1/*
2 * Copyright 2013-2014 Freescale Semiconductor, Inc.
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 *  a) This file is free software; you can redistribute it and/or
10 *     modify it under the terms of the GNU General Public License as
11 *     published by the Free Software Foundation; either version 2 of
12 *     the License, or (at your option) any later version.
13 *
14 *     This file is distributed in the hope that it will be useful,
15 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
16 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17 *     GNU General Public License for more details.
18 *
19 *     You should have received a copy of the GNU General Public
20 *     License along with this file; if not, write to the Free
21 *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
22 *     MA 02110-1301 USA
23 *
24 * Or, alternatively,
25 *
26 *  b) Permission is hereby granted, free of charge, to any person
27 *     obtaining a copy of this software and associated documentation
28 *     files (the "Software"), to deal in the Software without
29 *     restriction, including without limitation the rights to use,
30 *     copy, modify, merge, publish, distribute, sublicense, and/or
31 *     sell copies of the Software, and to permit persons to whom the
32 *     Software is furnished to do so, subject to the following
33 *     conditions:
34 *
35 *     The above copyright notice and this permission notice shall be
36 *     included in all copies or substantial portions of the Software.
37 *
38 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
39 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
40 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
41 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
42 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
43 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
44 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
45 *     OTHER DEALINGS IN THE SOFTWARE.
46 */
47
48/dts-v1/;
49#include "ls1021a.dtsi"
50
51/ {
52	model = "LS1021A TWR Board";
53
54	aliases {
55		enet2_rgmii_phy = &rgmii_phy1;
56		enet0_sgmii_phy = &sgmii_phy2;
57		enet1_sgmii_phy = &sgmii_phy0;
58	};
59};
60
61&dspi1 {
62	bus-num = <0>;
63	status = "okay";
64
65	dspiflash: s25fl064k@0 {
66		#address-cells = <1>;
67		#size-cells = <1>;
68		compatible = "spansion,s25fl064k";
69		spi-max-frequency = <16000000>;
70		spi-cpol;
71		spi-cpha;
72		reg = <0>;
73	};
74};
75
76&i2c0 {
77	status = "okay";
78};
79
80&i2c1 {
81	status = "okay";
82};
83
84&ifc {
85	#address-cells = <2>;
86	#size-cells = <1>;
87	/* NOR Flash on board */
88	ranges = <0x0 0x0 0x0 0x60000000 0x08000000>;
89	status = "okay";
90
91	nor@0,0 {
92		#address-cells = <1>;
93		#size-cells = <1>;
94		compatible = "cfi-flash";
95		reg = <0x0 0x0 0x8000000>;
96		bank-width = <2>;
97		device-width = <1>;
98	};
99};
100
101&lpuart0 {
102	status = "okay";
103};
104
105&mdio0 {
106	sgmii_phy0: ethernet-phy@0 {
107		reg = <0x0>;
108	};
109	rgmii_phy1: ethernet-phy@1 {
110		reg = <0x1>;
111	};
112	sgmii_phy2: ethernet-phy@2 {
113		reg = <0x2>;
114	};
115	tbi1: tbi-phy@1f {
116		reg = <0x1f>;
117		device_type = "tbi-phy";
118	};
119};
120
121&uart0 {
122	status = "okay";
123};
124
125&uart1 {
126	status = "okay";
127};
128