Home
last modified time | relevance | path

Searched refs:between (Results 1 – 200 of 998) sorted by relevance

12345

/linux-4.4.14/Documentation/ABI/testing/
Dsysfs-class-backlight-driver-adp887012 on this <backlight>. Values are between 0 and 127. This file
26 on this <backlight>. Values are between 0 and 127, typically
38 is enabled). Returns integer between 0 (dark) and
47 integer between 1..5 (1 = daylight, 2 = bright, ..., 5 = dark).
48 Writing a value between 1..5 forces the backlight controller
Dsysfs-bus-iio-adc-hi843522 The low voltage threshold range is between 2..21V.
23 Hysteresis between low and high thresholds can not be lower then 2 and
39 The high voltage threshold range is between 3..22V.
40 Hysteresis between low and high thresholds can not be lower then 2 and
Dsysfs-bus-usb-devices-usbsevseg25 hex: each character is between 0-15
26 ascii: each character is between '0'-'9' and 'A'-'F'.
Dsysfs-bus-usb-lvstest17 Validation device is connected. Timeout value must be between 0
25 Validation device is connected. Timeout value must be between 0
Dsysfs-class-lcd15 Current contrast of this LCD device. Value is between 0 and
Dsysfs-class-mei29 Also number of registers varies between 1 and 6
Dsysfs-class-extcon70 "x" (integer between 0 and 31) of an extcon device.
77 state of cable "x" (integer between 0 and 31) of an extcon
Dsysfs-devices8 and between different kernel versions, the layout of the
/linux-4.4.14/Documentation/devicetree/bindings/power_supply/
Dti,bq24735.txt14 must be between 128mA and 8.128A with a 64mA step resolution. The POR value
18 must be between 1.024V and 19.2V with a 16mV step resolution. The POR value
22 value must be between 128mA and 8.064A with a 128mA step resolution. The
Dmsm-poweroff.txt5 between poweroff and restart is determined by unique power manager IC
/linux-4.4.14/Documentation/devicetree/bindings/
Dgraph.txt7 control flow to devices, but there can be more complex connections between
10 There already is a simple directed graph between devices tree nodes using
23 Here the ports describe data interfaces, and the links between them are
87 Links between endpoints
94 'remote-endpoint' phandles pointing at each other form a link between the
Dipmi.txt12 - reg-spacing - The number of bytes between register starts. Defaults to 1
/linux-4.4.14/drivers/mailbox/
DKconfig4 Mailbox is a framework to control hardware communication between
24 send short messages between Highbank's A9 cores and the EnergyCore
52 between the OS and a platform such as the BMC. This medium
63 to send message between processors. Say Y here if you want to use the
/linux-4.4.14/Documentation/devicetree/bindings/mips/cavium/
Dciu2.txt13 the CIU and may have a value between 0 and 63. The second cell is
14 the bit within the bank and may also have a value between 0 and 63.
Ddma-engine.txt3 The Octeon DMA Engine transfers between the Boot Bus and main memory.
Dciu.txt14 within the bank and may have a value between 0 and 63.
/linux-4.4.14/Documentation/devicetree/bindings/memory-controllers/
Dti-aemif.txt96 Time between the end of one asynchronous memory
99 between a read followed by read or a write
103 Time between the beginning of a memory cycle
108 Time between the activation and deactivation of
113 Time between the deactivation of the read
120 Time between the beginning of a memory cycle
125 Time between the activation and deactivation of
130 Time between the deactivation of the write
Dmvebu-devbus.txt57 - devbus,acc-next-ps: Defines the time delay between the cycle that
62 - devbus,rd-setup-ps: Defines the time delay between DEV_CSn assertion to
71 - devbus,rd-hold-ps: Defines the time between the last data sample to the
96 inactive (high) between data beats of a burst write.
Dath79-ddr-controller.txt4 to flush the FIFO between various devices and the DDR. This is mainly used
/linux-4.4.14/Documentation/devicetree/bindings/powerpc/4xx/
Dhsta.txt6 between the plb4 and plb6 system buses to provide high speed data
7 transfer between memory and system peripherals as well as support for
/linux-4.4.14/net/nfc/nci/
DKconfig6 NCI (NFC Controller Interface) is a communication protocol between
18 NCI (NFC Controller Interface) is a communication protocol between
/linux-4.4.14/drivers/android/
DKconfig15 Binder is used in Android for both communication between processes,
20 between said processes.
