1/* 2 * Copyright (c) 2014 SUSE LINUX Products GmbH 3 * 4 * Derived from zynq-zed.dts: 5 * 6 * Copyright (C) 2011 Xilinx 7 * Copyright (C) 2012 National Instruments Corp. 8 * Copyright (C) 2013 Xilinx 9 * 10 * This software is licensed under the terms of the GNU General Public 11 * License version 2, as published by the Free Software Foundation, and 12 * may be copied, distributed, and modified under those terms. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 */ 19/dts-v1/; 20/include/ "zynq-7000.dtsi" 21 22/ { 23 model = "Adapteva Parallella Board"; 24 compatible = "adapteva,parallella", "xlnx,zynq-7000"; 25 26 memory { 27 device_type = "memory"; 28 reg = <0x0 0x40000000>; 29 }; 30 31 chosen { 32 bootargs = "console=ttyPS0,115200 earlyprintk root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait"; 33 linux,stdout-path = "/amba/serial@e0001000"; 34 }; 35}; 36 37&clkc { 38 fclk-enable = <0xf>; 39 ps-clk-frequency = <33333333>; 40}; 41 42&gem0 { 43 status = "okay"; 44 phy-mode = "rgmii-id"; 45 phy-handle = <ðernet_phy>; 46 47 ethernet_phy: ethernet-phy@0 { 48 /* Marvell 88E1318 */ 49 compatible = "ethernet-phy-id0141.0e90", 50 "ethernet-phy-ieee802.3-c22"; 51 reg = <0>; 52 marvell,reg-init = <0x3 0x10 0xff00 0x1e>, 53 <0x3 0x11 0xfff0 0xa>; 54 }; 55}; 56 57&i2c0 { 58 status = "okay"; 59 60 isl9305: isl9305@68 { 61 compatible = "isil,isl9305"; 62 reg = <0x68>; 63 64 regulators { 65 dcd1 { 66 regulator-name = "VDD_DSP"; 67 regulator-always-on; 68 }; 69 dcd2 { 70 regulator-name = "1P35V"; 71 regulator-always-on; 72 }; 73 ldo1 { 74 regulator-name = "VDD_ADJ"; 75 }; 76 ldo2 { 77 regulator-name = "VDD_GPIO"; 78 regulator-always-on; 79 }; 80 }; 81 }; 82}; 83 84&sdhci1 { 85 status = "okay"; 86}; 87 88&uart1 { 89 status = "okay"; 90}; 91