1/include/ "skeleton.dtsi"
2#include <dt-bindings/input/input.h>
3#include <dt-bindings/gpio/gpio.h>
4
5#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
6
7/ {
8	compatible = "marvell,kirkwood";
9	interrupt-parent = <&intc>;
10
11	cpus {
12		#address-cells = <1>;
13		#size-cells = <0>;
14
15		cpu@0 {
16			device_type = "cpu";
17			compatible = "marvell,feroceon";
18			reg = <0>;
19			clocks = <&core_clk 1>, <&core_clk 3>, <&gate_clk 11>;
20			clock-names = "cpu_clk", "ddrclk", "powersave";
21		};
22	};
23
24	aliases {
25	       gpio0 = &gpio0;
26	       gpio1 = &gpio1;
27	       i2c0 = &i2c0;
28	};
29
30	mbus {
31		compatible = "marvell,kirkwood-mbus", "simple-bus";
32		#address-cells = <2>;
33		#size-cells = <1>;
34		/* If a board file needs to change this ranges it must replace it completely */
35		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000	/* internal-regs */
36			  MBUS_ID(0x01, 0x2f) 0 0xf4000000 0x10000	/* nand flash */
37			  MBUS_ID(0x03, 0x01) 0 0xf5000000 0x10000	/* crypto sram */
38			  >;
39		controller = <&mbusc>;
40		pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */
41		pcie-io-aperture  = <0xf2000000 0x100000>;   /*   1 MiB    I/O space */
42
43		cesa: crypto@0301 {
44			compatible = "marvell,orion-crypto";
45			reg = <MBUS_ID(0xf0, 0x01) 0x30000 0x10000>,
46			      <MBUS_ID(0x03, 0x01) 0 0x800>;
47			reg-names = "regs", "sram";
48			interrupts = <22>;
49			clocks = <&gate_clk 17>;
50			status = "okay";
51		};
52
53		nand: nand@012f {
54			#address-cells = <1>;
55			#size-cells = <1>;
56			cle = <0>;
57			ale = <1>;
58			bank-width = <1>;
59			compatible = "marvell,orion-nand";
60			reg = <MBUS_ID(0x01, 0x2f) 0 0x400>;
61			chip-delay = <25>;
62			/* set partition map and/or chip-delay in board dts */
63			clocks = <&gate_clk 7>;
64			pinctrl-0 = <&pmx_nand>;
65			pinctrl-names = "default";
66			status = "disabled";
67		};
68	};
69
70	ocp@f1000000 {
71		compatible = "simple-bus";
72		ranges = <0x00000000 0xf1000000 0x0100000>;
73		#address-cells = <1>;
74		#size-cells = <1>;
75
76		pinctrl: pin-controller@10000 {
77			/* set compatible property in SoC file */
78			reg = <0x10000 0x20>;
79
80			pmx_ge1: pmx-ge1 {
81				marvell,pins = "mpp20", "mpp21", "mpp22", "mpp23",
82					       "mpp24", "mpp25", "mpp26", "mpp27",
83					       "mpp30", "mpp31", "mpp32", "mpp33";
84				marvell,function = "ge1";
85			};
86
87			pmx_nand: pmx-nand {
88				marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
89					       "mpp4", "mpp5", "mpp18", "mpp19";
90				marvell,function = "nand";
91			};
92
93			/*
94			 * Default SPI0 pinctrl setting with CSn on mpp0,
95			 * overwrite marvell,pins on board level if required.
96			 */
97			pmx_spi: pmx-spi {
98				marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3";
99				marvell,function = "spi";
100			};
101
102			pmx_twsi0: pmx-twsi0 {
103				marvell,pins = "mpp8", "mpp9";
104				marvell,function = "twsi0";
105			};
106
107			/*
108			 * Default UART pinctrl setting without RTS/CTS,
109			 * overwrite marvell,pins on board level if required.