/linux-4.4.14/arch/mips/kernel/
Dentry.S49 # between sampling and return
87 # signals dont change between
143 # signals dont change between
/linux-4.4.14/Documentation/devicetree/bindings/sound/
Dda7219.txt56 - dlg,a-d-btn-thr : Impedance threshold between buttons A and D
58 - dlg,d-b-btn-thr : Impedance threshold between buttons D and B
60 - dlg,b-c-btn-thr : Impedance threshold between buttons B and C
62 - dlg,c-mic-btn-thr : Impedance threshold between button C and Mic
Dsimple-card.txt14 - simple-audio-card,routing : A list of the connections between audio components.
18 - simple-audio-card,mclk-fs : Multiplication factor between stream rate and codec
59 - mclk-fs : Multiplication factor between stream
Datmel-at91sam9g20ek-wm8731-audio.txt6 - atmel,audio-routing: A list of the connections between audio components.
Datmel-sam9x5-wm8731-audio.txt8 - atmel,audio-routing: A list of the connections between audio components.
Dsamsung,odroidx2-max98090.txt9 - samsung,audio-routing : a list of the connections between audio
Dnvidia,tegra-audio-wm9712.txt12 - nvidia,audio-routing : A list of the connections between audio components.
Drockchip-i2s.txt4 audio data transfer between devices in the system.
Datmel-wm8904.txt6 - atmel,audio-routing: A list of the connections between audio components.
Dimx-audio-wm8962.txt13 - audio-routing : A list of the connections between audio components.
Domap-twl4030.txt12 - ti,audio-routing: List of connections between audio components.
Dnvidia,tegra-audio-wm8753.txt12 - nvidia,audio-routing : A list of the connections between audio components.
/linux-4.4.14/Documentation/devicetree/bindings/mailbox/
Dsti-mailbox.txt4 are passed between Application and Remote processors using shared memory.
37 - reg : Shared (between Application and Remote) memory address
Domap-mailbox.txt4 The OMAP mailbox hardware facilitates communication between different processors
17 and tx interrupt source per h/w fifo. Communication between different processors
24 and interrupt lines between different instances. The interrupt lines can also be
56 used for the communication between the host processor and a remote processor.
/linux-4.4.14/Documentation/devicetree/bindings/mfd/
Dcros-ec.txt23 clock rate. This property specifies the delay, in usecs, between the
27 between transactions is not long enough the EC may not be able to respond
29 specifies the delay, in usecs, introduced between transactions to account
/linux-4.4.14/Documentation/devicetree/bindings/regulator/
Dltc3589.txt21 0.3625 V to 0.75 V in 12.5 mV steps. The output voltage thus ranges between
25 regulator can output between 1.8 V and 3.3 V on LTC3589 and between 1.2 V
/linux-4.4.14/Documentation/devicetree/bindings/serial/
Drs485.txt10 * a is the delay between rts signal and beginning of data sent in milliseconds.
12 * b is the delay between end of data sent and rts signal in milliseconds
/linux-4.4.14/Documentation/devicetree/bindings/net/
Dapm-xgene-enet.txt24 - phy-connection-type: Interface type between ethernet device and PHY device
41 Valid values are between 0 to 7, that maps to
45 Valid values are between 0 to 7, that maps to
/linux-4.4.14/Documentation/
Dcpu-load.txt28 switched between various states multiple times between two timer
38 time line between two timer interrupts
Dlocal_ops.txt43 not have a different behavior between SMP and UP, including asm-generic/local.h
61 different CPU between getting the per-cpu variable and doing the
113 between CPUs, explicit smp_wmb() and smp_rmb() memory barriers must be used
116 be a smp_wmb() between the buffer write and the counter increment and also a
117 smp_rmb() between the counter read and the buffer read.
Dsgi-ioc4.txt11 themselves) present in IOC4 are mixed-purpose between these several
23 the PCI resources that are shared between the IOC4 functions.
Dsmsc_ece1099.txt35 interface. SMBus is a serial communication protocol between
50 between a Master device and a Companion device. The Master
Dhighuid.txt4 when communicating between user and kernel space in an ioctl or data
71 communicate between user and kernel)
Dpercpu-rw-semaphore.txt9 is bouncing between L1 caches of the cores, causing performance
Dxillybus.txt80 elementary data transport between an FPGA and the host, providing pipe-like
150 between write() calls, in particular when the process loses the CPU.
160 In summary, for synchronous pipes, data between the host and FPGA is
208 * channelnum: The pipe's identification number in communication between the
261 a data channel between the FPGA and the host. The distinction between channels
291 balances between bus bandwidth efficiency (preventing a lot of partially
305 to lay around in the DMA buffers between read() and write() anyhow.
/linux-4.4.14/fs/gfs2/
DKconfig11 that is shared between them (with FC, iSCSI, NBD, etc...). GFS reads
33 interface between GFS2 and the DLM, which is required to use GFS2
/linux-4.4.14/Documentation/i2c/busses/
Di2c-ocores22 distance between registers and the input clock speed.
