| /linux-4.4.14/Documentation/devicetree/bindings/net/can/ |
| D | sun4i_can.txt | 15 can0_pins_a: can0@0 {
22 can0: can@01c2bc00 {
32 can0: can@01c2bc00 {
|
| D | rcar_can.txt | 27 can0: can@e6e80000 {
39 &can0 {
|
| D | atmel-can.txt | 10 can0: can@f000c000 {
|
| D | microchip,mcp251x.txt | 17 can0: can@1 {
|
| /linux-4.4.14/Documentation/ABI/testing/ |
| D | sysfs-platform-at91 | 22 echo 0x7ff > /sys/class/net/can0/mb0_id
25 echo 0x9fffffff > /sys/class/net/can0/mb0_id
|
| /linux-4.4.14/arch/arm/boot/dts/ |
| D | at91sam9x5_can.dtsi | 30 can0: can@f8000000 { label
53 can0 {
|
| D | sama5d3_can.dtsi | 17 can0 {
51 can0: can@f000c000 { label
|
| D | r8a7791-henninger.dts | 145 can0_pins: can0 {
147 renesas,function = "can0";
316 &can0 {
|
| D | spear320-evb.dts | 66 can0 {
68 st,function = "can0";
|
| D | zynq-zc702.dts | 81 &can0 {
187 pinctrl_can0_default: can0-default {
189 function = "can0";
|
| D | sama5d36ek.dts | 28 can0: can@f000c000 { label
|
| D | sama5d35ek.dts | 23 can0: can@f000c000 { label
|
| D | sama5d34ek.dts | 28 can0: can@f000c000 { label
|
| D | spear320-hmi.dts | 70 can0 {
72 st,function = "can0";
|
| D | zynq-7000.dtsi | 75 can0: can@e0008000 { label
251 "fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1",
|
| D | imx28-tx28.dts | 23 can0 = &can0;
264 &can0 {
|
| D | vfxxx.dtsi | 17 can0 = &can0;
95 can0: flexcan@40020000 { label
|
| D | tegra30-colibri-eval-v3.dts | 72 can0: can@0 { label
|
| D | imx28-apf28dev.dts | 114 can0: can@80032000 { label
|
| D | imx28-m28evk.dts | 112 can0: can@80032000 { label
|
| D | imx51-eukrea-mbimxsd51-baseboard.dts | 121 can0: can@0 { label
|
| D | at91-sama5d3_xplained.dts | 64 can0: can@f000c000 { label
|
| D | imx28-evk.dts | 155 can0: can@80032000 { label
|
| D | imx28.dtsi | 782 can0_pins_a: can0@0 {
961 can0: can@80032000 { label
|
| D | imx53-tx53.dtsi | 23 can0 = &can2; /* Make the can interface indices consistent with TX28/TX48 modules */
|
| D | lpc18xx.dtsi | 422 can0: can@400e2000 { label
|
| D | imx6qdl-tx6.dtsi | 19 can0 = &can2;
|
| D | socfpga.dtsi | 96 can0: can@ffc00000 { label
|
| D | imx6qdl.dtsi | 21 can0 = &can1;
|
| D | imx6sx.dtsi | 18 can0 = &flexcan1;
|
| D | r8a7791.dtsi | 941 can0: can@e6e80000 { label
|
| D | r8a7790.dtsi | 909 can0: can@e6e80000 { label
|
| /linux-4.4.14/Documentation/devicetree/bindings/reset/ |
| D | zynq-reset.txt | 45 256: can0 reset
47 258: can0 ref reset
|
| /linux-4.4.14/arch/powerpc/boot/dts/fsl/ |
| D | p1010si-pre.dtsi | 53 can0 = &can0;
|
| D | p1010si-post.dtsi | 136 can0: can@1c000 { label
|
| /linux-4.4.14/Documentation/devicetree/bindings/clock/ |
| D | zynq-7000.txt | 60 19: can0
99 "fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1",
|
| D | imx28-clock.txt | 72 can0 58
|
| /linux-4.4.14/drivers/clk/mxs/ |
| D | clk-imx28.c | 147 fec, can0, can1, usb0, usb1, usb0_phy, usb1_phy, enet_out, enumerator
231 clks[can0] = mxs_clk_gate("can0", "ref_xtal", FLEXCAN, 30); in mx28_clocks_init()
|
| /linux-4.4.14/arch/arm64/boot/dts/xilinx/ |
| D | zynqmp-ep108.dts | 35 &can0 {
|
| D | zynqmp.dtsi | 99 can0: can@ff060000 { label
|
| /linux-4.4.14/Documentation/devicetree/bindings/pinctrl/ |
| D | pinctrl_spear.txt | 140 "can0", "can1", "pwm0_1", "pwm2", "pwm3", "ssp1", "ssp2", "mii2",
149 "i2c_4_5", "i2c_6_7", "can0", "can1", "pci", "sata", "ssp1", "gpt64"
|
| D | brcm,cygnus-pinmux.txt | 118 "can0": "can0_grp"
|
| D | xlnx,zynq-pinctrl.txt | 65 smc0_nor, smc0_nor_cs1, smc0_nor_addr25, smc0_nand, can0, can1, uart0, uart1,
|
| /linux-4.4.14/drivers/clk/zynq/ |
| D | clkc.c | 64 lqspi, smc, pcap, gem0, gem1, fclk0, fclk1, fclk2, fclk3, can0, can1, enumerator
481 clks[can0] = clk_register_mux(NULL, clk_output_name[can0], in zynq_clk_setup()
|
| /linux-4.4.14/drivers/pinctrl/bcm/ |
| D | pinctrl-cygnus-mux.c | 555 CYGNUS_PIN_GROUP(can0, 0x18, 8, 1),
691 CYGNUS_PIN_FUNCTION(can0),
|
| /linux-4.4.14/Documentation/networking/ |
| D | can.txt | 306 strcpy(ifr.ifr_name, "can0" );
367 strcpy(ifr.ifr_name, "can0");
678 strcpy(ifr.ifr_name, "can0");
975 - the CAN bus this CAN ID is transmitted on (e.g. can0)
1019 $ ip link set can0 type can help
1052 $ ip -details -statistics link show can0
1053 2: can0: <NOARP,UP,LOWER_UP,ECHO> mtu 16 qdisc pfifo_fast state UP qlen 10
1137 $ ip -details link show can0
1220 $ ip link set can0 up type can bitrate 500000 sample-point 0.75 \
1222 $ ip -details link show can0
[all …]
|
| /linux-4.4.14/arch/powerpc/boot/dts/ |
| D | tqm8560.dts | 357 can0@2,0 {
|
| /linux-4.4.14/drivers/pinctrl/ |
| D | pinctrl-zynq.c | 818 DEFINE_ZYNQ_PINMUX_FUNCTION(can0, 0x10),
|
| /linux-4.4.14/drivers/pinctrl/sh-pfc/ |
| D | pfc-r8a7778.c | 2084 SH_PFC_FUNCTION(can0),
|
| D | pfc-r8a7791.c | 5084 SH_PFC_FUNCTION(can0),
|
| /linux-4.4.14/Documentation/ |
| D | devices.txt | 1652 0 = /dev/can0 First CAN-Bus controller
|