1/* 2 * Device Tree Source for AM33XX SoC 3 * 4 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ 5 * 6 * This file is licensed under the terms of the GNU General Public License 7 * version 2. This program is licensed "as is" without any warranty of any 8 * kind, whether express or implied. 9 */ 10 11#include <dt-bindings/gpio/gpio.h> 12#include <dt-bindings/pinctrl/am33xx.h> 13 14#include "skeleton.dtsi" 15 16/ { 17 compatible = "ti,am33xx"; 18 interrupt-parent = <&intc>; 19 20 aliases { 21 i2c0 = &i2c0; 22 i2c1 = &i2c1; 23 i2c2 = &i2c2; 24 serial0 = &uart0; 25 serial1 = &uart1; 26 serial2 = &uart2; 27 serial3 = &uart3; 28 serial4 = &uart4; 29 serial5 = &uart5; 30 d_can0 = &dcan0; 31 d_can1 = &dcan1; 32 usb0 = &usb0; 33 usb1 = &usb1; 34 phy0 = &usb0_phy; 35 phy1 = &usb1_phy; 36 ethernet0 = &cpsw_emac0; 37 ethernet1 = &cpsw_emac1; 38 }; 39 40 cpus { 41 #address-cells = <1>; 42 #size-cells = <0>; 43 cpu@0 { 44 compatible = "arm,cortex-a8"; 45 device_type = "cpu"; 46 reg = <0>; 47 48 /* 49 * To consider voltage drop between PMIC and SoC, 50 * tolerance value is reduced to 2% from 4% and 51 * voltage value is increased as a precaution. 52 */ 53 operating-points = < 54 /* kHz uV */ 55 720000 1285000 56 600000 1225000 57 500000 1125000 58 275000 1125000 59 >; 60 voltage-tolerance = <2>; /* 2 percentage */ 61 62 clocks = <&dpll_mpu_ck>; 63 clock-names = "cpu"; 64 65 clock-latency = <300000>; /* From omap-cpufreq driver */ 66 }; 67 }; 68 69 pmu { 70 compatible = "arm,cortex-a8-pmu"; 71 interrupts = <3>; 72 }; 73 74 /* 75 * The soc node represents the soc top level view. It is used for IPs 76 * that are not memory mapped in the MPU view or for the MPU itself. 77 */ 78 soc { 79 compatible = "ti,omap-infra"; 80 mpu { 81 compatible = "ti,omap3-mpu"; 82 ti,hwmods = "mpu"; 83 }; 84 }; 85 86 /* 87 * XXX: Use a flat representation of the AM33XX interconnect. 88 * The real AM33XX interconnect network is quite complex. Since 89 * it will not bring real advantage to represent that in DT 90 * for the moment, just use a fake OCP bus entry to represent 91 * the whole bus hierarchy. 92 */ 93 ocp { 94 compatible = "simple-bus"; 95 #address-cells = <1>; 96 #size-cells = <1>; 97 ranges; 98 ti,hwmods = "l3_main"; 99 100 l4_wkup: l4_wkup@44c00000 { 101 compatible = "ti,am3-l4-wkup", "simple-bus"; 102 #address-cells = <1>; 103 #size-cells = <1>; 104 ranges = <0 0x44c00000 0x280000>; 105 106 prcm: prcm@200000 { 107 compatible = "ti,am3-prcm"; 108 reg = <0x200000 0x4000>; 109 110 prcm_clocks: clocks { 111 #address-cells = <1>; 112 #size-cells = <0>; 113 }; 114 115 prcm_clockdomains: clockdomains { 