55 .regstep = 2, /* two bytes between registers */
/linux-4.4.14/Documentation/blockdev/drbd/
Ddata-structure-v9.txt12 drbd_peer_device object sits at each intersection between a drbd_device and a
36 counted. The peer_device objects only serve to establish the links between
/linux-4.4.14/Documentation/devicetree/bindings/staging/iio/adc/
Dmxs-lradc.txt16 - fsl,ave-delay: delay between consecutive samples. Allowed value is
19 - fsl,settling: delay between plate switch to next sample. Allowed value is
/linux-4.4.14/Documentation/usb/
Dmisc_usbsevseg.txt21 hex expects a value between 0-15 per character,
22 ascii expects a value between '0'-'9' and 'A'-'F'.
/linux-4.4.14/Documentation/hwmon/
Dlm7724 register on the chip, which means that the relative difference between
35 read-only. Setting temp1_crit_hyst writes the difference between
Dgl518sm39 situation. Measurements are guaranteed between -10 degrees and +110
55 measures voltages between 0.000 and 5.865 volt, with a resolution of 0.023
56 volt. The other inputs measure voltages between 0.000 and 4.845 volt, with
Dlm7825 There is almost no difference between the three supported chips. Functionally,
39 between -55 and +125 degrees, with a resolution of 1 degree.
52 inputs can measure voltages between 0 and 4.08 volts, with a resolution
Dadc128d81824 Measurements are guaranteed between -55 and +125 degrees. The temperature
32 inputs can measure voltages between 0 and 2.55 volts, with a resolution
Df71882fg94 to the border between the highest and one but highest temperature zones, and
107 between 0-100% of fan#_full_speed. It is assumed that if the BIOS programs
112 Switching between these modes requires re-initializing a whole bunch of
134 The fan speed is regulated to keep the temp the fan is mapped to between
Demc140345 difference between the limit and its hysteresis is always the same for
56 are read-only. Setting temp1_crit_hyst writes the difference between
Dadt746263 The ADT7462 will scale the pwm between the lower and higher pwm speed when
64 the temperature is between the two temperature boundaries. PWM values range
Dadt747062 The ADT7470 will scale the pwm between the lower and higher pwm speed when
63 the temperature is between the two temperature boundaries. PWM values range
Dlm8037 is unclear about this). Measurements are guaranteed between -55 and
52 inputs can measure voltages between 0 and 2.55 volts, with a resolution
Dtmp10222 The TMP102 has a programmable update rate that can select between 8, 4, 1, and
Dhih613018 The difference between the two devices is that the HIH-6131 has a condensation
Dg76250 integer value between 0 and 255. 0 stops the fan, 255 makes
55 the fan speed is programmed by setting a value between 0 and 255 via 'pwm1'
Dit87184 voltage inputs can measure voltages between 0 and 4.08 volts, with a resolution
185 of 0.016 volt. IT8603E, IT8721F/IT8758E and IT8728F can measure between 0 and
186 3.06 volts, with a resolution of 0.012 volt. IT8732F can measure between 0 and
250 prevent fast switching between fan on and off.
254 between trip point N and trip point N+1 then the PWM output value is
/linux-4.4.14/Documentation/input/
Dmulti-touch-protocol.txt46 The main difference between the stateless type A protocol and the stateful
100 raw data for all present contacts are sent between every synchronization
182 indicate the distance between the contact and the surface.
261 The distance, in surface units, between the contact and the surface. Zero
282 support is possible if the device can distinguish between the two axis, but
283 not (uniquely) any values in between. In such cases, the range of
297 the device cannot distinguish between the intended touch point and the
303 device cannot distinguish between the intended touch point and the tool
314 between different tool types, such as a finger or a pen. In such cases, the
356 the device can distinguish between a finger along the Y axis (0) and a
[all …]
/linux-4.4.14/Documentation/devicetree/bindings/phy/
Dapm-xgene-phy.txt30 between 0 to 31 in unit of dB. Default is 3.
33 Range is between 0 to 199500 in unit of uV.
45 between 0 to 0x1f in unit of 18.2mV. Default is 0xf.
Dphy-bindings.txt30 In order to differentiate between these 2 PHYs, an additional specifier should be
70 "1" to differentiate between the two PHYs.
/linux-4.4.14/Documentation/devicetree/bindings/spi/
Dspi-fsl-dspi.txt20 - fsl,spi-cs-sck-delay: a delay in nanoseconds between activating chip
22 - fsl,spi-sck-cs-delay: a delay in nanoseconds between stopping the clock
/linux-4.4.14/Documentation/devicetree/bindings/media/xilinx/
Dvideo.txt9 tree using bindings documented in this directory. Connections between the IP
21 AXI bus between video IP cores, using its VF code as defined in "AXI4-Stream
Dxlnx,video.txt11 mappings between DMAs and the video IP cores.