110			 */
111			pmx_uart0: pmx-uart0 {
112				marvell,pins = "mpp10", "mpp11";
113				marvell,function = "uart0";
114			};
115
116			pmx_uart1: pmx-uart1 {
117				marvell,pins = "mpp13", "mpp14";
118				marvell,function = "uart1";
119			};
120		};
121
122		core_clk: core-clocks@10030 {
123			compatible = "marvell,kirkwood-core-clock";
124			reg = <0x10030 0x4>;
125			#clock-cells = <1>;
126		};
127
128		spi0: spi@10600 {
129			compatible = "marvell,orion-spi";
130			#address-cells = <1>;
131			#size-cells = <0>;
132			cell-index = <0>;
133			interrupts = <23>;
134			reg = <0x10600 0x28>;
135			clocks = <&gate_clk 7>;
136			pinctrl-0 = <&pmx_spi>;
137			pinctrl-names = "default";
138			status = "disabled";
139		};
140
141		gpio0: gpio@10100 {
142			compatible = "marvell,orion-gpio";
143			#gpio-cells = <2>;
144			gpio-controller;
145			reg = <0x10100 0x40>;
146			ngpios = <32>;
147			interrupt-controller;
148			#interrupt-cells = <2>;
149			interrupts = <35>, <36>, <37>, <38>;
150			clocks = <&gate_clk 7>;
151		};
152
153		gpio1: gpio@10140 {
154			compatible = "marvell,orion-gpio";
155			#gpio-cells = <2>;
156			gpio-controller;
157			reg = <0x10140 0x40>;
158			ngpios = <18>;
159			interrupt-controller;
160			#interrupt-cells = <2>;
161			interrupts = <39>, <40>, <41>;
162			clocks = <&gate_clk 7>;
163		};
164
165		i2c0: i2c@11000 {
166			compatible = "marvell,mv64xxx-i2c";
167			reg = <0x11000 0x20>;
168			#address-cells = <1>;
169			#size-cells = <0>;
170			interrupts = <29>;
171			clock-frequency = <100000>;
172			clocks = <&gate_clk 7>;
173			pinctrl-0 = <&pmx_twsi0>;
174			pinctrl-names = "default";
175			status = "disabled";
176		};
177
178		uart0: serial@12000 {
179			compatible = "ns16550a";
180			reg = <0x12000 0x100>;
181			reg-shift = <2>;
182			interrupts = <33>;
183			clocks = <&gate_clk 7>;
184			pinctrl-0 = <&pmx_uart0>;
185			pinctrl-names = "default";
186			status = "disabled";
187		};
188
189		uart1: serial@12100 {
190			compatible = "ns16550a";
191			reg = <0x12100 0x100>;
192			reg-shift = <2>;
193			interrupts = <34>;
194			clocks = <&gate_clk 7>;
195			pinctrl-0 = <&pmx_uart1>;
196			pinctrl-names = "default";
197			status = "disabled";
198		};
199
200		mbusc: mbus-controller@20000 {
201			compatible = "marvell,mbus-controller";
202			reg = <0x20000 0x80>, <0x1500 0x20>;
203		};
204
205		sysc: system-controller@20000 {
206			compatible = "marvell,orion-system-controller";
207			reg = <0x20000 0x120>;
208		};
209
210		bridge_intc: bridge-interrupt-ctrl@20110 {
211			compatible = "marvell,orion-bridge-intc";
212			interrupt-controller;
213			#interrupt-cells = <1>;
214			reg = <0x20110 0x8>;
215			interrupts = <1>;
216			marvell,#interrupts = <6>;
217		};
218
219		gate_clk: clock-gating-control@2011c {
220			compatible = "marvell,kirkwood-gating-clock";
221			reg = <0x2011c 0x4>;
222			clocks = <&core_clk 0>;
223			#clock-cells = <1>;
224		};
225
226		l2: l2-cache@20128 {
227			compatible = "marvell,kirkwood-cache";
228			reg = <0x20128 0x4>;
229		};
230
231		intc: main-interrupt-ctrl@20200 {
232			compatible = "marvell,orion-intc";
233			interrupt-controller;
234			#interrupt-cells = <1>;
235			reg = <0x20200 0x10>, <0x20210 0x10>;
236		};
237
238		timer: timer@20300 {
239			compatible = "marvell,orion-timer";
240			reg = <0x20300 0x20>;
241			interrupt-parent = <&bridge_intc>;
242			interrupts = <1>, <2>;
243			clocks = <&core_clk 0>;
244		};
245
246		wdt: watchdog-timer@20300 {