116 }; 117 }; 118 119 scm: scm@210000 { 120 compatible = "ti,am3-scm", "simple-bus"; 121 reg = <0x210000 0x2000>; 122 #address-cells = <1>; 123 #size-cells = <1>; 124 ranges = <0 0x210000 0x2000>; 125 126 am33xx_pinmux: pinmux@800 { 127 compatible = "pinctrl-single"; 128 reg = <0x800 0x238>; 129 #address-cells = <1>; 130 #size-cells = <0>; 131 pinctrl-single,register-width = <32>; 132 pinctrl-single,function-mask = <0x7f>; 133 }; 134 135 scm_conf: scm_conf@0 { 136 compatible = "syscon"; 137 reg = <0x0 0x800>; 138 #address-cells = <1>; 139 #size-cells = <1>; 140 141 scm_clocks: clocks { 142 #address-cells = <1>; 143 #size-cells = <0>; 144 }; 145 }; 146 147 scm_clockdomains: clockdomains { 148 }; 149 }; 150 }; 151 152 intc: interrupt-controller@48200000 { 153 compatible = "ti,am33xx-intc"; 154 interrupt-controller; 155 #interrupt-cells = <1>; 156 reg = <0x48200000 0x1000>; 157 }; 158 159 edma: edma@49000000 { 160 compatible = "ti,edma3"; 161 ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2"; 162 reg = <0x49000000 0x10000>, 163 <0x44e10f90 0x40>; 164 interrupts = <12 13 14>; 165 #dma-cells = <1>; 166 }; 167 168 gpio0: gpio@44e07000 { 169 compatible = "ti,omap4-gpio"; 170 ti,hwmods = "gpio1"; 171 gpio-controller; 172 #gpio-cells = <2>; 173 interrupt-controller; 174 #interrupt-cells = <2>; 175 reg = <0x44e07000 0x1000>; 176 interrupts = <96>; 177 }; 178 179 gpio1: gpio@4804c000 { 180 compatible = "ti,omap4-gpio"; 181 ti,hwmods = "gpio2"; 182 gpio-controller; 183 #gpio-cells = <2>; 184 interrupt-controller; 185 #interrupt-cells = <2>; 186 reg = <0x4804c000 0x1000>; 187 interrupts = <98>; 188 }; 189 190 gpio2: gpio@481ac000 { 191 compatible = "ti,omap4-gpio"; 192 ti,hwmods = "gpio3"; 193 gpio-controller; 194 #gpio-cells = <2>; 195 interrupt-controller; 196 #interrupt-cells = <2>; 197 reg = <0x481ac000 0x1000>; 198 interrupts = <32>; 199 }; 200 201 gpio3: gpio@481ae000 { 202 compatible = "ti,omap4-gpio"; 203 ti,hwmods = "gpio4"; 204 gpio-controller; 205 #gpio-cells = <2>; 206 interrupt-controller; 207 #interrupt-cells = <2>; 208 reg = <0x481ae000 0x1000>; 209 interrupts = <62>; 210 }; 211 212 uart0: serial@44e09000 { 213 compatible = "ti,omap3-uart"; 214 ti,hwmods = "uart1"; 215 clock-frequency = <48000000>; 216 reg = <0x44e09000 0x2000>; 217 interrupts = <72>; 218 status = "disabled"; 219 dmas = <&edma 26>, <&edma 27>; 220 dma-names = "tx", "rx"; 221 }; 222 223 uart1: serial@48022000 { 224 compatible = "ti,omap3-uart"; 225 ti,hwmods = "uart2"; 226 clock-frequency = <48000000>; 227 reg = <0x48022000 0x2000>; 228 interrupts = <73>; 229 status = "disabled"; 230 dmas = <&edma 