/linux-4.4.14/Documentation/devicetree/bindings/display/connector/ |
D | vga-connector.txt | 1 VGA Connector 11 - ddc-i2c-bus: phandle to the I2C bus that is connected to VGA DDC 15 The VGA connector internal connections are modeled using the OF graph bindings 18 The VGA connector has a single port that must be connected to a video source
|
/linux-4.4.14/drivers/vfio/pci/ |
D | Kconfig | 13 bool "VFIO PCI support for VGA devices" 16 Support for VGA extension to VFIO PCI. This exposes an additional 17 region on VGA devices for accessing legacy VGA addresses used by
|
/linux-4.4.14/Documentation/ |
D | vgaarbiter.txt | 2 VGA Arbiter 6 modern devices allow relocation of such ranges, some "Legacy" VGA devices 13 the legacy VGA arbitration task (besides other bus management tasks) when more 20 the operation of the VGA arbiter implemented for the Linux kernel. 39 scans all PCI devices and adds the VGA ones inside the arbitration. The 40 arbiter then enables/disables the decoding on different devices of the VGA 48 the default VGA device of the system. 123 These functions below acquire VGA resources for the given card and mark those 127 legacy resource lock. The arbiter will first look for all VGA cards that 128 might conflict and disable their IOs and/or Memory access, including VGA [all …]
|
D | svga.txt | 25 EXTENDED_VGA - Standard 8-pixel font mode: 80x43 on EGA, 80x50 on VGA. 60 -- it's either a generic adapter name (MDA, CGA, HGC, EGA, VGA, VESA VGA [a VGA 79 on the VGA BIOS). 125 0x0f01 standard with 8-point font: 80x43 on EGA, 80x50 on VGA 126 0x0f02 VGA 80x43 (VGA switched to 350 scanlines with a 8-point font) 127 0x0f03 VGA 80x28 (standard VGA scans, but 14-point font) 129 0x0f05 VGA 80x30 (480 scans, 16-point font) 130 0x0f06 VGA 80x34 (480 scans, 14-point font) 131 0x0f07 VGA 80x60 (480 scans, 8-point font) 143 0xfffe equivalent to 0x0f01 (EGA 80x43 or VGA 80x50) [all …]
|
D | VGA-softcursor.txt | 1 Software cursor for VGA by Pavel Machek <pavel@atrey.karlin.mff.cuni.cz> 24 (by simply XORing them with the value of this parameter). On standard VGA, 28 depends on the configuration of your VGA).
|
D | serial-console.txt | 36 virtual console, and kernel messages will appear on both the VGA 43 first looks for a VGA card and then for a serial port. So if you don't 44 have a VGA card in your system the first serial port will automatically
|
D | 00-INDEX | 66 VGA-softcursor.txt 67 - how to change your VGA cursor from a blinking underscore. 429 - short guide on selecting video modes at boot via VGA BIOS. 457 - info on enable/disable the legacy decoding on different VGA devices
|
D | kernel-parameters.txt | 125 VGA The VGA console has been enabled. 1075 The VGA and EFI output is eventually overwritten by 2131 2 - The VGA Shield is attached (1024x768) 2138 VGA shield. 2381 to work with serial and VGA consoles. 2561 no-scroll [VGA] Disables scrollback. 4072 see VGA-softcursor.txt. Default: 2 = underline.
|
D | devices.txt | 2558 133 = /dev/usb/sisusbvga1 First SiSUSB VGA device 2560 140 = /dev/usb/sisusbvga8 Eighth SISUSB VGA device
|
/linux-4.4.14/Documentation/ia64/ |
D | aliasing.txt | 107 several VGA devices. 109 "X" uses this to access VGA frame buffers. Using legacy_mem 111 different VGA cards. 169 mmap of 0x0-0x9FFFF /dev/mem by "hwinfo" on HP sx1000 with VGA enabled 173 0xA0000-0xBFFFF UC only (VGA frame buffer) 179 The kernel VGA driver may ioremap the VGA frame buffer at 0xA0000, 189 supported, as is the case with HP sx[12]000 machines with VGA 193 machines with VGA enabled), we must fail the mmap because there's no 197 that doesn't report the VGA frame buffer at all), we should fail the 200 mmap of 0xA0000-0xBFFFF legacy_mem by "X" on HP sx1000 with VGA disabled [all …]
|
D | serial.txt | 55 configure EFI with a single device (either a UART or a VGA 62 - Without an HCDP, Linux defaults to a VGA console unless you 91 - The EFI console path contains both a VGA device and a UART. 92 EFI and elilo use both, but Linux defaults to VGA. Remove 93 the VGA device from the EFI console path[3].
