| /linux-4.4.14/drivers/ata/ |
| D | Kconfig | 27 NOTE: ATA enables basic SCSI support; *however*,
28 'SCSI disk support', 'SCSI tape support', or
29 'SCSI CDROM support' may also be needed,
54 This option adds support for ATA-related ACPI objects.
63 bool "SATA Zero Power Optical Disc Drive (ZPODD) support"
67 This option adds support for SATA Zero Power Optical Disc
69 support, and if enabled, will automatically power on/off the
77 bool "SATA Port Multiplier support"
80 This option adds support for SATA Port Multipliers
86 tristate "AHCI SATA support"
[all …]
|
| /linux-4.4.14/drivers/staging/comedi/ |
| D | Kconfig | 2 tristate "Data acquisition support (comedi)"
5 Enable support for a wide range of data acquisition devices
46 tristate "Comedi device bonding support"
49 Enable support for a driver to 'bond' (merge) multiple subdevices
58 tristate "Fake waveform generator support"
60 Enable support for the fake waveform generator.
69 tristate "Parallel port support"
71 Enable support for the standard parallel port.
82 Enable support for serial connected hardware
88 tristate "SSV Embedded Systems DIL/Net-PC support"
[all …]
|
| /linux-4.4.14/sound/soc/samsung/ |
| D | Kconfig | 2 tristate "ASoC support for Samsung"
8 Say Y or M if you want to add support for codecs attached to
10 select the audio interfaces to support below.
37 tristate "Audio support for Openmoko Neo1973 Smartphones (GTA02)"
43 Say Y here to enable audio support for the Openmoko Neo1973
47 tristate "SoC I2S Audio support for Jive"
52 Say Y if you want to add support for SoC audio on the Jive.
55 tristate "SoC I2S Audio support for WM8580 on SMDK"
61 Say Y if you want to add support for SoC audio on the SMDKs.
64 tristate "SoC I2S Audio support for WM8994 on SMDK"
[all …]
|
| /linux-4.4.14/sound/soc/pxa/ |
| D | Kconfig | 6 Say Y or M if you want to add support for codecs attached to
8 to select the audio interfaces to support below.
17 Say Y if you want to add support for codecs attached to
41 tristate "SoC Audio support for Sharp Zaurus SL-C7x0"
46 Say Y if you want to add support for SoC audio on Sharp
50 tristate "SoC Audio support for Sharp Zaurus SL-Cxx00"
55 Say Y if you want to add support for SoC audio on Sharp
59 tristate "SoC Audio support for Zipit Z2"
64 Say Y if you want to add support for SoC audio on Zipit Z2.
67 tristate "SoC Audio support for Poodle"
[all …]
|
| /linux-4.4.14/drivers/net/wireless/rt2x00/ |
| D | Kconfig | 2 tristate "Ralink driver support"
5 This will enable the support for the Ralink drivers,
21 tristate "Ralink rt2400 (PCI/PCMCIA) support"
27 This adds support for rt2400 wireless chipset family.
33 tristate "Ralink rt2500 (PCI/PCMCIA) support"
39 This adds support for rt2500 wireless chipset family.
45 tristate "Ralink rt2501/rt61 (PCI/PCMCIA) support"
54 This adds support for rt2501 wireless chipset family.
60 tristate "Ralink rt27xx/rt28xx/rt30xx (PCI/PCIe/PCMCIA) support"
71 This adds support for rt27xx/rt28xx/rt30xx wireless chipset family.
[all …]
|
| /linux-4.4.14/drivers/staging/fbtft/ |
| D | Kconfig | 16 Framebuffer support for the AGM1264K-FL LCD display (two Samsung KS0108 compatible chips)
22 Generic Framebuffer support for BD663474
28 Generic Framebuffer support for HX8340BN
34 Generic Framebuffer support for HX8347D
40 Generic Framebuffer support for HX8353D
46 Generic Framebuffer support for HX8357D
52 Generic Framebuffer support for ILI9163
58 Generic Framebuffer support for ILI9320
64 Generic Framebuffer support for ILI9325
70 Generic Framebuffer support for ILI9340
[all …]
|
| /linux-4.4.14/drivers/isdn/hardware/avm/ |
| D | Kconfig | 8 Enable support for AVM active ISDN cards.
13 tristate "AVM B1 ISA support"
16 Enable support for the ISA version of the AVM B1 card.
19 tristate "AVM B1 PCI support"
22 Enable support for the PCI version of the AVM B1 card.
25 bool "AVM B1 PCI V4 support"
28 Enable support for the V4 version of AVM B1 PCI card.
31 tristate "AVM T1/T1-B ISA support"
34 Enable support for the AVM T1 T1B card.
38 tristate "AVM B1/M1/M2 PCMCIA support"
[all …]
|
| /linux-4.4.14/drivers/net/ethernet/intel/ |
| D | Kconfig | 19 tristate "Intel(R) PRO/100+ support"
30 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
36 <http://www.intel.com/p/en_US/support/highlights/network/pro100plus>
45 tristate "Intel(R) PRO/1000 Gigabit Ethernet support"
52 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
54 For general information and support, go to the Intel support
57 <http://support.intel.com>
66 tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support"
76 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
78 For general information and support, go to the Intel support
[all …]
|
| /linux-4.4.14/drivers/char/agp/ |
| D | Kconfig | 19 write-combining with MTRR support on the AGP bus. Without it, OpenGL
30 tristate "ALI chipset support"
33 This option gives you AGP support for the GLX component of
45 tristate "ATI chipset support"
48 This option gives you AGP support for the GLX component of
52 tristate "AMD Irongate, 761, and 762 chipset support"
55 This option gives you AGP support for the GLX component of
59 tristate "AMD Opteron/Athlon64 on-CPU GART support"
62 This option gives you AGP support for the GLX component of
65 K8T400M, SiS755. It may also support other AGP bridges when loaded
[all …]
|
| /linux-4.4.14/sound/soc/tegra/ |
| D | Kconfig | 9 Say Y or M here if you want support for SoC audio on Tegra.
17 Say Y or M if you want to add support for codecs attached to the
19 machine drivers to support below.
25 Say Y or M if you want to add support for the Tegra20 DAS module.
27 support below.
34 Say Y or M if you want to add support for codecs attached to the
36 machine drivers to support below.
43 Say Y or M if you want to add support for the Tegra20 SPDIF interface.
44 You will also need to select the individual machine drivers to support
51 Say Y or M if you want to add support for the Tegra20 AHUB module.
[all …]
|
| /linux-4.4.14/drivers/thermal/ti-soc-thermal/ |
| D | Kconfig | 4 If you say yes here you get support for the Texas Instruments
5 OMAP4460+ on die bandgap temperature sensor support. The register
9 support.
12 bool "Texas Instruments SoCs thermal framework support"
16 If you say yes here you want to get support for generic thermal
23 bool "Texas Instruments OMAP3 thermal support"
27 If you say yes here you get thermal support for the Texas Instruments
38 bool "Texas Instruments OMAP4 thermal support"
42 If you say yes here you get thermal support for the Texas Instruments
49 support.
[all …]
|
| /linux-4.4.14/drivers/bluetooth/ |
| D | Kconfig | 30 Say Y here to compile support for Bluetooth USB devices into the
34 bool "Broadcom protocol support"
39 The Broadcom protocol support enables firmware and patchram
40 download support for Broadcom Bluetooth controllers.
42 Say Y here to compile support for Broadcom protocol.
45 bool "Realtek protocol support"
50 The Realtek protocol support enables firmware and configuration
51 download support for Realtek Bluetooth controllers.
53 Say Y here to compile support for Realtek protocol.
63 Say Y here to compile support for Bluetooth SDIO devices into the
[all …]
|
| /linux-4.4.14/arch/mips/bcm63xx/ |
| D | Kconfig | 1 menu "CPU support"
5 bool "support 3368 CPU"
10 bool "support 6328 CPU"
15 bool "support 6338 CPU"
20 bool "support 6345 CPU"
24 bool "support 6348 CPU"
29 bool "support 6358 CPU"
34 bool "support 6362 CPU"
39 bool "support 6368 CPU"
|
| /linux-4.4.14/drivers/dma/ |
| D | Kconfig | 6 bool "DMA Engine support"
60 bool "ARM PrimeCell PL080 or PL081 support"
66 which can provide DMA engine support
69 tristate "AMCC PPC440SPe ADMA support"
76 Enable support for the AMCC PPC440SPe RAID engines.
79 tristate "Atmel AHB DMA support"
86 tristate "Atmel XDMA support"
93 tristate "Analog Devices AXI-DMAC DMA support"
98 Enable support for the Analog Devices AXI-DMAC peripheral. This DMA
103 bool "ST-Ericsson COH901318 DMA support"
[all …]
|
| /linux-4.4.14/drivers/net/dsa/ |
| D | Kconfig | 9 tristate "Marvell 88E6060 ethernet switch chip support"
13 This enables support for the Marvell 88E6060 ethernet switch
21 tristate "Marvell 88E6085/6095/6095F/6131 ethernet switch chip support"
27 This enables support for the Marvell 88E6085/6095/6095F/6131
31 tristate "Marvell 88E6123/6161/6165 ethernet switch chip support"
36 This enables support for the Marvell 88E6123/6161/6165
40 tristate "Marvell 88E6171/6175/6350/6351 ethernet switch chip support"
45 This enables support for the Marvell 88E6171/6175/6350/6351
49 tristate "Marvell 88E6172/6176/6320/6321/6352 ethernet switch chip support"
54 This enables support for the Marvell 88E6172, 88E6176, 88E6320,
[all …]
|
| /linux-4.4.14/sound/soc/fsl/ |
| D | Kconfig | 6 tristate "Asynchronous Sample Rate Converter (ASRC) module support"
11 support for the Freescale CPUs.
16 tristate "Synchronous Audio Interface (SAI) module support"
22 support for the Freescale CPUs.
27 tristate "Synchronous Serial Interface module (SSI) support"
33 support for the Freescale CPUs.
38 tristate "Sony/Philips Digital Interface (S/PDIF) module support"
44 support for the Freescale CPUs.
49 tristate "Enhanced Serial Audio Interface (ESAI) module support"
54 (ESAI) support for the Freescale CPUs.
[all …]
|
| /linux-4.4.14/drivers/leds/ |
| D | Kconfig | 11 Say Y to enable Linux LED support. This allows control of supported
28 and kernel internal API to it. You'll need this to provide support
39 This option enables support for on-chip LED drivers found on Marvell
43 tristate "LED support for the AAT1290"
50 This option enables support for the LEDs on the AAT1290.
57 This option enables support for LEDs connected to the BCM6328
65 This option enables support for LEDs connected to the BCM6358
73 This option enables support for the LCD backlight using
79 tristate "LED support for LM3533"
83 This option enables support for the LEDs on National Semiconductor /
[all …]
|
| /linux-4.4.14/drivers/power/ |
| D | Kconfig | 2 bool "Power supply class support"
4 Say Y here to enable power supply class support. This allows
29 Say Y here to enable support APM status emulation using
33 tristate "Generic battery support using IIO"
36 Say Y here to enable support for the generic battery driver
40 tristate "MAX8925 battery charger support"
43 Say Y here to enable support for the battery charger in the Maxim
47 tristate "WM831X backup battery charger support"
50 Say Y here to enable support for the backup battery charger
54 tristate "WM831X PMU support"
[all …]
|
| /linux-4.4.14/net/netfilter/ipset/ |
| D | Kconfig | 2 tristate "IP set support"
6 This option adds IP set support to the kernel.
28 tristate "bitmap:ip set support"
31 This option adds the bitmap:ip set type support, by which one
37 tristate "bitmap:ip,mac set support"
40 This option adds the bitmap:ip,mac set type support, by which one
46 tristate "bitmap:port set support"
49 This option adds the bitmap:port set type support, by which one
55 tristate "hash:ip set support"
58 This option adds the hash:ip set type support, by which one
[all …]
|
| /linux-4.4.14/drivers/media/i2c/soc_camera/ |
| D | Kconfig | 4 tristate "imx074 support"
10 tristate "mt9m001 support"
17 tristate "mt9m111, mt9m112 and mt9m131 support"
24 tristate "mt9t031 support"
30 tristate "mt9t112 support"
36 tristate "mt9v022 and mt9v024 support"
42 tristate "ov2640 camera support"
48 tristate "ov5642 camera support"
54 tristate "ov6650 sensor support"
60 tristate "ov772x camera support"
[all …]
|
| /linux-4.4.14/drivers/media/usb/dvb-usb-v2/ |
| D | Kconfig | 17 tristate "Afatech AF9015 DVB-T USB2.0 support"
29 Say Y here to support the Afatech AF9015 based DVB-T USB2.0 receiver
32 tristate "Afatech AF9035 DVB-T USB2.0 support"
42 Say Y here to support the Afatech AF9035 based DVB USB receiver.
45 tristate "Anysee DVB-T/C USB2.0 support"
58 Say Y here to support the Anysee E30, Anysee E30 Plus or
62 tristate "Alcor Micro AU6610 USB2.0 support"
67 Say Y here to support the Sigmatek DVB-110 DVB-T USB2.0 receiver.
70 tristate "AzureWave 6007 and clones DVB-T/C USB2.0 support"
76 Say Y here to support the AZ6007 receivers like Terratec H7.
[all …]
|
| /linux-4.4.14/drivers/extcon/ |
| D | Kconfig | 2 tristate "External Connector Class (extcon) support"
4 Say Y here to enable external connector class (extcon) support.
18 tristate "ADC Jack extcon support"
24 tristate "Wolfson Arizona EXTCON support"
27 Say Y here to enable support for external accessory detection
29 advanced audio accessory detection support.
