
7 * Paul Walmsley
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12 */
13
14#include <linux/kernel.h>
15#include <linux/errno.h>
16#include <linux/err.h>
17#include <linux/io.h>
18
19#include "powerdomain.h"
20#include "prm2xxx_3xxx.h"
21#include "prm-regbits-24xx.h"
22#include "clockdomain.h"
23
24/**
25 * omap2_prm_is_hardreset_asserted - read the HW reset line state of
26 * submodules contained in the hwmod module
27 * @shift: register bit shift corresponding to the reset line to check
28 * @part: PRM partition, ignored for OMAP2
29 * @prm_mod: PRM submodule base (e.g. CORE_MOD)
30 * @offset: register offset, ignored for OMAP2
31 *
32 * Returns 1 if the (sub)module hardreset line is currently asserted,
33 * 0 if the (sub)module hardreset line is not currently asserted, or
34 * -EINVAL if called while running on a non-OMAP2/3 chip.
35 */
36int omap2_prm_is_hardreset_asserted(u8 shift, u8 part, s16 prm_mod, u16 offset)
37{
38	return omap2_prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTCTRL,
39				       (1 << shift));
40}
41
42/**
43 * omap2_prm_assert_hardreset - assert the HW reset line of a submodule
44 * @shift: register bit shift corresponding to the reset line to assert
45 * @part: PRM partition, ignored for OMAP2
46 * @prm_mod: PRM submodule base (e.g. CORE_MOD)
47 * @offset: register offset, ignored for OMAP2
48 *
49 * Some IPs like dsp or iva contain processors that require an HW
50 * reset line to be asserted / deasserted in order to fully enable the
51 * IP.  These modules may have multiple hard-reset lines that reset
52 * different 'submodules' inside the IP block.  This function will
53 * place the submodule into reset.  Returns 0 upon success or -EINVAL
54 * upon an argument error.
55 */
56int omap2_prm_assert_hardreset(u8 shift, u8 part, s16 prm_mod, u16 offset)
57{
58	u32 mask;
59
60	mask = 1 << shift;
61	omap2_prm_rmw_mod_reg_bits(mask, mask, prm_mod, OMAP2_RM_RSTCTRL);
62
63	return 0;
64}
65
66/**
67 * omap2_prm_deassert_hardreset - deassert a submodule hardreset line and wait
68 * @prm_mod: PRM submodule base (e.g. CORE_MOD)
69 * @rst_shift: register bit shift corresponding to the reset line to deassert
70 * @st_shift: register bit shift for the status of the deasserted submodule
71 * @part: PRM partition, not used for OMAP2
72 * @prm_mod: PRM submodule base (e.g. CORE_MOD)
73 * @rst_offset: reset register offset, not used for OMAP2
74 * @st_offset: reset status register offset, not used for OMAP2
75 *
76 * Some IPs like dsp or iva contain processors that require an HW
77 * reset line to be asserted / deasserted in order to fully enable the
78 * IP.  These modules may have multiple hard-reset lines that reset
79 * different 'submodules' inside the IP block.  This function will
80 * take the submodule out of reset and wait until the PRCM indicates
81 * that the reset has completed before returning.  Returns 0 upon success or
82 * -EINVAL upon an argument error, -EEXIST if the submodule was already out
83 * of reset, or -EBUSY if the submodule did not exit reset promptly.