|
/linux-4.4.14/drivers/gpu/vga/ |
D | Kconfig | 2 bool "VGA Arbitration" if EXPERT 6 Some "legacy" VGA devices implemented on PCI typically have the same 10 enable VGA arbiter.
|
/linux-4.4.14/lib/fonts/ |
D | Kconfig | 24 bool "VGA 8x8 font" if FONTS 28 This is the "high resolution" font for the VGA frame buffer (the one 31 Note that this is a poor quality font. The VGA 8x16 font is quite a 38 bool "VGA 8x16 font" if FONTS 41 This is the "high resolution" font for the VGA frame buffer (the one 42 provided by the VGA text console 80x25 mode.
|
/linux-4.4.14/drivers/iio/amplifiers/ |
D | Kconfig | 9 tristate "Analog Devices AD8366 VGA" 14 SPI Dual-Digital Variable Gain Amplifier (VGA).
|
/linux-4.4.14/Documentation/fb/ |
D | fbcon.txt | 6 any standard text console driver, such as the VGA console, with the added 27 systems, they almost universally have VGA cards, so vga16fb and vesafb will 43 will still get a VGA console. 122 NOTE: For x86 machines, the standard console is the VGA console which 124 are controlled by the VGA console will be garbled. 157 the hardware. Thus, in a VGA console: 159 console ---> VGA driver ---> hardware. 161 Assuming the VGA driver can be unloaded, one must first unbind the VGA driver 162 from the console layer before unloading the driver. The VGA driver cannot be 192 usually VGA text mode) will take over. A few drivers (rivafb and i810fb) will [all …]
|
D | cirrusfb.txt | 57 called 'palette' instead of from the VGA registers. This code was
|
D | intel810.txt | 145 if specified, secondary/external VGA output will always be enabled. 146 Useful if the BIOS turns off the VGA port when no monitor is attached. 147 The external VGA monitor can then be attached without rebooting.
|
D | arkfb.txt | 12 - only BIOS initialized VGA devices supported
|
D | s3fb.txt | 16 - only BIOS initialized VGA devices supported
|
D | tgafb.txt | 32 can however be used with the standard VGA Text Console driver.
|
D | matroxfb.txt | 133 novga - disables VGA I/O ports. It is default if BIOS did not enable device. 136 vga - preserve state of VGA I/O ports. It is default. Driver does not 137 enable VGA I/O if BIOS did not it (it is not safe to enable it in 316 + feature connector of Mystique and Gx00 is set to VGA mode (it is disabled 328 + text mode uses 6 bit VGA palette instead of 8 bit (one of 262144 colors
|
D | modedb.txt | 48 To force the VGA output to be enabled and drive a specific mode say: 49 video=VGA-1:1280x1024@60me
|
D | sstfb.txt | 84 vgapass=0 vganopass Enable or disable VGA passthrou cable. 86 from the VGA board and not from the voodoo.
|
D | udlfb.txt | 9 USB wire. That hardware framebuffer is able to drive the VGA, DVI, or HDMI
|
D | uvesafb.txt | 76 vgapal Use the standard VGA registers for palette changes.
|
/linux-4.4.14/Documentation/video4linux/ |
D | cpia2_overview.txt | 6 up to CIF, and 15 fps for VGA frames. The STV0676 is an improved version, 7 which can handle up to 30 fps VGA. Both coprocessors can be attached to two 8 CMOS sensors - the vvl6410 CIF sensor and the vvl6500 VGA sensor. These will 9 be referred to as the 410 and the 500 sensors, or the CIF and VGA sensors.
|
D | README.cpia2 | 19 - Supports cameras with the Vision stv6410 (CIF) and stv6500 (VGA) cmos 21 - Image formats: VGA, QVGA, CIF, QCIF, and a number of sizes in between. 22 VGA and QVGA are the native image sizes for the VGA camera. CIF is done 26 - Sensor framerate is adjustable (up to 30 fps CIF, 15 fps VGA).