32 tristate "X-Power AXP288 EXTCON support"
35 Say Y here to enable support for USB peripheral detection
39 tristate "GPIO extcon support"
42 Say Y here to enable GPIO based extcon support. Note that GPIO
[all …]
|
| /linux-4.4.14/arch/powerpc/platforms/85xx/ |
| D | Kconfig | 21 When selected, this option enables cache-sram support
30 This option enables support for the Freescale BSC9131RDB board.
39 This option enables support for the C293PCIE board
45 This option enables support for the Freescale BSC9132 QDS board.
54 This option enables support for the MPC 8540 ADS board
61 This option enables support for the MPC 8560 ADS board
69 This option enables support for the MPC85xx CDS board
78 This option enables support for the MPC85xx MDS board
85 This option enables support for the MPC8536 DS board
94 This option enables support for the MPC85xx DS (MPC8544 DS) board
[all …]
|
| /linux-4.4.14/drivers/rapidio/switches/ |
| D | Kconfig | 5 tristate "IDT Tsi57x SRIO switches support"
7 Includes support for IDT Tsi57x family of serial RapidIO switches.
10 tristate "IDT CPS-xx SRIO switches support"
12 Includes support for IDT CPS-16/12/10/8 serial RapidIO switches.
15 tristate "Tsi568 SRIO switch support"
18 Includes support for IDT Tsi568 serial RapidIO switch.
21 tristate "IDT CPS Gen.2 SRIO switch support"
24 Includes support for ITD CPS Gen.2 serial RapidIO switches.
|
| /linux-4.4.14/arch/arm/mach-orion5x/ |
| D | Kconfig | 14 Say 'Y' here if you want your kernel to support the
21 Say 'Y' here if you want your kernel to support the
28 Say 'Y' here if you want your kernel to support the
36 Say 'Y' here if you want your kernel to support the Marvell
43 Say 'Y' here if you want your kernel to support the
51 Say 'Y' here if you want your kernel to support the
58 Say 'Y' here if you want your kernel to support the
64 Say 'Y' here if you want your kernel to support the
71 Say 'Y' here if you want your kernel to support the
79 Say 'Y' here if you want your kernel to support the
[all …]
|
| /linux-4.4.14/sound/soc/sh/ |
| D | Kconfig | 1 menu "SoC Audio support for SuperH"
5 tristate "SoC Audio support for Renesas SH7760"
8 Enable this option for SH7760 AC97/I2S audio support.
24 tristate "SH4 FSI support"
27 This option enables FSI sound support
38 tristate "R-Car series SRU/SCU/SSIU/SSI support"
44 This option enables R-Car SRU/SCU/SSIU/SSI sound support
56 tristate "SH7760 AC97 sound support"
61 This option enables generic sound support for the first
65 tristate "SIU sound support on Migo-R"
[all …]
|
| /linux-4.4.14/drivers/char/hw_random/ |
| D | Kconfig | 6 tristate "Hardware Random Number Generator Core support"
26 tristate "Timer IOMEM HW Random Number Generator support"
29 This driver provides kernel-side support for a generic Random
40 tristate "Intel HW Random Number Generator support"
44 This driver provides kernel-side support for the Random Number
53 tristate "AMD HW Random Number Generator support"
57 This driver provides kernel-side support for the Random Number
66 tristate "Atmel Random Number Generator support"
70 This driver provides kernel-side support for the Random Number
79 tristate "Broadcom BCM63xx Random Number Generator support"
[all …]
|
| /linux-4.4.14/drivers/net/ethernet/chelsio/ |
| D | Kconfig | 20 tristate "Chelsio 10Gb Ethernet support"
32 For customer support, please visit our customer support page at
33 <http://www.chelsio.com/support.html>.
41 bool "Chelsio gigabit Ethernet support"
44 Enables support for Chelsio's gigabit Ethernet PCI cards. If you
48 tristate "Chelsio Communications T3 10Gb Ethernet support"
59 For customer support, please visit our customer support page at
60 <http://www.chelsio.com/support.html>.
68 tristate "Chelsio Communications T4/T5 Ethernet support"
79 For customer support, please visit our customer support page at
[all …]
|
| /linux-4.4.14/drivers/net/wireless/ath/ath10k/ |
| D | Kconfig | 2 tristate "Atheros 802.11ac wireless cards support"
6 This module adds support for wireless adapters based on
12 tristate "Atheros ath10k PCI support"
15 This module adds support for PCIE bus
21 Enables debug support
26 bool "Atheros ath10k debugfs support"
30 Enabled debugfs support
35 bool "Atheros ath10k tracing support"
42 bool "Atheros DFS support for certified platforms"
46 This option enables DFS support for initiating radiation on
|
| /linux-4.4.14/arch/arm/mach-ep93xx/ |
| D | Kconfig | 14 Enable kernel support for MaverickCrunch.
21 Say 'Y' here if you want your kernel to support the ADS
31 Say 'Y' here if you want your kernel to support the Cirrus
38 Say 'Y' here if you want your kernel to support the Cirrus
45 Say 'Y' here if you want your kernel to support the Cirrus
52 Say 'Y' here if you want your kernel to support the Cirrus
59 Say 'Y' here if you want your kernel to support the Cirrus
66 Say 'Y' here if you want your kernel to support the Cirrus
73 Say 'Y' here if you want your kernel to support the Cirrus
80 Say 'Y' here if you want your kernel to support the Cirrus
[all …]
|
| /linux-4.4.14/arch/unicore32/configs/ |
| D | unicore32_defconfig | 8 # Initial RAM filesystem and RAM disk (initramfs/initrd) support
12 ### Enable loadable module support
24 ### Bus support
30 # others support: test_suspend=mem root=/dev/sda
31 # hibernate support: resume=/dev/sda3
45 ### Networking support
75 # Memory Technology Device (MTD) support
91 # SCSI device support
101 # Network device support
110 # Input device support
[all …]
|
| /linux-4.4.14/arch/arm64/ |
| D | Kconfig.platforms | 6 This enables support for Broadcom iProc based SoCs
13 This enables support for Marvell Berlin SoC Family
18 This enables support for Samsung Exynos SoC family
30 This enables support for Samsung Exynos7 SoC family
35 This enables support for the Freescale Layerscape SoC family.
40 This enables support for Hisilicon ARMv8 SoC family
53 This enables support for the ARMv8 based Qualcomm chipsets.
62 This enables support for the ARMv8 based Rockchip chipsets,
68 This enables support for AMD Seattle SOC Family
73 This enables support for Altera's Stratix 10 SoCFPGA Family.
[all …]
|
| /linux-4.4.14/arch/avr32/boards/hammerhead/ |
| D | Kconfig | 6 bool "Philips ISP116x-hcd USB support"
8 This enables USB support for Hammerheads internal ISP116x
14 bool "Atmel AT91/AT32 LCD support"
16 This enables LCD support for the Hammerhead board. You may
17 also add support for framebuffer devices (AT91/AT32 LCD Controller)
18 and framebuffer console support to get the most out of your LCD.
21 want to have support for your Hantronix HDA-351T-LV LCD.
24 bool "Atmel AC97 Sound support"
26 This enables Sound support for the Hammerhead board. You may
36 This adds support for the Cyclone III FPGA from Altera
[all …]
|
| /linux-4.4.14/drivers/ide/ |
| D | Kconfig | 10 tristate "ATA/ATAPI/MFM/RLL support (DEPRECATED)"
62 this config option enables the IDE driver's SATA support.
70 tristate "generic ATA/ATAPI disk support"
81 bool "ATA disk support"
85 This will include support for ATA hard disks.
90 bool "ATAPI floppy support"
94 This will include support for ATAPI floppy drives
104 tristate "PCMCIA IDE support"
111 tristate "Cardbus IDE support (Delkin/ASKA/Workbit)"
118 tristate "Include IDE/ATAPI CDROM support"
[all …]
|
| /linux-4.4.14/drivers/media/ |
| D | Kconfig | 6 tristate "Multimedia support"
16 comment "Multimedia core support"
19 # Multimedia support - automatically enable V4L2 and DVB core
22 bool "Cameras/video grabbers support"
24 Enable support for webcams and video grabbers.
29 bool "Analog TV support"
31 Enable analog TV support.
33 Say Y when you have a TV board with analog support or with a
37 support both analog and digital TV. Disabling this option
38 will disable support for them.
[all …]
|
| /linux-4.4.14/Documentation/fb/ |
| D | s3fb.txt | 35 * suspend/resume support
36 * DPMS support
43 support is broken on S3 Trio64 V2/DX.
47 with interleaved planes (1 byte interleave), MSB first. Both modes support
58 * secondary (not initialized by BIOS) device support
59 * big endian support
60 * Zorro bus support
61 * MMIO support
62 * 24 bpp mode support on more cards
63 * support for fontwidths != 8 in 4 bpp modes
[all …]
|
| D | arkfb.txt | 27 * suspend/resume support
38 with interleaved planes (1 byte interleave), MSB first. Both modes support
49 * secondary (not initialized by BIOS) device support
50 * big endian support
51 * DPMS support
52 * MMIO support
54 * support for fontwidths != 8 in 4 bpp modes
55 * support for fontheight != 16 in text mode
58 * feature connector support
59 * acceleration support (8514-like 2D)
|
| D | vt8623fb.txt | 25 * suspend/resume support
26 * DPMS support
35 with interleaved planes (1 byte interleave), MSB first. Both modes support
46 * secondary (not initialized by BIOS) device support
47 * MMIO support
49 * support for fontwidths != 8 in 4 bpp modes
50 * support for fontheight != 16 in text mode
52 * video overlay support
54 * acceleration support (8514-like 2D, busmaster transfers)
|
| /linux-4.4.14/drivers/media/rc/img-ir/ |
| D | Kconfig | 30 bool "NEC protocol support"
33 Say Y here to enable support for the NEC, extended NEC, and 32-bit
37 bool "JVC protocol support"
40 Say Y here to enable support for the JVC protocol in the ImgTec
44 bool "Sony protocol support"
47 Say Y here to enable support for the Sony protocol in the ImgTec
51 bool "Sharp protocol support"
54 Say Y here to enable support for the Sharp protocol in the ImgTec
58 bool "Sanyo protocol support"
61 Say Y here to enable support for the Sanyo protocol (used by Sanyo,
[all …]
|
| /linux-4.4.14/drivers/isdn/hardware/eicon/ |
| D | Kconfig | 8 Enable support for Eicon Networks active ISDN cards.
23 bool "DIVA Server BRI/PCI support"
25 Enable support for DIVA Server BRI-PCI.
28 bool "DIVA Server PRI/PCI support"
30 Enable support for DIVA Server PRI-PCI.
33 tristate "DIVA CAPI2.0 interface support"
39 tristate "DIVA User-IDI interface support"
41 Enable support for user-mode IDI interface.
44 tristate "DIVA Maint driver support"
|
| /linux-4.4.14/drivers/media/dvb-frontends/ |
| D | Kconfig | 13 to support this demodulator based frontends
21 demodulator. Say Y when you want to support this tuner.
29 Say Y when you want to support these frontends.
44 Say Y when you want to support this frontend.
56 Say Y when you want to support this frontend.
65 Say Y when you want to support this tuner.
74 Say Y when you want to support this frontend.
84 A DVB-S tuner module. Say Y when you want to support this frontend.
91 A DVB-S tuner module. Say Y when you want to support this frontend.
98 A DVB-S tuner module. Say Y when you want to support this frontend.
[all …]
|
| /linux-4.4.14/drivers/net/ethernet/stmicro/stmmac/ |
| D | Kconfig | 17 tristate "STMMAC Platform bus support"
22 This selects the platform specific bus support for the stmmac driver.
41 tristate "QCA IPQ806x DWMAC support"
48 This selects the IPQ806x SoC glue layer support for the stmmac
54 tristate "NXP LPC18xx/43xx DWMAC support"
62 tristate "Amlogic Meson dwmac support"
68 This selects the Amlogic Meson SoC glue layer support for
73 tristate "Rockchip dwmac support"
80 This selects the Rockchip RK3288 SoC glue layer support for
84 tristate "SOCFPGA dwmac support"
[all …]
|
| /linux-4.4.14/drivers/usb/host/ |
| D | Kconfig | 7 tristate "Cypress C67x00 HCD support"
12 Enable this option to support this chip in host controller mode.
19 tristate "xHCI HCD (USB 3.0) support"
45 tristate "xHCI support for Marvell Armada 375/38x"
49 Say 'Y' to enable the support for the xHCI host controller
53 tristate "xHCI support for Renesas R-Car SoCs"
57 Say 'Y' to enable the support for the xHCI host controller
63 tristate "EHCI HCD (USB 2.0) support"
90 controller doesn't support this feature.
126 tristate "EHCI support for on-chip PMC MSP71xx USB controller"
[all …]
|
| /linux-4.4.14/drivers/parisc/ |
| D | Kconfig | 4 bool "VSC/GSC/HSC bus support"
14 bool "HP-PB bus support"
29 bool "Lasi I/O support"
32 Say Y here to support the Lasi multifunction chip found in
40 bool "Wax I/O support"
43 Say Y here to support the Wax multifunction chip found in some
50 bool "EISA support"
55 incomplete and lacks support for card-to-host DMA.
