1		Simtec Electronics EB2410ITX (BAST)
2		===================================
3
4	http://www.simtec.co.uk/products/EB2410ITX/
5
6Introduction
7------------
8
9  The EB2410ITX is a S3C2410 based development board with a variety of
10  peripherals and expansion connectors. This board is also known by
11  the shortened name of Bast.
12
13
14Configuration
15-------------
16
17  To set the default configuration, use `make bast_defconfig` which
18  supports the commonly used features of this board.
19
20
21Support
22-------
23
24  Official support information can be found on the Simtec Electronics
25  website, at the product page http://www.simtec.co.uk/products/EB2410ITX/
26
27  Useful links:
28
29    - Resources Page http://www.simtec.co.uk/products/EB2410ITX/resources.html
30
31    - Board FAQ at http://www.simtec.co.uk/products/EB2410ITX/faq.html
32
33    - Bootloader info http://www.simtec.co.uk/products/SWABLE/resources.html
34      and FAQ http://www.simtec.co.uk/products/SWABLE/faq.html
35
36
37MTD
38---
39
40  The NAND and NOR support has been merged from the linux-mtd project.
41  Any problems, see http://www.linux-mtd.infradead.org/ for more
42  information or up-to-date versions of linux-mtd.
43
44
45IDE
46---
47
48  Both onboard IDE ports are supported, however there is no support for
49  changing speed of devices, PIO Mode 4 capable drives should be used.
50
51
52Maintainers
53-----------
54
55  This board is maintained by Simtec Electronics.
56
57
58Copyright 2004 Ben Dooks, Simtec Electronics
59