| /linux-4.1.27/Documentation/devicetree/bindings/staging/iio/adc/ |
| D | mxs-lradc.txt | 10 - fsl,lradc-touchscreen-wires: Number of wires used to connect the touchscreen
13 disabled. 5 wires is valid for i.MX28 SoC only.
30 fsl,lradc-touchscreen-wires = <4>;
43 fsl,lradc-touchscreen-wires = <5>;
|
| /linux-4.1.27/Documentation/devicetree/bindings/input/touchscreen/ |
| D | ti-tsc-adc.txt | 6 ti,wires: Wires refer to application modes i.e. 4/5/8 wire touchscreen
19 connecting wires on touchscreen. We need to provide an
49 ti,wires = <4>;
|
| /linux-4.1.27/Documentation/devicetree/bindings/spi/ |
| D | spi-bus.txt | 60 - spi-tx-bus-width - (optional) The bus width(number of data wires) that
62 - spi-rx-bus-width - (optional) The bus width(number of data wires) that
66 It allows data in the SPI system to be transferred in 2 wires(DUAL) or 4 wires(QUAD).
|
| /linux-4.1.27/drivers/input/touchscreen/ |
| D | ti_am335x_tsc.c | 48 unsigned int wires; member
131 switch (ts_dev->wires) { in titsc_step_config()
158 switch (ts_dev->wires) { in titsc_step_config()
346 err = of_property_read_u32(node, "ti,wires", &ts_dev->wires); in titsc_parse_dt()
349 switch (ts_dev->wires) { in titsc_parse_dt()
|
| /linux-4.1.27/include/linux/platform_data/ |
| D | mmc-davinci.h | 19 u8 wires; member
|
| D | mmc-omap.h | 49 u8 wires; /* Used for the MMC driver on omap1 and 2420 */ member
|
| /linux-4.1.27/arch/arm/boot/dts/ |
| D | sama5d3xdm.dtsi | 26 atmel,adc-ts-wires = <4>;
|
| D | at91-cosino_mega2560.dts | 30 atmel,adc-ts-wires = <4>;
|
| D | at91-cosino.dtsi | 75 atmel,adc-ts-wires = <4>;
|
| D | imx28-cfa10058.dts | 85 fsl,lradc-touchscreen-wires = <4>;
|
| D | imx23-evk.dts | 95 fsl,lradc-touchscreen-wires = <4>;
|
| D | imx28-cfa10057.dts | 112 fsl,lradc-touchscreen-wires = <4>;
|
| D | imx28-cfa10055.dts | 126 fsl,lradc-touchscreen-wires = <4>;
|
| D | at91sam9rlek.dts | 144 atmel,adc-ts-wires = <4>;
|
| D | imx28-apf28dev.dts | 124 fsl,lradc-touchscreen-wires = <4>;
|
| D | imx28-m28evk.dts | 157 fsl,lradc-touchscreen-wires = <4>;
|
| D | at91sam9m10g45ek.dts | 153 atmel,adc-ts-wires = <4>;
|
| D | imx28-eukrea-mbmx28lc.dtsi | 190 fsl,lradc-touchscreen-wires = <4>;
|
| D | imx28-evk.dts | 186 fsl,lradc-touchscreen-wires = <4>;
|
| D | imx28-cfa10049.dts | 293 fsl,lradc-touchscreen-wires = <4>;
|
| D | at91-sama5d4ek.dts | 104 /*atmel,adc-ts-wires = <4>;*/ /* Set up ADC touch screen */
|
| D | am335x-pepper.dts | 502 ti,wires = <4>;
|
| D | imx28-tx28.dts | 467 fsl,lradc-touchscreen-wires = <4>;
|
| D | am335x-evm.dts | 647 ti,wires = <4>;
|
| D | am335x-evmsk.dts | 682 ti,wires = <4>;
|
| /linux-4.1.27/Documentation/devicetree/bindings/iio/adc/ |
| D | at91_adc.txt | 29 - atmel,adc-ts-wires: Number of touchscreen wires. Should be 4 or 5. If this
|
| /linux-4.1.27/arch/arm/mach-omap1/ |
| D | devices.c | 114 if (mmc_controller->slots[0].wires == 4 && !cpu_is_omap7xx()) { in omap1_mmc_mux()
130 if (mmc_controller->slots[1].wires == 4) { in omap1_mmc_mux()
|
| D | board-innovator.c | 355 .wires = 4,
|
| D | board-htcherald.c | 412 .wires = 4,
|
| /linux-4.1.27/arch/arm/mach-davinci/ |
| D | board-neuros-osd2.c | 164 .wires = 4,
|
| D | board-dm355-leopard.c | 201 .wires = 4,
|
| D | board-omapl138-hawk.c | 138 .wires = 4,
|
| D | board-dm355-evm.c | 343 .wires = 4,
|
| D | board-da830-evm.c | 241 .wires = 8,
|
| D | board-dm365-evm.c | 255 .wires = 4,
|
| D | board-dm644x-evm.c | 573 .wires = 4,
|
| D | board-da850-evm.c | 792 .wires = 4,
|
| /linux-4.1.27/drivers/mmc/host/ |
| D | davinci_mmc.c | 1219 pdata->wires = data; in mmc_parse_pdata()
1222 pdata->wires = 1; in mmc_parse_pdata()
1310 if (pdata && (pdata->wires == 4 || pdata->wires == 0)) in davinci_mmcsd_probe()
1313 if (pdata && (pdata->wires == 8)) in davinci_mmcsd_probe()
|
| D | omap.c | 1240 if (host->pdata->slots[id].wires >= 4) in mmc_omap_new_slot()
|
| /linux-4.1.27/Documentation/devicetree/bindings/bus/ |
| D | imx-weim.txt | 4 without wires. It simply means that this module was originally designed for
|
| /linux-4.1.27/Documentation/input/ |
| D | rotary-encoder.txt | 8 peripherals with two wires. The outputs are phase-shifted by 90 degrees
|
| D | joystick-parport.txt | 104 A, Turbo B, Select and Start, and is connected through 5 wires, then it is
106 also use 5 wires, but have more buttons. They will work as well, of course.
226 For the basic 1-button Multisystem joystick you connect its wires to the
|
| /linux-4.1.27/arch/arm/mach-omap2/ |
| D | board-n8x0.c | 449 .wires = 4,
|
| /linux-4.1.27/drivers/staging/panel/ |
| D | Kconfig | 159 be driving a serial LCD or a parallel one. Serial LCDs only use 2 wires
160 (SDA/SCL), while parallel ones use 2 or 3 wires for the control signals
|
| /linux-4.1.27/Documentation/w1/ |
| D | w1.generic | 4 signal wire (plus ground, so two wires).
|
| /linux-4.1.27/Documentation/ide/ |
| D | ide.txt | 204 short 40-wires cable which cannot be automatically detected - if this is not
|
| /linux-4.1.27/Documentation/spi/ |
| D | spi-summary | 13 The three signal wires hold a clock (SCK, often on the order of 10 MHz),
22 device, so those three signal wires may be connected to several chips
|
| /linux-4.1.27/Documentation/networking/ |
| D | README.ipw2200 | 98 to get you moving without wires on Linux.
|
| D | arcnet-hardware.txt | 108 | | wires
|
| /linux-4.1.27/Documentation/ |
| D | xillybus.txt | 55 building block, with electrical wires dangling on the sides for connection to
|