60 bool "ISA support"
67 bool "PCI support"
[all …]
|
| /linux-4.4.14/arch/powerpc/platforms/44x/ |
| D | Kconfig | 7 This option enables support for the 47x family of processors and is
18 This option enables support for the IBM PPC440EP evaluation board.
31 This option enables support for the APM APM821xx Evaluation board.
41 This option enables support for the IBM PPC440GP evaluation board.
50 This option enables support for the ACube Sam440ep board.
59 This option enables support for the AMCC PPC440EPX evaluation board.
69 This option enables support for the AMCC PPC440GX "Taishan"
83 This option enables support for the AMCC PPC440SPe evaluation board.
93 This option enables support for the AMCC PPC440GRX evaluation board.
101 This option enables support for the PIKA Warp(tm) Appliance. The Warp
[all …]
|
| /linux-4.4.14/drivers/scsi/arm/ |
| D | Kconfig | 5 tristate "Acorn SCSI card (aka30) support"
9 This enables support for the Acorn SCSI card (aka30). If you have an
16 Say Y here to enable tagged queuing support on the Acorn SCSI card.
34 tristate "ARXE SCSI support"
43 Say Y here to compile in support for the SCSI controller.
46 tristate "CumanaSCSI II support"
49 This enables support for the Cumana SCSI II card. If you have an
53 tristate "EESOX support"
56 This enables support for the EESOX SCSI card. If you have an Acorn
60 tristate "PowerTec support"
[all …]
|
| /linux-4.4.14/sound/soc/omap/ |
| D | Kconfig | 16 tristate "HDMI audio support for OMAP4+ based SoCs"
19 For HDMI audio to work OMAPDSS HDMI support should be
31 tristate "SoC Audio support for Nokia N810"
37 Say Y if you want to add support for SoC audio on Nokia N810.
40 tristate "SoC Audio support for Nokia N900 (RX-51)"
47 Say Y if you want to add support for SoC audio on Nokia N900
51 tristate "SoC Audio support for Amstrad E3 (Delta) videophone"
56 Say Y if you want to add support for SoC audio device connected to
70 tristate "SoC Audio support for omap osk5912"
75 Say Y if you want to add support for SoC audio on osk5912.
[all …]
|
| /linux-4.4.14/drivers/net/wireless/rsi/ |
| D | Kconfig | 2 tristate "Redpine Signals Inc 91x WLAN driver support"
5 This option enabes support for RSI 1x1 devices.
9 bool "Redpine Signals Inc debug support"
13 Say Y, if you would like to enable debug support. This option
17 tristate "Redpine Signals SDIO bus support"
21 This option enables the SDIO bus support in rsi drivers.
25 tristate "Redpine Signals USB bus support"
29 This option enables the USB bus support in rsi drivers.
|
| /linux-4.4.14/arch/arm/mach-imx/ |
| D | Kconfig | 127 Include support for Freescale i.MX1 based platforms
144 Include support for MX21ADS platform. This includes specific
159 Include support for MX27ADS platform. This includes specific
179 Include support for MX27PDK platform. This includes specific
195 Include support for Visstrim_m10 platform and its different variants.
215 Include support for phyCARD-s (aka pca100) platform. This
222 Include support for Freescale i.MX27 based platforms
239 Include support for MX31ADS platform. This includes specific
248 Include support for the Wolfson Microelectronics 1133-EV1 PMU
261 Include support for mx31 based LILLY1131 modules. This includes
[all …]
|
| /linux-4.4.14/sound/soc/davinci/ |
| D | Kconfig | 11 Say Y or M here if you want audio support for TI SoC which uses eDMA.
21 tristate "Multichannel Audio Serial Port (McASP) support"
24 Say Y or M here if you want to have support for McASP IP found in
43 Say Y or M if you want to add support for SoC audio on AM33XX
49 tristate "SoC Audio support for DaVinci DM6446, DM355 or DM365 EVM"
54 Say Y if you want to add support for SoC audio on TI
65 Say Y if you want to add support for AIC3101 audio codec
73 Say Y if you want to add support for SoC On-chip voice codec
77 tristate "SoC Audio support for DaVinci DM6467 EVM"
83 Say Y if you want to add support for SoC audio on TI
[all …]
|
| /linux-4.4.14/arch/m68k/ |
| D | Kconfig.machine | 6 bool "Amiga support"
10 This option enables support for the Amiga series of computers. If
15 bool "Atari support"
19 This option enables support for the 68000-based Atari series of
25 bool "Macintosh support"
29 This option enables support for the Apple Macintosh series of
30 computers (yes, there is experimental support now, at least for part
33 Say N unless you're willing to code the remaining necessary support.
37 bool "Apollo support"
45 bool "VME (Motorola and BVM) support"
[all …]
|
| D | Kconfig.devices | 20 bool "/proc/hardware support"
22 Say Y here to support the /proc/hardware file, which gives you
28 bool "ARAnyM emulator support"
31 This option enables support for ARAnyM native features, such as
35 tristate "NatFeat block device support"
38 Say Y to include support for the ARAnyM NatFeat block device
46 Say Y to include support for the ARAnyM NatFeat console driver
51 tristate "NatFeat Ethernet support"
54 Say Y to include support for the ARAnyM NatFeat network device
59 bool "Atari EtherNAT Ethernet support"
[all …]
|
| D | Kconfig.bus | 6 bool "DIO bus support"
10 Say Y here to enable support for the "DIO" expansion bus used in
20 bool "Amiga Zorro (AutoConfig) bus support"
23 This enables support for the Zorro bus in the Amiga. If you have
31 bool "Amiga 1200/600 PCMCIA support"
34 Include support in the kernel for pcmcia on Amiga 1200 and Amiga
46 newer boards don't support it. If you have ISA, say Y, otherwise N.
49 bool "Atari ROM port ISA adapter support"
52 This option enables support for the ROM port ISA adapter used to
62 bool "PCI support"
|
| D | Kconfig.cpu | 4 prompt "CPU family support"
21 bool "Classic M68K CPU family support"
24 bool "Coldfire CPU family support"
60 bool "68020 support"
70 bool "68030 support"
79 bool "68040 support"
89 bool "68060 support"
101 Motorola 68328 processor support.
108 Motorola 68EX328 processor support.
115 Motorola 68VZ328 processor support.
[all …]
|
| /linux-4.4.14/drivers/gpio/ |
| D | Kconfig | 38 This enables GPIO support through the generic GPIO library.
80 kernel support. Those are common in custom and semicustom
104 Say yes here to support GPIO functionality for 74xx-compatible ICs
118 Say Y or M here to build support for the Altera PIO device.
123 tristate "AMD Promontory GPIO support"
133 Turn on GPIO support for Broadcom "Kona" chips.
136 tristate "BRCMSTB GPIO support"
142 Say yes here to enable GPIO support for Broadcom STB (BCM7XXX) SoCs.
145 tristate "CLPS711X GPIO support"
149 Say yes here to support GPIO on CLPS711X SoCs.
[all …]
|
| /linux-4.4.14/drivers/block/paride/ |
| D | Kconfig | 17 support into your kernel, you may answer Y here to build in the
31 support into your kernel, you may answer Y here to build in the
38 9660 CD-ROM file system support" below, because that's the file
47 support into your kernel, you may answer Y here to build in the
61 support into your kernel, you may answer Y here to build in the
77 If you chose to build PARIDE support into your kernel, you may
90 later fully support this driver.
99 This option enables support for the ATEN EH-100 parallel port IDE
102 support into your kernel, you may answer Y here to build in the
106 support.
[all …]
|
| /linux-4.4.14/drivers/nfc/nfcmrvl/ |
| D | Kconfig | 4 The core driver to support Marvell NFC devices.
6 This driver is required if you want to support
16 This driver provides support for Marvell NFC-over-USB devices:
19 Say Y here to compile support for Marvell NFC-over-USB driver
29 This driver provides support for Marvell NFC-over-UART devices
31 Say Y here to compile support for Marvell NFC-over-UART driver
40 This driver provides support for Marvell NFC-over-I2C devices.
42 Say Y here to compile support for Marvell NFC-over-I2C driver
51 This driver provides support for Marvell NFC-over-SPI devices.
53 Say Y here to compile support for Marvell NFC-over-SPI driver
|
| /linux-4.4.14/arch/powerpc/platforms/40x/ |
| D | Kconfig | 8 This option enables support for the AMCC 405EZ Acadia evaluation board.
17 This option enables support for the EP405/EP405PC boards.
26 This option enables support for the ESTEEM 195E Hotfoot board.
38 This option enables support for the AMCC PPC405EX evaluation board.
49 This option enables support for the AMCC PPC405EX board.
59 This option enables support for the IBM PPC405GP evaluation board.
68 This option enables generic support for Xilinx Virtex based boards.
70 The generic virtex board support matches any device tree which
85 This option enables support for PlatHome OpenBlockS 600 server
89 bool "Simple PowerPC 40x board support"
[all …]
|
| /linux-4.4.14/drivers/mmc/host/ |
| D | Kconfig | 8 tristate "ARM AMBA Multimedia Card Interface support"
12 Interface (PL180 and PL181) support. If you have an ARM(R)
29 tristate "Intel PXA25x/26x/27x Multimedia Card Interface support"
39 tristate "Secure Digital Host Controller Interface support"
73 tristate "SDHCI support on PCI bus"
98 tristate "SDHCI support for ACPI enumerated SDHCI controllers"
101 This selects support for ACPI enumerated SDHCI controllers,
113 This selects the common helper functions support for Secure Digital
121 tristate "SDHCI OF support for the Arasan SDHCI controllers"
133 tristate "SDHCI OF support for the Atmel SDMMC controller"
[all …]
|
| /linux-4.4.14/net/bridge/netfilter/ |
| D | Kconfig | 7 tristate "Ethernet Bridge nf_tables support"
12 tristate "Netfilter nf_table bridge meta support"
15 Add support for bridge dedicated meta key.
18 tristate "Netfilter nf_tables bridge reject support"
21 Add support to reject packets.
29 tristate "Ethernet Bridge tables (ebtables) support"
42 tristate "ebt: broute table support"
52 tristate "ebt: filter table support"
61 tristate "ebt: nat table support"
72 tristate "ebt: 802.3 filter support"
[all …]
|
| /linux-4.4.14/drivers/video/fbdev/omap2/dss/ |
| D | Kconfig | 5 tristate "OMAP2+ Display Subsystem support"
10 OMAP2+ Display Subsystem support.
15 bool "Debug support"
23 bool "Debugfs filesystem support"
43 bool "DPI support"
49 bool "RFBI support"
53 MIPI DBI support (RFBI, Remote Framebuffer Interface, in Texas
62 bool "VENC support"
65 OMAP Video Encoder support for S-Video and composite TV-out.
71 bool "HDMI support for OMAP4"
[all …]
|
| /linux-4.4.14/drivers/media/usb/dvb-usb/ |
| D | Kconfig | 17 bool "Enable extended debug support for all DVB-USB devices"
30 Say Y here to support the AVerMedia AverTV DVB-T USB 2.0 (A800) receiver.
99 tristate "HanfTek UMT-010 DVB-T USB2.0 support"
106 Say Y here to support the HanfTek UMT-010 USB2.0 stick-sized DVB-T receiver.
109 tristate "Conexant USB2.0 hybrid reference design support"
127 Say Y here to support the Conexant USB2.0 hybrid reference design.
135 tristate "Uli m920x DVB-T USB2.0 support"
143 Say Y here to support the MSI Mega Sky 580 USB2.0 DVB-T receiver.
149 tristate "Nebula Electronics uDigiTV DVB-T USB2.0 support"
155 Say Y here to support the Nebula Electronics uDigitV USB2.0 DVB-T receiver.
[all …]
|
| /linux-4.4.14/drivers/input/tablet/ |
| D | Kconfig | 15 tristate "Acecad Flair tablet support (USB)"
20 tablet. Make sure to say Y to "Mouse support"
21 (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
28 tristate "Aiptek 6000U/8000U and Genius G_PEN tablet support (USB)"
34 "Mouse support" (CONFIG_INPUT_MOUSEDEV) and/or "Event interface
35 support" (CONFIG_INPUT_EVDEV) as well.
45 CalComp/InterWrite Tablet. Make sure to say Y to "Mouse support"
46 (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
53 tristate "Hanwang Art Master III tablet support (USB)"
64 tristate "KB Gear JamStudio tablet support (USB)"
[all …]
|
| /linux-4.4.14/arch/powerpc/platforms/83xx/ |
| D | Kconfig | 18 This option enables support for the MPC8308 RDB and MPC8308 P1M boards.
25 This option enables support for the MPC8313 RDB and MPC8315 RDB boards.
32 This option enables support for the MPC832x MDS evaluation board.
39 This option enables support for the MPC8323 RDB board.
46 This option enables support for the MPC 834x MDS evaluation board.
58 This option enables support for the MPC 834x ITX evaluation board.
67 This option enables support for the MPC836x MDS Processor Board.
75 This option enables support for the MPC836x RDK Processor Board,
83 This option enables support for the MPC837x MDS Processor Board.
90 This option enables support for the MPC837x RDB and WLAN Boards.
[all …]
|
| /linux-4.4.14/drivers/pps/ |
| D | Kconfig | 2 # PPS support configuration
5 menu "PPS support"
8 tristate "PPS support"
16 host. In this case use the SERIAL_LINE client support.
19 inputs so you have to enable the corresponding client support.
28 Say Y here if you want the PPS support to produce a bunch of debug
30 problem with PPS support and want to see more of what is going on.
