1/*
2 * SMC 37C93X initialization code
3 */
4
5#include <linux/kernel.h>
6
7#include <linux/mm.h>
8#include <linux/init.h>
9#include <linux/delay.h>
10
11#include <asm/hwrpb.h>
12#include <asm/io.h>
13#include <asm/segment.h>
14
15#define SMC_DEBUG 0
16
17#if SMC_DEBUG
18# define DBG_DEVS(args)         printk args
19#else
20# define DBG_DEVS(args)
21#endif
22
23#define KB              1024
24#define MB              (1024*KB)
25#define GB              (1024*MB)
26
27/* device "activate" register contents */
28#define DEVICE_ON		1
29#define DEVICE_OFF		0
30
31/* configuration on/off keys */
32#define CONFIG_ON_KEY		0x55
33#define CONFIG_OFF_KEY		0xaa
34
35/* configuration space device definitions */
36#define FDC			0
37#define IDE1			1
38#define IDE2			2
39#define PARP			3
40#define SER1			4
41#define SER2			5
42#define RTCL			6
43#define KYBD			7
44#define AUXIO			8
45
46/* Chip register offsets from base */
47#define CONFIG_CONTROL		0x02
48#define INDEX_ADDRESS		0x03
49#define LOGICAL_DEVICE_NUMBER	0x07
50#define DEVICE_ID		0x20
51#define DEVICE_REV		0x21
52#define POWER_CONTROL		0x22
53#define POWER_MGMT		0x23
54#define OSC			0x24
55
56#define ACTIVATE		0x30
57#define ADDR_HI			0x60
58#define ADDR_LO			0x61
59#define INTERRUPT_SEL		0x70
60#define INTERRUPT_SEL_2		0x72 /* KYBD/MOUS only */
61#define DMA_CHANNEL_SEL		0x74 /* FDC/PARP only */
62
63#define FDD_MODE_REGISTER	0x90
64#define FDD_OPTION_REGISTER	0x91
65
66/* values that we read back that are expected ... */
67#define VALID_DEVICE_ID		2
68
69/* default device addresses */
70#define KYBD_INTERRUPT		1
71#define MOUS_INTERRUPT		12
72#define COM2_BASE		0x2f8
73#define COM2_INTERRUPT		3
74#define COM1_BASE		0x3f8
75#define COM1_INTERRUPT		4
76#define PARP_BASE		0x3bc
77#define PARP_INTERRUPT		7
78
79static unsigned long __init SMCConfigState(unsigned long baseAddr)
80{
81	unsigned char devId;
82
83	unsigned long configPort;
84	unsigned long indexPort;
85	unsigned long dataPort;
86
87	int i;
88
89	configPort = indexPort = baseAddr;
90	dataPort = configPort + 1;
91
92#define NUM_RETRIES 5
93
94	for (i = 0; i < NUM_RETRIES; i++)
95	{
96		outb(CONFIG_ON_KEY, configPort);
97		outb(CONFIG_ON_KEY, configPort);
98		outb(DEVICE_ID, indexPort);
99		devId = inb(dataPort);
100		if (devId == VALID_DEVICE_ID) {
101			outb(DEVICE_REV, indexPort);
102			/* unsigned char devRev = */ inb(dataPort);
103			break;
104		}
105		else
106			udelay(100);
107	}
108	return (i != NUM_RETRIES) ? baseAddr : 0L;
109}
110
111static void __init SMCRunState(unsigned long baseAddr)
112{
113	outb(CONFIG_OFF_KEY, baseAddr);
114}
115
116static unsigned long __init SMCDetectUltraIO(void)
117{
118	unsigned long baseAddr;
119
120	baseAddr = 0x3F0;
121	if ( ( baseAddr = SMCConfigState( baseAddr ) ) == 0x3F0 ) {
122		return( baseAddr );
123	}
124	baseAddr = 0x370;
125	if ( ( baseAddr = SMCConfigState( baseAddr ) ) == 0x370 ) {
126		return( baseAddr );
127	}
128	return( ( unsigned long )0 );
129}
130
131static void __init SMCEnableDevice(unsigned long baseAddr,
132			    unsigned long device,
133			    unsigned long portaddr,
134			    unsigned long interrupt)
135{
136	unsigned long indexPort;
137	unsigned long dataPort;
138
139	indexPort = baseAddr;
140	dataPort = baseAddr + 1;
141
142	outb(LOGICAL_DEVICE_NUMBER, indexPort);
143	outb(device, dataPort);
144
145	outb(ADDR_LO, indexPort);
146	outb(( portaddr & 0xFF ), dataPort);
147
148	outb(ADDR_HI, indexPort);
149	outb((portaddr >> 8) & 0xFF, dataPort);
150
151	outb(INTERRUPT_SEL, indexPort);