|
D | gspca.txt | 241 mr97310a 08ca:0111 Aiptek PenCam VGA+ 257 mr97310a 093a:010f All known VGA cams with this ID 272 pac7311 093a:260e Gigaware VGA PC Camera, Trust WB-3350p, SIGMA cam 2350 374 etoms 102c:6251 Qcam xxxxxx VGA 390 sq905c 2770:9052 Disney pix micro 2 (VGA)
|
D | cafe_ccic | 7 well, but that is a debugging aid which will be removed shortly). VGA and
|
/linux-4.4.14/Documentation/devicetree/bindings/display/bridge/ |
D | adi,adv7123.txt | 4 The ADV7123 is a digital-to-analog converter that outputs VGA signals from a 21 - Video port 1 for VGA output
|
/linux-4.4.14/drivers/video/console/ |
D | Kconfig | 8 bool "VGA text console" if EXPERT || !X86 16 display that complies with the generic VGA standard. Virtually 30 The scrollback buffer of the standard VGA console is located in 31 the VGA RAM. The size of this RAM is fixed and is quite small. 58 normal VGA driver will handle it.
|
/linux-4.4.14/arch/arm/boot/dts/ |
D | imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts | 17 model = "Eukrea MBIMXSD25 with the DVI-VGA Display"; 21 model = "DVI-VGA";
|
D | imx6q-tx6q-1010.dts | 60 VGA {
|
D | imx6dl-tx6u-801x.dts | 60 VGA {
|
D | imx6q-tx6q-1020.dts | 60 VGA {
|
D | imx53-tx53-x03x.dts | 41 VGA {
|
D | dove-sbc-a510.dts | 123 * - VGA DDC channel
|
D | imx28-tx28.dts | 363 panel-name = "VGA";
|
/linux-4.4.14/drivers/usb/misc/sisusbvga/ |
D | Kconfig | 21 Say Y here if you want a VGA text console via the USB dongle or 25 Note that this console supports VGA/EGA text mode only.
|
/linux-4.4.14/arch/avr32/boards/atngw100/ |
D | Kconfig | 27 This enables support for the EVKLCD100 (QVGA) or EVKLCD101 (VGA) 54 bool "VGA (640x480)"
|
/linux-4.4.14/drivers/eisa/ |
D | eisa.ids | 86 ALR3023 "ALR 16-bit VGA without Parallel port" 226 CPQ3001 "Compaq Advanced VGA" 443 DEC8101 "DEC VGA 1024 Graphics Adapter" 445 DEC8103 "DECpc VGA 1024 NI Graphics Adapter" 481 DELFC01 "Dell VGA Professional 16-bit" 508 ELS8041 "ELSA WINNER 1000 Enhanced VGA" 594 ICU0110 "Paradise VGA Plus 16 Video Adapter " 595 ICU0120 "Paradise VGA 1024 Video Adapter " 599 ICU0160 "ATI VGA Wonder XL24 Video Adapter" 700 ICU0780 "Diamond SpeedStar 24X VGA adapter" [all …]
|
/linux-4.4.14/Documentation/devicetree/bindings/display/panel/ |
D | edt,et057090dhu.txt | 1 Emerging Display Technology Corp. 5.7" VGA TFT LCD panel
|
D | sharp,ls037v7dw01.txt | 20 between QVGA and VGA mode and the scan direction. As these pins can be also
|
/linux-4.4.14/Documentation/arm/ |
D | Setup | 50 or VGA console character size. They should not be used for any other 53 It's generally a good idea to set these to be either standard VGA, or 60 This describes the character position of cursor on VGA console, and
|
D | Netwinder | 34 0x03c0 - 0x03df VGA
|
/linux-4.4.14/Documentation/console/ |
D | console.txt | 57 (S) VGA+ 62 'VGA+' is the name of the driver 90 framebuffer console to VGA console and vice versa, this feature also makes
|
/linux-4.4.14/Documentation/power/ |
D | s2ram.txt | 59 For example, the above happens to be the VGA device on my EVO, which I 62 PLL's, and it just _hangs_. Using the regular VGA console and letting X
|
D | video.txt | 78 safest to do your experiments with plain old VGA console. The vesafb
|
/linux-4.4.14/drivers/gpu/drm/imx/ |
D | Kconfig | 29 tristate "Support for TV and VGA displays"
|
/linux-4.4.14/arch/arm/mach-integrator/ |
D | impd1.c | 72 #define VGA 4 macro 74 #if PANEL == VGA
|
/linux-4.4.14/drivers/platform/chrome/ |
D | Kconfig | 36 the memory used to back VGA controller memory.
|
/linux-4.4.14/drivers/media/platform/ |
D | Kconfig | 75 tristate "AR device with color module M64278(VGA)" 81 This module supports VGA(640x480 pixels) resolutions.