33 bool "PPS kernel consumer support"
36 This option adds support for direct in-kernel time
|
| /linux-4.4.14/arch/powerpc/platforms/ps3/ |
| D | Kconfig | 10 This option enables support for the Sony PS3 game console
53 This option will enable kernel support to take advantage of the
55 processor's IO Controller. This support incurs some runtime
59 This support is mainly for Linux kernel development. If unsure,
72 Include support for the PS3 AV Settings driver.
74 This support is required for PS3 graphics and sound. In
83 Include support for the PS3 System Manager.
85 This support is required for PS3 system control. In
89 bool "PS3 Repository write support" if PS3_ADVANCED
93 Enables support for writing to the PS3 System Repository.
[all …]
|
| /linux-4.4.14/drivers/net/wireless/ath/ath9k/ |
| D | Kconfig | 13 bool "Atheros bluetooth coexistence support"
21 tristate "Atheros 802.11n wireless cards support"
29 This module adds support for wireless adapters based on
41 bool "Atheros ath9k PCI/PCIe bus support"
45 This option enables the PCI bus support in ath9k.
50 bool "Atheros ath9k AHB bus support"
54 This option enables the AHB bus support in ath9k.
79 bool "Atheros DFS support for certified platforms"
83 This option enables DFS support for initiating radiation on
92 This is currently only a placeholder for future DFS support,
[all …]
|
| /linux-4.4.14/arch/arm/mach-netx/ |
| D | Kconfig | 5 bool "Enable Hilscher nxdkn Eval Board support"
8 Board support for the Hilscher NetX Eval Board
11 bool "Enable Hilscher nxdb500 Eval Board support"
15 Board support for the Hilscher nxdb500 Eval Board
18 bool "Enable Hilscher nxeb500hmi Eval Board support"
22 Board support for the Hilscher nxeb500hmi Eval Board
|
| /linux-4.4.14/drivers/dma/sh/ |
| D | Kconfig | 14 bool "Renesas SuperH DMA Engine support"
21 Enable support for the Renesas SuperH DMA controllers.
28 tristate "Renesas SuperH DMAC support"
31 Enable support for the Renesas SuperH DMA controllers.
51 tristate "Renesas R-Car HPB DMAC support"
54 Enable support for the Renesas R-Car series DMA controllers.
66 tristate "Renesas SUDMAC support"
69 Enable support for the Renesas SUDMAC controllers.
|
| /linux-4.4.14/sound/soc/cirrus/ |
| D | Kconfig | 2 tristate "SoC Audio support for the Cirrus Logic EP93xx series"
6 Say Y or M if you want to add support for codecs attached to
18 tristate "SoC Audio support for Bluewater Systems Snapper CL15 module"
23 Say Y or M here if you want to add support for I2S audio on the
27 tristate "SoC Audio support for Simplemachines Sim.One board"
32 Say Y or M here if you want to add support for AC97 audio on the
36 tristate "SoC Audio support for Cirrus Logic EDB93xx boards"
42 Say Y or M here if you want to add support for I2S audio on the
|
| /linux-4.4.14/drivers/pcmcia/ |
| D | Kconfig | 6 tristate "PCCard (PCMCIA/CardBus) support"
20 tristate "16-bit PCMCIA support"
24 This option enables support for 16-bit PCMCIA cards. Most older
52 bool "32-bit CardBus support"
69 tristate "CardBus yenta-compatible bridge support"
74 This option enables support for CardBus host bridges. Virtually
110 tristate "Cirrus PD6729 compatible bridge support"
114 This provides support for the Cirrus PD6729 PCI-to-PCMCIA bridge
118 tristate "i82092 compatible bridge support"
122 This provides support for the Intel I82092AA PCI-to-PCMCIA bridge device,
[all …]
|
| /linux-4.4.14/sound/soc/rockchip/ |
| D | Kconfig | 2 tristate "ASoC support for Rockchip"
5 Say Y or M if you want to add support for codecs attached to
7 select the audio interfaces to support below.
14 Say Y or M if you want to add support for I2S driver for
23 Say Y or M if you want to add support for SPDIF driver for
27 tristate "ASoC support for Rockchip boards using a MAX98090 codec"
33 Say Y or M here if you want to add support for SoC audio on Rockchip
37 tristate "ASoC support for Rockchip boards using a RT5645/RT5650 codec"
42 Say Y or M here if you want to add support for SoC audio on Rockchip
|
| /linux-4.4.14/drivers/usb/storage/ |
| D | Kconfig | 9 tristate "USB Mass Storage support"
19 This option depends on 'SCSI' support being enabled, but you
20 probably also need 'SCSI device support: SCSI disk support'
34 tristate "Realtek Card Reader support"
37 Say Y here to include additional code to support the power-saving function
43 bool "Realtek Card Reader autosuspend support"
48 tristate "Datafab Compact Flash Reader support"
57 tristate "Freecom USB/ATAPI Bridge support"
66 tristate "ISD-200 USB/ATA Bridge support"
84 tristate "USBAT/USBAT02-based storage support"
[all …]
|
| /linux-4.4.14/tools/power/cpupower/utils/helpers/ |
| D | misc.c | 5 int cpufreq_has_boost_support(unsigned int cpu, int *support, int *active, in cpufreq_has_boost_support() argument
11 *support = *active = *states = 0; in cpufreq_has_boost_support()
18 *support = 1; in cpufreq_has_boost_support()
22 *support = 1; in cpufreq_has_boost_support()
24 *support = *active = 1; in cpufreq_has_boost_support()
|
| /linux-4.4.14/arch/blackfin/mach-bf527/boards/ |
| D | Kconfig | 10 BF527-EZKIT-LITE board support.
15 BF527-EZKIT-LITE V2.1+ board support.
20 CM-BF527 support for EVAL- and DEV-Board.
25 BF526-EZBRD/EZKIT Lite board support.
30 BF527-AD7160-EVAL board support.
35 TLL6527M V1.0 platform support
|
| /linux-4.4.14/net/bluetooth/bnep/ |
| D | Kconfig | 2 tristate "BNEP protocol support"
10 Say Y here to compile BNEP support into the kernel or say M to
14 bool "Multicast filter support"
17 This option enables the multicast filter support for BNEP.
20 bool "Protocol filter support"
23 This option enables the protocol filter support for BNEP.
|
| /linux-4.4.14/drivers/i2c/ |
| D | Kconfig | 5 menu "I2C support"
8 tristate "I2C support"
18 hardware sensors support, and also for Video For Linux support.
20 If you want I2C support, you should say Y here and also to the
23 This I2C support can also be built as a module. If so, the module
27 bool "ACPI I2C Operation region support"
31 Say Y here if you want to enable ACPI I2C operation region support.
57 This support is also available as a module. If so, the module
61 tristate "I2C bus multiplexing support"
64 Say Y here if you want the I2C core to support the ability to
[all …]
|
| /linux-4.4.14/block/partitions/ |
| D | Kconfig | 18 bool "Acorn partition support" if PARTITION_ADVANCED
24 bool "Cumana partition support" if PARTITION_ADVANCED
32 bool "EESOX partition support" if PARTITION_ADVANCED
37 bool "ICS partition support" if PARTITION_ADVANCED
45 bool "Native filecore partition support" if PARTITION_ADVANCED
52 `Y' here, Linux will support disk partitions created under ADFS.
55 bool "PowerTec partition support" if PARTITION_ADVANCED
63 bool "RISCiX partition support" if PARTITION_ADVANCED
72 bool "AIX basic partition table support" if PARTITION_ADVANCED
83 bool "Alpha OSF partition support" if PARTITION_ADVANCED
[all …]
|
| /linux-4.4.14/drivers/net/ethernet/broadcom/ |
| D | Kconfig | 22 tristate "Broadcom 440x/47xx ethernet support"
34 # Auto-select SSB PCI-HOST support, if possible
54 tristate "Broadcom 63xx internal mac support"
63 tristate "Broadcom GENET internal MAC support"
73 tristate "QLogic bnx2 support"
84 tristate "QLogic CNIC support"
96 tristate "SB1250 Gigabit Ethernet support"
109 tristate "Broadcom Tigon3 support"
121 tristate "Broadcom NetXtremeII 10Gb support"
134 bool "Broadcom 578xx and 57712 SR-IOV support"
[all …]
|
| /linux-4.4.14/sound/aoa/codecs/ |
| D | Kconfig | 2 tristate "support Onyx chip"
6 This option enables support for the Onyx (pcm3052)
11 tristate "support TAS chips"
15 This option enables support for the tas chips
20 tristate "support Toonie chip"
22 This option enables support for the toonie codec
|
| /linux-4.4.14/drivers/media/usb/gspca/ |
| D | Kconfig | 29 Say Y here if you want support for the Benq DC E300 camera.
38 Say Y here if you want support for cameras based on the Conexant chip.
47 Say Y here if you want support for USB cameras based on the cpia
58 Say Y here if you want support for the Scopium camera
68 Say Y here if you want support for cameras based on the Etoms chip.
77 Say Y here if you want support for cameras based on the FinePix chip.
86 Say Y here if you want support for cameras based on this Jeilin chip.
95 Say Y here if you want support for cameras based the
105 Say Y here if you want support for the Microsoft Kinect sensor device.
114 Say Y here if you want support for cameras based on the Konica chip.
[all …]
|
| /linux-4.4.14/sound/pci/hda/ |
| D | Kconfig | 15 Say Y here to include support for Intel "High Definition
29 Say Y here to support the HDA controller present in NVIDIA
32 This options enables support for the HD Audio controller
85 tristate "Build Realtek HD-audio codec support"
89 Say Y or M here to include Realtek HD-audio codec support in
96 tristate "Build Analog Device HD-audio codec support"
99 Say Y or M here to include Analog Device HD-audio codec support in
106 tristate "Build IDT/Sigmatel HD-audio codec support"
109 Say Y or M here to include IDT (Sigmatel) HD-audio codec support in
116 tristate "Build VIA HD-audio codec support"
[all …]
|
| /linux-4.4.14/drivers/hwmon/pmbus/ |
| D | Kconfig | 6 tristate "PMBus support"
10 Say yes here if you want to enable PMBus support.
21 If you say yes here you get hardware monitoring support for generic
33 If you say yes here you get hardware monitoring support for Analog
44 If you say yes here you get hardware monitoring support for National
54 If you say yes here you get hardware monitoring support for Linear
62 bool "Regulator support for LTC2978 and compatibles"
65 If you say yes here you get regulator support for Linear
72 If you say yes here you get hardware monitoring support for Maxim
82 If you say yes here you get hardware monitoring support for Maxim
[all …]
|
| /linux-4.4.14/fs/ntfs/ |
| D | Kconfig | 2 tristate "NTFS file system support"
7 Saying Y or M here enables read support. There is partial, but
8 safe, write support available. For write support you must also
9 say Y to "NTFS write support" below.
13 without NTFS support enabled in the kernel.
15 This is a rewrite from scratch of Linux NTFS support and replaced
23 To compile this file system support as a module, choose M here: the
30 bool "NTFS debugging support"
52 bool "NTFS write support"
55 This enables the partial, but safe, write support in the NTFS driver.
[all …]
|
| /linux-4.4.14/arch/arm/mach-mmp/ |
| D | Kconfig | 9 Say 'Y' here if you want to support the Marvell PXA168-based
16 Say 'Y' here if you want to support the Marvell PXA168-based
23 Say 'Y' here if you want to support the Marvell PXA168-based
30 Say 'Y' here if you want to support the Marvell PXA910-based
37 Say 'Y' here if you want to support the Marvell PXA910-based
45 Say 'Y' here if you want to support the Marvell MMP2-based
56 Say 'Y' here if you want to support the Marvell MMP2-based
67 Say 'Y' here if you want to support the Marvell MMP2-base
77 Say 'Y' here if you want to support the Marvell PXA168-based
84 Say 'Y' here if you want to support the Marvell PXA168-based
[all …]
|
| /linux-4.4.14/sound/soc/blackfin/ |
| D | Kconfig | 7 Say Y or M if you want to add support for codecs attached to
10 You will also need to select the audio interfaces to support below.
13 tristate "SoC SSM2602 Audio Codec Add-On Card support"
20 Say Y if you want to add support for the Analog Devices
29 Say Y if you want to add support for the Analog Devices EVAL-ADAU1701MINIZ
39 Say Y if you want to add support for the Analog Devices EVAL-ADAU1373
52 Say Y if you want to add support for the Analog Devices EVAL-ADAU1X61
65 Say Y if you want to add support for the Analog Devices EVAL-ADAU1X81
79 Say Y if you want to add support for the Analog Devices EVAL-ADAV801 or
87 tristate "SoC AD1836 Audio support for BF5xx"
[all …]
|
| /linux-4.4.14/drivers/pwm/ |
| D | Kconfig | 4 Generic Pulse-Width Modulation (PWM) support.
36 tristate "AB8500 PWM support"
45 tristate "Atmel PWM support"
54 tristate "Atmel HLCDC PWM support"
66 tristate "Atmel TC Block PWM support"
78 tristate "Kona PWM support"
87 tristate "BCM2835 PWM support"
96 tristate "Marvell Berlin PWM support"
105 tristate "Blackfin PWM support"
114 tristate "Broadcom STB PWM support"
[all …]
|
| /linux-4.4.14/arch/arm/mach-sunxi/ |
| D | Kconfig | 14 bool "Allwinner A10 (sun4i) SoCs support"
18 bool "Allwinner A10s / A13 (sun5i) SoCs support"
23 bool "Allwinner A31 (sun6i) SoCs support"
30 bool "Allwinner A20 (sun7i) SoCs support"
38 bool "Allwinner sun8i Family SoCs support"
44 bool "Allwinner (sun9i) SoCs support"
|
| /linux-4.4.14/drivers/net/irda/ |
| D | Kconfig | 10 Say Y here if you want to build support for the IrTTY line
75 comment "Dongle support"
78 bool "Serial dongle support"
93 Say Y here if you want to build support for the Extended Systems
96 currently only be used by IrTTY. To activate support for ESI
104 Say Y here if you want to build support for the ACTiSYS IR-220L and
107 and can currently only be used by IrTTY. To activate support for
115 Say Y here if you want to build support for the Tekram IrMate 210B
118 currently only be used by IrTTY. To activate support for Tekram
126 Say Y here if you want to build support for the Vishay/Temic
[all …]
|
| /linux-4.4.14/Documentation/devicetree/bindings/power_supply/ |
| D | max8925_batter.txt | 5 - batt-detect: whether support battery detect
8 - no-temp-support: whether support temperature protection detect
9 - no-insert-detect: whether support insert detect
16 no-temp-support = <0>;
|
| /linux-4.4.14/drivers/iio/adc/ |
| D | Kconfig | 20 Say yes here to build support for Analog Devices AD7265 and AD7266
30 Say yes here to build support for Analog Devices AD7291
42 Say yes here to build support for Analog Devices AD7298
54 Say yes here to build support for Analog Devices AD7273, AD7274, AD7276,
66 Say yes here to build support for Analog Devices AD7787, AD7788, AD7789,
77 Say yes here to build support for Analog Devices AD7785, AD7792, AD7793,
89 Say yes here to build support for Analog Devices
101 Say yes here to build support for Analog Devices
113 Say yes here to build support for Analog Devices:
129 Say yes here to build support for Atmel AT91 ADC.
[all …]
|
| /linux-4.4.14/drivers/rtc/ |
| D | Kconfig | 14 Generic RTC class support. If you say yes here, you will
71 bool "RTC debug support"
73 Say yes here to enable debugging support in the RTC framework
131 If you say yes here you get support for the
151 If you say yes here you get support for RTC function in Marvell
161 If you say yes here you get support for RTC function in Marvell
171 If you say yes here you get support for the Abracon
180 If you say yes here you get support for Abracon AB080X and AB180X
191 If you say yes here you get support for the RTC of ams AS3722 PMIC
200 If you say yes here you get support for various compatible RTC
[all …]
|
| /linux-4.4.14/net/ipv6/netfilter/ |
| D | Kconfig | 13 tristate "IPv6 connection tracking support"
22 This is IPv6 support on Layer 3 independent connection tracking.
24 which generalize ip_conntrack to support other layer 3 protocols.
