1ASoC jack detection
2===================
3
4ALSA has a standard API for representing physical jacks to user space,
5the kernel side of which can be seen in include/sound/jack.h.  ASoC
6provides a version of this API adding two additional features:
7
8 - It allows more than one jack detection method to work together on one
9   user visible jack.  In embedded systems it is common for multiple
10   to be present on a single jack but handled by separate bits of
11   hardware.
12
13 - Integration with DAPM, allowing DAPM endpoints to be updated
14   automatically based on the detected jack status (eg, turning off the
15   headphone outputs if no headphones are present).
16
17This is done by splitting the jacks up into three things working
18together: the jack itself represented by a struct snd_soc_jack, sets of
19snd_soc_jack_pins representing DAPM endpoints to update and blocks of
20code providing jack reporting mechanisms.
21
22For example, a system may have a stereo headset jack with two reporting
23mechanisms, one for the headphone and one for the microphone.  Some
24systems won't be able to use their speaker output while a headphone is
25connected and so will want to make sure to update both speaker and
26headphone when the headphone jack status changes.
27
28The jack - struct snd_soc_jack
29==============================
30
31This represents a physical jack on the system and is what is visible to
32user space.  The jack itself is completely passive, it is set up by the
33machine driver and updated by jack detection methods.
34
35Jacks are created by the machine driver calling snd_soc_jack_new().
36
37snd_soc_jack_pin
38================
39
40These represent a DAPM pin to update depending on some of the status
41bits supported by the jack.  Each snd_soc_jack has zero or more of these
42which are updated automatically.  They are created by the machine driver
43and associated with the jack using snd_soc_jack_add_pins().  The status
44of the endpoint may configured to be the opposite of the jack status if
45required (eg, enabling a built in microphone if a microphone is not
46connected via a jack).
47
48Jack detection methods
49======================
50
51Actual jack detection is done by code which is able to monitor some
52input to the system and update a jack by calling snd_soc_jack_report(),
53specifying a subset of bits to update.  The jack detection code should
54be set up by the machine driver, taking configuration for the jack to
55update and the set of things to report when the jack is connected.
56
57Often this is done based on the status of a GPIO - a handler for this is
58provided by the snd_soc_jack_add_gpio() function.  Other methods are
59also available, for example integrated into CODECs.  One example of
60CODEC integrated jack detection can be see in the WM8350 driver.
61
62Each jack may have multiple reporting mechanisms, though it will need at
63least one to be useful.
64
65Machine drivers
66===============
67
68These are all hooked together by the machine driver depending on the
69system hardware.  The machine driver will set up the snd_soc_jack and
70the list of pins to update then set up one or more jack detection
71mechanisms to update that jack based on their current status.
72