1/*
2 * arch/arm/mach-ks8695/board-acs5k.c
3 *
4 * Brivo Systems LLC, ACS-5000 Master Board
5 *
6 * Copyright 2008 Simtec Electronics
7 *		  Daniel Silverstone <dsilvers@simtec.co.uk>
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12 */
13#include <linux/gpio.h>
14#include <linux/kernel.h>
15#include <linux/types.h>
16#include <linux/interrupt.h>
17#include <linux/init.h>
18#include <linux/platform_device.h>
19
20#include <linux/i2c.h>
21#include <linux/i2c-algo-bit.h>
22#include <linux/i2c-gpio.h>
23#include <linux/platform_data/pca953x.h>
24
25#include <linux/mtd/mtd.h>
26#include <linux/mtd/map.h>
27#include <linux/mtd/physmap.h>
28#include <linux/mtd/partitions.h>
29
30#include <asm/mach-types.h>
31
32#include <asm/mach/arch.h>
33#include <asm/mach/map.h>
34#include <asm/mach/irq.h>
35
36#include <mach/devices.h>
37#include <mach/gpio-ks8695.h>
38
39#include "generic.h"
40
41static struct i2c_gpio_platform_data acs5k_i2c_device_platdata = {
42	.sda_pin	= 4,
43	.scl_pin	= 5,
44	.udelay		= 10,
45};
46
47static struct platform_device acs5k_i2c_device = {
48	.name		= "i2c-gpio",
49	.id		= -1,
50	.num_resources	= 0,
51	.resource	= NULL,
52	.dev		= {
53		.platform_data	= &acs5k_i2c_device_platdata,
54	},
55};
56
57static int acs5k_pca9555_setup(struct i2c_client *client,
58			       unsigned gpio_base, unsigned ngpio,
59			       void *context)
60{
61	static int acs5k_gpio_value[] = {
62		-1, -1, -1, -1, -1, -1, -1, 0, 1, 1, -1, 0, 1, 0, -1, -1
63	};
64	int n;
65
66	for (n = 0; n < ARRAY_SIZE(acs5k_gpio_value); ++n) {
67		gpio_request(gpio_base + n, "ACS-5000 GPIO Expander");
68		if (acs5k_gpio_value[n] < 0)
69			gpio_direction_input(gpio_base + n);
70		else
71			gpio_direction_output(gpio_base + n,
72					      acs5k_gpio_value[n]);
73		gpio_export(gpio_base + n, 0); /* Export, direction locked down */
74	}
75
76	return 0;
77}
78
79static struct pca953x_platform_data acs5k_i2c_pca9555_platdata = {
80	.gpio_base	= 16, /* Start directly after the CPU's GPIO */
81	.invert		= 0, /* Do not invert */
82	.setup		= acs5k_pca9555_setup,
83};
84
85static struct i2c_board_info acs5k_i2c_devs[] __initdata = {
86	{
87		I2C_BOARD_INFO("pcf8563", 0x51),
88	},
89	{
90		I2C_BOARD_INFO("pca9555", 0x20),
91		.platform_data = &acs5k_i2c_pca9555_platdata,
92	},
93};
94
95static void acs5k_i2c_init(void)
96{
97	/* The gpio interface */
98	platform_device_register(&acs5k_i2c_device);
99	/* I2C devices */
100	i2c_register_board_info(0, acs5k_i2c_devs,
101				ARRAY_SIZE(acs5k_i2c_devs));
102}
103
104static struct mtd_partition acs5k_nor_partitions[] = {
105	[0] = {
106		.name	= "Boot Agent and config",
107		.size	= SZ_256K,
108		.offset	= 0,
109		.mask_flags = MTD_WRITEABLE,
110	},
111	[1] = {
112		.name	= "Kernel",
113		.size	= SZ_1M,
114		.offset	= SZ_256K,
115	},
116	[2] = {
117		.name	= "SquashFS1",
118		.size	= SZ_2M,
119		.offset	= SZ_256K + SZ_1M,
120	},
121	[3] = {
122		.name	= "SquashFS2",
123		.size	= SZ_4M + SZ_2M,
124		.offset	= SZ_256K + SZ_1M + SZ_2M,
125	},
126	[4] = {
127		.name	= "Data",
128		.size	= SZ_16M + SZ_4M + SZ_2M + SZ_512K, /* 22.5 MB */
129		.offset	= SZ_256K + SZ_8M + SZ_1M,
130	}
131};
132
133static struct physmap_flash_data acs5k_nor_pdata = {
134	.width		= 4,
135	.nr_parts	= ARRAY_SIZE(acs5k_nor_partitions),
136	.parts		= acs5k_nor_partitions,
137};
138
139static struct resource acs5k_nor_resource[] = {
140	[0] = {
141		.start = SZ_32M, /* We expect the bootloader to map
142				  * the flash here.