31 tristate "IPv6 nf_tables support"
33 This option enables the IPv6 support for nf_tables.
38 tristate "IPv6 nf_tables route chain support"
51 tristate "IPv6 nf_tables packet duplication support"
55 This module enables IPv6 packet duplication support for nf_tables.
90 tristate "IPv6 nf_tables nat chain support"
98 tristate "IPv6 masquerade support"
[all …]
|
| /linux-4.4.14/drivers/w1/slaves/ |
| D | Kconfig | 20 tristate "8-Channel Addressable Switch (IO Expander) 0x29 family support (DS2408)"
23 DS2408 8-Channel Addressable Switch device support
36 tristate "Dual Channel Addressable Switch 0x3a family support (DS2413)"
39 DS2413 Dual Channel Addressable Switch device support
42 tristate "Dual Channel Addressable Switch 0x12 family support (DS2406)"
47 support for these devices is not implemented.
61 tristate "1kb EEPROM family support (DS2431)"
67 tristate "4kb EEPROM family support (DS2433)"
85 chip support.
97 chip support.
[all …]
|
| /linux-4.4.14/drivers/video/fbdev/ |
| D | Kconfig | 138 bool "Framebuffer foreign endianness support"
141 This menu will let you enable support for the framebuffers with
147 prompt "Choice endianness support"
228 tristate "Aeroflex Gaisler framebuffer support"
234 This enables support for the SVGACTRL framebuffer in the GRLIB IP library from Aeroflex Gaisler.
237 tristate "Cirrus Logic support"
243 This enables support for Cirrus Logic GD542x/543x based boards on
246 If you have a PCI-based system, this enables support for these
255 tristate "Permedia2 support"
281 tristate "ARM PrimeCell PL110 support"
[all …]
|
| /linux-4.4.14/drivers/hid/ |
| D | Kconfig | 4 menu "HID support"
8 tristate "HID bus support"
34 This option adds support of reporting battery strength (for HID devices
35 that support this feature) through power_supply class so that userspace
39 bool "/dev/hidraw raw HID device support"
42 Say Y here if you want to support HID devices (from the USB
58 tristate "User-space I/O driver support for HID subsystem"
102 tristate "ACRUX game controller support"
105 Say Y here if you want to enable support for ACRUX game controllers.
108 bool "ACRUX force feedback support"
[all …]
|
| /linux-4.4.14/net/nfc/ |
| D | Kconfig | 8 tristate "NFC subsystem support"
11 Say Y here if you want to build support for NFC (Near field
14 To compile this support as a module, choose M here: the module will
21 tristate "NFC Digital Protocol stack support"
24 Say Y if you want to build NFC digital protocol stack support.
28 To compile this support as a module, choose M here: the module will
|
| /linux-4.4.14/drivers/net/wireless/ath/ath6kl/ |
| D | Kconfig | 2 tristate "Atheros mobile chipsets support"
5 This module adds core support for wireless adapters based on
14 tristate "Atheros ath6kl SDIO support"
18 This module adds support for wireless adapters based on
25 tristate "Atheros ath6kl USB support"
29 This module adds support for wireless adapters based on
38 Enables ath6kl debug support, including debug messages
45 bool "Atheros ath6kl tracing support"
57 bool "Atheros ath6kl regdomain support"
|
| /linux-4.4.14/drivers/media/pci/zoran/ |
| D | Kconfig | 6 Say Y for support for MJPEG capture cards based on the Zoran
16 tristate "Pinnacle/Miro DC30(+) support"
29 Say Y to support Zoran boards based on 36060 chips.
34 tristate "Iomega Buz support"
42 tristate "Pinnacle/Miro DC10(+) support"
51 tristate "Linux Media Labs LML33 support"
60 tristate "Linux Media Labs LML33R10 support"
65 support for the Linux Media Labs LML33R10 MJPEG capture/playback
69 tristate "AverMedia 6 Eyes support"
|
| /linux-4.4.14/drivers/infiniband/ |
| D | Kconfig | 2 tristate "InfiniBand support"
9 Core support for InfiniBand (IB). Make sure to also select
16 tristate "InfiniBand userspace MAD support"
19 Userspace InfiniBand Management Datagram (MAD) support. This
20 is the kernel side of the userspace MAD support, which allows
28 Userspace InfiniBand access support. This enables the
42 bool "InfiniBand on-demand paging support"
47 On demand paging support for the InfiniBand subsystem.
48 Together with driver support this allows registration of
|
| /linux-4.4.14/Documentation/sound/alsa/ |
| D | Joystick.txt | 9 First of all, you need to enable GAMEPORT support on Linux kernel for
11 support, refer to Documentation/input/joystick.txt.
13 The joystick support of ALSA drivers is different between ISA and PCI
16 built-in gameport support. Hence, when the ALSA PCI driver is built
18 gameport support on that card will be (silently) disabled.
30 joystick support is always enabled. In the former ALSA version, there
35 The following PCI drivers support the joystick natively.
62 The following drivers don't support gameport natively, but there are
64 support.
74 built-in gameport support.
[all …]
|
| /linux-4.4.14/fs/nfsd/ |
| D | Kconfig | 2 tristate "NFS server support"
13 protocol. To compile the NFS server support as a module,
37 bool "NFS server support for NFS version 3"
40 This option enables support in your system's NFS server for
46 bool "NFS server support for the NFSv3 ACL protocol extension"
50 Solaris NFS servers support an auxiliary NFSv3 ACL protocol that
57 This option enables support in your system's NFS server for the
60 clients which support the Solaris NFSv3 ACL protocol can then
69 bool "NFS server support for NFS version 4"
77 This option enables support in your system's NFS server for
[all …]
|
| /linux-4.4.14/drivers/gpu/drm/amd/amdgpu/ |
| D | Kconfig | 2 bool "Enable amdgpu support for CIK parts"
5 Choose this option if you want to enable experimental support
8 CIK is already supported in radeon. CIK support in amdgpu
12 bool "Always enable userptr write support"
17 selected to enabled full userptr support.
|
| /linux-4.4.14/net/bluetooth/rfcomm/ |
| D | Kconfig | 2 tristate "RFCOMM protocol support"
6 support is required for Dialup Networking, OBEX and other Bluetooth
9 Say Y here to compile RFCOMM support into the kernel or say M to
13 bool "RFCOMM TTY support"
17 This option enables TTY emulation support for RFCOMM channels.
|
| /linux-4.4.14/drivers/pci/host/ |
| D | Kconfig | 10 Enables support for the PCIe controller in the DRA7xx SoC. There
38 Say Y here if you want support for the PCIe host controller found
46 Say Y here if you want internal PCI support on R-Car Gen2 SoC.
55 Say Y here if you want PCIe controller support on R-Car Gen2 SoCs.
61 Say Y here if you want to support a simple generic PCI host
70 Say Y here if you want PCIe support on SPEAr13XX SoCs.
78 Say Y here if you want to enable PCI controller support on Keystone
84 bool "Xilinx AXI PCIe host bridge support"
87 Say 'Y' here if you want kernel to support the Xilinx AXI PCIe
97 Say Y here if you want internal PCI support on APM X-Gene SoC.
[all …]
|
| /linux-4.4.14/drivers/hwmon/ |
| D | Kconfig | 6 tristate "Hardware Monitoring support"
14 control the speed of the fans. If you want this support you
22 This support can also be built as a module. If so, the module
37 a problem with I2C support and want to see more of what is going
47 If you say yes here you get support for the thermal sensor part
59 If you say yes here you get support for the sensor part of the first
74 If you say yes here you get support for the sensor part of the
88 If you say yes here you get support for the Analog Devices
98 If you say yes here you get support for the Analog Devices
108 If you say yes here you get support for the Analog Devices
[all …]
|
| /linux-4.4.14/drivers/phy/ |
| D | Kconfig | 10 Generic PHY support.
23 Enable this to support the USB PHY on Marvell Berlin SoCs.
30 Enable this to support the SATA PHY on Marvell Berlin SoCs.
63 Enable this to support NXP LPC18xx/43xx internal USB OTG PHY.
65 This driver is need for USB0 support on LPC18xx/43xx and takes
73 Enable this to support Marvell USB HSIC PHY driver for Marvell
84 Enable this to support Marvell USB 2.0 PHY driver for Marvell
101 Enable this to support the miphy transceiver (for SATA/PCIE/USB3)
111 Enable this to support the miphy transceiver (for SATA/PCIE)
125 Enable this to add support for the PHY part present in the control
[all …]
|
| /linux-4.4.14/drivers/staging/gdm72xx/ |
| D | Kconfig | 6 tristate "GCT GDM72xx WiMAX support"
14 bool "Enable QoS support"
17 Enable Quality of Service support based on the data protocol of
24 Enable support for proprietary functions for KT (Korea Telecom).
27 bool "Enable WiMAX2 support"
30 Enable support for transmitting multiple packets (packet
55 bool "Enable power management support"
|
| /linux-4.4.14/drivers/net/wireless/orinoco/ |
| D | Kconfig | 2 tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)"
24 actually use a card you will also need to enable support for PCMCIA
36 Say Y to enable support for Prism 2 and 2.5 chipsets. These
38 would not support WPA or firmware download for Prism chipset.
58 tristate "Apple Airport support (built-in)"
61 Say Y here to support the Airport 802.11b wireless Ethernet hardware
66 This driver does not support the Airport Extreme (802.11b/g). Use
70 tristate "Hermes in PLX9052 based PCI adaptor support (Netgear MA301 etc.)"
73 Enable support for PCMCIA cards supported by the "Hermes" (aka
81 tristate "Hermes in TMD7160 based PCI adaptor support"
[all …]
|
| /linux-4.4.14/sound/pci/ |
| D | Kconfig | 16 Say Y here to include support for the integrated AC97 sound
30 Say 'Y' or 'M' to include support for Avance Logic ALS300/ALS300+
43 Say Y here to include support for soundcards based on Avance Logic
55 Say Y here to include support for the integrated AC97 sound
70 Say Y here to include support for AudioScience ASI sound cards.
79 Say Y here to include support for the integrated AC97 sound
90 Say Y here to include support for the integrated MC97 modem on
101 Say Y here to include support for Aureal Advantage soundcards.
104 3D support code is in place, but not yet useable. For more info,
115 Say Y here to include support for Aureal Vortex soundcards.
[all …]
|
| /linux-4.4.14/net/ipv4/netfilter/ |
| D | Kconfig | 13 tristate "IPv4 connection tracking support (required for NAT)"
22 This is IPv4 support on Layer 3 independent connection tracking.
24 which generalize ip_conntrack to support other layer 3 protocols.
42 tristate "IPv4 nf_tables support"
44 This option enables the IPv4 support for nf_tables.
49 tristate "IPv4 nf_tables route chain support"
62 tristate "IPv4 nf_tables packet duplication support"
66 This module enables IPv4 packet duplication support for nf_tables.
71 tristate "ARP nf_tables support"
73 This option enables the ARP support for nf_tables.
[all …]
|
| /linux-4.4.14/drivers/cpufreq/ |
| D | Kconfig.arm | 24 This add the CPUfreq driver support for Versatile Express
61 tristate "Freescale i.MX6 cpufreq support"
66 This adds cpufreq driver support for Freescale i.MX6 series SoCs.
85 bool "Mediatek MT8173 CPUFreq support"
91 This adds the CPUFreq driver support for Mediatek MT8173 SoC.
138 CPU Frequency scaling support for S3C2410
146 CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
149 bool "S3C2416 CPU Frequency scaling support"
171 bool "S3C2440/S3C2442 CPU Frequency scaling support"
176 CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
[all …]
|
| /linux-4.4.14/drivers/char/pcmcia/ |
| D | Kconfig | 9 tristate "SyncLink PC Card support"
12 Enable support for the SyncLink PC Card serial adapter, running
22 tristate "Omnikey Cardman 4000 support"
26 Enable support for the Omnikey Cardman 4000 PCMCIA Smartcard
29 This kernel driver requires additional userspace support, either
34 tristate "Omnikey CardMan 4040 support"
37 Enable support for the Omnikey CardMan 4040 PCMCIA Smartcard
47 tristate "IPWireless 3G UMTS PCMCIA card support"
|
| /linux-4.4.14/drivers/usb/phy/ |
| D | Kconfig | 17 Enable this to support the USB OTG transceiver in AB8500 chip.
26 Enable this to support Freescale USB OTG transceiver.
34 If you say yes here you get support for the Philips ISP1301
48 Enable this to support Keystone USB phy. This driver provides
70 This driver provides PHY support for that phy which part for the
76 Enable this to support Samsung USB phy helper driver for Samsung SoCs.
84 Enable this to support the USB OTG transceiver on TWL6030
105 Enable this to support some transceivers on OMAP1 platforms. OTG
116 Enable this to support USB transceiver on Tahvo. This is used
127 tristate "NXP ISP1301 USB transceiver support"
[all …]
|
| /linux-4.4.14/drivers/isdn/hardware/mISDN/ |
| D | Kconfig | 11 Enable support for cards with Cologne Chip AG's
19 Enable support for cards with Cologne Chip AG's HFC multiport
33 Enable support for the XHFC embedded solution from Speech Design.
39 Enable support for USB ISDN TAs with Cologne Chip AG's
48 Enable support for AVMs FRITZ!CARD PCI cards
57 Enable support for Sedlbauer Speedfax+.
65 Enable support for cards with ISAC + HSCX, IPAC or IPAC-SX
73 Enable support for Winbond 6692 PCI chip based cards.
84 Enable support for Traverse Technologies NETJet PCI cards.
|
| /linux-4.4.14/drivers/gpu/drm/gma500/ |
| D | Kconfig | 20 bool "Intel GMA600 support (Experimental)"
23 Say yes to include support for GMA600 (Intel Moorestown/Oaktrail)
27 bool "Intel GMA3600/3650 support (Experimental)"
30 Say yes to include basic support for Intel GMA3600/3650 (Intel
34 bool "Intel Medfield support (Experimental)"
37 Say yes to include support for the Intel Medfield platform.
|
| /linux-4.4.14/drivers/net/wireless/ti/wl1251/ |
| D | Kconfig | 2 tristate "TI wl1251 driver support"
7 This will enable TI wl1251 driver support. The drivers make
14 tristate "TI wl1251 SPI support"
17 This module adds support for the SPI interface of adapters using
25 tristate "TI wl1251 SDIO support"
28 This module adds support for the SDIO interface of adapters using
|
| /linux-4.4.14/drivers/input/misc/ |
| D | Kconfig | 16 tristate "88PM860x ONKEY support"
26 tristate "88PM80x ONKEY support"
48 Say Y here if you want to support an AD7142/3/7/8/7A touch sensor.
56 tristate "support I2C bus connection"
66 tristate "support SPI bus connection"
76 tristate "Arizona haptics support"
80 Say Y to enable support for the haptics module in Arizona CODECs.
86 tristate "BMA150/SMB380 acceleration sensor support"
97 tristate "NI Ettus Research USRP E3xx Button support."