28>, <&edma 29>; 231 dma-names = "tx", "rx"; 232 }; 233 234 uart2: serial@48024000 { 235 compatible = "ti,omap3-uart"; 236 ti,hwmods = "uart3"; 237 clock-frequency = <48000000>; 238 reg = <0x48024000 0x2000>; 239 interrupts = <74>; 240 status = "disabled"; 241 dmas = <&edma 30>, <&edma 31>; 242 dma-names = "tx", "rx"; 243 }; 244 245 uart3: serial@481a6000 { 246 compatible = "ti,omap3-uart"; 247 ti,hwmods = "uart4"; 248 clock-frequency = <48000000>; 249 reg = <0x481a6000 0x2000>; 250 interrupts = <44>; 251 status = "disabled"; 252 }; 253 254 uart4: serial@481a8000 { 255 compatible = "ti,omap3-uart"; 256 ti,hwmods = "uart5"; 257 clock-frequency = <48000000>; 258 reg = <0x481a8000 0x2000>; 259 interrupts = <45>; 260 status = "disabled"; 261 }; 262 263 uart5: serial@481aa000 { 264 compatible = "ti,omap3-uart"; 265 ti,hwmods = "uart6"; 266 clock-frequency = <48000000>; 267 reg = <0x481aa000 0x2000>; 268 interrupts = <46>; 269 status = "disabled"; 270 }; 271 272 i2c0: i2c@44e0b000 { 273 compatible = "ti,omap4-i2c"; 274 #address-cells = <1>; 275 #size-cells = <0>; 276 ti,hwmods = "i2c1"; 277 reg = <0x44e0b000 0x1000>; 278 interrupts = <70>; 279 status = "disabled"; 280 }; 281 282 i2c1: i2c@4802a000 { 283 compatible = "ti,omap4-i2c"; 284 #address-cells = <1>; 285 #size-cells = <0>; 286 ti,hwmods = "i2c2"; 287 reg = <0x4802a000 0x1000>; 288 interrupts = <71>; 289 status = "disabled"; 290 }; 291 292 i2c2: i2c@4819c000 { 293 compatible = "ti,omap4-i2c"; 294 #address-cells = <1>; 295 #size-cells = <0>; 296 ti,hwmods = "i2c3"; 297 reg = <0x4819c000 0x1000>; 298 interrupts = <30>; 299 status = "disabled"; 300 }; 301 302 mmc1: mmc@48060000 { 303 compatible = "ti,omap4-hsmmc"; 304 ti,hwmods = "mmc1"; 305 ti,dual-volt; 306 ti,needs-special-reset; 307 ti,needs-special-hs-handling; 308 dmas = <&edma 24 309 &edma 25>; 310 dma-names = "tx", "rx"; 311 interrupts = <64>; 312 interrupt-parent = <&intc>; 313 reg = <0x48060000 0x1000>; 314 status = "disabled"; 315 }; 316 317 mmc2: mmc@481d8000 { 318 compatible = "ti,omap4-hsmmc"; 319 ti,hwmods = "mmc2"; 320 ti,needs-special-reset; 321 dmas = <&edma 2 322 &edma 3>; 323 dma-names = "tx", "rx"; 324 interrupts = <28>; 325 interrupt-parent = <&intc>; 326 reg = <0x481d8000 0x1000>; 327 status = "disabled"; 328 }; 329 330 mmc3: mmc@47810000 { 331 compatible = "ti,omap4-hsmmc"; 332 ti,hwmods = "mmc3"; 333 ti,needs-special-reset; 334 interrupts = <29>; 335 interrupt-parent = <&intc>; 336 reg = <0x47810000 0x1000>; 337 status = "disabled"; 338 }; 339 340 hwspinlock: spinlock@480ca000 { 341 compatible = "ti,omap4-hwspinlock"; 342 reg = <0x480ca000 0x1000>; 343 