1Applied Micro X-Gene SoC DMA nodes
2
3DMA nodes are defined to describe on-chip DMA interfaces in
4APM X-Gene SoC.
5
6Required properties for DMA interfaces:
7- compatible: Should be "apm,xgene-dma".
8- device_type: set to "dma".
9- reg: Address and length of the register set for the device.
10  It contains the information of registers in the following order:
11  1st - DMA control and status register address space.
12  2nd - Descriptor ring control and status register address space.
13  3rd - Descriptor ring command register address space.
14  4th - Soc efuse register address space.
15- interrupts: DMA has 5 interrupts sources. 1st interrupt is
16  DMA error reporting interrupt. 2nd, 3rd, 4th and 5th interrupts
17  are completion interrupts for each DMA channels.
18- clocks: Reference to the clock entry.
19
20Optional properties:
21- dma-coherent : Present if dma operations are coherent
22
23Example:
24	dmaclk: dmaclk@1f27c000 {
25		compatible = "apm,xgene-device-clock";
26		#clock-cells = <1>;
27		clocks = <&socplldiv2 0>;
28		reg = <0x0 0x1f27c000 0x0 0x1000>;
29		reg-names = "csr-reg";
30		clock-output-names = "dmaclk";
31	};
32
33	dma: dma@1f270000 {
34			compatible = "apm,xgene-storm-dma";
35			device_type = "dma";
36			reg = <0x0 0x1f270000 0x0 0x10000>,
37			      <0x0 0x1f200000 0x0 0x10000>,
38			      <0x0 0x1b008000 0x0 0x2000>,
39			      <0x0 0x1054a000 0x0 0x100>;
40			interrupts = <0x0 0x82 0x4>,
41				     <0x0 0xb8 0x4>,
42				     <0x0 0xb9 0x4>,
43				     <0x0 0xba 0x4>,
44				     <0x0 0xbb 0x4>;
45			dma-coherent;
46			clocks = <&dmaclk 0>;
47	};
48