/linux-4.4.14/Documentation/devicetree/bindings/mmc/
Dti-omap.txt6 This file documents differences between the core properties described
33 This file documents differences between the core properties described
Dsdhci-dove.txt3 This file documents differences between the core properties in mmc.txt
Dsdhci-spear.txt3 This file documents differences between the core properties in mmc.txt
Dbrcm,bcm2835-sdhci.txt3 This file documents differences between the core properties described
Dorion-sdio.txt3 This file documents differences between the core properties in mmc.txt
Dsdhci-sirf.txt3 This file documents differences between the core properties in mmc.txt
Dbrcm,kona-sdhci.txt3 This file documents differences between the core properties in mmc.txt
Dvt8500-sdmmc.txt3 This file documents differences between the core properties described
Dsdhci-atmel.txt3 This file documents the differences between the core properties in
Dbrcm,sdhci-iproc.txt3 This file documents differences between the core properties described
Dpxa-mmc.txt13 This file documents differences between the core properties in mmc.txt
Dsocfpga-dw-mshc.txt6 differences between the core Synopsys dw mshc controller properties described
Dimg-dw-mshc.txt6 differences between the core Synopsys dw mshc controller properties described
Dmxs-mmc.txt6 This file documents differences between the core properties in mmc.txt
Dsdhci-fujitsu.txt3 This file documents differences between the core properties in mmc.txt
Dmmc-spi-slot.txt3 This file documents differences between the core properties described
Dmmc-pwrseq-simple.txt4 common properties between various SOC designs. It thus enables us to use the
Dsamsung-sdhci.txt4 MMC, SD and eMMC storage mediums. This file documents differences between the
Dti-omap-hsmmc.txt6 This file documents differences between the core properties described
85 dat1. The MMC driver will then toggle between idle and default state during
Drenesas,mmcif.txt3 This file documents differences between the core properties in mmc.txt
Dnvidia,tegra20-sdhci.txt6 This file documents differences between the core properties described
Dmtk-sd.txt6 This file documents differences between the core properties in mmc.txt
/linux-4.4.14/Documentation/ja_JP/
DSubmitChecklist5 If you find any difference between this document and the original file
106 "warning: comparison between signed and unsigned" のようなメッセージは、
/linux-4.4.14/Documentation/scsi/
Dufs.txt84 connection between UFS host and UFS device. UIC consists of
87 * UIC_SAP: To transport UPIU between UFS host and UFS device.
95 UFSHCD is a low level device driver which acts as an interface between
103 and prepares the controller to transfer commands/response between
Ddtc3x80.txt17 internal DMA, between SCSI bus and an on-chip 128-byte buffer. Double
19 between the on-chip buffer and CPU/RAM via memory moves.
Dscsi-parameters.txt58 Should be between 1 and 2^32-1.
62 Should be between 1 and 16384.
Dsym53c500_cs.txt5 (1) extensive kernel changes between 2.4 and 2.6.
/linux-4.4.14/Documentation/misc-devices/
Dlis3lv02d37 By default output values are scaled between -32768 .. 32767. In joystick raw
46 between normal mode and test mode. Chip specifications tell the acceptance
50 measured difference between modes. Axes are not remapped in selftest mode.
69 For better compatibility between the various laptops. The values reported by
Dics932s40121 percent the clock signal is being spread, which should be between 0 and -0.5%.
/linux-4.4.14/Documentation/arm/Samsung/
DBootloader-interface.txt1 Interface between kernel and boot loaders on Exynos boards
7 The document tries to describe currently used interface between Linux kernel
DGPIO.txt26 GPIO numbering is synchronised between the Samsung and gpiolib system.
/linux-4.4.14/arch/arm/boot/dts/
Dimx6q-tx6q-1110.dts31 * a poor man's way to create a 1:1 relationship between
53 * a poor man's way to create a 1:1 relationship between
Dimx6dl-tx6u-811x.dts31 * a poor man's way to create a 1:1 relationship between
53 * a poor man's way to create a 1:1 relationship between
Dkirkwood-db.dtsi11 * This file contains the definitions that are common between the 6281
Domap4-panda-es.dts18 /* Audio routing is differnet between PandaBoard4430 and PandaBoardES */
Dkirkwood-openrd.dtsi10 * This file contains the definitions that are common between the three
Dimx6dl-tx6dl-comtft.dts29 * a poor man's way to create a 1:1 relationship between
/linux-4.4.14/Documentation/devicetree/bindings/bus/
Dti-gpmc.txt64 - gpmc,bus-turnaround-ns: Turn-around time between successive accesses
65 - gpmc,cycle2cycle-delay-ns: Delay between chip-select pulses
74 - gpmc,cycle2cycle-diffcsen: Add "cycle2cycle-delay" between successive
76 - gpmc,cycle2cycle-samecsen: Add "cycle2cycle-delay" between successive
/linux-4.4.14/Documentation/networking/caif/
DLinux-CAIF.txt11 communication between Modem and host. The host processes can open virtual AT