ti,hwmods = "spinlock"; 344 #hwlock-cells = <1>; 345 }; 346 347 wdt2: wdt@44e35000 { 348 compatible = "ti,omap3-wdt"; 349 ti,hwmods = "wd_timer2"; 350 reg = <0x44e35000 0x1000>; 351 interrupts = <91>; 352 }; 353 354 dcan0: can@481cc000 { 355 compatible = "ti,am3352-d_can"; 356 ti,hwmods = "d_can0"; 357 reg = <0x481cc000 0x2000>; 358 clocks = <&dcan0_fck>; 359 clock-names = "fck"; 360 syscon-raminit = <&scm_conf 0x644 0>; 361 interrupts = <52>; 362 status = "disabled"; 363 }; 364 365 dcan1: can@481d0000 { 366 compatible = "ti,am3352-d_can"; 367 ti,hwmods = "d_can1"; 368 reg = <0x481d0000 0x2000>; 369 clocks = <&dcan1_fck>; 370 clock-names = "fck"; 371 syscon-raminit = <&scm_conf 0x644 1>; 372 interrupts = <55>; 373 status = "disabled"; 374 }; 375 376 mailbox: mailbox@480C8000 { 377 compatible = "ti,omap4-mailbox"; 378 reg = <0x480C8000 0x200>; 379 interrupts = <77>; 380 ti,hwmods = "mailbox"; 381 #mbox-cells = <1>; 382 ti,mbox-num-users = <4>; 383 ti,mbox-num-fifos = <8>; 384 mbox_wkupm3: wkup_m3 { 385 ti,mbox-tx = <0 0 0>; 386 ti,mbox-rx = <0 0 3>; 387 }; 388 }; 389 390 timer1: timer@44e31000 { 391 compatible = "ti,am335x-timer-1ms"; 392 reg = <0x44e31000 0x400>; 393 interrupts = <67>; 394 ti,hwmods = "timer1"; 395 ti,timer-alwon; 396 }; 397 398 timer2: timer@48040000 { 399 compatible = "ti,am335x-timer"; 400 reg = <0x48040000 0x400>; 401 interrupts = <68>; 402 ti,hwmods = "timer2"; 403 }; 404 405 timer3: timer@48042000 { 406 compatible = "ti,am335x-timer"; 407 reg = <0x48042000 0x400>; 408 interrupts = <69>; 409 ti,hwmods = "timer3"; 410 }; 411 412 timer4: timer@48044000 { 413 compatible = "ti,am335x-timer"; 414 reg = <0x48044000 0x400>; 415 interrupts = <92>; 416 ti,hwmods = "timer4"; 417 ti,timer-pwm; 418 }; 419 420 timer5: timer@48046000 { 421 compatible = "ti,am335x-timer"; 422 reg = <0x48046000 0x400>; 423 interrupts = <93>; 424 ti,hwmods = "timer5"; 425 ti,timer-pwm; 426 }; 427 428 timer6: timer@48048000 { 429 compatible = "ti,am335x-timer"; 430 reg = <0x48048000 0x400>; 431 interrupts = <94>; 432 ti,hwmods = "timer6"; 433 ti,timer-pwm; 434 }; 435 436 timer7: timer@4804a000 { 437 compatible = "ti,am335x-timer"; 438 reg = <0x4804a000 0x400>; 439 interrupts = <95>; 440 ti,hwmods = "timer7"; 441 ti,timer-pwm; 442 }; 443 444 rtc: rtc@44e3e000 { 445 compatible = "ti,am3352-rtc", "ti,da830-rtc"; 446 reg = <0x44e3e000 0x1000>; 447 interrupts = <75 448 76>; 449 ti,hwmods = "rtc"; 450 }; 451 452 spi0: spi@48030000 { 453 compatible = "ti,omap4-mcspi"; 454 #address-cells = <1>; 455 #size-cells = <0>; 456 reg = <0x48030000 0x400>; 457 interrupts = <65>; 458 ti,spi-num-cs = <2>; 459 