1/*
2 * Copyright 2013 Freescale Semiconductor, Inc.
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License as published by
6 * the Free Software Foundation; either version 2 of the License, or
7 * (at your option) any later version.
8 */
9
10/dts-v1/;
11#include "vf610.dtsi"
12
13/ {
14	model = "VF610 Tower Board";
15	compatible = "fsl,vf610-twr", "fsl,vf610";
16
17	chosen {
18		bootargs = "console=ttyLP1,115200";
19	};
20
21	memory {
22		reg = <0x80000000 0x8000000>;
23	};
24
25	audio_ext: mclk_osc {
26		compatible = "fixed-clock";
27		#clock-cells = <0>;
28		clock-frequency = <24576000>;
29	};
30
31	enet_ext: eth_osc {
32		compatible = "fixed-clock";
33		#clock-cells = <0>;
34		clock-frequency = <50000000>;
35	};
36
37	regulators {
38		compatible = "simple-bus";
39		#address-cells = <1>;
40		#size-cells = <0>;
41
42		reg_3p3v: regulator@0 {
43			compatible = "regulator-fixed";
44			reg = <0>;
45			regulator-name = "3P3V";
46			regulator-min-microvolt = <3300000>;
47			regulator-max-microvolt = <3300000>;
48			regulator-always-on;
49		};
50
51		reg_vcc_3v3_mcu: regulator@1 {
52			compatible = "regulator-fixed";
53			reg = <1>;
54			regulator-name = "vcc_3v3_mcu";
55			regulator-min-microvolt = <3300000>;
56			regulator-max-microvolt = <3300000>;
57		};
58	};
59
60	sound {
61		compatible = "simple-audio-card";
62		simple-audio-card,format = "i2s";
63		simple-audio-card,widgets =
64			"Microphone", "Microphone Jack",
65			"Headphone", "Headphone Jack",
66			"Speaker", "Speaker Ext",
67			"Line", "Line In Jack";
68		simple-audio-card,routing =
69			"MIC_IN", "Microphone Jack",
70			"Microphone Jack", "Mic Bias",
71			"LINE_IN", "Line In Jack",
72			"Headphone Jack", "HP_OUT",
73			"Speaker Ext", "LINE_OUT";
74
75		simple-audio-card,cpu {
76			sound-dai = <&sai2>;
77			frame-master;
78			bitclock-master;
79		};
80
81		simple-audio-card,codec {
82			sound-dai = <&codec>;
83			frame-master;
84			bitclock-master;
85		};
86	};
87};
88
89&adc0 {
90	pinctrl-names = "default";
91	pinctrl-0 = <&pinctrl_adc0_ad5>;
92	vref-supply = <&reg_vcc_3v3_mcu>;
93	status = "okay";
94};
95
96&clks {
97	clocks = <&sxosc>, <&fxosc>, <&enet_ext>, <&audio_ext>;
98	clock-names = "sxosc", "fxosc", "enet_ext", "audio_ext";
99};
100
101&dspi0 {
102	bus-num = <0>;
103	pinctrl-names = "default";
104	pinctrl-0 = <&pinctrl_dspi0>;
105	status = "okay";
106
107	sflash: at26df081a@0 {
108		#address-cells = <1>;
109		#size-cells = <1>;
110		compatible = "atmel,at26df081a";
111		spi-max-frequency = <16000000>;
112		spi-cpol;
113		spi-cpha;
114		reg = <0>;
115	};
116};
117
118&edma0 {
119	status = "okay";
120};
121
122&esdhc1 {
123	pinctrl-names = "default";
124	pinctrl-0 = <&pinctrl_esdhc1>;
125	bus-width = <4>;
126	cd-gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;
127	status = "okay";
128};
129
130&fec0 {
131	phy-mode = "rmii";
132	phy-handle = <&ethphy0>;
133	pinctrl-names = "default";
134	pinctrl-0 = <&pinctrl_fec0>;
135	status = "okay";
136
137	mdio {
138		#address-cells = <1>;
139		#size-cells = <0>;
140
141		ethphy0: ethernet-phy@0 {
142			reg = <0>;
143		};
144
145		ethphy1: ethernet-phy@1 {
146			reg = <1>;
147		};
148	};
149};
150
151&fec1 {
152	phy-mode = "rmii";
153	phy-handle = <&ethphy1>;
154	pinctrl-names = "default";
155	pinctrl-0 = <&pinctrl_fec1>;
156	status = "okay";
157};
158
159&i2c0 {
160	clock-frequency = <100000>;
161	pinctrl-names = "default";
162	pinctrl-0 = <&pinctrl_i2c0>;
163	status = "okay";
164
165	codec: sgtl5000@0a {
166	       #sound-dai-cells = <0>;
167	       compatible = "fsl,sgtl5000";
168	       reg = <0x0a>;
169	       VDDA-supply = <&reg_3p3v>;
170	       VDDIO-supply = <&reg_3p3v>;
171	       clocks = <&clks VF610_CLK_SAI2>;
172       };
173};
174
175&iomuxc {
176	vf610-twr {