13 The Utility Channels are general purpose pipes between modem and host.
15 ST-Ericsson modems support a number of transports between modem
103 - CFMUX CAIF Mux layer. Handles multiplexing between multiple
/linux-4.4.14/drivers/video/fbdev/omap2/dss/
DKconfig56 DBI is a bus between the host processor and a peripheral,
92 SDI is a high speed one-way display serial bus between the host
101 DSI is a high speed half-duplex serial interface between the host
/linux-4.4.14/tools/perf/Documentation/
Dperf-bench.txt32 (executing 1000000 pipe operations between two tasks)
120 (executing 1000000 pipe operations between two tasks)
127 (executing 1000 pipe operations between two tasks)
Dperf-lock.txt19 between start and end <command>. And this command
/linux-4.4.14/net/l3mdev/
DKconfig9 This module provides glue between core networking code and device
/linux-4.4.14/Documentation/devicetree/bindings/input/
Dqcom,pm8xxx-keypad.txt63 Definition: time in microseconds to pause between successive scans
69 Definition: time in nanoseconds to pause between scans of each row in
Datmel,maxtouch.txt20 Note: the numbering of the GPIOs and the bit they start at varies between
/linux-4.4.14/Documentation/isdn/
DINTERFACE.fax4 Description of the fax-subinterface between linklevel and hardwarelevel of
7 The communication between linklevel (LL) and hardwarelevel (HL) for fax
24 capability-values and the command-codes between LL and HL.
DREADME.sc27 1.2 What is different between this driver and previous drivers?
66 1.2 What is different between this driver and previous drivers?
73 versus between 16K and 64K. New methods for using the shared RAM
189 basic HDLC connection between its two channels. Two network
190 interfaces are created and two routes added between the channels.
214 PPP connection between the two channels. The file is almost
DREADME.fax40 The interface between the link-level-module and the hardware-level driver
/linux-4.4.14/drivers/usb/mon/
DKconfig9 between peripheral-specific drivers and HC drivers will be built.
/linux-4.4.14/Documentation/devicetree/bindings/rng/
Dtimeriomem_rng.txt6 - period : wait time in microseconds to use between samples
/linux-4.4.14/Documentation/devicetree/bindings/arm/
Darm,scpi.txt14 - shmem : List of phandle pointing to the shared memory(SHM) area between the
17 between the processors.
40 These clocks don't provide an entire range of values between the
59 A small area of SRAM is reserved for SCPI communication between application
Dkirkwood.txt14 between the "cpu_clk" and the "ddrclk".
Dvexpress.txt123 between the motherboard and the tile. The first cell defines the Chip
125 All interrupt lines between the motherboard and the tile are active
150 Static Memory Bus between the tile and motherboard. It must define
/linux-4.4.14/Documentation/trace/
Devents-kmem.txt53 impairs performance by disabling interrupts, dirtying cache lines between
84 between allocation and freeing. A number of drain or refill pages that occur
86 refills and drains could imply an imbalance between CPUs where too much work
90 line bounces due to writes between CPUs and worth investigating if pages
/linux-4.4.14/Documentation/video4linux/
Dsoc-camera.txt14 - camera host bus - a connection between a camera host and a camera. Can be
21 The soc-camera subsystem initially provided a unified API between camera host
76 parameters between the host and the sensor. .init_videobuf2 is called by
149 V4L2 distinguishes between pixel formats, as they are stored in memory, and as
155 sample and stored in memory in the little-endian order with no gaps between
DREADME.pvrusb245 The most important shearing layer is between the top 2 layers. A
81 pvrusb2-audio.[ch] - This is glue logic that resides between this
106 pvrusb2-eeprom.[ch] - This is glue logic that resides between this
185 pvrusb2-tuner.[ch] - This is glue logic that resides between this
199 pvrusb2-video-*.[ch] - This is glue logic that resides between this
/linux-4.4.14/drivers/usb/usbip/
Dusbip_protocol.txt30 to transfer the URB traffic between the client and the server. The client may
268 0x30 | | | URB data. For ISO transfers the padding between
315 | | | between each ISO packets is not transmitted.