143				  */
144		.end   = SZ_32M + SZ_16M - 1,
145		.flags = IORESOURCE_MEM,
146	},
147	[1] = {
148		.start = SZ_32M + SZ_16M,
149		.end   = SZ_32M + SZ_32M - SZ_256K - 1,
150		.flags = IORESOURCE_MEM,
151	}
152};
153
154static struct platform_device acs5k_device_nor = {
155	.name		= "physmap-flash",
156	.id		= -1,
157	.num_resources	= ARRAY_SIZE(acs5k_nor_resource),
158	.resource	= acs5k_nor_resource,
159	.dev		= {
160		.platform_data = &acs5k_nor_pdata,
161	},
162};
163
164static void __init acs5k_register_nor(void)
165{
166	int ret;
167
168	if (acs5k_nor_partitions[0].mask_flags == 0)
169		printk(KERN_WARNING "Warning: Unprotecting bootloader and configuration partition\n");
170
171	ret = platform_device_register(&acs5k_device_nor);
172	if (ret < 0)
173		printk(KERN_ERR "failed to register physmap-flash device\n");
174}
175
176static int __init acs5k_protection_setup(char *s)
177{
178	/* We can't allocate anything here but we should be able
179	 * to trivially parse s and decide if we can protect the
180	 * bootloader partition or not
181	 */
182	if (strcmp(s, "no") == 0)
183		acs5k_nor_partitions[0].mask_flags = 0;
184
185	return 1;
186}
187
188__setup("protect_bootloader=", acs5k_protection_setup);
189
190static void __init acs5k_init_gpio(void)
191{
192	int i;
193
194	ks8695_register_gpios();
195	for (i = 0; i < 4; ++i)
196		gpio_request(i, "ACS5K IRQ");
197	gpio_request(7, "ACS5K KS_FRDY");
198	for (i = 8; i < 16; ++i)
199		gpio_request(i, "ACS5K Unused");
200
201	gpio_request(3, "ACS5K CAN Control");
202	gpio_request(6, "ACS5K Heartbeat");
203	gpio_direction_output(3, 1); /* Default CAN_RESET high */
204	gpio_direction_output(6, 0); /* Default KS8695_ACTIVE low */
205	gpio_export(3, 0); /* export CAN_RESET as output only */
206	gpio_export(6, 0); /* export KS8695_ACTIVE as output only */
207}
208
209static void __init acs5k_init(void)
210{
211	acs5k_init_gpio();
212
213	/* Network device */
214	ks8695_add_device_lan();	/* eth0 = LAN */
215	ks8695_add_device_wan();	/* ethX = WAN */
216
217	/* NOR devices */
218	acs5k_register_nor();
219
220	/* I2C bus */
221	acs5k_i2c_init();
222}
223
224MACHINE_START(ACS5K, "Brivo Systems LLC ACS-5000 Master board")
225	/* Maintainer: Simtec Electronics. */
226	.atag_offset	= 0x100,
227	.map_io		= ks8695_map_io,
228	.init_irq	= ks8695_init_irq,
229	.init_machine	= acs5k_init,
230	.init_time	= ks8695_timer_init,
231	.restart	= ks8695_restart,
232MACHINE_END
233