ti,hwmods = "spi0"; 460 dmas = <&edma 16 461 &edma 17 462 &edma 18 463 &edma 19>; 464 dma-names = "tx0", "rx0", "tx1", "rx1"; 465 status = "disabled"; 466 }; 467 468 spi1: spi@481a0000 { 469 compatible = "ti,omap4-mcspi"; 470 #address-cells = <1>; 471 #size-cells = <0>; 472 reg = <0x481a0000 0x400>; 473 interrupts = <125>; 474 ti,spi-num-cs = <2>; 475 ti,hwmods = "spi1"; 476 dmas = <&edma 42 477 &edma 43 478 &edma 44 479 &edma 45>; 480 dma-names = "tx0", "rx0", "tx1", "rx1"; 481 status = "disabled"; 482 }; 483 484 usb: usb@47400000 { 485 compatible = "ti,am33xx-usb"; 486 reg = <0x47400000 0x1000>; 487 ranges; 488 #address-cells = <1>; 489 #size-cells = <1>; 490 ti,hwmods = "usb_otg_hs"; 491 status = "disabled"; 492 493 usb_ctrl_mod: control@44e10620 { 494 compatible = "ti,am335x-usb-ctrl-module"; 495 reg = <0x44e10620 0x10 496 0x44e10648 0x4>; 497 reg-names = "phy_ctrl", "wakeup"; 498 status = "disabled"; 499 }; 500 501 usb0_phy: usb-phy@47401300 { 502 compatible = "ti,am335x-usb-phy"; 503 reg = <0x47401300 0x100>; 504 reg-names = "phy"; 505 status = "disabled"; 506 ti,ctrl_mod = <&usb_ctrl_mod>; 507 }; 508 509 usb0: usb@47401000 { 510 compatible = "ti,musb-am33xx"; 511 status = "disabled"; 512 reg = <0x47401400 0x400 513 0x47401000 0x200>; 514 reg-names = "mc", "control"; 515 516 interrupts = <18>; 517 interrupt-names = "mc"; 518 dr_mode = "otg"; 519 mentor,multipoint = <1>; 520 mentor,num-eps = <16>; 521 mentor,ram-bits = <12>; 522 mentor,power = <500>; 523 phys = <&usb0_phy>; 524 525 dmas = <&cppi41dma 0 0 &cppi41dma 1 0 526 &cppi41dma 2 0 &cppi41dma 3 0 527 &cppi41dma 4 0 &cppi41dma 5 0 528 &cppi41dma 6 0 &cppi41dma 7 0 529 &cppi41dma 8 0 &cppi41dma 9 0 530 &cppi41dma 10 0 &cppi41dma 11 0 531 &cppi41dma 12 0 &cppi41dma 13 0 532 &cppi41dma 14 0 &cppi41dma 0 1 533 &cppi41dma 1 1 &cppi41dma 2 1 534 &cppi41dma 3 1 &cppi41dma 4 1 535 &cppi41dma 5 1 &cppi41dma 6 1 536 &cppi41dma 7 1 &cppi41dma 8 1 537 &cppi41dma 9 1 &cppi41dma 10 1 538 &cppi41dma 11 1 &cppi41dma 12 1 539 &cppi41dma 13 1 &cppi41dma 14 1>; 540 dma-names = 541 "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7", 542 "rx8", "rx9", "rx10", "rx11", "rx12", "rx13", 543 "rx14", "rx15", 544 "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7", 545 "tx8", "tx9", "tx10", "tx11", "tx12", "tx13", 546 "tx14", "tx15"; 547 }; 548 549 usb1_phy: usb-phy@47401b00 { 550 compatible = "ti,am335x-usb-phy"; 551 reg = <0x47401b00 0x100>; 552 reg-names = "phy"; 553 status = "disabled"; 554 ti,ctrl_mod = <&usb_ctrl_mod>; 555 }; 556 557 usb1: usb@47401800 { 558 compatible = "ti,musb-am33xx"; 559 status = "disabled"; 560 reg = <0x47401c00 0x400 561 0x47401800 0x200>; 562 reg-names = "mc", "control"; 563 interrupts = <19>; 564 interrupt-names = "mc"; 565 dr_mode = "otg"; 566 mentor,multipoint = <1>; 567 mentor,num-eps = <16>; 568 mentor,ram-bits = <12>; 569 mentor,power = <500>; 570 phys = <&usb1_phy>; 571 572 dmas = <&cppi41dma 15 0 &cppi41dma 16 0 573 &cppi41dma 17 0 &cppi41dma 18 0 574 &cppi41dma 19 0 &cppi41dma 20 0 575 &cppi41dma 21 0 &cppi41dma 22 0 576 &cppi41dma 23 0 &cppi41dma 24 0 577 &cppi41dma 25 0 &cppi41dma 26 0 578 &cppi41dma 27 0 &cppi41dma 28 0 579 &cppi41dma 29 0 &cppi41dma 15 1 580 &cppi41dma 16 1 &cppi41dma 17 1 581 &cppi41dma 18 1 &cppi41dma 19 1 582 &cppi41dma 20 1 &cppi41dma 21 1 583 &cppi41dma 22 1 &cppi41dma 23 1 584 &cppi41dma 24 1 &cppi41dma 25 1 585 &cppi41dma 26 1 &cppi41dma 27 1 586 &cppi41dma 28 1 &cppi41dma 29 1>; 587 dma-names = 588 "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7", 589 "rx8", "rx9", "rx10", "rx11", "rx12", "rx13", 590 "rx14", "rx15", 591 "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7", 592 "tx8", "tx9", "tx10", "tx11", "tx12", "tx13", 593 "tx14", "tx15"; 594 }; 595 596 cppi41dma: dma-controller@47402000 { 597 compatible = "ti,am3359-cppi41"; 598 reg = <0x47400000 0x1000 599 0x47402000 0x1000 600 0x47403000 0x1000 601 0x47404000 0x4000>; 602 reg-names = "glue", "controller", "scheduler", "queuemgr"; 603 interrupts = <17>; 604 interrupt-names = "glue"; 605 #dma-cells = <2>; 606 #dma-channels = <30>; 607 #dma-requests = <256>; 608 status = "disabled"; 609 }; 610 }; 611 612 epwmss0: epwmss@48300000 { 613 compatible = "ti,am33xx-pwmss"; 614 reg = <0x48300000 0x10>; 615 ti,hwmods = "epwmss0"; 616 #address-cells = <1>; 617 #size-cells = <1>; 618 status = "disabled"; 619 ranges = <0x48300100 0x48300100 0x80 /* ECAP */ 620 0x48300180 0x48300180 0x80 /* EQEP */ 621 0x48300200 0x48300200 0x80>; /* EHRPWM */ 622 623 ecap0: ecap@48300100 { 624 compatible = "ti,am33xx-ecap"; 625 #pwm-cells = <3>; 626 reg = <0x48300100 0x80>; 627 interrupts = <31>; 628 interrupt-names = "ecap0"; 629 ti,hwmods = "ecap0"; 630 status = "disabled"; 631 }; 632 633 ehrpwm0: ehrpwm@48300200 { 634 compatible = "ti,am33xx-ehrpwm"; 635 #pwm-cells = <3>; 636 reg = <0x48300200 0x80>; 637 ti,hwmods = "ehrpwm0"; 638 status = "disabled"; 639 }; 640 }; 641 642 epwmss1: epwmss@48302000 { 643 compatible = "ti,am33xx-pwmss"; 644 reg = <0x48302000 0x10>; 645 ti,hwmods = "epwmss1"; 646 #address-cells = <1>; 647 #size-cells = <1>; 648 status = "disabled"; 649 ranges = <0x48302100 0x48302100 0x80 /* ECAP */ 650 0x48302180 0x48302180 0x80 /* EQEP */ 651 0x48302200 0x48302200 0x80>; /* EHRPWM */ 652 653 ecap1: ecap@48302100 { 654 compatible = "ti,am33xx-ecap"; 655 #pwm-cells = <3>; 656 reg = <0x48302100 0x80>; 657 interrupts = <47>; 658 interrupt-names = "ecap1"; 659 ti,hwmods = "ecap1"; 660 status = "disabled"; 661 }; 662 663 ehrpwm1: ehrpwm@48302200 { 664 compatible = "ti,am33xx-ehrpwm"; 665 #pwm-cells = <3>; 666 reg = <0x48302200 0x80>; 667 ti,hwmods = "ehrpwm1"; 668 status = "disabled"; 669 }; 670 }; 671 672 epwmss2: epwmss@48304000 { 673 compatible = "ti,am33xx-pwmss"; 674 reg = <0x48304000 0x10>; 675 ti,hwmods = "epwmss2"; 676 #address-cells = <1>; 677 #size-cells = <1>; 678 status = "disabled"; 679 ranges = <0x48304100 0x48304100 0x80 /* ECAP */ 680 0x48304180 0x48304180 0x80 /* EQEP */ 681 0x48304200 0x48304200 0x80>; /* EHRPWM */ 682 683 ecap2: ecap@48304100 { 684 compatible = "ti,am33xx-ecap"; 685 #pwm-cells = <3>; 686 reg = <0x48304100 0x80>; 687 interrupts = <61>; 688 interrupt-names = "ecap2"; 689 ti,hwmods = "ecap2"; 690 status = "disabled"; 691 }; 692 693 ehrpwm2: ehrpwm@48304200 { 694 compatible = "ti,am33xx-ehrpwm"; 695 #pwm-cells = <3>; 696 reg = <0x48304200 0x80>; 697 ti,hwmods = "ehrpwm2"; 698 status = "disabled"; 699 }; 700 }; 701 702 mac: ethernet@4a100000 { 703 compatible = "ti,cpsw"; 704 ti,hwmods = "cpgmac0"; 705 clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>; 706 clock-names = "fck", "cpts"; 707 cpdma_channels = <8>; 708 ale_entries = <1024>; 709 bd_ram_size = <0x2000>; 710 no_bd_ram = <0>; 711 rx_descs = <64>; 712 mac_control = <0x20>; 713 slaves = <2>; 714 active_slave = <0>; 715 cpts_clock_mult = <0x80000000>; 716 cpts_clock_shift = <29>; 717 reg = <0x4a100000 0x800 718 0x4a101200 0x100>; 719 #address-cells = <1>; 720 #size-cells = <1>; 721 interrupt-parent = <&intc>; 722 /* 723 * c0_rx_thresh_pend 724 * c0_rx_pend 725 * c0_tx_pend 726 * c0_misc_pend 727 */ 728 interrupts = <40 41 42 43>; 729 ranges; 730 syscon = <&scm_conf>; 731 status = "disabled"; 732 733 davinci_mdio: mdio@4a101000 { 734 compatible = "ti,davinci_mdio"; 735 #address-cells = <1>; 736 #size-cells = <0>; 737 ti,hwmods = "davinci_mdio"; 738 bus_freq = <1000000>; 739 reg = <0x4a101000 0x100>; 740 status = "disabled"; 741 }; 742 743 cpsw_emac0: slave@4a100200 { 744 /* Filled in by U-Boot */ 745 mac-address = [ 00 00 00 00 00 00 ]; 746 }; 747 748 cpsw_emac1: slave@4a100300 { 749 /* Filled in by U-Boot */ 750 mac-address = [ 00 00 00 00 00 00 ]; 751 }; 752 753 phy_sel: cpsw-phy-sel@44e10650 { 754 compatible = "ti,am3352-cpsw-phy-sel"; 755 reg= <0x44e10650 0x4>; 756 reg-names = "gmii-sel"; 757 }; 758 }; 759 760 ocmcram: ocmcram@40300000 { 761 compatible = "mmio-sram"; 762 reg = <0x40300000 0x10000>; /* 64k */ 763 }; 764 765 wkup_m3: wkup_m3@44d00000 { 766 compatible = "ti,am3353-wkup-m3"; 767 reg = <0x44d00000 0x4000 /* M3 UMEM */ 768 0x44d80000 0x2000>; /* M3 DMEM */ 769 ti,hwmods = "wkup_m3"; 770 ti,no-reset-on-init; 771 }; 772 773 elm: elm@48080000 { 774 compatible = "ti,am3352-elm"; 775 reg = <0x48080000 0x2000>; 776 interrupts = <4>; 777 ti,hwmods = "elm"; 778 status = "disabled"; 779 }; 780 781 lcdc: lcdc@4830e000 { 782 compatible = "ti,am33xx-tilcdc"; 783 reg = <0x4830e000 0x1000>; 784 interrupt-parent = <&intc>; 785 interrupts = <36>; 786 ti,hwmods = "lcdc"; 787 status = "disabled"; 788 }; 789 790 tscadc: tscadc@44e0d000 { 791 compatible = "ti,am3359-tscadc"; 792 reg = <0x44e0d000 0x1000>; 793 interrupt-parent = <&intc>; 794 interrupts = <16>; 795 ti,hwmods = "adc_tsc"; 796 status = "disabled"; 797 798 tsc { 799 compatible = "ti,am3359-tsc"; 800 }; 801 am335x_adc: adc { 802 #io-channel-cells = <1>; 803 compatible = "ti,am3359-adc"; 804 }; 805 }; 806 807 gpmc: gpmc@50000000 { 808 compatible = "ti,am3352-gpmc"; 809 ti,hwmods = "gpmc"; 810 ti,no-idle-on-init; 811 reg = <0x50000000 0x2000>; 812 interrupts = <100>; 813 gpmc,num-cs = <7>; 814 gpmc,num-waitpins = <2>; 815 #address-cells = <2>; 816 #size-cells = <1>; 817 status = "disabled"; 818 }; 819 820 sham: sham@53100000 { 821 compatible = "ti,omap4-sham"; 822 ti,hwmods = "sham"; 823 reg = <0x53100000 0x200>; 824 interrupts = <109>; 825 dmas = <&edma 36>; 826 dma-names = "rx"; 827 }; 828 829 aes: aes@53500000 { 830 compatible = "ti,omap4-aes"; 831 ti,hwmods = "aes"; 832 reg = <0x53500000 0xa0>; 833 interrupts = <103>; 834 dmas = <&edma 6>, 835 <&edma 5>; 836 dma-names = "tx", "rx"; 837 }; 838 839 mcasp0: mcasp@48038000 { 840 compatible = "ti,am33xx-mcasp-audio"; 841 ti,hwmods = "mcasp0"; 842 reg = <0x48038000 0x2000>, 843 <0x46000000 0x400000>; 844 reg-names = "mpu", "dat"; 845 interrupts = <80>, <81>; 846 interrupt-names = "tx", "rx"; 847 status = "disabled"; 848 dmas = <&edma 8>, 849 <&edma 9>; 850 dma-names = "tx", "rx"; 851 }; 852 853 mcasp1: mcasp@4803C000 { 854 compatible = "ti,am33xx-mcasp-audio"; 855 ti,hwmods = "mcasp1"; 856 reg = <0x4803C000 0x2000>, 857 <0x46400000 0x400000>; 858 reg-names = "mpu", "dat"; 859 interrupts = <82>, <83>; 860 interrupt-names = "tx", "rx"; 861 status = "disabled"; 862 dmas = <&edma 10>, 863 <&edma 11>; 864 dma-names = "tx", "rx"; 865 }; 866 867 rng: rng@48310000 { 868 compatible = "ti,omap4-rng"; 869 ti,hwmods = "rng"; 870 reg = <0x48310000 0x2000>; 871 interrupts = <111>; 872 }; 873 }; 874}; 875 876/include/ "am33xx-clocks.dtsi" 877