100 Say Y here to enable support for the NI Ettus Research
[all …]
|
| /linux-4.4.14/drivers/net/wireless/brcm80211/ |
| D | Kconfig | 15 This module adds support for PCIe wireless adapters based on Broadcom
16 IEEE802.11n SoftMAC chipsets. It also has WLAN led support, which will
25 This module adds support for embedded wireless adapters based on
27 one of the bus interface support. If you choose to build a module,
37 bool "SDIO bus interface support for FullMAC driver"
44 This option enables the SDIO bus interface support for Broadcom
49 bool "USB bus interface support for FullMAC driver"
55 This option enables the USB bus interface support for Broadcom
60 bool "PCIE bus interface support for FullMAC driver"
67 This option enables the PCIE bus interface support for Broadcom
|
| /linux-4.4.14/sound/isa/ |
| D | Kconfig | 34 Say Y here to include support for AdLib FM cards.
48 Say Y here to include support for Analog Devices SoundPort
58 Say Y here to include support for AD1848 (Analog Devices) or
75 Say Y here to include support for soundcards based on the
89 Say Y here to include support for Aztech Sound Galaxy cards
102 Say Y here to include support for Aztech Sound Galaxy cards
116 Say Y here to include support for soundcards based on the
128 Say Y here to include support for soundcards based on the
141 Say Y here to include support for soundcards based on the
152 Say Y here to include support for CS4231 chips from Cirrus
[all …]
|
| /linux-4.4.14/sound/soc/atmel/ |
| D | Kconfig | 5 Say Y or M if you want to add support for codecs attached to
7 to select the audio interfaces to support below.
34 tristate "SoC Audio support for WM8731-based At91sam9g20 evaluation board"
40 Say Y if you want to add support for SoC audio on WM8731-based
50 Say Y if you want to add support for Atmel ASoC driver for boards using
54 tristate "SoC Audio support for WM8731-based at91sam9x5 board"
60 Say Y if you want to add support for audio SoC on an
69 Say Y if you want to add support for Atmel ASoC driver for boards using
|
| /linux-4.4.14/net/netfilter/ |
| D | Kconfig | 5 bool "Netfilter ingress support"
20 If this option is enabled, the kernel will include support
28 If this option is enabled, the kernel will include support
36 If this option is enabled, the kernel will include support
44 tristate "Netfilter connection tracking support"
53 filtering (see `Connection state match support' below).
63 bool 'Connection mark tracking support'
66 This option enables support for connection marks, used by the
72 bool 'Connection tracking security mark support'
89 This option enables support for connection tracking zones.
[all …]
|
| /linux-4.4.14/drivers/iio/pressure/ |
| D | Kconfig | 13 Say yes here to build support for Bosch Sensortec BMP280
27 Say yes here to build support for the HID SENSOR
37 Say yes here to build support for the Freescale MPL115A2
49 Say yes here to build support for the Freescale MPL3115A2
58 Say Y here to build support for the Measurement Specialties
65 tristate "support I2C bus connection"
68 Say Y here to build I2C bus support for MS5611.
74 tristate "support SPI bus connection"
77 Say Y here to build SPI bus support for MS5611.
87 If you say yes here you get support for the Measurement Specialties
[all …]
|
| /linux-4.4.14/drivers/staging/iio/adc/ |
| D | Kconfig | 12 Say yes here to build support for Analog Devices:
19 tristate "parallel interface support"
22 Say yes here to include parallel interface support on the AD7606
29 tristate "spi interface support"
33 Say yes here to include parallel interface support on the AD7606
45 Say yes here to build support for Analog Devices AD7170, AD7171,
57 Say yes here to build support for Analog Devices AD7816/7/8
65 Say yes here to build support for Analog Devices AD7190,
76 Say yes here to build support for Analog Devices AD7280A
87 Say yes here to build support for the integrated ADC inside the
[all …]
|
| /linux-4.4.14/arch/arm/mach-s3c64xx/ |
| D | Kconfig | 13 Enable S3C6400 CPU support
18 Enable S3C6410 CPU support
89 # S36400 Macchine support
97 Machine support for the Samsung SMDK6400
99 # S3C6410 machine support
107 Machine support for the A&W6410
122 Machine support for the FriendlyARM MINI6410
137 Machine support for the CoreWind REAL6410
164 Machine support for the Samsung SMDK6410
205 platform. Enabling this option will build support for this
[all …]
|
| /linux-4.4.14/drivers/net/ethernet/amd/ |
| D | Kconfig | 23 tristate "A2065 support"
34 tristate "AMD 8111 (new PCI LANCE) support"
46 tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
56 tristate "AMD PCnet32 PCI support"
68 tristate "Ariadne support"
78 bool "ARM EBSA110 AM79C961A support"
86 tristate "Atari LANCE support"
89 Say Y to include support for several Atari Ethernet adapters based
94 tristate "DEC LANCE ethernet controller support"
103 tristate "HP on-board LANCE support"
[all …]
|
| /linux-4.4.14/fs/nfs/ |
| D | Kconfig | 2 tristate "NFS client support"
10 this file system support as a module, choose M here: the module
33 tristate "NFS client support for NFS version 2"
37 This option enables support for version 2 of the NFS protocol
43 tristate "NFS client support for NFS version 3"
47 This option enables support for version 3 of the NFS protocol
53 bool "NFS client support for the NFSv3 ACL protocol extension"
56 Some NFS servers support an auxiliary NFSv3 ACL protocol that
67 Most NFS servers don't support the Solaris NFSv3 ACL protocol
75 tristate "NFS client support for NFS version 4"
[all …]
|
| /linux-4.4.14/drivers/net/ethernet/sfc/ |
| D | Kconfig | 2 tristate "Solarflare SFC4000/SFC9000/SFC9100-family support"
17 bool "Solarflare SFC4000/SFC9000/SFC9100-family MTD support"
25 bool "Solarflare SFC9000/SFC9100-family hwmon support"
32 bool "Solarflare SFC9000-family SR-IOV support"
36 This enables support for the SFC9000 I/O Virtualization
40 bool "Solarflare SFC9000/SFC9100-family MCDI logging support"
44 This enables support for tracing of MCDI (Management-Controller-to-
|
| /linux-4.4.14/arch/arm/mach-ixp4xx/ |
| D | Kconfig | 12 Say 'Y' here if you want your kernel to support Linksys's
20 Say 'Y' here if you want your kernel to support the Gateworks
28 Say 'Y' here if you want your kernel to support the Giant
36 Say 'Y' here if you want your kernel to support the ADI
44 Say 'Y' here if you want your kernel to support Gateway's
52 Say 'Y' here if you want your kernel to support Netgear's
59 Say 'Y' here if you want your kernel to support Intel's
66 Say 'Y' here if you want your kernel to support Intel's
73 Say 'Y' here if you want your kernel to support Intel's
80 Say 'Y' here if you want your kernel to support GORAMO
[all …]
|
| /linux-4.4.14/arch/sh/drivers/dma/ |
| D | Kconfig | 1 menu "DMA support"
5 bool "SuperH on-chip DMA controller (DMAC) support"
20 bool "SuperH DMA API support"
43 bool "SH7760 DMABRG support"
51 tristate "PowerVR 2 DMAC support"
54 Selecting this will enable support for the PVR2 DMA controller.
64 tristate "G2 Bus DMA support"
68 This enables support for the DMA controller for the Dreamcast's
|
| /linux-4.4.14/drivers/net/ethernet/i825xx/ |
| D | Kconfig | 20 tristate "Acorn Ether1 support"
27 tristate "BVME6000 Ethernet support"
39 Say Y here to support the builtin Intel 82596 ethernet controller
43 tristate "MVME16x Ethernet support"
55 Say Y here to support the on-board Intel 82596 ethernet controller
59 bool "Sun3 on-board Intel 82586 support"
62 This driver enables support for the on-board Intel 82586 based
64 that this driver does not support 82586-based adapters on additional
|
| /linux-4.4.14/Documentation/arm/Samsung-S3C24XX/ |
| D | S3C2412.txt | 22 No support for suspend/resume to RAM in the current system.
28 No current support for DMA.
34 There is support for setting the GPIO to input/output/special function
63 No current support in the kernel
90 No current support for the MMC/SD/SDIO block.
102 No current support for the IIS interface.
108 No current support for the SPI interfaces.
114 No current support for the on-board ATA block.
|
| /linux-4.4.14/drivers/video/fbdev/omap/ |
| D | Kconfig | 2 tristate "OMAP frame buffer support"
12 bool "External LCD controller support"
15 Say Y here, if you want to have support for boards with an
19 bool "Epson HWA742 LCD controller support"
22 Say Y here if you want to have support for the external
35 bool "MIPI DBI-C/DCS compatible LCD support"
38 Say Y here if you want to have support for LCDs compatible with
48 Say Y here if you want to have support for the LCD on the
|
| /linux-4.4.14/drivers/staging/wilc1000/ |
| D | Kconfig | 2 bool "WILC1000 support (WiFi only)"
5 This module only support IEEE 802.11n WiFi.
37 bool "SDIO support"
41 This module adds support for the SDIO interface of adapters using
53 bool "SPI support"
55 This module adds support for the SPI interface of adapters using
69 This option enables out-of-band interrupt support for the WILC1000
71 mechanism for SDIO host controllers that don't support SDIO interrupt.
73 doesn't support SDIO time devision interrupt.
|
| /linux-4.4.14/drivers/mfd/ |
| D | Kconfig | 46 Say yes here to add support for Analog Devices AD5520 and ADP5501,
58 If you say yes here you get support for the AAT2870.
59 This driver provides common support for accessing the device,
68 Select this to get support for Atmel Flexcom. This is a wrapper
80 If you say yes here you get support for the HLCDC block.
81 This driver provides common support for accessing the device,
100 If you say Y here you get support for the X-Powers AXP202, AXP209 and
113 If you say Y here you get support for the ChromeOS Embedded
123 If you say Y here, you get support for talking to the ChromeOS
133 If you say Y here, you get support for talking to the ChromeOS EC
[all …]
|
| /linux-4.4.14/arch/blackfin/mach-bf533/boards/ |
| D | Kconfig | 10 BF533-EZKIT-LITE board support.
15 BF533-STAMP board support.
27 CM-BF533 support for EVAL- and DEV-Board.
33 HV Sistemas H8606 board support.
39 Core support for IP04/IP04 open hardware IP-PBX.
|
| /linux-4.4.14/drivers/net/wireless/ti/wl12xx/ |
| D | Kconfig | 2 tristate "TI wl12xx support"
6 This module adds support for wireless adapters based on TI wl1271,
8 support for wl1251. For wl1251 support, use the separate homonymous
|
| /linux-4.4.14/drivers/regulator/ |
| D | Kconfig | 4 Generic Voltage and Current Regulator support.
27 bool "Regulator debug support"
29 Say yes here to enable debugging support.
32 tristate "Fixed voltage regulator support"
34 This driver provides support for fixed voltage regulators,
39 tristate "Virtual regulator consumer support"
49 tristate "Userspace regulator consumer support"
64 It's suitable to support PXA988 chips to control VCC_MAIN and
92 Say y here to support Freescale i.MX on-chip ANATOP LDOs
131 This driver provides support for the voltage regulators on the
[all …]
|
| /linux-4.4.14/sound/firewire/ |
| D | Kconfig | 16 tristate "DICE-based DACs support"
20 Say Y here to include support for many DACs based on the DICE
27 tristate "Oxford Semiconductor FW970/971 chipset support"
31 Say Y here to include support for FireWire devices based on
50 Say Y here to include support for the front and rear microphones
60 Say Y here to include support for the MIDI ports of the Stanton
68 tristate "Echo Fireworks board module support"
72 Say Y here to include support for FireWire devices based
88 Say Y here to include support for FireWire devices based
125 tristate "Digidesign Digi 002/003 family support"
[all …]
|
| /linux-4.4.14/drivers/net/ethernet/marvell/ |
| D | Kconfig | 20 tristate "Marvell Discovery (643XX) and Orion ethernet support"
33 tristate "Marvell MDIO interface support"
44 tristate "Marvell Armada 370/38x/XP network interface support"
57 tristate "Marvell Armada 375 network interface support"
65 tristate "Marvell pxa168 ethernet support"
76 tristate "Marvell Yukon Gigabit Ethernet support"
80 This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx
82 with better performance and more complete ethtool support.
84 It does not support the link failover and network management
91 It does not support the newer Yukon2 chipset: a separate driver,
[all …]
|
| /linux-4.4.14/drivers/power/reset/ |
| D | Kconfig | 47 This driver provides restart support for Broadcom STB boards.
50 to have restart support.