336 | | | between each ISO packets is not transmitted.
358 | | | between each ISO packets is not transmitted.
/linux-4.4.14/Documentation/cpu-freq/
Dgovernors.txt143 up_threshold: defines what the average CPU usage between the samplings
146 to its default value of '95' it means that between the checking
170 powersave_bias: this parameter takes a value between 0 to 1000. It
181 Processors and above) value between 0 to 100% that tells software how
206 value to anywhere between 0 and 100 where '0' will effectively lock your
213 20% between samples to have the frequency decreased.
261 What's the difference between these two functions? When your governor
Dpcc-cpufreq.txt46 Processor Clocking Control (PCC) is an interface between the platform
48 performance (ie: frequency) between the platform firmware and the OS.
65 between the OS and platform firmware. PCC also implements a "doorbell" that
137 between the limits (1600 MHz, and 2933 MHz) specified in the message.
/linux-4.4.14/net/netlink/
DKconfig9 reduces overhead by avoiding copying data between kernel- and
/linux-4.4.14/fs/fscache/
DKconfig24 between CPUs. On the other hand, the stats are very useful for
41 bouncing between CPUs. On the other hand, the histogram may be
/linux-4.4.14/drivers/misc/vmw_vmci/
DKconfig10 high-speed communication between host and guest in a virtual
/linux-4.4.14/net/switchdev/
DKconfig9 This module provides glue between core networking code and device
/linux-4.4.14/Documentation/devicetree/bindings/iio/adc/
Dnuvoton-nau7802.txt9 configured valid values are between 2400 mV and 4500 mV.
/linux-4.4.14/Documentation/devicetree/bindings/interrupt-controller/
Dsnps,arc700-intc.txt13 between 0 to 31
Dsnps,archs-intc.txt10 between 16 to 256
/linux-4.4.14/virt/kvm/
DKconfig28 # Toggle to switch between direct notification and batch job
/linux-4.4.14/Documentation/devicetree/bindings/net/wireless/
Dqcom,ath10k.txt11 length can vary between hw versions
/linux-4.4.14/Documentation/devicetree/bindings/pinctrl/
Dfsl,imx27-pinctrl.txt12 PIN is an integer between 0 and 0xbf. imx27 has 6 ports with 32 configurable
14 number on the specific port (between 0 and 31).
/linux-4.4.14/Documentation/w1/masters/
Domap-hdq17 communication between the master (HDQ/1-Wire controller) and the slave
24 difference between the HDQ and 1-wire mode is how the slave device responds to
/linux-4.4.14/Documentation/devicetree/bindings/dma/
Drenesas,rcar-dmac.txt5 can be dedicated to specific clients or shared between a large number of
11 number of clients to be served, channels must be shared between multiple DMA
Dmpc512x-dma.txt4 blocks of memory contents between memory and peripherals or
/linux-4.4.14/Documentation/devicetree/bindings/powerpc/fsl/
Draideng.txt17 between child address space and parent address space
37 between child address space and parent address space
Ddma.txt12 - ranges : describes the mapping between the address space of the
82 - ranges : describes the mapping between the address space of the
142 - ranges : describes the mapping between the address space of the
Dccf.txt18 between CCF version 1 and CCF version 2. This compatible
/linux-4.4.14/Documentation/devicetree/bindings/power/
Dda9150-fg.txt7 - dlg,update-interval: Interval time (milliseconds) between battery level checks.
Drockchip-io-domain.txt5 kept in sync between the regulators and the SoC using a special
27 regulator. It changes the regulator between 3.3V and 1.8V at the
/linux-4.4.14/net/iucv/
DKconfig8 communication link between VM guests.
/linux-4.4.14/drivers/spmi/
DKconfig8 serial interface between baseband and application processors
/linux-4.4.14/net/irda/irnet/
DKconfig12 can use it between Linux machine or with W2k.
/linux-4.4.14/drivers/staging/iio/Documentation/
Doverview.txt8 The aim is to fill the gap between the somewhat similar hwmon and
12 devices. In some cases there is considerable overlap between these and
Dsysfs-bus-iio-impedance-analyzer-ad593311 Frequency increment in Hz (step size) between consecutive
/linux-4.4.14/Documentation/device-mapper/
Ddm-log.txt44 The structure used for communication between kernel and userspace are
46 diversity, and 2-way communication nature of the exchanges between
Dthin-provisioning.txt5 between them implement thin-provisioning and snapshots.
10 allows the sharing of data between volumes, thus reducing disk usage.
73 are shared between thin devices (i.e. through snapshots). If you have
103 $data_block_size must be between 128 (64KB) and 2097152 (1GB) and a
191 between the origin and the snapshot. Indeed the snapshot is no
212 (possibly shared between many VMs).