|
/linux-4.4.14/Documentation/video4linux/bttv/ |
D | PROBLEMS | 35 Since I do not know much (better make that almost nothing) about VGA card
|
D | README.freeze | 71 VGA cards seems to cause trouble sometimes. I've also seen funny
|
/linux-4.4.14/arch/arm/mach-omap1/ |
D | Kconfig | 75 The OSK supports an optional add-on board with a Quarter-VGA
|
/linux-4.4.14/drivers/video/fbdev/ |
D | Kconfig | 180 Common utility functions useful to fbdev drivers of VGA-based 370 VGA chips used in the Rebel.com Netwinder and other machines. 390 Integraphics CyberPro 20x0 and 5000 VGA chips. This is used 553 tristate "VGA 16-color graphics support" 561 This is the frame buffer device driver for VGA 16 color graphic 728 tristate "Userspace VESA VGA graphics support" 746 bool "VESA VGA graphics support" 964 tristate "OpenCores VGA/LCD core 2.0 framebuffer support" 970 This enables support for the OpenCores VGA/LCD core. 972 The OpenCores VGA/LCD core is typically used together with [all …]
|
/linux-4.4.14/Documentation/filesystems/ |
D | sysfs-pci.txt | 106 desired, e.g. 0xa0000 for the VGA frame buffer. The application can then
|
/linux-4.4.14/Documentation/m68k/ |
D | kernel-options.txt | 466 your card is somehow VGA compatible, you can tell the kernel the base 467 address of the VGA register set, so it can change the color lookup 512 The defaults are 58;62;31;32 (VGA compatible). 718 VGA modes: 722 Please notice that the ECS and VGA modes require either an ECS or AGA
|
/linux-4.4.14/drivers/firmware/ |
D | Kconfig | 80 You must also enable the appropriate drivers (serial, VGA, etc.)
|
/linux-4.4.14/drivers/gpu/drm/ |
D | Kconfig | 136 run the Radeon in plain VGA mode.
|
/linux-4.4.14/drivers/media/i2c/soc_camera/ |
D | ov9640.c | 337 enum { QQCIF, QQVGA, QCIF, QVGA, CIF, VGA, SXGA }; in ov9640_res_roundup() enumerator
|
/linux-4.4.14/drivers/media/i2c/ |
D | Kconfig | 510 OV7670 VGA camera. It currently only works with the M88ALP01 580 This driver supports SR030PC30 VGA camera from Siliconfile
|
/linux-4.4.14/Documentation/networking/ |
D | arcnet-hardware.txt | 285 IRQ 9 - FREE (VGA vertical sync interrupt if enabled) 297 VGA and thus many VGA/SVGA cards do not support it. For this 306 - Avery's favourite: IRQ2 (actually IRQ9). Watch that VGA, though. 311 A0000 - VGA graphics memory (ok if you don't have VGA) 313 C0000 \ One of these is your VGA BIOS - usually C0000.
|
D | cs89x0.txt | 540 9 EGA/VGA display adapter 545 A000-C7FF VGA Graphics Adapter
|
/linux-4.4.14/Documentation/x86/ |
D | mtrr.txt | 33 a video (VGA) card on a PCI or AGP bus. Enabling write-combining
|
/linux-4.4.14/drivers/media/rc/ |
D | Kconfig | 184 IR Receiver and/or LCD/VFD/VGA display.
|
/linux-4.4.14/arch/x86/ |
D | Kconfig.debug | 37 Write kernel log output directly into the VGA buffer or to a serial
|
D | Kconfig | 1560 a video (VGA) card on a PCI or AGP bus. Enabling write-combining 2571 bool "Mark VGA/VBE/EFI FB as generic system framebuffer" 2578 This option, if enabled, marks VGA/VBE/EFI framebuffers as generic
|
/linux-4.4.14/drivers/tty/serial/8250/ |
D | Kconfig | 79 If you don't have a VGA card installed and you say Y here, the
|
/linux-4.4.14/arch/alpha/ |
D | Kconfig | 497 Support VGA on an arbitrary hose; needed for several platforms
|
/linux-4.4.14/drivers/usb/serial/ |
D | Kconfig | 39 If you don't have a VGA card installed and you say Y here, the
|
/linux-4.4.14/ |
D | MAINTAINERS | 9924 SMSC UFX6000 and UFX7000 USB to VGA DRIVER
|