247			compatible = "marvell,orion-wdt";
248			reg = <0x20300 0x28>, <0x20108 0x4>;
249			interrupt-parent = <&bridge_intc>;
250			interrupts = <3>;
251			clocks = <&gate_clk 7>;
252			status = "okay";
253		};
254
255		usb0: ehci@50000 {
256			compatible = "marvell,orion-ehci";
257			reg = <0x50000 0x1000>;
258			interrupts = <19>;
259			clocks = <&gate_clk 3>;
260			status = "okay";
261		};
262
263		dma0: xor@60800 {
264			compatible = "marvell,orion-xor";
265			reg = <0x60800 0x100
266			       0x60A00 0x100>;
267			status = "okay";
268			clocks = <&gate_clk 8>;
269
270			xor00 {
271			      interrupts = <5>;
272			      dmacap,memcpy;
273			      dmacap,xor;
274			};
275			xor01 {
276			      interrupts = <6>;
277			      dmacap,memcpy;
278			      dmacap,xor;
279			      dmacap,memset;
280			};
281		};
282
283		dma1: xor@60900 {
284			compatible = "marvell,orion-xor";
285			reg = <0x60900 0x100
286			       0x60B00 0x100>;
287			status = "okay";
288			clocks = <&gate_clk 16>;
289
290			xor00 {
291			      interrupts = <7>;
292			      dmacap,memcpy;
293			      dmacap,xor;
294			};
295			xor01 {
296			      interrupts = <8>;
297			      dmacap,memcpy;
298			      dmacap,xor;
299			      dmacap,memset;
300			};
301		};
302
303		eth0: ethernet-controller@72000 {
304			compatible = "marvell,kirkwood-eth";
305			#address-cells = <1>;
306			#size-cells = <0>;
307			reg = <0x72000 0x4000>;
308			clocks = <&gate_clk 0>;
309			marvell,tx-checksum-limit = <1600>;
310			status = "disabled";
311
312			eth0port: ethernet0-port@0 {
313				compatible = "marvell,kirkwood-eth-port";
314				reg = <0>;
315				interrupts = <11>;
316				/* overwrite MAC address in bootloader */
317				local-mac-address = [00 00 00 00 00 00];
318				/* set phy-handle property in board file */
319			};
320		};
321
322		mdio: mdio-bus@72004 {
323			compatible = "marvell,orion-mdio";
324			#address-cells = <1>;
325			#size-cells = <0>;
326			reg = <0x72004 0x84>;
327			interrupts = <46>;
328			clocks = <&gate_clk 0>;
329			status = "disabled";
330
331			/* add phy nodes in board file */
332		};
333
334		eth1: ethernet-controller@76000 {
335			compatible = "marvell,kirkwood-eth";
336			#address-cells = <1>;
337			#size-cells = <0>;
338			reg = <0x76000 0x4000>;
339			clocks = <&gate_clk 19>;
340			marvell,tx-checksum-limit = <1600>;
341			pinctrl-0 = <&pmx_ge1>;
342			pinctrl-names = "default";
343			status = "disabled";
344
345			eth1port: ethernet1-port@0 {
346				compatible = "marvell,kirkwood-eth-port";
347				reg = <0>;
348				interrupts = <15>;
349				/* overwrite MAC address in bootloader */
350				local-mac-address = [00 00 00 00 00 00];
351				/* set phy-handle property in board file */
352			};
353		};
354
355		sata_phy0: sata-phy@82000 {
356			compatible = "marvell,mvebu-sata-phy";
357			reg = <0x82000 0x0334>;
358			clocks = <&gate_clk 14>;
359			clock-names = "sata";
360			#phy-cells = <0>;
361			status = "ok";
362		};
363
364		sata_phy1: sata-phy@84000 {
365			compatible = "marvell,mvebu-sata-phy";
366			reg = <0x84000 0x0334>;
367			clocks = <&gate_clk 15>;
368			clock-names = "sata";
369			#phy-cells = <0>;
370			status = "ok";
371		};
372
373		audio0: audio-controller@a0000 {
374			compatible = "marvell,kirkwood-audio";
375			#sound-dai-cells = <0>;
376			reg = <0xa0000 0x2210>;
377			interrupts = <24>;
378			clocks = <&gate_clk 9>;
379			clock-names = "internal";
380			status = "disabled";
381		};
382	};
383};
384