152	outb(interrupt, dataPort);
153
154	outb(ACTIVATE, indexPort);
155	outb(DEVICE_ON, dataPort);
156}
157
158static void __init SMCEnableKYBD(unsigned long baseAddr)
159{
160	unsigned long indexPort;
161	unsigned long dataPort;
162
163	indexPort = baseAddr;
164	dataPort = baseAddr + 1;
165
166	outb(LOGICAL_DEVICE_NUMBER, indexPort);
167	outb(KYBD, dataPort);
168
169	outb(INTERRUPT_SEL, indexPort); /* Primary interrupt select */
170	outb(KYBD_INTERRUPT, dataPort);
171
172	outb(INTERRUPT_SEL_2, indexPort); /* Secondary interrupt select */
173	outb(MOUS_INTERRUPT, dataPort);
174
175	outb(ACTIVATE, indexPort);
176	outb(DEVICE_ON, dataPort);
177}
178
179static void __init SMCEnableFDC(unsigned long baseAddr)
180{
181	unsigned long indexPort;
182	unsigned long dataPort;
183
184	unsigned char oldValue;
185
186	indexPort = baseAddr;
187	dataPort = baseAddr + 1;
188
189	outb(LOGICAL_DEVICE_NUMBER, indexPort);
190	outb(FDC, dataPort);
191
192	outb(FDD_MODE_REGISTER, indexPort);
193	oldValue = inb(dataPort);
194
195	oldValue |= 0x0E;                   /* Enable burst mode */
196	outb(oldValue, dataPort);
197
198	outb(INTERRUPT_SEL, indexPort);	    /* Primary interrupt select */
199	outb(0x06, dataPort );
200
201	outb(DMA_CHANNEL_SEL, indexPort);   /* DMA channel select */
202	outb(0x02, dataPort);
203
204	outb(ACTIVATE, indexPort);
205	outb(DEVICE_ON, dataPort);
206}
207
208#if SMC_DEBUG
209static void __init SMCReportDeviceStatus(unsigned long baseAddr)
210{
211	unsigned long indexPort;
212	unsigned long dataPort;
213	unsigned char currentControl;
214
215	indexPort = baseAddr;
216	dataPort = baseAddr + 1;
217
218	outb(POWER_CONTROL, indexPort);
219	currentControl = inb(dataPort);
220
221	printk(currentControl & (1 << FDC)
222	       ? "\t+FDC Enabled\n" : "\t-FDC Disabled\n");
223	printk(currentControl & (1 << IDE1)
224	       ? "\t+IDE1 Enabled\n" : "\t-IDE1 Disabled\n");
225	printk(currentControl & (1 << IDE2)
226	       ? "\t+IDE2 Enabled\n" : "\t-IDE2 Disabled\n");
227	printk(currentControl & (1 << PARP)
228	       ? "\t+PARP Enabled\n" : "\t-PARP Disabled\n");
229	printk(currentControl & (1 << SER1)
230	       ? "\t+SER1 Enabled\n" : "\t-SER1 Disabled\n");
231	printk(currentControl & (1 << SER2)
232	       ? "\t+SER2 Enabled\n" : "\t-SER2 Disabled\n");
233
234	printk( "\n" );
235}
236#endif
237
238int __init SMC93x_Init(void)
239{
240	unsigned long SMCUltraBase;
241	unsigned long flags;
242
243	local_irq_save(flags);
244	if ((SMCUltraBase = SMCDetectUltraIO()) != 0UL) {
245#if SMC_DEBUG
246		SMCReportDeviceStatus(SMCUltraBase);
247#endif
248		SMCEnableDevice(SMCUltraBase, SER1, COM1_BASE, COM1_INTERRUPT);
249		DBG_DEVS(("SMC FDC37C93X: SER1 done\n"));
250		SMCEnableDevice(SMCUltraBase, SER2, COM2_BASE, COM2_INTERRUPT);
251		DBG_DEVS(("SMC FDC37C93X: SER2 done\n"));
252		SMCEnableDevice(SMCUltraBase, PARP, PARP_BASE, PARP_INTERRUPT);
253		DBG_DEVS(("SMC FDC37C93X: PARP done\n"));
254		/* On PC164, IDE on the SMC is not enabled;
255		   CMD646 (PCI) on MB */
256		SMCEnableKYBD(SMCUltraBase);
257		DBG_DEVS(("SMC FDC37C93X: KYB done\n"));
258		SMCEnableFDC(SMCUltraBase);
259		DBG_DEVS(("SMC FDC37C93X: FDC done\n"));
260#if SMC_DEBUG
261		SMCReportDeviceStatus(SMCUltraBase);
262#endif
263		SMCRunState(SMCUltraBase);
264		local_irq_restore(flags);
265		printk("SMC FDC37C93X Ultra I/O Controller found @ 0x%lx\n",
266		       SMCUltraBase);
267		return 1;
268	}
269	else {
270		local_irq_restore(flags);
271		DBG_DEVS(("No SMC FDC37C93X Ultra I/O Controller found\n"));
272		return 0;
273	}
274}
275