1* Clock bindings for Freescale i.MX5
2
3Required properties:
4- compatible: Should be "fsl,<soc>-ccm" , where <soc> can be imx51 or imx53
5- reg: Address and length of the register set
6- interrupts: Should contain CCM interrupt
7- #clock-cells: Should be <1>
8
9The clock consumer should specify the desired clock by having the clock
10ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx5-clock.h
11for the full list of i.MX5 clock IDs.
12
13Examples (for mx53):
14
15clks: ccm@53fd4000{
16	compatible = "fsl,imx53-ccm";
17	reg = <0x53fd4000 0x4000>;
18	interrupts = <0 71 0x04 0 72 0x04>;
19	#clock-cells = <1>;
20};
21
22can1: can@53fc8000 {
23	compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
24	reg = <0x53fc8000 0x4000>;
25	interrupts = <82>;
26	clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
27	clock-names = "ipg", "per";
28	status = "disabled";
29};
30