269 Data block size must be between 64KB (128 sectors) and 1GB
/linux-4.4.14/Documentation/devicetree/bindings/powerpc/nintendo/
Dwii.txt25 Represents the interface between the graphics processor and a external
36 Represents the data and control interface between the main processor
133 enables communications between the Broadway and the Starlet processors.
Dgamecube.txt16 Represents the interface between the graphics processor and a external
27 Represents the data and control interface between the main processor
/linux-4.4.14/Documentation/filesystems/pohmelfs/
Ddesign_notes.txt25 * Client is able to switch between different servers (if one goes down, client
29 * Read request (data read, directory listing, lookup requests) balancing between multiple servers.
59 operations (like lookups or directory listings) between them according to IO priorities.
/linux-4.4.14/Documentation/networking/
Daltera_tse.txt10 cases are simple communications between an embedded system and an external peer
232 between 65 and 127 octets in length inclusive.
236 between 128 and 255 octets in length inclusive.
240 between 256 and 511 octets in length inclusive.
244 between 512 and 1023 octets in length inclusive.
248 between 1024 and 1518 octets in length inclusive.
252 frames between the length of 1519 and the maximum frame length configured
D6pack.txt12 6pack is a transmission protocol for data exchange between the PC and
17 channel. Special control data is exchanged between the PC and the TNC so
27 TNCs that are connected between each other and the PC by a daisy chain
67 is supplied with a DIP switch so you can easily change between the
72 of the EPROM between HIGH and LOW level. After having inserted the new EPROM
Dnetdev-features.txt73 All dependencies between features should be resolved here. The resulting
79 stateless). It can be called multiple times between successive
144 NETIF_F_NETNS_LOCAL is set for devices that are not allowed to move between
/linux-4.4.14/Documentation/locking/
Dlockdep-design.txt19 dependencies between different lock-classes. The validator maintains a
91 other locking sequence between the acquire-lock operations, the
92 validator will still track all dependencies between locks.)
95 between any two lock-classes:
108 any rule violation between the new lock and any of the held locks.
136 cases there is an inherent "natural" ordering between the two objects
195 possible combination of locking interaction between CPUs, combined with
/linux-4.4.14/Documentation/devicetree/bindings/i2c/
Di2c-gpio.txt12 - i2c-gpio,delay-us: delay between GPIO operations (may depend on each platform)
/linux-4.4.14/Documentation/devicetree/bindings/display/bridge/
Dthine,thc63lvdm83d.txt5 transmission between a host and a flat panel.
/linux-4.4.14/drivers/bluetooth/
DKconfig83 UART (H4) is serial protocol for communication between Bluetooth
95 between Bluetooth device and host. This protocol is required for non
107 communication between host and Atheros AR300x Bluetooth devices.
119 between Bluetooth device and host. This protocol is required for
166 over serial port interface(H4) between controller and host.
/linux-4.4.14/net/9p/
DKconfig22 This builds support for a transports between
/linux-4.4.14/Documentation/arm/SA1100/
DLART8 between 3.5V and 16V and is overdimensioned to support a range of
/linux-4.4.14/drivers/hwtracing/coresight/
DKconfig38 responsible for bridging the gap between the on-chip coresight
39 components and a trace for bridging the gap between the on-chip
/linux-4.4.14/Documentation/block/
Ddeadline-iosched.txt38 deadline expiries are only checked between batches. fifo_batch controls the
41 This parameter tunes the balance between per-request latency and aggregate
/linux-4.4.14/arch/m68k/fpsp040/
Dx_unfl.S196 | WARNING: a0 and d0 are assumed to be intact between the denorm and
197 | round subroutines. All code between these two subroutines
211 | Differentiate between store to memory vs. store to register
/linux-4.4.14/arch/alpha/lib/
Dstrncpy.S36 or $3, $24, $3 # clear the bits between the last
/linux-4.4.14/Documentation/devicetree/bindings/hwlock/
Dqcom-hwspinlock.txt3 The hardware block provides mutexes utilized between different processors on
/linux-4.4.14/net/vmw_vsock/
DKconfig9 allowing communication between Virtual Machines and hypervisor
/linux-4.4.14/Documentation/devicetree/bindings/gpio/
Dnxp,lpc1850-gpio.txt14 - gpio-ranges : Mapping between GPIO and pinctrl
Dgpio-samsung.txt18 - Pin number: is a value between 0 to 7.