84 */
85int omap2_prm_deassert_hardreset(u8 rst_shift, u8 st_shift, u8 part,
86				 s16 prm_mod, u16 rst_offset, u16 st_offset)
87{
88	u32 rst, st;
89	int c;
90
91	rst = 1 << rst_shift;
92	st = 1 << st_shift;
93
94	/* Check the current status to avoid de-asserting the line twice */
95	if (omap2_prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTCTRL, rst) == 0)
96		return -EEXIST;
97
98	/* Clear the reset status by writing 1 to the status bit */
99	omap2_prm_rmw_mod_reg_bits(0xffffffff, st, prm_mod, OMAP2_RM_RSTST);
100	/* de-assert the reset control line */
101	omap2_prm_rmw_mod_reg_bits(rst, 0, prm_mod, OMAP2_RM_RSTCTRL);
102	/* wait the status to be set */
103	omap_test_timeout(omap2_prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTST,
104						  st),
105			  MAX_MODULE_HARDRESET_WAIT, c);
106
107	return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0;
108}
109
110
111/* Powerdomain low-level functions */
112
113/* Common functions across OMAP2 and OMAP3 */
114int omap2_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
115								u8 pwrst)
116{
117	u32 m;
118
119	m = omap2_pwrdm_get_mem_bank_onstate_mask(bank);
120
121	omap2_prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)), pwrdm->prcm_offs,
122				   OMAP2_PM_PWSTCTRL);
123
124	return 0;
125}
126
127int omap2_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank,
128								u8 pwrst)
129{
130	u32 m;
131
132	m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
133
134	omap2_prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)), pwrdm->prcm_offs,
135				   OMAP2_PM_PWSTCTRL);
136
137	return 0;
138}
139
140int omap2_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
141{
142	u32 m;
143
144	m = omap2_pwrdm_get_mem_bank_stst_mask(bank);
145
146	return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, OMAP2_PM_PWSTST,
147					     m);
148}
149
150int omap2_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
151{
152	u32 m;
153
154	m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
155
156	return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
157					     OMAP2_PM_PWSTCTRL, m);
158}
159
160int omap2_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
161{
162	u32 v;
163
164	v = pwrst << __ffs(OMAP_LOGICRETSTATE_MASK);
165	omap2_prm_rmw_mod_reg_bits(OMAP_LOGICRETSTATE_MASK, v, pwrdm->prcm_offs,
166				   OMAP2_PM_PWSTCTRL);
167
168	return 0;
169}
170
171int omap2_pwrdm_wait_transition(struct powerdomain *pwrdm)
172{
173	u32 c = 0;
174
175	/*
176	 * REVISIT: pwrdm_wait_transition() may be better implemented
177	 * via a callback and a periodic timer check -- how long do we expect
178	 * powerdomain transitions to take?
179	 */
180
181	/* XXX Is this udelay() value meaningful? */
182	while ((omap2_prm_read_mod_reg(pwrdm->prcm_offs, OMAP2_PM_PWSTST) &
183		OMAP_INTRANSITION_MASK) &&
184		(c++ < PWRDM_TRANSITION_BAILOUT))
185			udelay(1);
186
187	if (c > PWRDM_TRANSITION_BAILOUT) {
188		pr_err("powerdomain: %s: waited too long to complete transition\n",
189		       pwrdm->name);
190		return -EAGAIN;
191	}
192
193	pr_debug("powerdomain: completed transition in %d loops\n", c);
194
195	return 0;
196}
197
198int omap2_clkdm_add_wkdep(struct clockdomain *clkdm1,
199			  struct clockdomain *clkdm2)
200{
201	omap2_prm_set_mod_reg_bits((1 << clkdm2->dep_bit),
202				   clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP);
203	return 0;
204}
205
206int omap2_clkdm_del_wkdep(struct clockdomain *clkdm1,
207			  struct clockdomain *clkdm2)
208{
209	omap2_prm_clear_mod_reg_bits((1 << clkdm2->dep_bit),
210				     clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP);
211	return 0;
212}
213
214int omap2_clkdm_read_wkdep(struct clockdomain *clkdm1,
215			   struct clockdomain *clkdm2)
216{
217	return omap2_prm_read_mod_bits_shift(clkdm1->pwrdm.ptr->prcm_offs,
218					     PM_WKDEP, (1 << clkdm2->dep_bit));
219}
220
221/* XXX Caller must hold the clkdm's powerdomain lock */
222int omap2_clkdm_clear_all_wkdeps(struct clockdomain *clkdm)
223{
224	struct clkdm_dep *cd;
225	u32 mask = 0;
226
227	for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) {
228		if (!cd->clkdm)
229			continue; /* only happens if data is erroneous */
230
231		/* PRM accesses are slow, so minimize them */
232		mask |= 1 << cd->clkdm->dep_bit;
233		cd->wkdep_usecount = 0;
234	}
235
236	omap2_prm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs,
237				     PM_WKDEP);
238	return 0;
239}
240
241