72 Reboot support for Hisilicon boards.
78 This driver support power off external PMIC by PMIC_ON_REQ on i.mx6
87 Power off and restart support for Qualcomm boards.
116 Reset support for STMicroelectronics boards.
124 Power off and restart support for ARM Versatile family of
132 Power off and reset support for the ARM Ltd. Versatile
139 Reboot support for the APM SoC X-Gene Eval boards.
146 Reboot support for the KEYSTONE SoCs.
[all …]
|
| /linux-4.4.14/sound/aoa/soundbus/ |
| D | Kconfig | 2 tristate "Apple Soundbus support"
6 support on Apple machines.
11 tristate "I2S bus support"
14 This option enables support for Apple I2S busses.
|
| /linux-4.4.14/fs/ |
| D | Kconfig.binfmt | 2 bool "Kernel support for ELF binaries"
9 and enlarge it by about 13 KB. ELF support under Linux has now all
34 bool "Kernel support for FDPIC ELF binaries"
69 tristate "Kernel support for scripts starting with #!"
75 You can build this support as a module; however, until that module
83 bool "Kernel support for flat binaries"
89 bool "Enable ZFLAT support"
96 bool "Enable shared FLAT support"
105 tristate "Kernel support for a.out and ECOFF binaries"
118 occasional use for this format, enable module support above
[all …]
|
| /linux-4.4.14/arch/xtensa/configs/ |
| D | common_defconfig | 49 # Loadable module support
89 # PCCARD (PCMCIA/CardBus) support
127 # Parallel port support
132 # Plug and Play support
162 # ATA/ATAPI/MFM/RLL support
167 # SCSI device support
172 # Multi-device support (RAID and LVM)
177 # Fusion MPT device support
181 # IEEE 1394 (FireWire) support
186 # I2O device support
[all …]
|
| /linux-4.4.14/arch/sh/boards/mach-highlander/ |
| D | Kconfig | 8 bool "R7780RP-1 board support"
12 bool "R7780MP board support"
15 Selecting this option will enable support for the mass-production
19 bool "R7785RP board support"
|
| /linux-4.4.14/arch/blackfin/mach-bf537/boards/ |
| D | Kconfig | 10 BF537-STAMP board support.
16 CM-BF537E support for EVAL- and DEV-Board.
22 CM-BF537U support for EVAL- and DEV-Board.
28 TCM-BF537 support for EVAL- and DEV-Board.
34 PNAV board support.
|
| /linux-4.4.14/drivers/soc/ti/ |
| D | Kconfig | 5 bool "TI SOC drivers support"
13 Say y here to support the Keystone multicore Navigator Queue
14 Manager support. The Queue Manager is a hardware module that
22 tristate "TI Keystone Navigator Packet DMA support"
25 Say y tp enable support for the Keystone Navigator Packet DMA on
|
| /linux-4.4.14/arch/mips/bcm47xx/ |
| D | Kconfig | 17 Add support for old Broadcom BCM47xx boards with Sonics Silicon Backplane support.
19 This will generate an image with support for SSB and MIPS32 R1 instruction set.
33 Add support for new Broadcom BCM47xx boards with Broadcom specific Advanced Microcontroller Bus.
35 This will generate an image with support for BCMA and MIPS32 R2 instruction set.
|
| /linux-4.4.14/drivers/staging/fsl-mc/ |
| D | TODO | 2 and if so add support for this.
6 driver support, which depends on drivers for several objects: DPNI,
9 * interrupt support. for meaningful driver support we need
10 interrupts, and thus need message interrupt support by the bus
12 -Note: this has dependencies on generic MSI support work
|
| /linux-4.4.14/drivers/net/ethernet/qlogic/ |
| D | Kconfig | 42 Virtualization support for QLE83XX Converged Ethernet devices.
51 This configuration parameter enables DCB support in QLE83XX
53 get operations support through rtNetlink interface. Only CEE
58 bool "Virtual eXtensible Local Area Network (VXLAN) offload support"
62 This enables hardware offload support for VXLAN protocol over QLogic's
64 Say Y here if you want to enable hardware offload support for
68 bool "QLOGIC QLCNIC 82XX and 83XX family HWMON support"
92 This enables the support for NetXen's Gigabit Ethernet card.
99 This enables the support for ...
105 This enables the support for ...
|
| /linux-4.4.14/arch/arm/mach-realview/ |
| D | Kconfig | 14 Include support for booting the ARM(R) RealView(R) evaluation
21 Include support for the ARM(R) RealView(R) Emulation Baseboard
33 Enable support for the Cortex-A9MPCore tile fitted to the
46 Enable support for the ARM11MPCore tile fitted to the Realview(R)
53 Enable support for the ARM11MPCore Revision B tile on the
69 Include support for the ARM(R) RealView(R) Platform Baseboard for
71 support for PCI-E and Compact Flash.
81 Include support for the ARM(R) RealView(R) Platform Baseboard for
99 Include support for the ARM(R) RealView Platform Baseboard for
101 support for PCI-E and Compact Flash.
[all …]
|
| /linux-4.4.14/drivers/i2c/busses/ |
| D | Kconfig | 5 menu "I2C Hardware Bus support"
15 If you say yes to this option, support will be included for the SMB
27 If you say yes to this option, support will be included for the SMB
39 If you say yes to this option, support will be included for the
49 If you say yes to this option, support will be included for the AMD
51 support for the first (SMBus 1.0) I2C interface of the AMD 8111 and
61 Enabling this option will add specific SMBus support for the Tyan
74 If you say yes to this option, support will be included for the
84 Say Y here to include support for high-speed I2C controller in the
95 If you say yes to this option, support will be included for the Intel
[all …]
|
| /linux-4.4.14/drivers/net/ethernet/brocade/bna/ |
| D | Kconfig | 6 tristate "QLogic BR-series 1010/1020/1860 10Gb Ethernet Driver support"
14 For general information and support, go to the QLogic support
17 <http://support.qlogic.com>
|
| /linux-4.4.14/arch/arm/mach-mediatek/ |
| D | Kconfig | 13 bool "MediaTek MT6589 SoCs support"
17 bool "MediaTek MT6592 SoCs support"
21 bool "MediaTek MT8127 SoCs support"
25 bool "MediaTek MT8135 SoCs support"
|
| /linux-4.4.14/drivers/isdn/hisax/ |
| D | Kconfig | 5 tristate "HiSax SiemensChipSet driver support"
93 This enables HiSax support for the Teles ISDN-cards S0-16.0, S0-8
103 This enables HiSax support for the Teles ISDN-cards S0-16.3 the
114 This enables HiSax support for the Teles PCI.
120 This enables HiSax support for the Teles/Creatix parallel port
128 This enables HiSax support for the AVM A1 (aka "Fritz").
138 This enables HiSax support for the AVM "Fritz!PnP" and "Fritz!PCI".
144 This enables HiSax support for the AVM A1 "Fritz!PCMCIA").
150 This enables HiSax support for the Elsa Mircolink ISA cards, for the
161 This enables HiSax support for the ITK ix1-micro Revision 2 card.
[all …]
|
| /linux-4.4.14/net/mpls/ |
| D | Kconfig | 19 tristate "MPLS: GSO support"
26 tristate "MPLS: routing support"
28 Add support for forwarding of mpls packets.
31 tristate "MPLS: IP over MPLS tunnel support"
34 mpls ip tunnel support.
|
| /linux-4.4.14/drivers/media/usb/au0828/ |
| D | Kconfig | 3 tristate "Auvitek AU0828 support"
20 bool "Auvitek AU0828 v4l2 analog video support"
28 Choose Y here to include support for v4l2 analog video
32 bool "AU0828 Remote Controller support"
36 Enables Remote Controller support on au0828 driver.
|
| /linux-4.4.14/sound/soc/qcom/ |
| D | Kconfig | 2 tristate "ASoC support for QCOM platforms"
5 Say Y or M if you want to add support to use audio devices
27 tristate "ASoC I2S support for Storm boards"
32 Say Y or M if you want add support for SoC audio on the
36 tristate "SoC Audio support for APQ8016 SBC platforms"
|
| /linux-4.4.14/drivers/net/wireless/ath/wcn36xx/ |
| D | Kconfig | 2 tristate "Qualcomm Atheros WCN3660/3680 support"
5 This module adds support for wireless adapters based on
11 bool "WCN36XX debugfs support"
14 Enabled debugfs support
|
| /linux-4.4.14/drivers/net/ethernet/8390/ |
| D | Kconfig | 20 tristate "Asix AX88190 PCMCIA support"
32 tristate "ASIX AX88796 NE2000 clone support"
42 bool "ASIX AX88796 external 93CX6 eeprom support"
49 tristate "Hydra support"
59 tristate "I-cubed EtherH/ANT EtherM support"
71 If you want to include a driver to support Nubus or LC-PDS
75 tristate "ColdFire NS8390 based Ethernet support"
89 tristate "NE2000/NE1000 support"
99 NE2000 and clone support" below.
105 tristate "PCI NE2000 and clones support (see help)"
[all …]
|
| /linux-4.4.14/fs/fat/ |
| D | Kconfig | 7 to include FAT support. You will then be able to mount partitions or
12 This FAT support is not a file system in itself, it only provides
14 M to at least one of "MSDOS fs support" or "VFAT fs support" in
27 The FAT support will enlarge your kernel by about 37 KB. If unsure,
31 fat. Note that if you compile the FAT support as a module, you
36 tristate "MSDOS fs support"
52 support" below), or you will not be able to see the long filenames
56 answer Y. This will only work if you said Y to "DOS FAT fs support"
61 tristate "VFAT (Windows-95) fs support"
64 This option provides support for normal Windows file systems with
[all …]
|
| /linux-4.4.14/drivers/staging/olpc_dcon/ |
| D | Kconfig | 2 tristate "One Laptop Per Child Display CONtroller support"
8 In order to support very low power operation, the XO laptop uses a
18 bool "OLPC XO-1 DCON support"
22 Enable support for the DCON in XO-1 model laptops. The kernel
28 bool "OLPC XO-1.5 DCON support"
32 Enable support for the DCON in XO-1.5 model laptops. The kernel
|
| /linux-4.4.14/arch/powerpc/platforms/86xx/ |
| D | Kconfig | 21 This option enables support for the MPC8641 HPCN board.
27 This option enables support for the WRS SBC8641D board.
34 This option enables support for the MPC8610 HPCD board.
43 This option enables support for the GE PPC9A.
52 This option enables support for the GE SBC310.
62 This option enables support for the GE SBC610.
|
| /linux-4.4.14/Documentation/filesystems/cifs/ |
| D | TODO | 17 b) improved sparse file support
22 d) quota support (needs minor kernel change since quota calls
25 e) improve support for very old servers (OS/2 and Win9x for example)
26 Including support for changing the time remotely (utimes command).
37 h) Add support for storing symlink info to Windows servers
40 i) Finish inotify support so kde and gnome file list windows
42 vfs change to support removing D_NOTIFY on a file.
47 k) implement support for security and trusted categories of xattrs
48 (requires minor protocol extension) to enable better support for SELINUX
64 p) Add support for new vfs entry point for fallocate
[all …]
|
| /linux-4.4.14/arch/um/ |
| D | Kconfig.char | 22 bool "null channel support"
24 This option enables support for attaching UML consoles and serial
29 bool "port channel support"
31 This option enables support for attaching UML consoles and serial
39 bool "pty channel support"
41 This option enables support for attaching UML consoles and serial
49 bool "tty channel support"
51 This option enables support for attaching UML consoles and serial
58 bool "xterm channel support"
60 This option enables support for attaching UML consoles and serial
[all …]
|
| /linux-4.4.14/arch/arm/mach-bcm/ |
| D | Kconfig | 4 This enables support for Broadcom ARM based SoC chips
23 This enables support for systems based on Broadcom IPROC architected SoCs.
33 Enable support for the Cygnus family,
82 This enables support for systems based on Broadcom mobile SoCs.
89 Enable support for the BCM281XX family, which includes
98 Enable support for the BCM21664 family, which includes
102 bool "Broadcom mobile SoC level 2 cache support"
118 SMP support for the BCM281XX and BCM21664 SoC families.
119 Provided as an option so SMP support for SoCs of this type
134 This enables support for the Broadcom BCM2835 SoC. This SoC is
[all …]
|
| /linux-4.4.14/drivers/infiniband/hw/qib/ |
| D | Kconfig | 2 tristate "Intel PCIe HCA support"
6 channel adapters. This driver does not support the Intel
10 bool "QIB DCA support"
14 Setting this enables DCA support on some Intel chip sets
|
| /linux-4.4.14/sound/soc/intel/ |
| D | Kconfig | 8 This adds support for ASoC machine driver for Intel(R) MID Medfield platform
44 tristate "ASoC Audio DSP support for Intel Haswell Lynxpoint"
51 This adds support for the Lynxpoint Audio DSP on Intel(R) Haswell
79 tristate "ASoC Audio DSP support for Intel Broadwell Wildcatpoint"
87 This adds support for the Wilcatpoint Audio DSP on Intel(R) Broadwell
99 This adds support for ASoC machine driver for Intel(R) MID Baytrail platform
111 This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell
123 This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell
135 This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell
136 platforms with MAX98090 audio codec it also can support TI jack chip as aux device.
[all …]
|
| /linux-4.4.14/block/ |
| D | Kconfig | 8 Provide block layer support for the kernel.
10 Disable this option to remove the block layer support from the
33 This option is required to support the full capacity of large
37 This option also enables support for single files larger than
41 order to support filesystems that have the huge_file feature
51 bool "Block layer SG support v4"
54 Saying Y here will enable generic SG (SCSI generic) v4 support
69 bool "Block layer SG support v4 helper lib"
79 bool "Block layer data integrity support"
92 bool "Block layer bio throttling support"
[all …]
|
| /linux-4.4.14/Documentation/hwmon/ |
| D | k10temp | 21 http://support.amd.com/us/Processor_TechDocs/31116.pdf
23 http://support.amd.com/us/Processor_TechDocs/41256.pdf
25 http://support.amd.com/us/Processor_TechDocs/41131.pdf
27 http://support.amd.com/us/Processor_TechDocs/43170.pdf
29 http://support.amd.com/us/Processor_TechDocs/41322.pdf
31 http://support.amd.com/us/Processor_TechDocs/41788.pdf
33 http://support.amd.com/us/Processor_TechDocs/44739.pdf
35 http://support.amd.com/us/Processor_TechDocs/47534.pdf
37 http://support.amd.com/us/Processor_TechDocs/43373.pdf
39 http://support.amd.com/us/Processor_TechDocs/43374.pdf
[all …]
|
| /linux-4.4.14/drivers/net/wireless/cw1200/ |
| D | Kconfig | 2 tristate "CW1200 WLAN support"
7 specific bus support.