177		pinctrl_adc0_ad5: adc0ad5grp {
178			fsl,pins = <
179				VF610_PAD_PTC30__ADC0_SE5		0xa1
180			>;
181		};
182
183		pinctrl_dspi0: dspi0grp {
184			fsl,pins = <
185				VF610_PAD_PTB19__DSPI0_CS0		0x1182
186				VF610_PAD_PTB20__DSPI0_SIN		0x1181
187				VF610_PAD_PTB21__DSPI0_SOUT		0x1182
188				VF610_PAD_PTB22__DSPI0_SCK		0x1182
189			>;
190		};
191
192		pinctrl_esdhc1: esdhc1grp {
193			fsl,pins = <
194				VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
195				VF610_PAD_PTA25__ESDHC1_CMD	0x31ef
196				VF610_PAD_PTA26__ESDHC1_DAT0	0x31ef
197				VF610_PAD_PTA27__ESDHC1_DAT1	0x31ef
198				VF610_PAD_PTA28__ESDHC1_DATA2	0x31ef
199				VF610_PAD_PTA29__ESDHC1_DAT3	0x31ef
200				VF610_PAD_PTA7__GPIO_134	0x219d
201			>;
202		};
203
204		pinctrl_fec0: fec0grp {
205			fsl,pins = <
206				VF610_PAD_PTA6__RMII_CLKIN		0x30d1
207				VF610_PAD_PTC0__ENET_RMII0_MDC		0x30d3
208				VF610_PAD_PTC1__ENET_RMII0_MDIO		0x30d1
209				VF610_PAD_PTC2__ENET_RMII0_CRS		0x30d1
210				VF610_PAD_PTC3__ENET_RMII0_RXD1		0x30d1
211				VF610_PAD_PTC4__ENET_RMII0_RXD0		0x30d1
212				VF610_PAD_PTC5__ENET_RMII0_RXER		0x30d1
213				VF610_PAD_PTC6__ENET_RMII0_TXD1		0x30d2
214				VF610_PAD_PTC7__ENET_RMII0_TXD0		0x30d2
215				VF610_PAD_PTC8__ENET_RMII0_TXEN		0x30d2
216			>;
217		};
218
219		pinctrl_fec1: fec1grp {
220			fsl,pins = <
221				VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
222				VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
223				VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
224				VF610_PAD_PTC12__ENET_RMII_RXD1		0x30d1
225				VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
226				VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
227				VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
228				VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
229				VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
230			>;
231		};
232
233		pinctrl_i2c0: i2c0grp {
234			fsl,pins = <
235				VF610_PAD_PTB14__I2C0_SCL		0x30d3
236				VF610_PAD_PTB15__I2C0_SDA		0x30d3
237			>;
238		};
239
240		pinctrl_pwm0: pwm0grp {
241			fsl,pins = <
242				VF610_PAD_PTB0__FTM0_CH0		0x1582
243				VF610_PAD_PTB1__FTM0_CH1		0x1582
244				VF610_PAD_PTB2__FTM0_CH2		0x1582
245				VF610_PAD_PTB3__FTM0_CH3		0x1582
246			>;
247		};
248
249		pinctrl_sai2: sai2grp {
250			fsl,pins = <
251				VF610_PAD_PTA16__SAI2_TX_BCLK		0x02ed
252				VF610_PAD_PTA18__SAI2_TX_DATA		0x02ee
253				VF610_PAD_PTA19__SAI2_TX_SYNC		0x02ed
254				VF610_PAD_PTA21__SAI2_RX_BCLK		0x02ed
255				VF610_PAD_PTA22__SAI2_RX_DATA		0x02ed
256				VF610_PAD_PTA23__SAI2_RX_SYNC		0x02ed
257				VF610_PAD_PTB18__EXT_AUDIO_MCLK		0x02ed
258			>;
259		};
260
261		pinctrl_uart1: uart1grp {
262			fsl,pins = <
263				VF610_PAD_PTB4__UART1_TX		0x21a2
264				VF610_PAD_PTB5__UART1_RX		0x21a1
265			>;
266		};
267
268		pinctrl_uart2: uart2grp {
269			fsl,pins = <
270				VF610_PAD_PTB6__UART2_TX		0x21a2
271				VF610_PAD_PTB7__UART2_RX		0x21a1
272			>;
273		};
274	};
275};
276
277&pwm0 {
278	pinctrl-names = "default";
279	pinctrl-0 = <&pinctrl_pwm0>;
280	status = "okay";
281};
282
283&sai2 {
284	#sound-dai-cells = <0>;
285	pinctrl-names = "default";
286	pinctrl-0 = <&pinctrl_sai2>;
287	status = "okay";
288};
289
290&uart1 {
291	pinctrl-names = "default";
292	pinctrl-0 = <&pinctrl_uart1>;
293	status = "okay";
294};
295
296&uart2 {
297	pinctrl-names = "default";
298	pinctrl-0 = <&pinctrl_uart2>;
299	status = "okay";
300};
301
302&usbdev0 {
303	disable-over-current;
304	status = "okay";
305};
306
307&usbh1 {
308	disable-over-current;
309	status = "okay";
310};
311
312&usbmisc0 {
313	status = "okay";
314};
315
316&usbmisc1 {
317	status = "okay";
318};
319
320&usbphy0 {
321	status = "okay";
322};
323
324&usbphy1 {
325	status = "okay";
326};
327