1* Rockchip SPI Controller
2
3The Rockchip SPI controller is used to interface with various devices such as flash
4and display controllers using the SPI communication interface.
5
6Required Properties:
7
8- compatible: should be one of the following.
9    "rockchip,rk3066-spi" for rk3066.
10    "rockchip,rk3188-spi", "rockchip,rk3066-spi" for rk3188.
11    "rockchip,rk3288-spi", "rockchip,rk3066-spi" for rk3288.
12- reg: physical base address of the controller and length of memory mapped
13       region.
14- interrupts: The interrupt number to the cpu. The interrupt specifier format
15              depends on the interrupt controller.
16- clocks: Must contain an entry for each entry in clock-names.
17- clock-names: Shall be "spiclk" for the transfer-clock, and "apb_pclk" for
18			   the peripheral clock.
19- #address-cells: should be 1.
20- #size-cells: should be 0.
21
22Optional Properties:
23
24- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
25		Documentation/devicetree/bindings/dma/dma.txt
26- dma-names: DMA request names should include "tx" and "rx" if present.
27- rx-sample-delay-ns: nanoseconds to delay after the SCLK edge before sampling
28		Rx data (may need to be fine tuned for high capacitance lines).
29		No delay (0) by default.
30
31
32Example:
33
34	spi0: spi@ff110000 {
35		compatible = "rockchip,rk3066-spi";
36		reg = <0xff110000 0x1000>;
37		dmas = <&pdma1 11>, <&pdma1 12>;
38		dma-names = "tx", "rx";
39		rx-sample-delay-ns = <10>;
40		#address-cells = <1>;
41		#size-cells = <0>;
42		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
43		clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
44		clock-names = "spiclk", "apb_pclk";
45	};
46