1/*
2 * SoC core Device Tree for the ARM Integrator platforms
3 */
4
5/include/ "skeleton.dtsi"
6
7/ {
8	core-module@10000000 {
9		compatible = "arm,core-module-integrator", "syscon";
10		reg = <0x10000000 0x200>;
11
12		/* Use core module LED to indicate CPU load */
13		led@0c.0 {
14			compatible = "register-bit-led";
15			offset = <0x0c>;
16			mask = <0x01>;
17			label = "integrator:core_module";
18			linux,default-trigger = "cpu0";
19			default-state = "on";
20		};
21	};
22
23	ebi@12000000 {
24		compatible = "arm,external-bus-interface";
25		reg = <0x12000000 0x100>;
26	};
27
28	timer@13000000 {
29		reg = <0x13000000 0x100>;
30		interrupt-parent = <&pic>;
31		interrupts = <5>;
32	};
33
34	timer@13000100 {
35		reg = <0x13000100 0x100>;
36		interrupt-parent = <&pic>;
37		interrupts = <6>;
38	};
39
40	timer@13000200 {
41		reg = <0x13000200 0x100>;
42		interrupt-parent = <&pic>;
43		interrupts = <7>;
44	};
45
46	pic@14000000 {
47		compatible = "arm,versatile-fpga-irq";
48		#interrupt-cells = <1>;
49		interrupt-controller;
50		reg = <0x14000000 0x100>;
51		clear-mask = <0xffffffff>;
52	};
53
54	flash@24000000 {
55		compatible = "cfi-flash";
56		reg = <0x24000000 0x02000000>;
57	};
58
59	fpga {
60		compatible = "arm,amba-bus", "simple-bus";
61		#address-cells = <1>;
62		#size-cells = <1>;
63		ranges;
64		interrupt-parent = <&pic>;
65
66		/*
67		 * These PrimeCells are in the same locations and using the
68		 * same interrupts in all Integrators, however the silicon
69		 * version deployed is different.
70		 */
71		rtc@15000000 {
72			reg = <0x15000000 0x1000>;
73			interrupts = <8>;
74		};
75
76		uart@16000000 {
77			reg = <0x16000000 0x1000>;
78			interrupts = <1>;
79		};
80
81		uart@17000000 {
82			reg = <0x17000000 0x1000>;
83			interrupts = <2>;
84		};
85
86		kmi@18000000 {
87			reg = <0x18000000 0x1000>;
88			interrupts = <3>;
89		};
90
91		kmi@19000000 {
92			reg = <0x19000000 0x1000>;
93			interrupts = <4>;
94		};
95
96		syscon {
97			/* Debug registers mapped as syscon */
98			compatible = "syscon";
99			reg = <0x1a000000 0x10>;
100
101			led@04.0 {
102				compatible = "register-bit-led";
103				offset = <0x04>;
104				mask = <0x01>;
105				label = "integrator:green0";
106				linux,default-trigger = "heartbeat";
107				default-state = "on";
108			};
109			led@04.1 {
110				compatible = "register-bit-led";
111				offset = <0x04>;
112				mask = <0x02>;
113				label = "integrator:yellow";
114				default-state = "off";
115			};
116			led@04.2 {
117				compatible = "register-bit-led";
118				offset = <0x04>;
119				mask = <0x04>;
120				label = "integrator:red";
121				default-state = "off";
122			};
123			led@04.3 {
124				compatible = "register-bit-led";
125				offset = <0x04>;
126				mask = <0x08>;
127				label = "integrator:green1";
128				default-state = "off";
129			};
130		};
131	};
132};
133