15 Enable support for the CW1200 connected via an SDIO bus.
18 support different CW1200 SDIO designs you will need to override
26 Enables support for the CW1200 connected via a SPI bus. You will
|
| /linux-4.4.14/arch/powerpc/platforms/512x/ |
| D | Kconfig | 17 Enable support for Freescale MPC512x LocalPlus Bus FIFO (SCLPC).
24 This option enables support for the MPC5121E ADS board.
27 bool "Generic support for simple MPC512x based boards"
31 This option enables support for simple MPC512x based boards
42 This option enables support for the PDM360NG board.
|
| /linux-4.4.14/sound/soc/adi/ |
| D | Kconfig | 2 tristate "Audio support for Analog Devices reference designs"
5 Audio support for various reference designs by Analog Devices.
8 tristate "AXI-I2S support"
16 tristate "AXI-SPDIF support"
|
| /linux-4.4.14/arch/blackfin/mach-bf561/boards/ |
| D | Kconfig | 10 BF561-EZKIT-LITE board support.
15 BF561-TEPLA board support.
20 CM-BF561 support for EVAL- and DEV-Board.
25 BF561-ACVILON System On Module support (SO-DIMM 144).
|
| /linux-4.4.14/drivers/nfc/ |
| D | Kconfig | 13 This driver provides support for NFC NXP PN533 devices.
15 Say Y here to compile support for PN533 devices into the
26 Say Y here to compile support for Texas Instrument's NFC WiLink driver
37 Say Y here to compile support for TRF7970a into the kernel or
42 tristate "MEI bus NFC device support"
45 This adds support to use an mei bus nfc device. Select this if you
62 tristate "Sony NFC Port-100 Series USB device support"
66 This adds support for Sony Port-100 chip based USB devices such as the
|
| /linux-4.4.14/fs/quota/ |
| D | Kconfig | 6 bool "Quota support"
14 Ext3, ext4 and reiserfs also support journaled quotas for which
18 with the quota tools. Probably the quota support is only useful for
47 # Generic support for tree structured quota files. Selected when needed.
52 tristate "Old quota format support"
60 tristate "Quota format vfsv0 and vfsv1 support"
64 This config option enables kernel support for vfsv0 and vfsv1 quota
65 formats. Both these formats support 32-bit UIDs/GIDs and vfsv1 format
|
| /linux-4.4.14/arch/sh/ |
| D | Kconfig.cpu | 21 prompt "FPU support"
24 Selecting this option will enable support for SH processors that
35 prompt "FPU emulation support"
38 Selecting this option will enable support for software FPU emulation.
44 prompt "DSP support"
47 Selecting this option will enable support for SH processors that
54 prompt "ADC support"
73 This enables support for a speculative instruction fetch for
|
| /linux-4.4.14/drivers/sbus/char/ |
| D | Kconfig | 5 tristate "/dev/openprom device support"
17 tristate "OBP Flash Device support"
24 tristate "Tadpole TS102 Microcontroller support"
26 Say Y here to directly support the TS102 Microcontroller interface
47 smartcard reader, if present. Say Y to enable support for these.
50 tristate "SUNW, envctrl support"
53 Kernel support for temperature and fan monitoring on Sun SME
60 tristate "7-Segment Display support"
|
| /linux-4.4.14/drivers/remoteproc/ |
| D | Kconfig | 13 tristate "OMAP remoteproc support"
22 Say y here to support OMAP's remote processors (dual M3
35 tristate "STE-Modem remoteproc support"
40 Say y or m here to support STE-Modem shared memory driver.
45 tristate "AMx3xx Wakeup M3 remoteproc support"
49 Say y here to support Wakeup M3 remote processor on TI AM33xx
58 tristate "DA8xx/OMAP-L13x remoteproc support"
64 Say y here to support DA8xx/OMAP-L13x remote processors via the
|
| /linux-4.4.14/drivers/net/ethernet/sun/ |
| D | Kconfig | 20 tristate "Sun Happy Meal 10/100baseT support"
33 tristate "Sun BigMAC 10/100baseT support"
44 tristate "Sun QuadEthernet support"
56 tristate "Sun GEM support"
65 tristate "Sun Cassini support"
73 tristate "Sun Virtual Network support"
79 tristate "Sun Neptune 10Gbit Ethernet support"
83 This enables support for cards based upon Sun's
|
| /linux-4.4.14/arch/arm/mach-ks8695/ |
| D | Kconfig | 27 Say 'Y' here if you want your kernel to support the
34 Say 'Y' here if you want your kernel to support the
41 Say 'Y' here if you want your kernel to support the
49 Say 'Y' here if you want your kernel to support the OpenGear
57 Say 'Y' here if you want your kernel to support the OpenGear
65 Say 'Y' here if you want your kernel to support the OpenGear
73 Say 'Y' here if you want your kernel to support the OpenGear
81 Say 'Y' here if you want your kernel to support the OpenGear
|
| /linux-4.4.14/drivers/input/gameport/ |
| D | Kconfig | 5 tristate "Gameport support"
7 Gameport support is for the standard 15-pin PC gameport. If you
14 support is provided by the sound drivers, so you won't need any
25 tristate "Classic ISA and PnP gameport support"
35 tristate "PDPI Lightning 4 gamecard support"
43 tristate "SB Live and Audigy gameport support"
53 tristate "ForteMedia FM801 gameport support"
|
| /linux-4.4.14/drivers/pci/pcie/ |
| D | Kconfig | 5 bool "PCI Express Port Bus support"
8 This automatically enables PCI Express Port Bus support. Users can
9 choose Native Hot-Plug support, Advanced Error Reporting support,
10 Power Management Event support and Virtual Channel support to run
52 This enables PCI Express ASPM debug support. It will add per-device
|
| /linux-4.4.14/drivers/media/pci/saa7134/ |
| D | Kconfig | 2 tristate "Philips SAA7134 support"
18 tristate "Philips SAA7134 DMA audio support"
29 bool "Philips SAA7134 Remote Controller support"
35 Enables Remote Controller support on saa7134 driver.
61 This adds support for DVB cards based on the
68 tristate "go7007 support for saa7134 based TV cards"
72 Enables saa7134 driver support for boards with go7007
|
| /linux-4.4.14/drivers/gpu/drm/tegra/ |
| D | Kconfig | 20 bool "Enable legacy fbdev support"
27 Choose this option if you have a need for the legacy fbdev support.
28 Note that this support also provides the Linux console on top of
32 bool "NVIDIA Tegra DRM debug support"
34 Say yes here to enable debugging support.
|
| /linux-4.4.14/drivers/staging/iio/addac/ |
| D | Kconfig | 10 Say yes here to build support for Analog Devices ADT7316, ADT7317, ADT7318
17 tristate "support SPI bus connection"
21 Say yes here to build SPI bus support for Analog Devices ADT7316/7/8
28 tristate "support I2C bus connection"
31 Say yes here to build I2C bus support for Analog Devices ADT7316/7/8
|
| /linux-4.4.14/drivers/input/touchscreen/ |
| D | Kconfig | 23 support for the built-in touchscreen.
65 Say Y here if you want to support a touchscreen interface using
74 tristate "support I2C bus connection"
83 tristate "support SPI bus connection"
183 tristate "support I2C bus connection"
192 tristate "support SPI bus connection"
213 tristate "support I2C bus connection"
222 tristate "support SPI bus connection"
231 tristate "Touchscreen support for Dialog Semiconductor DA9034"
235 Say Y here to enable the support for the touchscreen found
[all …]
|
| /linux-4.4.14/fs/cifs/ |
| D | Kconfig | 2 tristate "CIFS support (advanced network filesystem, SMBFS successor)"
21 server support for Linux and many other operating systems). Limited
22 support for OS/2 and Windows ME and similar servers is provided as
25 The module also provides optional support for the followon
32 support for DFS (hierarchical name space), secure per-user
64 (since 1997) support stronger NTLM (and even NTLMv2 and Kerberos)
75 network) you probably want to say N. Even if this support
80 option on the mount command. This support is disabled by
120 support for POSIX ACLs (getfacl and setfacl) to servers
122 CIFS POSIX ACL support. If unsure, say N.
[all …]
|
| /linux-4.4.14/drivers/net/wireless/ |
| D | Kconfig | 21 tristate "Aviator/Raytheon 2.4GHz wireless support"
36 tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware"
46 Debugging support.
62 This is the standard Linux driver to support Cisco/Aironet ISA and
68 This driver support both the standard Linux Wireless Extensions
75 tristate "Atmel at76c50x chipset 802.11b support"
96 Enable support for PCI and mini-PCI cards containing the
106 Enable support for PCMCIA cards containing the
114 Enable support for USB Wireless devices using Atmel at76c503,
126 This is the standard Linux driver to support Cisco/Aironet PCMCIA
[all …]
|
| /linux-4.4.14/drivers/video/fbdev/exynos/ |
| D | Kconfig | 6 bool "Exynos Video driver support"
9 This enables support for EXYNOS Video device.
18 bool "EXYNOS MIPI DSI driver support."
21 This enables support for MIPI-DSI device.
|
| /linux-4.4.14/drivers/iio/dac/ |
| D | Kconfig | 12 Say yes here to build support for Analog Devices AD5024, AD5025, AD5044,
23 Say yes here to build support for Analog Devices AD5360, AD5361,
36 Say yes here to build support for Analog Devices AD5380, AD5381,
47 Say yes here to build support for Analog Devices AD5421 loop-powered
57 Say yes here to build support for Analog Devices AD5300, AD5301, AD5310,
69 Say yes here to build support for Analog Devices AD5415, AD5426, AD5429,
79 Say yes here to build support for Analog Devices AD5504, AD5501,
89 Say yes here to build support for Analog Devices AD5624R, AD5644R and
96 Say yes here to build support for Analog Devices AD5686R, AD5685R,
107 Say yes here to build support for Analog Devices AD5755, AD5755-1,
[all …]
|
| /linux-4.4.14/drivers/sh/intc/ |
| D | Kconfig | 10 bool "Userspace interrupt masking support"
13 This enables support for hardware-assisted userspace hardirq
16 SH-4A and newer interrupt blocks all support a special shadowed
24 bool "Hardware IRQ balancing support"
27 This enables support for IRQ auto-distribution mode on SH-X3
|
| /linux-4.4.14/net/tipc/ |
| D | Kconfig | 16 This protocol support is also available as a module ( = code which
24 bool "InfiniBand media type support"
27 Saying Y here will enable support for running TIPC on
30 bool "IP/UDP media type support"
34 Saying Y here will enable support for running TIPC over IP/UDP
|
| /linux-4.4.14/drivers/pinctrl/vt8500/ |
| D | Kconfig | 17 Say yes here to support the gpio/pin control module on
25 Say yes here to support the gpio/pin control module on
33 Say yes here to support the gpio/pin control module on
41 Say yes here to support the gpio/pin control module on
49 Say yes here to support the gpio/pin control module on
|
| /linux-4.4.14/drivers/s390/char/ |
| D | Kconfig | 9 Include support for IBM 3270 terminals.
16 Include support for using an IBM 3270 terminal as a Linux tty.
23 Include support for fullscreen applications on an IBM 3270 terminal.
30 Include support for using an IBM 3270 terminal as a Linux system
31 console. Available only if 3270 support is compiled in statically.
38 Include support for IBM 3215 line-mode terminals.
45 Include support for using an IBM 3215 line-mode terminal as a
56 Include support for IBM SCLP line-mode terminals.
63 Include support for using an IBM HWC line-mode terminal as the Linux
71 Include support for an IBM SCLP VT220-compatible terminal.
[all …]
|
| /linux-4.4.14/sound/soc/kirkwood/ |
| D | Kconfig | 5 Say Y or M if you want to add support for codecs attached to
7 audio interfaces to support below.
10 tristate "SoC Audio support for Armada 370 DB"
15 Say Y if you want to add support for SoC audio on
|
| /linux-4.4.14/drivers/scsi/csiostor/ |
| D | Kconfig | 2 tristate "Chelsio Communications FCoE support"
13 For customer support, please visit our customer support page at
14 <http://www.chelsio.com/support.html>.
|
| /linux-4.4.14/net/decnet/ |
| D | Kconfig | 12 To find some tools to use with the kernel layer support, please
19 Be sure to say Y to "/proc file system support" and "Sysctl support"
20 below when using DECnet, since you will need sysctl support to aid
28 bool "DECnet: router support"
32 Add support for turning your DECnet Endnode into a level 1 or 2
|
| /linux-4.4.14/fs/ubifs/ |
| D | Kconfig | 2 tristate "UBIFS file system support"
25 bool "LZO compression support" if UBIFS_FS_ADVANCED_COMPR
33 bool "ZLIB compression support" if UBIFS_FS_ADVANCED_COMPR
40 bool "Access time support" if UBIFS_FS
44 Originally UBIFS did not support atime, because it looked like a bad idea due
45 increased flash wear. This option adds atime support and it is disabled by default
|
| /linux-4.4.14/arch/x86/kvm/ |
| D | Kconfig | 21 tristate "Kernel-based Virtual Machine (KVM) support"
62 tristate "KVM for Intel processors support"
67 Provides support for KVM on Intel processors equipped with the VT
74 tristate "KVM for AMD processors support"
77 Provides support for KVM on AMD processors equipped with the AMD-V
91 bool "KVM legacy PCI device assignment support (DEPRECATED)"
95 Provide support for legacy PCI device assignment through KVM. The
97 framework through VFIO, which supersedes this support and provides
|