/linux-4.4.14/Documentation/devicetree/bindings/input/touchscreen/
Dsun4i.txt16 between 0 (least sensitive) and 15
/linux-4.4.14/Documentation/x86/x86_64/
Dfake-numa-for-cpusets56 Notice the difference between the system memory usage as reported by
57 /proc/meminfo between the restricted cpuset case above and the unrestricted
/linux-4.4.14/Documentation/virtual/kvm/
Dmsr.txt68 write, or registration, is needed for each VCPU. The interval between
110 coordinated between the guest and the hypervisor. Availability
215 write, or registration, is needed for each VCPU. The interval between
261 in the window between guest testing it to detect
262 whether it can skip EOI apic write and between guest
/linux-4.4.14/sound/spi/
DKconfig33 Limited by hardware to be between 8000 Hz and 50000 Hz.
/linux-4.4.14/drivers/w1/
DKconfig22 There are three types of messages between w1 core and userspace:
/linux-4.4.14/Documentation/cpuidle/
Dgovernor.txt21 users can switch between drivers using /sysfs interface (when enabled).
/linux-4.4.14/Documentation/i2c/
Di2c-protocol76 I2C device but may also be used between direction changes by some
88 between the messages of one transfer.
/linux-4.4.14/Documentation/mic/
Dscif_overview.txt32 DMA bandwidth comparison between the TCP (over ethernet over PCIe) stack versus
60 SCIF allows memory sharing via mmap(..) between processes on different PCIe
/linux-4.4.14/Documentation/devicetree/bindings/leds/
Dleds-ns2.txt11 - modes-map: A mapping between LED modes (off, on or SATA activity blinking) and
/linux-4.4.14/Documentation/ko_KR/
Dstable_api_nonsense.txt5 If you find any difference between this document and the original file or
/linux-4.4.14/drivers/sh/intc/
DKconfig39 between system IRQs and the per-controller id tables.
/linux-4.4.14/Documentation/devicetree/bindings/usb/
Dkeystone-usb.txt13 - ranges: allows valid 1:1 translation between child's address space and
/linux-4.4.14/drivers/gpu/vga/
DKconfig27 to switch between them. This adds support for dynamic switching when
/linux-4.4.14/Documentation/devicetree/bindings/soc/qcom/
Dqcom,smem.txt4 between various subsystems and OSes in Qualcomm platforms.
/linux-4.4.14/drivers/staging/android/ion/
DKconfig9 from userspace that can be shared between drivers.
/linux-4.4.14/Documentation/RCU/
Dtorture.txt36 bursts help force races between forcing a given grace
39 fqs_holdoff Holdoff time (in microseconds) between consecutive calls
42 fqs_stutter Wait time (in seconds) between consecutive bursts
73 torture_type, with a delay between calls to allow for various
85 The number of seconds between each attempt to execute a
127 stat_interval The number of seconds between output of torture
/linux-4.4.14/drivers/usb/wusbcore/
DKconfig23 enable the secure communication between the host and the
/linux-4.4.14/Documentation/power/regulator/
Ddesign.txt28 - Many of the power supplies in the system will be shared between many
/linux-4.4.14/Documentation/devicetree/bindings/iio/light/
Dus5182d.txt21 sensor on evaluation board - roughly between 12-32 lux.
/linux-4.4.14/Documentation/ABI/stable/
Dfirewire-cdev6 The character device files /dev/fw* are the interface between
21 - Query maximum speed of the path between this node
/linux-4.4.14/drivers/auxdisplay/
DKconfig59 int "Delay between each control writing (microseconds)"
63 Amount of time the ks0108 should wait between each control write
/linux-4.4.14/Documentation/scheduler/
Dsched-deadline.txt40 that makes it possible to isolate the behavior of tasks between each other.
61 interference between different tasks (bandwidth isolation), while the EDF[1]
150 The utilization of a real-time task is defined as the ratio between its
167 for tardiness (defined as the maximum between 0 and the difference
168 between the finishing time of a job and its absolute deadline).
211 between 0 and a maximum value L. The cited papers contain all of the
244 between total utilization (or density) and a fixed constant. If all tasks
268 Finally, it is important to understand the relationship between the
347 the sum of the ratio between runtime and period for all tasks is smaller
361 A main difference between deadline bandwidth management and RT-throttling
[all …]
/linux-4.4.14/arch/arm/plat-samsung/
DKconfig37 this configuration should be between zero and two. The port
55 int "Space between gpio banks"
58 Add a number of spare GPIO entries between each bank for debugging
/linux-4.4.14/scripts/coccinelle/misc/
Difcol.cocci7 /// calculation does not distinguish between spaces and tabs, so code that
/linux-4.4.14/Documentation/devicetree/bindings/display/panel/
Dsharp,ls037v7dw01.txt20 between QVGA and VGA mode and the scan direction. As these pins can be also

12345